mirror of https://gitee.com/openkylin/linux.git
i2c-au1550: Convert to platform driver
Convert the i2c-au1550 bus driver to platform driver, and register a platform device for the Alchemy Db/Pb series of boards. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Manuel Lauss
Jean Delvare
parent
91f27958d6
commit
8b798c4d16
|
|
@ -270,6 +270,24 @@ static struct platform_device smc91x_device = {
|
|||
|
||||
#endif
|
||||
|
||||
/* All Alchemy demoboards with I2C have this #define in their headers */
|
||||
#ifdef SMBUS_PSC_BASE
|
||||
static struct resource pbdb_smbus_resources[] = {
|
||||
{
|
||||
.start = SMBUS_PSC_BASE,
|
||||
.end = SMBUS_PSC_BASE + 0x24 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device pbdb_smbus_device = {
|
||||
.name = "au1xpsc_smbus",
|
||||
.id = 0, /* bus number */
|
||||
.num_resources = ARRAY_SIZE(pbdb_smbus_resources),
|
||||
.resource = pbdb_smbus_resources,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct platform_device *au1xxx_platform_devices[] __initdata = {
|
||||
&au1xxx_usb_ohci_device,
|
||||
&au1x00_pcmcia_device,
|
||||
|
|
@ -287,6 +305,9 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
|
|||
#ifdef CONFIG_MIPS_DB1200
|
||||
&smc91x_device,
|
||||
#endif
|
||||
#ifdef SMBUS_PSC_BASE
|
||||
&pbdb_smbus_device,
|
||||
#endif
|
||||
};
|
||||
|
||||
int __init au1xxx_platform_init(void)
|
||||
|
|
|
|||
|
|
@ -30,14 +30,22 @@
|
|||
#include <linux/delay.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <asm/mach-au1x00/au1xxx.h>
|
||||
#include <asm/mach-au1x00/au1xxx_psc.h>
|
||||
|
||||
#include "i2c-au1550.h"
|
||||
struct i2c_au1550_data {
|
||||
u32 psc_base;
|
||||
int xfer_timeout;
|
||||
int ack_timeout;
|
||||
struct i2c_adapter adap;
|
||||
struct resource *ioarea;
|
||||
};
|
||||
|
||||
static int
|
||||
wait_xfer_done(struct i2c_au1550_data *adap)
|
||||
|
|
@ -299,18 +307,48 @@ static const struct i2c_algorithm au1550_algo = {
|
|||
* Prior to calling us, the 50MHz clock frequency and routing
|
||||
* must have been set up for the PSC indicated by the adapter.
|
||||
*/
|
||||
int
|
||||
i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
|
||||
static int __devinit
|
||||
i2c_au1550_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct i2c_au1550_data *adap = i2c_adap->algo_data;
|
||||
volatile psc_smb_t *sp;
|
||||
u32 stat;
|
||||
struct i2c_au1550_data *priv;
|
||||
volatile psc_smb_t *sp;
|
||||
struct resource *r;
|
||||
u32 stat;
|
||||
int ret;
|
||||
|
||||
i2c_adap->algo = &au1550_algo;
|
||||
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!r) {
|
||||
ret = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
|
||||
priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL);
|
||||
if (!priv) {
|
||||
ret = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
|
||||
priv->ioarea = request_mem_region(r->start, r->end - r->start + 1,
|
||||
pdev->name);
|
||||
if (!priv->ioarea) {
|
||||
ret = -EBUSY;
|
||||
goto out_mem;
|
||||
}
|
||||
|
||||
priv->psc_base = r->start;
|
||||
priv->xfer_timeout = 200;
|
||||
priv->ack_timeout = 200;
|
||||
|
||||
priv->adap.id = I2C_HW_AU1550_PSC;
|
||||
priv->adap.nr = pdev->id;
|
||||
priv->adap.algo = &au1550_algo;
|
||||
priv->adap.algo_data = priv;
|
||||
priv->adap.dev.parent = &pdev->dev;
|
||||
strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
|
||||
|
||||
/* Now, set up the PSC for SMBus PIO mode.
|
||||
*/
|
||||
sp = (volatile psc_smb_t *)(adap->psc_base);
|
||||
sp = (volatile psc_smb_t *)priv->psc_base;
|
||||
sp->psc_ctrl = PSC_CTRL_DISABLE;
|
||||
au_sync();
|
||||
sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
|
||||
|
|
@ -348,87 +386,87 @@ i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
|
|||
au_sync();
|
||||
} while ((stat & PSC_SMBSTAT_DR) == 0);
|
||||
|
||||
return i2c_add_adapter(i2c_adap);
|
||||
ret = i2c_add_numbered_adapter(&priv->adap);
|
||||
if (ret == 0) {
|
||||
platform_set_drvdata(pdev, priv);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* disable the PSC */
|
||||
sp->psc_smbcfg = 0;
|
||||
sp->psc_ctrl = PSC_CTRL_DISABLE;
|
||||
au_sync();
|
||||
|
||||
release_resource(priv->ioarea);
|
||||
kfree(priv->ioarea);
|
||||
out_mem:
|
||||
kfree(priv);
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
int
|
||||
i2c_au1550_del_bus(struct i2c_adapter *adap)
|
||||
static int __devexit
|
||||
i2c_au1550_remove(struct platform_device *pdev)
|
||||
{
|
||||
return i2c_del_adapter(adap);
|
||||
}
|
||||
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
|
||||
volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
|
||||
|
||||
static int
|
||||
pb1550_reg(struct i2c_client *client)
|
||||
{
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
i2c_del_adapter(&priv->adap);
|
||||
sp->psc_smbcfg = 0;
|
||||
sp->psc_ctrl = PSC_CTRL_DISABLE;
|
||||
au_sync();
|
||||
release_resource(priv->ioarea);
|
||||
kfree(priv->ioarea);
|
||||
kfree(priv);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
pb1550_unreg(struct i2c_client *client)
|
||||
i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
|
||||
{
|
||||
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
|
||||
volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
|
||||
|
||||
sp->psc_ctrl = PSC_CTRL_SUSPEND;
|
||||
au_sync();
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_au1550_data pb1550_i2c_info = {
|
||||
SMBUS_PSC_BASE, 200, 200
|
||||
};
|
||||
|
||||
static struct i2c_adapter pb1550_board_adapter = {
|
||||
name: "pb1550 adapter",
|
||||
id: I2C_HW_AU1550_PSC,
|
||||
algo: NULL,
|
||||
algo_data: &pb1550_i2c_info,
|
||||
client_register: pb1550_reg,
|
||||
client_unregister: pb1550_unreg,
|
||||
};
|
||||
|
||||
/* BIG hack to support the control interface on the Wolfson WM8731
|
||||
* audio codec on the Pb1550 board. We get an address and two data
|
||||
* bytes to write, create an i2c message, and send it across the
|
||||
* i2c transfer function. We do this here because we have access to
|
||||
* the i2c adapter structure.
|
||||
*/
|
||||
static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */
|
||||
static u8 i2cbuf[2];
|
||||
|
||||
int
|
||||
pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
|
||||
static int
|
||||
i2c_au1550_resume(struct platform_device *pdev)
|
||||
{
|
||||
wm_i2c_msg.addr = addr;
|
||||
wm_i2c_msg.flags = 0;
|
||||
wm_i2c_msg.buf = i2cbuf;
|
||||
wm_i2c_msg.len = 2;
|
||||
i2cbuf[0] = reg;
|
||||
i2cbuf[1] = val;
|
||||
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
|
||||
volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
|
||||
|
||||
return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
|
||||
sp->psc_ctrl = PSC_CTRL_ENABLE;
|
||||
au_sync();
|
||||
while (!(sp->psc_smbstat & PSC_SMBSTAT_SR))
|
||||
au_sync();
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver au1xpsc_smbus_driver = {
|
||||
.driver = {
|
||||
.name = "au1xpsc_smbus",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = i2c_au1550_probe,
|
||||
.remove = __devexit_p(i2c_au1550_remove),
|
||||
.suspend = i2c_au1550_suspend,
|
||||
.resume = i2c_au1550_resume,
|
||||
};
|
||||
|
||||
static int __init
|
||||
i2c_au1550_init(void)
|
||||
{
|
||||
printk(KERN_INFO "Au1550 I2C: ");
|
||||
|
||||
/* This is where we would set up a 50MHz clock source
|
||||
* and routing. On the Pb1550, the SMBus is PSC2, which
|
||||
* uses a shared clock with USB. This has been already
|
||||
* configured by Yamon as a 48MHz clock, close enough
|
||||
* for our work.
|
||||
*/
|
||||
if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) {
|
||||
printk("failed to initialize.\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
printk("initialized.\n");
|
||||
return 0;
|
||||
return platform_driver_register(&au1xpsc_smbus_driver);
|
||||
}
|
||||
|
||||
static void __exit
|
||||
i2c_au1550_exit(void)
|
||||
{
|
||||
i2c_au1550_del_bus(&pb1550_board_adapter);
|
||||
platform_driver_unregister(&au1xpsc_smbus_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
|
||||
|
|
|
|||
|
|
@ -1,32 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
|
||||
* 2.6 port by Matt Porter <mporter@kernel.crashing.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#ifndef I2C_AU1550_H
|
||||
#define I2C_AU1550_H
|
||||
|
||||
struct i2c_au1550_data {
|
||||
u32 psc_base;
|
||||
int xfer_timeout;
|
||||
int ack_timeout;
|
||||
};
|
||||
|
||||
int i2c_au1550_add_bus(struct i2c_adapter *);
|
||||
int i2c_au1550_del_bus(struct i2c_adapter *);
|
||||
|
||||
#endif /* I2C_AU1550_H */
|
||||
Loading…
Reference in New Issue