diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c index 56b878f8d49a..00d46ab185a1 100644 --- a/drivers/staging/tm6000/tm6000-cards.c +++ b/drivers/staging/tm6000/tm6000-cards.c @@ -299,7 +299,7 @@ struct tm6000_board tm6000_boards[] = { }; /* table of devices that work with this driver */ -struct usb_device_id tm6000_id_table [] = { +struct usb_device_id tm6000_id_table[] = { { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_10MOONS_UT821 }, { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC }, { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV }, @@ -324,23 +324,23 @@ struct usb_device_id tm6000_id_table [] = { int tm6000_tuner_callback(void *ptr, int component, int command, int arg) { - int rc=0; + int rc = 0; struct tm6000_core *dev = ptr; - if (dev->tuner_type!=TUNER_XC2028) + if (dev->tuner_type != TUNER_XC2028) return 0; switch (command) { case XC2028_RESET_CLK: - tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x02, arg); msleep(10); - rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0); - if (rc<0) + if (rc < 0) return rc; msleep(10); - rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1); break; case XC2028_TUNER_RESET: @@ -389,24 +389,24 @@ int tm6000_tuner_callback(void *ptr, int component, int command, int arg) } break; case 1: - tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x01); msleep(10); break; case 2: - rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0); - if (rc<0) + if (rc < 0) return rc; msleep(100); - rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1); msleep(100); break; } } - return (rc); + return rc; } int tm6000_cards_setup(struct tm6000_core *dev) @@ -507,28 +507,28 @@ int tm6000_cards_setup(struct tm6000_core *dev) return 0; }; -static void tm6000_config_tuner (struct tm6000_core *dev) +static void tm6000_config_tuner(struct tm6000_core *dev) { - struct tuner_setup tun_setup; + struct tuner_setup tun_setup; /* Load tuner module */ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tuner", "tuner",dev->tuner_addr, NULL); + "tuner", "tuner", dev->tuner_addr, NULL); memset(&tun_setup, 0, sizeof(tun_setup)); - tun_setup.type = dev->tuner_type; - tun_setup.addr = dev->tuner_addr; + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; tun_setup.mode_mask = T_ANALOG_TV | T_RADIO | T_DIGITAL_TV; tun_setup.tuner_callback = tm6000_tuner_callback; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); if (dev->tuner_type == TUNER_XC2028) { - struct v4l2_priv_tun_config xc2028_cfg; - struct xc2028_ctrl ctl; + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); - memset (&ctl,0,sizeof(ctl)); + memset(&ctl, 0, sizeof(ctl)); ctl.input1 = 1; ctl.read_not_reliable = 0; @@ -539,7 +539,7 @@ static void tm6000_config_tuner (struct tm6000_core *dev) xc2028_cfg.tuner = TUNER_XC2028; xc2028_cfg.priv = &ctl; - switch(dev->model) { + switch (dev->model) { case TM6010_BOARD_HAUPPAUGE_900H: case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: @@ -580,8 +580,8 @@ static int tm6000_init_dev(struct tm6000_core *dev) dev->caps = tm6000_boards[dev->model].caps; /* initialize hardware */ - rc=tm6000_init (dev); - if (rc<0) + rc = tm6000_init(dev); + if (rc < 0) goto err; rc = v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev); @@ -589,8 +589,8 @@ static int tm6000_init_dev(struct tm6000_core *dev) goto err; /* register i2c bus */ - rc=tm6000_i2c_register(dev); - if (rc<0) + rc = tm6000_i2c_register(dev); + if (rc < 0) goto err; /* Default values for STD and resolutions */ @@ -599,7 +599,7 @@ static int tm6000_init_dev(struct tm6000_core *dev) dev->norm = V4L2_STD_PAL_M; /* Configure tuner */ - tm6000_config_tuner (dev); + tm6000_config_tuner(dev); /* Set video standard */ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm); @@ -616,20 +616,20 @@ static int tm6000_init_dev(struct tm6000_core *dev) "tvaudio", "tvaudio", I2C_ADDR_TDA9874, NULL); /* register and initialize V4L2 */ - rc=tm6000_v4l2_register(dev); - if (rc<0) + rc = tm6000_v4l2_register(dev); + if (rc < 0) goto err; - if(dev->caps.has_dvb) { + if (dev->caps.has_dvb) { dev->dvb = kzalloc(sizeof(*(dev->dvb)), GFP_KERNEL); - if(!dev->dvb) { + if (!dev->dvb) { rc = -ENOMEM; goto err2; } #ifdef CONFIG_VIDEO_TM6000_DVB rc = tm6000_dvb_register(dev); - if(rc < 0) { + if (rc < 0) { kfree(dev->dvb); dev->dvb = NULL; goto err2; @@ -668,7 +668,7 @@ static void get_max_endpoint(struct usb_device *udev, tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber; tm_ep->bAlternateSetting = alt->desc.bAlternateSetting; - printk("tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", + printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", msgtype, curr_e->desc.bEndpointAddress, size); } @@ -683,22 +683,21 @@ static int tm6000_usb_probe(struct usb_interface *interface, { struct usb_device *usbdev; struct tm6000_core *dev = NULL; - int i,rc=0; - int nr=0; + int i, rc = 0; + int nr = 0; char *speed; - - usbdev=usb_get_dev(interface_to_usbdev(interface)); + usbdev = usb_get_dev(interface_to_usbdev(interface)); /* Selects the proper interface */ - rc=usb_set_interface(usbdev,0,1); - if (rc<0) + rc = usb_set_interface(usbdev, 0, 1); + if (rc < 0) goto err; /* Check to see next free device and mark as used */ - nr=find_first_zero_bit(&tm6000_devused,TM6000_MAXBOARDS); + nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS); if (nr >= TM6000_MAXBOARDS) { - printk ("tm6000: Supports only %i tm60xx boards.\n",TM6000_MAXBOARDS); + printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS); usb_put_dev(usbdev); return -ENOMEM; } @@ -706,24 +705,23 @@ static int tm6000_usb_probe(struct usb_interface *interface, /* Create and initialize dev struct */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - printk ("tm6000" ": out of memory!\n"); + printk(KERN_ERR "tm6000" ": out of memory!\n"); usb_put_dev(usbdev); return -ENOMEM; } spin_lock_init(&dev->slock); /* Increment usage count */ - tm6000_devused|=1<name, 29, "tm6000 #%d", nr); - dev->model=id->driver_info; - if ((card[nr]>=0) && (card[nr]model=card[nr]; - } + dev->model = id->driver_info; + if ((card[nr] >= 0) && (card[nr] < ARRAY_SIZE(tm6000_boards))) + dev->model = card[nr]; INIT_LIST_HEAD(&dev->tm6000_corelist); - dev->udev= usbdev; - dev->devno=nr; + dev->udev = usbdev; + dev->devno = nr; switch (usbdev->speed) { case USB_SPEED_LOW: @@ -755,7 +753,7 @@ static int tm6000_usb_probe(struct usb_interface *interface, dir_out = ((e->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); - printk("tm6000: alt %d, interface %i, class %i\n", + printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n", i, interface->altsetting[i].desc.bInterfaceNumber, interface->altsetting[i].desc.bInterfaceClass); @@ -792,7 +790,7 @@ static int tm6000_usb_probe(struct usb_interface *interface, } - printk("tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", + printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", speed, le16_to_cpu(dev->udev->descriptor.idVendor), le16_to_cpu(dev->udev->descriptor.idProduct), @@ -800,8 +798,8 @@ static int tm6000_usb_probe(struct usb_interface *interface, /* check if the the device has the iso in endpoint at the correct place */ if (!dev->isoc_in.endp) { - printk("tm6000: probing error: no IN ISOC endpoint!\n"); - rc= -ENODEV; + printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); + rc = -ENODEV; goto err; } @@ -809,19 +807,19 @@ static int tm6000_usb_probe(struct usb_interface *interface, /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); - printk("tm6000: Found %s\n", tm6000_boards[dev->model].name); + printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name); - rc=tm6000_init_dev(dev); + rc = tm6000_init_dev(dev); - if (rc<0) + if (rc < 0) goto err; return 0; err: - printk("tm6000: Error %d while registering\n", rc); + printk(KERN_ERR "tm6000: Error %d while registering\n", rc); - tm6000_devused&=~(1<name); + printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name); mutex_lock(&dev->lock); #ifdef CONFIG_VIDEO_TM6000_DVB - if(dev->dvb) { + if (dev->dvb) { tm6000_dvb_unregister(dev); kfree(dev->dvb); } @@ -858,8 +856,6 @@ static void tm6000_usb_disconnect(struct usb_interface *interface) v4l2_device_unregister(&dev->v4l2_dev); -// wake_up_interruptible_all(&dev->open); - dev->state |= DEV_DISCONNECTED; usb_put_dev(dev->udev); @@ -886,7 +882,7 @@ static int __init tm6000_module_init(void) /* register this driver with the USB subsystem */ result = usb_register(&tm6000_usb_driver); if (result) - printk("tm6000" + printk(KERN_ERR "tm6000" " usb_register failed. Error number %d.\n", result); return result;