From 5448bd8ca139bf8f82b93e10acbc2691cd983a45 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 2 Apr 2013 18:39:53 +0200 Subject: [PATCH 1/4] tty: Documentation: fix a path in a DocBook template A wrong path to a driver breaks DocBook built. Signed-off-by: Guennadi Liakhovetski Acked-by: Randy Dunlap Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/device-drivers.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 7514dbf0a679..c36892c072da 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -227,7 +227,7 @@ X!Isound/sound_firmware.c 16x50 UART Driver !Edrivers/tty/serial/serial_core.c -!Edrivers/tty/serial/8250/8250.c +!Edrivers/tty/serial/8250/8250_core.c From 1f66396682a0be92e1c141bff4b006d7654832e1 Mon Sep 17 00:00:00 2001 From: Alexey Pelykh Date: Wed, 3 Apr 2013 14:31:46 -0400 Subject: [PATCH 2/4] OMAP/serial: Revert bad fix of Rx FIFO threshold granularity Partially reverts 1776fd059c40907297d6c26c51876575d63fd9e2 that introduced regression reported by Paul Walmsley. This commit restores setting granularity in SCR register and adds note about comments below being inconsistent with actual code. Signed-off-by: Alexey Pelykh Tested-by: Paul Walmsley Cc: Kevin Hilman Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 4dc41408ecb7..30d4f7a783cd 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -886,6 +886,17 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); /* FIFO ENABLE, DMA MODE */ + up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; + /* + * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK + * sets Enables the granularity of 1 for TRIGGER RX + * level. Along with setting RX FIFO trigger level + * to 1 (as noted below, 16 characters) and TLR[3:0] + * to zero this will result RX FIFO threshold level + * to 1 character, instead of 16 as noted in comment + * below. + */ + /* Set receive FIFO threshold to 16 characters and * transmit FIFO threshold to 16 spaces */ From c12f9ea28e9fbe7b1f4cefc953bee33298370683 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sun, 7 Apr 2013 20:47:18 +0100 Subject: [PATCH 3/4] Revert "tty/8250_pnp: serial port detection regression since v3.7" This reverts commit 77e372a3d82e5e4878ce1962207edd766773cc76. Checking for disabled resources board breaks detection pnp on another board "AMI UEFI implementation (Version: 0406 Release Date: 06/06/2012)". I'm working with the reporter of the original bug to write and test a better fix. https://bugzilla.redhat.com/show_bug.cgi?id=928246 Signed-off-by: Sean Young Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pnp.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index b3455a970a1d..35d9ab95c5cb 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -429,7 +429,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { struct uart_8250_port uart; int ret, line, flags = dev_id->driver_data; - struct resource *res = NULL; if (flags & UNKNOWN_DEV) { ret = serial_pnp_guess_board(dev); @@ -440,12 +439,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&uart, 0, sizeof(uart)); if (pnp_irq_valid(dev, 0)) uart.port.irq = pnp_irq(dev, 0); - if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) - res = pnp_get_resource(dev, IORESOURCE_IO, 2); - else if (pnp_port_valid(dev, 0)) - res = pnp_get_resource(dev, IORESOURCE_IO, 0); - if (pnp_resource_enabled(res)) { - uart.port.iobase = res->start; + if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) { + uart.port.iobase = pnp_port_start(dev, 2); + uart.port.iotype = UPIO_PORT; + } else if (pnp_port_valid(dev, 0)) { + uart.port.iobase = pnp_port_start(dev, 0); uart.port.iotype = UPIO_PORT; } else if (pnp_mem_valid(dev, 0)) { uart.port.mapbase = pnp_mem_start(dev, 0); From 1b581f173992cded311f810346378f763a1f1e5d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sun, 7 Apr 2013 23:46:47 +0400 Subject: [PATCH 4/4] tty: mxser: fix cycle termination condition in mxser_probe() and mxser_module_init() There is a bug in resources deallocation code in mxser_probe() and mxser_module_init(). As soon as variable 'i' is unsigned int, cycle termination condition i >= 0 is always true. The patch fixes the issue. Signed-off-by: Alexey Khoroshilov Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/mxser.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 484b6a3c9b03..302909ccf183 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -2643,9 +2643,9 @@ static int mxser_probe(struct pci_dev *pdev, mxvar_sdriver, brd->idx + i, &pdev->dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); - for (i--; i >= 0; i--) + for (; i > 0; i--) tty_unregister_device(mxvar_sdriver, - brd->idx + i); + brd->idx + i - 1); goto err_relbrd; } } @@ -2751,9 +2751,9 @@ static int __init mxser_module_init(void) tty_dev = tty_port_register_device(&brd->ports[i].port, mxvar_sdriver, brd->idx + i, NULL); if (IS_ERR(tty_dev)) { - for (i--; i >= 0; i--) + for (; i > 0; i--) tty_unregister_device(mxvar_sdriver, - brd->idx + i); + brd->idx + i - 1); for (i = 0; i < brd->info->nports; i++) tty_port_destroy(&brd->ports[i].port); free_irq(brd->irq, brd);