mirror of https://gitee.com/openkylin/linux.git
pwm: Add Raspberry Pi Firmware based PWM bus
Adds support to control the PWM bus available in official Raspberry Pi PoE HAT. Only RPi's co-processor has access to it, so commands have to be sent through RPi's firmware mailbox interface. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
parent
a953e68ef2
commit
79caa362ea
|
@ -423,6 +423,15 @@ config PWM_PXA
|
|||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-pxa.
|
||||
|
||||
config PWM_RASPBERRYPI_POE
|
||||
tristate "Raspberry Pi Firwmware PoE Hat PWM support"
|
||||
# Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only
|
||||
# happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE.
|
||||
depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
|
||||
help
|
||||
Enable Raspberry Pi firmware controller PWM bus used to control the
|
||||
official RPI PoE hat
|
||||
|
||||
config PWM_RCAR
|
||||
tristate "Renesas R-Car PWM support"
|
||||
depends on ARCH_RENESAS || COMPILE_TEST
|
||||
|
|
|
@ -38,6 +38,7 @@ obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
|
|||
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
|
||||
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
|
||||
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
|
||||
obj-$(CONFIG_PWM_RASPBERRYPI_POE) += pwm-raspberrypi-poe.o
|
||||
obj-$(CONFIG_PWM_RCAR) += pwm-rcar.o
|
||||
obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
|
||||
obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
|
||||
|
|
|
@ -0,0 +1,206 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright 2021 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
||||
* For more information on Raspberry Pi's PoE hat see:
|
||||
* https://www.raspberrypi.org/products/poe-hat/
|
||||
*
|
||||
* Limitations:
|
||||
* - No disable bit, so a disabled PWM is simulated by duty_cycle 0
|
||||
* - Only normal polarity
|
||||
* - Fixed 12.5 kHz period
|
||||
*
|
||||
* The current period is completed when HW is reconfigured.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
|
||||
#include <soc/bcm2835/raspberrypi-firmware.h>
|
||||
#include <dt-bindings/pwm/raspberrypi,firmware-poe-pwm.h>
|
||||
|
||||
#define RPI_PWM_MAX_DUTY 255
|
||||
#define RPI_PWM_PERIOD_NS 80000 /* 12.5 kHz */
|
||||
|
||||
#define RPI_PWM_CUR_DUTY_REG 0x0
|
||||
|
||||
struct raspberrypi_pwm {
|
||||
struct rpi_firmware *firmware;
|
||||
struct pwm_chip chip;
|
||||
unsigned int duty_cycle;
|
||||
};
|
||||
|
||||
struct raspberrypi_pwm_prop {
|
||||
__le32 reg;
|
||||
__le32 val;
|
||||
__le32 ret;
|
||||
} __packed;
|
||||
|
||||
static inline
|
||||
struct raspberrypi_pwm *raspberrypi_pwm_from_chip(struct pwm_chip *chip)
|
||||
{
|
||||
return container_of(chip, struct raspberrypi_pwm, chip);
|
||||
}
|
||||
|
||||
static int raspberrypi_pwm_set_property(struct rpi_firmware *firmware,
|
||||
u32 reg, u32 val)
|
||||
{
|
||||
struct raspberrypi_pwm_prop msg = {
|
||||
.reg = cpu_to_le32(reg),
|
||||
.val = cpu_to_le32(val),
|
||||
};
|
||||
int ret;
|
||||
|
||||
ret = rpi_firmware_property(firmware, RPI_FIRMWARE_SET_POE_HAT_VAL,
|
||||
&msg, sizeof(msg));
|
||||
if (ret)
|
||||
return ret;
|
||||
if (msg.ret)
|
||||
return -EIO;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int raspberrypi_pwm_get_property(struct rpi_firmware *firmware,
|
||||
u32 reg, u32 *val)
|
||||
{
|
||||
struct raspberrypi_pwm_prop msg = {
|
||||
.reg = reg
|
||||
};
|
||||
int ret;
|
||||
|
||||
ret = rpi_firmware_property(firmware, RPI_FIRMWARE_GET_POE_HAT_VAL,
|
||||
&msg, sizeof(msg));
|
||||
if (ret)
|
||||
return ret;
|
||||
if (msg.ret)
|
||||
return -EIO;
|
||||
|
||||
*val = le32_to_cpu(msg.val);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void raspberrypi_pwm_get_state(struct pwm_chip *chip,
|
||||
struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip);
|
||||
|
||||
state->period = RPI_PWM_PERIOD_NS;
|
||||
state->duty_cycle = DIV_ROUND_UP(rpipwm->duty_cycle * RPI_PWM_PERIOD_NS,
|
||||
RPI_PWM_MAX_DUTY);
|
||||
state->enabled = !!(rpipwm->duty_cycle);
|
||||
state->polarity = PWM_POLARITY_NORMAL;
|
||||
}
|
||||
|
||||
static int raspberrypi_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
const struct pwm_state *state)
|
||||
{
|
||||
struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip);
|
||||
unsigned int duty_cycle;
|
||||
int ret;
|
||||
|
||||
if (state->period < RPI_PWM_PERIOD_NS ||
|
||||
state->polarity != PWM_POLARITY_NORMAL)
|
||||
return -EINVAL;
|
||||
|
||||
if (!state->enabled)
|
||||
duty_cycle = 0;
|
||||
else if (state->duty_cycle < RPI_PWM_PERIOD_NS)
|
||||
duty_cycle = DIV_ROUND_DOWN_ULL(state->duty_cycle * RPI_PWM_MAX_DUTY,
|
||||
RPI_PWM_PERIOD_NS);
|
||||
else
|
||||
duty_cycle = RPI_PWM_MAX_DUTY;
|
||||
|
||||
if (duty_cycle == rpipwm->duty_cycle)
|
||||
return 0;
|
||||
|
||||
ret = raspberrypi_pwm_set_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG,
|
||||
duty_cycle);
|
||||
if (ret) {
|
||||
dev_err(chip->dev, "Failed to set duty cycle: %pe\n",
|
||||
ERR_PTR(ret));
|
||||
return ret;
|
||||
}
|
||||
|
||||
rpipwm->duty_cycle = duty_cycle;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_ops raspberrypi_pwm_ops = {
|
||||
.get_state = raspberrypi_pwm_get_state,
|
||||
.apply = raspberrypi_pwm_apply,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int raspberrypi_pwm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *firmware_node;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct rpi_firmware *firmware;
|
||||
struct raspberrypi_pwm *rpipwm;
|
||||
int ret;
|
||||
|
||||
firmware_node = of_get_parent(dev->of_node);
|
||||
if (!firmware_node) {
|
||||
dev_err(dev, "Missing firmware node\n");
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
firmware = devm_rpi_firmware_get(&pdev->dev, firmware_node);
|
||||
of_node_put(firmware_node);
|
||||
if (!firmware)
|
||||
return dev_err_probe(dev, -EPROBE_DEFER,
|
||||
"Failed to get firmware handle\n");
|
||||
|
||||
rpipwm = devm_kzalloc(&pdev->dev, sizeof(*rpipwm), GFP_KERNEL);
|
||||
if (!rpipwm)
|
||||
return -ENOMEM;
|
||||
|
||||
rpipwm->firmware = firmware;
|
||||
rpipwm->chip.dev = dev;
|
||||
rpipwm->chip.ops = &raspberrypi_pwm_ops;
|
||||
rpipwm->chip.base = -1;
|
||||
rpipwm->chip.npwm = RASPBERRYPI_FIRMWARE_PWM_NUM;
|
||||
|
||||
platform_set_drvdata(pdev, rpipwm);
|
||||
|
||||
ret = raspberrypi_pwm_get_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG,
|
||||
&rpipwm->duty_cycle);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to get duty cycle: %pe\n", ERR_PTR(ret));
|
||||
return ret;
|
||||
}
|
||||
|
||||
return pwmchip_add(&rpipwm->chip);
|
||||
}
|
||||
|
||||
static int raspberrypi_pwm_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct raspberrypi_pwm *rpipwm = platform_get_drvdata(pdev);
|
||||
|
||||
return pwmchip_remove(&rpipwm->chip);
|
||||
}
|
||||
|
||||
static const struct of_device_id raspberrypi_pwm_of_match[] = {
|
||||
{ .compatible = "raspberrypi,firmware-poe-pwm", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, raspberrypi_pwm_of_match);
|
||||
|
||||
static struct platform_driver raspberrypi_pwm_driver = {
|
||||
.driver = {
|
||||
.name = "raspberrypi-poe-pwm",
|
||||
.of_match_table = raspberrypi_pwm_of_match,
|
||||
},
|
||||
.probe = raspberrypi_pwm_probe,
|
||||
.remove = raspberrypi_pwm_remove,
|
||||
};
|
||||
module_platform_driver(raspberrypi_pwm_driver);
|
||||
|
||||
MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
|
||||
MODULE_DESCRIPTION("Raspberry Pi Firmware Based PWM Bus Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue