mirror of https://gitee.com/openkylin/linux.git
Input: add Austria Microsystem AS5011 joystick driver
This is driver for EasyPoint AS5011 2 axis joystick chip. This chip is plugged on an I2C bus. Tested on ARM processor (i.MX27). Signed-off-by: Fabien Marteau <fabien.marteau@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Fabien Marteau
Dmitry Torokhov
parent
048fc018c8
commit
9d084a3d5d
|
|
@ -255,6 +255,16 @@ config JOYSTICK_AMIGA
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called amijoy.
|
||||
|
||||
config JOYSTICK_AS5011
|
||||
tristate "Austria Microsystem AS5011 joystick"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y here if you have an AS5011 digital joystick connected to your
|
||||
system.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called as5011.
|
||||
|
||||
config JOYSTICK_JOYDUMP
|
||||
tristate "Gameport data dumper"
|
||||
select GAMEPORT
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@
|
|||
obj-$(CONFIG_JOYSTICK_A3D) += a3d.o
|
||||
obj-$(CONFIG_JOYSTICK_ADI) += adi.o
|
||||
obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o
|
||||
obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o
|
||||
obj-$(CONFIG_JOYSTICK_ANALOG) += analog.o
|
||||
obj-$(CONFIG_JOYSTICK_COBRA) += cobra.o
|
||||
obj-$(CONFIG_JOYSTICK_DB9) += db9.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,367 @@
|
|||
/*
|
||||
* Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
|
||||
* Sponsored by ARMadeus Systems
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*
|
||||
* Driver for Austria Microsystems joysticks AS5011
|
||||
*
|
||||
* TODO:
|
||||
* - Power on the chip when open() and power down when close()
|
||||
* - Manage power mode
|
||||
*/
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/input/as5011.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
|
||||
#define MODULE_DEVICE_ALIAS "as5011"
|
||||
|
||||
MODULE_AUTHOR("Fabien Marteau <fabien.marteau@armadeus.com>");
|
||||
MODULE_DESCRIPTION(DRIVER_DESC);
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
/* registers */
|
||||
#define AS5011_CTRL1 0x76
|
||||
#define AS5011_CTRL2 0x75
|
||||
#define AS5011_XP 0x43
|
||||
#define AS5011_XN 0x44
|
||||
#define AS5011_YP 0x53
|
||||
#define AS5011_YN 0x54
|
||||
#define AS5011_X_REG 0x41
|
||||
#define AS5011_Y_REG 0x42
|
||||
#define AS5011_X_RES_INT 0x51
|
||||
#define AS5011_Y_RES_INT 0x52
|
||||
|
||||
/* CTRL1 bits */
|
||||
#define AS5011_CTRL1_LP_PULSED 0x80
|
||||
#define AS5011_CTRL1_LP_ACTIVE 0x40
|
||||
#define AS5011_CTRL1_LP_CONTINUE 0x20
|
||||
#define AS5011_CTRL1_INT_WUP_EN 0x10
|
||||
#define AS5011_CTRL1_INT_ACT_EN 0x08
|
||||
#define AS5011_CTRL1_EXT_CLK_EN 0x04
|
||||
#define AS5011_CTRL1_SOFT_RST 0x02
|
||||
#define AS5011_CTRL1_DATA_VALID 0x01
|
||||
|
||||
/* CTRL2 bits */
|
||||
#define AS5011_CTRL2_EXT_SAMPLE_EN 0x08
|
||||
#define AS5011_CTRL2_RC_BIAS_ON 0x04
|
||||
#define AS5011_CTRL2_INV_SPINNING 0x02
|
||||
|
||||
#define AS5011_MAX_AXIS 80
|
||||
#define AS5011_MIN_AXIS (-80)
|
||||
#define AS5011_FUZZ 8
|
||||
#define AS5011_FLAT 40
|
||||
|
||||
struct as5011_device {
|
||||
struct input_dev *input_dev;
|
||||
struct i2c_client *i2c_client;
|
||||
unsigned int button_gpio;
|
||||
unsigned int button_irq;
|
||||
unsigned int axis_irq;
|
||||
};
|
||||
|
||||
static int as5011_i2c_write(struct i2c_client *client,
|
||||
uint8_t aregaddr,
|
||||
uint8_t avalue)
|
||||
{
|
||||
uint8_t data[2] = { aregaddr, avalue };
|
||||
struct i2c_msg msg = {
|
||||
client->addr, I2C_M_IGNORE_NAK, 2, (uint8_t *)data
|
||||
};
|
||||
int error;
|
||||
|
||||
error = i2c_transfer(client->adapter, &msg, 1);
|
||||
return error < 0 ? error : 0;
|
||||
}
|
||||
|
||||
static int as5011_i2c_read(struct i2c_client *client,
|
||||
uint8_t aregaddr, signed char *value)
|
||||
{
|
||||
uint8_t data[2] = { aregaddr };
|
||||
struct i2c_msg msg_set[2] = {
|
||||
{ client->addr, I2C_M_REV_DIR_ADDR, 1, (uint8_t *)data },
|
||||
{ client->addr, I2C_M_RD | I2C_M_NOSTART, 1, (uint8_t *)data }
|
||||
};
|
||||
int error;
|
||||
|
||||
error = i2c_transfer(client->adapter, msg_set, 2);
|
||||
if (error < 0)
|
||||
return error;
|
||||
|
||||
*value = data[0] & 0x80 ? -1 * (1 + ~data[0]) : data[0];
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t as5011_button_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct as5011_device *as5011 = dev_id;
|
||||
int val = gpio_get_value_cansleep(as5011->button_gpio);
|
||||
|
||||
input_report_key(as5011->input_dev, BTN_JOYSTICK, !val);
|
||||
input_sync(as5011->input_dev);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t as5011_axis_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct as5011_device *as5011 = dev_id;
|
||||
int error;
|
||||
signed char x, y;
|
||||
|
||||
error = as5011_i2c_read(as5011->i2c_client, AS5011_X_RES_INT, &x);
|
||||
if (error < 0)
|
||||
goto out;
|
||||
|
||||
error = as5011_i2c_read(as5011->i2c_client, AS5011_Y_RES_INT, &y);
|
||||
if (error < 0)
|
||||
goto out;
|
||||
|
||||
input_report_abs(as5011->input_dev, ABS_X, x);
|
||||
input_report_abs(as5011->input_dev, ABS_Y, y);
|
||||
input_sync(as5011->input_dev);
|
||||
|
||||
out:
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int __devinit as5011_configure_chip(struct as5011_device *as5011,
|
||||
const struct as5011_platform_data *plat_dat)
|
||||
{
|
||||
struct i2c_client *client = as5011->i2c_client;
|
||||
int error;
|
||||
signed char value;
|
||||
|
||||
/* chip soft reset */
|
||||
error = as5011_i2c_write(client, AS5011_CTRL1,
|
||||
AS5011_CTRL1_SOFT_RST);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Soft reset failed\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
mdelay(10);
|
||||
|
||||
error = as5011_i2c_write(client, AS5011_CTRL1,
|
||||
AS5011_CTRL1_LP_PULSED |
|
||||
AS5011_CTRL1_LP_ACTIVE |
|
||||
AS5011_CTRL1_INT_ACT_EN);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Power config failed\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = as5011_i2c_write(client, AS5011_CTRL2,
|
||||
AS5011_CTRL2_INV_SPINNING);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Can't invert spinning\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
/* write threshold */
|
||||
error = as5011_i2c_write(client, AS5011_XP, plat_dat->xp);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Can't write threshold\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = as5011_i2c_write(client, AS5011_XN, plat_dat->xn);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Can't write threshold\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = as5011_i2c_write(client, AS5011_YP, plat_dat->yp);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Can't write threshold\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = as5011_i2c_write(client, AS5011_YN, plat_dat->yn);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Can't write threshold\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
/* to free irq gpio in chip */
|
||||
error = as5011_i2c_read(client, AS5011_X_RES_INT, &value);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Can't read i2c X resolution value\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit as5011_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
const struct as5011_platform_data *plat_data;
|
||||
struct as5011_device *as5011;
|
||||
struct input_dev *input_dev;
|
||||
int irq;
|
||||
int error;
|
||||
|
||||
plat_data = client->dev.platform_data;
|
||||
if (!plat_data)
|
||||
return -EINVAL;
|
||||
|
||||
if (!plat_data->axis_irq) {
|
||||
dev_err(&client->dev, "No axis IRQ?\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_PROTOCOL_MANGLING)) {
|
||||
dev_err(&client->dev,
|
||||
"need i2c bus that supports protocol mangling\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
as5011 = kmalloc(sizeof(struct as5011_device), GFP_KERNEL);
|
||||
input_dev = input_allocate_device();
|
||||
if (!as5011 || !input_dev) {
|
||||
dev_err(&client->dev,
|
||||
"Can't allocate memory for device structure\n");
|
||||
error = -ENOMEM;
|
||||
goto err_free_mem;
|
||||
}
|
||||
|
||||
as5011->i2c_client = client;
|
||||
as5011->input_dev = input_dev;
|
||||
as5011->button_gpio = plat_data->button_gpio;
|
||||
as5011->axis_irq = plat_data->axis_irq;
|
||||
|
||||
input_dev->name = "Austria Microsystem as5011 joystick";
|
||||
input_dev->id.bustype = BUS_I2C;
|
||||
input_dev->dev.parent = &client->dev;
|
||||
|
||||
__set_bit(EV_KEY, input_dev->evbit);
|
||||
__set_bit(EV_ABS, input_dev->evbit);
|
||||
__set_bit(BTN_JOYSTICK, input_dev->keybit);
|
||||
|
||||
input_set_abs_params(input_dev, ABS_X,
|
||||
AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
|
||||
input_set_abs_params(as5011->input_dev, ABS_Y,
|
||||
AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
|
||||
|
||||
error = gpio_request(as5011->button_gpio, "AS5011 button");
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev, "Failed to request button gpio\n");
|
||||
goto err_free_mem;
|
||||
}
|
||||
|
||||
irq = gpio_to_irq(as5011->button_gpio);
|
||||
if (irq < 0) {
|
||||
dev_err(&client->dev,
|
||||
"Failed to get irq number for button gpio\n");
|
||||
goto err_free_button_gpio;
|
||||
}
|
||||
|
||||
as5011->button_irq = irq;
|
||||
|
||||
error = request_threaded_irq(as5011->button_irq,
|
||||
NULL, as5011_button_interrupt,
|
||||
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
||||
"as5011_button", as5011);
|
||||
if (error < 0) {
|
||||
dev_err(&client->dev,
|
||||
"Can't allocate button irq %d\n", as5011->button_irq);
|
||||
goto err_free_button_gpio;
|
||||
}
|
||||
|
||||
error = as5011_configure_chip(as5011, plat_data);
|
||||
if (error)
|
||||
goto err_free_button_irq;
|
||||
|
||||
error = request_threaded_irq(as5011->axis_irq, NULL,
|
||||
as5011_axis_interrupt,
|
||||
plat_data->axis_irqflags,
|
||||
"as5011_joystick", as5011);
|
||||
if (error) {
|
||||
dev_err(&client->dev,
|
||||
"Can't allocate axis irq %d\n", plat_data->axis_irq);
|
||||
goto err_free_button_irq;
|
||||
}
|
||||
|
||||
error = input_register_device(as5011->input_dev);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "Failed to register input device\n");
|
||||
goto err_free_axis_irq;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, as5011);
|
||||
|
||||
return 0;
|
||||
|
||||
err_free_axis_irq:
|
||||
free_irq(as5011->axis_irq, as5011);
|
||||
err_free_button_irq:
|
||||
free_irq(as5011->button_irq, as5011);
|
||||
err_free_button_gpio:
|
||||
gpio_free(as5011->button_gpio);
|
||||
err_free_mem:
|
||||
input_free_device(input_dev);
|
||||
kfree(as5011);
|
||||
|
||||
return error;
|
||||
}
|
||||
|
||||
static int __devexit as5011_remove(struct i2c_client *client)
|
||||
{
|
||||
struct as5011_device *as5011 = i2c_get_clientdata(client);
|
||||
|
||||
free_irq(as5011->axis_irq, as5011);
|
||||
free_irq(as5011->button_irq, as5011);
|
||||
gpio_free(as5011->button_gpio);
|
||||
|
||||
input_unregister_device(as5011->input_dev);
|
||||
kfree(as5011);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id as5011_id[] = {
|
||||
{ MODULE_DEVICE_ALIAS, 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, as5011_id);
|
||||
|
||||
static struct i2c_driver as5011_driver = {
|
||||
.driver = {
|
||||
.name = "as5011",
|
||||
},
|
||||
.probe = as5011_probe,
|
||||
.remove = __devexit_p(as5011_remove),
|
||||
.id_table = as5011_id,
|
||||
};
|
||||
|
||||
static int __init as5011_init(void)
|
||||
{
|
||||
return i2c_add_driver(&as5011_driver);
|
||||
}
|
||||
module_init(as5011_init);
|
||||
|
||||
static void __exit as5011_exit(void)
|
||||
{
|
||||
i2c_del_driver(&as5011_driver);
|
||||
}
|
||||
module_exit(as5011_exit);
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
#ifndef _AS5011_H
|
||||
#define _AS5011_H
|
||||
|
||||
/*
|
||||
* Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
|
||||
struct as5011_platform_data {
|
||||
unsigned int button_gpio;
|
||||
unsigned int axis_irq; /* irq number */
|
||||
unsigned long axis_irqflags;
|
||||
char xp, xn; /* threshold for x axis */
|
||||
char yp, yn; /* threshold for y axis */
|
||||
};
|
||||
|
||||
#endif /* _AS5011_H */
|
||||
Loading…
Reference in New Issue