ARM: davinci: dm646x: add new clock init using common clock framework

This adds the new board-specific clock init in mach-davinci/dm646x.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -776,6 +776,8 @@ static __init void evm_init(void)
 	int ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	dm646x_register_clocks();
+
 	ret = dm646x_gpio_register();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);

arch/arm/mach-davinci/davinci.h

@@ -116,6 +116,7 @@ int dm644x_gpio_register(void);
 /* DM646x function declarations */
 void dm646x_init(void);
 void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
+void dm646x_register_clocks(void);
 void dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void dm646x_init_mcasp1(struct snd_platform_data *pdata);
 int dm646x_init_edma(struct edma_rsv_info *rsv);

arch/arm/mach-davinci/dm646x.c

@@ -8,29 +8,35 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+
+#include <linux/clk-provider.h>
+#include <linux/clk/davinci.h>
+#include <linux/clkdev.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
 
 #include <asm/mach/map.h>
 
+#include <mach/common.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include "psc.h"
 #include <mach/mux.h>
-#include <mach/time.h>
 #include <mach/serial.h>
-#include <mach/common.h>
+#include <mach/time.h>
 
-#include "davinci.h"
-#include "clock.h"
-#include "mux.h"
 #include "asp.h"
+#include "davinci.h"
+#include "mux.h"
+
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
 
 #define DAVINCI_VPIF_BASE       (0x01C12000)
 
@@ -46,6 +52,7 @@
 #define DM646X_EMAC_CNTRL_RAM_OFFSET	0x2000
 #define DM646X_EMAC_CNTRL_RAM_SIZE	0x2000
 
+#ifndef CONFIG_COMMON_CLK
 static struct pll_data pll1_data = {
 	.num       = 1,
 	.phys_base = DAVINCI_PLL1_BASE,
@@ -356,6 +363,7 @@ static struct clk_lookup dm646x_clks[] = {
 	CLK(NULL, "vpif1", &vpif1_clk),
 	CLK(NULL, NULL, NULL),
 };
+#endif
 
 static struct emac_platform_data dm646x_emac_pdata = {
 	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
@@ -954,10 +962,49 @@ void __init dm646x_init(void)
 void __init dm646x_init_time(unsigned long ref_clk_rate,
 			     unsigned long aux_clkin_rate)
 {
+#ifdef CONFIG_COMMON_CLK
+	void __iomem *pll1, *psc;
+	struct clk *clk;
+
+	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
+	clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
+
+	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
+	dm646x_pll1_init(NULL, pll1, NULL);
+
+	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
+	dm646x_psc_init(NULL, psc);
+
+	clk = clk_get(NULL, "timer0");
+
+	davinci_timer_init(clk);
+#else
 	ref_clk.rate = ref_clk_rate;
 	aux_clkin.rate = aux_clkin_rate;
 	davinci_clk_init(dm646x_clks);
 	davinci_timer_init(&timer0_clk);
+#endif
+}
+
+static struct resource dm646x_pll2_resources[] = {
+	{
+		.start	= DAVINCI_PLL2_BASE,
+		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm646x_pll2_device = {
+	.name		= "dm646x-pll2",
+	.id		= -1,
+	.resource	= dm646x_pll2_resources,
+	.num_resources	= ARRAY_SIZE(dm646x_pll2_resources),
+};
+
+void __init dm646x_register_clocks(void)
+{
+	/* PLL1 and PSC are registered in dm646x_init_time() */
+	platform_device_register(&dm646x_pll2_device);
 }
 
 static int __init dm646x_init_devices(void)