From 799ab3f4e036ec3d63bec5645b65f51251d895ff Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 16 Aug 2017 19:15:03 +0530 Subject: [PATCH] ARM: dts: am57xx-idk: Move common MMC/SD properties to common file AM572x IDK and AM571x IDK boards have equivalent design of how SD card and eMMC are connected. The two EVMs mainly differ in IOdelay configuration needed (because of difference in SoC used). Move the common properties to am57xx-idk-common.dtsi file which is common for both EVMs. Signed-off-by: Sekhar Nori Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am571x-idk.dts | 7 ------- arch/arm/boot/dts/am572x-idk.dts | 8 -------- arch/arm/boot/dts/am57xx-idk-common.dtsi | 8 ++++++++ 3 files changed, 8 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 0c0bb4e93f25..78c5c7462fcc 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -64,13 +64,6 @@ mmc0-led { }; }; -&mmc1 { - status = "okay"; - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 604d52554eda..5b22944fedad 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -76,14 +76,6 @@ &extcon_usb2 { vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; }; -&mmc1 { - status = "okay"; - vmmc-supply = <&v3_3d>; - vqmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ -}; - &sn65hvs882 { load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index c536b2f5389f..97aa8e6a56da 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -399,6 +399,14 @@ &usb2 { dr_mode = "peripheral"; }; +&mmc1 { + status = "okay"; + vmmc-supply = <&v3_3d>; + vqmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ +}; + &mmc2 { status = "okay"; vmmc-supply = <&v3_3d>;