mirror of https://gitee.com/openkylin/linux.git
ARM: dts: Add initial Pistachio i.mx6q board support.
Working items: - 800MHz CPU - 2GB of RAM (DDR3) - 4GB of eMMC storage - 1T1R WiFi 2.4 GHz - Power management support - 1x 10/100/1000 Mbps Ethernet WAN port - 2x USB 2.0 Host - PCIe - HDMI/VGA/LVDS display - 1x UART for RS232/422/485 - 2x UART for RS232 - 1x UART for serial console - 1x CAN bus Specification: http://nutsboard.org/pistachio Signed-off-by: YuanCheng Cheng <onlywig@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
YuanCheng Cheng
Shawn Guo
parent
72f75bced5
commit
8bd6071143
|
|
@ -435,6 +435,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|||
imx6q-nitrogen6_som2.dtb \
|
||||
imx6q-novena.dtb \
|
||||
imx6q-phytec-pbab01.dtb \
|
||||
imx6q-pistachio.dtb \
|
||||
imx6q-rex-pro.dtb \
|
||||
imx6q-sabreauto.dtb \
|
||||
imx6q-sabrelite.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,693 @@
|
|||
/*
|
||||
* Copyright (C) 2017 NutsBoard.Org
|
||||
*
|
||||
* Author: Wig Cheng <onlywig@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NutsBoard i.MX6 Quad Pistachio board";
|
||||
compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart4;
|
||||
};
|
||||
|
||||
memory: memory {
|
||||
reg = <0x10000000 0x80000000>;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1P8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
wlan_en_reg: regulator-wlan_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wlan-en-regulator";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator-usb_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <&swbst_reg>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_keys>;
|
||||
|
||||
power {
|
||||
label = "Power Button";
|
||||
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup;
|
||||
linux,code = <KEY_POWER>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx-sgtl5000",
|
||||
"fsl,imx-audio-sgtl5000";
|
||||
model = "audio-sgtl5000";
|
||||
ssi-controller = <&ssi1>;
|
||||
audio-codec = <&codec>;
|
||||
audio-routing =
|
||||
"MIC_IN", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"Headphone Jack", "HP_OUT";
|
||||
mux-int-port = <1>;
|
||||
mux-ext-port = <3>;
|
||||
};
|
||||
|
||||
backlight_lvds: backlight-lvds {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 50000>;
|
||||
brightness-levels = <
|
||||
0 /*1 2 3 4 5 6*/ 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100
|
||||
>;
|
||||
default-brightness-level = <94>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "hannstar,hsd100pxn1";
|
||||
backlight = <&backlight_lvds>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flexcan2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&clks {
|
||||
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
||||
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
|
||||
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
||||
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rgmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
codec: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
|
||||
reg = <0x0a>;
|
||||
clocks = <&clks IMX6QDL_CLK_CKO>;
|
||||
VDDA-supply = <®_1p8v>;
|
||||
VDDIO-supply = <®_1p8v>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
pmic: pfuze100@08 {
|
||||
compatible = "fsl,pfuze100";
|
||||
reg = <0x08>;
|
||||
|
||||
regulators {
|
||||
sw1a_reg: sw1ab {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw1c_reg: sw1c {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw3a_reg: sw3a {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3b_reg: sw3b {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw4_reg: sw4 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
swbst_reg: swbst {
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5150000>;
|
||||
};
|
||||
|
||||
snvs_reg: vsnvs {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vref_reg: vrefddr {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen1_reg: vgen1 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen2_reg: vgen2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen3_reg: vgen3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vgen4_reg: vgen4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen5_reg: vgen5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
vgen6_reg: vgen6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ar1021@4d {
|
||||
compatible = "microchip,ar1021-i2c";
|
||||
reg = <0x4d>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /*pcie power*/
|
||||
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /*LCD power*/
|
||||
MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /*backlight power*/
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 /*SD3 CD pin*/
|
||||
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /*codec power*/
|
||||
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /*touch reset*/
|
||||
MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b01 /*touch irq*/
|
||||
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0/*backlight pwr*/
|
||||
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /*gpio 5V_1*/
|
||||
MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 /*gpio 5V_2*/
|
||||
MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /*gpio 5V_3*/
|
||||
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /*gpio 5V_4*/
|
||||
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 /*AUX_5V_EN*/
|
||||
MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 /*AUX_5VB_EN*/
|
||||
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 /*AUX_3V3_EN*/
|
||||
MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /*I2C expander pwr*/
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_audmux: audmuxgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
||||
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi1: ecspi1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
|
||||
MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
|
||||
MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
|
||||
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
/* AR8035 reset */
|
||||
MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x130b0
|
||||
/* AR8035 interrupt */
|
||||
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
||||
/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
|
||||
/* AR8035 pin strapping: IO voltage: pull up */
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
||||
/* AR8035 pin strapping: PHYADDR#0: pull down */
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
|
||||
/* AR8035 pin strapping: PHYADDR#1: pull down */
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
|
||||
/* AR8035 pin strapping: MODE#1: pull up */
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
||||
/* AR8035 pin strapping: MODE#3: pull up */
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
||||
/* AR8035 pin strapping: MODE#0: pull down */
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_flexcan2: flexcan2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
|
||||
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_keys: gpio_keysgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_hdmi_cec: hdmicecgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
|
||||
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 /* sys_mclk */
|
||||
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x130b0 /*headphone det*/
|
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 /*microphone det*/
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
|
||||
MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
|
||||
MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart5: uart5grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x15059 /*BT_EN*/
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
|
||||
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
|
||||
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
|
||||
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
|
||||
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
|
||||
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
|
||||
MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059
|
||||
MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059
|
||||
MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059
|
||||
MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
||||
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x15059 /*WL_EN_LDO*/
|
||||
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x15059 /*WL_EN*/
|
||||
MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x15059 /*WL_IRQ*/
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b00
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds-channel@1 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&snvs_poweroff {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
uart-has-rtscts;
|
||||
fsl,dte-mode;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart5>;
|
||||
fsl,uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
disable-over-current;
|
||||
srp-disable;
|
||||
hnp-disable;
|
||||
adp-disable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy1 {
|
||||
fsl,tx-d-cal = <0x5>;
|
||||
};
|
||||
|
||||
&usbphy2 {
|
||||
fsl,tx-d-cal = <0x5>;
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
bus-width = <8>;
|
||||
keep-power-in-suspend;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&wlan_en_reg>;
|
||||
no-1-8-v;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
cap-power-off-card;
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1835";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio5>;
|
||||
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ref-clock-frequency = <38400000>;
|
||||
tcxo-clock-frequency = <26000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
keep-power-in-suspend;
|
||||
wakeup-source;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue