diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 99eb09007e73..05a79cbb1ca8 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -470,9 +470,8 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp); if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) { - ret_val = -E1000_ERR_PHY; e1000_release_phy_80003es2lan(hw); - return ret_val; + return -E1000_ERR_PHY; } udelay(200); @@ -804,9 +803,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ew32(IMC, 0xffffffff); er32(ICR); - ret_val = e1000_check_alt_mac_addr_generic(hw); - - return ret_val; + return e1000_check_alt_mac_addr_generic(hw); } /** @@ -1265,9 +1262,8 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw) } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY)); reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; - ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); - return ret_val; + return e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); } /** diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 795c3d640615..024ac243e23f 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1497,9 +1497,7 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1000e_setup_copper_link(hw); - - return ret_val; + return e1000e_setup_copper_link(hw); } /** diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 83f93684dc2f..ce8a55a584be 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -458,10 +458,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) * If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. */ - if (!mac->autoneg) { - ret_val = -E1000_ERR_CONFIG; - return ret_val; - } + if (!mac->autoneg) + return -E1000_ERR_CONFIG; /* * Auto-Neg is enabled. Auto Speed Detection takes care diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 70e8eb6d49d8..323cb145f849 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1064,8 +1064,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) break; default: e_dbg("Flow control param set incorrectly\n"); - ret_val = -E1000_ERR_CONFIG; - return ret_val; + return -E1000_ERR_CONFIG; } ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);