[PATCH] Typo fixes

Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Alexey Dobriyan 2006-03-28 01:56:53 -08:00 committed by Linus Torvalds
parent ded23ac627
commit 7f927fcc2f
30 changed files with 39 additions and 39 deletions

View File

@ -29,7 +29,7 @@ address is written to $4a, then the whole Byte is written to
$48, while it doesn't matter how often you're writing to $4a $48, while it doesn't matter how often you're writing to $4a
as long as $48 is not touched. After $48 has been written, as long as $48 is not touched. After $48 has been written,
the whole card disappears from $e8 and is mapped to the new the whole card disappears from $e8 and is mapped to the new
address just written. Make shure $4a is written before $48, address just written. Make sure $4a is written before $48,
otherwise your chance is only 1:16 to find the board :-). otherwise your chance is only 1:16 to find the board :-).
The local memory-map is even active when mapped to $e8: The local memory-map is even active when mapped to $e8:

View File

@ -87,7 +87,7 @@
* would fail and generate an error message in the system log. * would fail and generate an error message in the system log.
* - For opt_c: slave should not be set to the master's setting * - For opt_c: slave should not be set to the master's setting
* while it is running. It was already set during enslave. To * while it is running. It was already set during enslave. To
* simplify things, it is now handeled separately. * simplify things, it is now handled separately.
* *
* - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> * - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
* - Code cleanup and style changes * - Code cleanup and style changes

View File

@ -236,7 +236,7 @@
/* /*
* Abort preanble and completion macros. * Abort preamble and completion macros.
* If a fixup handler is required then those macros must surround it. * If a fixup handler is required then those macros must surround it.
* It is assumed that the fixup code will handle the private part of * It is assumed that the fixup code will handle the private part of
* the exit macro. * the exit macro.

View File

@ -118,7 +118,7 @@
// enable CTS interrupt // enable CTS interrupt
#define MOXA_MUST_IER_ECTSI 0x80 #define MOXA_MUST_IER_ECTSI 0x80
// eanble RTS interrupt // enable RTS interrupt
#define MOXA_MUST_IER_ERTSI 0x40 #define MOXA_MUST_IER_ERTSI 0x40
// enable Xon/Xoff interrupt // enable Xon/Xoff interrupt
#define MOXA_MUST_IER_XINT 0x20 #define MOXA_MUST_IER_XINT 0x20

View File

@ -5996,7 +5996,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
* <15..8> ? RxFIFO IRQ Request Level * <15..8> ? RxFIFO IRQ Request Level
* *
* Note: For async mode the receive FIFO level must be set * Note: For async mode the receive FIFO level must be set
* to 0 to aviod the situation where the FIFO contains fewer bytes * to 0 to avoid the situation where the FIFO contains fewer bytes
* than the trigger level and no more data is expected. * than the trigger level and no more data is expected.
* *
* <7> 0 Exited Hunt IA (Interrupt Arm) * <7> 0 Exited Hunt IA (Interrupt Arm)

View File

@ -2044,7 +2044,7 @@ static int __init edac_mc_init(void)
*/ */
clear_pci_parity_errors(); clear_pci_parity_errors();
/* Create the MC sysfs entires */ /* Create the MC sysfs entries */
if (edac_sysfs_memctrl_setup()) { if (edac_sysfs_memctrl_setup()) {
edac_printk(KERN_ERR, EDAC_MC, edac_printk(KERN_ERR, EDAC_MC,
"Error initializing sysfs code\n"); "Error initializing sysfs code\n");

View File

@ -812,7 +812,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
int cfg_base = info->cfg_base; int cfg_base = info->cfg_base;
int enabled; int enabled;
/* User is shure about his config... accept it. */ /* User is sure about his config... accept it. */
IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): " IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
"io=0x%04x, irq=%d, dma=%d\n", "io=0x%04x, irq=%d, dma=%d\n",
__FUNCTION__, info->fir_base, info->irq, info->dma); __FUNCTION__, info->fir_base, info->irq, info->dma);

View File

@ -2283,7 +2283,7 @@ static void set_rx_mode(struct net_device *net_dev)
int i, table_entries; int i, table_entries;
u32 rx_mode; u32 rx_mode;
/* 635 Hash Table entires = 256(2^16) */ /* 635 Hash Table entries = 256(2^16) */
if((sis_priv->chipset_rev >= SIS635A_900_REV) || if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
(sis_priv->chipset_rev == SIS900B_900_REV)) (sis_priv->chipset_rev == SIS900B_900_REV))
table_entries = 16; table_entries = 16;

View File

@ -513,7 +513,7 @@ struct mii_phy {
u_char *rst; /* Start of reset sequence in SROM */ u_char *rst; /* Start of reset sequence in SROM */
u_int mc; /* Media Capabilities */ u_int mc; /* Media Capabilities */
u_int ana; /* NWay Advertisement */ u_int ana; /* NWay Advertisement */
u_int fdx; /* Full DupleX capabilites for each media */ u_int fdx; /* Full DupleX capabilities for each media */
u_int ttm; /* Transmit Threshold Mode for each media */ u_int ttm; /* Transmit Threshold Mode for each media */
u_int mci; /* 21142 MII Connector Interrupt info */ u_int mci; /* 21142 MII Connector Interrupt info */
}; };

View File

@ -199,7 +199,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
/* negotiation ended successfully */ /* negotiation ended successfully */
/* get the link partners reply and mask out all but /* get the link partners reply and mask out all but
* bits 24-21 which show the partners capabilites * bits 24-21 which show the partners capabilities
* and match those to what we advertised * and match those to what we advertised
* *
* then begin to interpret the results of the negotiation. * then begin to interpret the results of the negotiation.

View File

@ -208,7 +208,7 @@ static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
}; };
/* Notes on the new subsystem numbering scheme: /* Notes on the new subsystem numbering scheme:
* bits 0-1 indicate crypto capabilites: (0) variable, (1) DES, or (2) 3DES * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
* bit 4 indicates if this card has secured firmware (we don't support it) * bit 4 indicates if this card has secured firmware (we don't support it)
* bit 8 indicates if this is a (0) copper or (1) fiber card * bit 8 indicates if this is a (0) copper or (1) fiber card
* bits 12-16 indicate card type: (0) client and (1) server * bits 12-16 indicate card type: (0) client and (1) server
@ -788,7 +788,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
/* we have two rings to choose from, but we only use txLo for now /* we have two rings to choose from, but we only use txLo for now
* If we start using the Hi ring as well, we'll need to update * If we start using the Hi ring as well, we'll need to update
* typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(), * typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
* and TXHI_ENTIRES to match, as well as update the TSO code below * and TXHI_ENTRIES to match, as well as update the TSO code below
* to get the right DMA address * to get the right DMA address
*/ */
txRing = &tp->txLoRing; txRing = &tp->txLoRing;

View File

@ -3858,7 +3858,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev,
unsigned long flags; unsigned long flags;
/* Note : you may have realised that, as this is a SET operation, /* Note : you may have realised that, as this is a SET operation,
* this is priviledged and therefore a normal user can't * this is privileged and therefore a normal user can't
* perform scanning. * perform scanning.
* This is not an error, while the device perform scanning, * This is not an error, while the device perform scanning,
* traffic doesn't flow, so it's a perfect DoS... * traffic doesn't flow, so it's a perfect DoS...

View File

@ -747,7 +747,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
if (essid->length) { if (essid->length) {
dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */ dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
/* if it is to big, trunk it */ /* if it is too big, trunk it */
dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length); dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
} else { } else {
dwrq->flags = 0; dwrq->flags = 0;

View File

@ -1026,7 +1026,7 @@ static void twa_free_request_id(TW_Device_Extension *tw_dev, int request_id)
tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
} /* End twa_free_request_id() */ } /* End twa_free_request_id() */
/* This function will get parameter table entires from the firmware */ /* This function will get parameter table entries from the firmware */
static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes) static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
{ {
TW_Command_Full *full_command_packet; TW_Command_Full *full_command_packet;

View File

@ -1528,7 +1528,7 @@ static int serial8250_startup(struct uart_port *port)
/* /*
* Clear the FIFO buffers and disable them. * Clear the FIFO buffers and disable them.
* (they will be reeanbled in set_termios()) * (they will be reenabled in set_termios())
*/ */
serial8250_clear_fifos(up); serial8250_clear_fifos(up);

View File

@ -483,7 +483,7 @@ static int serial_txx9_startup(struct uart_port *port)
/* /*
* Clear the FIFO buffers and disable them. * Clear the FIFO buffers and disable them.
* (they will be reeanbled in set_termios()) * (they will be reenabled in set_termios())
*/ */
sio_set(up, TXX9_SIFCR, sio_set(up, TXX9_SIFCR,
TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);

View File

@ -641,7 +641,7 @@ static int sunsu_startup(struct uart_port *port)
/* /*
* Clear the FIFO buffers and disable them. * Clear the FIFO buffers and disable them.
* (they will be reeanbled in set_termios()) * (they will be reenabled in set_termios())
*/ */
if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);

View File

@ -158,7 +158,7 @@ static int ohci_s3c2410_hub_control (
"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
hcd, typeReq, wValue, wIndex, buf, wLength); hcd, typeReq, wValue, wIndex, buf, wLength);
/* if we are only an humble host without any special capabilites /* if we are only an humble host without any special capabilities
* process the request straight away and exit */ * process the request straight away and exit */
if (info == NULL) { if (info == NULL) {

View File

@ -217,7 +217,7 @@ static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
* with devices that use it and those that don't. * with devices that use it and those that don't.
*/ */
if ((detail->bDetailData[1] & ~0x02) != 0x01) { if ((detail->bDetailData[1] & ~0x02) != 0x01) {
/* bmDataCapabilites == 0 would be fine too, /* bmDataCapabilities == 0 would be fine too,
* but framing is minidriver-coupled for now. * but framing is minidriver-coupled for now.
*/ */
bad_detail: bad_detail:

View File

@ -311,7 +311,7 @@ mb_cache_create(const char *name, struct mb_cache_op *cache_op,
/* /*
* mb_cache_shrink() * mb_cache_shrink()
* *
* Removes all cache entires of a device from the cache. All cache entries * Removes all cache entries of a device from the cache. All cache entries
* currently in use cannot be freed, and thus remain in the cache. All others * currently in use cannot be freed, and thus remain in the cache. All others
* are freed. * are freed.
* *

View File

@ -333,7 +333,7 @@ struct pdc_model { /* for PDC_MODEL */
unsigned long curr_key; unsigned long curr_key;
}; };
/* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */ /* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
#define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */ #define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */
#define PDC_MODEL_NVA_MASK (3 << 4) #define PDC_MODEL_NVA_MASK (3 << 4)

View File

@ -13,7 +13,7 @@
#include <asm/cpu/addrspace.h> #include <asm/cpu/addrspace.h>
/* Memory segments (32bit Priviledged mode addresses) */ /* Memory segments (32bit Privileged mode addresses) */
#define P0SEG 0x00000000 #define P0SEG 0x00000000
#define P1SEG 0x80000000 #define P1SEG 0x80000000
#define P2SEG 0xa0000000 #define P2SEG 0xa0000000

View File

@ -738,7 +738,7 @@ static unsigned long __init sun_floppy_init(void)
if (!sun_floppy_types[0] && sun_floppy_types[1]) { if (!sun_floppy_types[0] && sun_floppy_types[1]) {
/* /*
* Set the drive exchange bit in FCR on NS87303, * Set the drive exchange bit in FCR on NS87303,
* make shure other bits are sane before doing so. * make sure other bits are sane before doing so.
*/ */
ns87303_modify(config, FER, FER_EDM, 0); ns87303_modify(config, FER, FER_EDM, 0);
ns87303_modify(config, ASC, ASC_DRV2_SEL, 0); ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);

View File

@ -734,7 +734,7 @@ struct fb_tile_ops {
/* A driver may set this flag to indicate that it does want a set_par to be /* A driver may set this flag to indicate that it does want a set_par to be
* called every time when fbcon_switch is executed. The advantage is that with * called every time when fbcon_switch is executed. The advantage is that with
* this flag set you can really be shure that set_par is always called before * this flag set you can really be sure that set_par is always called before
* any of the functions dependant on the correct hardware state or altering * any of the functions dependant on the correct hardware state or altering
* that state, even if you are using some broken X releases. The disadvantage * that state, even if you are using some broken X releases. The disadvantage
* is that it introduces unwanted delays to every console switch if set_par * is that it introduces unwanted delays to every console switch if set_par

View File

@ -912,7 +912,7 @@ asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
/* /*
* Check if this process has the right to modify the specified * Check if this process has the right to modify the specified
* process. The right exists if the process has administrative * process. The right exists if the process has administrative
* capabilities, superuser priviledges or the same * capabilities, superuser privileges or the same
* userid as the target process. * userid as the target process.
*/ */
if ((current->euid != task->suid) && (current->euid != task->uid) && if ((current->euid != task->suid) && (current->euid != task->uid) &&

View File

@ -1302,7 +1302,7 @@ static int irda_sendmsg(struct kiocb *iocb, struct socket *sock,
if (sk->sk_state != TCP_ESTABLISHED) if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN; return -ENOTCONN;
/* Check that we don't send out to big frames */ /* Check that we don't send out too big frames */
if (len > self->max_data_size) { if (len > self->max_data_size) {
IRDA_DEBUG(2, "%s(), Chopping frame from %zd to %d bytes!\n", IRDA_DEBUG(2, "%s(), Chopping frame from %zd to %d bytes!\n",
__FUNCTION__, len, self->max_data_size); __FUNCTION__, len, self->max_data_size);
@ -1546,7 +1546,7 @@ static int irda_sendmsg_dgram(struct kiocb *iocb, struct socket *sock,
IRDA_ASSERT(self != NULL, return -1;); IRDA_ASSERT(self != NULL, return -1;);
/* /*
* Check that we don't send out to big frames. This is an unreliable * Check that we don't send out too big frames. This is an unreliable
* service, so we have no fragmentation and no coalescence * service, so we have no fragmentation and no coalescence
*/ */
if (len > self->max_data_size) { if (len > self->max_data_size) {
@ -1642,7 +1642,7 @@ static int irda_sendmsg_ultra(struct kiocb *iocb, struct socket *sock,
} }
/* /*
* Check that we don't send out to big frames. This is an unreliable * Check that we don't send out too big frames. This is an unreliable
* service, so we have no fragmentation and no coalescence * service, so we have no fragmentation and no coalescence
*/ */
if (len > self->max_data_size) { if (len > self->max_data_size) {

View File

@ -313,7 +313,7 @@ static int snd_rme32_capture_copy(struct snd_pcm_substream *substream, int chann
} }
/* /*
* SPDIF I/O capabilites (half-duplex mode) * SPDIF I/O capabilities (half-duplex mode)
*/ */
static struct snd_pcm_hardware snd_rme32_spdif_info = { static struct snd_pcm_hardware snd_rme32_spdif_info = {
.info = (SNDRV_PCM_INFO_MMAP_IOMEM | .info = (SNDRV_PCM_INFO_MMAP_IOMEM |
@ -339,7 +339,7 @@ static struct snd_pcm_hardware snd_rme32_spdif_info = {
}; };
/* /*
* ADAT I/O capabilites (half-duplex mode) * ADAT I/O capabilities (half-duplex mode)
*/ */
static struct snd_pcm_hardware snd_rme32_adat_info = static struct snd_pcm_hardware snd_rme32_adat_info =
{ {
@ -364,7 +364,7 @@ static struct snd_pcm_hardware snd_rme32_adat_info =
}; };
/* /*
* SPDIF I/O capabilites (full-duplex mode) * SPDIF I/O capabilities (full-duplex mode)
*/ */
static struct snd_pcm_hardware snd_rme32_spdif_fd_info = { static struct snd_pcm_hardware snd_rme32_spdif_fd_info = {
.info = (SNDRV_PCM_INFO_MMAP | .info = (SNDRV_PCM_INFO_MMAP |
@ -390,7 +390,7 @@ static struct snd_pcm_hardware snd_rme32_spdif_fd_info = {
}; };
/* /*
* ADAT I/O capabilites (full-duplex mode) * ADAT I/O capabilities (full-duplex mode)
*/ */
static struct snd_pcm_hardware snd_rme32_adat_fd_info = static struct snd_pcm_hardware snd_rme32_adat_fd_info =
{ {

View File

@ -359,7 +359,7 @@ snd_rme96_capture_copy(struct snd_pcm_substream *substream,
} }
/* /*
* Digital output capabilites (S/PDIF) * Digital output capabilities (S/PDIF)
*/ */
static struct snd_pcm_hardware snd_rme96_playback_spdif_info = static struct snd_pcm_hardware snd_rme96_playback_spdif_info =
{ {
@ -388,7 +388,7 @@ static struct snd_pcm_hardware snd_rme96_playback_spdif_info =
}; };
/* /*
* Digital input capabilites (S/PDIF) * Digital input capabilities (S/PDIF)
*/ */
static struct snd_pcm_hardware snd_rme96_capture_spdif_info = static struct snd_pcm_hardware snd_rme96_capture_spdif_info =
{ {
@ -417,7 +417,7 @@ static struct snd_pcm_hardware snd_rme96_capture_spdif_info =
}; };
/* /*
* Digital output capabilites (ADAT) * Digital output capabilities (ADAT)
*/ */
static struct snd_pcm_hardware snd_rme96_playback_adat_info = static struct snd_pcm_hardware snd_rme96_playback_adat_info =
{ {
@ -442,7 +442,7 @@ static struct snd_pcm_hardware snd_rme96_playback_adat_info =
}; };
/* /*
* Digital input capabilites (ADAT) * Digital input capabilities (ADAT)
*/ */
static struct snd_pcm_hardware snd_rme96_capture_adat_info = static struct snd_pcm_hardware snd_rme96_capture_adat_info =
{ {

View File

@ -2256,7 +2256,7 @@ static int snd_hdspm_create_controls(struct snd_card *card, struct hdspm * hdspm
} }
/* Channel playback mixer as default control /* Channel playback mixer as default control
Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats to big for any alsamixer Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats too big for any alsamixer
they are accesible via special IOCTL on hwdep they are accesible via special IOCTL on hwdep
and the mixer 2dimensional mixer control */ and the mixer 2dimensional mixer control */

View File

@ -404,7 +404,7 @@ static void usX2Y_usbpcm_subs_startup(struct snd_usX2Y_substream *subs)
struct usX2Ydev * usX2Y = subs->usX2Y; struct usX2Ydev * usX2Y = subs->usX2Y;
usX2Y->prepare_subs = subs; usX2Y->prepare_subs = subs;
subs->urb[0]->start_frame = -1; subs->urb[0]->start_frame = -1;
smp_wmb(); // Make shure above modifications are seen by i_usX2Y_subs_startup() smp_wmb(); // Make sure above modifications are seen by i_usX2Y_subs_startup()
usX2Y_urbs_set_complete(usX2Y, i_usX2Y_usbpcm_subs_startup); usX2Y_urbs_set_complete(usX2Y, i_usX2Y_usbpcm_subs_startup);
} }