drm/panel: Changes for v3.19-rc1

This contains support for a couple of new panels, updates for some GPIO
 API changes and a bunch of updates to the MIPI DSI support that should
 make it easier to write panel drivers in the future.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUZKsmAAoJEN0jrNd/PrOhvoQP/Ryl8OHSEOB6vNxn7cmz3nQf
 0l+2Q3V3qpJALC3Dlm57kSF1760mHNjPuwiVLhjINn5zcDS4kB3Llgx/dmAzgTZA
 Ikm8iDgcOmlBUBE1W5YuzdSCXJK8Eth9JQiA4yQVS0RWi+WEClwb+F7KBLi+9Ep3
 1C3qURrBAfe9DRzU4GswrsCzBQACCKH8f+2OcYeFMW0eMa7ejHNs+n0wi6lMLvLn
 JrxEuMBKWdXbM2sw4UXvpVZm3CTh8dJtXBkpwOBK75XhY9DSsrqmbdk0qKIDCY+y
 JB/5UTU2sg37ZFnvhFoHN10AtXWnGbwS2iCitNSmKaBOARVbcoWk9pJtR3AHc44c
 cpLVTsJgZStYZAydtVZKQDJWLNTnTMtyLPcy9eq6kLMc8sVe930U8IsGQyihyyUU
 cSDP8Z6THZ2zHqfDnmogjm8XWsUa+LimNwAgm5oub8JKxdqGb49J8ry+Ny4a19cS
 MgqVZE85K9aF7e/VxeGFiIpUb5ax5bLQxrcpVJg/d2TFuftNBslmL3FOkvEbwrLM
 WS9KJ8e8VIRNoI5dtemfx0+LGlLwoPaUWSeWpb8OxUAuy6e5NabazkFQuCb5E+HM
 JLqnMFCCVvwtGyr+DrFiF4ye8ZTZNcFcdidgB4mr9D5k7RksyeZTT4vz13y2JyAr
 VcfbBQICIQzn91osEetJ
 =+xMK
 -----END PGP SIGNATURE-----

Merge tag 'drm/panel/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next

drm/panel: Changes for v3.19-rc1

This contains support for a couple of new panels, updates for some GPIO
API changes and a bunch of updates to the MIPI DSI support that should
make it easier to write panel drivers in the future.

* tag 'drm/panel/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux: (31 commits)
  drm/panel: Add Sharp LQ101R1SX01 support
  drm/dsi: Do not require .owner field to be set
  drm/dsi: Resolve MIPI DSI device from phandle
  drm/dsi: Implement DCS set_{column,page}_address commands
  drm/dsi: Implement DCS {get,set}_pixel_format commands
  drm/dsi: Implement DCS get_power_mode command
  drm/dsi: Implement DCS soft_reset command
  drm/dsi: Implement DCS nop command
  drm/dsi: Add to DocBook documentation
  drm/dsi: Implement some standard DCS commands
  drm/dsi: Implement generic read and write commands
  drm/panel: s6e8aa0: Use standard MIPI DSI function
  drm/dsi: Add mipi_dsi_set_maximum_return_packet_size() helper
  drm/dsi: Constify mipi_dsi_msg
  drm/dsi: Make mipi_dsi_dcs_{read,write}() symmetrical
  drm/dsi: Add DSI transfer helper
  drm/dsi: Add message to packet translator
  drm/dsi: Introduce packet format helpers
  drm/panel: s6e8aa0: Fix build warnings on 64-bit
  drm/panel: ld9040: Fix build warnings on 64-bit
  ...

Documentation/DocBook/drm.tmpl

@@ -2366,6 +2366,12 @@ void intel_crt_init(struct drm_device *dev)
 !Pdrivers/gpu/drm/drm_dp_mst_topology.c dp mst helper
 !Iinclude/drm/drm_dp_mst_helper.h
 !Edrivers/gpu/drm/drm_dp_mst_topology.c
+    </sect2>
+    <sect2>
+      <title>MIPI DSI Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_mipi_dsi.c dsi helpers
+!Iinclude/drm/drm_mipi_dsi.h
+!Edrivers/gpu/drm/drm_mipi_dsi.c
     </sect2>
     <sect2>
       <title>EDID Helper Functions Reference</title>

Documentation/devicetree/bindings/panel/auo,b116xw03.txt

@@ -0,0 +1,7 @@
+AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b116xw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/hannstar,hsd070pww1.txt

@@ -0,0 +1,7 @@
+HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "hannstar,hsd070pww1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt

@@ -0,0 +1,7 @@
+Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "hit,tx23d38vm0caa"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/innolux,g121i1-l01.txt

@@ -0,0 +1,7 @@
+Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121i1-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt

@@ -0,0 +1,49 @@
+Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+This panel requires a dual-channel DSI host to operate. It supports two modes:
+- left-right: each channel drives the left or right half of the screen
+- even-odd: each channel drives the even or odd lines of the screen
+
+Each of the DSI channels controls a separate DSI peripheral. The peripheral
+driven by the first link (DSI-LINK1), left or even, is considered the primary
+peripheral and controls the device. The 'link2' property contains a phandle
+to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+Note that in video mode the DSI-LINK1 interface always provides the left/even
+pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+is possible to program either link to drive the left/even or right/odd pixels
+but for the sake of consistency this binding assumes that the same assignment
+is chosen as for video mode.
+
+Required properties:
+- compatible: should be "sharp,lq101r1sx01"
+- reg: DSI virtual channel of the peripheral
+
+Required properties (for DSI-LINK1 only):
+- link2: phandle to the DSI peripheral on the secondary link. Note that the
+  presence of this property marks the containing node as DSI-LINK1.
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties (for DSI-LINK1 only):
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	dsi@54300000 {
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+		};
+	};
+
+	dsi@54400000 {
+		secondary: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+		};
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -64,8 +64,10 @@ gmt	Global Mixed-mode Technology, Inc.
 google	Google, Inc.
 gumstix	Gumstix, Inc.
 gw	Gateworks Corporation
+hannstar	HannStar Display Corporation
 haoyu	Haoyu Microelectronic Co. Ltd.
 hisilicon	Hisilicon Limited.
+hit	Hitachi Ltd.
 honeywell	Honeywell
 hp	Hewlett Packard
 i2se	I2SE GmbH

drivers/gpu/drm/drm_mipi_dsi.c

@@ -35,6 +35,16 @@
 
 #include <video/mipi_display.h>
 
+/**
+ * DOC: dsi helpers
+ *
+ * These functions contain some common logic and helpers to deal with MIPI DSI
+ * peripherals.
+ *
+ * Helpers are provided for a number of standard MIPI DSI command as well as a
+ * subset of the MIPI DCS command set.
+ */
+
 static int mipi_dsi_device_match(struct device *dev, struct device_driver *drv)
 {
 	return of_driver_match_device(dev, drv);
@@ -57,6 +67,29 @@ static struct bus_type mipi_dsi_bus_type = {
 	.pm = &mipi_dsi_device_pm_ops,
 };
 
+static int of_device_match(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * of_find_mipi_dsi_device_by_node() - find the MIPI DSI device matching a
+ *    device tree node
+ * @np: device tree node
+ *
+ * Return: A pointer to the MIPI DSI device corresponding to @np or NULL if no
+ *    such device exists (or has not been registered yet).
+ */
+struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&mipi_dsi_bus_type, NULL, np, of_device_match);
+
+	return dev ? to_mipi_dsi_device(dev) : NULL;
+}
+EXPORT_SYMBOL(of_find_mipi_dsi_device_by_node);
+
 static void mipi_dsi_dev_release(struct device *dev)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
@@ -198,59 +231,351 @@ int mipi_dsi_detach(struct mipi_dsi_device *dsi)
 }
 EXPORT_SYMBOL(mipi_dsi_detach);
 
-/**
+static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi,
- * mipi_dsi_dcs_write - send DCS write command
+					struct mipi_dsi_msg *msg)
- * @dsi: DSI device
- * @data: pointer to the command followed by parameters
- * @len: length of @data
- */
-ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, const void *data,
-			    size_t len)
 {
 	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+	if (!ops || !ops->transfer)
+		return -ENOSYS;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
+		msg->flags |= MIPI_DSI_MSG_USE_LPM;
+
+	return ops->transfer(dsi->host, msg);
+}
+
+/**
+ * mipi_dsi_packet_format_is_short - check if a packet is of the short format
+ * @type: MIPI DSI data type of the packet
+ *
+ * Return: true if the packet for the given data type is a short packet, false
+ * otherwise.
+ */
+bool mipi_dsi_packet_format_is_short(u8 type)
+{
+	switch (type) {
+	case MIPI_DSI_V_SYNC_START:
+	case MIPI_DSI_V_SYNC_END:
+	case MIPI_DSI_H_SYNC_START:
+	case MIPI_DSI_H_SYNC_END:
+	case MIPI_DSI_END_OF_TRANSMISSION:
+	case MIPI_DSI_COLOR_MODE_OFF:
+	case MIPI_DSI_COLOR_MODE_ON:
+	case MIPI_DSI_SHUTDOWN_PERIPHERAL:
+	case MIPI_DSI_TURN_ON_PERIPHERAL:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+	case MIPI_DSI_DCS_SHORT_WRITE:
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+	case MIPI_DSI_DCS_READ:
+	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+		return true;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL(mipi_dsi_packet_format_is_short);
+
+/**
+ * mipi_dsi_packet_format_is_long - check if a packet is of the long format
+ * @type: MIPI DSI data type of the packet
+ *
+ * Return: true if the packet for the given data type is a long packet, false
+ * otherwise.
+ */
+bool mipi_dsi_packet_format_is_long(u8 type)
+{
+	switch (type) {
+	case MIPI_DSI_NULL_PACKET:
+	case MIPI_DSI_BLANKING_PACKET:
+	case MIPI_DSI_GENERIC_LONG_WRITE:
+	case MIPI_DSI_DCS_LONG_WRITE:
+	case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_30:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_36:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_16:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_18:
+	case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_24:
+		return true;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL(mipi_dsi_packet_format_is_long);
+
+/**
+ * mipi_dsi_create_packet - create a packet from a message according to the
+ *     DSI protocol
+ * @packet: pointer to a DSI packet structure
+ * @msg: message to translate into a packet
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+			   const struct mipi_dsi_msg *msg)
+{
+	const u8 *tx = msg->tx_buf;
+
+	if (!packet || !msg)
+		return -EINVAL;
+
+	/* do some minimum sanity checking */
+	if (!mipi_dsi_packet_format_is_short(msg->type) &&
+	    !mipi_dsi_packet_format_is_long(msg->type))
+		return -EINVAL;
+
+	if (msg->channel > 3)
+		return -EINVAL;
+
+	memset(packet, 0, sizeof(*packet));
+	packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f);
+
+	/* TODO: compute ECC if hardware support is not available */
+
+	/*
+	 * Long write packets contain the word count in header bytes 1 and 2.
+	 * The payload follows the header and is word count bytes long.
+	 *
+	 * Short write packets encode up to two parameters in header bytes 1
+	 * and 2.
+	 */
+	if (mipi_dsi_packet_format_is_long(msg->type)) {
+		packet->header[1] = (msg->tx_len >> 0) & 0xff;
+		packet->header[2] = (msg->tx_len >> 8) & 0xff;
+
+		packet->payload_length = msg->tx_len;
+		packet->payload = tx;
+	} else {
+		packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0;
+		packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0;
+	}
+
+	packet->size = sizeof(packet->header) + packet->payload_length;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_create_packet);
+
+/*
+ * mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the
+ *    the payload in a long packet transmitted from the peripheral back to the
+ *    host processor
+ * @dsi: DSI peripheral device
+ * @value: the maximum size of the payload
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
+					    u16 value)
+{
+	u8 tx[2] = { value & 0xff, value >> 8 };
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
+		.tx_len = sizeof(tx),
+		.tx_buf = tx,
+	};
+
+	return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
+
+/**
+ * mipi_dsi_generic_write() - transmit data using a generic write packet
+ * @dsi: DSI peripheral device
+ * @payload: buffer containing the payload
+ * @size: size of payload buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the payload length.
+ *
+ * Return: The number of bytes transmitted on success or a negative error code
+ * on failure.
+ */
+ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
+			       size_t size)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.tx_buf = payload,
+		.tx_len = size
+	};
+
+	switch (size) {
+	case 0:
+		msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM;
+		break;
+
+	case 1:
+		msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM;
+		break;
+
+	case 2:
+		msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM;
+		break;
+
+	default:
+		msg.type = MIPI_DSI_GENERIC_LONG_WRITE;
+		break;
+	}
+
+	return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_generic_write);
+
+/**
+ * mipi_dsi_generic_read() - receive data using a generic read packet
+ * @dsi: DSI peripheral device
+ * @params: buffer containing the request parameters
+ * @num_params: number of request parameters
+ * @data: buffer in which to return the received data
+ * @size: size of receive buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the number of parameters passed in.
+ *
+ * Return: The number of bytes successfully read or a negative error code on
+ * failure.
+ */
+ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
+			      size_t num_params, void *data, size_t size)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.tx_len = num_params,
+		.tx_buf = params,
+		.rx_len = size,
+		.rx_buf = data
+	};
+
+	switch (num_params) {
+	case 0:
+		msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
+		break;
+
+	case 1:
+		msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
+		break;
+
+	case 2:
+		msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_generic_read);
+
+/**
+ * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
+ * @dsi: DSI peripheral device
+ * @data: buffer containing data to be transmitted
+ * @len: size of transmission buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+ *
+ * Return: The number of bytes successfully transmitted or a negative error
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+				  const void *data, size_t len)
+{
 	struct mipi_dsi_msg msg = {
 		.channel = dsi->channel,
 		.tx_buf = data,
 		.tx_len = len
 	};
 
-	if (!ops || !ops->transfer)
-		return -ENOSYS;
-
 	switch (len) {
 	case 0:
 		return -EINVAL;
+
 	case 1:
 		msg.type = MIPI_DSI_DCS_SHORT_WRITE;
 		break;
+
 	case 2:
 		msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
 		break;
+
 	default:
 		msg.type = MIPI_DSI_DCS_LONG_WRITE;
 		break;
 	}
 
-	if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
+	return mipi_dsi_device_transfer(dsi, &msg);
-		msg.flags = MIPI_DSI_MSG_USE_LPM;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
 
-	return ops->transfer(dsi->host, &msg);
+/**
+ * mipi_dsi_dcs_write() - send DCS write command
+ * @dsi: DSI peripheral device
+ * @cmd: DCS command
+ * @data: buffer containing the command payload
+ * @len: command payload length
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+ *
+ * Return: The number of bytes successfully transmitted or a negative error
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+			   const void *data, size_t len)
+{
+	ssize_t err;
+	size_t size;
+	u8 *tx;
+
+	if (len > 0) {
+		size = 1 + len;
+
+		tx = kmalloc(size, GFP_KERNEL);
+		if (!tx)
+			return -ENOMEM;
+
+		/* concatenate the DCS command byte and the payload */
+		tx[0] = cmd;
+		memcpy(&tx[1], data, len);
+	} else {
+		tx = &cmd;
+		size = 1;
+	}
+
+	err = mipi_dsi_dcs_write_buffer(dsi, tx, size);
+
+	if (len > 0)
+		kfree(tx);
+
+	return err;
 }
 EXPORT_SYMBOL(mipi_dsi_dcs_write);
 
 /**
- * mipi_dsi_dcs_read - send DCS read request command
+ * mipi_dsi_dcs_read() - send DCS read request command
- * @dsi: DSI device
+ * @dsi: DSI peripheral device
- * @cmd: DCS read command
+ * @cmd: DCS command
- * @data: pointer to read buffer
+ * @data: buffer in which to receive data
- * @len: length of @data
+ * @len: size of receive buffer
  *
- * Function returns number of read bytes or error code.
+ * Return: The number of bytes read or a negative error code on failure.
  */
 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
 			  size_t len)
 {
-	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
 	struct mipi_dsi_msg msg = {
 		.channel = dsi->channel,
 		.type = MIPI_DSI_DCS_READ,
@@ -260,16 +585,283 @@ ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
 		.rx_len = len
 	};
 
-	if (!ops || !ops->transfer)
+	return mipi_dsi_device_transfer(dsi, &msg);
-		return -ENOSYS;
-
-	if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
-		msg.flags = MIPI_DSI_MSG_USE_LPM;
-
-	return ops->transfer(dsi->host, &msg);
 }
 EXPORT_SYMBOL(mipi_dsi_dcs_read);
 
+/**
+ * mipi_dsi_dcs_nop() - send DCS nop packet
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_nop);
+
+/**
+ * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset);
+
+/**
+ * mipi_dsi_dcs_get_power_mode() - query the display module's current power
+ *    mode
+ * @dsi: DSI peripheral device
+ * @mode: return location for the current power mode
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode,
+				sizeof(*mode));
+	if (err <= 0) {
+		if (err == 0)
+			err = -ENODATA;
+
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode);
+
+/**
+ * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
+ *    data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: return location for the pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format,
+				sizeof(*format));
+	if (err <= 0) {
+		if (err == 0)
+			err = -ENODATA;
+
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format);
+
+/**
+ * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
+ *    display module except interface communication
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode);
+
+/**
+ * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
+ *    module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode);
+
+/**
+ * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
+ *    display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off);
+
+/**
+ * mipi_dsi_dcs_set_display_on() - start displaying the image data on the
+ *    display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
+
+/**
+ * mipi_dsi_dcs_set_column_address() - define the column extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first column of frame memory
+ * @end: last column of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end)
+{
+	u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload,
+				 sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address);
+
+/**
+ * mipi_dsi_dcs_set_page_address() - define the page extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first page of frame memory
+ * @end: last page of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end)
+{
+	u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload,
+				 sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address);
+
+/**
+ * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
+ *    output signal on the TE signal line
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off);
+
+/**
+ * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
+ *    output signal on the TE signal line.
+ * @dsi: DSI peripheral device
+ * @mode: the Tearing Effect Output Line mode
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+			     enum mipi_dsi_dcs_tear_mode mode)
+{
+	u8 value = mode;
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value,
+				 sizeof(value));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
+
+/**
+ * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
+ *    data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
+				 sizeof(format));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
+
 static int mipi_dsi_drv_probe(struct device *dev)
 {
 	struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
@@ -295,12 +887,18 @@ static void mipi_dsi_drv_shutdown(struct device *dev)
 }
 
 /**
- * mipi_dsi_driver_register - register a driver for DSI devices
+ * mipi_dsi_driver_register_full() - register a driver for DSI devices
  * @drv: DSI driver structure
+ * @owner: owner module
+ *
+ * Return: 0 on success or a negative error code on failure.
  */
-int mipi_dsi_driver_register(struct mipi_dsi_driver *drv)
+int mipi_dsi_driver_register_full(struct mipi_dsi_driver *drv,
+				  struct module *owner)
 {
 	drv->driver.bus = &mipi_dsi_bus_type;
+	drv->driver.owner = owner;
+
 	if (drv->probe)
 		drv->driver.probe = mipi_dsi_drv_probe;
 	if (drv->remove)
@@ -310,11 +908,13 @@ int mipi_dsi_driver_register(struct mipi_dsi_driver *drv)
 
 	return driver_register(&drv->driver);
 }
-EXPORT_SYMBOL(mipi_dsi_driver_register);
+EXPORT_SYMBOL(mipi_dsi_driver_register_full);
 
 /**
- * mipi_dsi_driver_unregister - unregister a driver for DSI devices
+ * mipi_dsi_driver_unregister() - unregister a driver for DSI devices
  * @drv: DSI driver structure
+ *
+ * Return: 0 on success or a negative error code on failure.
  */
 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *drv)
 {

drivers/gpu/drm/exynos/exynos_drm_dsi.c

@@ -1236,7 +1236,7 @@ static bool exynos_dsi_is_short_dsi_type(u8 type)
 }
 
 static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
-				       struct mipi_dsi_msg *msg)
+				        const struct mipi_dsi_msg *msg)
 {
 	struct exynos_dsi *dsi = host_to_dsi(host);
 	struct exynos_dsi_transfer xfer;

drivers/gpu/drm/panel/Kconfig

@@ -27,4 +27,17 @@ config DRM_PANEL_S6E8AA0
 	select DRM_MIPI_DSI
 	select VIDEOMODE_HELPERS
 
+config DRM_PANEL_SHARP_LQ101R1SX01
+	tristate "Sharp LQ101R1SX01 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for Sharp LQ101R1SX01
+	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
+	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called panel-sharp-lq101r1sx01.
+
 endmenu

drivers/gpu/drm/panel/Makefile

@@ -1,3 +1,4 @@
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
 obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
+obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o

drivers/gpu/drm/panel/panel-ld9040.c

@@ -145,7 +145,7 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len)
 	if (ctx->error < 0 || len == 0)
 		return;
 
-	dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", len, data);
+	dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data);
 	ret = ld9040_spi_write_word(ctx, *data);
 
 	while (!ret && --len) {
@@ -154,8 +154,8 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len)
 	}
 
 	if (ret) {
-		dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, len,
+		dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret,
-			data);
+			(int)len, data);
 		ctx->error = ret;
 	}
 
@@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset-gpios %ld\n",
 			PTR_ERR(ctx->reset_gpio));
 		return PTR_ERR(ctx->reset_gpio);
 	}
-	ret = gpiod_direction_output(ctx->reset_gpio, 1);
-	if (ret < 0) {
-		dev_err(dev, "cannot configure reset-gpios %d\n", ret);
-		return ret;
-	}
 
 	spi->bits_per_word = 9;
 	ret = spi_setup(spi);

drivers/gpu/drm/panel/panel-s6e8aa0.c

@@ -141,10 +141,10 @@ static void s6e8aa0_dcs_write(struct s6e8aa0 *ctx, const void *data, size_t len)
 	if (ctx->error < 0)
 		return;
 
-	ret = mipi_dsi_dcs_write(dsi, data, len);
+	ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
 	if (ret < 0) {
-		dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n", ret, len,
+		dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n", ret,
-			data);
+			(int)len, data);
 		ctx->error = ret;
 	}
 }
@@ -800,27 +800,15 @@ static void s6e8aa0_panel_init(struct s6e8aa0 *ctx)
 }
 
 static void s6e8aa0_set_maximum_return_packet_size(struct s6e8aa0 *ctx,
-						   int size)
+						   u16 size)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
-	u8 buf[] = {size, 0};
-	struct mipi_dsi_msg msg = {
-		.channel = dsi->channel,
-		.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
-		.tx_len = sizeof(buf),
-		.tx_buf = buf
-	};
 	int ret;
 
 	if (ctx->error < 0)
 		return;
 
-	if (!ops || !ops->transfer)
+	ret = mipi_dsi_set_maximum_return_packet_size(dsi, size);
-		ret = -EIO;
-	else
-		ret = ops->transfer(dsi->host, &msg);
-
 	if (ret < 0) {
 		dev_err(ctx->dev,
 			"error %d setting maximum return packet size to %d\n",
@@ -1019,17 +1007,12 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
 		return ret;
 	}
 
-	ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset-gpios %ld\n",
 			PTR_ERR(ctx->reset_gpio));
 		return PTR_ERR(ctx->reset_gpio);
 	}
-	ret = gpiod_direction_output(ctx->reset_gpio, 1);
-	if (ret < 0) {
-		dev_err(dev, "cannot configure reset-gpios %d\n", ret);
-		return ret;
-	}
 
 	ctx->brightness = GAMMA_LEVEL_NUM - 1;
 
@@ -1069,7 +1052,6 @@ static struct mipi_dsi_driver s6e8aa0_driver = {
 	.remove = s6e8aa0_remove,
 	.driver = {
 		.name = "panel_s6e8aa0",
-		.owner = THIS_MODULE,
 		.of_match_table = s6e8aa0_of_match,
 	},
 };

drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c

@@ -0,0 +1,464 @@
+/*
+ * Copyright (C) 2014 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+#include <linux/host1x.h>
+
+struct sharp_panel {
+	struct drm_panel base;
+	/* the datasheet refers to them as DSI-LINK1 and DSI-LINK2 */
+	struct mipi_dsi_device *link1;
+	struct mipi_dsi_device *link2;
+
+	struct backlight_device *backlight;
+	struct regulator *supply;
+
+	bool prepared;
+	bool enabled;
+
+	const struct drm_display_mode *mode;
+};
+
+static inline struct sharp_panel *to_sharp_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct sharp_panel, base);
+}
+
+static int sharp_panel_write(struct sharp_panel *sharp, u16 offset, u8 value)
+{
+	u8 payload[3] = { offset >> 8, offset & 0xff, value };
+	struct mipi_dsi_device *dsi = sharp->link1;
+	ssize_t err;
+
+	err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
+	if (err < 0) {
+		dev_err(&dsi->dev, "failed to write %02x to %04x: %zd\n",
+			value, offset, err);
+		return err;
+	}
+
+	err = mipi_dsi_dcs_nop(dsi);
+	if (err < 0) {
+		dev_err(&dsi->dev, "failed to send DCS nop: %zd\n", err);
+		return err;
+	}
+
+	usleep_range(10, 20);
+
+	return 0;
+}
+
+static __maybe_unused int sharp_panel_read(struct sharp_panel *sharp,
+					   u16 offset, u8 *value)
+{
+	ssize_t err;
+
+	cpu_to_be16s(&offset);
+
+	err = mipi_dsi_generic_read(sharp->link1, &offset, sizeof(offset),
+				    value, sizeof(*value));
+	if (err < 0)
+		dev_err(&sharp->link1->dev, "failed to read from %04x: %zd\n",
+			offset, err);
+
+	return err;
+}
+
+static int sharp_panel_disable(struct drm_panel *panel)
+{
+	struct sharp_panel *sharp = to_sharp_panel(panel);
+
+	if (!sharp->enabled)
+		return 0;
+
+	if (sharp->backlight) {
+		sharp->backlight->props.power = FB_BLANK_POWERDOWN;
+		backlight_update_status(sharp->backlight);
+	}
+
+	sharp->enabled = false;
+
+	return 0;
+}
+
+static int sharp_panel_unprepare(struct drm_panel *panel)
+{
+	struct sharp_panel *sharp = to_sharp_panel(panel);
+	int err;
+
+	if (!sharp->prepared)
+		return 0;
+
+	err = mipi_dsi_dcs_set_display_off(sharp->link1);
+	if (err < 0)
+		dev_err(panel->dev, "failed to set display off: %d\n", err);
+
+	err = mipi_dsi_dcs_enter_sleep_mode(sharp->link1);
+	if (err < 0)
+		dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
+
+	msleep(120);
+
+	regulator_disable(sharp->supply);
+
+	sharp->prepared = false;
+
+	return 0;
+}
+
+static int sharp_setup_symmetrical_split(struct mipi_dsi_device *left,
+					 struct mipi_dsi_device *right,
+					 const struct drm_display_mode *mode)
+{
+	int err;
+
+	err = mipi_dsi_dcs_set_column_address(left, 0, mode->hdisplay / 2 - 1);
+	if (err < 0) {
+		dev_err(&left->dev, "failed to set column address: %d\n", err);
+		return err;
+	}
+
+	err = mipi_dsi_dcs_set_page_address(left, 0, mode->vdisplay - 1);
+	if (err < 0) {
+		dev_err(&left->dev, "failed to set page address: %d\n", err);
+		return err;
+	}
+
+	err = mipi_dsi_dcs_set_column_address(right, mode->hdisplay / 2,
+					      mode->hdisplay - 1);
+	if (err < 0) {
+		dev_err(&right->dev, "failed to set column address: %d\n", err);
+		return err;
+	}
+
+	err = mipi_dsi_dcs_set_page_address(right, 0, mode->vdisplay - 1);
+	if (err < 0) {
+		dev_err(&right->dev, "failed to set page address: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int sharp_panel_prepare(struct drm_panel *panel)
+{
+	struct sharp_panel *sharp = to_sharp_panel(panel);
+	u8 format = MIPI_DCS_PIXEL_FMT_24BIT;
+	int err;
+
+	if (sharp->prepared)
+		return 0;
+
+	err = regulator_enable(sharp->supply);
+	if (err < 0)
+		return err;
+
+	usleep_range(10000, 20000);
+
+	err = mipi_dsi_dcs_soft_reset(sharp->link1);
+	if (err < 0) {
+		dev_err(panel->dev, "soft reset failed: %d\n", err);
+		goto poweroff;
+	}
+
+	msleep(120);
+
+	err = mipi_dsi_dcs_exit_sleep_mode(sharp->link1);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
+		goto poweroff;
+	}
+
+	/*
+	 * The MIPI DCS specification mandates this delay only between the
+	 * exit_sleep_mode and enter_sleep_mode commands, so it isn't strictly
+	 * necessary here.
+	 */
+	/*
+	msleep(120);
+	*/
+
+	/* set left-right mode */
+	err = sharp_panel_write(sharp, 0x1000, 0x2a);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to set left-right mode: %d\n", err);
+		goto poweroff;
+	}
+
+	/* enable command mode */
+	err = sharp_panel_write(sharp, 0x1001, 0x01);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to enable command mode: %d\n", err);
+		goto poweroff;
+	}
+
+	err = mipi_dsi_dcs_set_pixel_format(sharp->link1, format);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to set pixel format: %d\n", err);
+		goto poweroff;
+	}
+
+	/*
+	 * TODO: The device supports both left-right and even-odd split
+	 * configurations, but this driver currently supports only the left-
+	 * right split. To support a different mode a mechanism needs to be
+	 * put in place to communicate the configuration back to the DSI host
+	 * controller.
+	 */
+	err = sharp_setup_symmetrical_split(sharp->link1, sharp->link2,
+					    sharp->mode);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to set up symmetrical split: %d\n",
+			err);
+		goto poweroff;
+	}
+
+	err = mipi_dsi_dcs_set_display_on(sharp->link1);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to set display on: %d\n", err);
+		goto poweroff;
+	}
+
+	sharp->prepared = true;
+
+	return 0;
+
+poweroff:
+	regulator_disable(sharp->supply);
+	return err;
+}
+
+static int sharp_panel_enable(struct drm_panel *panel)
+{
+	struct sharp_panel *sharp = to_sharp_panel(panel);
+
+	if (sharp->enabled)
+		return 0;
+
+	if (sharp->backlight) {
+		sharp->backlight->props.power = FB_BLANK_UNBLANK;
+		backlight_update_status(sharp->backlight);
+	}
+
+	sharp->enabled = true;
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+	.clock = 278000,
+	.hdisplay = 2560,
+	.hsync_start = 2560 + 128,
+	.hsync_end = 2560 + 128 + 64,
+	.htotal = 2560 + 128 + 64 + 64,
+	.vdisplay = 1600,
+	.vsync_start = 1600 + 4,
+	.vsync_end = 1600 + 4 + 8,
+	.vtotal = 1600 + 4 + 8 + 32,
+	.vrefresh = 60,
+};
+
+static int sharp_panel_get_modes(struct drm_panel *panel)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = 217;
+	panel->connector->display_info.height_mm = 136;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs sharp_panel_funcs = {
+	.disable = sharp_panel_disable,
+	.unprepare = sharp_panel_unprepare,
+	.prepare = sharp_panel_prepare,
+	.enable = sharp_panel_enable,
+	.get_modes = sharp_panel_get_modes,
+};
+
+static const struct of_device_id sharp_of_match[] = {
+	{ .compatible = "sharp,lq101r1sx01", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sharp_of_match);
+
+static int sharp_panel_add(struct sharp_panel *sharp)
+{
+	struct device_node *np;
+	int err;
+
+	sharp->mode = &default_mode;
+
+	sharp->supply = devm_regulator_get(&sharp->link1->dev, "power");
+	if (IS_ERR(sharp->supply))
+		return PTR_ERR(sharp->supply);
+
+	np = of_parse_phandle(sharp->link1->dev.of_node, "backlight", 0);
+	if (np) {
+		sharp->backlight = of_find_backlight_by_node(np);
+		of_node_put(np);
+
+		if (!sharp->backlight)
+			return -EPROBE_DEFER;
+	}
+
+	drm_panel_init(&sharp->base);
+	sharp->base.funcs = &sharp_panel_funcs;
+	sharp->base.dev = &sharp->link1->dev;
+
+	err = drm_panel_add(&sharp->base);
+	if (err < 0)
+		goto put_backlight;
+
+	return 0;
+
+put_backlight:
+	if (sharp->backlight)
+		put_device(&sharp->backlight->dev);
+
+	return err;
+}
+
+static void sharp_panel_del(struct sharp_panel *sharp)
+{
+	if (sharp->base.dev)
+		drm_panel_remove(&sharp->base);
+
+	if (sharp->backlight)
+		put_device(&sharp->backlight->dev);
+
+	if (sharp->link2)
+		put_device(&sharp->link2->dev);
+}
+
+static int sharp_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct mipi_dsi_device *secondary = NULL;
+	struct sharp_panel *sharp;
+	struct device_node *np;
+	int err;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_LPM;
+
+	/* Find DSI-LINK1 */
+	np = of_parse_phandle(dsi->dev.of_node, "link2", 0);
+	if (np) {
+		secondary = of_find_mipi_dsi_device_by_node(np);
+		of_node_put(np);
+
+		if (!secondary)
+			return -EPROBE_DEFER;
+	}
+
+	/* register a panel for only the DSI-LINK1 interface */
+	if (secondary) {
+		sharp = devm_kzalloc(&dsi->dev, sizeof(*sharp), GFP_KERNEL);
+		if (!sharp) {
+			put_device(&secondary->dev);
+			return -ENOMEM;
+		}
+
+		mipi_dsi_set_drvdata(dsi, sharp);
+
+		sharp->link2 = secondary;
+		sharp->link1 = dsi;
+
+		err = sharp_panel_add(sharp);
+		if (err < 0) {
+			put_device(&secondary->dev);
+			return err;
+		}
+	}
+
+	err = mipi_dsi_attach(dsi);
+	if (err < 0) {
+		if (secondary)
+			sharp_panel_del(sharp);
+
+		return err;
+	}
+
+	return 0;
+}
+
+static int sharp_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
+	int err;
+
+	/* only detach from host for the DSI-LINK2 interface */
+	if (!sharp) {
+		mipi_dsi_detach(dsi);
+		return 0;
+	}
+
+	err = sharp_panel_disable(&sharp->base);
+	if (err < 0)
+		dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
+
+	err = mipi_dsi_detach(dsi);
+	if (err < 0)
+		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
+
+	drm_panel_detach(&sharp->base);
+	sharp_panel_del(sharp);
+
+	return 0;
+}
+
+static void sharp_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
+
+	/* nothing to do for DSI-LINK2 */
+	if (!sharp)
+		return;
+
+	sharp_panel_disable(&sharp->base);
+}
+
+static struct mipi_dsi_driver sharp_panel_driver = {
+	.driver = {
+		.name = "panel-sharp-lq101r1sx01",
+		.of_match_table = sharp_of_match,
+	},
+	.probe = sharp_panel_probe,
+	.remove = sharp_panel_remove,
+	.shutdown = sharp_panel_shutdown,
+};
+module_mipi_dsi_driver(sharp_panel_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("Sharp LQ101R1SX01 panel driver");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/panel/panel-simple.c

@@ -247,21 +247,14 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 	if (IS_ERR(panel->supply))
 		return PTR_ERR(panel->supply);
 
-	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable");
+	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
+						     GPIOD_OUT_LOW);
 	if (IS_ERR(panel->enable_gpio)) {
 		err = PTR_ERR(panel->enable_gpio);
 		dev_err(dev, "failed to request GPIO: %d\n", err);
 		return err;
 	}
 
-	if (panel->enable_gpio) {
-		err = gpiod_direction_output(panel->enable_gpio, 0);
-		if (err < 0) {
-			dev_err(dev, "failed to setup GPIO: %d\n", err);
-			return err;
-		}
-	}
-
 	backlight = of_parse_phandle(dev->of_node, "backlight", 0);
 	if (backlight) {
 		panel->backlight = of_find_backlight_by_node(backlight);
@@ -376,6 +369,29 @@ static const struct panel_desc auo_b101xtn01 = {
 	},
 };
 
+static const struct drm_display_mode auo_b116xw03_mode = {
+	.clock = 70589,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 40,
+	.hsync_end = 1366 + 40 + 40,
+	.htotal = 1366 + 40 + 40 + 32,
+	.vdisplay = 768,
+	.vsync_start = 768 + 10,
+	.vsync_end = 768 + 10 + 12,
+	.vtotal = 768 + 10 + 12 + 6,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc auo_b116xw03 = {
+	.modes = &auo_b116xw03_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+};
+
 static const struct drm_display_mode auo_b133xtn01_mode = {
 	.clock = 69500,
 	.hdisplay = 1366,
@@ -415,6 +431,7 @@ static const struct drm_display_mode auo_b133htn01_mode = {
 static const struct panel_desc auo_b133htn01 = {
 	.modes = &auo_b133htn01_mode,
 	.num_modes = 1,
+	.bpc = 6,
 	.size = {
 		.width = 293,
 		.height = 165,
@@ -536,22 +553,92 @@ static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = {
 static const struct panel_desc foxlink_fl500wvr00_a0t = {
 	.modes = &foxlink_fl500wvr00_a0t_mode,
 	.num_modes = 1,
+	.bpc = 8,
 	.size = {
 		.width = 108,
 		.height = 65,
 	},
 };
 
-static const struct drm_display_mode innolux_n116bge_mode = {
+static const struct drm_display_mode hannstar_hsd070pww1_mode = {
+	.clock = 71100,
+	.hdisplay = 1280,
+	.hsync_start = 1280 + 1,
+	.hsync_end = 1280 + 1 + 158,
+	.htotal = 1280 + 1 + 158 + 1,
+	.vdisplay = 800,
+	.vsync_start = 800 + 1,
+	.vsync_end = 800 + 1 + 21,
+	.vtotal = 800 + 1 + 21 + 1,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc hannstar_hsd070pww1 = {
+	.modes = &hannstar_hsd070pww1_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 151,
+		.height = 94,
+	},
+};
+
+static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = {
+	.clock = 33333,
+	.hdisplay = 800,
+	.hsync_start = 800 + 85,
+	.hsync_end = 800 + 85 + 86,
+	.htotal = 800 + 85 + 86 + 85,
+	.vdisplay = 480,
+	.vsync_start = 480 + 16,
+	.vsync_end = 480 + 16 + 13,
+	.vtotal = 480 + 16 + 13 + 16,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc hitachi_tx23d38vm0caa = {
+	.modes = &hitachi_tx23d38vm0caa_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 195,
+		.height = 117,
+	},
+};
+
+static const struct drm_display_mode innolux_g121i1_l01_mode = {
 	.clock = 71000,
+	.hdisplay = 1280,
+	.hsync_start = 1280 + 64,
+	.hsync_end = 1280 + 64 + 32,
+	.htotal = 1280 + 64 + 32 + 64,
+	.vdisplay = 800,
+	.vsync_start = 800 + 9,
+	.vsync_end = 800 + 9 + 6,
+	.vtotal = 800 + 9 + 6 + 9,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc innolux_g121i1_l01 = {
+	.modes = &innolux_g121i1_l01_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 261,
+		.height = 163,
+	},
+};
+
+static const struct drm_display_mode innolux_n116bge_mode = {
+	.clock = 76420,
 	.hdisplay = 1366,
-	.hsync_start = 1366 + 64,
+	.hsync_start = 1366 + 136,
-	.hsync_end = 1366 + 64 + 6,
+	.hsync_end = 1366 + 136 + 30,
-	.htotal = 1366 + 64 + 6 + 64,
+	.htotal = 1366 + 136 + 30 + 60,
 	.vdisplay = 768,
 	.vsync_start = 768 + 8,
-	.vsync_end = 768 + 8 + 4,
+	.vsync_end = 768 + 8 + 12,
-	.vtotal = 768 + 8 + 4 + 8,
+	.vtotal = 768 + 8 + 12 + 12,
 	.vrefresh = 60,
 	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
 };
@@ -642,6 +729,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "auo,b101xtn01",
 		.data = &auo_b101xtn01,
+	}, {
+		.compatible = "auo,b116xw03",
+		.data = &auo_b116xw03,
 	}, {
 		.compatible = "auo,b133htn01",
 		.data = &auo_b133htn01,
@@ -666,6 +756,15 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "foxlink,fl500wvr00-a0t",
 		.data = &foxlink_fl500wvr00_a0t,
+	}, {
+		.compatible = "hannstar,hsd070pww1",
+		.data = &hannstar_hsd070pww1,
+	}, {
+		.compatible = "hit,tx23d38vm0caa",
+		.data = &hitachi_tx23d38vm0caa
+	}, {
+		.compatible ="innolux,g121i1-l01",
+		.data = &innolux_g121i1_l01
 	}, {
 		.compatible = "innolux,n116bge",
 		.data = &innolux_n116bge,
@@ -741,6 +840,7 @@ static const struct panel_desc_dsi lg_ld070wx3_sl01 = {
 	.desc = {
 		.modes = &lg_ld070wx3_sl01_mode,
 		.num_modes = 1,
+		.bpc = 8,
 		.size = {
 			.width = 94,
 			.height = 151,
@@ -768,6 +868,7 @@ static const struct panel_desc_dsi lg_lh500wx1_sd03 = {
 	.desc = {
 		.modes = &lg_lh500wx1_sd03_mode,
 		.num_modes = 1,
+		.bpc = 8,
 		.size = {
 			.width = 62,
 			.height = 110,
@@ -795,6 +896,7 @@ static const struct panel_desc_dsi panasonic_vvx10f004b00 = {
 	.desc = {
 		.modes = &panasonic_vvx10f004b00_mode,
 		.num_modes = 1,
+		.bpc = 8,
 		.size = {
 			.width = 217,
 			.height = 136,
@@ -864,7 +966,6 @@ static void panel_simple_dsi_shutdown(struct mipi_dsi_device *dsi)
 static struct mipi_dsi_driver panel_simple_dsi_driver = {
 	.driver = {
 		.name = "panel-simple-dsi",
-		.owner = THIS_MODULE,
 		.of_match_table = dsi_of_match,
 	},
 	.probe = panel_simple_dsi_probe,

include/drm/drm_mipi_dsi.h

@@ -26,6 +26,7 @@ struct mipi_dsi_device;
  * struct mipi_dsi_msg - read/write DSI buffer
  * @channel: virtual channel id
  * @type: payload data type
+ * @flags: flags controlling this message transmission
  * @tx_len: length of @tx_buf
  * @tx_buf: data to be written
  * @rx_len: length of @rx_buf
@@ -43,12 +44,44 @@ struct mipi_dsi_msg {
 	void *rx_buf;
 };
 
+bool mipi_dsi_packet_format_is_short(u8 type);
+bool mipi_dsi_packet_format_is_long(u8 type);
+
+/**
+ * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
+ * @size: size (in bytes) of the packet
+ * @header: the four bytes that make up the header (Data ID, Word Count or
+ *     Packet Data, and ECC)
+ * @payload_length: number of bytes in the payload
+ * @payload: a pointer to a buffer containing the payload, if any
+ */
+struct mipi_dsi_packet {
+	size_t size;
+	u8 header[4];
+	size_t payload_length;
+	const u8 *payload;
+};
+
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+			   const struct mipi_dsi_msg *msg);
+
 /**
  * struct mipi_dsi_host_ops - DSI bus operations
  * @attach: attach DSI device to DSI host
  * @detach: detach DSI device from DSI host
- * @transfer: send and/or receive DSI packet, return number of received bytes,
+ * @transfer: transmit a DSI packet
- * 	      or error
+ *
+ * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
+ * structures. This structure contains information about the type of packet
+ * being transmitted as well as the transmit and receive buffers. When an
+ * error is encountered during transmission, this function will return a
+ * negative error code. On success it shall return the number of bytes
+ * transmitted for write packets or the number of bytes received for read
+ * packets.
+ *
+ * Note that typically DSI packet transmission is atomic, so the .transfer()
+ * function will seldomly return anything other than the number of bytes
+ * contained in the transmit buffer on success.
  */
 struct mipi_dsi_host_ops {
 	int (*attach)(struct mipi_dsi_host *host,
@@ -56,7 +89,7 @@ struct mipi_dsi_host_ops {
 	int (*detach)(struct mipi_dsi_host *host,
 		      struct mipi_dsi_device *dsi);
 	ssize_t (*transfer)(struct mipi_dsi_host *host,
-			    struct mipi_dsi_msg *msg);
+			    const struct mipi_dsi_msg *msg);
 };
 
 /**
@@ -130,12 +163,57 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
 	return container_of(dev, struct mipi_dsi_device, dev);
 }
 
+struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
-ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, const void *data,
+int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
-			    size_t len);
+					    u16 value);
+
+ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
+			       size_t size);
+ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
+			      size_t num_params, void *data, size_t size);
+
+/**
+ * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
+ * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
+ *    information only
+ * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
+ *    V-Blanking and H-Blanking information
+ */
+enum mipi_dsi_dcs_tear_mode {
+	MIPI_DSI_DCS_TEAR_MODE_VBLANK,
+	MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
+};
+
+#define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
+#define MIPI_DSI_DCS_POWER_MODE_NORMAL  (1 << 3)
+#define MIPI_DSI_DCS_POWER_MODE_SLEEP   (1 << 4)
+#define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
+#define MIPI_DSI_DCS_POWER_MODE_IDLE    (1 << 6)
+
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+				  const void *data, size_t len);
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+			   const void *data, size_t len);
 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
 			  size_t len);
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end);
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end);
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+			     enum mipi_dsi_dcs_tear_mode mode);
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
 
 /**
  * struct mipi_dsi_driver - DSI driver
@@ -167,9 +245,13 @@ static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
 	dev_set_drvdata(&dsi->dev, data);
 }
 
-int mipi_dsi_driver_register(struct mipi_dsi_driver *driver);
+int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
+				  struct module *owner);
 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
 
+#define mipi_dsi_driver_register(driver) \
+	mipi_dsi_driver_register_full(driver, THIS_MODULE)
+
 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
 	module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
 			mipi_dsi_driver_unregister)