openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

hwmon: (ina2xx) make shunt resistance configurable at run-time 

The shunt resistance can only be set via platform_data or device tree. This
isn't suitable for devices in which the shunt resistance can change/isn't
known at boot-time.

Add a sysfs attribute that allows to read and set the shunt resistance.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Bartosz Golaszewski 2015-01-05 15:20:55 +01:00 committed by Guenter Roeck
parent e794704000
commit 8a5fc79513
2 changed files with 49 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/hwmon/ina2xx
View File

@ -44,6 +44,7 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage.
The INA230 is a high or low side current shunt and power monitor with an I2C
interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
The shunt value in micro-ohms can be set via platform data or device tree.
Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
The shunt value in micro-ohms can be set via platform data or device tree at
compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
if the device tree is used.

48
drivers/hwmon/ina2xx.c
View File

@ -115,6 +115,12 @@ static const struct ina2xx_config ina2xx_config[] = {
},
};
static int ina2xx_calibrate(struct ina2xx_data *data)
{
return i2c_smbus_write_word_swapped(data->client, INA2XX_CALIBRATION,
data->config->calibration_factor / data->rshunt);
}
/*
* Initialize the configuration and calibration registers.
*/
@ -133,8 +139,7 @@ static int ina2xx_init(struct ina2xx_data *data)
* Set current LSB to 1mA, shunt is in uOhms
* (equation 13 in datasheet).
*/
return i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
data->config->calibration_factor / data->rshunt);
return ina2xx_calibrate(data);
}
static int ina2xx_do_update(struct device *dev)
@ -231,6 +236,9 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
/* signed register, LSB=1mA (selected), in mA */
val = (s16)data->regs[reg];
break;
case INA2XX_CALIBRATION:
val = data->config->calibration_factor / data->regs[reg];
break;
default:
/* programmer goofed */
WARN_ON_ONCE(1);
@ -254,6 +262,36 @@ static ssize_t ina2xx_show_value(struct device *dev,
ina2xx_get_value(data, attr->index));
}
static ssize_t ina2xx_set_shunt(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct ina2xx_data *data = ina2xx_update_device(dev);
unsigned long val;
int status;
if (IS_ERR(data))
return PTR_ERR(data);
status = kstrtoul(buf, 10, &val);
if (status < 0)
return status;
if (val == 0 ||
/* Values greater than the calibration factor make no sense. */
val > data->config->calibration_factor)
return -EINVAL;
mutex_lock(&data->update_lock);
data->rshunt = val;
status = ina2xx_calibrate(data);
mutex_unlock(&data->update_lock);
if (status < 0)
return status;
return count;
}
/* shunt voltage */
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL,
INA2XX_SHUNT_VOLTAGE);
@ -270,12 +308,18 @@ static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL,
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
INA2XX_POWER);
/* shunt resistance */
static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR,
ina2xx_show_value, ina2xx_set_shunt,
INA2XX_CALIBRATION);
/* pointers to created device attributes */
static struct attribute *ina2xx_attrs[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
&sensor_dev_attr_shunt_resistor.dev_attr.attr,
NULL,
};
ATTRIBUTE_GROUPS(ina2xx);