dt-bindings: PCI: rockchip: Convert to per-lane PHY model

Deprecate legacy PHY model and encourage per-lane PHY model.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Shawn Lin 2017-07-19 17:57:57 +08:00 committed by Bjorn Helgaas
parent e9a60cac89
commit 7a55b57031
1 changed files with 23 additions and 2 deletions

View File

@ -19,8 +19,6 @@ Required properties:
- "pm"
- msi-map: Maps a Requester ID to an MSI controller and associated
msi-specifier data. See ./pci-msi.txt
- phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
- phy-names: MUST be "pcie-phy".
- interrupts: Three interrupt entries must be specified.
- interrupt-names: Must include the following names
- "sys"
@ -42,6 +40,18 @@ Required properties:
interrupt source. The value must be 1.
- interrupt-map-mask and interrupt-map: standard PCI properties
Required properties for legacy PHY model (deprecated):
- phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
- phy-names: MUST be "pcie-phy".
Required properties for per-lane PHY model (preferred):
- phys: Must contain an phandle to a PHY for each entry in phy-names.
- phy-names: Must include 4 entries for all 4 lanes even if some of
them won't be used for your cases. Entries are of the form "pcie-phy-N":
where N ranges from 0 to 3.
(see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
for changing the #phy-cells of phy node to support it)
Optional Property:
- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if
using 24MHz OSC for RC's PHY.
@ -96,6 +106,7 @@ pcie0: pcie@f8000000 {
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
"pm", "pclk", "aclk";
/* deprecated legacy PHY model */
phys = <&pcie_phy>;
phy-names = "pcie-phy";
pinctrl-names = "default";
@ -112,3 +123,13 @@ pcie0: pcie@f8000000 {
#interrupt-cells = <1>;
};
};
pcie0: pcie@f8000000 {
...
/* preferred per-lane PHY model */
phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
...
};