mirror of https://gitee.com/openkylin/linux.git
bus: Add Baikal-T1 APB-bus driver
Baikal-T1 AXI-APB bridge is used to access the SoC subsystem CSRs. IO requests are routed to this bus by means of the DW AMBA 3 AXI Interconnect. In case if an attempted APB transaction stays with no response for a pre-defined time an interrupt occurs and the bus gets freed for a next operation. This driver provides the interrupt handler to detect the erroneous address, prints an error message about the address fault, updates an errors counter. The counter and the APB-bus operations timeout can be accessed via corresponding sysfs nodes. A dedicated sysfs-node can be also used to artificially cause the bus errors described above. [arnd: fix build warnings for missing includes and wrong return types] Link: https://lore.kernel.org/r/20200526125928.17096-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Paul Burton <paulburton@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Serge Semin
Arnd Bergmann
parent
63cb77136e
commit
8f93662d83
|
|
@ -29,6 +29,21 @@ config BRCMSTB_GISB_ARB
|
||||||
arbiter. This driver provides timeout and target abort error handling
|
arbiter. This driver provides timeout and target abort error handling
|
||||||
and internal bus master decoding.
|
and internal bus master decoding.
|
||||||
|
|
||||||
|
config BT1_APB
|
||||||
|
tristate "Baikal-T1 APB-bus driver"
|
||||||
|
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
|
||||||
|
select REGMAP_MMIO
|
||||||
|
help
|
||||||
|
Baikal-T1 AXI-APB bridge is used to access the SoC subsystem CSRs.
|
||||||
|
IO requests are routed to this bus by means of the DW AMBA 3 AXI
|
||||||
|
Interconnect. In case of any APB protocol collisions, slave device
|
||||||
|
not responding on timeout an IRQ is raised with an erroneous address
|
||||||
|
reported to the APB terminator (APB Errors Handler Block). This
|
||||||
|
driver provides the interrupt handler to detect the erroneous
|
||||||
|
address, prints an error message about the address fault, updates an
|
||||||
|
errors counter. The counter and the APB-bus operations timeout can be
|
||||||
|
accessed via corresponding sysfs nodes.
|
||||||
|
|
||||||
config BT1_AXI
|
config BT1_AXI
|
||||||
tristate "Baikal-T1 AXI-bus driver"
|
tristate "Baikal-T1 AXI-bus driver"
|
||||||
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
|
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
|
||||||
|
|
|
||||||
|
|
@ -13,6 +13,7 @@ obj-$(CONFIG_MOXTET) += moxtet.o
|
||||||
# DPAA2 fsl-mc bus
|
# DPAA2 fsl-mc bus
|
||||||
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
|
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
|
||||||
|
|
||||||
|
obj-$(CONFIG_BT1_APB) += bt1-apb.o
|
||||||
obj-$(CONFIG_BT1_AXI) += bt1-axi.o
|
obj-$(CONFIG_BT1_AXI) += bt1-axi.o
|
||||||
obj-$(CONFIG_IMX_WEIM) += imx-weim.o
|
obj-$(CONFIG_IMX_WEIM) += imx-weim.o
|
||||||
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
|
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,422 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-only
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
|
||||||
|
*
|
||||||
|
* Authors:
|
||||||
|
* Serge Semin <Sergey.Semin@baikalelectronics.ru>
|
||||||
|
*
|
||||||
|
* Baikal-T1 APB-bus driver
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/types.h>
|
||||||
|
#include <linux/device.h>
|
||||||
|
#include <linux/atomic.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/nmi.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
#include <linux/regmap.h>
|
||||||
|
#include <linux/clk.h>
|
||||||
|
#include <linux/reset.h>
|
||||||
|
#include <linux/time64.h>
|
||||||
|
#include <linux/clk.h>
|
||||||
|
#include <linux/sysfs.h>
|
||||||
|
|
||||||
|
#define APB_EHB_ISR 0x00
|
||||||
|
#define APB_EHB_ISR_PENDING BIT(0)
|
||||||
|
#define APB_EHB_ISR_MASK BIT(1)
|
||||||
|
#define APB_EHB_ADDR 0x04
|
||||||
|
#define APB_EHB_TIMEOUT 0x08
|
||||||
|
|
||||||
|
#define APB_EHB_TIMEOUT_MIN 0x000003FFU
|
||||||
|
#define APB_EHB_TIMEOUT_MAX 0xFFFFFFFFU
|
||||||
|
|
||||||
|
/*
|
||||||
|
* struct bt1_apb - Baikal-T1 APB EHB private data
|
||||||
|
* @dev: Pointer to the device structure.
|
||||||
|
* @regs: APB EHB registers map.
|
||||||
|
* @res: No-device error injection memory region.
|
||||||
|
* @irq: Errors IRQ number.
|
||||||
|
* @rate: APB-bus reference clock rate.
|
||||||
|
* @pclk: APB-reference clock.
|
||||||
|
* @prst: APB domain reset line.
|
||||||
|
* @count: Number of errors detected.
|
||||||
|
*/
|
||||||
|
struct bt1_apb {
|
||||||
|
struct device *dev;
|
||||||
|
|
||||||
|
struct regmap *regs;
|
||||||
|
void __iomem *res;
|
||||||
|
int irq;
|
||||||
|
|
||||||
|
unsigned long rate;
|
||||||
|
struct clk *pclk;
|
||||||
|
|
||||||
|
struct reset_control *prst;
|
||||||
|
|
||||||
|
atomic_t count;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct regmap_config bt1_apb_regmap_cfg = {
|
||||||
|
.reg_bits = 32,
|
||||||
|
.val_bits = 32,
|
||||||
|
.reg_stride = 4,
|
||||||
|
.max_register = APB_EHB_TIMEOUT,
|
||||||
|
.fast_io = true
|
||||||
|
};
|
||||||
|
|
||||||
|
static inline unsigned long bt1_apb_n_to_timeout_us(struct bt1_apb *apb, u32 n)
|
||||||
|
{
|
||||||
|
u64 timeout = (u64)n * USEC_PER_SEC;
|
||||||
|
|
||||||
|
do_div(timeout, apb->rate);
|
||||||
|
|
||||||
|
return timeout;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline unsigned long bt1_apb_timeout_to_n_us(struct bt1_apb *apb,
|
||||||
|
unsigned long timeout)
|
||||||
|
{
|
||||||
|
u64 n = (u64)timeout * apb->rate;
|
||||||
|
|
||||||
|
do_div(n, USEC_PER_SEC);
|
||||||
|
|
||||||
|
return n;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
static irqreturn_t bt1_apb_isr(int irq, void *data)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = data;
|
||||||
|
u32 addr = 0;
|
||||||
|
|
||||||
|
regmap_read(apb->regs, APB_EHB_ADDR, &addr);
|
||||||
|
|
||||||
|
dev_crit_ratelimited(apb->dev,
|
||||||
|
"APB-bus fault %d: Slave access timeout at 0x%08x\n",
|
||||||
|
atomic_inc_return(&apb->count),
|
||||||
|
addr);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Print backtrace on each CPU. This might be pointless if the fault
|
||||||
|
* has happened on the same CPU as the IRQ handler is executed or
|
||||||
|
* the other core proceeded further execution despite the error.
|
||||||
|
* But if it's not, by looking at the trace we would get straight to
|
||||||
|
* the cause of the problem.
|
||||||
|
*/
|
||||||
|
trigger_all_cpu_backtrace();
|
||||||
|
|
||||||
|
regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, 0);
|
||||||
|
|
||||||
|
return IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void bt1_apb_clear_data(void *data)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = data;
|
||||||
|
struct platform_device *pdev = to_platform_device(apb->dev);
|
||||||
|
|
||||||
|
platform_set_drvdata(pdev, NULL);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct bt1_apb *bt1_apb_create_data(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct device *dev = &pdev->dev;
|
||||||
|
struct bt1_apb *apb;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
apb = devm_kzalloc(dev, sizeof(*apb), GFP_KERNEL);
|
||||||
|
if (!apb)
|
||||||
|
return ERR_PTR(-ENOMEM);
|
||||||
|
|
||||||
|
ret = devm_add_action(dev, bt1_apb_clear_data, apb);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Can't add APB EHB data clear action\n");
|
||||||
|
return ERR_PTR(ret);
|
||||||
|
}
|
||||||
|
|
||||||
|
apb->dev = dev;
|
||||||
|
atomic_set(&apb->count, 0);
|
||||||
|
platform_set_drvdata(pdev, apb);
|
||||||
|
|
||||||
|
return apb;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bt1_apb_request_regs(struct bt1_apb *apb)
|
||||||
|
{
|
||||||
|
struct platform_device *pdev = to_platform_device(apb->dev);
|
||||||
|
void __iomem *regs;
|
||||||
|
|
||||||
|
regs = devm_platform_ioremap_resource_byname(pdev, "ehb");
|
||||||
|
if (IS_ERR(regs)) {
|
||||||
|
dev_err(apb->dev, "Couldn't map APB EHB registers\n");
|
||||||
|
return PTR_ERR(regs);
|
||||||
|
}
|
||||||
|
|
||||||
|
apb->regs = devm_regmap_init_mmio(apb->dev, regs, &bt1_apb_regmap_cfg);
|
||||||
|
if (IS_ERR(apb->regs)) {
|
||||||
|
dev_err(apb->dev, "Couldn't create APB EHB regmap\n");
|
||||||
|
return PTR_ERR(apb->regs);
|
||||||
|
}
|
||||||
|
|
||||||
|
apb->res = devm_platform_ioremap_resource_byname(pdev, "nodev");
|
||||||
|
if (IS_ERR(apb->res)) {
|
||||||
|
dev_err(apb->dev, "Couldn't map reserved region\n");
|
||||||
|
return PTR_ERR(apb->res);
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bt1_apb_request_rst(struct bt1_apb *apb)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst");
|
||||||
|
if (IS_ERR(apb->prst)) {
|
||||||
|
dev_warn(apb->dev, "Couldn't get reset control line\n");
|
||||||
|
return PTR_ERR(apb->prst);
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = reset_control_deassert(apb->prst);
|
||||||
|
if (ret)
|
||||||
|
dev_err(apb->dev, "Failed to deassert the reset line\n");
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void bt1_apb_disable_clk(void *data)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = data;
|
||||||
|
|
||||||
|
clk_disable_unprepare(apb->pclk);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bt1_apb_request_clk(struct bt1_apb *apb)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
apb->pclk = devm_clk_get(apb->dev, "pclk");
|
||||||
|
if (IS_ERR(apb->pclk)) {
|
||||||
|
dev_err(apb->dev, "Couldn't get APB clock descriptor\n");
|
||||||
|
return PTR_ERR(apb->pclk);
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = clk_prepare_enable(apb->pclk);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(apb->dev, "Couldn't enable the APB clock\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = devm_add_action_or_reset(apb->dev, bt1_apb_disable_clk, apb);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(apb->dev, "Can't add APB EHB clocks disable action\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
apb->rate = clk_get_rate(apb->pclk);
|
||||||
|
if (!apb->rate) {
|
||||||
|
dev_err(apb->dev, "Invalid clock rate\n");
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void bt1_apb_clear_irq(void *data)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = data;
|
||||||
|
|
||||||
|
regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_MASK, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bt1_apb_request_irq(struct bt1_apb *apb)
|
||||||
|
{
|
||||||
|
struct platform_device *pdev = to_platform_device(apb->dev);
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
apb->irq = platform_get_irq(pdev, 0);
|
||||||
|
if (apb->irq < 0)
|
||||||
|
return apb->irq;
|
||||||
|
|
||||||
|
ret = devm_request_irq(apb->dev, apb->irq, bt1_apb_isr, IRQF_SHARED,
|
||||||
|
"bt1-apb", apb);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(apb->dev, "Couldn't request APB EHB IRQ\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = devm_add_action(apb->dev, bt1_apb_clear_irq, apb);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(apb->dev, "Can't add APB EHB IRQs clear action\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Unmask IRQ and clear it' pending flag. */
|
||||||
|
regmap_update_bits(apb->regs, APB_EHB_ISR,
|
||||||
|
APB_EHB_ISR_PENDING | APB_EHB_ISR_MASK,
|
||||||
|
APB_EHB_ISR_MASK);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static ssize_t count_show(struct device *dev, struct device_attribute *attr,
|
||||||
|
char *buf)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = dev_get_drvdata(dev);
|
||||||
|
|
||||||
|
return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&apb->count));
|
||||||
|
}
|
||||||
|
static DEVICE_ATTR_RO(count);
|
||||||
|
|
||||||
|
static ssize_t timeout_show(struct device *dev, struct device_attribute *attr,
|
||||||
|
char *buf)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = dev_get_drvdata(dev);
|
||||||
|
unsigned long timeout;
|
||||||
|
int ret;
|
||||||
|
u32 n;
|
||||||
|
|
||||||
|
ret = regmap_read(apb->regs, APB_EHB_TIMEOUT, &n);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
timeout = bt1_apb_n_to_timeout_us(apb, n);
|
||||||
|
|
||||||
|
return scnprintf(buf, PAGE_SIZE, "%lu\n", timeout);
|
||||||
|
}
|
||||||
|
|
||||||
|
static ssize_t timeout_store(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
const char *buf, size_t count)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = dev_get_drvdata(dev);
|
||||||
|
unsigned long timeout;
|
||||||
|
int ret;
|
||||||
|
u32 n;
|
||||||
|
|
||||||
|
if (kstrtoul(buf, 0, &timeout) < 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
n = bt1_apb_timeout_to_n_us(apb, timeout);
|
||||||
|
n = clamp(n, APB_EHB_TIMEOUT_MIN, APB_EHB_TIMEOUT_MAX);
|
||||||
|
|
||||||
|
ret = regmap_write(apb->regs, APB_EHB_TIMEOUT, n);
|
||||||
|
|
||||||
|
return ret ?: count;
|
||||||
|
}
|
||||||
|
static DEVICE_ATTR_RW(timeout);
|
||||||
|
|
||||||
|
static ssize_t inject_error_show(struct device *dev, struct device_attribute *attr,
|
||||||
|
char *buf)
|
||||||
|
{
|
||||||
|
return scnprintf(buf, PAGE_SIZE, "Error injection: nodev irq\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
static ssize_t inject_error_store(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
const char *data, size_t count)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = dev_get_drvdata(dev);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Either dummy read from the unmapped address in the APB IO area
|
||||||
|
* or manually set the IRQ status.
|
||||||
|
*/
|
||||||
|
if (!strncmp(data, "nodev", 5))
|
||||||
|
readl(apb->res);
|
||||||
|
else if (!strncmp(data, "irq", 3))
|
||||||
|
regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING,
|
||||||
|
APB_EHB_ISR_PENDING);
|
||||||
|
else
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
return count;
|
||||||
|
}
|
||||||
|
static DEVICE_ATTR_RW(inject_error);
|
||||||
|
|
||||||
|
static struct attribute *bt1_apb_sysfs_attrs[] = {
|
||||||
|
&dev_attr_count.attr,
|
||||||
|
&dev_attr_timeout.attr,
|
||||||
|
&dev_attr_inject_error.attr,
|
||||||
|
NULL
|
||||||
|
};
|
||||||
|
ATTRIBUTE_GROUPS(bt1_apb_sysfs);
|
||||||
|
|
||||||
|
static void bt1_apb_remove_sysfs(void *data)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb = data;
|
||||||
|
|
||||||
|
device_remove_groups(apb->dev, bt1_apb_sysfs_groups);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bt1_apb_init_sysfs(struct bt1_apb *apb)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = device_add_groups(apb->dev, bt1_apb_sysfs_groups);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(apb->dev, "Failed to create EHB APB sysfs nodes\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = devm_add_action_or_reset(apb->dev, bt1_apb_remove_sysfs, apb);
|
||||||
|
if (ret)
|
||||||
|
dev_err(apb->dev, "Can't add APB EHB sysfs remove action\n");
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bt1_apb_probe(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct bt1_apb *apb;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
apb = bt1_apb_create_data(pdev);
|
||||||
|
if (IS_ERR(apb))
|
||||||
|
return PTR_ERR(apb);
|
||||||
|
|
||||||
|
ret = bt1_apb_request_regs(apb);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = bt1_apb_request_rst(apb);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = bt1_apb_request_clk(apb);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = bt1_apb_request_irq(apb);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = bt1_apb_init_sysfs(apb);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id bt1_apb_of_match[] = {
|
||||||
|
{ .compatible = "baikal,bt1-apb" },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, bt1_apb_of_match);
|
||||||
|
|
||||||
|
static struct platform_driver bt1_apb_driver = {
|
||||||
|
.probe = bt1_apb_probe,
|
||||||
|
.driver = {
|
||||||
|
.name = "bt1-apb",
|
||||||
|
.of_match_table = bt1_apb_of_match
|
||||||
|
}
|
||||||
|
};
|
||||||
|
module_platform_driver(bt1_apb_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>");
|
||||||
|
MODULE_DESCRIPTION("Baikal-T1 APB-bus driver");
|
||||||
|
MODULE_LICENSE("GPL v2");
|
||||||
Loading…
Reference in New Issue