openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

doc: dt-binding: ci-hdrc-usb2: add property for samsung picophy 

Add two parameters which are used to tune USB signal for samsung picophy,
which is used at imx7d, imx8mm, and imx8mn.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
This commit is contained in:
Peter Chen 2018-08-21 17:15:36 +08:00
parent 28157b8c7d
commit 8977c947b3
No known key found for this signature in database
GPG Key ID: 4859298150D671BB
1 changed files with 9 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
View File

@ -100,6 +100,15 @@ i.mx specific properties
It's recommended to specify the over current polarity.
- power-active-high: power signal polarity is active high
- external-vbus-divider: enables off-chip resistor divider for Vbus
- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current
Control. This signal controls the amount of current sourced to the
USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition.
The range is from 0x0 to 0x3, the default value is 0x1.
Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1.
- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment.
Adjust the high-speed transmitter DC level voltage.
The range is from 0x0 to 0xf, the default value is 0x3.
Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
Example: