From 88677db54dba68ce19952d5bcdf0fda43094b31f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 26 Apr 2016 12:11:28 +0200 Subject: [PATCH] ARM: dts: at91: VInCo: fix phy reset gpio flag Fix gpio active flag for the phy reset-gpios property. The line is active low instead of active high. Actually, this flags was never used by the macb driver. Reported-by: Sergei Shtylyov Cc: Andrew Lunn Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-vinco.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 79aec55e1ebc..6a366ee952a8 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -118,7 +118,7 @@ macb0: ethernet@f8020000 { ethernet-phy@1 { reg = <0x1>; - reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>; interrupt-parent = <&pioB>; interrupts = <15 IRQ_TYPE_EDGE_FALLING>; }; @@ -162,7 +162,7 @@ ethernet-phy@1 { reg = <0x1>; interrupt-parent = <&pioB>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>; }; };