mirror of https://gitee.com/openkylin/linux.git
dt-bindings: regulator: add pca9450 regulator yaml
Add device binding doc for pca9450 pmic driver. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1593793178-9737-3-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Robin Gong
Mark Brown
parent
0935ff5f1f
commit
7ae9e3a6bf
|
|
@ -0,0 +1,190 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators
|
||||
|
||||
maintainers:
|
||||
- Robin Gong <yibin.gong@nxp.com>
|
||||
|
||||
description: |
|
||||
Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
|
||||
definition for each of these nodes is defined using the standard
|
||||
binding for regulators at
|
||||
Documentation/devicetree/bindings/regulator/regulator.txt.
|
||||
Datasheet is available at
|
||||
https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf
|
||||
|
||||
#The valid names for PCA9450 regulator nodes are:
|
||||
#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
|
||||
#LDO1, LDO2, LDO3, LDO4, LDO5
|
||||
#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- nxp,pca9450a
|
||||
- nxp,pca9450b
|
||||
- nxp,pca9450c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
regulators:
|
||||
type: object
|
||||
description: |
|
||||
list of regulators provided by this controller
|
||||
|
||||
patternProperties:
|
||||
"^LDO[1-5]$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
description:
|
||||
Properties for single LDO regulator.
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
pattern: "^LDO[1-5]$"
|
||||
description:
|
||||
should be "LDO1", ..., "LDO5"
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
"^BUCK[1-6]$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
description:
|
||||
Properties for single BUCK regulator.
|
||||
|
||||
properties:
|
||||
regulator-name:
|
||||
pattern: "^BUCK[1-6]$"
|
||||
description:
|
||||
should be "BUCK1", ..., "BUCK6"
|
||||
|
||||
nxp,dvs-run-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
minimum: 600000
|
||||
maximum: 2187500
|
||||
description:
|
||||
PMIC default "RUN" state voltage in uV. Only Buck1~3 have such
|
||||
dvs(dynamic voltage scaling) property.
|
||||
|
||||
nxp,dvs-standby-voltage:
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
minimum: 600000
|
||||
maximum: 2187500
|
||||
description:
|
||||
PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
|
||||
dvs(dynamic voltage scaling) property.
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- regulators
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pmic: pmic@25 {
|
||||
compatible = "nxp,pca9450b";
|
||||
reg = <0x25>;
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
regulators {
|
||||
buck1: BUCK1 {
|
||||
regulator-name = "BUCK1";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <2187500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <3125>;
|
||||
};
|
||||
buck2: BUCK2 {
|
||||
regulator-name = "BUCK2";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <2187500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <3125>;
|
||||
nxp,dvs-run-voltage = <950000>;
|
||||
nxp,dvs-standby-voltage = <850000>;
|
||||
};
|
||||
buck4: BUCK4 {
|
||||
regulator-name = "BUCK4";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
buck5: BUCK5 {
|
||||
regulator-name = "BUCK5";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
buck6: BUCK6 {
|
||||
regulator-name = "BUCK6";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1: LDO1 {
|
||||
regulator-name = "LDO1";
|
||||
regulator-min-microvolt = <1600000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
ldo2: LDO2 {
|
||||
regulator-name = "LDO2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
ldo3: LDO3 {
|
||||
regulator-name = "LDO3";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
ldo4: LDO4 {
|
||||
regulator-name = "LDO4";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
ldo5: LDO5 {
|
||||
regulator-name = "LDO5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue