diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd new file mode 100644 index 000000000000..90a87e2a572b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -0,0 +1,83 @@ +What: /sys/bus/rbd/ +Date: November 2010 +Contact: Yehuda Sadeh , + Sage Weil +Description: + +Being used for adding and removing rbd block devices. + +Usage: [snap name] + + $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add + +The snapshot name can be "-" or omitted to map the image read/write. A +will be assigned for any registered block device. If snapshot is used, it will +be mapped read-only. + +Removal of a device: + + $ echo > /sys/bus/rbd/remove + +Entries under /sys/bus/rbd/devices// +-------------------------------------------- + +client_id + + The ceph unique client id that was assigned for this specific session. + +major + + The block device major number. + +name + + The name of the rbd image. + +pool + + The pool where this rbd image resides. The pool-name pair is unique + per rados system. + +size + + The size (in bytes) of the mapped block device. + +refresh + + Writing to this file will reread the image header data and set + all relevant datastructures accordingly. + +current_snap + + The current snapshot for which the device is mapped. + +create_snap + + Create a snapshot: + + $ echo > /sys/bus/rbd/devices//snap_create + +rollback_snap + + Rolls back data to the specified snapshot. This goes over the entire + list of rados blocks and sends a rollback command to each. + + $ echo > /sys/bus/rbd/devices//snap_rollback + +snap_* + + A directory per each snapshot + + +Entries under /sys/bus/rbd/devices//snap_ +------------------------------------------------------------- + +id + + The rados internal snapshot id assigned for this snapshot + +size + + The size of the image when this snapshot was taken. + + diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop index 1d775390e856..41ff8ae4dee0 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -47,6 +47,20 @@ Date: January 2007 KernelVersion: 2.6.20 Contact: "Corentin Chary" Description: - Control the bluetooth device. 1 means on, 0 means off. + Control the wlan device. 1 means on, 0 means off. This may control the led, the device or both. Users: Lapsus + +What: /sys/devices/platform/asus_laptop/wimax +Date: October 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Control the wimax device. 1 means on, 0 means off. + +What: /sys/devices/platform/asus_laptop/wwan +Date: October 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Control the wwan (3G) device. 1 means on, 0 means off. diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi new file mode 100644 index 000000000000..e4b5fef5fadd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi @@ -0,0 +1,10 @@ +What: /sys/devices/platform/eeepc-wmi/cpufv +Date: Oct 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Change CPU clock configuration (write-only). + There are three available clock configuration: + * 0 -> Super Performance Mode + * 1 -> High Performance Mode + * 2 -> Power Saving Mode diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl index d858d92cf6d9..4a38f604fa66 100644 --- a/Documentation/DocBook/sh.tmpl +++ b/Documentation/DocBook/sh.tmpl @@ -79,10 +79,6 @@ - - Clock Framework Extensions -!Iinclude/linux/sh_clk.h - Machine Specific Interfaces diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 4d4ce0e61e42..b4665b9c40b0 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -16,7 +16,7 @@
- hjk@linutronix.de + hjk@hansjkoch.de
@@ -114,7 +114,7 @@ GPL version 2. If you know of any translations for this document, or you are interested in translating it, please email me -hjk@linutronix.de. +hjk@hansjkoch.de. @@ -171,7 +171,7 @@ interested in translating it, please email me Feedback Find something wrong with this document? (Or perhaps something right?) I would love to hear from you. Please email me at - hjk@linutronix.de. + hjk@hansjkoch.de. diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process index 97726eba6102..911a45186340 100644 --- a/Documentation/development-process/2.Process +++ b/Documentation/development-process/2.Process @@ -154,7 +154,7 @@ The stages that a patch goes through are, generally: inclusion, it should be accepted by a relevant subsystem maintainer - though this acceptance is not a guarantee that the patch will make it all the way to the mainline. The patch will show up in the maintainer's - subsystem tree and into the staging trees (described below). When the + subsystem tree and into the -next trees (described below). When the process works, this step leads to more extensive review of the patch and the discovery of any problems resulting from the integration of this patch with work being done by others. @@ -236,7 +236,7 @@ finding the right maintainer. Sending patches directly to Linus is not normally the right way to go. -2.4: STAGING TREES +2.4: NEXT TREES The chain of subsystem trees guides the flow of patches into the kernel, but it also raises an interesting question: what if somebody wants to look @@ -250,7 +250,7 @@ changes land in the mainline kernel. One could pull changes from all of the interesting subsystem trees, but that would be a big and error-prone job. -The answer comes in the form of staging trees, where subsystem trees are +The answer comes in the form of -next trees, where subsystem trees are collected for testing and review. The older of these trees, maintained by Andrew Morton, is called "-mm" (for memory management, which is how it got started). The -mm tree integrates patches from a long list of subsystem @@ -275,7 +275,7 @@ directory at: Use of the MMOTM tree is likely to be a frustrating experience, though; there is a definite chance that it will not even compile. -The other staging tree, started more recently, is linux-next, maintained by +The other -next tree, started more recently, is linux-next, maintained by Stephen Rothwell. The linux-next tree is, by design, a snapshot of what the mainline is expected to look like after the next merge window closes. Linux-next trees are announced on the linux-kernel and linux-next mailing @@ -303,12 +303,25 @@ volatility of linux-next tends to make it a difficult development target. See http://lwn.net/Articles/289013/ for more information on this topic, and stay tuned; much is still in flux where linux-next is involved. -Besides the mmotm and linux-next trees, the kernel source tree now contains -the drivers/staging/ directory and many sub-directories for drivers or -filesystems that are on their way to being added to the kernel tree -proper, but they remain in drivers/staging/ while they still need more -work. +2.4.1: STAGING TREES +The kernel source tree now contains the drivers/staging/ directory, where +many sub-directories for drivers or filesystems that are on their way to +being added to the kernel tree live. They remain in drivers/staging while +they still need more work; once complete, they can be moved into the +kernel proper. This is a way to keep track of drivers that aren't +up to Linux kernel coding or quality standards, but people may want to use +them and track development. + +Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree. +Drivers that still need work are sent to him, with each driver having +its own subdirectory in drivers/staging/. Along with the driver source +files, a TODO file should be present in the directory as well. The TODO +file lists the pending work that the driver needs for acceptance into +the kernel proper, as well as a list of people that should be Cc'd for any +patches to the driver. Staging drivers that don't currently build should +have their config entries depend upon CONFIG_BROKEN. Once they can +be successfully built without outside patches, CONFIG_BROKEN can be removed. 2.5: TOOLS diff --git a/Documentation/driver-model/interface.txt b/Documentation/driver-model/interface.txt deleted file mode 100644 index c66912bfe866..000000000000 --- a/Documentation/driver-model/interface.txt +++ /dev/null @@ -1,129 +0,0 @@ - -Device Interfaces - -Introduction -~~~~~~~~~~~~ - -Device interfaces are the logical interfaces of device classes that correlate -directly to userspace interfaces, like device nodes. - -Each device class may have multiple interfaces through which you can -access the same device. An input device may support the mouse interface, -the 'evdev' interface, and the touchscreen interface. A SCSI disk would -support the disk interface, the SCSI generic interface, and possibly a raw -device interface. - -Device interfaces are registered with the class they belong to. As devices -are added to the class, they are added to each interface registered with -the class. The interface is responsible for determining whether the device -supports the interface or not. - - -Programming Interface -~~~~~~~~~~~~~~~~~~~~~ - -struct device_interface { - char * name; - rwlock_t lock; - u32 devnum; - struct device_class * devclass; - - struct list_head node; - struct driver_dir_entry dir; - - int (*add_device)(struct device *); - int (*add_device)(struct intf_data *); -}; - -int interface_register(struct device_interface *); -void interface_unregister(struct device_interface *); - - -An interface must specify the device class it belongs to. It is added -to that class's list of interfaces on registration. - - -Interfaces can be added to a device class at any time. Whenever it is -added, each device in the class is passed to the interface's -add_device callback. When an interface is removed, each device is -removed from the interface. - - -Devices -~~~~~~~ -Once a device is added to a device class, it is added to each -interface that is registered with the device class. The class -is expected to place a class-specific data structure in -struct device::class_data. The interface can use that (along with -other fields of struct device) to determine whether or not the driver -and/or device support that particular interface. - - -Data -~~~~ - -struct intf_data { - struct list_head node; - struct device_interface * intf; - struct device * dev; - u32 intf_num; -}; - -int interface_add_data(struct interface_data *); - -The interface is responsible for allocating and initializing a struct -intf_data and calling interface_add_data() to add it to the device's list -of interfaces it belongs to. This list will be iterated over when the device -is removed from the class (instead of all possible interfaces for a class). -This structure should probably be embedded in whatever per-device data -structure the interface is allocating anyway. - -Devices are enumerated within the interface. This happens in interface_add_data() -and the enumerated value is stored in the struct intf_data for that device. - -sysfs -~~~~~ -Each interface is given a directory in the directory of the device -class it belongs to: - -Interfaces get a directory in the class's directory as well: - - class/ - `-- input - |-- devices - |-- drivers - |-- mouse - `-- evdev - -When a device is added to the interface, a symlink is created that points -to the device's directory in the physical hierarchy: - - class/ - `-- input - |-- devices - | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - |-- drivers - | `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/ - |-- mouse - | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - `-- evdev - `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - - -Future Plans -~~~~~~~~~~~~ -A device interface is correlated directly with a userspace interface -for a device, specifically a device node. For instance, a SCSI disk -exposes at least two interfaces to userspace: the standard SCSI disk -interface and the SCSI generic interface. It might also export a raw -device interface. - -Many interfaces have a major number associated with them and each -device gets a minor number. Or, multiple interfaces might share one -major number, and each will receive a range of minor numbers (like in -the case of input devices). - -These major and minor numbers could be stored in the interface -structure. Major and minor allocations could happen when the interface -is registered with the class, or via a helper function. - diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 0b875e8da969..9ee774de57cd 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -196,7 +196,7 @@ csrow3. The representation of the above is reflected in the directory tree in EDAC's sysfs interface. Starting in directory /sys/devices/system/edac/mc each memory controller will be represented -by its own 'mcX' directory, where 'X" is the index of the MC. +by its own 'mcX' directory, where 'X' is the index of the MC. ..../edac/mc/ @@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC. .... Under each 'mcX' directory each 'csrowX' is again represented by a -'csrowX', where 'X" is the csrow index: +'csrowX', where 'X' is the csrow index: .../mc/mc0/ @@ -232,7 +232,7 @@ EDAC control and attribute files. In 'mcX' directories are EDAC control and attribute files for -this 'X" instance of the memory controllers: +this 'X' instance of the memory controllers: Counter reset control file: @@ -343,7 +343,7 @@ Sdram memory scrubbing rate: 'csrowX' DIRECTORIES In the 'csrowX' directories are EDAC control and attribute files for -this 'X" instance of csrow: +this 'X' instance of csrow: Total Uncorrectable Errors count attribute file: diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX index a618fd99c9f0..30a70542e823 100644 --- a/Documentation/fb/00-INDEX +++ b/Documentation/fb/00-INDEX @@ -4,33 +4,41 @@ please mail me. Geert Uytterhoeven 00-INDEX - - this file + - this file. arkfb.txt - info on the fbdev driver for ARK Logic chips. aty128fb.txt - info on the ATI Rage128 frame buffer driver. cirrusfb.txt - info on the driver for Cirrus Logic chipsets. +cmap_xfbdev.txt + - an introduction to fbdev's cmap structures. deferred_io.txt - an introduction to deferred IO. +efifb.txt + - info on the EFI platform driver for Intel based Apple computers. +ep93xx-fb.txt + - info on the driver for EP93xx LCD controller. fbcon.txt - intro to and usage guide for the framebuffer console (fbcon). framebuffer.txt - introduction to frame buffer devices. -imacfb.txt - - info on the generic EFI platform driver for Intel based Macs. +gxfb.txt + - info on the framebuffer driver for AMD Geode GX2 based processors. intel810.txt - documentation for the Intel 810/815 framebuffer driver. intelfb.txt - docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver. internals.txt - quick overview of frame buffer device internals. +lxfb.txt + - info on the framebuffer driver for AMD Geode LX based processors. matroxfb.txt - info on the Matrox framebuffer driver for Alpha, Intel and PPC. +metronomefb.txt + - info on the driver for the Metronome display controller. modedb.txt - info on the video mode database. -matroxfb.txt - - info on the Matrox frame buffer driver. pvr2fb.txt - info on the PowerVR 2 frame buffer driver. pxafb.txt @@ -39,13 +47,23 @@ s3fb.txt - info on the fbdev driver for S3 Trio/Virge chips. sa1100fb.txt - information about the driver for the SA-1100 LCD controller. +sh7760fb.txt + - info on the SH7760/SH7763 integrated LCDC Framebuffer driver. sisfb.txt - info on the framebuffer device driver for various SiS chips. sstfb.txt - info on the frame buffer driver for 3dfx' Voodoo Graphics boards. tgafb.txt - - info on the TGA (DECChip 21030) frame buffer driver + - info on the TGA (DECChip 21030) frame buffer driver. +tridentfb.txt + info on the framebuffer driver for some Trident chip based cards. +uvesafb.txt + - info on the userspace VESA (VBE2+ compliant) frame buffer device. vesafb.txt - - info on the VESA frame buffer device + - info on the VESA frame buffer device. +viafb.modes + - list of modes for VIA Integration Graphic Chip. +viafb.txt + - info on the VIA Integration Graphic Chip console framebuffer driver. vt8623fb.txt - info on the fb driver for the graphics core in VIA VT8623 chipsets. diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index a91f30890011..b6426f15b4ae 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -173,12 +173,13 @@ prototypes: sector_t (*bmap)(struct address_space *, sector_t); int (*invalidatepage) (struct page *, unsigned long); int (*releasepage) (struct page *, int); + void (*freepage)(struct page *); int (*direct_IO)(int, struct kiocb *, const struct iovec *iov, loff_t offset, unsigned long nr_segs); int (*launder_page) (struct page *); locking rules: - All except set_page_dirty may block + All except set_page_dirty and freepage may block BKL PageLocked(page) i_mutex writepage: no yes, unlocks (see below) @@ -193,6 +194,7 @@ perform_write: no n/a yes bmap: no invalidatepage: no yes releasepage: no yes +freepage: no yes direct_IO: no launder_page: no yes @@ -288,6 +290,9 @@ buffers from the page in preparation for freeing it. It returns zero to indicate that the buffers are (or may be) freeable. If ->releasepage is zero, the kernel assumes that the fs has no private interest in the buffers. + ->freepage() is called when the kernel is done dropping the page +from the page cache. + ->launder_page() may be called prior to releasing a page if it is still found to be dirty. It returns zero if the page was successfully cleaned, or an error value if not. Note that in order to prevent the page diff --git a/Documentation/filesystems/configfs/configfs_example_explicit.c b/Documentation/filesystems/configfs/configfs_example_explicit.c index d428cc9f07f3..fd53869f5633 100644 --- a/Documentation/filesystems/configfs/configfs_example_explicit.c +++ b/Documentation/filesystems/configfs/configfs_example_explicit.c @@ -89,7 +89,7 @@ static ssize_t childless_storeme_write(struct childless *childless, char *p = (char *) page; tmp = simple_strtoul(p, &p, 10); - if (!p || (*p && (*p != '\n'))) + if ((*p != '\0') && (*p != '\n')) return -EINVAL; if (tmp > INT_MAX) diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index ed7e5efc06d8..20899e095e7e 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -534,6 +534,7 @@ struct address_space_operations { sector_t (*bmap)(struct address_space *, sector_t); int (*invalidatepage) (struct page *, unsigned long); int (*releasepage) (struct page *, int); + void (*freepage)(struct page *); ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov, loff_t offset, unsigned long nr_segs); struct page* (*get_xip_page)(struct address_space *, sector_t, @@ -660,11 +661,10 @@ struct address_space_operations { releasepage: releasepage is called on PagePrivate pages to indicate that the page should be freed if possible. ->releasepage should remove any private data from the page and clear the - PagePrivate flag. It may also remove the page from the - address_space. If this fails for some reason, it may indicate - failure with a 0 return value. - This is used in two distinct though related cases. The first - is when the VM finds a clean page with no active users and + PagePrivate flag. If releasepage() fails for some reason, it must + indicate failure with a 0 return value. + releasepage() is used in two distinct though related cases. The + first is when the VM finds a clean page with no active users and wants to make it a free page. If ->releasepage succeeds, the page will be removed from the address_space and become free. @@ -679,6 +679,12 @@ struct address_space_operations { need to ensure this. Possibly it can clear the PageUptodate bit if it cannot free private data yet. + freepage: freepage is called once the page is no longer visible in + the page cache in order to allow the cleanup of any private + data. Since it may be called by the memory reclaimer, it + should not assume that the original address_space mapping still + exists, and it should not block. + direct_IO: called by the generic read/write routines to perform direct_IO - that is IO requests which bypass the page cache and transfer data directly between the storage and the diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 9633da01ff46..792faa3c06cf 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -617,6 +617,16 @@ and have the following read/write attributes: is configured as an output, this value may be written; any nonzero value is treated as high. + If the pin can be configured as interrupt-generating interrupt + and if it has been configured to generate interrupts (see the + description of "edge"), you can poll(2) on that file and + poll(2) will return whenever the interrupt was triggered. If + you use poll(2), set the events POLLPRI and POLLERR. If you + use select(2), set the file descriptor in exceptfds. After + poll(2) returns, either lseek(2) to the beginning of the sysfs + file and read the new value or close the file and re-open it + to read the value. + "edge" ... reads as either "none", "rising", "falling", or "both". Write these strings to select the signal edge(s) that will make poll(2) on the "value" file return. diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93 index ac711f357faf..7a10616d0b44 100644 --- a/Documentation/hwmon/lm93 +++ b/Documentation/hwmon/lm93 @@ -11,7 +11,7 @@ Authors: Mark M. Hoffman Ported to 2.6 by Eric J. Bowersox Adapted to 2.6.20 by Carsten Emde - Modified for mainline integration by Hans J. Koch + Modified for mainline integration by Hans J. Koch Module Parameters ----------------- diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650 index 8be7beb9e3e8..c565650fcfc6 100644 --- a/Documentation/hwmon/max6650 +++ b/Documentation/hwmon/max6650 @@ -8,7 +8,7 @@ Supported chips: Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf Authors: - Hans J. Koch + Hans J. Koch John Morris Claus Gindhart diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 92e83e53148f..8b61c9360999 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2175,11 +2175,6 @@ and is between 256 and 4096 characters. It is defined in the file reset_devices [KNL] Force drivers to reset the underlying device during initialization. - resource_alloc_from_bottom - Allocate new resources from the beginning of available - space, not the end. If you need to use this, please - report a bug. - resume= [SWSUSP] Specify the partition device for software suspend @@ -2385,6 +2380,11 @@ and is between 256 and 4096 characters. It is defined in the file improve throughput, but will also increase the amount of memory reserved for use by the client. + swapaccount[=0|1] + [KNL] Enable accounting of swap in memory resource + controller if no parameter or 1 is given or disable + it if 0 is given (See Documentation/cgroups/memory.txt) + swiotlb= [IA-64] Number of I/O TLB slabs switches= [HW,M68k] diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index fe95105992c5..3c5e465296e1 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER Count buffering overhead as bytes/2^tcp_adv_win_scale (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. + Possible values are [-31, 31], inclusive. Default: 2 tcp_allowed_congestion_control - STRING diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 489e9bacd165..41cc7b30d7dd 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -379,8 +379,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: zero) bool pm_runtime_suspended(struct device *dev); - - return true if the device's runtime PM status is 'suspended', or false - otherwise + - return true if the device's runtime PM status is 'suspended' and its + 'power.disable_depth' field is equal to zero, or false otherwise void pm_runtime_allow(struct device *dev); - set the power.runtime_auto flag for the device and decrease its usage diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt deleted file mode 100644 index 114b595cfa97..000000000000 --- a/Documentation/sh/clk.txt +++ /dev/null @@ -1,32 +0,0 @@ -Clock framework on SuperH architecture - -The framework on SH extends existing API by the function clk_set_rate_ex, -which prototype is as follows: - - clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id) - -The algo_id parameter is used to specify algorithm used to recalculate clocks, -adjanced to clock, specified as first argument. It is assumed that algo_id==0 -means no changes to adjanced clock - -Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method, -if it is present in ops structure. The method should set the clock rate and adjust -all needed clocks according to the passed algo_id. -Exact values for algo_id are machine-dependent. For the sh7722, the following -values are defined: - - NO_CHANGE = 0, - IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */ - IUS_322, /* I:U:Sh = 3:2:2 */ - IUS_522, /* I:U:Sh = 5:2:2 */ - IUS_N11, /* I:U:Sh = N:1:1 */ - SB_N1, /* Sh:B = N:1 */ - SB3_N1, /* Sh:B3 = N:1 */ - SB3_32, /* Sh:B3 = 3:2 */ - SB3_43, /* Sh:B3 = 4:3 */ - SB3_54, /* Sh:B3 = 5:4 */ - BP_N1, /* B:P = N:1 */ - IP_N1 /* I:P = N:1 */ - -Each of these constants means relation between clocks that can be set via the FRQCR -register diff --git a/MAINTAINERS b/MAINTAINERS index 8e6548dbd5db..6a588873cf8d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -559,14 +559,14 @@ W: http://maxim.org.za/at91_26.html S: Maintained ARM/BCMRING ARM ARCHITECTURE -M: Leo Chen +M: Jiandong Zheng M: Scott Branden L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-bcmring ARM/BCMRING MTD NAND DRIVER -M: Leo Chen +M: Jiandong Zheng M: Scott Branden L: linux-mtd@lists.infradead.org S: Maintained @@ -815,7 +815,7 @@ F: drivers/mmc/host/msm_sdcc.c F: drivers/mmc/host/msm_sdcc.h F: drivers/serial/msm_serial.h F: drivers/serial/msm_serial.c -T: git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git +T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git S: Maintained ARM/TOSA MACHINE SUPPORT @@ -1359,7 +1359,7 @@ F: include/net/bluetooth/ BONDING DRIVER M: Jay Vosburgh -L: bonding-devel@lists.sourceforge.net +L: netdev@vger.kernel.org W: http://sourceforge.net/projects/bonding/ S: Supported F: drivers/net/bonding/ @@ -1829,6 +1829,13 @@ W: http://www.chelsio.com S: Supported F: drivers/net/cxgb4vf/ +STMMAC ETHERNET DRIVER +M: Giuseppe Cavallaro +L: netdev@vger.kernel.org +W: http://www.stlinux.com +S: Supported +F: drivers/net/stmmac/ + CYBERPRO FB DRIVER M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2008,6 +2015,7 @@ F: drivers/hwmon/dme1737.c DOCBOOK FOR DOCUMENTATION M: Randy Dunlap S: Maintained +F: scripts/kernel-doc DOCKING STATION DRIVER M: Shaohua Li @@ -2018,6 +2026,7 @@ F: drivers/acpi/dock.c DOCUMENTATION M: Randy Dunlap L: linux-doc@vger.kernel.org +T: quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/ S: Maintained F: Documentation/ @@ -2051,7 +2060,7 @@ F: Documentation/blockdev/drbd/ DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS M: Greg Kroah-Hartman -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git S: Supported F: Documentation/kobject.txt F: drivers/base/ @@ -2071,7 +2080,7 @@ F: include/drm/ INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets) M: Chris Wilson -L: intel-gfx@lists.freedesktop.org +L: intel-gfx@lists.freedesktop.org (subscribers-only) L: dri-devel@lists.freedesktop.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git S: Supported @@ -2435,10 +2444,12 @@ F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ +Q: http://patchwork.kernel.org/project/linux-fbdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git S: Orphan F: Documentation/fb/ -F: drivers/video/fb* +F: drivers/video/ +F: include/video/ F: include/linux/fb.h FREESCALE DMA DRIVER @@ -4053,9 +4064,8 @@ F: drivers/scsi/NCR_D700.* NETEFFECT IWARP RNIC DRIVER (IW_NES) M: Faisal Latif -M: Chien Tung L: linux-rdma@vger.kernel.org -W: http://www.neteffect.com +W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm S: Supported F: drivers/infiniband/hw/nes/ @@ -5828,6 +5838,8 @@ M: Chris Metcalf W: http://www.tilera.com/scm/ S: Supported F: arch/tile/ +F: drivers/char/hvc_tile.c +F: drivers/net/tile/ TLAN NETWORK DRIVER M: Samuel Chessman @@ -5920,7 +5932,6 @@ F: include/linux/tty.h TULIP NETWORK DRIVERS M: Grant Grundler -M: Kyle McMartin L: netdev@vger.kernel.org S: Maintained F: drivers/net/tulip/ @@ -6572,6 +6583,15 @@ F: include/linux/mfd/wm8400* F: include/sound/wm????.h F: sound/soc/codecs/wm* +WORKQUEUE +M: Tejun Heo +L: linux-kernel@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git +S: Maintained +F: include/linux/workqueue.h +F: kernel/workqueue.c +F: Documentation/workqueue.txt + X.25 NETWORK LAYER M: Andrew Hendry L: linux-x25@vger.kernel.org diff --git a/Makefile b/Makefile index ab5359db3d17..77044b7918a5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 37 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc7 NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db524e75c4a2..d56d21c0573b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB - select HAVE_KPROBES if (!XIP_KERNEL) + select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) @@ -1311,7 +1311,7 @@ config HZ config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" - depends on CPU_V7 && EXPERIMENTAL + depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED help @@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected" config FPE_NWFPE bool "NWFPE math emulation" - depends on !AEABI || OABI_COMPAT + depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL ---help--- Say Y to include the NWFPE floating point emulator in the kernel. This is necessary to run most binaries. Linux does not currently diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e2..4d26f2c52a75 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -70,12 +70,7 @@ else $(obj)/uImage: LOADADDR=$(ZRELADDR) endif -ifeq ($(CONFIG_THUMB2_KERNEL),y) -# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode -$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/") -else $(obj)/uImage: STARTADDR=$(LOADADDR) -endif $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 8b0de41c3dcb..78b508075161 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time .size _start, . - _start + .align + .type data,#object data: .word initrd_start @ source initrd address .word initrd_phys @ destination initrd address diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6825c34646d4..7193884ed8b0 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0 * sort out different calling conventions */ .align + .arm @ Always enter in ARM state start: .type start,#function - .rept 8 + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .rept 6 ) + ARM( .rept 8 ) mov r0, r0 .endr @@ -135,6 +139,7 @@ start: .word 0x016f2818 @ Magic numbers to help the loader .word start @ absolute load/run zImage address .word _edata @ zImage end address + THUMB( .thumb ) 1: mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer @@ -174,7 +179,8 @@ not_angel: ldr sp, [r0, #28] #ifdef CONFIG_AUTO_ZRELADDR @ determine final kernel image address - and r4, pc, #0xf8000000 + mov r4, pc + and r4, r4, #0xf8000000 add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size */ mov r1, #0x1e orr r1, r1, #3 << 10 - mov r2, pc, lsr #20 + mov r2, pc + mov r2, r2, lsr #20 orr r1, r1, r2, lsl #20 add r0, r3, r2, lsl #2 str r1, [r0], #4 @@ -1084,6 +1091,6 @@ memdump: mov r12, r0 reloc_end: .align - .section ".stack", "w" + .section ".stack", "aw", %nobits user_stack: .space 4096 user_stack_end: diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index d08168941bd6..366a924019ac 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -57,7 +57,7 @@ SECTIONS .bss : { *(.bss) } _end = .; - .stack (NOLOAD) : { *(.stack) } + .stack : { *(.stack) } .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 772f95f1aecd..e6388dcd8cfa 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) unsigned int shift = (irq % 4) * 8; unsigned int cpu = cpumask_first(mask_val); u32 val; + struct irq_desc *desc; spin_lock(&irq_controller_lock); - irq_desc[irq].node = cpu; + desc = irq_to_desc(irq); + if (desc == NULL) { + spin_unlock(&irq_controller_lock); + return -EINVAL; + } + desc->node = cpu; val = readl(reg) & ~(0xff << shift); val |= 1 << (cpu + shift); writel(val, reg); @@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start) { - unsigned int max_irq, i; + unsigned int gic_irqs, irq_limit, i; u32 cpumask = 1 << smp_processor_id(); if (gic_nr >= MAX_GIC_NR) @@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, /* * Find out how many interrupts are supported. - */ - max_irq = readl(base + GIC_DIST_CTR) & 0x1f; - max_irq = (max_irq + 1) * 32; - - /* * The GIC only supports up to 1020 interrupt sources. - * Limit this to either the architected maximum, or the - * platform maximum. */ - if (max_irq > max(1020, NR_IRQS)) - max_irq = max(1020, NR_IRQS); + gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; /* * Set all global interrupts to be level triggered, active low. */ - for (i = 32; i < max_irq; i += 16) + for (i = 32; i < gic_irqs; i += 16) writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); /* * Set all global interrupts to this CPU only. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* * Set priority on all global interrupts. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* * Disable all interrupts. Leave the PPI and SGIs alone * as these enables are banked registers. */ - for (i = 32; i < max_irq; i += 32) + for (i = 32; i < gic_irqs; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + /* + * Limit number of interrupts registered to the platform maximum + */ + irq_limit = gic_data[gic_nr].irq_offset + gic_irqs; + if (WARN_ON(irq_limit > NR_IRQS)) + irq_limit = NR_IRQS; + /* * Setup the Linux IRQ subsystem. */ - for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) { + for (i = irq_start; i < irq_limit; i++) { set_irq_chip(i, &gic_chip); set_irq_chip_data(i, &gic_data[gic_nr]); set_irq_handler(i, handle_level_irq); diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig new file mode 100644 index 000000000000..38cb7c985426 --- /dev/null +++ b/arch/arm/configs/at91rm9200_defconfig @@ -0,0 +1,341 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_MACH_ONEARM=y +CONFIG_ARCH_AT91RM9200DK=y +CONFIG_MACH_AT91RM9200EK=y +CONFIG_MACH_CSB337=y +CONFIG_MACH_CSB637=y +CONFIG_MACH_CARMEVA=y +CONFIG_MACH_ATEB9200=y +CONFIG_MACH_KB9200=y +CONFIG_MACH_PICOTUX2XX=y +CONFIG_MACH_KAFA=y +CONFIG_MACH_ECBAT91=y +CONFIG_MACH_YL9200=y +CONFIG_MACH_CPUAT91=y +CONFIG_MACH_ECO920=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 +# CONFIG_ARM_THUMB is not set +CONFIG_PCCARD=y +CONFIG_AT91_CF=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x10000000 +CONFIG_ZBOOT_ROM_BSS=0x20040000 +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_EEPROM_LEGACY=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_TUN=m +CONFIG_PHYLIB=y +CONFIG_DAVICOM_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=32 +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_BITBANG=y +CONFIG_GPIO_SYSFS=y +CONFIG_HWMON=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91RM9200_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_S1D13XXX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_DISPLAY_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_MCT_U232=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_REISERFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_SMB_FS=m +CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig deleted file mode 100644 index 4438e64f3bfb..000000000000 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_ECO920=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig deleted file mode 100644 index ccd517c64bc7..000000000000 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_AT91RM9200EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_S1D13XXX=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig deleted file mode 100644 index 1b0e9a1689bb..000000000000 --- a/arch/arm/configs/ateb9200_defconfig +++ /dev/null @@ -1,131 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_ATEB9200=y -CONFIG_PCCARD=m -CONFIG_AT91_CF=m -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_TUN=m -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_GADGET=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRC16=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig deleted file mode 100644 index ac64dbd8a49c..000000000000 --- a/arch/arm/configs/carmeva_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_HOTPLUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_CARMEVA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_DNOTIFY is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig deleted file mode 100644 index 022aeb55b676..000000000000 --- a/arch/arm/configs/cpuat91_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CPUAT91=y -CONFIG_AT91_TIMER_HZ=100 -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig deleted file mode 100644 index a24c448840c4..000000000000 --- a/arch/arm/configs/csb337_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB337=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc1" -# CONFIG_RTC_INTF_SYSFS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig deleted file mode 100644 index 98552adac5fb..000000000000 --- a/arch/arm/configs/csb637_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB637=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig deleted file mode 100644 index 6bb6abdcea8c..000000000000 --- a/arch/arm/configs/ecbat91_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ECBAT91=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_MAC80211=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig deleted file mode 100644 index 896dbe00dc6e..000000000000 --- a/arch/arm/configs/kafa_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KAFA=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig deleted file mode 100644 index 9f906a85f5c2..000000000000 --- a/arch/arm/configs/kb9202_defconfig +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KB9200=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x10000000 -CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig deleted file mode 100644 index 1579857aeeaa..000000000000 --- a/arch/arm/configs/onearm_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ONEARM=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig deleted file mode 100644 index 4c9afa478d57..000000000000 --- a/arch/arm/configs/picotux200_defconfig +++ /dev/null @@ -1,242 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_PICOTUX2XX=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=m -CONFIG_HID=m -CONFIG_USB=m -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_MMC=m -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=m -CONFIG_RTC_DRV_AT91RM9200=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_AMIGA_PARTITION=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig deleted file mode 100644 index 30c537f61089..000000000000 --- a/arch/arm/configs/yl9200_defconfig +++ /dev/null @@ -1,137 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_YL9200=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=3 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SLUB_DEBUG_ON=y -CONFIG_DEBUG_KOBJECT=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 062b58c029ab..749bb6622404 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -238,7 +238,7 @@ @ Slightly optimised to avoid incrementing the pointer twice usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort .if \rept == 2 - usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort + usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort .endif add\cond \ptr, #\rept * \inc diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 68870c776671..b4ffe9d5b526 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -13,6 +13,10 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID #define ASID(mm) ((mm)->context.id & 255) + +/* init_mm.context.id_lock should be initialized. */ +#define INIT_MM_CONTEXT(name) \ + .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock), #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index b155414192da..53d1d5deb111 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +/* we don't need complex calculations here as the pmd is folded into the pgd */ +#define pmd_addr_end(addr,end) (end) + /* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index c09e3573c5de..bb96a7d4bbf5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - ldr r7, =1f @ it's 20 bits + ldr r7, 1f @ it's 20 bits swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} 1: .word __ARM_NR_cmpxchg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index dd6b369ac69c..6bd82d25683c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -85,9 +85,11 @@ ENTRY(stext) mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_a @ yes, error 'a' bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -262,6 +264,7 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg + .align __enable_mmu_loc: .long . .long __enable_mmu @@ -282,6 +285,7 @@ ENTRY(secondary_startup) bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p /* @@ -308,6 +312,8 @@ ENTRY(__secondary_switched) b secondary_start_kernel ENDPROC(__secondary_switched) + .align + .type __secondary_data, %object __secondary_data: .long . @@ -413,6 +419,7 @@ __fixup_smp_on_up: mov pc, lr ENDPROC(__fixup_smp) + .align 1: .word . .word __smpalt_begin .word __smpalt_end diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index fd26f8d65151..9cf4cbf8f95b 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -59,6 +59,8 @@ relocate_new_kernel: ldr r2,kexec_boot_atags mov pc,lr + .align + .globl kexec_start_address kexec_start_address: .long 0x0 diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 1e4cbd4e7be9..64f6bc1a9132 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be) */ .L_found: #if __LINUX_ARM_ARCH__ >= 5 - rsb r1, r3, #0 - and r3, r3, r1 + rsb r0, r3, #0 + and r3, r3, r0 clz r3, r3 rsb r3, r3, #31 add r0, r2, r3 @@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be) addeq r2, r2, #1 mov r0, r2 #endif + cmp r1, r0 @ Clamp to maxbit + movlo r0, r1 mov pc, lr diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h index cff4e0a996ce..a6299e8321bd 100644 --- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 821eb842795f..d13add71f72a 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o @@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o -obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o +obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9338825cfcd7..7b539228e0ef 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins) static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91rm9200_dbgu_device; - at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 46bdc82d3fbf..8a3fc84847c1 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,24 +39,24 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata onearm_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ -}; - static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); - /* Setup the serial ports and console */ - at91_init_serial(&onearm_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init onearm_init_irq(void) diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c0ce79d431a0..d2e1f4ec1fcc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,17 +39,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata kafa_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init kafa_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -58,8 +47,14 @@ static void __init kafa_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Setup the serial ports and console */ - at91_init_serial(&kafa_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init kafa_init_irq(void) diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index bba5a560e02b..feb65787c30b 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -31,6 +31,7 @@ #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -38,11 +39,7 @@ static void __init pcontrol_g20_map_io(void) { - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */ - at91_register_uart(0, 0, 0); + stamp9g20_map_io(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void) /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */ at91_register_uart(AT91SAM9260_ID_US4, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } @@ -66,38 +60,6 @@ static void __init init_irq(void) } -/* - * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB - */ -static struct atmel_nand_data __initdata nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, -}; - -/* - * Bus timings; unit = 7.57ns - */ -static struct sam9_smc_config __initdata nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .ncs_read_setup = 16, .nrd_setup = 18, @@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .tdf_cycles = 1, } }; -static void __init add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &nand_smc_config); - at91_add_device_nand(&nand_data); -} - - static void __init add_device_pcontrol(void) { /* configure chip-select 4 (IO compatible to 8051 X4 ) */ @@ -155,23 +109,6 @@ static void __init add_device_pcontrol(void) } -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) -static struct mci_platform_data __initdata mmc_data = { - .slot[0] = { - .bus_width = 4, - }, -}; -#else -static struct at91_mmc_data __initdata mmc_data = { - .wire4 = 1, -}; -#endif - - /* * USB Host port */ @@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = { }; -/* - * Dallas 1-Wire DS2431 - */ -static struct w1_gpio_platform_data w1_gpio_pdata = { - .pin = AT91_PIN_PA29, - .is_open_drain = 1, -}; - -static struct platform_device w1_device = { - .name = "w1-gpio", - .id = -1, - .dev.platform_data = &w1_gpio_pdata, -}; - -static void add_wire1(void) -{ - at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); - at91_set_multi_drive(w1_gpio_pdata.pin, 1); - platform_device_register(&w1_device); -} - - static void __init pcontrol_g20_board_init(void) { - at91_add_device_serial(); - add_device_nand(); -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) - at91_add_device_mci(0, &mmc_data); -#else - at91_add_device_mmc(0, &mmc_data); -#endif + stamp9g20_board_init(); at91_add_device_usbh(&usbh_data); at91_add_device_eth(&macb_data); at91_add_device_i2c(pcontrol_g20_i2c_devices, ARRAY_SIZE(pcontrol_g20_i2c_devices)); - add_wire1(); add_device_pcontrol(); at91_add_device_spi(pcontrol_g20_spi_devices, ARRAY_SIZE(pcontrol_g20_spi_devices)); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 9d833bbc592d..55dad3a46547 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,24 +43,21 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata picotux200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init picotux200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); - /* Setup the serial ports and console */ - at91_init_serial(&picotux200_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init picotux200_init_irq(void) @@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, }; -// static struct at91_udc_data __initdata picotux200_udc_data = { -// .vbus_pin = AT91_PIN_PD4, -// .pullup_pin = AT91_PIN_PD5, -// }; - static struct at91_mmc_data __initdata picotux200_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, @@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .wp_pin = AT91_PIN_PA17, }; -// static struct spi_board_info picotux200_spi_devices[] = { -// { /* DataFlash chip */ -// .modalias = "mtd_dataflash", -// .chip_select = 0, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -// { /* DataFlash card */ -// .modalias = "mtd_dataflash", -// .chip_select = 3, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #endif -// }; - #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 #define PICOTUX200_FLASH_SIZE SZ_4M @@ -135,21 +112,11 @@ static void __init picotux200_board_init(void) at91_add_device_eth(&picotux200_eth_data); /* USB Host */ at91_add_device_usbh(&picotux200_usbh_data); - /* USB Device */ - // at91_add_device_udc(&picotux200_udc_data); - // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ at91_add_device_i2c(NULL, 0); - /* SPI */ - // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &picotux200_mmc_data); -#endif /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c similarity index 98% rename from arch/arm/mach-at91/board-dk.c rename to arch/arm/mach-at91/board-rm9200dk.c index e14f0e165680..4c1047c8200d 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-dk.c + * linux/arch/arm/mach-at91/board-rm9200dk.c * * Copyright (C) 2005 SAN People * @@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = { // .vcc_pin = ... always powered }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, }; +#endif static struct spi_board_info dk_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c similarity index 98% rename from arch/arm/mach-at91/board-ek.c rename to arch/arm/mach-at91/board-rm9200ek.c index 56e92c4bbc2a..9df1be8818c0 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-ek.c + * linux/arch/arm/mach-at91/board-rm9200ek.c * * Copyright (C) 2005 SAN People * @@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = AT91_PIN_PD5, }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; +#endif static struct spi_board_info ek_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 5206eef4a67e..f8902b118960 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -static void __init portuxg20_map_io(void) +void __init stamp9g20_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void) /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init stamp9g20evb_map_io(void) +{ + stamp9g20_map_io(); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); +} + +static void __init portuxg20_map_io(void) +{ + stamp9g20_map_io(); + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR @@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void) /* USART5 on ttyS6. (Rx, Tx only) */ at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init stamp9g20_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static void __init init_irq(void) @@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = { .pullup_pin = 0, /* pull-up driven by UDC */ }; -static struct at91_udc_data __initdata stamp9g20_udc_data = { +static struct at91_udc_data __initdata stamp9g20evb_udc_data = { .vbus_pin = AT91_PIN_PA22, .pullup_pin = 0, /* pull-up driven by UDC */ }; @@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = { } }; -static struct gpio_led stamp9g20_leds[] = { +static struct gpio_led stamp9g20evb_leds[] = { { .name = "D8", .gpio = AT91_PIN_PB18, @@ -250,7 +248,7 @@ void add_w1(void) } -static void __init generic_board_init(void) +void __init stamp9g20_board_init(void) { /* Serial */ at91_add_device_serial(); @@ -262,34 +260,40 @@ static void __init generic_board_init(void) #else at91_add_device_mmc(0, &mmc_data); #endif - /* USB Host */ - at91_add_device_usbh(&usbh_data); - /* Ethernet */ - at91_add_device_eth(&macb_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); /* W1 */ add_w1(); } static void __init portuxg20_board_init(void) { - generic_board_init(); - /* SPI */ - at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); + stamp9g20_board_init(); + /* USB Host */ + at91_add_device_usbh(&usbh_data); /* USB Device */ at91_add_device_udc(&portuxg20_udc_data); + /* Ethernet */ + at91_add_device_eth(&macb_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* SPI */ + at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); /* LEDs */ at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds)); } -static void __init stamp9g20_board_init(void) +static void __init stamp9g20evb_board_init(void) { - generic_board_init(); + stamp9g20_board_init(); + /* USB Host */ + at91_add_device_usbh(&usbh_data); /* USB Device */ - at91_add_device_udc(&stamp9g20_udc_data); + at91_add_device_udc(&stamp9g20evb_udc_data); + /* Ethernet */ + at91_add_device_eth(&macb_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); /* LEDs */ - at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds)); + at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds)); } MACHINE_START(PORTUXG20, "taskit PortuxG20") @@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20_map_io, + .map_io = stamp9g20evb_map_io, .init_irq = init_irq, - .init_machine = stamp9g20_board_init, + .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 89df00a9d2f7..e0f0080eb639 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = { * EPSON S1D13806 FB (discontinued chip) * EPSON S1D13506 FB */ -#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include