mirror of https://gitee.com/openkylin/linux.git
V4L/DVB (4029): [PATCH] Genpix 8PSK->USB driver (Take 2)
This is a patch which includes support for the GENPIX 8PSK->USB module. The board supports QPSK, BPSK and 8PSK decoding (though I don't think it will be DVB-S2 compliant) With the following patch, the boad is equivalent to a budget card (no CA Module) The patch which adds 8psk suppot will follow, but is seperate, as it requires DVB-S2 support More info on the board can be found at www.genpix-electronics.com (and they host the requisite firmwares there as well) Signed off by: Alan Nisota <alannisota@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Alan Nisota
Mauro Carvalho Chehab
parent
6daa4f86e9
commit
9bbe076f36
|
|
@ -130,6 +130,15 @@ config DVB_USB_VP702X
|
|||
|
||||
DVB-S USB2.0 receivers.
|
||||
|
||||
config DVB_USB_GP8PSK
|
||||
tristate "GENPIX 8PSK->USB module support"
|
||||
depends on DVB_USB
|
||||
help
|
||||
Say Y here to support the
|
||||
GENPIX 8psk module
|
||||
|
||||
DVB-S USB2.0 receivers.
|
||||
|
||||
config DVB_USB_NOVA_T_USB2
|
||||
tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
|
||||
depends on DVB_USB
|
||||
|
|
|
|||
|
|
@ -7,6 +7,9 @@ obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o
|
|||
dvb-usb-vp702x-objs = vp702x.o vp702x-fe.o
|
||||
obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o
|
||||
|
||||
dvb-usb-gp8psk-objs = gp8psk.o gp8psk-fe.o
|
||||
obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o
|
||||
|
||||
dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o
|
||||
obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o
|
||||
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@
|
|||
#define USB_VID_VISIONPLUS 0x13d3
|
||||
#define USB_VID_TWINHAN 0x1822
|
||||
#define USB_VID_ULTIMA_ELECTRONIC 0x05d8
|
||||
#define USB_VID_GENPIX 0x09c0
|
||||
|
||||
/* Product IDs */
|
||||
#define USB_PID_ADSTECH_USB2_COLD 0xa333
|
||||
|
|
@ -104,5 +105,6 @@
|
|||
#define USB_PID_KYE_DVB_T_WARM 0x701f
|
||||
#define USB_PID_PCTV_200E 0x020e
|
||||
#define USB_PID_PCTV_400E 0x020f
|
||||
|
||||
#define USB_PID_GENPIX_8PSK_COLD 0x0200
|
||||
#define USB_PID_GENPIX_8PSK_WARM 0x0201
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,272 @@
|
|||
/* DVB USB compliant Linux driver for the
|
||||
* - GENPIX 8pks/qpsk USB2.0 DVB-S module
|
||||
*
|
||||
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
|
||||
*
|
||||
* Thanks to GENPIX for the sample code used to implement this module.
|
||||
*
|
||||
* This module is based off the vp7045 and vp702x modules
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation, version 2.
|
||||
*
|
||||
* see Documentation/dvb/README.dvb-usb for more information
|
||||
*/
|
||||
#include "gp8psk.h"
|
||||
|
||||
struct gp8psk_fe_state {
|
||||
struct dvb_frontend fe;
|
||||
|
||||
struct dvb_usb_device *d;
|
||||
|
||||
u16 snr;
|
||||
|
||||
unsigned long next_snr_check;
|
||||
};
|
||||
|
||||
static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
|
||||
{
|
||||
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
||||
u8 lock;
|
||||
|
||||
if (gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0, 0, &lock,1))
|
||||
return -EINVAL;
|
||||
|
||||
if (lock)
|
||||
*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER;
|
||||
else
|
||||
*status = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* not supported by this Frontend */
|
||||
static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
|
||||
{
|
||||
(void) fe;
|
||||
*ber = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* not supported by this Frontend */
|
||||
static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
|
||||
{
|
||||
(void) fe;
|
||||
*unc = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
|
||||
{
|
||||
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
||||
u8 buf[2];
|
||||
|
||||
if (time_after(jiffies,st->next_snr_check)) {
|
||||
gp8psk_usb_in_op(st->d,GET_SIGNAL_STRENGTH,0,0,buf,2);
|
||||
*snr = (int)(buf[1]) << 8 | buf[0];
|
||||
/* snr is reported in dBu*256 */
|
||||
/* snr / 38.4 ~= 100% strength */
|
||||
/* snr * 17 returns 100% strength as 65535 */
|
||||
if (*snr <= 3855)
|
||||
*snr = (*snr<<4) + *snr; // snr * 17
|
||||
else
|
||||
*snr = 65535;
|
||||
st->next_snr_check = jiffies + (10*HZ)/1000;
|
||||
} else {
|
||||
*snr = st->snr;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
|
||||
{
|
||||
return gp8psk_fe_read_snr(fe, strength);
|
||||
}
|
||||
|
||||
static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
|
||||
{
|
||||
tune->min_delay_ms = 800;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_set_frontend(struct dvb_frontend* fe,
|
||||
struct dvb_frontend_parameters *fep)
|
||||
{
|
||||
struct gp8psk_fe_state *state = fe->demodulator_priv;
|
||||
u8 cmd[10];
|
||||
u32 freq = fep->frequency * 1000;
|
||||
|
||||
cmd[4] = freq & 0xff;
|
||||
cmd[5] = (freq >> 8) & 0xff;
|
||||
cmd[6] = (freq >> 16) & 0xff;
|
||||
cmd[7] = (freq >> 24) & 0xff;
|
||||
|
||||
switch(fe->ops.info.type) {
|
||||
case FE_QPSK:
|
||||
cmd[0] = fep->u.qpsk.symbol_rate & 0xff;
|
||||
cmd[1] = (fep->u.qpsk.symbol_rate >> 8) & 0xff;
|
||||
cmd[2] = (fep->u.qpsk.symbol_rate >> 16) & 0xff;
|
||||
cmd[3] = (fep->u.qpsk.symbol_rate >> 24) & 0xff;
|
||||
cmd[8] = ADV_MOD_DVB_QPSK;
|
||||
cmd[9] = 0x03; /*ADV_MOD_FEC_XXX*/
|
||||
break;
|
||||
default:
|
||||
// other modes are unsuported right now
|
||||
cmd[0] = 0;
|
||||
cmd[1] = 0;
|
||||
cmd[2] = 0;
|
||||
cmd[3] = 0;
|
||||
cmd[8] = 0;
|
||||
cmd[9] = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10);
|
||||
|
||||
state->next_snr_check = jiffies;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_get_frontend(struct dvb_frontend* fe,
|
||||
struct dvb_frontend_parameters *fep)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe,
|
||||
struct dvb_diseqc_master_cmd *m)
|
||||
{
|
||||
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
||||
|
||||
deb_fe("%s\n",__FUNCTION__);
|
||||
|
||||
if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0,
|
||||
m->msg, m->msg_len)) {
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe,
|
||||
fe_sec_mini_cmd_t burst)
|
||||
{
|
||||
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
||||
u8 cmd;
|
||||
|
||||
deb_fe("%s\n",__FUNCTION__);
|
||||
|
||||
/* These commands are certainly wrong */
|
||||
cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01;
|
||||
|
||||
if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0,
|
||||
&cmd, 0)) {
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
|
||||
{
|
||||
struct gp8psk_fe_state* state = fe->demodulator_priv;
|
||||
|
||||
if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE,
|
||||
(tone == SEC_TONE_ON), 0, NULL, 0)) {
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
|
||||
{
|
||||
struct gp8psk_fe_state* state = fe->demodulator_priv;
|
||||
|
||||
if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE,
|
||||
voltage == SEC_VOLTAGE_18, 0, NULL, 0)) {
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd)
|
||||
{
|
||||
struct gp8psk_fe_state* state = fe->demodulator_priv;
|
||||
u8 cmd = sw_cmd & 0x7f;
|
||||
|
||||
if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0,
|
||||
NULL, 0)) {
|
||||
return -EINVAL;
|
||||
}
|
||||
if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80),
|
||||
0, NULL, 0)) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void gp8psk_fe_release(struct dvb_frontend* fe)
|
||||
{
|
||||
struct gp8psk_fe_state *state = fe->demodulator_priv;
|
||||
kfree(state);
|
||||
}
|
||||
|
||||
static struct dvb_frontend_ops gp8psk_fe_ops;
|
||||
|
||||
struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d)
|
||||
{
|
||||
struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL);
|
||||
if (s == NULL)
|
||||
goto error;
|
||||
|
||||
s->d = d;
|
||||
memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops));
|
||||
s->fe.demodulator_priv = s;
|
||||
|
||||
goto success;
|
||||
error:
|
||||
return NULL;
|
||||
success:
|
||||
return &s->fe;
|
||||
}
|
||||
|
||||
|
||||
static struct dvb_frontend_ops gp8psk_fe_ops = {
|
||||
.info = {
|
||||
.name = "Genpix 8psk-USB DVB-S",
|
||||
.type = FE_QPSK,
|
||||
.frequency_min = 950000,
|
||||
.frequency_max = 2150000,
|
||||
.frequency_stepsize = 100,
|
||||
.symbol_rate_min = 1000000,
|
||||
.symbol_rate_max = 45000000,
|
||||
.symbol_rate_tolerance = 500, /* ppm */
|
||||
.caps = FE_CAN_INVERSION_AUTO |
|
||||
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
||||
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
||||
FE_CAN_QPSK
|
||||
},
|
||||
|
||||
.release = gp8psk_fe_release,
|
||||
|
||||
.init = NULL,
|
||||
.sleep = NULL,
|
||||
|
||||
.set_frontend = gp8psk_fe_set_frontend,
|
||||
.get_frontend = gp8psk_fe_get_frontend,
|
||||
.get_tune_settings = gp8psk_fe_get_tune_settings,
|
||||
|
||||
.read_status = gp8psk_fe_read_status,
|
||||
.read_ber = gp8psk_fe_read_ber,
|
||||
.read_signal_strength = gp8psk_fe_read_signal_strength,
|
||||
.read_snr = gp8psk_fe_read_snr,
|
||||
.read_ucblocks = gp8psk_fe_read_unc_blocks,
|
||||
|
||||
.diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg,
|
||||
.diseqc_send_burst = gp8psk_fe_send_diseqc_burst,
|
||||
.set_tone = gp8psk_fe_set_tone,
|
||||
.set_voltage = gp8psk_fe_set_voltage,
|
||||
.dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd,
|
||||
};
|
||||
|
|
@ -0,0 +1,254 @@
|
|||
/* DVB USB compliant Linux driver for the
|
||||
* - GENPIX 8pks/qpsk USB2.0 DVB-S module
|
||||
*
|
||||
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
|
||||
*
|
||||
* Thanks to GENPIX for the sample code used to implement this module.
|
||||
*
|
||||
* This module is based off the vp7045 and vp702x modules
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation, version 2.
|
||||
*
|
||||
* see Documentation/dvb/README.dvb-usb for more information
|
||||
*/
|
||||
#include "gp8psk.h"
|
||||
|
||||
/* debug */
|
||||
static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
|
||||
int dvb_usb_gp8psk_debug;
|
||||
module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
|
||||
MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
|
||||
|
||||
int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
|
||||
{
|
||||
int ret = 0,try = 0;
|
||||
|
||||
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
|
||||
return ret;
|
||||
|
||||
while (ret >= 0 && ret != blen && try < 3) {
|
||||
ret = usb_control_msg(d->udev,
|
||||
usb_rcvctrlpipe(d->udev,0),
|
||||
req,
|
||||
USB_TYPE_VENDOR | USB_DIR_IN,
|
||||
value,index,b,blen,
|
||||
2000);
|
||||
deb_info("reading number %d (ret: %d)\n",try,ret);
|
||||
try++;
|
||||
}
|
||||
|
||||
if (ret < 0 || ret != blen) {
|
||||
warn("usb in operation failed.");
|
||||
ret = -EIO;
|
||||
} else
|
||||
ret = 0;
|
||||
|
||||
deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
|
||||
debug_dump(b,blen,deb_xfer);
|
||||
|
||||
mutex_unlock(&d->usb_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
|
||||
u16 index, u8 *b, int blen)
|
||||
{
|
||||
int ret;
|
||||
|
||||
deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
|
||||
debug_dump(b,blen,deb_xfer);
|
||||
|
||||
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
|
||||
return ret;
|
||||
|
||||
if (usb_control_msg(d->udev,
|
||||
usb_sndctrlpipe(d->udev,0),
|
||||
req,
|
||||
USB_TYPE_VENDOR | USB_DIR_OUT,
|
||||
value,index,b,blen,
|
||||
2000) != blen) {
|
||||
warn("usb out operation failed.");
|
||||
ret = -EIO;
|
||||
} else
|
||||
ret = 0;
|
||||
mutex_unlock(&d->usb_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
|
||||
{
|
||||
int ret;
|
||||
const struct firmware *fw = NULL;
|
||||
u8 *ptr, *buf;
|
||||
if ((ret = request_firmware(&fw, bcm4500_firmware,
|
||||
&d->udev->dev)) != 0) {
|
||||
err("did not find the bcm4500 firmware file. (%s) "
|
||||
"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
|
||||
bcm4500_firmware,ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) {
|
||||
release_firmware(fw);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware);
|
||||
|
||||
ptr = fw->data;
|
||||
buf = (u8 *) kmalloc(512, GFP_KERNEL | GFP_DMA);
|
||||
|
||||
while (ptr[0] != 0xff) {
|
||||
u16 buflen = ptr[0] + 4;
|
||||
if (ptr + buflen >= fw->data + fw->size) {
|
||||
err("failed to load bcm4500 firmware.");
|
||||
release_firmware(fw);
|
||||
kfree(buf);
|
||||
return -EINVAL;
|
||||
}
|
||||
memcpy(buf, ptr, buflen);
|
||||
if (dvb_usb_generic_write(d, buf, buflen)) {
|
||||
err("failed to load bcm4500 firmware.");
|
||||
release_firmware(fw);
|
||||
kfree(buf);
|
||||
return -EIO;
|
||||
}
|
||||
ptr += buflen;
|
||||
}
|
||||
release_firmware(fw);
|
||||
kfree(buf);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
{
|
||||
u8 status, buf;
|
||||
if (onoff) {
|
||||
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
|
||||
if (! (status & 0x01)) /* started */
|
||||
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
|
||||
return -EINVAL;
|
||||
|
||||
if (! (status & 0x02)) /* BCM4500 firmware loaded */
|
||||
if(gp8psk_load_bcm4500fw(d))
|
||||
return EINVAL;
|
||||
|
||||
if (! (status & 0x04)) /* LNB Power */
|
||||
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
|
||||
&buf, 1))
|
||||
return EINVAL;
|
||||
|
||||
/* Set DVB mode */
|
||||
if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
|
||||
return -EINVAL;
|
||||
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
|
||||
} else {
|
||||
/* Turn off LNB power */
|
||||
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
|
||||
return EINVAL;
|
||||
/* Turn off 8psk power */
|
||||
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
|
||||
return -EINVAL;
|
||||
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int gp8psk_streaming_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
{
|
||||
return gp8psk_usb_out_op(d, ARM_TRANSFER, onoff, 0 , NULL, 0);
|
||||
}
|
||||
|
||||
static int gp8psk_frontend_attach(struct dvb_usb_device *d)
|
||||
{
|
||||
d->fe = gp8psk_fe_attach(d);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct dvb_usb_properties gp8psk_properties;
|
||||
|
||||
static int gp8psk_usb_probe(struct usb_interface *intf,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
|
||||
}
|
||||
|
||||
static struct usb_device_id gp8psk_usb_table [] = {
|
||||
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) },
|
||||
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) },
|
||||
{ 0 },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
|
||||
|
||||
static struct dvb_usb_properties gp8psk_properties = {
|
||||
.caps = 0,
|
||||
|
||||
.usb_ctrl = CYPRESS_FX2,
|
||||
.firmware = "dvb-usb-gp8psk-01.fw",
|
||||
|
||||
.streaming_ctrl = gp8psk_streaming_ctrl,
|
||||
.power_ctrl = gp8psk_power_ctrl,
|
||||
.frontend_attach = gp8psk_frontend_attach,
|
||||
|
||||
.generic_bulk_ctrl_endpoint = 0x01,
|
||||
/* parameter for the MPEG2-data transfer */
|
||||
.urb = {
|
||||
.type = DVB_USB_BULK,
|
||||
.count = 7,
|
||||
.endpoint = 0x82,
|
||||
.u = {
|
||||
.bulk = {
|
||||
.buffersize = 8192,
|
||||
}
|
||||
}
|
||||
},
|
||||
|
||||
.num_device_descs = 1,
|
||||
.devices = {
|
||||
{ .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver",
|
||||
.cold_ids = { &gp8psk_usb_table[0], NULL },
|
||||
.warm_ids = { &gp8psk_usb_table[1], NULL },
|
||||
},
|
||||
{ 0 },
|
||||
}
|
||||
};
|
||||
|
||||
/* usb specific object needed to register this driver with the usb subsystem */
|
||||
static struct usb_driver gp8psk_usb_driver = {
|
||||
.name = "dvb_usb_gp8psk",
|
||||
.probe = gp8psk_usb_probe,
|
||||
.disconnect = dvb_usb_device_exit,
|
||||
.id_table = gp8psk_usb_table,
|
||||
};
|
||||
|
||||
/* module stuff */
|
||||
static int __init gp8psk_usb_module_init(void)
|
||||
{
|
||||
int result;
|
||||
if ((result = usb_register(&gp8psk_usb_driver))) {
|
||||
err("usb_register failed. (%d)",result);
|
||||
return result;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit gp8psk_usb_module_exit(void)
|
||||
{
|
||||
/* deregister this driver from the USB subsystem */
|
||||
usb_deregister(&gp8psk_usb_driver);
|
||||
}
|
||||
|
||||
module_init(gp8psk_usb_module_init);
|
||||
module_exit(gp8psk_usb_module_exit);
|
||||
|
||||
MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
|
||||
MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0");
|
||||
MODULE_VERSION("1.0");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,79 @@
|
|||
/* DVB USB compliant Linux driver for the
|
||||
* - GENPIX 8pks/qpsk USB2.0 DVB-S module
|
||||
*
|
||||
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
|
||||
*
|
||||
* Thanks to GENPIX for the sample code used to implement this module.
|
||||
*
|
||||
* This module is based off the vp7045 and vp702x modules
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation, version 2.
|
||||
*
|
||||
* see Documentation/dvb/README.dvb-usb for more information
|
||||
*/
|
||||
#ifndef _DVB_USB_GP8PSK_H_
|
||||
#define _DVB_USB_GP8PSK_H_
|
||||
|
||||
#define DVB_USB_LOG_PREFIX "gp8psk"
|
||||
#include "dvb-usb.h"
|
||||
|
||||
extern int dvb_usb_gp8psk_debug;
|
||||
#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args)
|
||||
#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
|
||||
#define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args)
|
||||
#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args)
|
||||
/* gp8psk commands */
|
||||
|
||||
/* Twinhan Vendor requests */
|
||||
#define TH_COMMAND_IN 0xC0
|
||||
#define TH_COMMAND_OUT 0xC1
|
||||
|
||||
/* command bytes */
|
||||
#define GET_8PSK_CONFIG 0x80
|
||||
#define SET_8PSK_CONFIG 0x81
|
||||
#define ARM_TRANSFER 0x85
|
||||
#define TUNE_8PSK 0x86
|
||||
#define GET_SIGNAL_STRENGTH 0x87
|
||||
#define LOAD_BCM4500 0x88
|
||||
#define BOOT_8PSK 0x89
|
||||
#define START_INTERSIL 0x8A
|
||||
#define SET_LNB_VOLTAGE 0x8B
|
||||
#define SET_22KHZ_TONE 0x8C
|
||||
#define SEND_DISEQC_COMMAND 0x8D
|
||||
#define SET_DVB_MODE 0x8E
|
||||
#define SET_DN_SWITCH 0x8F
|
||||
#define GET_SIGNAL_LOCK 0x90
|
||||
|
||||
/* Satellite modulation modes */
|
||||
#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */
|
||||
#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */
|
||||
#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */
|
||||
#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */
|
||||
|
||||
#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */
|
||||
#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */
|
||||
#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */
|
||||
#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */
|
||||
#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */
|
||||
#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */
|
||||
|
||||
#define GET_USB_SPEED 0x07
|
||||
#define USB_SPEED_LOW 0
|
||||
#define USB_SPEED_FULL 1
|
||||
#define USB_SPEED_HIGH 2
|
||||
|
||||
#define RESET_FX2 0x13
|
||||
|
||||
#define FW_VERSION_READ 0x0B
|
||||
#define VENDOR_STRING_READ 0x0C
|
||||
#define PRODUCT_STRING_READ 0x0D
|
||||
#define FW_BCD_VERSION_READ 0x14
|
||||
|
||||
extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
|
||||
extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
|
||||
extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
|
||||
u16 index, u8 *b, int blen);
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue