mirror of https://gitee.com/openkylin/linux.git
ARM: SoC fixes for v5.10, part 2
Around one third of the fixes this time are for dts files that list their ethernet controller as using 'phy-mode="rgmii"' but are changed to 'phy-mode="rgmii-id"' now, because the PHY drivers (realtek, ksz9031, dp83867, ...) now configure the internal delay based on that when they used to stay on the hardware default. The long story is archived at https://lore.kernel.org/netdev/CAMj1kXEEF_Un-4NTaD5iUN0NoZYaJQn-rPediX0S6oRiuVuW-A@mail.gmail.com/ I was trying to hold off on the bugfixes until there was a solution that would avoid breaking all boards, but that does not seem to be happening any time soon, so I am now sending the correct version of the dts files to ensure that at least these machines can use their network devices again. The other changes this time are: - Updating the MAINTAINER lists for Allwinner and Samsung SoCs - Multiple i.MX8MN machines get updates for their CPU operating points to match the data sheet - A revert for a dts patch that caused a regression in USB support on Odroid U3 - Two fixes for the AMD Tee driver, addressing a memory leak and missing locking - Mark the network subsystem on qoriq-fman3 as cache coherent for correctness as better performance. - Minor dts fixes elsewhere, addressing dtc warnings and similar problems Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl+yqIMACgkQmmx57+YA GNniQxAAnv8RAPMt8Jv4tyA0RshkD5+6JtgD6KfYccbI5Df+1O3YKJm90SA4Tpwg 03GHpAsgIs9SYNP7gSs9HPYCOJwC4rmgmfbnbB4Ezpr+oe+w6C8FI7160BBgb4f8 3/0LC6YyF48SPJ40lF/GOnTLbD5hxGw08oHCh/oL+b+bwn21JZoXAtkloCz8o6Ax u98G5MAaJhoTFaE3jq+8F1t6PNJ518HTulzod7uLAjn4iQtAmE96J7q9ncwcGu6a HNNcAGuz7X5QfEwWuAJai8eWvtMyGLvB5x1LXjjCNKgIqG+cD1tqpQ3FMedi36fg N+fxMxTJKuvBaQ83h/yyNk4/W3h6ddTbuEH0s320xSP5eiZ4r+/2Ry3WPHxHR3Rq YYDFbN6I19pQmgedJhgEmUEJXMcyId4SqN85l+uB58lOzu4zGf4WwVd+CBnEoIu3 wMGHbwruP1t+4hvZjiga53iOzWTR2EzTYkKxfDrV3mPZY6gmov5Xjb0JZNl164WF 0IJEa61HKf/ueJ5UNwWXpObNyD9rD2Ucugvok/KC1s06NFKjebGK4JhwChxMN0Sk baynLGSDe8utENrYgW+KmgZTQHTEICimT5ogW7H+W3trXqxvTKpwCsv5zZM0e238 vULK/YGZLQZaZrxsCG2WylL6SlJQfptMy8wzOoKmbgTOkcsBasA= =Qgm/ -----END PGP SIGNATURE----- Merge tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Around one third of the fixes this time are for dts files that list their ethernet controller as using 'phy-mode="rgmii"' but are changed to 'phy-mode="rgmii-id"' now, because the PHY drivers (realtek, ksz9031, dp83867, ...) now configure the internal delay based on that when they used to stay on the hardware default. The long story is archived at https://lore.kernel.org/netdev/CAMj1kXEEF_Un-4NTaD5iUN0NoZYaJQn-rPediX0S6oRiuVuW-A@mail.gmail.com/ I was trying to hold off on the bugfixes until there was a solution that would avoid breaking all boards, but that does not seem to be happening any time soon, so I am now sending the correct version of the dts files to ensure that at least these machines can use their network devices again. The other changes this time are: - Updating the MAINTAINER lists for Allwinner and Samsung SoCs - Multiple i.MX8MN machines get updates for their CPU operating points to match the data sheet - A revert for a dts patch that caused a regression in USB support on Odroid U3 - Two fixes for the AMD Tee driver, addressing a memory leak and missing locking - Mark the network subsystem on qoriq-fman3 as cache coherent for correctness as better performance. - Minor dts fixes elsewhere, addressing dtc warnings and similar problems" * tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid" ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 arm64: dts: renesas: r8a774e1: Add missing audio_clk_b tee: amdtee: synchronize access to shm list tee: amdtee: fix memory leak due to reset of global shm list arm64: dts: agilex/stratix10: Fix qspi node compatible ARM: dts: imx6q-prti6q: fix PHY address ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up ...
This commit is contained in:
Linus Torvalds
commit
9c87c9f412
62
CREDITS
62
CREDITS
|
|
@ -98,7 +98,7 @@ N: Erik Andersen
|
|||
E: andersen@codepoet.org
|
||||
W: https://www.codepoet.org/
|
||||
P: 1024D/30D39057 1BC4 2742 E885 E4DE 9301 0C82 5F9B 643E 30D3 9057
|
||||
D: Maintainer of ide-cd and Uniform CD-ROM driver,
|
||||
D: Maintainer of ide-cd and Uniform CD-ROM driver,
|
||||
D: ATAPI CD-Changer support, Major 2.1.x CD-ROM update.
|
||||
S: 352 North 525 East
|
||||
S: Springville, Utah 84663
|
||||
|
|
@ -263,7 +263,7 @@ N: Paul Barton-Davis
|
|||
E: pbd@op.net
|
||||
D: Driver for WaveFront soundcards (Turtle Beach Maui, Tropez, Tropez+)
|
||||
D: Various bugfixes and changes to sound drivers
|
||||
S: USA
|
||||
S: USA
|
||||
|
||||
N: Carlos Henrique Bauer
|
||||
E: chbauer@acm.org
|
||||
|
|
@ -849,6 +849,12 @@ D: trivial hack to add variable address length routing to Rose.
|
|||
D: AX25-HOWTO, HAM-HOWTO, IPX-HOWTO, NET-2-HOWTO
|
||||
D: ax25-utils maintainer.
|
||||
|
||||
N: Kamil Debski
|
||||
E: kamil@wypas.org
|
||||
D: Samsung S5P 2D graphics acceleration and Multi Format Codec drivers
|
||||
D: Samsung USB2 phy drivers
|
||||
D: PWM fan driver
|
||||
|
||||
N: Helge Deller
|
||||
E: deller@gmx.de
|
||||
W: http://www.parisc-linux.org/
|
||||
|
|
@ -1199,7 +1205,7 @@ N: Daniel J. Frasnelli
|
|||
E: dfrasnel@alphalinux.org
|
||||
W: http://www.alphalinux.org/
|
||||
P: 1024/3EF87611 B9 F1 44 50 D3 E8 C2 80 DA E5 55 AA 56 7C 42 DA
|
||||
D: DEC Alpha hacker
|
||||
D: DEC Alpha hacker
|
||||
D: Miscellaneous bug squisher
|
||||
|
||||
N: Jim Freeman
|
||||
|
|
@ -1299,7 +1305,7 @@ S: P.O. Box 76, Epping
|
|||
S: New South Wales, 2121
|
||||
S: Australia
|
||||
|
||||
N: Carlos E. Gorges
|
||||
N: Carlos E. Gorges
|
||||
E: carlos@techlinux.com.br
|
||||
D: fix smp support on cmpci driver
|
||||
P: 2048G/EA3C4B19 FF31 33A6 0362 4915 B7EB E541 17D0 0379 EA3C 4B19
|
||||
|
|
@ -1340,7 +1346,7 @@ E: wgreathouse@smva.com
|
|||
E: wgreathouse@myfavoritei.com
|
||||
D: Current Belkin USB Serial Adapter F5U103 hacker
|
||||
D: Kernel hacker, embedded systems
|
||||
S: 7802 Fitzwater Road
|
||||
S: 7802 Fitzwater Road
|
||||
S: Brecksville, OH 44141-1334
|
||||
S: USA
|
||||
|
||||
|
|
@ -1381,7 +1387,7 @@ N: Grant Guenther
|
|||
E: grant@torque.net
|
||||
W: http://www.torque.net/linux-pp.html
|
||||
D: original author of ppa driver for parallel port ZIP drive
|
||||
D: original architect of the parallel-port sharing scheme
|
||||
D: original architect of the parallel-port sharing scheme
|
||||
D: PARIDE subsystem: drivers for parallel port IDE & ATAPI devices
|
||||
S: 44 St. Joseph Street, Suite 506
|
||||
S: Toronto, Ontario, M4Y 2W4
|
||||
|
|
@ -1523,7 +1529,7 @@ N: Benjamin Herrenschmidt
|
|||
E: benh@kernel.crashing.org
|
||||
D: Various parts of PPC/PPC64 & PowerMac
|
||||
S: 312/107 Canberra Avenue
|
||||
S: Griffith, ACT 2603
|
||||
S: Griffith, ACT 2603
|
||||
S: Australia
|
||||
|
||||
N: Andreas Herrmann
|
||||
|
|
@ -1825,7 +1831,7 @@ S: Hungary
|
|||
N: Bernhard Kaindl
|
||||
E: bkaindl@netway.at
|
||||
E: edv@bartelt.via.at
|
||||
D: Author of a menu based configuration tool, kmenu, which
|
||||
D: Author of a menu based configuration tool, kmenu, which
|
||||
D: is the predecessor of 'make menuconfig' and 'make xconfig'.
|
||||
D: digiboard driver update(modularisation work and 2.1.x upd)
|
||||
S: Tallak 95
|
||||
|
|
@ -2016,7 +2022,7 @@ W: http://www.xos.nl/
|
|||
D: IP transparent proxy support
|
||||
S: X/OS Experts in Open Systems BV
|
||||
S: Kruislaan 419
|
||||
S: 1098 VA Amsterdam
|
||||
S: 1098 VA Amsterdam
|
||||
S: The Netherlands
|
||||
|
||||
N: Goran Koruga
|
||||
|
|
@ -2088,7 +2094,7 @@ S: Germany
|
|||
|
||||
N: Andrzej M. Krzysztofowicz
|
||||
E: ankry@mif.pg.gda.pl
|
||||
D: Some 8-bit XT disk driver and devfs hacking
|
||||
D: Some 8-bit XT disk driver and devfs hacking
|
||||
D: Aladdin 1533/1543(C) chipset IDE
|
||||
D: PIIX chipset IDE
|
||||
S: ul. Matemblewska 1B/10
|
||||
|
|
@ -2463,7 +2469,7 @@ E: mge@EZ-Darmstadt.Telekom.de
|
|||
D: Logical Volume Manager
|
||||
S: Bartningstr. 12
|
||||
S: 64289 Darmstadt
|
||||
S: Germany
|
||||
S: Germany
|
||||
|
||||
N: Mark W. McClelland
|
||||
E: mmcclell@bigfoot.com
|
||||
|
|
@ -2547,7 +2553,7 @@ E: meskes@debian.org
|
|||
P: 1024/04B6E8F5 6C 77 33 CA CC D6 22 03 AB AB 15 A3 AE AD 39 7D
|
||||
D: Kernel hacker. PostgreSQL hacker. Software watchdog daemon.
|
||||
D: Maintainer of several Debian packages
|
||||
S: Th.-Heuss-Str. 61
|
||||
S: Th.-Heuss-Str. 61
|
||||
S: D-41812 Erkelenz
|
||||
S: Germany
|
||||
|
||||
|
|
@ -2785,7 +2791,7 @@ E: neuffer@goofy.zdv.uni-mainz.de
|
|||
W: http://www.i-Connect.Net/~mike/
|
||||
D: Developer and maintainer of the EATA-DMA SCSI driver
|
||||
D: Co-developer EATA-PIO SCSI driver
|
||||
D: /proc/scsi and assorted other snippets
|
||||
D: /proc/scsi and assorted other snippets
|
||||
S: Zum Schiersteiner Grund 2
|
||||
S: 55127 Mainz
|
||||
S: Germany
|
||||
|
|
@ -2852,6 +2858,10 @@ D: IPX development and support
|
|||
N: Venkatesh Pallipadi (Venki)
|
||||
D: x86/HPET
|
||||
|
||||
N: Kyungmin Park
|
||||
E: kyungmin.park@samsung.com
|
||||
D: Samsung S5Pv210 and Exynos4210 mobile platforms
|
||||
|
||||
N: David Parsons
|
||||
E: orc@pell.chi.il.us
|
||||
D: improved memory detection code.
|
||||
|
|
@ -3019,7 +3029,7 @@ D: Embedded PowerPC 4xx/6xx/7xx/74xx support
|
|||
S: Chandler, Arizona 85249
|
||||
S: USA
|
||||
|
||||
N: Frederic Potter
|
||||
N: Frederic Potter
|
||||
E: fpotter@cirpack.com
|
||||
D: Some PCI kernel support
|
||||
|
||||
|
|
@ -3452,21 +3462,21 @@ S: Klosterweg 28 / i309
|
|||
S: 76131 Karlsruhe
|
||||
S: Germany
|
||||
|
||||
N: James Simmons
|
||||
N: James Simmons
|
||||
E: jsimmons@infradead.org
|
||||
E: jsimmons@users.sf.net
|
||||
E: jsimmons@users.sf.net
|
||||
D: Frame buffer device maintainer
|
||||
D: input layer development
|
||||
D: tty/console layer
|
||||
D: various mipsel devices
|
||||
S: 115 Carmel Avenue
|
||||
D: various mipsel devices
|
||||
S: 115 Carmel Avenue
|
||||
S: El Cerrito CA 94530
|
||||
S: USA
|
||||
S: USA
|
||||
|
||||
N: Jaspreet Singh
|
||||
E: jaspreet@sangoma.com
|
||||
W: www.sangoma.com
|
||||
D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards
|
||||
D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards
|
||||
S: Sangoma Technologies Inc.,
|
||||
S: 1001 Denison Street
|
||||
S: Suite 101
|
||||
|
|
@ -3490,7 +3500,7 @@ N: Craig Small
|
|||
E: csmall@triode.apana.org.au
|
||||
E: vk2xlz@gonzo.vk2xlz.ampr.org (packet radio)
|
||||
D: Gracilis PackeTwin device driver
|
||||
D: RSPF daemon
|
||||
D: RSPF daemon
|
||||
S: 10 Stockalls Place
|
||||
S: Minto, NSW, 2566
|
||||
S: Australia
|
||||
|
|
@ -3700,7 +3710,7 @@ N: Tsu-Sheng Tsao
|
|||
E: tsusheng@scf.usc.edu
|
||||
D: IGMP(Internet Group Management Protocol) version 2
|
||||
S: 2F 14 ALY 31 LN 166 SEC 1 SHIH-PEI RD
|
||||
S: Taipei
|
||||
S: Taipei
|
||||
S: Taiwan 112
|
||||
S: Republic of China
|
||||
S: 24335 Delta Drive
|
||||
|
|
@ -3861,7 +3871,7 @@ D: Produced the Slackware distribution, updated the SVGAlib
|
|||
D: patches for ghostscript, worked on color 'ls', etc.
|
||||
S: 301 15th Street S.
|
||||
S: Moorhead, Minnesota 56560
|
||||
S: USA
|
||||
S: USA
|
||||
|
||||
N: Jos Vos
|
||||
E: jos@xos.nl
|
||||
|
|
@ -3869,7 +3879,7 @@ W: http://www.xos.nl/
|
|||
D: Various IP firewall updates, ipfwadm
|
||||
S: X/OS Experts in Open Systems BV
|
||||
S: Kruislaan 419
|
||||
S: 1098 VA Amsterdam
|
||||
S: 1098 VA Amsterdam
|
||||
S: The Netherlands
|
||||
|
||||
N: Jeroen Vreeken
|
||||
|
|
@ -4107,7 +4117,7 @@ S: People's Repulic of China
|
|||
N: Victor Yodaiken
|
||||
E: yodaiken@fsmlabs.com
|
||||
D: RTLinux (RealTime Linux)
|
||||
S: POB 1822
|
||||
S: POB 1822
|
||||
S: Socorro NM, 87801
|
||||
S: USA
|
||||
|
||||
|
|
@ -4205,7 +4215,7 @@ D: EISA/sysfs subsystem
|
|||
S: France
|
||||
|
||||
# Don't add your name here, unless you really _are_ after Marc
|
||||
# alphabetically. Leonard used to be very proud of being the
|
||||
# alphabetically. Leonard used to be very proud of being the
|
||||
# last entry, and he'll get positively pissed if he can't even
|
||||
# be second-to-last. (and this file really _is_ supposed to be
|
||||
# in alphabetic order)
|
||||
|
|
|
|||
19
MAINTAINERS
19
MAINTAINERS
|
|
@ -1546,6 +1546,7 @@ F: drivers/clk/sunxi/
|
|||
ARM/Allwinner sunXi SoC support
|
||||
M: Maxime Ripard <mripard@kernel.org>
|
||||
M: Chen-Yu Tsai <wens@csie.org>
|
||||
R: Jernej Skrabec <jernej.skrabec@siol.net>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
|
||||
|
|
@ -2374,7 +2375,7 @@ F: drivers/i2c/busses/i2c-rk3x.c
|
|||
F: sound/soc/rockchip/
|
||||
N: rockchip
|
||||
|
||||
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
|
||||
ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
|
||||
M: Krzysztof Kozlowski <krzk@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
L: linux-samsung-soc@vger.kernel.org
|
||||
|
|
@ -2403,15 +2404,7 @@ N: s3c2410
|
|||
N: s3c64xx
|
||||
N: s5pv210
|
||||
|
||||
ARM/SAMSUNG MOBILE MACHINE SUPPORT
|
||||
M: Kyungmin Park <kyungmin.park@samsung.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: arch/arm/mach-s5pv210/
|
||||
|
||||
ARM/SAMSUNG S5P SERIES 2D GRAPHICS ACCELERATION (G2D) SUPPORT
|
||||
M: Kyungmin Park <kyungmin.park@samsung.com>
|
||||
M: Kamil Debski <kamil@wypas.org>
|
||||
M: Andrzej Hajda <a.hajda@samsung.com>
|
||||
L: linux-arm-kernel@lists.infradead.org
|
||||
L: linux-media@vger.kernel.org
|
||||
|
|
@ -2436,9 +2429,6 @@ S: Maintained
|
|||
F: drivers/media/platform/s5p-jpeg/
|
||||
|
||||
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
|
||||
M: Kyungmin Park <kyungmin.park@samsung.com>
|
||||
M: Kamil Debski <kamil@wypas.org>
|
||||
M: Jeongtae Park <jtp.park@samsung.com>
|
||||
M: Andrzej Hajda <a.hajda@samsung.com>
|
||||
L: linux-arm-kernel@lists.infradead.org
|
||||
L: linux-media@vger.kernel.org
|
||||
|
|
@ -14211,7 +14201,6 @@ F: drivers/media/usb/pwc/*
|
|||
F: include/trace/events/pwc.h
|
||||
|
||||
PWM FAN DRIVER
|
||||
M: Kamil Debski <kamil@wypas.org>
|
||||
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
||||
L: linux-hwmon@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
@ -15425,14 +15414,12 @@ F: Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
|
|||
F: drivers/nfc/s3fwrn5
|
||||
|
||||
SAMSUNG S5C73M3 CAMERA DRIVER
|
||||
M: Kyungmin Park <kyungmin.park@samsung.com>
|
||||
M: Andrzej Hajda <a.hajda@samsung.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/media/i2c/s5c73m3/*
|
||||
|
||||
SAMSUNG S5K5BAF CAMERA DRIVER
|
||||
M: Kyungmin Park <kyungmin.park@samsung.com>
|
||||
M: Andrzej Hajda <a.hajda@samsung.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
@ -15450,7 +15437,6 @@ F: Documentation/devicetree/bindings/crypto/samsung-sss.yaml
|
|||
F: drivers/crypto/s5p-sss.c
|
||||
|
||||
SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
|
||||
M: Kyungmin Park <kyungmin.park@samsung.com>
|
||||
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
@ -15498,7 +15484,6 @@ T: git https://github.com/lmajewski/linux-samsung-thermal.git
|
|||
F: drivers/thermal/samsung/
|
||||
|
||||
SAMSUNG USB2 PHY DRIVER
|
||||
M: Kamil Debski <kamil@wypas.org>
|
||||
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
|
|||
|
|
@ -122,7 +122,6 @@ &camera {
|
|||
};
|
||||
|
||||
&clock {
|
||||
clocks = <&clock CLK_XUSBXTI>;
|
||||
assigned-clocks = <&clock CLK_FOUT_EPLL>;
|
||||
assigned-clock-rates = <45158401>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00
|
|||
MX50_PAD_CSPI_MISO__CSPI_MISO 0x00
|
||||
MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00
|
||||
MX50_PAD_CSPI_SS0__GPIO4_11 0xc4
|
||||
MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4
|
||||
MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -213,8 +213,8 @@ mdio {
|
|||
#size-cells = <0>;
|
||||
|
||||
/* Microchip KSZ9031RNX PHY */
|
||||
rgmii_phy: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
rgmii_phy: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
|
|
|
|||
|
|
@ -98,7 +98,7 @@ sound {
|
|||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -46,6 +46,16 @@ button-0 {
|
|||
linux,code = <KEY_A>;
|
||||
gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/*
|
||||
* The EXTi IRQ line 0 is shared with PMIC,
|
||||
* so mark this as polled GPIO key.
|
||||
*/
|
||||
button-2 {
|
||||
label = "TA3-GPIO-C";
|
||||
linux,code = <KEY_C>;
|
||||
gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
|
|
@ -59,13 +69,6 @@ button-1 {
|
|||
wakeup-source;
|
||||
};
|
||||
|
||||
button-2 {
|
||||
label = "TA3-GPIO-C";
|
||||
linux,code = <KEY_C>;
|
||||
gpios = <&gpioi 11 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-3 {
|
||||
label = "TA4-GPIO-D";
|
||||
linux,code = <KEY_D>;
|
||||
|
|
@ -79,7 +82,7 @@ led {
|
|||
|
||||
led-0 {
|
||||
label = "green:led5";
|
||||
gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -68,6 +68,7 @@ ethernet_vio: vioregulator {
|
|||
gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vdd>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -202,6 +203,7 @@ v3v3: buck4 {
|
|||
|
||||
vdda: ldo1 {
|
||||
regulator-name = "vdda";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
|
|
|
|||
|
|
@ -21,6 +21,10 @@ memory@c0000000 {
|
|||
};
|
||||
};
|
||||
|
||||
&dts {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
|
|
|
|||
|
|
@ -154,7 +154,7 @@ &gmac {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_rgmii_pins>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -130,7 +130,7 @@ &gmac {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_rgmii_pins>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -151,7 +151,7 @@ &gmac {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_rgmii_pins>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -131,7 +131,7 @@ &emac {
|
|||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_sw>;
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
allwinner,rx-delay-ps = <700>;
|
||||
allwinner,tx-delay-ps = <700>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -183,7 +183,7 @@ &emac {
|
|||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_dldo4>;
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -53,11 +53,6 @@ aliases {
|
|||
};
|
||||
};
|
||||
|
||||
&emac {
|
||||
/* LEDs changed to active high on the plus */
|
||||
/delete-property/ allwinner,leds-active-low;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
|
|
|
|||
|
|
@ -67,7 +67,7 @@ &emac {
|
|||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -129,7 +129,7 @@ &gmac {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_rgmii_pins>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <®_dc1sw>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -129,7 +129,7 @@ &gmac {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_rgmii_pins>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <®_cldo1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -124,7 +124,7 @@ &gmac {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_rgmii_pins>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <®_cldo1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -126,7 +126,7 @@ &emac {
|
|||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -406,6 +406,9 @@ i2c@4 {
|
|||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
clock-frequency = <5000000>;
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
|
||||
|
|
|
|||
|
|
@ -105,7 +105,7 @@ &ehci1 {
|
|||
&emac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-supply = <®_dc1sw>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -120,7 +120,7 @@ &ehci1 {
|
|||
&emac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ / {
|
|||
&emac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-txid";
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -122,9 +122,6 @@ &csi {
|
|||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
csi_ep: endpoint {
|
||||
remote-endpoint = <&ov5640_ep>;
|
||||
bus-width = <8>;
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ &emac {
|
|||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
/delete-property/ allwinner,leds-active-low;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -123,7 +123,7 @@ &emac {
|
|||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -124,7 +124,7 @@ &emac {
|
|||
pinctrl-0 = <&emac_rgmii_pins>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -97,7 +97,7 @@ &ehci0 {
|
|||
&emac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ext_rgmii_pins>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-supply = <®_aldo2>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -100,7 +100,7 @@ &ehci3 {
|
|||
&emac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ext_rgmii_pins>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
allwinner,rx-delay-ps = <200>;
|
||||
|
|
|
|||
|
|
@ -159,7 +159,7 @@ &qspi {
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "n25q00a";
|
||||
compatible = "micron,mt25qu02g", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -192,7 +192,7 @@ &qspi {
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "n25q00a";
|
||||
compatible = "micron,mt25qu02g", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -1012,6 +1012,7 @@ rcpm: power-controller@1e34040 {
|
|||
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
|
||||
reg = <0x0 0x1e34040 0x0 0x1c>;
|
||||
#fsl,rcpm-wakeup-cells = <7>;
|
||||
little-endian;
|
||||
};
|
||||
|
||||
ftm_alarm0: timer@2800000 {
|
||||
|
|
|
|||
|
|
@ -805,6 +805,7 @@ rcpm: power-controller@1e34040 {
|
|||
compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
|
||||
reg = <0x0 0x1e34040 0x0 0x18>;
|
||||
#fsl,rcpm-wakeup-cells = <6>;
|
||||
little-endian;
|
||||
};
|
||||
|
||||
ftm_alarm0: timer@2800000 {
|
||||
|
|
|
|||
|
|
@ -892,6 +892,7 @@ rcpm: power-controller@1e34040 {
|
|||
compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
|
||||
reg = <0x0 0x1e34040 0x0 0x18>;
|
||||
#fsl,rcpm-wakeup-cells = <6>;
|
||||
little-endian;
|
||||
};
|
||||
|
||||
ftm_alarm0: timer@2800000 {
|
||||
|
|
|
|||
|
|
@ -72,6 +72,7 @@ &i2c1 {
|
|||
pmic@4b {
|
||||
compatible = "rohm,bd71847";
|
||||
reg = <0x4b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
@ -210,6 +211,7 @@ bluetooth {
|
|||
host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
|
||||
device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
|
||||
clocks = <&osc_32k>;
|
||||
max-speed = <4000000>;
|
||||
clock-names = "extclk";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ &i2c1 {
|
|||
pmic@4b {
|
||||
compatible = "rohm,bd71847";
|
||||
reg = <0x4b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
|
|||
|
|
@ -135,13 +135,10 @@ &i2c1 {
|
|||
pmic@4b {
|
||||
compatible = "rohm,bd71847";
|
||||
reg = <0x4b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
/*
|
||||
* The interrupt is not correct. It should be level low,
|
||||
* however with internal pull up this causes IRQ storm.
|
||||
*/
|
||||
interrupts = <8 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
rohm,reset-snvs-powered;
|
||||
|
||||
#clock-cells = <0>;
|
||||
|
|
@ -398,7 +395,7 @@ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
|||
|
||||
pinctrl_pmic: pmicirqgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x41
|
||||
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -129,7 +129,7 @@ opp-1200000000 {
|
|||
|
||||
opp-1600000000 {
|
||||
opp-hz = /bits/ 64 <1600000000>;
|
||||
opp-microvolt = <900000>;
|
||||
opp-microvolt = <950000>;
|
||||
opp-supported-hw = <0xc>, <0x7>;
|
||||
clock-latency-ns = <150000>;
|
||||
opp-suspend;
|
||||
|
|
|
|||
|
|
@ -53,6 +53,7 @@ &i2c1 {
|
|||
pmic@4b {
|
||||
compatible = "rohm,bd71847";
|
||||
reg = <0x4b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
|
|||
|
|
@ -18,6 +18,7 @@ &i2c1 {
|
|||
pmic: pmic@25 {
|
||||
compatible = "nxp,pca9450b";
|
||||
reg = <0x25>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
|
|||
|
|
@ -116,13 +116,10 @@ &i2c1 {
|
|||
pmic@4b {
|
||||
compatible = "rohm,bd71847";
|
||||
reg = <0x4b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
/*
|
||||
* The interrupt is not correct. It should be level low,
|
||||
* however with internal pull up this causes IRQ storm.
|
||||
*/
|
||||
interrupts = <8 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
rohm,reset-snvs-powered;
|
||||
|
||||
regulators {
|
||||
|
|
@ -388,7 +385,7 @@ MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
|||
|
||||
pinctrl_pmic: pmicirqgrp {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x101
|
||||
MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -790,28 +790,6 @@ usbmisc1: usbmisc@32e40200 {
|
|||
#index-cells = <1>;
|
||||
reg = <0x32e40200 0x200>;
|
||||
};
|
||||
|
||||
usbotg2: usb@32e50000 {
|
||||
compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
|
||||
reg = <0x32e50000 0x200>;
|
||||
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
|
||||
clock-names = "usb1_ctrl_root_clk";
|
||||
assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
|
||||
<&clk IMX8MN_CLK_USB_CORE_REF>;
|
||||
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
|
||||
<&clk IMX8MN_SYS_PLL1_100M>;
|
||||
fsl,usbphy = <&usbphynop2>;
|
||||
fsl,usbmisc = <&usbmisc2 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usbmisc2: usbmisc@32e50200 {
|
||||
compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
|
||||
#index-cells = <1>;
|
||||
reg = <0x32e50200 0x200>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
dma_apbh: dma-controller@33000000 {
|
||||
|
|
@ -876,12 +854,4 @@ usbphynop1: usbphynop1 {
|
|||
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
|
||||
clock-names = "main_clk";
|
||||
};
|
||||
|
||||
usbphynop2: usbphynop2 {
|
||||
compatible = "usb-nop-xceiv";
|
||||
clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
|
||||
assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
|
||||
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
|
||||
clock-names = "main_clk";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ fman0: fman@1a00000 {
|
|||
clock-names = "fmanclk";
|
||||
fsl,qman-channel-range = <0x800 0x10>;
|
||||
ptimer-handle = <&ptp_timer0>;
|
||||
dma-coherent;
|
||||
|
||||
muram@0 {
|
||||
compatible = "fsl,fman-muram";
|
||||
|
|
|
|||
|
|
@ -110,7 +110,7 @@ &qspi {
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mt25qu02g";
|
||||
compatible = "micron,mt25qu02g", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -28,6 +28,12 @@ audio_clk_a: audio_clk_a {
|
|||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
audio_clk_b: audio_clk_b {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
audio_clk_c: audio_clk_c {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -64,9 +64,13 @@ struct amdtee_session {
|
|||
/**
|
||||
* struct amdtee_context_data - AMD-TEE driver context data
|
||||
* @sess_list: Keeps track of sessions opened in current TEE context
|
||||
* @shm_list: Keeps track of buffers allocated and mapped in current TEE
|
||||
* context
|
||||
*/
|
||||
struct amdtee_context_data {
|
||||
struct list_head sess_list;
|
||||
struct list_head shm_list;
|
||||
struct mutex shm_mutex; /* synchronizes access to @shm_list */
|
||||
};
|
||||
|
||||
struct amdtee_driver_data {
|
||||
|
|
@ -89,10 +93,6 @@ struct amdtee_shm_data {
|
|||
u32 buf_id;
|
||||
};
|
||||
|
||||
struct amdtee_shm_context {
|
||||
struct list_head shmdata_list;
|
||||
};
|
||||
|
||||
#define LOWER_TWO_BYTE_MASK 0x0000FFFF
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -20,7 +20,6 @@
|
|||
|
||||
static struct amdtee_driver_data *drv_data;
|
||||
static DEFINE_MUTEX(session_list_mutex);
|
||||
static struct amdtee_shm_context shmctx;
|
||||
|
||||
static void amdtee_get_version(struct tee_device *teedev,
|
||||
struct tee_ioctl_version_data *vers)
|
||||
|
|
@ -42,7 +41,8 @@ static int amdtee_open(struct tee_context *ctx)
|
|||
return -ENOMEM;
|
||||
|
||||
INIT_LIST_HEAD(&ctxdata->sess_list);
|
||||
INIT_LIST_HEAD(&shmctx.shmdata_list);
|
||||
INIT_LIST_HEAD(&ctxdata->shm_list);
|
||||
mutex_init(&ctxdata->shm_mutex);
|
||||
|
||||
ctx->data = ctxdata;
|
||||
return 0;
|
||||
|
|
@ -86,6 +86,7 @@ static void amdtee_release(struct tee_context *ctx)
|
|||
list_del(&sess->list_node);
|
||||
release_session(sess);
|
||||
}
|
||||
mutex_destroy(&ctxdata->shm_mutex);
|
||||
kfree(ctxdata);
|
||||
|
||||
ctx->data = NULL;
|
||||
|
|
@ -152,14 +153,17 @@ static struct amdtee_session *find_session(struct amdtee_context_data *ctxdata,
|
|||
|
||||
u32 get_buffer_id(struct tee_shm *shm)
|
||||
{
|
||||
u32 buf_id = 0;
|
||||
struct amdtee_context_data *ctxdata = shm->ctx->data;
|
||||
struct amdtee_shm_data *shmdata;
|
||||
u32 buf_id = 0;
|
||||
|
||||
list_for_each_entry(shmdata, &shmctx.shmdata_list, shm_node)
|
||||
mutex_lock(&ctxdata->shm_mutex);
|
||||
list_for_each_entry(shmdata, &ctxdata->shm_list, shm_node)
|
||||
if (shmdata->kaddr == shm->kaddr) {
|
||||
buf_id = shmdata->buf_id;
|
||||
break;
|
||||
}
|
||||
mutex_unlock(&ctxdata->shm_mutex);
|
||||
|
||||
return buf_id;
|
||||
}
|
||||
|
|
@ -333,8 +337,9 @@ int amdtee_close_session(struct tee_context *ctx, u32 session)
|
|||
|
||||
int amdtee_map_shmem(struct tee_shm *shm)
|
||||
{
|
||||
struct shmem_desc shmem;
|
||||
struct amdtee_context_data *ctxdata;
|
||||
struct amdtee_shm_data *shmnode;
|
||||
struct shmem_desc shmem;
|
||||
int rc, count;
|
||||
u32 buf_id;
|
||||
|
||||
|
|
@ -362,7 +367,10 @@ int amdtee_map_shmem(struct tee_shm *shm)
|
|||
|
||||
shmnode->kaddr = shm->kaddr;
|
||||
shmnode->buf_id = buf_id;
|
||||
list_add(&shmnode->shm_node, &shmctx.shmdata_list);
|
||||
ctxdata = shm->ctx->data;
|
||||
mutex_lock(&ctxdata->shm_mutex);
|
||||
list_add(&shmnode->shm_node, &ctxdata->shm_list);
|
||||
mutex_unlock(&ctxdata->shm_mutex);
|
||||
|
||||
pr_debug("buf_id :[%x] kaddr[%p]\n", shmnode->buf_id, shmnode->kaddr);
|
||||
|
||||
|
|
@ -371,6 +379,7 @@ int amdtee_map_shmem(struct tee_shm *shm)
|
|||
|
||||
void amdtee_unmap_shmem(struct tee_shm *shm)
|
||||
{
|
||||
struct amdtee_context_data *ctxdata;
|
||||
struct amdtee_shm_data *shmnode;
|
||||
u32 buf_id;
|
||||
|
||||
|
|
@ -381,12 +390,15 @@ void amdtee_unmap_shmem(struct tee_shm *shm)
|
|||
/* Unmap the shared memory from TEE */
|
||||
handle_unmap_shmem(buf_id);
|
||||
|
||||
list_for_each_entry(shmnode, &shmctx.shmdata_list, shm_node)
|
||||
ctxdata = shm->ctx->data;
|
||||
mutex_lock(&ctxdata->shm_mutex);
|
||||
list_for_each_entry(shmnode, &ctxdata->shm_list, shm_node)
|
||||
if (buf_id == shmnode->buf_id) {
|
||||
list_del(&shmnode->shm_node);
|
||||
kfree(shmnode);
|
||||
break;
|
||||
}
|
||||
mutex_unlock(&ctxdata->shm_mutex);
|
||||
}
|
||||
|
||||
int amdtee_invoke_func(struct tee_context *ctx,
|
||||
|
|
|
|||
Loading…
Reference in New Issue