mirror of https://gitee.com/openkylin/linux.git
phy: samsung: Add support for the Exynos5420 variant of the USB2 PHY
Exynos5420 differs a bit from Exynos5250 in USB2 PHY related registers in the PMU region. Add a variant for the Exynos5420 case. Till now, USB2 PHY worked only because the bootloader enabled the PHY, but then driver messed USB 3.0 DRD related registers during the suspend/resume cycle. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201120085637.7299-2-m.szyprowski@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
parent
53e7c92c7f
commit
81b534f7e9
|
@ -47,6 +47,7 @@ Required properties:
|
|||
- "samsung,exynos4210-usb2-phy"
|
||||
- "samsung,exynos4x12-usb2-phy"
|
||||
- "samsung,exynos5250-usb2-phy"
|
||||
- "samsung,exynos5420-usb2-phy"
|
||||
- "samsung,s5pv210-usb2-phy"
|
||||
- reg : a list of registers used by phy driver
|
||||
- first and obligatory is the location of phy modules registers
|
||||
|
|
|
@ -64,7 +64,12 @@ config PHY_EXYNOS4X12_USB2
|
|||
config PHY_EXYNOS5250_USB2
|
||||
bool
|
||||
depends on PHY_SAMSUNG_USB2
|
||||
default SOC_EXYNOS5250 || SOC_EXYNOS5420
|
||||
default SOC_EXYNOS5250
|
||||
|
||||
config PHY_EXYNOS5420_USB2
|
||||
bool
|
||||
depends on PHY_SAMSUNG_USB2
|
||||
default SOC_EXYNOS5420
|
||||
|
||||
config PHY_S5PV210_USB2
|
||||
bool "Support for S5PV210"
|
||||
|
|
|
@ -117,9 +117,9 @@
|
|||
|
||||
/* Isolation, configured in the power management unit */
|
||||
#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704
|
||||
#define EXYNOS_5250_USB_ISOL_OTG BIT(0)
|
||||
#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708
|
||||
#define EXYNOS_5250_USB_ISOL_HOST BIT(0)
|
||||
#define EXYNOS_5420_USB_ISOL_HOST_OFFSET 0x70C
|
||||
#define EXYNOS_5250_USB_ISOL_ENABLE BIT(0)
|
||||
|
||||
/* Mode swtich register */
|
||||
#define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230
|
||||
|
@ -132,7 +132,6 @@ enum exynos4x12_phy_id {
|
|||
EXYNOS5250_HOST,
|
||||
EXYNOS5250_HSIC0,
|
||||
EXYNOS5250_HSIC1,
|
||||
EXYNOS5250_NUM_PHYS,
|
||||
};
|
||||
|
||||
/*
|
||||
|
@ -176,20 +175,19 @@ static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on)
|
|||
{
|
||||
struct samsung_usb2_phy_driver *drv = inst->drv;
|
||||
u32 offset;
|
||||
u32 mask;
|
||||
u32 mask = EXYNOS_5250_USB_ISOL_ENABLE;
|
||||
|
||||
switch (inst->cfg->id) {
|
||||
case EXYNOS5250_DEVICE:
|
||||
if (drv->cfg == &exynos5250_usb2_phy_config &&
|
||||
inst->cfg->id == EXYNOS5250_DEVICE)
|
||||
offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
|
||||
mask = EXYNOS_5250_USB_ISOL_OTG;
|
||||
break;
|
||||
case EXYNOS5250_HOST:
|
||||
else if (drv->cfg == &exynos5250_usb2_phy_config &&
|
||||
inst->cfg->id == EXYNOS5250_HOST)
|
||||
offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
|
||||
mask = EXYNOS_5250_USB_ISOL_HOST;
|
||||
break;
|
||||
default:
|
||||
else if (drv->cfg == &exynos5420_usb2_phy_config &&
|
||||
inst->cfg->id == EXYNOS5250_HOST)
|
||||
offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET;
|
||||
else
|
||||
return;
|
||||
}
|
||||
|
||||
regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
|
||||
}
|
||||
|
@ -390,9 +388,31 @@ static const struct samsung_usb2_common_phy exynos5250_phys[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static const struct samsung_usb2_common_phy exynos5420_phys[] = {
|
||||
{
|
||||
.label = "host",
|
||||
.id = EXYNOS5250_HOST,
|
||||
.power_on = exynos5250_power_on,
|
||||
.power_off = exynos5250_power_off,
|
||||
},
|
||||
{
|
||||
.label = "hsic",
|
||||
.id = EXYNOS5250_HSIC0,
|
||||
.power_on = exynos5250_power_on,
|
||||
.power_off = exynos5250_power_off,
|
||||
},
|
||||
};
|
||||
|
||||
const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = {
|
||||
.has_mode_switch = 1,
|
||||
.num_phys = EXYNOS5250_NUM_PHYS,
|
||||
.num_phys = ARRAY_SIZE(exynos5250_phys),
|
||||
.phys = exynos5250_phys,
|
||||
.rate_to_clk = exynos5250_rate_to_clk,
|
||||
};
|
||||
|
||||
const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = {
|
||||
.has_mode_switch = 1,
|
||||
.num_phys = ARRAY_SIZE(exynos5420_phys),
|
||||
.phys = exynos5420_phys,
|
||||
.rate_to_clk = exynos5250_rate_to_clk,
|
||||
};
|
||||
|
|
|
@ -128,6 +128,12 @@ static const struct of_device_id samsung_usb2_phy_of_match[] = {
|
|||
.data = &exynos5250_usb2_phy_config,
|
||||
},
|
||||
#endif
|
||||
#ifdef CONFIG_PHY_EXYNOS5420_USB2
|
||||
{
|
||||
.compatible = "samsung,exynos5420-usb2-phy",
|
||||
.data = &exynos5420_usb2_phy_config,
|
||||
},
|
||||
#endif
|
||||
#ifdef CONFIG_PHY_S5PV210_USB2
|
||||
{
|
||||
.compatible = "samsung,s5pv210-usb2-phy",
|
||||
|
|
|
@ -66,5 +66,6 @@ extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config;
|
|||
extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config;
|
||||
extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config;
|
||||
extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config;
|
||||
extern const struct samsung_usb2_phy_config exynos5420_usb2_phy_config;
|
||||
extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config;
|
||||
#endif
|
||||
|
|
Loading…
Reference in New Issue