mirror of https://gitee.com/openkylin/linux.git
net: ethernet: ti: cpsw: add .ndo to set per-queue rate
This patch allows to rate limit queues tx queues for cpsw interface. The rate is set in absolute Mb/s units and cannot be more a speed an interface is connected with. The rate for a tx queue can be tested with: ethtool -L eth0 rx 4 tx 4 echo 100 > /sys/class/net/eth0/queues/tx-0/tx_maxrate echo 200 > /sys/class/net/eth0/queues/tx-1/tx_maxrate echo 50 > /sys/class/net/eth0/queues/tx-2/tx_maxrate echo 30 > /sys/class/net/eth0/queues/tx-3/tx_maxrate tc qdisc add dev eth0 root handle 1: multiq tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5001 0xffff action skbedit queue_mapping 0 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5002 0xffff action skbedit queue_mapping 1 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5003 0xffff action skbedit queue_mapping 2 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5004 0xffff action skbedit queue_mapping 3 iperf -c 192.168.2.1 -b 110M -p 5001 -f m -t 60 iperf -c 192.168.2.1 -b 215M -p 5002 -f m -t 60 iperf -c 192.168.2.1 -b 55M -p 5003 -f m -t 60 iperf -c 192.168.2.1 -b 32M -p 5004 -f m -t 60 Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
8f32b90981
commit
83fcad0c98
|
@ -1872,6 +1872,88 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int cpsw_ndo_set_tx_maxrate(struct net_device *ndev, int queue, u32 rate)
|
||||
{
|
||||
struct cpsw_priv *priv = netdev_priv(ndev);
|
||||
int tx_ch_num = ndev->real_num_tx_queues;
|
||||
u32 consumed_rate, min_rate, max_rate;
|
||||
struct cpsw_common *cpsw = priv->cpsw;
|
||||
struct cpsw_slave *slave;
|
||||
int ret, i, weight;
|
||||
int rlim_num = 0;
|
||||
u32 ch_rate;
|
||||
|
||||
ch_rate = netdev_get_tx_queue(ndev, queue)->tx_maxrate;
|
||||
if (ch_rate == rate)
|
||||
return 0;
|
||||
|
||||
if (cpsw->data.dual_emac)
|
||||
slave = &cpsw->slaves[priv->emac_port];
|
||||
else
|
||||
slave = &cpsw->slaves[cpsw->data.active_slave];
|
||||
max_rate = slave->phy->speed;
|
||||
|
||||
consumed_rate = 0;
|
||||
for (i = 0; i < tx_ch_num; i++) {
|
||||
if (i == queue)
|
||||
ch_rate = rate;
|
||||
else
|
||||
ch_rate = netdev_get_tx_queue(ndev, i)->tx_maxrate;
|
||||
|
||||
if (!ch_rate)
|
||||
continue;
|
||||
|
||||
rlim_num++;
|
||||
consumed_rate += ch_rate;
|
||||
}
|
||||
|
||||
if (consumed_rate > max_rate)
|
||||
dev_info(priv->dev, "The common rate shouldn't be more than %dMbps",
|
||||
max_rate);
|
||||
|
||||
if (consumed_rate > max_rate) {
|
||||
if (max_rate == 10 && consumed_rate <= 100) {
|
||||
max_rate = 100;
|
||||
} else if (max_rate <= 100 && consumed_rate <= 1000) {
|
||||
max_rate = 1000;
|
||||
} else {
|
||||
dev_err(priv->dev, "The common rate cannot be more than %dMbps",
|
||||
max_rate);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
if (consumed_rate > max_rate) {
|
||||
dev_err(priv->dev, "The common rate cannot be more than %dMbps",
|
||||
max_rate);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
rate *= 1000;
|
||||
min_rate = cpdma_chan_get_min_rate(cpsw->dma);
|
||||
if ((rate < min_rate && rate)) {
|
||||
dev_err(priv->dev, "The common rate cannot be less than %dMbps",
|
||||
min_rate);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = pm_runtime_get_sync(cpsw->dev);
|
||||
if (ret < 0) {
|
||||
pm_runtime_put_noidle(cpsw->dev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (rlim_num == tx_ch_num)
|
||||
max_rate = consumed_rate;
|
||||
|
||||
weight = (rate * 100) / (max_rate * 1000);
|
||||
cpdma_chan_set_weight(cpsw->txch[queue], weight);
|
||||
|
||||
ret = cpdma_chan_set_rate(cpsw->txch[queue], rate);
|
||||
pm_runtime_put(cpsw->dev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct net_device_ops cpsw_netdev_ops = {
|
||||
.ndo_open = cpsw_ndo_open,
|
||||
.ndo_stop = cpsw_ndo_stop,
|
||||
|
@ -1881,6 +1963,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
|
|||
.ndo_validate_addr = eth_validate_addr,
|
||||
.ndo_tx_timeout = cpsw_ndo_tx_timeout,
|
||||
.ndo_set_rx_mode = cpsw_ndo_set_rx_mode,
|
||||
.ndo_set_tx_maxrate = cpsw_ndo_set_tx_maxrate,
|
||||
#ifdef CONFIG_NET_POLL_CONTROLLER
|
||||
.ndo_poll_controller = cpsw_ndo_poll_controller,
|
||||
#endif
|
||||
|
@ -2100,6 +2183,7 @@ static int cpsw_update_channels_res(struct cpsw_priv *priv, int ch_num, int rx)
|
|||
int (*poll)(struct napi_struct *, int);
|
||||
struct cpsw_common *cpsw = priv->cpsw;
|
||||
void (*handler)(void *, int, int);
|
||||
struct netdev_queue *queue;
|
||||
struct cpdma_chan **chan;
|
||||
int ret, *ch;
|
||||
|
||||
|
@ -2117,6 +2201,8 @@ static int cpsw_update_channels_res(struct cpsw_priv *priv, int ch_num, int rx)
|
|||
|
||||
while (*ch < ch_num) {
|
||||
chan[*ch] = cpdma_chan_create(cpsw->dma, *ch, handler, rx);
|
||||
queue = netdev_get_tx_queue(priv->ndev, *ch);
|
||||
queue->tx_maxrate = 0;
|
||||
|
||||
if (IS_ERR(chan[*ch]))
|
||||
return PTR_ERR(chan[*ch]);
|
||||
|
@ -2791,6 +2877,7 @@ static int cpsw_probe(struct platform_device *pdev)
|
|||
dma_params.desc_align = 16;
|
||||
dma_params.has_ext_regs = true;
|
||||
dma_params.desc_hw_addr = dma_params.desc_mem_phys;
|
||||
dma_params.bus_freq_mhz = cpsw->bus_freq_mhz;
|
||||
|
||||
cpsw->dma = cpdma_ctlr_create(&dma_params);
|
||||
if (!cpsw->dma) {
|
||||
|
|
Loading…
Reference in New Issue