openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

hwmon: Driver for ADT7410 

This patch brings basic support for the Analog Devices ADT7410 temperature
sensor. The following functionality has been implemented:

  * get current temperature
  * get/set minimum, maximum and critical temperature
  * get/set hysteresis
  * get alarm events for minimum, maximum and critical temperature

All implemented sysfs attributes have been sucessfully tested at temperatures
of 15°C to 40°C.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Hartmut Knaack 2012-08-12 18:15:49 +02:00 committed by Guenter Roeck
parent 87432a2e22
commit 983b97bed2
4 changed files with 521 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
Documentation/hwmon/adt7410 Normal file
View File

@ -0,0 +1,51 @@
Kernel driver adt7410
=====================
Supported chips:
* Analog Devices ADT7410
Prefix: 'adt7410'
Addresses scanned: I2C 0x48 - 0x4B
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
Author: Hartmut Knaack <knaack.h@gmx.de>
Description
-----------
The ADT7410 is a temperature sensor with rated temperature range of -55°C to
+150°C. It has a high accuracy of +/-0.5°C and can be operated at a resolution
of 13 bits (0.0625°C) or 16 bits (0.0078°C). The sensor provides an INT pin to
indicate that a minimum or maximum temperature set point has been exceeded, as
well as a critical temperature (CT) pin to indicate that the critical
temperature set point has been exceeded. Both pins can be set up with a common
hysteresis of 0°C - 15°C and a fault queue, ranging from 1 to 4 events. Both
pins can individually set to be active-low or active-high, while the whole
device can either run in comparator mode or interrupt mode. The ADT7410
supports continous temperature sampling, as well as sampling one temperature
value per second or even justget one sample on demand for power saving.
Besides, it can completely power down its ADC, if power management is
required.
Configuration Notes
-------------------
Since the device uses one hysteresis value, which is an offset to minimum,
maximum and critical temperature, it can only be set for temp#_max_hyst.
However, temp#_min_hyst and temp#_crit_hyst show their corresponding
hysteresis.
The device is set to 16 bit resolution and comparator mode.
sysfs-Interface
---------------
temp#_input - temperature input
temp#_min - temperature minimum setpoint
temp#_max - temperature maximum setpoint
temp#_crit - critical temperature setpoint
temp#_min_hyst - hysteresis for temperature minimum (read-only)
temp#_max_hyst - hysteresis for temperature maximum (read/write)
temp#_crit_hyst - hysteresis for critical temperature (read-only)
temp#_min_alarm - temperature minimum alarm flag
temp#_max_alarm - temperature maximum alarm flag
temp#_crit_alarm - critical temperature alarm flag

10
drivers/hwmon/Kconfig
View File

@ -179,6 +179,16 @@ config SENSORS_ADM9240
This driver can also be built as a module. If so, the module
will be called adm9240.
config SENSORS_ADT7410
tristate "Analog Devices ADT7410"
depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for the Analog Devices
ADT7410 temperature monitoring chip.
This driver can also be built as a module. If so, the module
will be called adt7410.
config SENSORS_ADT7411
tristate "Analog Devices ADT7411"
depends on I2C && EXPERIMENTAL

1
drivers/hwmon/Makefile
View File

@ -34,6 +34,7 @@ obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
obj-$(CONFIG_SENSORS_ADS1015) += ads1015.o
obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
obj-$(CONFIG_SENSORS_ADS7871) += ads7871.o
obj-$(CONFIG_SENSORS_ADT7410) += adt7410.o
obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o

459
drivers/hwmon/adt7410.c Normal file
View File

@ -0,0 +1,459 @@
/*
* adt7410.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* This driver handles the ADT7410 and compatible digital temperature sensors.
* Hartmut Knaack <knaack.h@gmx.de> 2012-07-22
* based on lm75.c by Frodo Looijaard <frodol@dds.nl>
* and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
/*
* ADT7410 registers definition
*/
#define ADT7410_TEMPERATURE 0
#define ADT7410_STATUS 2
#define ADT7410_CONFIG 3
#define ADT7410_T_ALARM_HIGH 4
#define ADT7410_T_ALARM_LOW 6
#define ADT7410_T_CRIT 8
#define ADT7410_T_HYST 0xA
/*
* ADT7410 status
*/
#define ADT7410_STAT_T_LOW (1 << 4)
#define ADT7410_STAT_T_HIGH (1 << 5)
#define ADT7410_STAT_T_CRIT (1 << 6)
#define ADT7410_STAT_NOT_RDY (1 << 7)
/*
* ADT7410 config
*/
#define ADT7410_FAULT_QUEUE_MASK (1 << 0 | 1 << 1)
#define ADT7410_CT_POLARITY (1 << 2)
#define ADT7410_INT_POLARITY (1 << 3)
#define ADT7410_EVENT_MODE (1 << 4)
#define ADT7410_MODE_MASK (1 << 5 | 1 << 6)
#define ADT7410_FULL (0 << 5 | 0 << 6)
#define ADT7410_PD (1 << 5 | 1 << 6)
#define ADT7410_RESOLUTION (1 << 7)
/*
* ADT7410 masks
*/
#define ADT7410_T13_VALUE_MASK 0xFFF8
#define ADT7410_T_HYST_MASK 0xF
/* straight from the datasheet */
#define ADT7410_TEMP_MIN (-55000)
#define ADT7410_TEMP_MAX 150000
enum adt7410_type { /* keep sorted in alphabetical order */
adt7410,
};
/* Addresses scanned */
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
I2C_CLIENT_END };
static const u8 ADT7410_REG_TEMP[4] = {
ADT7410_TEMPERATURE, /* input */
ADT7410_T_ALARM_HIGH, /* high */
ADT7410_T_ALARM_LOW, /* low */
ADT7410_T_CRIT, /* critical */
};
/* Each client has this additional data */
struct adt7410_data {
struct device *hwmon_dev;
struct mutex update_lock;
u8 config;
u8 oldconfig;
bool valid; /* true if registers valid */
unsigned long last_updated; /* In jiffies */
s16 temp[4]; /* Register values,
0 = input
1 = high
2 = low
3 = critical */
u8 hyst; /* hysteresis offset */
};
/*
* adt7410 register access by I2C
*/
static int adt7410_temp_ready(struct i2c_client *client)
{
int i, status;
for (i = 0; i < 6; i++) {
status = i2c_smbus_read_byte_data(client, ADT7410_STATUS);
if (status < 0)
return status;
if (!(status & ADT7410_STAT_NOT_RDY))
return 0;
msleep(60);
}
return -ETIMEDOUT;
}
static struct adt7410_data *adt7410_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct adt7410_data *data = i2c_get_clientdata(client);
struct adt7410_data *ret = data;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
int i, status;
dev_dbg(&client->dev, "Starting update\n");
status = adt7410_temp_ready(client); /* check for new value */
if (unlikely(status)) {
ret = ERR_PTR(status);
goto abort;
}
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
status = i2c_smbus_read_word_swapped(client,
ADT7410_REG_TEMP[i]);
if (unlikely(status < 0)) {
dev_dbg(dev,
"Failed to read value: reg %d, error %d\n",
ADT7410_REG_TEMP[i], status);
ret = ERR_PTR(status);
goto abort;
}
data->temp[i] = status;
}
status = i2c_smbus_read_byte_data(client, ADT7410_T_HYST);
if (unlikely(status < 0)) {
dev_dbg(dev,
"Failed to read value: reg %d, error %d\n",
ADT7410_T_HYST, status);
ret = ERR_PTR(status);
goto abort;
}
data->hyst = status;
data->last_updated = jiffies;
data->valid = true;
}
abort:
mutex_unlock(&data->update_lock);
return ret;
}
static s16 ADT7410_TEMP_TO_REG(long temp)
{
return DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, ADT7410_TEMP_MIN,
ADT7410_TEMP_MAX) * 128, 1000);
}
static int ADT7410_REG_TO_TEMP(struct adt7410_data *data, s16 reg)
{
/* in 13 bit mode, bits 0-2 are status flags - mask them out */
if (!(data->config & ADT7410_RESOLUTION))
reg &= ADT7410_T13_VALUE_MASK;
/*
* temperature is stored in twos complement format, in steps of
* 1/128°C
*/
return DIV_ROUND_CLOSEST(reg * 1000, 128);
}
/*-----------------------------------------------------------------------*/
/* sysfs attributes for hwmon */
static ssize_t adt7410_show_temp(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct adt7410_data *data = adt7410_update_device(dev);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", ADT7410_REG_TO_TEMP(data,
data->temp[attr->index]));
}
static ssize_t adt7410_set_temp(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct i2c_client *client = to_i2c_client(dev);
struct adt7410_data *data = i2c_get_clientdata(client);
int nr = attr->index;
long temp;
int ret;
ret = kstrtol(buf, 10, &temp);
if (ret)
return ret;
mutex_lock(&data->update_lock);
data->temp[nr] = ADT7410_TEMP_TO_REG(temp);
ret = i2c_smbus_write_word_swapped(client, ADT7410_REG_TEMP[nr],
data->temp[nr]);
if (ret)
count = ret;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t adt7410_show_t_hyst(struct device *dev,
struct device_attribute *da,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct adt7410_data *data = adt7410_update_device(dev);
int nr = attr->index;
int hyst = (data->hyst & ADT7410_T_HYST_MASK) * 1000;
/*
* hysteresis is stored as a 4 bit offset in the device, convert it
* to an absolute value
*/
if (nr == 2) /* min has positive offset, others have negative */
hyst = -hyst;
return sprintf(buf, "%d\n",
ADT7410_REG_TO_TEMP(data, data->temp[nr]) - hyst);
}
static ssize_t adt7410_set_t_hyst(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct adt7410_data *data = i2c_get_clientdata(client);
int limit, ret;
long hyst;
ret = kstrtol(buf, 10, &hyst);
if (ret)
return ret;
/* convert absolute hysteresis value to a 4 bit delta value */
limit = ADT7410_REG_TO_TEMP(data, data->temp[1]);
hyst = SENSORS_LIMIT(hyst, ADT7410_TEMP_MIN, ADT7410_TEMP_MAX);
data->hyst = SENSORS_LIMIT(DIV_ROUND_CLOSEST(limit - hyst, 1000),
0, ADT7410_T_HYST_MASK);
ret = i2c_smbus_write_byte_data(client, ADT7410_T_HYST, data->hyst);
if (ret)
return ret;
return count;
}
static ssize_t adt7410_show_alarm(struct device *dev,
struct device_attribute *da,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int ret;
ret = i2c_smbus_read_byte_data(client, ADT7410_STATUS);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", !!(ret & attr->index));
}
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7410_show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
adt7410_show_temp, adt7410_set_temp, 1);
static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
adt7410_show_temp, adt7410_set_temp, 2);
static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
adt7410_show_temp, adt7410_set_temp, 3);
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
adt7410_show_t_hyst, adt7410_set_t_hyst, 1);
static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO,
adt7410_show_t_hyst, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
adt7410_show_t_hyst, NULL, 3);
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, adt7410_show_alarm,
NULL, ADT7410_STAT_T_LOW);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adt7410_show_alarm,
NULL, ADT7410_STAT_T_HIGH);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, adt7410_show_alarm,
NULL, ADT7410_STAT_T_CRIT);
static struct attribute *adt7410_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
NULL
};
static const struct attribute_group adt7410_group = {
.attrs = adt7410_attributes,
};
/*-----------------------------------------------------------------------*/
/* device probe and removal */
static int adt7410_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adt7410_data *data;
int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
data = devm_kzalloc(&client->dev, sizeof(struct adt7410_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
/* configure as specified */
ret = i2c_smbus_read_byte_data(client, ADT7410_CONFIG);
if (ret < 0) {
dev_dbg(&client->dev, "Can't read config? %d\n", ret);
return ret;
}
data->oldconfig = ret;
/*
* Set to 16 bit resolution, continous conversion and comparator mode.
*/
data->config = ret | ADT7410_FULL | ADT7410_RESOLUTION |
ADT7410_EVENT_MODE;
if (data->config != data->oldconfig) {
ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG,
data->config);
if (ret)
return ret;
}
dev_dbg(&client->dev, "Config %02x\n", data->config);
/* Register sysfs hooks */
ret = sysfs_create_group(&client->dev.kobj, &adt7410_group);
if (ret)
goto exit_restore;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
dev_info(&client->dev, "sensor '%s'\n", client->name);
return 0;
exit_remove:
sysfs_remove_group(&client->dev.kobj, &adt7410_group);
exit_restore:
i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->oldconfig);
return ret;
}
static int adt7410_remove(struct i2c_client *client)
{
struct adt7410_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adt7410_group);
if (data->oldconfig != data->config)
i2c_smbus_write_byte_data(client, ADT7410_CONFIG,
data->oldconfig);
return 0;
}
static const struct i2c_device_id adt7410_ids[] = {
{ "adt7410", adt7410, },
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, adt7410_ids);
#ifdef CONFIG_PM
static int adt7410_suspend(struct device *dev)
{
int ret;
struct i2c_client *client = to_i2c_client(dev);
struct adt7410_data *data = i2c_get_clientdata(client);
ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG,
data->config | ADT7410_PD);
return ret;
}
static int adt7410_resume(struct device *dev)
{
int ret;
struct i2c_client *client = to_i2c_client(dev);
struct adt7410_data *data = i2c_get_clientdata(client);
ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->config);
return ret;
}
static const struct dev_pm_ops adt7410_dev_pm_ops = {
.suspend = adt7410_suspend,
.resume = adt7410_resume,
};
#define ADT7410_DEV_PM_OPS (&adt7410_dev_pm_ops)
#else
#define ADT7410_DEV_PM_OPS NULL
#endif /* CONFIG_PM */
static struct i2c_driver adt7410_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "adt7410",
.pm = ADT7410_DEV_PM_OPS,
},
.probe = adt7410_probe,
.remove = adt7410_remove,
.id_table = adt7410_ids,
.address_list = normal_i2c,
};
module_i2c_driver(adt7410_driver);
MODULE_AUTHOR("Hartmut Knaack");
MODULE_DESCRIPTION("ADT7410 driver");
MODULE_LICENSE("GPL");