ACPICA: Split buffer dump routines into separate file

To enhance configurability of ACPICA.  The new file is
utilities/utbuffer.c

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Bob Moore 2013-06-08 00:57:47 +00:00 committed by Rafael J. Wysocki
parent 67a9277496
commit 88ec28603c
3 changed files with 203 additions and 147 deletions

View File

@ -146,6 +146,7 @@ acpi-y += \
acpi-y += \
utaddress.o \
utalloc.o \
utbuffer.o \
utcopy.o \
utexcep.o \
utdebug.o \

View File

@ -0,0 +1,201 @@
/******************************************************************************
*
* Module Name: utbuffer - Buffer dump routines
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utbuffer")
/*******************************************************************************
*
* FUNCTION: acpi_ut_dump_buffer
*
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
* display - BYTE, WORD, DWORD, or QWORD display:
* DB_BYTE_DISPLAY
* DB_WORD_DISPLAY
* DB_DWORD_DISPLAY
* DB_QWORD_DISPLAY
* base_offset - Beginning buffer offset (display only)
*
* RETURN: None
*
* DESCRIPTION: Generic dump buffer in both hex and ascii.
*
******************************************************************************/
void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
{
u32 i = 0;
u32 j;
u32 temp32;
u8 buf_char;
if (!buffer) {
acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n");
return;
}
if ((count < 4) || (count & 0x01)) {
display = DB_BYTE_DISPLAY;
}
/* Nasty little dump buffer routine! */
while (i < count) {
/* Print current offset */
acpi_os_printf("%6.4X: ", (base_offset + i));
/* Print 16 hex chars */
for (j = 0; j < 16;) {
if (i + j >= count) {
/* Dump fill spaces */
acpi_os_printf("%*s", ((display * 2) + 1), " ");
j += display;
continue;
}
switch (display) {
case DB_BYTE_DISPLAY:
default: /* Default is BYTE display */
acpi_os_printf("%02X ",
buffer[(acpi_size) i + j]);
break;
case DB_WORD_DISPLAY:
ACPI_MOVE_16_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%04X ", temp32);
break;
case DB_DWORD_DISPLAY:
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%08X ", temp32);
break;
case DB_QWORD_DISPLAY:
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%08X", temp32);
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j +
4]);
acpi_os_printf("%08X ", temp32);
break;
}
j += display;
}
/*
* Print the ASCII equivalent characters but watch out for the bad
* unprintable ones (printable chars are 0x20 through 0x7E)
*/
acpi_os_printf(" ");
for (j = 0; j < 16; j++) {
if (i + j >= count) {
acpi_os_printf("\n");
return;
}
buf_char = buffer[(acpi_size) i + j];
if (ACPI_IS_PRINT(buf_char)) {
acpi_os_printf("%c", buf_char);
} else {
acpi_os_printf(".");
}
}
/* Done with that line. */
acpi_os_printf("\n");
i += 16;
}
return;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_debug_dump_buffer
*
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
* display - BYTE, WORD, DWORD, or QWORD display:
* DB_BYTE_DISPLAY
* DB_WORD_DISPLAY
* DB_DWORD_DISPLAY
* DB_QWORD_DISPLAY
* component_ID - Caller's component ID
*
* RETURN: None
*
* DESCRIPTION: Generic dump buffer in both hex and ascii.
*
******************************************************************************/
void
acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
{
/* Only dump the buffer if tracing is enabled */
if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
(component_id & acpi_dbg_layer))) {
return;
}
acpi_ut_dump_buffer(buffer, count, display, 0);
}

View File

@ -1,6 +1,6 @@
/******************************************************************************
*
* Module Name: utdebug - Debug print routines
* Module Name: utdebug - Debug print/trace routines
*
*****************************************************************************/
@ -543,149 +543,3 @@ acpi_ut_ptr_exit(u32 line_number,
}
#endif
/*******************************************************************************
*
* FUNCTION: acpi_ut_dump_buffer
*
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
* display - BYTE, WORD, DWORD, or QWORD display
* offset - Beginning buffer offset (display only)
*
* RETURN: None
*
* DESCRIPTION: Generic dump buffer in both hex and ascii.
*
******************************************************************************/
void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
{
u32 i = 0;
u32 j;
u32 temp32;
u8 buf_char;
if (!buffer) {
acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n");
return;
}
if ((count < 4) || (count & 0x01)) {
display = DB_BYTE_DISPLAY;
}
/* Nasty little dump buffer routine! */
while (i < count) {
/* Print current offset */
acpi_os_printf("%6.4X: ", (base_offset + i));
/* Print 16 hex chars */
for (j = 0; j < 16;) {
if (i + j >= count) {
/* Dump fill spaces */
acpi_os_printf("%*s", ((display * 2) + 1), " ");
j += display;
continue;
}
switch (display) {
case DB_BYTE_DISPLAY:
default: /* Default is BYTE display */
acpi_os_printf("%02X ",
buffer[(acpi_size) i + j]);
break;
case DB_WORD_DISPLAY:
ACPI_MOVE_16_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%04X ", temp32);
break;
case DB_DWORD_DISPLAY:
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%08X ", temp32);
break;
case DB_QWORD_DISPLAY:
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%08X", temp32);
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j +
4]);
acpi_os_printf("%08X ", temp32);
break;
}
j += display;
}
/*
* Print the ASCII equivalent characters but watch out for the bad
* unprintable ones (printable chars are 0x20 through 0x7E)
*/
acpi_os_printf(" ");
for (j = 0; j < 16; j++) {
if (i + j >= count) {
acpi_os_printf("\n");
return;
}
buf_char = buffer[(acpi_size) i + j];
if (ACPI_IS_PRINT(buf_char)) {
acpi_os_printf("%c", buf_char);
} else {
acpi_os_printf(".");
}
}
/* Done with that line. */
acpi_os_printf("\n");
i += 16;
}
return;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_debug_dump_buffer
*
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
* display - BYTE, WORD, DWORD, or QWORD display
* component_ID - Caller's component ID
*
* RETURN: None
*
* DESCRIPTION: Generic dump buffer in both hex and ascii.
*
******************************************************************************/
void
acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
{
/* Only dump the buffer if tracing is enabled */
if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
(component_id & acpi_dbg_layer))) {
return;
}
acpi_ut_dump_buffer(buffer, count, display, 0);
}