Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer updates from Dmitry Torokhov: "First set of updates for the input subsystem. You will get a new touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx SoC, large update to Atmel mXT touchscreen driver, a lot of drivers acquired device tree support and a slew of other fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: add MELFAS mms114 touchscreen driver Input: add support for key scan interface of the LPC32xx SoC Input: omap4-keypad - add device tree support Input: hanwang - add support for Art Master II tablet Input: spear_keyboard - reconfigure operating frequency on suspend Input: spear_keyboard - fix clock handling during suspend/resume Input: ff-memless - fix a couple min_t() casts Input: synaptics - print firmware ID and board number at init Input: spear_keyboard - generalize keyboard frequency configuration Input: spear_keyboard - rename bit definitions to reflect register Input: spear_keyboard - use correct io accessors Input: spear-keyboard - fix disable device_init_wakeup in remove Input: wacom_i2c - fix compiler warning Input: imx_keypad - check error returned by clk_prepare_enable() Input: imx_keypad - adapt the new kpp clock name Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare() Input: ad7879 - add option to correct xy axis Input: synaptics_usb - Remove TrackPoint name trailing whitespace Revert "Input: atmel_mxt_ts - warn if sysfs could not be created" Input: MT - Include win8 support ...
2012-07-26 12:59:53 -07:00 · 2012-07-26 12:59:53 -07:00 · 945c40c6b0
parent 0082c16e3a 314820c9e8
commit 945c40c6b0
33 changed files with 1841 additions and 504 deletions
--- a/Documentation/devicetree/bindings/input/lpc32xx-key.txt
+++ b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
@ -0,0 +1,28 @@
+NXP LPC32xx Key Scan Interface
+
+Required Properties:
+- compatible: Should be "nxp,lpc3220-key"
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The interrupt number to the cpu.
+- keypad,num-rows: Number of rows and columns, e.g. 1: 1x1, 6: 6x6
+- keypad,num-columns: Must be equal to keypad,num-rows since LPC32xx only
+  supports square matrices
+- nxp,debounce-delay-ms: Debounce delay in ms
+- nxp,scan-delay-ms: Repeated scan period in ms
+- linux,keymap: the key-code to be reported when the key is pressed
+  and released, see also
+  Documentation/devicetree/bindings/input/matrix-keymap.txt
+
+Example:
+
+	key@40050000 {
+		compatible = "nxp,lpc3220-key";
+		reg = <0x40050000 0x1000>;
+		interrupts = <54 0>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <1>;
+		nxp,debounce-delay-ms = <3>;
+		nxp,scan-delay-ms = <34>;
+		linux,keymap = <0x00000002>;
+	};
--- a/Documentation/devicetree/bindings/input/omap-keypad.txt
+++ b/Documentation/devicetree/bindings/input/omap-keypad.txt
@ -0,0 +1,31 @@
+* TI's Keypad Controller device tree bindings
+
+TI's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "ti,omap4-keypad": For controllers compatible with omap4 keypad
+      controller.
+
+Required Board Specific Properties, in addition to those specified by
+the shared matrix-keyboard bindings:
+- keypad,num-rows: Number of row lines connected to the keypad
+  controller.
+
+- keypad,num-columns: Number of column lines connected to the
+  keypad controller.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+
+Example:
+	keypad@4ae1c000{
+		compatible = "ti,omap4-keypad";
+		keypad,num-rows = <2>;
+		keypad,num-columns = <8>;
+		linux,keypad-no-autorepeat;
+	};
--- a/Documentation/devicetree/bindings/input/twl6040-vibra.txt
+++ b/Documentation/devicetree/bindings/input/twl6040-vibra.txt
@ -1,37 +0,0 @@
-Vibra driver for the twl6040 family
-
-The vibra driver is a child of the twl6040 MFD dirver.
-Documentation/devicetree/bindings/mfd/twl6040.txt
-
-Required properties:
- compatible : Must be "ti,twl6040-vibra";
- interrupts: 4, Vibra overcurrent interrupt
- vddvibl-supply: Regulator supplying the left vibra motor
- vddvibr-supply: Regulator supplying the right vibra motor
- vibldrv_res: Board specific left driver resistance
- vibrdrv_res: Board specific right driver resistance
- viblmotor_res: Board specific left motor resistance
- vibrmotor_res: Board specific right motor resistance
-
-Optional properties:
- vddvibl_uV: If the vddvibl default voltage need to be changed
- vddvibr_uV: If the vddvibr default voltage need to be changed
-
-Example:
-/*
- * 8-channel high quality low-power audio codec
- * http://www.ti.com/lit/ds/symlink/twl6040.pdf
- */
-twl6040: twl6040@4b {
-	...
-	twl6040_vibra: twl6040@1 {
-		compatible = "ti,twl6040-vibra";
-		interrupts = <4>;
-		vddvibl-supply = <&vbat>;
-		vddvibr-supply = <&vbat>;
-		vibldrv_res = <8>;
-		vibrdrv_res = <3>;
-		viblmotor_res = <10>;
-		vibrmotor_res = <10>;
-	};
-};
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@ -162,26 +162,48 @@ are divided into categories, to allow for partial implementation.  The
 minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
 allows for multiple contacts to be tracked.  If the device supports it, the
 ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching contact, respectively.
+of the contact area and approaching tool, respectively.

 The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
 looking through a window at someone gently holding a finger against the
 glass.  You will see two regions, one inner region consisting of the part
 of the finger actually touching the glass, and one outer region formed by
-the perimeter of the finger. The diameter of the inner region is the
-ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
-ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
-against the glass. The inner region will increase, and in general, the
-ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the contact pressure. For pressure-based devices,
+the perimeter of the finger. The center of the touching region (a) is
+ABS_MT_POSITION_X/Y and the center of the approaching finger (b) is
+ABS_MT_TOOL_X/Y. The touch diameter is ABS_MT_TOUCH_MAJOR and the finger
+diameter is ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger
+harder against the glass. The touch region will increase, and in general,
+the ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller
+than unity, is related to the contact pressure. For pressure-based devices,
 ABS_MT_PRESSURE may be used to provide the pressure on the contact area
 instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to
 indicate the distance between the contact and the surface.

-In addition to the MAJOR parameters, the oval shape of the contact can be
-described by adding the MINOR parameters, such that MAJOR and MINOR are the
-major and minor axis of an ellipse. Finally, the orientation of the oval
-shape can be describe with the ORIENTATION parameter.
+
+	  Linux MT                               Win8
+         __________                     _______________________
+        /          \                   |                       |
+       /            \                  |                       |
+      /     ____     \                 |                       |
+     /     /    \     \                |                       |
+     \     \  a  \     \               |       a               |
+      \     \____/      \              |                       |
+       \                 \             |                       |
+        \        b        \            |           b           |
+         \                 \           |                       |
+          \                 \          |                       |
+           \                 \         |                       |
+            \                /         |                       |
+             \              /          |                       |
+              \            /           |                       |
+               \__________/            |_______________________|
+
+
+In addition to the MAJOR parameters, the oval shape of the touch and finger
+regions can be described by adding the MINOR parameters, such that MAJOR
+and MINOR are the major and minor axis of an ellipse. The orientation of
+the touch ellipse can be described with the ORIENTATION parameter, and the
+direction of the finger ellipse is given by the vector (a - b).

 For type A devices, further specification of the touch shape is possible
 via ABS_MT_BLOB_ID.
@ -224,7 +246,7 @@ tool. Omit if circular [4].
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
 the notion of pressure. The fingers of the hand and the palm all have
-different characteristic widths [1].
+different characteristic widths.

 ABS_MT_PRESSURE

@ -240,17 +262,24 @@ the contact is hovering above the surface.

 ABS_MT_ORIENTATION

-The orientation of the ellipse. The value should describe a signed quarter
-of a revolution clockwise around the touch center. The signed value range
-is arbitrary, but zero should be returned for a finger aligned along the Y
-axis of the surface, a negative value when finger is turned to the left, and
-a positive value when finger turned to the right. When completely aligned with
-the X axis, the range max should be returned.  Orientation can be omitted
-if the touching object is circular, or if the information is not available
-in the kernel driver. Partial orientation support is possible if the device
-can distinguish between the two axis, but not (uniquely) any values in
-between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
-[4].
+The orientation of the touching ellipse. The value should describe a signed
+quarter of a revolution clockwise around the touch center. The signed value
+range is arbitrary, but zero should be returned for an ellipse aligned with
+the Y axis of the surface, a negative value when the ellipse is turned to
+the left, and a positive value when the ellipse is turned to the
+right. When completely aligned with the X axis, the range max should be
+returned.
+
+Touch ellipsis are symmetrical by default. For devices capable of true 360
+degree orientation, the reported orientation must exceed the range max to
+indicate more than a quarter of a revolution. For an upside-down finger,
+range max * 2 should be returned.
+
+Orientation can be omitted if the touch area is circular, or if the
+information is not available in the kernel driver. Partial orientation
+support is possible if the device can distinguish between the two axis, but
+not (uniquely) any values in between. In such cases, the range of
+ABS_MT_ORIENTATION should be [0, 1] [4].

 ABS_MT_POSITION_X

@ -260,6 +289,23 @@ ABS_MT_POSITION_Y

 The surface Y coordinate of the center of the touching ellipse.

+ABS_MT_TOOL_X
+
+The surface X coordinate of the center of the approaching tool. Omit if
+the device cannot distinguish between the intended touch point and the
+tool itself.
+
+ABS_MT_TOOL_Y
+
+The surface Y coordinate of the center of the approaching tool. Omit if the
+device cannot distinguish between the intended touch point and the tool
+itself.
+
+The four position values can be used to separate the position of the touch
+from the position of the tool. If both positions are present, the major
+tool axis points towards the touch point [1]. Otherwise, the tool axes are
+aligned with the touch axes.
+
 ABS_MT_TOOL_TYPE

 The type of approaching tool. A lot of kernel drivers cannot distinguish
@ -305,6 +351,28 @@ The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
 the device can distinguish between a finger along the Y axis (0) and a
 finger along the X axis (1).

+For win8 devices with both T and C coordinates, the position mapping is
+
+   ABS_MT_POSITION_X := T_X
+   ABS_MT_POSITION_Y := T_Y
+   ABS_MT_TOOL_X := C_X
+   ABS_MT_TOOL_X := C_Y
+
+Unfortunately, there is not enough information to specify both the touching
+ellipse and the tool ellipse, so one has to resort to approximations.  One
+simple scheme, which is compatible with earlier usage, is:
+
+   ABS_MT_TOUCH_MAJOR := min(X, Y)
+   ABS_MT_TOUCH_MINOR := <not used>
+   ABS_MT_ORIENTATION := <not used>
+   ABS_MT_WIDTH_MAJOR := min(X, Y) + distance(T, C)
+   ABS_MT_WIDTH_MINOR := min(X, Y)
+
+Rationale: We have no information about the orientation of the touching
+ellipse, so approximate it with an inscribed circle instead. The tool
+ellipse should align with the the vector (T - C), so the diameter must
+increase with distance(T, C). Finally, assume that the touch diameter is
+equal to the tool thickness, and we arrive at the formulas above.

 Finger Tracking
 ---------------
@ -338,9 +406,7 @@ subsequent events of the same type refer to different fingers.
 For example usage of the type A protocol, see the bcm5974 driver. For
 example usage of the type B protocol, see the hid-egalax driver.

-[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
-difference between the contact position and the approaching tool position
-could be used to derive tilt.
+[1] Also, the difference (TOOL_X - POSITION_X) can be used to model tilt.
 [2] The list can of course be extended.
 [3] The mtdev project: http://bitmath.org/code/mtdev/.
 [4] See the section on event computation.
--- a/arch/arm/plat-spear/include/plat/keyboard.h
+++ b/arch/arm/plat-spear/include/plat/keyboard.h
@ -149,6 +149,7 @@ int _name[] = { \
 * keymap: pointer to keymap data (table and size)
 * rep: enables key autorepeat
 * mode: choose keyboard support(9x9, 6x6, 2x2)
+ * suspended_rate: rate at which keyboard would operate in suspended mode
 *
 * This structure is supposed to be used by platform code to supply
 * keymaps to drivers that implement keyboards.
@ -157,6 +158,7 @@ struct kbd_platform_data {
 	const struct matrix_keymap_data *keymap;
 	bool rep;
 	unsigned int mode;
+	unsigned int suspended_rate;
 };

 #endif /* __PLAT_KEYBOARD_H */
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@ -176,7 +176,7 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 			 value, envelope->attack_level);
 		time_from_level = jiffies_to_msecs(now - state->play_at);
 		time_of_envelope = envelope->attack_length;
-		envelope_level = min_t(__s16, envelope->attack_level, 0x7fff);
+		envelope_level = min_t(u16, envelope->attack_level, 0x7fff);

 	} else if (envelope->fade_length && effect->replay.length &&
 		   time_after(now,
@ -184,7 +184,7 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 		   time_before(now, state->stop_at)) {
 		time_from_level = jiffies_to_msecs(state->stop_at - now);
 		time_of_envelope = envelope->fade_length;
-		envelope_level = min_t(__s16, envelope->fade_level, 0x7fff);
+		envelope_level = min_t(u16, envelope->fade_level, 0x7fff);
 	} else
 		return value;

--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@ -135,7 +135,7 @@ EXPORT_SYMBOL(input_mt_report_finger_count);
 */
 void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
 {
-	struct input_mt_slot *oldest = 0;
+	struct input_mt_slot *oldest = NULL;
 	int oldid = dev->trkid;
 	int count = 0;
 	int i;
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@ -332,6 +332,16 @@ config KEYBOARD_LOCOMO
 	  To compile this driver as a module, choose M here: the
 	  module will be called locomokbd.

+config KEYBOARD_LPC32XX
+	tristate "LPC32XX matrix key scanner support"
+	depends on ARCH_LPC32XX && OF
+	help
+	  Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
+	  connected to a key matrix.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lpc32xx-keys.
+
 config KEYBOARD_MAPLE
 	tristate "Maple bus keyboard"
 	depends on SH_DREAMCAST && MAPLE
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@ -26,6 +26,7 @@ obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
 obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
 obj-$(CONFIG_KEYBOARD_LM8333)		+= lm8333.o
 obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
+obj-$(CONFIG_KEYBOARD_LPC32XX)		+= lpc32xx-keys.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@ -559,7 +559,6 @@ static int gpio_keys_get_devtree_pdata(struct device *dev,
 	pdata->rep = !!of_get_property(node, "autorepeat", NULL);

 	/* First count the subnodes */
-	pdata->nbuttons = 0;
 	pp = NULL;
 	while ((pp = of_get_next_child(node, pp)))
 		pdata->nbuttons++;
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@ -378,20 +378,24 @@ static void imx_keypad_close(struct input_dev *dev)
 	imx_keypad_inhibit(keypad);

 	/* Disable clock unit */
-	clk_disable(keypad->clk);
+	clk_disable_unprepare(keypad->clk);
 }

 static int imx_keypad_open(struct input_dev *dev)
 {
 	struct imx_keypad *keypad = input_get_drvdata(dev);
+	int error;

 	dev_dbg(&dev->dev, ">%s\n", __func__);

+	/* Enable the kpp clock */
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
+
 	/* We became active from now */
 	keypad->enabled = true;

-	/* Enable the kpp clock */
-	clk_enable(keypad->clk);
 	imx_keypad_config(keypad);

 	/* Sanity control, not all the rows must be actived now. */
@ -467,7 +471,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 		goto failed_free_priv;
 	}

-	keypad->clk = clk_get(&pdev->dev, "kpp");
+	keypad->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk)) {
 		dev_err(&pdev->dev, "failed to get keypad clock\n");
 		error = PTR_ERR(keypad->clk);
@ -581,7 +585,7 @@ static int imx_kbd_suspend(struct device *dev)
 	mutex_lock(&input_dev->mutex);

 	if (input_dev->users)
-		clk_disable(kbd->clk);
+		clk_disable_unprepare(kbd->clk);

 	mutex_unlock(&input_dev->mutex);

@ -596,18 +600,23 @@ static int imx_kbd_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = kbd->input_dev;
+	int ret = 0;

 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(kbd->irq);

 	mutex_lock(&input_dev->mutex);

-	if (input_dev->users)
-		clk_enable(kbd->clk);
+	if (input_dev->users) {
+		ret = clk_prepare_enable(kbd->clk);
+		if (ret)
+			goto err_clk;
+	}

+err_clk:
 	mutex_unlock(&input_dev->mutex);

-	return 0;
+	return ret;
 }
 #endif

--- a/drivers/input/keyboard/lpc32xx-keys.c
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@ -0,0 +1,394 @@
+/*
+ * NXP LPC32xx SoC Key Scan Interface
+ *
+ * Authors:
+ *    Kevin Wells <kevin.wells@nxp.com>
+ *    Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * This controller supports square key matrices from 1x1 up to 8x8
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/input/matrix_keypad.h>
+
+#define DRV_NAME				"lpc32xx_keys"
+
+/*
+ * Key scanner register offsets
+ */
+#define LPC32XX_KS_DEB(x)			((x) + 0x00)
+#define LPC32XX_KS_STATE_COND(x)		((x) + 0x04)
+#define LPC32XX_KS_IRQ(x)			((x) + 0x08)
+#define LPC32XX_KS_SCAN_CTL(x)			((x) + 0x0C)
+#define LPC32XX_KS_FAST_TST(x)			((x) + 0x10)
+#define LPC32XX_KS_MATRIX_DIM(x)		((x) + 0x14) /* 1..8 */
+#define LPC32XX_KS_DATA(x, y)			((x) + 0x40 + ((y) << 2))
+
+#define LPC32XX_KSCAN_DEB_NUM_DEB_PASS(n)	((n) & 0xFF)
+
+#define LPC32XX_KSCAN_SCOND_IN_IDLE		0x0
+#define LPC32XX_KSCAN_SCOND_IN_SCANONCE		0x1
+#define LPC32XX_KSCAN_SCOND_IN_IRQGEN		0x2
+#define LPC32XX_KSCAN_SCOND_IN_SCAN_MATRIX	0x3
+
+#define LPC32XX_KSCAN_IRQ_PENDING_CLR		0x1
+
+#define LPC32XX_KSCAN_SCTRL_SCAN_DELAY(n)	((n) & 0xFF)
+
+#define LPC32XX_KSCAN_FTST_FORCESCANONCE	0x1
+#define LPC32XX_KSCAN_FTST_USE32K_CLK		0x2
+
+#define LPC32XX_KSCAN_MSEL_SELECT(n)		((n) & 0xF)
+
+struct lpc32xx_kscan_drv {
+	struct input_dev *input;
+	struct clk *clk;
+	struct resource *iores;
+	void __iomem *kscan_base;
+	unsigned int irq;
+
+	u32 matrix_sz;		/* Size of matrix in XxY, ie. 3 = 3x3 */
+	u32 deb_clks;		/* Debounce clocks (based on 32KHz clock) */
+	u32 scan_delay;		/* Scan delay (based on 32KHz clock) */
+
+	unsigned short *keymap;	/* Pointer to key map for the scan matrix */
+	unsigned int row_shift;
+
+	u8 lastkeystates[8];
+};
+
+static void lpc32xx_mod_states(struct lpc32xx_kscan_drv *kscandat, int col)
+{
+	struct input_dev *input = kscandat->input;
+	unsigned row, changed, scancode, keycode;
+	u8 key;
+
+	key = readl(LPC32XX_KS_DATA(kscandat->kscan_base, col));
+	changed = key ^ kscandat->lastkeystates[col];
+	kscandat->lastkeystates[col] = key;
+
+	for (row = 0; changed; row++, changed >>= 1) {
+		if (changed & 1) {
+			/* Key state changed, signal an event */
+			scancode = MATRIX_SCAN_CODE(row, col,
+						    kscandat->row_shift);
+			keycode = kscandat->keymap[scancode];
+			input_event(input, EV_MSC, MSC_SCAN, scancode);
+			input_report_key(input, keycode, key & (1 << row));
+		}
+	}
+}
+
+static irqreturn_t lpc32xx_kscan_irq(int irq, void *dev_id)
+{
+	struct lpc32xx_kscan_drv *kscandat = dev_id;
+	int i;
+
+	for (i = 0; i < kscandat->matrix_sz; i++)
+		lpc32xx_mod_states(kscandat, i);
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+	input_sync(kscandat->input);
+
+	return IRQ_HANDLED;
+}
+
+static int lpc32xx_kscan_open(struct input_dev *dev)
+{
+	struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+	int error;
+
+	error = clk_prepare_enable(kscandat->clk);
+	if (error)
+		return error;
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+	return 0;
+}
+
+static void lpc32xx_kscan_close(struct input_dev *dev)
+{
+	struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	clk_disable_unprepare(kscandat->clk);
+}
+
+static int __devinit lpc32xx_parse_dt(struct device *dev,
+				      struct lpc32xx_kscan_drv *kscandat)
+{
+	struct device_node *np = dev->of_node;
+	u32 rows = 0, columns = 0;
+
+	of_property_read_u32(np, "keypad,num-rows", &rows);
+	of_property_read_u32(np, "keypad,num-columns", &columns);
+	if (!rows || rows != columns) {
+		dev_err(dev,
+			"rows and columns must be specified and be equal!\n");
+		return -EINVAL;
+	}
+
+	kscandat->matrix_sz = rows;
+	kscandat->row_shift = get_count_order(columns);
+
+	of_property_read_u32(np, "nxp,debounce-delay-ms", &kscandat->deb_clks);
+	of_property_read_u32(np, "nxp,scan-delay-ms", &kscandat->scan_delay);
+	if (!kscandat->deb_clks || !kscandat->scan_delay) {
+		dev_err(dev, "debounce or scan delay not specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __devinit lpc32xx_kscan_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_kscan_drv *kscandat;
+	struct input_dev *input;
+	struct resource *res;
+	size_t keymap_size;
+	int error;
+	int irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform I/O memory\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0 || irq >= NR_IRQS) {
+		dev_err(&pdev->dev, "failed to get platform irq\n");
+		return -EINVAL;
+	}
+
+	kscandat = kzalloc(sizeof(struct lpc32xx_kscan_drv), GFP_KERNEL);
+	if (!kscandat) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	error = lpc32xx_parse_dt(&pdev->dev, kscandat);
+	if (error) {
+		dev_err(&pdev->dev, "failed to parse device tree\n");
+		goto err_free_mem;
+	}
+
+	keymap_size = sizeof(kscandat->keymap[0]) *
+				(kscandat->matrix_sz << kscandat->row_shift);
+	kscandat->keymap = kzalloc(keymap_size, GFP_KERNEL);
+	if (!kscandat->keymap) {
+		dev_err(&pdev->dev, "could not allocate memory for keymap\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kscandat->input = input = input_allocate_device();
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err_free_keymap;
+	}
+
+	/* Setup key input */
+	input->name		= pdev->name;
+	input->phys		= "lpc32xx/input0";
+	input->id.vendor	= 0x0001;
+	input->id.product	= 0x0001;
+	input->id.version	= 0x0100;
+	input->open		= lpc32xx_kscan_open;
+	input->close		= lpc32xx_kscan_close;
+	input->dev.parent	= &pdev->dev;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   kscandat->matrix_sz,
+					   kscandat->matrix_sz,
+					   kscandat->keymap, kscandat->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_free_input;
+	}
+
+	input_set_drvdata(kscandat->input, kscandat);
+
+	kscandat->iores = request_mem_region(res->start, resource_size(res),
+					     pdev->name);
+	if (!kscandat->iores) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto err_free_input;
+	}
+
+	kscandat->kscan_base = ioremap(kscandat->iores->start,
+				       resource_size(kscandat->iores));
+	if (!kscandat->kscan_base) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -EBUSY;
+		goto err_release_memregion;
+	}
+
+	/* Get the key scanner clock */
+	kscandat->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kscandat->clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		error = PTR_ERR(kscandat->clk);
+		goto err_unmap;
+	}
+
+	/* Configure the key scanner */
+	error = clk_prepare_enable(kscandat->clk);
+	if (error)
+		goto err_clk_put;
+
+	writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base));
+	writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
+	writel(LPC32XX_KSCAN_FTST_USE32K_CLK,
+	       LPC32XX_KS_FAST_TST(kscandat->kscan_base));
+	writel(kscandat->matrix_sz,
+	       LPC32XX_KS_MATRIX_DIM(kscandat->kscan_base));
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	clk_disable_unprepare(kscandat->clk);
+
+	error = request_irq(irq, lpc32xx_kscan_irq, 0, pdev->name, kscandat);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		goto err_clk_put;
+	}
+
+	error = input_register_device(kscandat->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, kscandat);
+	return 0;
+
+err_free_irq:
+	free_irq(irq, kscandat);
+err_clk_put:
+	clk_put(kscandat->clk);
+err_unmap:
+	iounmap(kscandat->kscan_base);
+err_release_memregion:
+	release_mem_region(kscandat->iores->start,
+			   resource_size(kscandat->iores));
+err_free_input:
+	input_free_device(kscandat->input);
+err_free_keymap:
+	kfree(kscandat->keymap);
+err_free_mem:
+	kfree(kscandat);
+
+	return error;
+}
+
+static int __devexit lpc32xx_kscan_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+
+	free_irq(platform_get_irq(pdev, 0), kscandat);
+	clk_put(kscandat->clk);
+	iounmap(kscandat->kscan_base);
+	release_mem_region(kscandat->iores->start,
+			   resource_size(kscandat->iores));
+	input_unregister_device(kscandat->input);
+	kfree(kscandat->keymap);
+	kfree(kscandat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lpc32xx_kscan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+	struct input_dev *input = kscandat->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		/* Clear IRQ and disable clock */
+		writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+		clk_disable_unprepare(kscandat->clk);
+	}
+
+	mutex_unlock(&input->mutex);
+	return 0;
+}
+
+static int lpc32xx_kscan_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+	struct input_dev *input = kscandat->input;
+	int retval = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		/* Enable clock and clear IRQ */
+		retval = clk_prepare_enable(kscandat->clk);
+		if (retval == 0)
+			writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	}
+
+	mutex_unlock(&input->mutex);
+	return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lpc32xx_kscan_pm_ops, lpc32xx_kscan_suspend,
+			 lpc32xx_kscan_resume);
+
+static const struct of_device_id lpc32xx_kscan_match[] = {
+	{ .compatible = "nxp,lpc3220-key" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
+
+static struct platform_driver lpc32xx_kscan_driver = {
+	.probe		= lpc32xx_kscan_probe,
+	.remove		= __devexit_p(lpc32xx_kscan_remove),
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &lpc32xx_kscan_pm_ops,
+		.of_match_table = of_match_ptr(lpc32xx_kscan_match),
+	}
+};
+
+module_platform_driver(lpc32xx_kscan_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("Key scanner driver for LPC32XX devices");
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@ -49,6 +49,7 @@
 #define SKE_ASR3	0x2C

 #define SKE_NUM_ASRX_REGISTERS	(4)
+#define	KEY_PRESSED_DELAY	10

 /**
 * struct ske_keypad  - data structure used by keypad driver
@ -92,7 +93,7 @@ static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
 static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
 {
 	u32 value;
-	int timeout = 50;
+	int timeout = keypad->board->debounce_ms;

 	/* check SKE_RIS to be 0 */
 	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
@ -135,12 +136,37 @@ static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
 	return 0;
 }

+static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
+{
+	int row = 0, code, pos;
+	struct input_dev *input = keypad->input;
+	u32 ske_ris;
+	int key_pressed;
+	int num_of_rows;
+
+	/* find out the row */
+	num_of_rows = hweight8(status);
+	do {
+		pos = __ffs(status);
+		row = pos;
+		status &= ~(1 << pos);
+
+		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+		ske_ris = readl(keypad->reg_base + SKE_RIS);
+		key_pressed = ske_ris & SKE_KPRISA;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], key_pressed);
+		input_sync(input);
+		num_of_rows--;
+	} while (num_of_rows);
+}
+
 static void ske_keypad_read_data(struct ske_keypad *keypad)
 {
-	struct input_dev *input = keypad->input;
-	u16 status;
-	int col = 0, row = 0, code;
-	int ske_asr, ske_ris, key_pressed, i;
+	u8 status;
+	int col = 0;
+	int ske_asr, i;

 	/*
 	 * Read the auto scan registers
@ -154,44 +180,38 @@ static void ske_keypad_read_data(struct ske_keypad *keypad)
 		if (!ske_asr)
 			continue;

-		/* now that ASRx is zero, find out the column x and row y*/
-		if (ske_asr & 0xff) {
+		/* now that ASRx is zero, find out the coloumn x and row y */
+		status = ske_asr & 0xff;
+		if (status) {
 			col = i * 2;
-			status = ske_asr & 0xff;
-		} else {
-			col = (i * 2) + 1;
-			status = (ske_asr & 0xff00) >> 8;
+			ske_keypad_report(keypad, status, col);
+		}
+		status = (ske_asr & 0xff00) >> 8;
+		if (status) {
+			col = (i * 2) + 1;
+			ske_keypad_report(keypad, status, col);
 		}
-
-		/* find out the row */
-		row = __ffs(status);
-
-		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
-		ske_ris = readl(keypad->reg_base + SKE_RIS);
-		key_pressed = ske_ris & SKE_KPRISA;
-
-		input_event(input, EV_MSC, MSC_SCAN, code);
-		input_report_key(input, keypad->keymap[code], key_pressed);
-		input_sync(input);
 	}
 }

 static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
 {
 	struct ske_keypad *keypad = dev_id;
-	int retries = 20;
+	int timeout = keypad->board->debounce_ms;

 	/* disable auto scan interrupt; mask the interrupt generated */
 	ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
 	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);

-	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries)
-		msleep(5);
+	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
+		cpu_relax();

-	if (retries) {
-		/* SKEx registers are stable and can be read */
-		ske_keypad_read_data(keypad);
-	}
+	/* SKEx registers are stable and can be read */
+	ske_keypad_read_data(keypad);
+
+	/* wait until raw interrupt is clear */
+	while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
+		msleep(KEY_PRESSED_DELAY);

 	/* enable auto scan interrupts */
 	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
@ -84,8 +85,9 @@ struct omap4_keypad {
 	u32 reg_offset;
 	u32 irqreg_offset;
 	unsigned int row_shift;
+	bool no_autorepeat;
 	unsigned char key_state[8];
-	unsigned short keymap[];
+	unsigned short *keymap;
 };

 static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
@ -208,25 +210,51 @@ static void omap4_keypad_close(struct input_dev *input)
 	pm_runtime_put_sync(input->dev.parent);
 }

+#ifdef CONFIG_OF
+static int __devinit omap4_keypad_parse_dt(struct device *dev,
+					   struct omap4_keypad *keypad_data)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!np) {
+		dev_err(dev, "missing DT data");
+		return -EINVAL;
+	}
+
+	of_property_read_u32(np, "keypad,num-rows", &keypad_data->rows);
+	of_property_read_u32(np, "keypad,num-columns", &keypad_data->cols);
+	if (!keypad_data->rows || !keypad_data->cols) {
+		dev_err(dev, "number of keypad rows/columns not specified\n");
+		return -EINVAL;
+	}
+
+	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+		keypad_data->no_autorepeat = true;
+
+	return 0;
+}
+#else
+static inline int omap4_keypad_parse_dt(struct device *dev,
+					struct omap4_keypad *keypad_data)
+{
+	return -ENOSYS;
+}
+#endif
+
 static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 {
-	const struct omap4_keypad_platform_data *pdata;
+	const struct omap4_keypad_platform_data *pdata =
+				dev_get_platdata(&pdev->dev);
+	const struct matrix_keymap_data *keymap_data =
+				pdata ? pdata->keymap_data : NULL;
 	struct omap4_keypad *keypad_data;
 	struct input_dev *input_dev;
 	struct resource *res;
-	resource_size_t size;
-	unsigned int row_shift, max_keys;
+	unsigned int max_keys;
 	int rev;
 	int irq;
 	int error;

-	/* platform data */
-	pdata = pdev->dev.platform_data;
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		return -EINVAL;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "no base address specified\n");
@ -239,25 +267,24 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}

-	if (!pdata->keymap_data) {
-		dev_err(&pdev->dev, "no keymap data defined\n");
-		return -EINVAL;
-	}
-
-	row_shift = get_count_order(pdata->cols);
-	max_keys = pdata->rows << row_shift;
-
-	keypad_data = kzalloc(sizeof(struct omap4_keypad) +
-				max_keys * sizeof(keypad_data->keymap[0]),
-			      GFP_KERNEL);
+	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
 	if (!keypad_data) {
 		dev_err(&pdev->dev, "keypad_data memory allocation failed\n");
 		return -ENOMEM;
 	}

-	size = resource_size(res);
+	keypad_data->irq = irq;

-	res = request_mem_region(res->start, size, pdev->name);
+	if (pdata) {
+		keypad_data->rows = pdata->rows;
+		keypad_data->cols = pdata->cols;
+	} else {
+		error = omap4_keypad_parse_dt(&pdev->dev, keypad_data);
+		if (error)
+			return error;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
 	if (!res) {
 		dev_err(&pdev->dev, "can't request mem region\n");
 		error = -EBUSY;
@ -271,15 +298,11 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 		goto err_release_mem;
 	}

-	keypad_data->irq = irq;
-	keypad_data->row_shift = row_shift;
-	keypad_data->rows = pdata->rows;
-	keypad_data->cols = pdata->cols;

 	/*
-	* Enable clocks for the keypad module so that we can read
-	* revision register.
-	*/
+	 * Enable clocks for the keypad module so that we can read
+	 * revision register.
+	 */
 	pm_runtime_enable(&pdev->dev);
 	error = pm_runtime_get_sync(&pdev->dev);
 	if (error) {
@ -322,18 +345,29 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	input_dev->open = omap4_keypad_open;
 	input_dev->close = omap4_keypad_close;

-	error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
-					   pdata->rows, pdata->cols,
-					   keypad_data->keymap, input_dev);
-	if (error) {
-		dev_err(&pdev->dev, "failed to build keymap\n");
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	if (!keypad_data->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
+
+	input_set_drvdata(input_dev, keypad_data);
+
+	keypad_data->row_shift = get_count_order(keypad_data->cols);
+	max_keys = keypad_data->rows << keypad_data->row_shift;
+	keypad_data->keymap = kzalloc(max_keys * sizeof(keypad_data->keymap[0]),
+				      GFP_KERNEL);
+	if (!keypad_data->keymap) {
+		dev_err(&pdev->dev, "Not enough memory for keymap\n");
+		error = -ENOMEM;
 		goto err_free_input;
 	}

-	__set_bit(EV_REP, input_dev->evbit);
-	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
-
-	input_set_drvdata(input_dev, keypad_data);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   keypad_data->rows, keypad_data->cols,
+					   keypad_data->keymap, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_free_keymap;
+	}

 	error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
 			     IRQF_TRIGGER_RISING,
@ -357,6 +391,8 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
 	free_irq(keypad_data->irq, keypad_data);
+err_free_keymap:
+	kfree(keypad_data->keymap);
 err_free_input:
 	input_free_device(input_dev);
 err_pm_put_sync:
@ -364,7 +400,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 err_unmap:
 	iounmap(keypad_data->base);
 err_release_mem:
-	release_mem_region(res->start, size);
+	release_mem_region(res->start, resource_size(res));
 err_free_keypad:
 	kfree(keypad_data);
 	return error;
@ -386,18 +422,29 @@ static int __devexit omap4_keypad_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));

+	kfree(keypad_data->keymap);
 	kfree(keypad_data);
+
 	platform_set_drvdata(pdev, NULL);

 	return 0;
 }

+#ifdef CONFIG_OF
+static const struct of_device_id omap_keypad_dt_match[] = {
+	{ .compatible = "ti,omap4-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
+#endif
+
 static struct platform_driver omap4_keypad_driver = {
 	.probe		= omap4_keypad_probe,
 	.remove		= __devexit_p(omap4_keypad_remove),
 	.driver		= {
 		.name	= "omap4-keypad",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(omap_keypad_dt_match),
 	},
 };
 module_platform_driver(omap4_keypad_driver);
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@ -27,33 +27,31 @@
 #include <plat/keyboard.h>

 /* Keyboard Registers */
-#define MODE_REG	0x00	/* 16 bit reg */
-#define STATUS_REG	0x0C	/* 2 bit reg */
-#define DATA_REG	0x10	/* 8 bit reg */
+#define MODE_CTL_REG	0x00
+#define STATUS_REG	0x0C
+#define DATA_REG	0x10
 #define INTR_MASK	0x54

 /* Register Values */
-/*
- * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode
- * control register as 1010010(82MHZ)
- */
-#define PCLK_FREQ_MSK	0xA400	/* 82 MHz */
-#define START_SCAN	0x0100
-#define SCAN_RATE_10	0x0000
-#define SCAN_RATE_20	0x0004
-#define SCAN_RATE_40	0x0008
-#define SCAN_RATE_80	0x000C
-#define MODE_KEYBOARD	0x0002
-#define DATA_AVAIL	0x2
-
-#define KEY_MASK	0xFF000000
-#define KEY_VALUE	0x00FFFFFF
-#define ROW_MASK	0xF0
-#define COLUMN_MASK	0x0F
 #define NUM_ROWS	16
 #define NUM_COLS	16
+#define MODE_CTL_PCLK_FREQ_SHIFT	9
+#define MODE_CTL_PCLK_FREQ_MSK		0x7F

-#define KEY_MATRIX_SHIFT	6
+#define MODE_CTL_KEYBOARD	(0x2 << 0)
+#define MODE_CTL_SCAN_RATE_10	(0x0 << 2)
+#define MODE_CTL_SCAN_RATE_20	(0x1 << 2)
+#define MODE_CTL_SCAN_RATE_40	(0x2 << 2)
+#define MODE_CTL_SCAN_RATE_80	(0x3 << 2)
+#define MODE_CTL_KEYNUM_SHIFT	6
+#define MODE_CTL_START_SCAN	(0x1 << 8)
+
+#define STATUS_DATA_AVAIL	(0x1 << 1)
+
+#define DATA_ROW_MASK		0xF0
+#define DATA_COLUMN_MASK	0x0F
+
+#define ROW_SHIFT		4

 struct spear_kbd {
 	struct input_dev *input;
@ -65,6 +63,8 @@ struct spear_kbd {
 	unsigned short last_key;
 	unsigned short keycodes[NUM_ROWS * NUM_COLS];
 	bool rep;
+	unsigned int suspended_rate;
+	u32 mode_ctl_reg;
 };

 static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
@ -72,10 +72,10 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	struct spear_kbd *kbd = dev_id;
 	struct input_dev *input = kbd->input;
 	unsigned int key;
-	u8 sts, val;
+	u32 sts, val;

-	sts = readb(kbd->io_base + STATUS_REG);
-	if (!(sts & DATA_AVAIL))
+	sts = readl_relaxed(kbd->io_base + STATUS_REG);
+	if (!(sts & STATUS_DATA_AVAIL))
 		return IRQ_NONE;

 	if (kbd->last_key != KEY_RESERVED) {
@ -84,7 +84,8 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	}

 	/* following reads active (row, col) pair */
-	val = readb(kbd->io_base + DATA_REG);
+	val = readl_relaxed(kbd->io_base + DATA_REG) &
+		(DATA_ROW_MASK | DATA_COLUMN_MASK);
 	key = kbd->keycodes[val];

 	input_event(input, EV_MSC, MSC_SCAN, val);
@ -94,7 +95,7 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	kbd->last_key = key;

 	/* clear interrupt */
-	writeb(0, kbd->io_base + STATUS_REG);
+	writel_relaxed(0, kbd->io_base + STATUS_REG);

 	return IRQ_HANDLED;
 }
@ -103,7 +104,7 @@ static int spear_kbd_open(struct input_dev *dev)
 {
 	struct spear_kbd *kbd = input_get_drvdata(dev);
 	int error;
-	u16 val;
+	u32 val;

 	kbd->last_key = KEY_RESERVED;

@ -111,16 +112,20 @@ static int spear_kbd_open(struct input_dev *dev)
 	if (error)
 		return error;

+	/* keyboard rate to be programmed is input clock (in MHz) - 1 */
+	val = clk_get_rate(kbd->clk) / 1000000 - 1;
+	val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT;
+
 	/* program keyboard */
-	val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK |
-		(kbd->mode << KEY_MATRIX_SHIFT);
-	writew(val, kbd->io_base + MODE_REG);
-	writeb(1, kbd->io_base + STATUS_REG);
+	val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val |
+		(kbd->mode << MODE_CTL_KEYNUM_SHIFT);
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+	writel_relaxed(1, kbd->io_base + STATUS_REG);

 	/* start key scan */
-	val = readw(kbd->io_base + MODE_REG);
-	val |= START_SCAN;
-	writew(val, kbd->io_base + MODE_REG);
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val |= MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);

 	return 0;
 }
@ -128,12 +133,12 @@ static int spear_kbd_open(struct input_dev *dev)
 static void spear_kbd_close(struct input_dev *dev)
 {
 	struct spear_kbd *kbd = input_get_drvdata(dev);
-	u16 val;
+	u32 val;

 	/* stop key scan */
-	val = readw(kbd->io_base + MODE_REG);
-	val &= ~START_SCAN;
-	writew(val, kbd->io_base + MODE_REG);
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val &= ~MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);

 	clk_disable(kbd->clk);

@ -146,7 +151,7 @@ static int __devinit spear_kbd_parse_dt(struct platform_device *pdev,
 {
 	struct device_node *np = pdev->dev.of_node;
 	int error;
-	u32 val;
+	u32 val, suspended_rate;

 	if (!np) {
 		dev_err(&pdev->dev, "Missing DT data\n");
@ -156,6 +161,9 @@ static int __devinit spear_kbd_parse_dt(struct platform_device *pdev,
 	if (of_property_read_bool(np, "autorepeat"))
 		kbd->rep = true;

+	if (of_property_read_u32(np, "suspended_rate", &suspended_rate))
+		kbd->suspended_rate = suspended_rate;
+
 	error = of_property_read_u32(np, "st,mode", &val);
 	if (error) {
 		dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
@ -213,6 +221,7 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
 	} else {
 		kbd->mode = pdata->mode;
 		kbd->rep = pdata->rep;
+		kbd->suspended_rate = pdata->suspended_rate;
 	}

 	kbd->res = request_mem_region(res->start, resource_size(res),
@ -302,7 +311,7 @@ static int __devexit spear_kbd_remove(struct platform_device *pdev)
 	release_mem_region(kbd->res->start, resource_size(kbd->res));
 	kfree(kbd);

-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(&pdev->dev, 0);
 	platform_set_drvdata(pdev, NULL);

 	return 0;
@ -314,15 +323,48 @@ static int spear_kbd_suspend(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct spear_kbd *kbd = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = kbd->input;
+	unsigned int rate = 0, mode_ctl_reg, val;

 	mutex_lock(&input_dev->mutex);

-	if (input_dev->users)
-		clk_enable(kbd->clk);
+	/* explicitly enable clock as we may program device */
+	clk_enable(kbd->clk);

-	if (device_may_wakeup(&pdev->dev))
+	mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+
+	if (device_may_wakeup(&pdev->dev)) {
 		enable_irq_wake(kbd->irq);

+		/*
+		 * reprogram the keyboard operating frequency as on some
+		 * platform it may change during system suspended
+		 */
+		if (kbd->suspended_rate)
+			rate = kbd->suspended_rate / 1000000 - 1;
+		else
+			rate = clk_get_rate(kbd->clk) / 1000000 - 1;
+
+		val = mode_ctl_reg &
+			~(MODE_CTL_PCLK_FREQ_MSK << MODE_CTL_PCLK_FREQ_SHIFT);
+		val |= (rate & MODE_CTL_PCLK_FREQ_MSK)
+			<< MODE_CTL_PCLK_FREQ_SHIFT;
+		writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	} else {
+		if (input_dev->users) {
+			writel_relaxed(mode_ctl_reg & ~MODE_CTL_START_SCAN,
+					kbd->io_base + MODE_CTL_REG);
+			clk_disable(kbd->clk);
+		}
+	}
+
+	/* store current configuration */
+	if (input_dev->users)
+		kbd->mode_ctl_reg = mode_ctl_reg;
+
+	/* restore previous clk state */
+	clk_disable(kbd->clk);
+
 	mutex_unlock(&input_dev->mutex);

 	return 0;
@ -336,11 +378,16 @@ static int spear_kbd_resume(struct device *dev)

 	mutex_lock(&input_dev->mutex);

-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(&pdev->dev)) {
 		disable_irq_wake(kbd->irq);
+	} else {
+		if (input_dev->users)
+			clk_enable(kbd->clk);
+	}

+	/* restore current configuration */
 	if (input_dev->users)
-		clk_enable(kbd->clk);
+		writel_relaxed(kbd->mode_ctl_reg, kbd->io_base + MODE_CTL_REG);

 	mutex_unlock(&input_dev->mutex);

--- a/drivers/input/misc/ab8500-ponkey.c
+++ b/drivers/input/misc/ab8500-ponkey.c
@ -13,6 +13,7 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/abx500/ab8500.h>
+#include <linux/of.h>
 #include <linux/slab.h>

 /**
@ -131,10 +132,18 @@ static int __devexit ab8500_ponkey_remove(struct platform_device *pdev)
 	return 0;
 }

+#ifdef CONFIG_OF
+static const struct of_device_id ab8500_ponkey_match[] = {
+	{ .compatible = "stericsson,ab8500-ponkey", },
+	{}
+};
+#endif
+
 static struct platform_driver ab8500_ponkey_driver = {
 	.driver		= {
 		.name	= "ab8500-poweron-key",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(ab8500_ponkey_match),
 	},
 	.probe		= ab8500_ponkey_probe,
 	.remove		= __devexit_p(ab8500_ponkey_remove),
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@ -251,7 +251,6 @@ static int twl6040_vibra_suspend(struct device *dev)

 	return 0;
 }
-
 #endif

 static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
@ -259,13 +258,19 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
 static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 {
 	struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
-	struct device_node *node = pdev->dev.of_node;
+	struct device *twl6040_core_dev = pdev->dev.parent;
+	struct device_node *twl6040_core_node = NULL;
 	struct vibra_info *info;
 	int vddvibl_uV = 0;
 	int vddvibr_uV = 0;
 	int ret;

-	if (!pdata && !node) {
+#ifdef CONFIG_OF
+	twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
+						 "vibra");
+#endif
+
+	if (!pdata && !twl6040_core_node) {
 		dev_err(&pdev->dev, "platform_data not available\n");
 		return -EINVAL;
 	}
@ -287,14 +292,18 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 		vddvibl_uV = pdata->vddvibl_uV;
 		vddvibr_uV = pdata->vddvibr_uV;
 	} else {
-		of_property_read_u32(node, "vibldrv_res", &info->vibldrv_res);
-		of_property_read_u32(node, "vibrdrv_res", &info->vibrdrv_res);
-		of_property_read_u32(node, "viblmotor_res",
+		of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
+				     &info->vibldrv_res);
+		of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
+				     &info->vibrdrv_res);
+		of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
 				     &info->viblmotor_res);
-		of_property_read_u32(node, "vibrmotor_res",
+		of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
 				     &info->vibrmotor_res);
-		of_property_read_u32(node, "vddvibl_uV", &vddvibl_uV);
-		of_property_read_u32(node, "vddvibr_uV", &vddvibr_uV);
+		of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV",
+				     &vddvibl_uV);
+		of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV",
+				     &vddvibr_uV);
 	}

 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
@ -351,8 +360,12 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)

 	info->supplies[0].supply = "vddvibl";
 	info->supplies[1].supply = "vddvibr";
-	ret = regulator_bulk_get(info->dev, ARRAY_SIZE(info->supplies),
-				 info->supplies);
+	/*
+	 * When booted with Device tree the regulators are attached to the
+	 * parent device (twl6040 MFD core)
+	 */
+	ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
+				 ARRAY_SIZE(info->supplies), info->supplies);
 	if (ret) {
 		dev_err(info->dev, "couldn't get regulators %d\n", ret);
 		goto err_regulator;
@ -418,12 +431,6 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
 	return 0;
 }

-static const struct of_device_id twl6040_vibra_of_match[] = {
-	{.compatible = "ti,twl6040-vibra", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, twl6040_vibra_of_match);
-
 static struct platform_driver twl6040_vibra_driver = {
 	.probe		= twl6040_vibra_probe,
 	.remove		= __devexit_p(twl6040_vibra_remove),
@ -431,7 +438,6 @@ static struct platform_driver twl6040_vibra_driver = {
 		.name	= "twl6040-vibra",
 		.owner	= THIS_MODULE,
 		.pm	= &twl6040_vibra_pm_ops,
-		.of_match_table = twl6040_vibra_of_match,
 	},
 };
 module_platform_driver(twl6040_vibra_driver);
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@ -138,6 +138,35 @@ static int synaptics_model_id(struct psmouse *psmouse)
 	return 0;
 }

+/*
+ * Read the board id from the touchpad
+ * The board id is encoded in the "QUERY MODES" response
+ */
+static int synaptics_board_id(struct psmouse *psmouse)
+{
+	struct synaptics_data *priv = psmouse->private;
+	unsigned char bid[3];
+
+	if (synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid))
+		return -1;
+	priv->board_id = ((bid[0] & 0xfc) << 6) | bid[1];
+	return 0;
+}
+
+/*
+ * Read the firmware id from the touchpad
+ */
+static int synaptics_firmware_id(struct psmouse *psmouse)
+{
+	struct synaptics_data *priv = psmouse->private;
+	unsigned char fwid[3];
+
+	if (synaptics_send_cmd(psmouse, SYN_QUE_FIRMWARE_ID, fwid))
+		return -1;
+	priv->firmware_id = (fwid[0] << 16) | (fwid[1] << 8) | fwid[2];
+	return 0;
+}
+
 /*
 * Read the capability-bits from the touchpad
 * see also the SYN_CAP_* macros
@ -261,6 +290,10 @@ static int synaptics_query_hardware(struct psmouse *psmouse)
 		return -1;
 	if (synaptics_model_id(psmouse))
 		return -1;
+	if (synaptics_firmware_id(psmouse))
+		return -1;
+	if (synaptics_board_id(psmouse))
+		return -1;
 	if (synaptics_capability(psmouse))
 		return -1;
 	if (synaptics_resolution(psmouse))
@ -1435,11 +1468,12 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;

 	psmouse_info(psmouse,
-		     "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
+		     "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx, board id: %lu, fw id: %lu\n",
 		     SYN_ID_MODEL(priv->identity),
 		     SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
 		     priv->model_id,
-		     priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
+		     priv->capabilities, priv->ext_cap, priv->ext_cap_0c,
+		     priv->board_id, priv->firmware_id);

 	set_input_params(psmouse->dev, priv);

--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@ -18,6 +18,7 @@
 #define SYN_QUE_SERIAL_NUMBER_SUFFIX	0x07
 #define SYN_QUE_RESOLUTION		0x08
 #define SYN_QUE_EXT_CAPAB		0x09
+#define SYN_QUE_FIRMWARE_ID		0x0a
 #define SYN_QUE_EXT_CAPAB_0C		0x0c
 #define SYN_QUE_EXT_MAX_COORDS		0x0d
 #define SYN_QUE_EXT_MIN_COORDS		0x0f
@ -148,6 +149,8 @@ struct synaptics_hw_state {
 struct synaptics_data {
 	/* Data read from the touchpad */
 	unsigned long int model_id;		/* Model-ID */
+	unsigned long int firmware_id;		/* Firmware-ID */
+	unsigned long int board_id;		/* Board-ID */
 	unsigned long int capabilities;		/* Capabilities */
 	unsigned long int ext_cap;		/* Extended Capabilities */
 	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
--- a/drivers/input/mouse/synaptics_usb.c
+++ b/drivers/input/mouse/synaptics_usb.c
@ -364,7 +364,7 @@ static int synusb_probe(struct usb_interface *intf,
 			 le16_to_cpu(udev->descriptor.idProduct));

 	if (synusb->flags & SYNUSB_STICK)
-		strlcat(synusb->name, " (Stick) ", sizeof(synusb->name));
+		strlcat(synusb->name, " (Stick)", sizeof(synusb->name));

 	usb_make_path(udev, synusb->phys, sizeof(synusb->phys));
 	strlcat(synusb->phys, "/input0", sizeof(synusb->phys));
--- a/drivers/input/tablet/hanwang.c
+++ b/drivers/input/tablet/hanwang.c
@ -63,6 +63,7 @@ MODULE_LICENSE(DRIVER_LICENSE);
 enum hanwang_tablet_type {
 	HANWANG_ART_MASTER_III,
 	HANWANG_ART_MASTER_HD,
+	HANWANG_ART_MASTER_II,
 };

 struct hanwang {
@ -99,6 +100,8 @@ static const struct hanwang_features features_array[] = {
 	  ART_MASTER_PKGLEN_MAX, 0x7f00, 0x4f60, 0x3f, 0x7f, 2048 },
 	{ 0x8401, "Hanwang Art Master HD 5012", HANWANG_ART_MASTER_HD,
 	  ART_MASTER_PKGLEN_MAX, 0x678e, 0x4150, 0x3f, 0x7f, 1024 },
+	{ 0x8503, "Hanwang Art Master II", HANWANG_ART_MASTER_II,
+	  ART_MASTER_PKGLEN_MAX, 0x27de, 0x1cfe, 0x3f, 0x7f, 1024 },
 };

 static const int hw_eventtypes[] = {
@ -127,14 +130,30 @@ static void hanwang_parse_packet(struct hanwang *hanwang)
 	struct usb_device *dev = hanwang->usbdev;
 	enum hanwang_tablet_type type = hanwang->features->type;
 	int i;
-	u16 x, y, p;
+	u16 p;
+
+	if (type == HANWANG_ART_MASTER_II) {
+		hanwang->current_tool = BTN_TOOL_PEN;
+		hanwang->current_id = STYLUS_DEVICE_ID;
+	}

 	switch (data[0]) {
 	case 0x02:	/* data packet */
 		switch (data[1]) {
 		case 0x80:	/* tool prox out */
-			hanwang->current_id = 0;
-			input_report_key(input_dev, hanwang->current_tool, 0);
+			if (type != HANWANG_ART_MASTER_II) {
+				hanwang->current_id = 0;
+				input_report_key(input_dev,
+						 hanwang->current_tool, 0);
+			}
+			break;
+
+		case 0x00:	/* artmaster ii pen leave */
+			if (type == HANWANG_ART_MASTER_II) {
+				hanwang->current_id = 0;
+				input_report_key(input_dev,
+						 hanwang->current_tool, 0);
+			}
 			break;

 		case 0xc2:	/* first time tool prox in */
@ -154,15 +173,12 @@ static void hanwang_parse_packet(struct hanwang *hanwang)
 			default:
 				hanwang->current_id = 0;
 				dev_dbg(&dev->dev,
-					"unknown tablet tool %02x ", data[0]);
+					"unknown tablet tool %02x\n", data[0]);
 				break;
 			}
 			break;

 		default:	/* tool data packet */
-			x = (data[2] << 8) | data[3];
-			y = (data[4] << 8) | data[5];
-
 			switch (type) {
 			case HANWANG_ART_MASTER_III:
 				p = (data[6] << 3) |
@ -171,6 +187,7 @@ static void hanwang_parse_packet(struct hanwang *hanwang)
 				break;

 			case HANWANG_ART_MASTER_HD:
+			case HANWANG_ART_MASTER_II:
 				p = (data[7] >> 6) | (data[6] << 2);
 				break;

@ -180,17 +197,23 @@ static void hanwang_parse_packet(struct hanwang *hanwang)
 			}

 			input_report_abs(input_dev, ABS_X,
-						le16_to_cpup((__le16 *)&x));
+					 be16_to_cpup((__be16 *)&data[2]));
 			input_report_abs(input_dev, ABS_Y,
-						le16_to_cpup((__le16 *)&y));
-			input_report_abs(input_dev, ABS_PRESSURE,
-						le16_to_cpup((__le16 *)&p));
+					 be16_to_cpup((__be16 *)&data[4]));
+			input_report_abs(input_dev, ABS_PRESSURE, p);
 			input_report_abs(input_dev, ABS_TILT_X, data[7] & 0x3f);
 			input_report_abs(input_dev, ABS_TILT_Y, data[8] & 0x7f);
 			input_report_key(input_dev, BTN_STYLUS, data[1] & 0x02);
-			input_report_key(input_dev, BTN_STYLUS2, data[1] & 0x04);
+
+			if (type != HANWANG_ART_MASTER_II)
+				input_report_key(input_dev, BTN_STYLUS2,
+						 data[1] & 0x04);
+			else
+				input_report_key(input_dev, BTN_TOOL_PEN, 1);
+
 			break;
 		}
+
 		input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
 		input_event(input_dev, EV_MSC, MSC_SERIAL,
 				hanwang->features->pid);
@ -202,8 +225,8 @@ static void hanwang_parse_packet(struct hanwang *hanwang)

 		switch (type) {
 		case HANWANG_ART_MASTER_III:
-			input_report_key(input_dev, BTN_TOOL_FINGER, data[1] ||
-							data[2] || data[3]);
+			input_report_key(input_dev, BTN_TOOL_FINGER,
+					 data[1] || data[2] || data[3]);
 			input_report_abs(input_dev, ABS_WHEEL, data[1]);
 			input_report_key(input_dev, BTN_0, data[2]);
 			for (i = 0; i < 8; i++)
@ -227,6 +250,10 @@ static void hanwang_parse_packet(struct hanwang *hanwang)
 					 BTN_5 + i, data[6] & (1 << i));
 			}
 			break;
+
+		case HANWANG_ART_MASTER_II:
+			dev_dbg(&dev->dev, "error packet  %02x\n", data[0]);
+			return;
 		}

 		input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
@ -234,7 +261,7 @@ static void hanwang_parse_packet(struct hanwang *hanwang)
 		break;

 	default:
-		dev_dbg(&dev->dev, "error packet  %02x ", data[0]);
+		dev_dbg(&dev->dev, "error packet  %02x\n", data[0]);
 		break;
 	}

--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@ -445,8 +445,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
 	/* ask to report Wacom data */
 	if (features->device_type == BTN_TOOL_FINGER) {
 		/* if it is an MT Tablet PC touch */
-		if (features->type == TABLETPC2FG ||
-		    features->type == MTSCREEN) {
+		if (features->type > TABLETPC) {
 			do {
 				rep_data[0] = 3;
 				rep_data[1] = 4;
@ -465,7 +464,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
 			} while ((error < 0 || rep_data[1] != 4) &&
 				 limit++ < WAC_MSG_RETRIES);
 		}
-	} else if (features->type != TABLETPC &&
+	} else if (features->type <= BAMBOO_PT &&
 		   features->type != WIRELESS &&
 		   features->device_type == BTN_TOOL_PEN) {
 		do {
@ -509,16 +508,13 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 		if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
 			features->device_type = 0;
 		} else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) {
-			features->device_type = BTN_TOOL_DOUBLETAP;
+			features->device_type = BTN_TOOL_FINGER;
 			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
 		}
 	}

 	/* only devices that support touch need to retrieve the info */
-	if (features->type != TABLETPC &&
-	    features->type != TABLETPC2FG &&
-	    features->type != BAMBOO_PT &&
-	    features->type != MTSCREEN) {
+	if (features->type < BAMBOO_PT) {
 		goto out;
 	}

@ -860,6 +856,7 @@ static int wacom_initialize_leds(struct wacom *wacom)

 	/* Initialize default values */
 	switch (wacom->wacom_wac.features.type) {
+	case INTUOS4S:
 	case INTUOS4:
 	case INTUOS4L:
 		wacom->led.select[0] = 0;
@ -913,6 +910,7 @@ static int wacom_initialize_leds(struct wacom *wacom)
 static void wacom_destroy_leds(struct wacom *wacom)
 {
 	switch (wacom->wacom_wac.features.type) {
+	case INTUOS4S:
 	case INTUOS4:
 	case INTUOS4L:
 		sysfs_remove_group(&wacom->intf->dev.kobj,
@ -972,6 +970,10 @@ static int wacom_initialize_battery(struct wacom *wacom)

 		error = power_supply_register(&wacom->usbdev->dev,
 					      &wacom->battery);
+
+		if (!error)
+			power_supply_powers(&wacom->battery,
+					    &wacom->usbdev->dev);
 	}

 	return error;
@ -979,8 +981,11 @@ static int wacom_initialize_battery(struct wacom *wacom)

 static void wacom_destroy_battery(struct wacom *wacom)
 {
-	if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR)
+	if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR &&
+	    wacom->battery.dev) {
 		power_supply_unregister(&wacom->battery);
+		wacom->battery.dev = NULL;
+	}
 }

 static int wacom_register_input(struct wacom *wacom)
@ -1027,23 +1032,30 @@ static void wacom_wireless_work(struct work_struct *work)
 	struct wacom *wacom = container_of(work, struct wacom, work);
 	struct usb_device *usbdev = wacom->usbdev;
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+	struct wacom *wacom1, *wacom2;
+	struct wacom_wac *wacom_wac1, *wacom_wac2;
+	int error;

 	/*
 	 * Regardless if this is a disconnect or a new tablet,
-	 * remove any existing input devices.
+	 * remove any existing input and battery devices.
 	 */

+	wacom_destroy_battery(wacom);
+
 	/* Stylus interface */
-	wacom = usb_get_intfdata(usbdev->config->interface[1]);
-	if (wacom->wacom_wac.input)
-		input_unregister_device(wacom->wacom_wac.input);
-	wacom->wacom_wac.input = NULL;
+	wacom1 = usb_get_intfdata(usbdev->config->interface[1]);
+	wacom_wac1 = &(wacom1->wacom_wac);
+	if (wacom_wac1->input)
+		input_unregister_device(wacom_wac1->input);
+	wacom_wac1->input = NULL;

 	/* Touch interface */
-	wacom = usb_get_intfdata(usbdev->config->interface[2]);
-	if (wacom->wacom_wac.input)
-		input_unregister_device(wacom->wacom_wac.input);
-	wacom->wacom_wac.input = NULL;
+	wacom2 = usb_get_intfdata(usbdev->config->interface[2]);
+	wacom_wac2 = &(wacom2->wacom_wac);
+	if (wacom_wac2->input)
+		input_unregister_device(wacom_wac2->input);
+	wacom_wac2->input = NULL;

 	if (wacom_wac->pid == 0) {
 		dev_info(&wacom->intf->dev, "wireless tablet disconnected\n");
@ -1068,24 +1080,39 @@ static void wacom_wireless_work(struct work_struct *work)
 		}

 		/* Stylus interface */
-		wacom = usb_get_intfdata(usbdev->config->interface[1]);
-		wacom_wac = &wacom->wacom_wac;
-		wacom_wac->features =
+		wacom_wac1->features =
 			*((struct wacom_features *)id->driver_info);
-		wacom_wac->features.device_type = BTN_TOOL_PEN;
-		wacom_register_input(wacom);
+		wacom_wac1->features.device_type = BTN_TOOL_PEN;
+		error = wacom_register_input(wacom1);
+		if (error)
+			goto fail1;

 		/* Touch interface */
-		wacom = usb_get_intfdata(usbdev->config->interface[2]);
-		wacom_wac = &wacom->wacom_wac;
-		wacom_wac->features =
+		wacom_wac2->features =
 			*((struct wacom_features *)id->driver_info);
-		wacom_wac->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
-		wacom_wac->features.device_type = BTN_TOOL_FINGER;
-		wacom_set_phy_from_res(&wacom_wac->features);
-		wacom_wac->features.x_max = wacom_wac->features.y_max = 4096;
-		wacom_register_input(wacom);
+		wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
+		wacom_wac2->features.device_type = BTN_TOOL_FINGER;
+		wacom_set_phy_from_res(&wacom_wac2->features);
+		wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
+		error = wacom_register_input(wacom2);
+		if (error)
+			goto fail2;
+
+		error = wacom_initialize_battery(wacom);
+		if (error)
+			goto fail3;
 	}
+
+	return;
+
+fail3:
+	input_unregister_device(wacom_wac2->input);
+	wacom_wac2->input = NULL;
+fail2:
+	input_unregister_device(wacom_wac1->input);
+	wacom_wac1->input = NULL;
+fail1:
+	return;
 }

 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
@ -1149,10 +1176,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 			features->device_type = BTN_TOOL_FINGER;
 			features->pktlen = WACOM_PKGLEN_BBTOUCH3;

-			features->x_phy =
-				(features->x_max * 100) / features->x_resolution;
-			features->y_phy =
-				(features->y_max * 100) / features->y_resolution;
+			wacom_set_phy_from_res(features);

 			features->x_max = 4096;
 			features->y_max = 4096;
@ -1188,14 +1212,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (error)
 		goto fail4;

-	error = wacom_initialize_battery(wacom);
-	if (error)
-		goto fail5;
-
 	if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) {
 		error = wacom_register_input(wacom);
 		if (error)
-			goto fail6;
+			goto fail5;
 	}

 	/* Note that if query fails it is not a hard failure */
@ -1210,7 +1230,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i

 	return 0;

- fail6: wacom_destroy_battery(wacom);
 fail5: wacom_destroy_leds(wacom);
 fail4:	wacom_remove_shared_data(wacom_wac);
 fail3:	usb_free_urb(wacom->irq);
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@ -248,7 +248,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 		input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
 		input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
 		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
-			input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
+			input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8));
 			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
 			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
 			input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
@ -888,7 +888,7 @@ static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
 			prox = data[0] & 0x01;
 			x = get_unaligned_le16(&data[1]);
 			y = get_unaligned_le16(&data[3]);
-		} else { /* with capacity */
+		} else {
 			prox = data[1] & 0x01;
 			x = le16_to_cpup((__le16 *)&data[2]);
 			y = le16_to_cpup((__le16 *)&data[4]);
@ -961,6 +961,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 		case WACOM_REPORT_TPC1FG:
 		case WACOM_REPORT_TPCHID:
 		case WACOM_REPORT_TPCST:
+		case WACOM_REPORT_TPC1FGE:
 			return wacom_tpc_single_touch(wacom, len);

 		case WACOM_REPORT_TPCMT:
@ -1244,6 +1245,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		break;

 	case TABLETPC:
+	case TABLETPCE:
 	case TABLETPC2FG:
 	case MTSCREEN:
 		sync = wacom_tpc_irq(wacom_wac, len);
@ -1317,10 +1319,8 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 	}

 	/* these device have multiple inputs */
-	if (features->type == TABLETPC || features->type == TABLETPC2FG ||
-	    features->type == BAMBOO_PT || features->type == WIRELESS ||
-	    (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
-	    features->type == MTSCREEN)
+	if (features->type >= WIRELESS ||
+	    (features->type >= INTUOS5S && features->type <= INTUOS5L))
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;

 	/* quirk for bamboo touch with 2 low res touches */
@ -1547,10 +1547,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 		break;

-	case TABLETPC2FG:
 	case MTSCREEN:
 		if (features->device_type == BTN_TOOL_FINGER) {
-
 			wacom_wac->slots = kmalloc(features->touch_max *
 							sizeof(int),
 						   GFP_KERNEL);
@ -1559,7 +1557,11 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,

 			for (i = 0; i < features->touch_max; i++)
 				wacom_wac->slots[i] = -1;
+		}
+		/* fall through */

+	case TABLETPC2FG:
+		if (features->device_type == BTN_TOOL_FINGER) {
 			input_mt_init_slots(input_dev, features->touch_max);
 			input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
 					0, MT_TOOL_MAX, 0, 0);
@ -1571,6 +1573,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		/* fall through */

 	case TABLETPC:
+	case TABLETPCE:
 		__clear_bit(ABS_MISC, input_dev->absbit);

 		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
@ -1888,6 +1891,12 @@ static const struct wacom_features wacom_features_0xE6 =
 static const struct wacom_features wacom_features_0xEC =
 	{ "Wacom ISDv4 EC",       WACOM_PKGLEN_GRAPHIRE,  25710, 14500,  255,
 	  0, TABLETPC,    WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xED =
+	{ "Wacom ISDv4 ED",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xEF =
+	{ "Wacom ISDv4 EF",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x47 =
 	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@ -2062,6 +2071,8 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xE5) },
 	{ USB_DEVICE_WACOM(0xE6) },
 	{ USB_DEVICE_WACOM(0xEC) },
+	{ USB_DEVICE_WACOM(0xED) },
+	{ USB_DEVICE_WACOM(0xEF) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_WACOM(0xF4) },
 	{ USB_DEVICE_LENOVO(0x6004) },
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@ -48,6 +48,7 @@
 #define WACOM_REPORT_TPCMT		13
 #define WACOM_REPORT_TPCHID		15
 #define WACOM_REPORT_TPCST		16
+#define WACOM_REPORT_TPC1FGE		18

 /* device quirks */
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
@ -62,8 +63,6 @@ enum {
 	PTU,
 	PL,
 	DTU,
-	BAMBOO_PT,
-	WIRELESS,
 	INTUOS,
 	INTUOS3S,
 	INTUOS3,
@ -79,7 +78,10 @@ enum {
 	CINTIQ,
 	WACOM_BEE,
 	WACOM_MO,
-	TABLETPC,
+	WIRELESS,
+	BAMBOO_PT,
+	TABLETPC,   /* add new TPC below */
+	TABLETPCE,
 	TABLETPC2FG,
 	MTSCREEN,
 	MAX_TYPE
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@ -369,6 +369,18 @@ config TOUCHSCREEN_MCS5000
 	  To compile this driver as a module, choose M here: the
 	  module will be called mcs5000_ts.

+config TOUCHSCREEN_MMS114
+	tristate "MELFAS MMS114 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MMS114 touchscreen controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mms114.
+
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"
 	select SERIO
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@ -38,6 +38,7 @@ obj-$(CONFIG_TOUCHSCREEN_MAX11801)	+= max11801_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MCS5000)	+= mcs5000_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MIGOR)		+= migor_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MMS114)	+= mms114.o
 obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
 obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@ -118,6 +118,7 @@ struct ad7879 {
 	unsigned int		irq;
 	bool			disabled;	/* P: input->mutex */
 	bool			suspended;	/* P: input->mutex */
+	bool			swap_xy;
 	u16			conversion_data[AD7879_NR_SENSE];
 	char			phys[32];
 	u8			first_conversion_delay;
@ -161,6 +162,9 @@ static int ad7879_report(struct ad7879 *ts)
 	z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT;
 	z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT;

+	if (ts->swap_xy)
+		swap(x, y);
+
 	/*
 	 * The samples processed here are already preprocessed by the AD7879.
 	 * The preprocessing function consists of a median and an averaging
@ -520,6 +524,7 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
 	ts->dev = dev;
 	ts->input = input_dev;
 	ts->irq = irq;
+	ts->swap_xy = pdata->swap_xy;

 	setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);

--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@ -36,6 +36,7 @@
 #define MXT_FW_NAME		"maxtouch.fw"

 /* Registers */
+#define MXT_INFO		0x00
 #define MXT_FAMILY_ID		0x00
 #define MXT_VARIANT_ID		0x01
 #define MXT_VERSION		0x02
@ -194,6 +195,7 @@
 #define MXT_BOOT_STATUS_MASK	0x3f

 /* Touch status */
+#define MXT_UNGRIP		(1 << 0)
 #define MXT_SUPPRESS		(1 << 1)
 #define MXT_AMP			(1 << 2)
 #define MXT_VECTOR		(1 << 3)
@ -210,8 +212,6 @@
 /* Touchscreen absolute values */
 #define MXT_MAX_AREA		0xff

-#define MXT_MAX_FINGER		10
-
 struct mxt_info {
 	u8 family_id;
 	u8 variant_id;
@ -225,44 +225,37 @@ struct mxt_info {
 struct mxt_object {
 	u8 type;
 	u16 start_address;
-	u8 size;
-	u8 instances;
+	u8 size;		/* Size of each instance - 1 */
+	u8 instances;		/* Number of instances - 1 */
 	u8 num_report_ids;
-
-	/* to map object and message */
-	u8 max_reportid;
-};
+} __packed;

 struct mxt_message {
 	u8 reportid;
 	u8 message[7];
 };

-struct mxt_finger {
-	int status;
-	int x;
-	int y;
-	int area;
-	int pressure;
-};
-
 /* Each client has this additional data */
 struct mxt_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
+	char phys[64];		/* device physical location */
 	const struct mxt_platform_data *pdata;
 	struct mxt_object *object_table;
 	struct mxt_info info;
-	struct mxt_finger finger[MXT_MAX_FINGER];
 	unsigned int irq;
 	unsigned int max_x;
 	unsigned int max_y;
+
+	/* Cached parameters from object table */
+	u8 T6_reportid;
+	u8 T9_reportid_min;
+	u8 T9_reportid_max;
 };

 static bool mxt_object_readable(unsigned int type)
 {
 	switch (type) {
-	case MXT_GEN_MESSAGE_T5:
 	case MXT_GEN_COMMAND_T6:
 	case MXT_GEN_POWER_T7:
 	case MXT_GEN_ACQUIRE_T8:
@ -396,6 +389,7 @@ static int __mxt_read_reg(struct i2c_client *client,
 {
 	struct i2c_msg xfer[2];
 	u8 buf[2];
+	int ret;

 	buf[0] = reg & 0xff;
 	buf[1] = (reg >> 8) & 0xff;
@ -412,12 +406,17 @@ static int __mxt_read_reg(struct i2c_client *client,
 	xfer[1].len = len;
 	xfer[1].buf = val;

-	if (i2c_transfer(client->adapter, xfer, 2) != 2) {
-		dev_err(&client->dev, "%s: i2c transfer failed\n", __func__);
-		return -EIO;
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret == 2) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+			__func__, ret);
 	}

-	return 0;
+	return ret;
 }

 static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
@ -425,27 +424,39 @@ static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
 	return __mxt_read_reg(client, reg, 1, val);
 }

-static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
+static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
+			   const void *val)
 {
-	u8 buf[3];
+	u8 *buf;
+	size_t count;
+	int ret;
+
+	count = len + 2;
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;

 	buf[0] = reg & 0xff;
 	buf[1] = (reg >> 8) & 0xff;
-	buf[2] = val;
+	memcpy(&buf[2], val, len);

-	if (i2c_master_send(client, buf, 3) != 3) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
+	ret = i2c_master_send(client, buf, count);
+	if (ret == count) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
 	}

-	return 0;
+	kfree(buf);
+	return ret;
 }

-static int mxt_read_object_table(struct i2c_client *client,
-				      u16 reg, u8 *object_buf)
+static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
 {
-	return __mxt_read_reg(client, reg, MXT_OBJECT_SIZE,
-				   object_buf);
+	return __mxt_write_reg(client, reg, 1, &val);
 }

 static struct mxt_object *
@ -479,20 +490,6 @@ static int mxt_read_message(struct mxt_data *data,
 			sizeof(struct mxt_message), message);
 }

-static int mxt_read_object(struct mxt_data *data,
-				u8 type, u8 offset, u8 *val)
-{
-	struct mxt_object *object;
-	u16 reg;
-
-	object = mxt_get_object(data, type);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __mxt_read_reg(data->client, reg + offset, 1, val);
-}
-
 static int mxt_write_object(struct mxt_data *data,
 				 u8 type, u8 offset, u8 val)
 {
@ -507,75 +504,17 @@ static int mxt_write_object(struct mxt_data *data,
 	return mxt_write_reg(data->client, reg + offset, val);
 }

-static void mxt_input_report(struct mxt_data *data, int single_id)
-{
-	struct mxt_finger *finger = data->finger;
-	struct input_dev *input_dev = data->input_dev;
-	int status = finger[single_id].status;
-	int finger_num = 0;
-	int id;
-
-	for (id = 0; id < MXT_MAX_FINGER; id++) {
-		if (!finger[id].status)
-			continue;
-
-		input_mt_slot(input_dev, id);
-		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
-				finger[id].status != MXT_RELEASE);
-
-		if (finger[id].status != MXT_RELEASE) {
-			finger_num++;
-			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
-					finger[id].area);
-			input_report_abs(input_dev, ABS_MT_POSITION_X,
-					finger[id].x);
-			input_report_abs(input_dev, ABS_MT_POSITION_Y,
-					finger[id].y);
-			input_report_abs(input_dev, ABS_MT_PRESSURE,
-					finger[id].pressure);
-		} else {
-			finger[id].status = 0;
-		}
-	}
-
-	input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
-
-	if (status != MXT_RELEASE) {
-		input_report_abs(input_dev, ABS_X, finger[single_id].x);
-		input_report_abs(input_dev, ABS_Y, finger[single_id].y);
-		input_report_abs(input_dev,
-				 ABS_PRESSURE, finger[single_id].pressure);
-	}
-
-	input_sync(input_dev);
-}
-
 static void mxt_input_touchevent(struct mxt_data *data,
 				      struct mxt_message *message, int id)
 {
-	struct mxt_finger *finger = data->finger;
 	struct device *dev = &data->client->dev;
 	u8 status = message->message[0];
+	struct input_dev *input_dev = data->input_dev;
 	int x;
 	int y;
 	int area;
 	int pressure;

-	/* Check the touch is present on the screen */
-	if (!(status & MXT_DETECT)) {
-		if (status & MXT_RELEASE) {
-			dev_dbg(dev, "[%d] released\n", id);
-
-			finger[id].status = MXT_RELEASE;
-			mxt_input_report(data, id);
-		}
-		return;
-	}
-
-	/* Check only AMP detection */
-	if (!(status & (MXT_PRESS | MXT_MOVE)))
-		return;
-
 	x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
 	y = (message->message[2] << 4) | ((message->message[3] & 0xf));
 	if (data->max_x < 1024)
@ -586,30 +525,50 @@ static void mxt_input_touchevent(struct mxt_data *data,
 	area = message->message[4];
 	pressure = message->message[5];

-	dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
-		status & MXT_MOVE ? "moved" : "pressed",
-		x, y, area);
+	dev_dbg(dev,
+		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+		id,
+		(status & MXT_DETECT) ? 'D' : '.',
+		(status & MXT_PRESS) ? 'P' : '.',
+		(status & MXT_RELEASE) ? 'R' : '.',
+		(status & MXT_MOVE) ? 'M' : '.',
+		(status & MXT_VECTOR) ? 'V' : '.',
+		(status & MXT_AMP) ? 'A' : '.',
+		(status & MXT_SUPPRESS) ? 'S' : '.',
+		(status & MXT_UNGRIP) ? 'U' : '.',
+		x, y, area, pressure);

-	finger[id].status = status & MXT_MOVE ?
-				MXT_MOVE : MXT_PRESS;
-	finger[id].x = x;
-	finger[id].y = y;
-	finger[id].area = area;
-	finger[id].pressure = pressure;
+	input_mt_slot(input_dev, id);
+	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+				   status & MXT_DETECT);

-	mxt_input_report(data, id);
+	if (status & MXT_DETECT) {
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+	}
+}
+
+static unsigned mxt_extract_T6_csum(const u8 *csum)
+{
+	return csum[0] | (csum[1] << 8) | (csum[2] << 16);
+}
+
+static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
+{
+	u8 id = msg->reportid;
+	return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
 }

 static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 {
 	struct mxt_data *data = dev_id;
 	struct mxt_message message;
-	struct mxt_object *object;
+	const u8 *payload = &message.message[0];
 	struct device *dev = &data->client->dev;
-	int id;
 	u8 reportid;
-	u8 max_reportid;
-	u8 min_reportid;
+	bool update_input = false;

 	do {
 		if (mxt_read_message(data, &message)) {
@ -619,21 +578,25 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)

 		reportid = message.reportid;

-		/* whether reportid is thing of MXT_TOUCH_MULTI_T9 */
-		object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
-		if (!object)
-			goto end;
-
-		max_reportid = object->max_reportid;
-		min_reportid = max_reportid - object->num_report_ids + 1;
-		id = reportid - min_reportid;
-
-		if (reportid >= min_reportid && reportid <= max_reportid)
+		if (reportid == data->T6_reportid) {
+			u8 status = payload[0];
+			unsigned csum = mxt_extract_T6_csum(&payload[1]);
+			dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
+				status, csum);
+		} else if (mxt_is_T9_message(data, &message)) {
+			int id = reportid - data->T9_reportid_min;
 			mxt_input_touchevent(data, &message, id);
-		else
+			update_input = true;
+		} else {
 			mxt_dump_message(dev, &message);
+		}
 	} while (reportid != 0xff);

+	if (update_input) {
+		input_mt_report_pointer_emulation(data->input_dev, false);
+		input_sync(data->input_dev);
+	}
+
 end:
 	return IRQ_HANDLED;
 }
@ -644,7 +607,8 @@ static int mxt_check_reg_init(struct mxt_data *data)
 	struct mxt_object *object;
 	struct device *dev = &data->client->dev;
 	int index = 0;
-	int i, j, config_offset;
+	int i, size;
+	int ret;

 	if (!pdata->config) {
 		dev_dbg(dev, "No cfg data defined, skipping reg init\n");
@ -657,18 +621,17 @@ static int mxt_check_reg_init(struct mxt_data *data)
 		if (!mxt_object_writable(object->type))
 			continue;

-		for (j = 0;
-		     j < (object->size + 1) * (object->instances + 1);
-		     j++) {
-			config_offset = index + j;
-			if (config_offset > pdata->config_length) {
-				dev_err(dev, "Not enough config data!\n");
-				return -EINVAL;
-			}
-			mxt_write_object(data, object->type, j,
-					 pdata->config[config_offset]);
+		size = (object->size + 1) * (object->instances + 1);
+		if (index + size > pdata->config_length) {
+			dev_err(dev, "Not enough config data!\n");
+			return -EINVAL;
 		}
-		index += (object->size + 1) * (object->instances + 1);
+
+		ret = __mxt_write_reg(data->client, object->start_address,
+				size, &pdata->config[index]);
+		if (ret)
+			return ret;
+		index += size;
 	}

 	return 0;
@ -749,68 +712,76 @@ static int mxt_get_info(struct mxt_data *data)
 	struct i2c_client *client = data->client;
 	struct mxt_info *info = &data->info;
 	int error;
-	u8 val;

-	error = mxt_read_reg(client, MXT_FAMILY_ID, &val);
+	/* Read 7-byte info block starting at address 0 */
+	error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
 	if (error)
 		return error;
-	info->family_id = val;
-
-	error = mxt_read_reg(client, MXT_VARIANT_ID, &val);
-	if (error)
-		return error;
-	info->variant_id = val;
-
-	error = mxt_read_reg(client, MXT_VERSION, &val);
-	if (error)
-		return error;
-	info->version = val;
-
-	error = mxt_read_reg(client, MXT_BUILD, &val);
-	if (error)
-		return error;
-	info->build = val;
-
-	error = mxt_read_reg(client, MXT_OBJECT_NUM, &val);
-	if (error)
-		return error;
-	info->object_num = val;

 	return 0;
 }

 static int mxt_get_object_table(struct mxt_data *data)
 {
+	struct i2c_client *client = data->client;
+	size_t table_size;
 	int error;
 	int i;
-	u16 reg;
-	u8 reportid = 0;
-	u8 buf[MXT_OBJECT_SIZE];
+	u8 reportid;

+	table_size = data->info.object_num * sizeof(struct mxt_object);
+	error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
+			data->object_table);
+	if (error)
+		return error;
+
+	/* Valid Report IDs start counting from 1 */
+	reportid = 1;
 	for (i = 0; i < data->info.object_num; i++) {
 		struct mxt_object *object = data->object_table + i;
+		u8 min_id, max_id;

-		reg = MXT_OBJECT_START + MXT_OBJECT_SIZE * i;
-		error = mxt_read_object_table(data->client, reg, buf);
-		if (error)
-			return error;
-
-		object->type = buf[0];
-		object->start_address = (buf[2] << 8) | buf[1];
-		object->size = buf[3];
-		object->instances = buf[4];
-		object->num_report_ids = buf[5];
+		le16_to_cpus(&object->start_address);

 		if (object->num_report_ids) {
+			min_id = reportid;
 			reportid += object->num_report_ids *
 					(object->instances + 1);
-			object->max_reportid = reportid;
+			max_id = reportid - 1;
+		} else {
+			min_id = 0;
+			max_id = 0;
+		}
+
+		dev_dbg(&data->client->dev,
+			"Type %2d Start %3d Size %3d Instances %2d ReportIDs %3u : %3u\n",
+			object->type, object->start_address, object->size + 1,
+			object->instances + 1, min_id, max_id);
+
+		switch (object->type) {
+		case MXT_GEN_COMMAND_T6:
+			data->T6_reportid = min_id;
+			break;
+		case MXT_TOUCH_MULTI_T9:
+			data->T9_reportid_min = min_id;
+			data->T9_reportid_max = max_id;
+			break;
 		}
 	}

 	return 0;
 }

+static void mxt_free_object_table(struct mxt_data *data)
+{
+	kfree(data->object_table);
+	data->object_table = NULL;
+	data->T6_reportid = 0;
+	data->T9_reportid_min = 0;
+	data->T9_reportid_max = 0;
+
+}
+
 static int mxt_initialize(struct mxt_data *data)
 {
 	struct i2c_client *client = data->client;
@ -833,12 +804,12 @@ static int mxt_initialize(struct mxt_data *data)
 	/* Get object table information */
 	error = mxt_get_object_table(data);
 	if (error)
-		return error;
+		goto err_free_object_table;

 	/* Check register init values */
 	error = mxt_check_reg_init(data);
 	if (error)
-		return error;
+		goto err_free_object_table;

 	mxt_handle_pdata(data);

@ -856,25 +827,29 @@ static int mxt_initialize(struct mxt_data *data)
 	/* Update matrix size at info struct */
 	error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
 	if (error)
-		return error;
+		goto err_free_object_table;
 	info->matrix_xsize = val;

 	error = mxt_read_reg(client, MXT_MATRIX_Y_SIZE, &val);
 	if (error)
-		return error;
+		goto err_free_object_table;
 	info->matrix_ysize = val;

 	dev_info(&client->dev,
-			"Family ID: %d Variant ID: %d Version: %d Build: %d\n",
-			info->family_id, info->variant_id, info->version,
-			info->build);
+			"Family ID: %u Variant ID: %u Major.Minor.Build: %u.%u.%02X\n",
+			info->family_id, info->variant_id, info->version >> 4,
+			info->version & 0xf, info->build);

 	dev_info(&client->dev,
-			"Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n",
+			"Matrix X Size: %u Matrix Y Size: %u Object Num: %u\n",
 			info->matrix_xsize, info->matrix_ysize,
 			info->object_num);

 	return 0;
+
+err_free_object_table:
+	mxt_free_object_table(data);
+	return error;
 }

 static void mxt_calc_resolution(struct mxt_data *data)
@ -891,6 +866,44 @@ static void mxt_calc_resolution(struct mxt_data *data)
 	}
 }

+/* Firmware Version is returned as Major.Minor.Build */
+static ssize_t mxt_fw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
+			 info->version >> 4, info->version & 0xf, info->build);
+}
+
+/* Hardware Version is returned as FamilyID.VariantID */
+static ssize_t mxt_hw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
+			 info->family_id, info->variant_id);
+}
+
+static ssize_t mxt_show_instance(char *buf, int count,
+				 struct mxt_object *object, int instance,
+				 const u8 *val)
+{
+	int i;
+
+	if (object->instances > 0)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Instance %u\n", instance);
+
+	for (i = 0; i < object->size + 1; i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+
+	return count;
+}
+
 static ssize_t mxt_object_show(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
@ -899,43 +912,38 @@ static ssize_t mxt_object_show(struct device *dev,
 	int count = 0;
 	int i, j;
 	int error;
-	u8 val;
+	u8 *obuf;

+	/* Pre-allocate buffer large enough to hold max sized object. */
+	obuf = kmalloc(256, GFP_KERNEL);
+	if (!obuf)
+		return -ENOMEM;
+
+	error = 0;
 	for (i = 0; i < data->info.object_num; i++) {
 		object = data->object_table + i;

-		count += snprintf(buf + count, PAGE_SIZE - count,
-				"Object[%d] (Type %d)\n",
-				i + 1, object->type);
-		if (count >= PAGE_SIZE)
-			return PAGE_SIZE - 1;
-
-		if (!mxt_object_readable(object->type)) {
-			count += snprintf(buf + count, PAGE_SIZE - count,
-					"\n");
-			if (count >= PAGE_SIZE)
-				return PAGE_SIZE - 1;
+		if (!mxt_object_readable(object->type))
 			continue;
-		}

-		for (j = 0; j < object->size + 1; j++) {
-			error = mxt_read_object(data,
-						object->type, j, &val);
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"T%u:\n", object->type);
+
+		for (j = 0; j < object->instances + 1; j++) {
+			u16 size = object->size + 1;
+			u16 addr = object->start_address + j * size;
+
+			error = __mxt_read_reg(data->client, addr, size, obuf);
 			if (error)
-				return error;
+				goto done;

-			count += snprintf(buf + count, PAGE_SIZE - count,
-					"\t[%2d]: %02x (%d)\n", j, val, val);
-			if (count >= PAGE_SIZE)
-				return PAGE_SIZE - 1;
+			count = mxt_show_instance(buf, count, object, j, obuf);
 		}
-
-		count += snprintf(buf + count, PAGE_SIZE - count, "\n");
-		if (count >= PAGE_SIZE)
-			return PAGE_SIZE - 1;
 	}

-	return count;
+done:
+	kfree(obuf);
+	return error ?: count;
 }

 static int mxt_load_fw(struct device *dev, const char *fn)
@ -1028,8 +1036,7 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 		/* Wait for reset */
 		msleep(MXT_FWRESET_TIME);

-		kfree(data->object_table);
-		data->object_table = NULL;
+		mxt_free_object_table(data);

 		mxt_initialize(data);
 	}
@ -1043,10 +1050,14 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	return count;
 }

+static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
+static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
 static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
 static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);

 static struct attribute *mxt_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_hw_version.attr,
 	&dev_attr_object.attr,
 	&dev_attr_update_fw.attr,
 	NULL
@ -1093,6 +1104,7 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	struct mxt_data *data;
 	struct input_dev *input_dev;
 	int error;
+	unsigned int num_mt_slots;

 	if (!pdata)
 		return -EINVAL;
@ -1106,6 +1118,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	}

 	input_dev->name = "Atmel maXTouch Touchscreen";
+	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
+		 client->adapter->nr, client->addr);
+	input_dev->phys = data->phys;
+
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 	input_dev->open = mxt_input_open;
@ -1118,6 +1134,10 @@ static int __devinit mxt_probe(struct i2c_client *client,

 	mxt_calc_resolution(data);

+	error = mxt_initialize(data);
+	if (error)
+		goto err_free_mem;
+
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
@ -1131,7 +1151,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 			     0, 255, 0, 0);

 	/* For multi touch */
-	input_mt_init_slots(input_dev, MXT_MAX_FINGER);
+	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+	error = input_mt_init_slots(input_dev, num_mt_slots);
+	if (error)
+		goto err_free_object;
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
 			     0, MXT_MAX_AREA, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@ -1144,13 +1167,9 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	input_set_drvdata(input_dev, data);
 	i2c_set_clientdata(client, data);

-	error = mxt_initialize(data);
-	if (error)
-		goto err_free_object;
-
 	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
 				     pdata->irqflags | IRQF_ONESHOT,
-				     client->dev.driver->name, data);
+				     client->name, data);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
 		goto err_free_object;
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@ -0,0 +1,544 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mms114.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Write only registers */
+#define MMS114_MODE_CONTROL		0x01
+#define MMS114_OPERATION_MODE_MASK	0xE
+#define MMS114_ACTIVE			(1 << 1)
+
+#define MMS114_XY_RESOLUTION_H		0x02
+#define MMS114_X_RESOLUTION		0x03
+#define MMS114_Y_RESOLUTION		0x04
+#define MMS114_CONTACT_THRESHOLD	0x05
+#define MMS114_MOVING_THRESHOLD		0x06
+
+/* Read only registers */
+#define MMS114_PACKET_SIZE		0x0F
+#define MMS114_INFOMATION		0x10
+#define MMS114_TSP_REV			0xF0
+
+/* Minimum delay time is 50us between stop and start signal of i2c */
+#define MMS114_I2C_DELAY		50
+
+/* 200ms needs after power on */
+#define MMS114_POWERON_DELAY		200
+
+/* Touchscreen absolute values */
+#define MMS114_MAX_AREA			0xff
+
+#define MMS114_MAX_TOUCH		10
+#define MMS114_PACKET_NUM		8
+
+/* Touch type */
+#define MMS114_TYPE_NONE		0
+#define MMS114_TYPE_TOUCHSCREEN		1
+#define MMS114_TYPE_TOUCHKEY		2
+
+struct mms114_data {
+	struct i2c_client	*client;
+	struct input_dev	*input_dev;
+	struct regulator	*core_reg;
+	struct regulator	*io_reg;
+	const struct mms114_platform_data	*pdata;
+
+	/* Use cache data for mode control register(write only) */
+	u8			cache_mode_control;
+};
+
+struct mms114_touch {
+	u8 id:4, reserved_bit4:1, type:2, pressed:1;
+	u8 x_hi:4, y_hi:4;
+	u8 x_lo;
+	u8 y_lo;
+	u8 width;
+	u8 strength;
+	u8 reserved[2];
+} __packed;
+
+static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
+			     unsigned int len, u8 *val)
+{
+	struct i2c_client *client = data->client;
+	struct i2c_msg xfer[2];
+	u8 buf = reg & 0xff;
+	int error;
+
+	if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
+		BUG();
+
+	/* Write register: use repeated start */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
+	xfer[0].len = 1;
+	xfer[0].buf = &buf;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = len;
+	xfer[1].buf = val;
+
+	error = i2c_transfer(client->adapter, xfer, 2);
+	if (error != 2) {
+		dev_err(&client->dev,
+			"%s: i2c transfer failed (%d)\n", __func__, error);
+		return error < 0 ? error : -EIO;
+	}
+	udelay(MMS114_I2C_DELAY);
+
+	return 0;
+}
+
+static int mms114_read_reg(struct mms114_data *data, unsigned int reg)
+{
+	u8 val;
+	int error;
+
+	if (reg == MMS114_MODE_CONTROL)
+		return data->cache_mode_control;
+
+	error = __mms114_read_reg(data, reg, 1, &val);
+	return error < 0 ? error : val;
+}
+
+static int mms114_write_reg(struct mms114_data *data, unsigned int reg,
+			    unsigned int val)
+{
+	struct i2c_client *client = data->client;
+	u8 buf[2];
+	int error;
+
+	buf[0] = reg & 0xff;
+	buf[1] = val & 0xff;
+
+	error = i2c_master_send(client, buf, 2);
+	if (error != 2) {
+		dev_err(&client->dev,
+			"%s: i2c send failed (%d)\n", __func__, error);
+		return error < 0 ? error : -EIO;
+	}
+	udelay(MMS114_I2C_DELAY);
+
+	if (reg == MMS114_MODE_CONTROL)
+		data->cache_mode_control = val;
+
+	return 0;
+}
+
+static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *touch)
+{
+	const struct mms114_platform_data *pdata = data->pdata;
+	struct i2c_client *client = data->client;
+	struct input_dev *input_dev = data->input_dev;
+	unsigned int id;
+	unsigned int x;
+	unsigned int y;
+
+	if (touch->id > MMS114_MAX_TOUCH) {
+		dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id);
+		return;
+	}
+
+	if (touch->type != MMS114_TYPE_TOUCHSCREEN) {
+		dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type);
+		return;
+	}
+
+	id = touch->id - 1;
+	x = touch->x_lo | touch->x_hi << 8;
+	y = touch->y_lo | touch->y_hi << 8;
+	if (x > pdata->x_size || y > pdata->y_size) {
+		dev_dbg(&client->dev,
+			"Wrong touch coordinates (%d, %d)\n", x, y);
+		return;
+	}
+
+	if (pdata->x_invert)
+		x = pdata->x_size - x;
+	if (pdata->y_invert)
+		y = pdata->y_size - y;
+
+	dev_dbg(&client->dev,
+		"id: %d, type: %d, pressed: %d, x: %d, y: %d, width: %d, strength: %d\n",
+		id, touch->type, touch->pressed,
+		x, y, touch->width, touch->strength);
+
+	input_mt_slot(input_dev, id);
+	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
+
+	if (touch->pressed) {
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
+	}
+}
+
+static irqreturn_t mms114_interrupt(int irq, void *dev_id)
+{
+	struct mms114_data *data = dev_id;
+	struct input_dev *input_dev = data->input_dev;
+	struct mms114_touch touch[MMS114_MAX_TOUCH];
+	int packet_size;
+	int touch_size;
+	int index;
+	int error;
+
+	mutex_lock(&input_dev->mutex);
+	if (!input_dev->users) {
+		mutex_unlock(&input_dev->mutex);
+		goto out;
+	}
+	mutex_unlock(&input_dev->mutex);
+
+	packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
+	if (packet_size <= 0)
+		goto out;
+
+	touch_size = packet_size / MMS114_PACKET_NUM;
+
+	error = __mms114_read_reg(data, MMS114_INFOMATION, packet_size,
+			(u8 *)touch);
+	if (error < 0)
+		goto out;
+
+	for (index = 0; index < touch_size; index++)
+		mms114_process_mt(data, touch + index);
+
+	input_mt_report_pointer_emulation(data->input_dev, true);
+	input_sync(data->input_dev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int mms114_set_active(struct mms114_data *data, bool active)
+{
+	int val;
+
+	val = mms114_read_reg(data, MMS114_MODE_CONTROL);
+	if (val < 0)
+		return val;
+
+	val &= ~MMS114_OPERATION_MODE_MASK;
+
+	/* If active is false, sleep mode */
+	if (active)
+		val |= MMS114_ACTIVE;
+
+	return mms114_write_reg(data, MMS114_MODE_CONTROL, val);
+}
+
+static int mms114_get_version(struct mms114_data *data)
+{
+	struct device *dev = &data->client->dev;
+	u8 buf[6];
+	int error;
+
+	error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
+	if (error < 0)
+		return error;
+
+	dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n",
+		 buf[0], buf[1], buf[3]);
+
+	return 0;
+}
+
+static int mms114_setup_regs(struct mms114_data *data)
+{
+	const struct mms114_platform_data *pdata = data->pdata;
+	int val;
+	int error;
+
+	error = mms114_get_version(data);
+	if (error < 0)
+		return error;
+
+	error = mms114_set_active(data, true);
+	if (error < 0)
+		return error;
+
+	val = (pdata->x_size >> 8) & 0xf;
+	val |= ((pdata->y_size >> 8) & 0xf) << 4;
+	error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val);
+	if (error < 0)
+		return error;
+
+	val = pdata->x_size & 0xff;
+	error = mms114_write_reg(data, MMS114_X_RESOLUTION, val);
+	if (error < 0)
+		return error;
+
+	val = pdata->y_size & 0xff;
+	error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val);
+	if (error < 0)
+		return error;
+
+	if (pdata->contact_threshold) {
+		error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD,
+				pdata->contact_threshold);
+		if (error < 0)
+			return error;
+	}
+
+	if (pdata->moving_threshold) {
+		error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD,
+				pdata->moving_threshold);
+		if (error < 0)
+			return error;
+	}
+
+	return 0;
+}
+
+static int mms114_start(struct mms114_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+
+	if (data->core_reg)
+		regulator_enable(data->core_reg);
+	if (data->io_reg)
+		regulator_enable(data->io_reg);
+	mdelay(MMS114_POWERON_DELAY);
+
+	error = mms114_setup_regs(data);
+	if (error < 0)
+		return error;
+
+	if (data->pdata->cfg_pin)
+		data->pdata->cfg_pin(true);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void mms114_stop(struct mms114_data *data)
+{
+	struct i2c_client *client = data->client;
+
+	disable_irq(client->irq);
+
+	if (data->pdata->cfg_pin)
+		data->pdata->cfg_pin(false);
+
+	if (data->io_reg)
+		regulator_disable(data->io_reg);
+	if (data->core_reg)
+		regulator_disable(data->core_reg);
+}
+
+static int mms114_input_open(struct input_dev *dev)
+{
+	struct mms114_data *data = input_get_drvdata(dev);
+
+	return mms114_start(data);
+}
+
+static void mms114_input_close(struct input_dev *dev)
+{
+	struct mms114_data *data = input_get_drvdata(dev);
+
+	mms114_stop(data);
+}
+
+static int __devinit mms114_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct mms114_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!client->dev.platform_data) {
+		dev_err(&client->dev, "Need platform data\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_PROTOCOL_MANGLING)) {
+		dev_err(&client->dev,
+			"Need i2c bus that supports protocol mangling\n");
+		return -ENODEV;
+	}
+
+	data = kzalloc(sizeof(struct mms114_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+	data->pdata = client->dev.platform_data;
+
+	input_dev->name = "MELPAS MMS114 Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->open = mms114_input_open;
+	input_dev->close = mms114_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, data->pdata->x_size, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0);
+
+	/* For multi touch */
+	input_mt_init_slots(input_dev, MMS114_MAX_TOUCH);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, MMS114_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, data->pdata->x_size, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, data->pdata->y_size, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+	i2c_set_clientdata(client, data);
+
+	data->core_reg = regulator_get(&client->dev, "avdd");
+	if (IS_ERR(data->core_reg)) {
+		error = PTR_ERR(data->core_reg);
+		dev_err(&client->dev,
+			"Unable to get the Core regulator (%d)\n", error);
+		goto err_free_mem;
+	}
+
+	data->io_reg = regulator_get(&client->dev, "vdd");
+	if (IS_ERR(data->io_reg)) {
+		error = PTR_ERR(data->io_reg);
+		dev_err(&client->dev,
+			"Unable to get the IO regulator (%d)\n", error);
+		goto err_core_reg;
+	}
+
+	error = request_threaded_irq(client->irq, NULL, mms114_interrupt,
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "mms114", data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_io_reg;
+	}
+	disable_irq(client->irq);
+
+	error = input_register_device(data->input_dev);
+	if (error)
+		goto err_free_irq;
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_io_reg:
+	regulator_put(data->io_reg);
+err_core_reg:
+	regulator_put(data->core_reg);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static int __devexit mms114_remove(struct i2c_client *client)
+{
+	struct mms114_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	regulator_put(data->io_reg);
+	regulator_put(data->core_reg);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mms114_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mms114_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+
+	/* Release all touch */
+	for (id = 0; id < MMS114_MAX_TOUCH; id++) {
+		input_mt_slot(input_dev, id);
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
+	}
+
+	input_mt_report_pointer_emulation(input_dev, true);
+	input_sync(input_dev);
+
+	mutex_lock(&input_dev->mutex);
+	if (input_dev->users)
+		mms114_stop(data);
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int mms114_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mms114_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+	int error;
+
+	mutex_lock(&input_dev->mutex);
+	if (input_dev->users) {
+		error = mms114_start(data);
+		if (error < 0) {
+			mutex_unlock(&input_dev->mutex);
+			return error;
+		}
+	}
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);
+
+static const struct i2c_device_id mms114_id[] = {
+	{ "mms114", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mms114_id);
+
+static struct i2c_driver mms114_driver = {
+	.driver = {
+		.name	= "mms114",
+		.owner	= THIS_MODULE,
+		.pm	= &mms114_pm_ops,
+	},
+	.probe		= mms114_probe,
+	.remove		= __devexit_p(mms114_remove),
+	.id_table	= mms114_id,
+};
+
+module_i2c_driver(mms114_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver");
+MODULE_LICENSE("GPL");
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@ -149,7 +149,7 @@ static int __devinit wacom_i2c_probe(struct i2c_client *client,
 {
 	struct wacom_i2c *wac_i2c;
 	struct input_dev *input;
-	struct wacom_features features;
+	struct wacom_features features = { 0 };
 	int error;

 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
--- a/include/linux/i2c/mms114.h
+++ b/include/linux/i2c/mms114.h
@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#ifndef __LINUX_MMS114_H
+#define __LINUX_MMS114_H
+
+struct mms114_platform_data {
+	unsigned int x_size;
+	unsigned int y_size;
+	unsigned int contact_threshold;
+	unsigned int moving_threshold;
+	bool x_invert;
+	bool y_invert;
+
+	void (*cfg_pin)(bool);
+};
+
+#endif	/* __LINUX_MMS114_H */
--- a/include/linux/input.h
+++ b/include/linux/input.h
@ -807,18 +807,20 @@ struct input_keymap_entry {
 #define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
 #define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
 #define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-#define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
-#define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
+#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
 #define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
 #define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
 #define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
 #define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
+#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
+#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */

 #ifdef __KERNEL__
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
-#define ABS_MT_LAST		ABS_MT_DISTANCE
+#define ABS_MT_LAST		ABS_MT_TOOL_Y
 #endif

 #define ABS_MAX			0x3f
--- a/include/linux/spi/ad7879.h
+++ b/include/linux/spi/ad7879.h
@ -12,6 +12,8 @@ struct ad7879_platform_data {
 	u16	y_min, y_max;
 	u16	pressure_min, pressure_max;

+	bool	swap_xy;		/* swap x and y axes */
+
 	/* [0..255] 0=OFF Starts at 1=550us and goes
 	 * all the way to 9.440ms in steps of 35us.
 	 */