diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index 3a80f3d1da1c..16a318fc469a 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -28,13 +28,46 @@ #include -enum fe_type { - FE_QPSK, - FE_QAM, - FE_OFDM, - FE_ATSC -}; - +/** + * enum fe_caps - Frontend capabilities + * + * @FE_IS_STUPID: There's something wrong at the + * frontend, and it can't report its + * capabilities. + * @FE_CAN_INVERSION_AUTO: Can auto-detect frequency spectral + * band inversion + * @FE_CAN_FEC_1_2: Supports FEC 1/2 + * @FE_CAN_FEC_2_3: Supports FEC 2/3 + * @FE_CAN_FEC_3_4: Supports FEC 3/4 + * @FE_CAN_FEC_4_5: Supports FEC 4/5 + * @FE_CAN_FEC_5_6: Supports FEC 5/6 + * @FE_CAN_FEC_6_7: Supports FEC 6/7 + * @FE_CAN_FEC_7_8: Supports FEC 7/8 + * @FE_CAN_FEC_8_9: Supports FEC 8/9 + * @FE_CAN_FEC_AUTO: Can auto-detect FEC + * @FE_CAN_QPSK: Supports QPSK modulation + * @FE_CAN_QAM_16: Supports 16-QAM modulation + * @FE_CAN_QAM_32: Supports 32-QAM modulation + * @FE_CAN_QAM_64: Supports 64-QAM modulation + * @FE_CAN_QAM_128: Supports 128-QAM modulation + * @FE_CAN_QAM_256: Supports 256-QAM modulation + * @FE_CAN_QAM_AUTO: Can auto-detect QAM modulation + * @FE_CAN_TRANSMISSION_MODE_AUTO: Can auto-detect transmission mode + * @FE_CAN_BANDWIDTH_AUTO: Can auto-detect bandwidth + * @FE_CAN_GUARD_INTERVAL_AUTO: Can auto-detect guard interval + * @FE_CAN_HIERARCHY_AUTO: Can auto-detect hierarchy + * @FE_CAN_8VSB: Supports 8-VSB modulation + * @FE_CAN_16VSB: Supporta 16-VSB modulation + * @FE_HAS_EXTENDED_CAPS: Unused + * @FE_CAN_MULTISTREAM: Supports multistream filtering + * @FE_CAN_TURBO_FEC: Supports "turbo FEC" modulation + * @FE_CAN_2G_MODULATION: Supports "2nd generation" modulation, + * e. g. DVB-S2, DVB-T2, DVB-C2 + * @FE_NEEDS_BENDING: Unused + * @FE_CAN_RECOVER: Can recover from a cable unplug + * automatically + * @FE_CAN_MUTE_TS: Can stop spurious TS data output + */ enum fe_caps { FE_IS_STUPID = 0, FE_CAN_INVERSION_AUTO = 0x1, @@ -60,15 +93,55 @@ enum fe_caps { FE_CAN_HIERARCHY_AUTO = 0x100000, FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, - FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */ - FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports multistream filtering */ - FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */ - FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */ - FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */ - FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */ - FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */ + FE_HAS_EXTENDED_CAPS = 0x800000, + FE_CAN_MULTISTREAM = 0x4000000, + FE_CAN_TURBO_FEC = 0x8000000, + FE_CAN_2G_MODULATION = 0x10000000, + FE_NEEDS_BENDING = 0x20000000, + FE_CAN_RECOVER = 0x40000000, + FE_CAN_MUTE_TS = 0x80000000 }; +/* + * DEPRECATED: Should be kept just due to backward compatibility. + */ +enum fe_type { + FE_QPSK, + FE_QAM, + FE_OFDM, + FE_ATSC +}; + +/** + * struct dvb_frontend_info - Frontend properties and capabilities + * + * @name: Name of the frontend + * @type: **DEPRECATED**. + * Should not be used on modern programs, + * as a frontend may have more than one type. + * In order to get the support types of a given + * frontend, use :c:type:`DTV_ENUM_DELSYS` + * instead. + * @frequency_min: Minimal frequency supported by the frontend. + * @frequency_max: Minimal frequency supported by the frontend. + * @frequency_stepsize: All frequencies are multiple of this value. + * @frequency_tolerance: Frequency tolerance. + * @symbol_rate_min: Minimal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_max: Maximal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_tolerance: Maximal symbol rate tolerance, in ppm + * (for Cable/Satellite systems). + * @notifier_delay: **DEPRECATED**. Not used by any driver. + * @caps: Capabilities supported by the frontend, + * as specified in &enum fe_caps. + * + * .. note: + * + * #. The frequencies are specified in Hz for Terrestrial and Cable + * systems. + * #. The frequencies are specified in kHz for Satellite systems. + */ struct dvb_frontend_info { char name[128]; enum fe_type type; /* DEPRECATED. Use DTV_ENUM_DELSYS instead */ @@ -78,53 +151,102 @@ struct dvb_frontend_info { __u32 frequency_tolerance; __u32 symbol_rate_min; __u32 symbol_rate_max; - __u32 symbol_rate_tolerance; /* ppm */ + __u32 symbol_rate_tolerance; __u32 notifier_delay; /* DEPRECATED */ enum fe_caps caps; }; - /** - * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for - * the meaning of this struct... + * struct dvb_diseqc_master_cmd - DiSEqC master command + * + * @msg: + * DiSEqC message to be sent. It contains a 3 bytes header with: + * framing + address + command, and an optional argument + * of up to 3 bytes of data. + * @msg_len: + * Length of the DiSEqC message. Valid values are 3 to 6. + * + * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for + * the possible messages that can be used. */ struct dvb_diseqc_master_cmd { - __u8 msg [6]; /* { framing, address, command, data [3] } */ - __u8 msg_len; /* valid values are 3...6 */ + __u8 msg[6]; + __u8 msg_len; }; +/** + * struct dvb_diseqc_slave_reply - DiSEqC received data + * + * @msg: + * DiSEqC message buffer to store a message received via DiSEqC. + * It contains one byte header with: framing and + * an optional argument of up to 3 bytes of data. + * @msg_len: + * Length of the DiSEqC message. Valid values are 0 to 4, + * where 0 means no message. + * @timeout: + * Return from ioctl after timeout ms with errorcode when + * no message was received. + * + * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for + * the possible messages that can be used. + */ struct dvb_diseqc_slave_reply { - __u8 msg [4]; /* { framing, data [3] } */ - __u8 msg_len; /* valid values are 0...4, 0 means no msg */ - int timeout; /* return from ioctl after timeout ms with */ -}; /* errorcode when no message was received */ + __u8 msg[4]; + __u8 msg_len; + int timeout; +}; +/** + * enum fe_sec_voltage - DC Voltage used to feed the LNBf + * + * @SEC_VOLTAGE_13: Output 13V to the LNBf + * @SEC_VOLTAGE_18: Output 18V to the LNBf + * @SEC_VOLTAGE_OFF: Don't feed the LNBf with a DC voltage + */ enum fe_sec_voltage { SEC_VOLTAGE_13, SEC_VOLTAGE_18, SEC_VOLTAGE_OFF }; +/** + * enum fe_sec_tone_mode - Type of tone to be send to the LNBf. + * @SEC_TONE_ON: Sends a 22kHz tone burst to the antenna. + * @SEC_TONE_OFF: Don't send a 22kHz tone to the antenna (except + * if the ``FE_DISEQC_*`` ioctls are called). + */ enum fe_sec_tone_mode { SEC_TONE_ON, SEC_TONE_OFF }; +/** + * enum fe_sec_mini_cmd - Type of mini burst to be sent + * + * @SEC_MINI_A: Sends a mini-DiSEqC 22kHz '0' Tone Burst to select + * satellite-A + * @SEC_MINI_B: Sends a mini-DiSEqC 22kHz '1' Data Burst to select + * satellite-B + */ enum fe_sec_mini_cmd { SEC_MINI_A, SEC_MINI_B }; /** - * enum fe_status - enumerates the possible frontend status - * @FE_HAS_SIGNAL: found something above the noise level - * @FE_HAS_CARRIER: found a DVB signal - * @FE_HAS_VITERBI: FEC is stable - * @FE_HAS_SYNC: found sync bytes - * @FE_HAS_LOCK: everything's working - * @FE_TIMEDOUT: no lock within the last ~2 seconds - * @FE_REINIT: frontend was reinitialized, application is recommended - * to reset DiSEqC, tone and parameters + * enum fe_status - Enumerates the possible frontend status. + * @FE_NONE: The frontend doesn't have any kind of lock. + * That's the initial frontend status + * @FE_HAS_SIGNAL: Has found something above the noise level. + * @FE_HAS_CARRIER: Has found a DVB signal. + * @FE_HAS_VITERBI: FEC inner coding (Viterbi, LDPC or other inner code). + * is stable. + * @FE_HAS_SYNC: Synchronization bytes was found. + * @FE_HAS_LOCK: DVB were locked and everything is working. + * @FE_TIMEDOUT: Fo lock within the last about 2 seconds. + * @FE_REINIT: Frontend was reinitialized, application is recommended + * to reset DiSEqC, tone and parameters. */ enum fe_status { FE_NONE = 0x00, @@ -137,12 +259,45 @@ enum fe_status { FE_REINIT = 0x40, }; +/** + * enum fe_spectral_inversion - Type of inversion band + * + * @INVERSION_OFF: Don't do spectral band inversion. + * @INVERSION_ON: Do spectral band inversion. + * @INVERSION_AUTO: Autodetect spectral band inversion. + * + * This parameter indicates if spectral inversion should be presumed or + * not. In the automatic setting (``INVERSION_AUTO``) the hardware will try + * to figure out the correct setting by itself. If the hardware doesn't + * support, the DVB core will try to lock at the carrier first with + * inversion off. If it fails, it will try to enable inversion. + */ enum fe_spectral_inversion { INVERSION_OFF, INVERSION_ON, INVERSION_AUTO }; +/** + * enum fe_code_rate - Type of Forward Error Correction (FEC) + * + * + * @FEC_NONE: No Forward Error Correction Code + * @FEC_1_2: Forward Error Correction Code 1/2 + * @FEC_2_3: Forward Error Correction Code 2/3 + * @FEC_3_4: Forward Error Correction Code 3/4 + * @FEC_4_5: Forward Error Correction Code 4/5 + * @FEC_5_6: Forward Error Correction Code 5/6 + * @FEC_6_7: Forward Error Correction Code 6/7 + * @FEC_7_8: Forward Error Correction Code 7/8 + * @FEC_8_9: Forward Error Correction Code 8/9 + * @FEC_AUTO: Autodetect Error Correction Code + * @FEC_3_5: Forward Error Correction Code 3/5 + * @FEC_9_10: Forward Error Correction Code 9/10 + * @FEC_2_5: Forward Error Correction Code 2/5 + * + * Please note that not all FEC types are supported by a given standard. + */ enum fe_code_rate { FEC_NONE = 0, FEC_1_2, @@ -159,6 +314,26 @@ enum fe_code_rate { FEC_2_5, }; +/** + * enum fe_modulation - Type of modulation/constellation + * @QPSK: QPSK modulation + * @QAM_16: 16-QAM modulation + * @QAM_32: 32-QAM modulation + * @QAM_64: 64-QAM modulation + * @QAM_128: 128-QAM modulation + * @QAM_256: 256-QAM modulation + * @QAM_AUTO: Autodetect QAM modulation + * @VSB_8: 8-VSB modulation + * @VSB_16: 16-VSB modulation + * @PSK_8: 8-PSK modulation + * @APSK_16: 16-APSK modulation + * @APSK_32: 32-APSK modulation + * @DQPSK: DQPSK modulation + * @QAM_4_NR: 4-QAM-NR modulation + * + * Please note that not all modulations are supported by a given standard. + * + */ enum fe_modulation { QPSK, QAM_16, @@ -176,6 +351,32 @@ enum fe_modulation { QAM_4_NR, }; +/** + * enum fe_transmit_mode - Transmission mode + * + * @TRANSMISSION_MODE_AUTO: + * Autodetect transmission mode. The hardware will try to find the + * correct FFT-size (if capable) to fill in the missing parameters. + * @TRANSMISSION_MODE_1K: + * Transmission mode 1K + * @TRANSMISSION_MODE_2K: + * Transmission mode 2K + * @TRANSMISSION_MODE_8K: + * Transmission mode 8K + * @TRANSMISSION_MODE_4K: + * Transmission mode 4K + * @TRANSMISSION_MODE_16K: + * Transmission mode 16K + * @TRANSMISSION_MODE_32K: + * Transmission mode 32K + * @TRANSMISSION_MODE_C1: + * Single Carrier (C=1) transmission mode (DTMB only) + * @TRANSMISSION_MODE_C3780: + * Multi Carrier (C=3780) transmission mode (DTMB only) + * + * Please note that not all transmission modes are supported by a given + * standard. + */ enum fe_transmit_mode { TRANSMISSION_MODE_2K, TRANSMISSION_MODE_8K, @@ -188,6 +389,23 @@ enum fe_transmit_mode { TRANSMISSION_MODE_C3780, }; +/** + * enum fe_guard_interval - Guard interval + * + * @GUARD_INTERVAL_AUTO: Autodetect the guard interval + * @GUARD_INTERVAL_1_128: Guard interval 1/128 + * @GUARD_INTERVAL_1_32: Guard interval 1/32 + * @GUARD_INTERVAL_1_16: Guard interval 1/16 + * @GUARD_INTERVAL_1_8: Guard interval 1/8 + * @GUARD_INTERVAL_1_4: Guard interval 1/4 + * @GUARD_INTERVAL_19_128: Guard interval 19/128 + * @GUARD_INTERVAL_19_256: Guard interval 19/256 + * @GUARD_INTERVAL_PN420: PN length 420 (1/4) + * @GUARD_INTERVAL_PN595: PN length 595 (1/6) + * @GUARD_INTERVAL_PN945: PN length 945 (1/9) + * + * Please note that not all guard intervals are supported by a given standard. + */ enum fe_guard_interval { GUARD_INTERVAL_1_32, GUARD_INTERVAL_1_16, @@ -202,6 +420,16 @@ enum fe_guard_interval { GUARD_INTERVAL_PN945, }; +/** + * enum fe_hierarchy - Hierarchy + * @HIERARCHY_NONE: No hierarchy + * @HIERARCHY_AUTO: Autodetect hierarchy (if supported) + * @HIERARCHY_1: Hierarchy 1 + * @HIERARCHY_2: Hierarchy 2 + * @HIERARCHY_4: Hierarchy 4 + * + * Please note that not all hierarchy types are supported by a given standard. + */ enum fe_hierarchy { HIERARCHY_NONE, HIERARCHY_1, @@ -210,6 +438,15 @@ enum fe_hierarchy { HIERARCHY_AUTO }; +/** + * enum fe_interleaving - Interleaving + * @INTERLEAVING_NONE: No interleaving. + * @INTERLEAVING_AUTO: Auto-detect interleaving. + * @INTERLEAVING_240: Interleaving of 240 symbols. + * @INTERLEAVING_720: Interleaving of 720 symbols. + * + * Please note that, currently, only DTMB uses it. + */ enum fe_interleaving { INTERLEAVING_NONE, INTERLEAVING_AUTO, @@ -217,7 +454,8 @@ enum fe_interleaving { INTERLEAVING_720, }; -/* S2API Commands */ +/* DVBv5 property Commands */ + #define DTV_UNDEFINED 0 #define DTV_TUNE 1 #define DTV_CLEAR 2 @@ -310,19 +548,79 @@ enum fe_interleaving { #define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT +/** + * enum fe_pilot - Type of pilot tone + * + * @PILOT_ON: Pilot tones enabled + * @PILOT_OFF: Pilot tones disabled + * @PILOT_AUTO: Autodetect pilot tones + */ enum fe_pilot { PILOT_ON, PILOT_OFF, PILOT_AUTO, }; +/** + * enum fe_rolloff - Rolloff factor (also known as alpha) + * @ROLLOFF_35: Roloff factor: 35% + * @ROLLOFF_20: Roloff factor: 20% + * @ROLLOFF_25: Roloff factor: 25% + * @ROLLOFF_AUTO: Auto-detect the roloff factor. + * + * .. note: + * + * Roloff factor of 35% is implied on DVB-S. On DVB-S2, it is default. + */ enum fe_rolloff { - ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */ + ROLLOFF_35, ROLLOFF_20, ROLLOFF_25, ROLLOFF_AUTO, }; +/** + * enum fe_delivery_system - Type of the delivery system + * + * @SYS_UNDEFINED: + * Undefined standard. Generally, indicates an error + * @SYS_DVBC_ANNEX_A: + * Cable TV: DVB-C following ITU-T J.83 Annex A spec + * @SYS_DVBC_ANNEX_B: + * Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) + * @SYS_DVBC_ANNEX_C: + * Cable TV: DVB-C following ITU-T J.83 Annex C spec + * @SYS_ISDBC: + * Cable TV: ISDB-C (no drivers yet) + * @SYS_DVBT: + * Terrestrial TV: DVB-T + * @SYS_DVBT2: + * Terrestrial TV: DVB-T2 + * @SYS_ISDBT: + * Terrestrial TV: ISDB-T + * @SYS_ATSC: + * Terrestrial TV: ATSC + * @SYS_ATSCMH: + * Terrestrial TV (mobile): ATSC-M/H + * @SYS_DTMB: + * Terrestrial TV: DTMB + * @SYS_DVBS: + * Satellite TV: DVB-S + * @SYS_DVBS2: + * Satellite TV: DVB-S2 + * @SYS_TURBO: + * Satellite TV: DVB-S Turbo + * @SYS_ISDBS: + * Satellite TV: ISDB-S + * @SYS_DAB: + * Digital audio: DAB (not fully supported) + * @SYS_DSS: + * Satellite TV: DSS (not fully supported) + * @SYS_CMMB: + * Terrestrial TV (mobile): CMMB (not fully supported) + * @SYS_DVBH: + * Terrestrial TV (mobile): DVB-H (standard deprecated) + */ enum fe_delivery_system { SYS_UNDEFINED, SYS_DVBC_ANNEX_A, @@ -345,35 +643,85 @@ enum fe_delivery_system { SYS_DVBC_ANNEX_C, }; -/* backward compatibility */ +/* backward compatibility definitions for delivery systems */ #define SYS_DVBC_ANNEX_AC SYS_DVBC_ANNEX_A -#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB instead */ +#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB */ -/* ATSC-MH */ +/* ATSC-MH specific parameters */ +/** + * enum atscmh_sccc_block_mode - Type of Series Concatenated Convolutional + * Code Block Mode. + * + * @ATSCMH_SCCC_BLK_SEP: + * Separate SCCC: the SCCC outer code mode shall be set independently + * for each Group Region (A, B, C, D) + * @ATSCMH_SCCC_BLK_COMB: + * Combined SCCC: all four Regions shall have the same SCCC outer + * code mode. + * @ATSCMH_SCCC_BLK_RES: + * Reserved. Shouldn't be used. + */ enum atscmh_sccc_block_mode { ATSCMH_SCCC_BLK_SEP = 0, ATSCMH_SCCC_BLK_COMB = 1, ATSCMH_SCCC_BLK_RES = 2, }; +/** + * enum atscmh_sccc_code_mode - Type of Series Concatenated Convolutional + * Code Rate. + * + * @ATSCMH_SCCC_CODE_HLF: + * The outer code rate of a SCCC Block is 1/2 rate. + * @ATSCMH_SCCC_CODE_QTR: + * The outer code rate of a SCCC Block is 1/4 rate. + * @ATSCMH_SCCC_CODE_RES: + * Reserved. Should not be used. + */ enum atscmh_sccc_code_mode { ATSCMH_SCCC_CODE_HLF = 0, ATSCMH_SCCC_CODE_QTR = 1, ATSCMH_SCCC_CODE_RES = 2, }; +/** + * enum atscmh_rs_frame_ensemble - Reed Solomon(RS) frame ensemble. + * + * @ATSCMH_RSFRAME_ENS_PRI: Primary Ensemble. + * @ATSCMH_RSFRAME_ENS_SEC: Secondary Ensemble. + */ enum atscmh_rs_frame_ensemble { ATSCMH_RSFRAME_ENS_PRI = 0, ATSCMH_RSFRAME_ENS_SEC = 1, }; +/** + * enum atscmh_rs_frame_mode - Reed Solomon (RS) frame mode. + * + * @ATSCMH_RSFRAME_PRI_ONLY: + * Single Frame: There is only a primary RS Frame for all Group + * Regions. + * @ATSCMH_RSFRAME_PRI_SEC: + * Dual Frame: There are two separate RS Frames: Primary RS Frame for + * Group Region A and B and Secondary RS Frame for Group Region C and + * D. + * @ATSCMH_RSFRAME_RES: + * Reserved. Shouldn't be used. + */ enum atscmh_rs_frame_mode { ATSCMH_RSFRAME_PRI_ONLY = 0, ATSCMH_RSFRAME_PRI_SEC = 1, ATSCMH_RSFRAME_RES = 2, }; +/** + * enum atscmh_rs_code_mode + * @ATSCMH_RSCODE_211_187: Reed Solomon code (211,187). + * @ATSCMH_RSCODE_223_187: Reed Solomon code (223,187). + * @ATSCMH_RSCODE_235_187: Reed Solomon code (235,187). + * @ATSCMH_RSCODE_RES: Reserved. Shouldn't be used. + */ enum atscmh_rs_code_mode { ATSCMH_RSCODE_211_187 = 0, ATSCMH_RSCODE_223_187 = 1, @@ -385,16 +733,17 @@ enum atscmh_rs_code_mode { #define LNA_AUTO (~0U) /** - * Scale types for the quality parameters. + * enum fecap_scale_params - scale types for the quality parameters. + * * @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That * could indicate a temporary or a permanent * condition. * @FE_SCALE_DECIBEL: The scale is measured in 0.001 dB steps, typically - * used on signal measures. + * used on signal measures. * @FE_SCALE_RELATIVE: The scale is a relative percentual measure, - * ranging from 0 (0%) to 0xffff (100%). + * ranging from 0 (0%) to 0xffff (100%). * @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like - * bit error, block error, lapsed time. + * bit error, block error, lapsed time. */ enum fecap_scale_params { FE_SCALE_NOT_AVAILABLE = 0, @@ -406,24 +755,38 @@ enum fecap_scale_params { /** * struct dtv_stats - Used for reading a DTV status property * - * @value: value of the measure. Should range from 0 to 0xffff; * @scale: Filled with enum fecap_scale_params - the scale * in usage for that parameter * + * The ``{unnamed_union}`` may have either one of the values below: + * + * %svalue + * integer value of the measure, for %FE_SCALE_DECIBEL, + * used for dB measures. The unit is 0.001 dB. + * + * %uvalue + * unsigned integer value of the measure, used when @scale is + * either %FE_SCALE_RELATIVE or %FE_SCALE_COUNTER. + * * For most delivery systems, this will return a single value for each * parameter. + * * It should be noticed, however, that new OFDM delivery systems like * ISDB can use different modulation types for each group of carriers. * On such standards, up to 8 groups of statistics can be provided, one * for each carrier group (called "layer" on ISDB). + * * In order to be consistent with other delivery systems, the first * value refers to the entire set of carriers ("global"). - * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when + * + * @scale should use the value %FE_SCALE_NOT_AVAILABLE when * the value for the entire group of carriers or from one specific layer * is not provided by the hardware. - * st.len should be filled with the latest filled status + 1. * - * In other words, for ISDB, those values should be filled like: + * @len should be filled with the latest filled status + 1. + * + * In other words, for ISDB, those values should be filled like:: + * * u.st.stat.svalue[0] = global statistics; * u.st.stat.scale[0] = FE_SCALE_DECIBEL; * u.st.stat.value[1] = layer A statistics; @@ -445,11 +808,39 @@ struct dtv_stats { #define MAX_DTV_STATS 4 +/** + * struct dtv_fe_stats - store Digital TV frontend statistics + * + * @len: length of the statistics - if zero, stats is disabled. + * @stat: array with digital TV statistics. + * + * On most standards, @len can either be 0 or 1. However, for ISDB, each + * layer is modulated in separate. So, each layer may have its own set + * of statistics. If so, stat[0] carries on a global value for the property. + * Indexes 1 to 3 means layer A to B. + */ struct dtv_fe_stats { __u8 len; struct dtv_stats stat[MAX_DTV_STATS]; } __attribute__ ((packed)); +/** + * struct dtv_property - store one of frontend command and its value + * + * @cmd: Digital TV command. + * @reserved: Not used. + * @u: Union with the values for the command. + * @result: Result of the command set (currently unused). + * + * The @u union may have either one of the values below: + * + * %data + * an unsigned 32-bits number. + * %st + * a &struct dtv_fe_stats array of statistics. + * %buffer + * a buffer of up to 32 characters (currently unused). + */ struct dtv_property { __u32 cmd; __u32 reserved[3]; @@ -469,17 +860,70 @@ struct dtv_property { /* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ #define DTV_IOCTL_MAX_MSGS 64 +/** + * struct dtv_properties - a set of command/value pairs. + * + * @num: amount of commands stored at the struct. + * @props: a pointer to &struct dtv_property. + */ struct dtv_properties { __u32 num; struct dtv_property *props; }; +/* + * When set, this flag will disable any zigzagging or other "normal" tuning + * behavior. Additionally, there will be no automatic monitoring of the lock + * status, and hence no frontend events will be generated. If a frontend device + * is closed, this flag will be automatically turned off when the device is + * reopened read-write. + */ +#define FE_TUNE_MODE_ONESHOT 0x01 + +/* Digital TV Frontend API calls */ + +#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info) + +#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62) +#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd) +#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply) +#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */ + +#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */ +#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */ +#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */ + +#define FE_READ_STATUS _IOR('o', 69, fe_status_t) +#define FE_READ_BER _IOR('o', 70, __u32) +#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) +#define FE_READ_SNR _IOR('o', 72, __u16) +#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32) + +#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */ +#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event) + +#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */ + +#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) +#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) + #if defined(__DVB_CORE__) || !defined (__KERNEL__) /* - * DEPRECATED: The DVBv3 ioctls, structs and enums should not be used on - * newer programs, as it doesn't support the second generation of digital - * TV standards, nor supports newer delivery systems. + * DEPRECATED: Everything below is deprecated in favor of DVBv5 API + * + * The DVBv3 only ioctls, structs and enums should not be used on + * newer programs, as it doesn't support the second generation of + * digital TV standards, nor supports newer delivery systems. + * They also don't support modern frontends with usually support multiple + * delivery systems. + * + * Drivers shouldn't use them. + * + * New applications should use DVBv5 delivery system instead + */ + +/* */ enum fe_bandwidth { @@ -492,7 +936,7 @@ enum fe_bandwidth { BANDWIDTH_1_712_MHZ, }; -/* This is needed for legacy userspace support */ +/* This is kept for legacy userspace support */ typedef enum fe_sec_voltage fe_sec_voltage_t; typedef enum fe_caps fe_caps_t; typedef enum fe_type fe_type_t; @@ -510,6 +954,8 @@ typedef enum fe_pilot fe_pilot_t; typedef enum fe_rolloff fe_rolloff_t; typedef enum fe_delivery_system fe_delivery_system_t; +/* DVBv3 structs */ + struct dvb_qpsk_parameters { __u32 symbol_rate; /* symbol rate in Symbols per second */ fe_code_rate_t fec_inner; /* forward error correction (see above) */ @@ -551,42 +997,12 @@ struct dvb_frontend_event { fe_status_t status; struct dvb_frontend_parameters parameters; }; -#endif -#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) -#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) - -/** - * When set, this flag will disable any zigzagging or other "normal" tuning - * behaviour. Additionally, there will be no automatic monitoring of the lock - * status, and hence no frontend events will be generated. If a frontend device - * is closed, this flag will be automatically turned off when the device is - * reopened read-write. - */ -#define FE_TUNE_MODE_ONESHOT 0x01 - -#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info) - -#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62) -#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd) -#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply) -#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */ - -#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */ -#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */ -#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */ - -#define FE_READ_STATUS _IOR('o', 69, fe_status_t) -#define FE_READ_BER _IOR('o', 70, __u32) -#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) -#define FE_READ_SNR _IOR('o', 72, __u16) -#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32) +/* DVBv3 API calls */ #define FE_SET_FRONTEND _IOW('o', 76, struct dvb_frontend_parameters) #define FE_GET_FRONTEND _IOR('o', 77, struct dvb_frontend_parameters) -#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */ -#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event) -#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */ +#endif #endif /*_DVBFRONTEND_H_*/