diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index ed13889c1162..99da8b6d2c36 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -23,6 +23,7 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
+objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
 
 omapfb-objs := $(objs-yy)
 
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
new file mode 100644
index 000000000000..c4f306a4e5c9
--- /dev/null
+++ b/drivers/video/omap/lcd_sx1.c
@@ -0,0 +1,334 @@
+/*
+ * LCD panel support for the Siemens SX1 mobile phone
+ *
+ * Current version : Vovan888@gmail.com, great help from FCA00000
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/omapfb.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/mux.h>
+
+/*
+ * OMAP310 GPIO registers
+ */
+#define GPIO_DATA_INPUT		0xfffce000
+#define GPIO_DATA_OUTPUT	0xfffce004
+#define GPIO_DIR_CONTROL	0xfffce008
+#define GPIO_INT_CONTROL	0xfffce00c
+#define GPIO_INT_MASK		0xfffce010
+#define GPIO_INT_STATUS		0xfffce014
+#define GPIO_PIN_CONTROL	0xfffce018
+
+
+#define A_LCD_SSC_RD	3
+#define A_LCD_SSC_SD	7
+#define _A_LCD_RESET	9
+#define _A_LCD_SSC_CS	12
+#define _A_LCD_SSC_A0	13
+
+#define DSP_REG		0xE1017024
+
+const unsigned char INIT_1[12] = {
+	0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
+};
+
+const unsigned char INIT_2[127] = {
+	0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
+	0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
+	0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
+	0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
+	0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
+	0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
+	0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
+	0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
+	0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
+	0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
+	0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
+	0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
+	0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
+	0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
+	0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
+	0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
+};
+
+const unsigned char INIT_3[15] = {
+	0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
+	0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
+};
+
+static void epson_sendbyte(int flag, unsigned char byte)
+{
+	int i, shifter = 0x80;
+
+	if (!flag)
+		omap_set_gpio_dataout(_A_LCD_SSC_A0, 0);
+	mdelay(2);
+	omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
+
+	omap_set_gpio_dataout(A_LCD_SSC_SD, flag);
+
+	OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
+	OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
+	for (i = 0; i < 8; i++) {
+		OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
+		omap_set_gpio_dataout(A_LCD_SSC_SD, shifter & byte);
+		OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
+		shifter >>= 1;
+	}
+	omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+}
+
+static void init_system(void)
+{
+	omap_mcbsp_request(OMAP_MCBSP3);
+	omap_mcbsp_stop(OMAP_MCBSP3);
+}
+
+static void setup_GPIO(void)
+{
+	/* new wave */
+	omap_request_gpio(A_LCD_SSC_RD);
+	omap_request_gpio(A_LCD_SSC_SD);
+	omap_request_gpio(_A_LCD_RESET);
+	omap_request_gpio(_A_LCD_SSC_CS);
+	omap_request_gpio(_A_LCD_SSC_A0);
+
+	/* set all GPIOs to output */
+	omap_set_gpio_direction(A_LCD_SSC_RD, 0);
+	omap_set_gpio_direction(A_LCD_SSC_SD, 0);
+	omap_set_gpio_direction(_A_LCD_RESET, 0);
+	omap_set_gpio_direction(_A_LCD_SSC_CS, 0);
+	omap_set_gpio_direction(_A_LCD_SSC_A0, 0);
+
+	/* set GPIO data */
+	omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
+	omap_set_gpio_dataout(A_LCD_SSC_SD, 0);
+	omap_set_gpio_dataout(_A_LCD_RESET, 0);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+}
+
+static void display_init(void)
+{
+	int i;
+
+	omap_cfg_reg(MCBSP3_CLKX);
+
+	mdelay(2);
+	setup_GPIO();
+	mdelay(2);
+
+	/* reset LCD */
+	omap_set_gpio_dataout(A_LCD_SSC_SD, 1);
+	epson_sendbyte(0, 0x25);
+
+	omap_set_gpio_dataout(_A_LCD_RESET, 0);
+	mdelay(10);
+	omap_set_gpio_dataout(_A_LCD_RESET, 1);
+
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	mdelay(2);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD, phase 1 */
+	epson_sendbyte(0, 0xCA);
+	for (i = 0; i < 10; i++)
+		epson_sendbyte(1, INIT_1[i]);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 2 */
+	epson_sendbyte(0, 0xCB);
+	for (i = 0; i < 125; i++)
+		epson_sendbyte(1, INIT_2[i]);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 2a */
+	epson_sendbyte(0, 0xCC);
+	for (i = 0; i < 14; i++)
+		epson_sendbyte(1, INIT_3[i]);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 3 */
+	epson_sendbyte(0, 0xBC);
+	epson_sendbyte(1, 0x08);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 4 */
+	epson_sendbyte(0, 0x07);
+	epson_sendbyte(1, 0x05);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 5 */
+	epson_sendbyte(0, 0x94);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 6 */
+	epson_sendbyte(0, 0xC6);
+	epson_sendbyte(1, 0x80);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	mdelay(100); /* used to be 1000 */
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 7 */
+	epson_sendbyte(0, 0x16);
+	epson_sendbyte(1, 0x02);
+	epson_sendbyte(1, 0x00);
+	epson_sendbyte(1, 0xB1);
+	epson_sendbyte(1, 0x00);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 8 */
+	epson_sendbyte(0, 0x76);
+	epson_sendbyte(1, 0x00);
+	epson_sendbyte(1, 0x00);
+	epson_sendbyte(1, 0xDB);
+	epson_sendbyte(1, 0x00);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	/* init LCD phase 9 */
+	epson_sendbyte(0, 0xAF);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+}
+
+static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+{
+	return 0;
+}
+
+static void sx1_panel_cleanup(struct lcd_panel *panel)
+{
+}
+
+static void sx1_panel_disable(struct lcd_panel *panel)
+{
+	printk(KERN_INFO "SX1: LCD panel disable\n");
+	sx1_setmmipower(0);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+
+	epson_sendbyte(0, 0x25);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	epson_sendbyte(0, 0xAE);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+	mdelay(100);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+	epson_sendbyte(0, 0x95);
+	omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+}
+
+static int sx1_panel_enable(struct lcd_panel *panel)
+{
+	printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
+	init_system();
+	display_init();
+
+	sx1_setmmipower(1);
+	sx1_setbacklight(0x18);
+	sx1_setkeylight (0x06);
+	return 0;
+}
+
+
+static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
+{
+	return 0;
+}
+
+struct lcd_panel sx1_panel = {
+	.name		= "sx1",
+	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+			  OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
+			  OMAP_LCDC_INV_OUTPUT_EN,
+
+	.x_res		= 176,
+	.y_res		= 220,
+	.data_lines	= 16,
+	.bpp		= 16,
+	.hsw		= 5,
+	.hfp		= 5,
+	.hbp		= 5,
+	.vsw		= 2,
+	.vfp		= 1,
+	.vbp		= 1,
+	.pixel_clock	= 1500,
+
+	.init		= sx1_panel_init,
+	.cleanup	= sx1_panel_cleanup,
+	.enable		= sx1_panel_enable,
+	.disable	= sx1_panel_disable,
+	.get_caps	= sx1_panel_get_caps,
+};
+
+static int sx1_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&sx1_panel);
+	return 0;
+}
+
+static int sx1_panel_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	return 0;
+}
+
+static int sx1_panel_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+
+struct platform_driver sx1_panel_driver = {
+	.probe		= sx1_panel_probe,
+	.remove		= sx1_panel_remove,
+	.suspend	= sx1_panel_suspend,
+	.resume		= sx1_panel_resume,
+	.driver	= {
+		.name	= "lcd_sx1",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int sx1_panel_drv_init(void)
+{
+	return platform_driver_register(&sx1_panel_driver);
+}
+
+static void sx1_panel_drv_cleanup(void)
+{
+	platform_driver_unregister(&sx1_panel_driver);
+}
+
+module_init(sx1_panel_drv_init);
+module_exit(sx1_panel_drv_cleanup);