ARM: dts: mx53: Remove 'enable-active-low' property

'enable-active-low' is not a valid property for a GPIO controlled regulator.

According to Documentation/devicetree/bindings/regulator/gpio-regulator.txt:

"Optional properties:
...
- enable-active-high	: Polarity of GPIO is active high (default is low)."

,so the correct way to define an active-low GPIO controlled regulator is to
simply not pass 'enable-active-high'.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx53-m53evk.dts

@@ -103,7 +103,6 @@ reg_usbh1_vbus: regulator@3 {
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 2 0>;
-			enable-active-low;
 		};
 	};
 

arch/arm/boot/dts/imx53-mba53.dts

@@ -46,7 +46,6 @@ reg_backlight: regulator@0 {
 			regulator-name = "lcd-supply";
 			gpio = <&gpio2 5 0>;
 			startup-delay-us = <5000>;
-			enable-active-low;
 		};
 
 		reg_3p2v: regulator@1 {

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -96,7 +96,6 @@ reg_can_xcvr: regulator@2 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_can_xcvr>;
 			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-			enable-active-low;
 		};
 
 		reg_usbh1_vbus: regulator@3 {