From 9439eac79f1edae172f7c54dce61c4fe2c8308ad Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Oct 2013 09:59:25 +0200 Subject: [PATCH 1/4] iwlwifi: pcie: poke device when commands don't complete quickly In certain corner cases in the firmware implementation, powersave transitions can cause the firmware to miss the fact that commands were added to the queue/FIFO and thus never processes them. Since the commands really are in the queue, try to poke the firmware in such cases (by grabbing NIC access, which wakes up the NIC) so it notices the new command and processes it. Reviewed-by: Alexander Bondar Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 31 +++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 1424335163b9..80f1956b3be3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1465,7 +1465,8 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, spin_unlock_bh(&txq->lock); } -#define HOST_COMPLETE_TIMEOUT (2 * HZ) +#define HOST_COMPLETE_TIMEOUT (2 * HZ) +#define COMMAND_POKE_TIMEOUT (HZ / 10) static int iwl_pcie_send_hcmd_async(struct iwl_trans *trans, struct iwl_host_cmd *cmd) @@ -1493,6 +1494,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans, struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); int cmd_idx; int ret; + int timeout = HOST_COMPLETE_TIMEOUT; IWL_DEBUG_INFO(trans, "Attempting to send sync command %s\n", get_cmd_string(trans_pcie, cmd->id)); @@ -1517,10 +1519,29 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans, return ret; } - ret = wait_event_timeout(trans_pcie->wait_command_queue, - !test_bit(STATUS_HCMD_ACTIVE, - &trans_pcie->status), - HOST_COMPLETE_TIMEOUT); + while (timeout > 0) { + unsigned long flags; + + timeout -= COMMAND_POKE_TIMEOUT; + ret = wait_event_timeout(trans_pcie->wait_command_queue, + !test_bit(STATUS_HCMD_ACTIVE, + &trans_pcie->status), + COMMAND_POKE_TIMEOUT); + if (ret) + break; + /* poke the device - it may have lost the command */ + if (iwl_trans_grab_nic_access(trans, true, &flags)) { + iwl_trans_release_nic_access(trans, &flags); + IWL_DEBUG_INFO(trans, + "Tried to wake NIC for command %s\n", + get_cmd_string(trans_pcie, cmd->id)); + } else { + IWL_ERR(trans, "Failed to poke NIC for command %s\n", + get_cmd_string(trans_pcie, cmd->id)); + break; + } + } + if (!ret) { if (test_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status)) { struct iwl_txq *txq = From f39a52bfaf65de87a363d471ed02a3fef0752a1d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 9 Oct 2013 15:24:30 +0200 Subject: [PATCH 2/4] iwlwifi: don't WARN on bad firmware state When we restart firmware and it is marked as not alive, we can still get calls from mac80211. Don't WARN on in this situation as this triggers automatic bug reports with no valuable information. This continuation of: commit 8ca95995e64f5d270889badb3e449dca91106a2b Author: Emmanuel Grumbach Date: Sun Sep 15 11:37:17 2013 +0300 iwlwifi: don't WARN on host commands sent when firmware is dead which remove WARN_ONCE from one place, but those warnings are also triggered from other functions. Patch also adds unlikely() statement. Signed-off-by: Stanislaw Gruszka Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-trans.h | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 80b47508647c..c6bac7c90b00 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -601,7 +601,7 @@ static inline int iwl_trans_send_cmd(struct iwl_trans *trans, { int ret; - if (trans->state != IWL_TRANS_FW_ALIVE) { + if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); return -EIO; } @@ -640,8 +640,8 @@ static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans, static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, int queue) { - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); + if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); return trans->ops->tx(trans, skb, dev_cmd, queue); } @@ -649,16 +649,16 @@ static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue, int ssn, struct sk_buff_head *skbs) { - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); + if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); trans->ops->reclaim(trans, queue, ssn, skbs); } static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue) { - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); + if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); trans->ops->txq_disable(trans, queue); } @@ -669,8 +669,8 @@ static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue, { might_sleep(); - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); + if (unlikely((trans->state != IWL_TRANS_FW_ALIVE))) + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); trans->ops->txq_enable(trans, queue, fifo, sta_id, tid, frame_limit, ssn); @@ -685,8 +685,8 @@ static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans) { - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); + if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); return trans->ops->wait_tx_queue_empty(trans); } From 2a3115434a773fdc34ea125890f75fbc0b34dcaf Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 15 Sep 2013 16:17:48 +0200 Subject: [PATCH 3/4] iwlwifi: mvm: fix scan request's suspend time parameter This fix is related to a scan request when associated (bgscan). FW expects suspend time parameter in micro seconds while the driver provides a value in time units. This bug leads to a high traffic latency when scan is requested while traffic is in progress. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/scan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 621fb71f282a..3a06832e8e90 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -93,10 +93,10 @@ static inline __le32 iwl_mvm_scan_max_out_time(struct ieee80211_vif *vif) static inline __le32 iwl_mvm_scan_suspend_time(struct ieee80211_vif *vif) { - if (vif->bss_conf.assoc) - return cpu_to_le32(vif->bss_conf.beacon_int); - else + if (!vif->bss_conf.assoc) return 0; + + return cpu_to_le32(ieee80211_tu_to_usec(vif->bss_conf.beacon_int)); } static inline __le32 From f6b129527ca15bae29ffb9417ddaa1c9d99ffc5d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 15 Oct 2013 22:04:54 +0300 Subject: [PATCH 4/4] iwlwifi: dvm: don't override mac80211's queue setting Since we set IEEE80211_HW_QUEUE_CONTROL, we can let mac80211 do the queue assignement and don't need to override its decisions. While reassiging the same values is harmless of course, it triggered a WARNING when iwlwifi and mac80211 came to different conclusions. This happened when mac80211 set IEEE80211_TX_CTL_SEND_AFTER_DTIM, but didn't route the packet to the cab_queue because no stations were asleep. iwlwifi should not override mac80211's decicions for offchannel packets and packets to be sent after DTIM, but it should override mac80211's decision for AMPDUs since we have a special queue for them. So for AMPDU, we still override info->hw_queue by the AMPDU queue. This avoids: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2531 at drivers/net/wireless/iwlwifi/dvm/tx.c:456 iwlagn_tx_skb+0x6c5/0x883() Modules linked in: CPU: 0 PID: 2531 Comm: hostapd Not tainted 3.12.0-rc5+ #1 Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013 0000000000000000 0000000000000009 ffffffff8189aa62 0000000000000000 ffffffff8105a4f2 ffff880058339a48 ffffffff815f8a04 0000000000000000 ffff8800560097b0 0000000000000208 0000000000000000 ffff8800561a9e5e Call Trace: [] ? dump_stack+0x41/0x51 [] ? warn_slowpath_common+0x78/0x90 [] ? iwlagn_tx_skb+0x6c5/0x883 [] ? iwlagn_tx_skb+0x6c5/0x883 [] ? put_cred+0x15/0x15 [] ? iwlagn_mac_tx+0x19/0x2f [] ? __ieee80211_tx+0x226/0x29b [] ? ieee80211_tx+0xa6/0xb5 [] ? ieee80211_monitor_start_xmit+0x1e9/0x204 [] ? dev_hard_start_xmit+0x271/0x3ec [] ? sch_direct_xmit+0x66/0x164 [] ? dev_queue_xmit+0x1e5/0x3c8 [] ? packet_sendmsg+0xac5/0xb3d [] ? sock_sendmsg+0x37/0x52 [] ? __do_fault+0x338/0x36b [] ? verify_iovec+0x44/0x94 [] ? ___sys_sendmsg+0x1f1/0x283 [] ? __inode_wait_for_writeback+0x67/0xae [] ? __cache_free.isra.46+0x178/0x187 [] ? kmem_cache_free+0x44/0x84 [] ? dentry_kill+0x13d/0x149 [] ? dput+0xe5/0xef [] ? fget_light+0x2e/0x7c [] ? __sys_sendmsg+0x39/0x57 [] ? system_call_fastpath+0x16/0x1b ---[ end trace 1b3eb79359c1d1e6 ]--- Reported-by: Sander Eikelenboom Reviewed-by: Johannes Berg Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/tx.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index da442b81370a..1fef5240e6ad 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -433,27 +433,19 @@ int iwlagn_tx_skb(struct iwl_priv *priv, /* Copy MAC header from skb into command buffer */ memcpy(tx_cmd->hdr, hdr, hdr_len); + txq_id = info->hw_queue; + if (is_agg) txq_id = priv->tid_data[sta_id][tid].agg.txq_id; else if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { - /* - * Send this frame after DTIM -- there's a special queue - * reserved for this for contexts that support AP mode. - */ - txq_id = ctx->mcast_queue; - /* * The microcode will clear the more data * bit in the last frame it transmits. */ hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); - } else if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) - txq_id = IWL_AUX_QUEUE; - else - txq_id = ctx->ac_to_queue[skb_get_queue_mapping(skb)]; + } - WARN_ON_ONCE(!is_agg && txq_id != info->hw_queue); WARN_ON_ONCE(is_agg && priv->queue_to_mac80211[txq_id] != info->hw_queue);