staging: rtl8188eu: remove unused defines from wifi.h

All defined P2P* in wifi.h are unused in the driver code,
so remove them.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Michael Straube 2019-03-18 11:23:59 +01:00 committed by Greg Kroah-Hartman
parent 758904ad61
commit 7f2c439642
1 changed files with 0 additions and 110 deletions

View File

@ -667,116 +667,6 @@ enum ht_cap_ampdu_factor {
#define WPS_ASSOC_STATE_ASSOCIATION_FAILURE 0x03
#define WPS_ASSOC_STATE_IP_FAILURE 0x04
/* =====================P2P Section===================== */
/* For P2P */
#define P2POUI 0x506F9A09
/* P2P Attribute ID */
#define P2P_ATTR_STATUS 0x00
#define P2P_ATTR_MINOR_REASON_CODE 0x01
#define P2P_ATTR_CAPABILITY 0x02
#define P2P_ATTR_DEVICE_ID 0x03
#define P2P_ATTR_GO_INTENT 0x04
#define P2P_ATTR_CONF_TIMEOUT 0x05
#define P2P_ATTR_LISTEN_CH 0x06
#define P2P_ATTR_GROUP_BSSID 0x07
#define P2P_ATTR_EX_LISTEN_TIMING 0x08
#define P2P_ATTR_INTENTED_IF_ADDR 0x09
#define P2P_ATTR_MANAGEABILITY 0x0A
#define P2P_ATTR_CH_LIST 0x0B
#define P2P_ATTR_NOA 0x0C
#define P2P_ATTR_DEVICE_INFO 0x0D
#define P2P_ATTR_GROUP_INFO 0x0E
#define P2P_ATTR_GROUP_ID 0x0F
#define P2P_ATTR_INTERFACE 0x10
#define P2P_ATTR_OPERATING_CH 0x11
#define P2P_ATTR_INVITATION_FLAGS 0x12
/* Value of Status Attribute */
#define P2P_STATUS_SUCCESS 0x00
#define P2P_STATUS_FAIL_INFO_UNAVAILABLE 0x01
#define P2P_STATUS_FAIL_INCOMPATIBLE_PARAM 0x02
#define P2P_STATUS_FAIL_LIMIT_REACHED 0x03
#define P2P_STATUS_FAIL_INVALID_PARAM 0x04
#define P2P_STATUS_FAIL_REQUEST_UNABLE 0x05
#define P2P_STATUS_FAIL_PREVOUS_PROTO_ERR 0x06
#define P2P_STATUS_FAIL_NO_COMMON_CH 0x07
#define P2P_STATUS_FAIL_UNKNOWN_P2PGROUP 0x08
#define P2P_STATUS_FAIL_BOTH_GOINTENT_15 0x09
#define P2P_STATUS_FAIL_INCOMPATIBLE_PROVSION 0x0A
#define P2P_STATUS_FAIL_USER_REJECT 0x0B
/* Value of Invitation Flags Attribute */
/* Value of Device Capability Bitmap */
#define P2P_DEVCAP_SERVICE_DISCOVERY BIT(0)
#define P2P_DEVCAP_CLIENT_DISCOVERABILITY BIT(1)
#define P2P_DEVCAP_CONCURRENT_OPERATION BIT(2)
#define P2P_DEVCAP_INFRA_MANAGED BIT(3)
#define P2P_DEVCAP_DEVICE_LIMIT BIT(4)
#define P2P_DEVCAP_INVITATION_PROC BIT(5)
/* Value of Group Capability Bitmap */
#define P2P_GRPCAP_GO BIT(0)
#define P2P_GRPCAP_PERSISTENT_GROUP BIT(1)
#define P2P_GRPCAP_GROUP_LIMIT BIT(2)
#define P2P_GRPCAP_INTRABSS BIT(3)
#define P2P_GRPCAP_CROSS_CONN BIT(4)
#define P2P_GRPCAP_PERSISTENT_RECONN BIT(5)
#define P2P_GRPCAP_GROUP_FORMATION BIT(6)
/* P2P Public Action Frame (Management Frame) */
#define P2P_PUB_ACTION_ACTION 0x09
/* P2P Public Action Frame Type */
#define P2P_GO_NEGO_REQ 0
#define P2P_GO_NEGO_RESP 1
#define P2P_GO_NEGO_CONF 2
#define P2P_INVIT_REQ 3
#define P2P_INVIT_RESP 4
#define P2P_DEVDISC_REQ 5
#define P2P_DEVDISC_RESP 6
#define P2P_PROVISION_DISC_REQ 7
#define P2P_PROVISION_DISC_RESP 8
/* P2P Action Frame Type */
#define P2P_NOTICE_OF_ABSENCE 0
#define P2P_PRESENCE_REQUEST 1
#define P2P_PRESENCE_RESPONSE 2
#define P2P_GO_DISC_REQUEST 3
#define P2P_PROVISIONING_SCAN_CNT 3
/* default value, used when: (1)p2p disabled or (2)p2p enabled
* but only do 1 scan phase
*/
#define P2P_FINDPHASE_EX_NONE 0
/* used when p2p enabled and want to do 1 scan phase and
* P2P_FINDPHASE_EX_MAX-1 find phase
*/
#define P2P_FINDPHASE_EX_FULL 1
#define P2P_FINDPHASE_EX_SOCIAL_FIRST (P2P_FINDPHASE_EX_FULL+1)
#define P2P_FINDPHASE_EX_MAX 4
#define P2P_FINDPHASE_EX_SOCIAL_LAST P2P_FINDPHASE_EX_MAX
/* 5 seconds timeout for sending the provision discovery request */
#define P2P_PROVISION_TIMEOUT 5000
/* 3 seconds timeout for sending the prov disc request concurrent mode */
#define P2P_CONCURRENT_PROVISION_TIME 3000
/* 5 seconds timeout for receiving the group negotiation response */
#define P2P_GO_NEGO_TIMEOUT 5000
/* 3 seconds timeout for sending the negotiation request under concurrent mode */
#define P2P_CONCURRENT_GO_NEGO_TIME 3000
/* 100ms */
#define P2P_TX_PRESCAN_TIMEOUT 100
/* 5 seconds timeout for sending the invitation request */
#define P2P_INVITE_TIMEOUT 5000
/* 3 seconds timeout for sending the invitation request under concurrent mode */
#define P2P_CONCURRENT_INVITE_TIME 3000
/* 25 seconds timeout to reset the scan channel (based on channel plan) */
#define P2P_RESET_SCAN_CH 25000
#define P2P_MAX_INTENT 15
/* WPS Configuration Method */
#define WPS_CM_NONE 0x0000
#define WPS_CM_LABEL 0x0004