From 9dc500a3251c240c7f2ccd793304125d869824a5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 4 Apr 2017 17:48:24 -0700 Subject: [PATCH] Input: sentelic - convert documentation into ReST format This file has its own particular format that doesn't match any markup one. Manually change it to get something that would be readable using ReST markup language. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Dmitry Torokhov --- Documentation/input/sentelic.txt | 946 ++++++++++++++++--------------- 1 file changed, 487 insertions(+), 459 deletions(-) diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt index 89251e2a3eba..d1a476f973b1 100644 --- a/Documentation/input/sentelic.txt +++ b/Documentation/input/sentelic.txt @@ -1,411 +1,437 @@ -Copyright (C) 2002-2011 Sentelic Corporation. -Last update: Dec-07-2011 +.. include:: + +=============== +Sentelic Driver +=============== + + +:Copyright: |copy| 2002-2011 Sentelic Corporation. + +:Last update: Dec-07-2011 + +Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons) +========================================================================== -============================================================================== -* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons) -============================================================================== A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward page (5th button) -@1. Set sample rate to 200; -@2. Set sample rate to 200; -@3. Set sample rate to 80; -@4. Issuing the "Get device ID" command (0xF2) and waits for the response; -@5. FSP will respond 0x04. -Packet 1 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W| - |---------------| |---------------| |---------------| |---------------| +1. Set sample rate to 200; +2. Set sample rate to 200; +3. Set sample rate to 80; +4. Issuing the "Get device ID" command (0xF2) and waits for the response; +5. FSP will respond 0x04. -Byte 1: Bit7 => Y overflow - Bit6 => X overflow - Bit5 => Y sign bit - Bit4 => X sign bit - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X Movement(9-bit 2's complement integers) -Byte 3: Y Movement(9-bit 2's complement integers) -Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report. - valid values, -8 ~ +7 - Bit4 => 1 = 4th mouse button is pressed, Forward one page. - 0 = 4th mouse button is not pressed. - Bit5 => 1 = 5th mouse button is pressed, Backward one page. - 0 = 5th mouse button is not pressed. +:: -B) MSID 6: Horizontal and Vertical scrolling. -@ Set bit 1 in register 0x40 to 1 + Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W| + |---------------| |---------------| |---------------| |---------------| -# FSP replaces scrolling wheel's movement as 4 bits to show horizontal and - vertical scrolling. + Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X Movement(9-bit 2's complement integers) + Byte 3: Y Movement(9-bit 2's complement integers) + Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report. + valid values, -8 ~ +7 + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. -Packet 1 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d| - |---------------| |---------------| |---------------| |---------------| +B) MSID 6: Horizontal and Vertical scrolling -Byte 1: Bit7 => Y overflow - Bit6 => X overflow - Bit5 => Y sign bit - Bit4 => X sign bit - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X Movement(9-bit 2's complement integers) -Byte 3: Y Movement(9-bit 2's complement integers) -Byte 4: Bit0 => the Vertical scrolling movement downward. - Bit1 => the Vertical scrolling movement upward. - Bit2 => the Horizontal scrolling movement leftward. - Bit3 => the Horizontal scrolling movement rightward. - Bit4 => 1 = 4th mouse button is pressed, Forward one page. - 0 = 4th mouse button is not pressed. - Bit5 => 1 = 5th mouse button is pressed, Backward one page. - 0 = 5th mouse button is not pressed. +- Set bit 1 in register 0x40 to 1 + +FSP replaces scrolling wheel's movement as 4 bits to show horizontal and +vertical scrolling. + +:: + + Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X Movement(9-bit 2's complement integers) + Byte 3: Y Movement(9-bit 2's complement integers) + Byte 4: Bit0 => the Vertical scrolling movement downward. + Bit1 => the Vertical scrolling movement upward. + Bit2 => the Horizontal scrolling movement leftward. + Bit3 => the Horizontal scrolling movement rightward. + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. + +C) MSID 7 + +FSP uses 2 packets (8 Bytes) to represent Absolute Position. +so we have PACKET NUMBER to identify packets. -C) MSID 7: -# FSP uses 2 packets (8 Bytes) to represent Absolute Position. - so we have PACKET NUMBER to identify packets. If PACKET NUMBER is 0, the packet is Packet 1. If PACKET NUMBER is 1, the packet is Packet 2. Please count this number in program. -# MSID6 special packet will be enable at the same time when enable MSID 7. +MSID6 special packet will be enable at the same time when enable MSID 7. -============================================================================== -* Absolute position for STL3886-G0. -============================================================================== -@ Set bit 2 or 3 in register 0x40 to 1 -@ Set bit 6 in register 0x40 to 1 +Absolute position for STL3886-G0 +================================ -Packet 1 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| +1. Set bit 2 or 3 in register 0x40 to 1 +2. Set bit 6 in register 0x40 to 1 -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - Bit5 => valid bit - Bit4 => 1 - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => scroll up - Bit5 => scroll down - Bit6 => scroll left - Bit7 => scroll right +:: -Notify Packet for G0 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| + Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - Bit5 => 0 - Bit4 => 1 - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message Type => 0x5A (Enable/Disable status packet) - Mode Type => 0xA5 (Normal/Icon mode status) -Byte 3: Message Type => 0x00 (Disabled) - => 0x01 (Enabled) - Mode Type => 0x00 (Normal) - => 0x01 (Icon) -Byte 4: Bit7~Bit0 => Don't Care + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => valid bit + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll up + Bit5 => scroll down + Bit6 => scroll left + Bit7 => scroll right -============================================================================== -* Absolute position for STL3888-Ax. -============================================================================== -Packet 1 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| + Notify Packet for G0 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => arc - Bit3 => 1 - Bit2 => Left Button, 1 is pressed, 0 is released. - Bit1 => 0 - Bit0 => 1 -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit5~Bit4 => y1_g - Bit7~Bit6 => x1_g + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => 0 + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message Type => 0x5A (Enable/Disable status packet) + Mode Type => 0xA5 (Normal/Icon mode status) + Byte 3: Message Type => 0x00 (Disabled) + => 0x01 (Enabled) + Mode Type => 0x00 (Normal) + => 0x01 (Icon) + Byte 4: Bit7~Bit0 => Don't Care -Packet 2 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| +Absolute position for STL3888-Ax +================================ -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => arc - Bit3 => 1 - Bit2 => Right Button, 1 is pressed, 0 is released. - Bit1 => 1 - Bit0 => 0 -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit5~Bit4 => y2_g - Bit7~Bit6 => x2_g +:: -Notify Packet for STL3888-Ax - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| + Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => 1 - Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): - 0: left button is generated by the on-pad command - 1: left button is generated by the external button - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) -Byte 3: Bit7~Bit6 => Don't care - Bit5~Bit4 => Number of fingers - Bit3~Bit1 => Reserved - Bit0 => 1: enter gesture mode; 0: leaving gesture mode -Byte 4: Bit7 => scroll right button - Bit6 => scroll left button - Bit5 => scroll down button - Bit4 => scroll up button - * Note that if gesture and additional button (Bit4~Bit7) - happen at the same time, the button information will not - be sent. - Bit3~Bit0 => Reserved + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Left Button, 1 is pressed, 0 is released. + Bit1 => 0 + Bit0 => 1 + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y1_g + Bit7~Bit6 => x1_g + + Packet 2 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Right Button, 1 is pressed, 0 is released. + Bit1 => 1 + Bit0 => 0 + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y2_g + Bit7~Bit6 => x2_g + + Notify Packet for STL3888-Ax + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => 1 + Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): + 0: left button is generated by the on-pad command + 1: left button is generated by the external button + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) + Byte 3: Bit7~Bit6 => Don't care + Bit5~Bit4 => Number of fingers + Bit3~Bit1 => Reserved + Bit0 => 1: enter gesture mode; 0: leaving gesture mode + Byte 4: Bit7 => scroll right button + Bit6 => scroll left button + Bit5 => scroll down button + Bit4 => scroll up button + * Note that if gesture and additional button (Bit4~Bit7) + happen at the same time, the button information will not + be sent. + Bit3~Bit0 => Reserved Sample sequence of Multi-finger, Multi-coordinate mode: notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, abs pkt 2, ..., notify packet (valid bit == 0) -============================================================================== -* Absolute position for STL3888-B0. -============================================================================== -Packet 1(ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| +Absolute position for STL3888-B0 +================================ -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => finger up/down information. 1: finger down, 0: finger up. - Bit3 => 1 - Bit2 => finger index, 0 is the first finger, 1 is the second finger. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => scroll down button - Bit5 => scroll up button - Bit6 => scroll left button - Bit7 => scroll right button +:: -Packet 2 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| + Packet 1(ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => finger up/down information. 1: finger down, 0: finger up. - Bit3 => 1 - Bit2 => finger index, 0 is the first finger, 1 is the second finger. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => scroll down button - Bit5 => scroll up button - Bit6 => scroll left button - Bit7 => scroll right button + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => finger up/down information. 1: finger down, 0: finger up. + Bit3 => 1 + Bit2 => finger index, 0 is the first finger, 1 is the second finger. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll down button + Bit5 => scroll up button + Bit6 => scroll left button + Bit7 => scroll right button -Notify Packet for STL3888-B0 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| + Packet 2 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => 1 - Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): - 0: left button is generated by the on-pad command - 1: left button is generated by the external button - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) -Byte 3: Bit7~Bit6 => Don't care - Bit5~Bit4 => Number of fingers - Bit3~Bit1 => Reserved - Bit0 => 1: enter gesture mode; 0: leaving gesture mode -Byte 4: Bit7 => scroll right button - Bit6 => scroll left button - Bit5 => scroll up button - Bit4 => scroll down button - * Note that if gesture and additional button(Bit4~Bit7) - happen at the same time, the button information will not - be sent. - Bit3~Bit0 => Reserved + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => finger up/down information. 1: finger down, 0: finger up. + Bit3 => 1 + Bit2 => finger index, 0 is the first finger, 1 is the second finger. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll down button + Bit5 => scroll up button + Bit6 => scroll left button + Bit7 => scroll right button + +Notify Packet for STL3888-B0:: + + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => 1 + Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): + 0: left button is generated by the on-pad command + 1: left button is generated by the external button + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) + Byte 3: Bit7~Bit6 => Don't care + Bit5~Bit4 => Number of fingers + Bit3~Bit1 => Reserved + Bit0 => 1: enter gesture mode; 0: leaving gesture mode + Byte 4: Bit7 => scroll right button + Bit6 => scroll left button + Bit5 => scroll up button + Bit4 => scroll down button + * Note that if gesture and additional button(Bit4~Bit7) + happen at the same time, the button information will not + be sent. + Bit3~Bit0 => Reserved Sample sequence of Multi-finger, Multi-coordinate mode: notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, abs pkt 2, ..., notify packet (valid bit == 0) -============================================================================== -* Absolute position for STL3888-Cx and STL3888-Dx. -============================================================================== -Single Finger, Absolute Coordinate Mode (SFAC) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| +Absolute position for STL3888-Cx and STL3888-Dx +=============================================== -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - Bit5 => Coordinate mode(always 0 in SFAC mode): - 0: single-finger absolute coordinates (SFAC) mode - 1: multi-finger, multiple coordinates (MFMC) mode - Bit4 => 0: The LEFT button is generated by on-pad command (OPC) - 1: The LEFT button is generated by external button - Default is 1 even if the LEFT button is not pressed. - Bit3 => Always 1, as specified by PS/2 protocol. - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => 4th mouse button(forward one page) - Bit5 => 5th mouse button(backward one page) - Bit6 => scroll left button - Bit7 => scroll right button +:: -Multi Finger, Multiple Coordinates Mode (MFMC): - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| + Single Finger, Absolute Coordinate Mode (SFAC) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - Bit5 => Coordinate mode (always 1 in MFMC mode): - 0: single-finger absolute coordinates (SFAC) mode - 1: multi-finger, multiple coordinates (MFMC) mode - Bit4 => 0: The LEFT button is generated by on-pad command (OPC) - 1: The LEFT button is generated by external button - Default is 1 even if the LEFT button is not pressed. - Bit3 => Always 1, as specified by PS/2 protocol. - Bit2 => Finger index, 0 is the first finger, 1 is the second finger. - If bit 1 and 0 are all 1 and bit 4 is 0, the middle external - button is pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => 4th mouse button(forward one page) - Bit5 => 5th mouse button(backward one page) - Bit6 => scroll left button - Bit7 => scroll right button + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Coordinate mode(always 0 in SFAC mode): + 0: single-finger absolute coordinates (SFAC) mode + 1: multi-finger, multiple coordinates (MFMC) mode + Bit4 => 0: The LEFT button is generated by on-pad command (OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => Always 1, as specified by PS/2 protocol. + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => 4th mouse button(forward one page) + Bit5 => 5th mouse button(backward one page) + Bit6 => scroll left button + Bit7 => scroll right button - When one of the two fingers is up, the device will output four consecutive + Multi Finger, Multiple Coordinates Mode (MFMC): + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => Coordinate mode (always 1 in MFMC mode): + 0: single-finger absolute coordinates (SFAC) mode + 1: multi-finger, multiple coordinates (MFMC) mode + Bit4 => 0: The LEFT button is generated by on-pad command (OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => Always 1, as specified by PS/2 protocol. + Bit2 => Finger index, 0 is the first finger, 1 is the second finger. + If bit 1 and 0 are all 1 and bit 4 is 0, the middle external + button is pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => 4th mouse button(forward one page) + Bit5 => 5th mouse button(backward one page) + Bit6 => scroll left button + Bit7 => scroll right button + +When one of the two fingers is up, the device will output four consecutive MFMC#0 report packets with zero X and Y to represent 1st finger is up or four consecutive MFMC#1 report packets with zero X and Y to represent that the 2nd finger is up. On the other hand, if both fingers are up, the device will output four consecutive single-finger, absolute coordinate(SFAC) packets with zero X and Y. -Notify Packet for STL3888-Cx/Dx - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| +Notify Packet for STL3888-Cx/Dx:: -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - Bit5 => Always 0 - Bit4 => 0: The LEFT button is generated by on-pad command(OPC) - 1: The LEFT button is generated by external button - Default is 1 even if the LEFT button is not pressed. - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message type: - 0xba => gesture information - 0xc0 => one finger hold-rotating gesture -Byte 3: The first parameter for the received message: - 0xba => gesture ID (refer to the 'Gesture ID' section) - 0xc0 => region ID -Byte 4: The second parameter for the received message: - 0xba => N/A - 0xc0 => finger up/down information + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Always 0 + Bit4 => 0: The LEFT button is generated by on-pad command(OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message type: + 0xba => gesture information + 0xc0 => one finger hold-rotating gesture + Byte 3: The first parameter for the received message: + 0xba => gesture ID (refer to the 'Gesture ID' section) + 0xc0 => region ID + Byte 4: The second parameter for the received message: + 0xba => N/A + 0xc0 => finger up/down information Sample sequence of Multi-finger, Multi-coordinates mode: @@ -416,50 +442,51 @@ Sample sequence of Multi-finger, Multi-coordinates mode: That is, when the device is in MFMC mode, the host will receive interleaved absolute coordinate packets for each finger. -============================================================================== -* FSP Enable/Disable packet -============================================================================== - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | | - |---------------| |---------------| |---------------| |---------------| +FSP Enable/Disable packet +========================= -FSP will send out enable/disable packet when FSP receive PS/2 enable/disable -command. Host will receive the packet which Middle, Right, Left button will -be set. The packet only use byte 0 and byte 1 as a pattern of original packet. -Ignore the other bytes of the packet. +:: -Byte 1: Bit7 => 0, Y overflow - Bit6 => 0, X overflow - Bit5 => 0, Y sign bit - Bit4 => 0, X sign bit - Bit3 => 1 - Bit2 => 1, Middle Button - Bit1 => 1, Right Button - Bit0 => 1, Left Button -Byte 2: Bit7~1 => (0101101b) - Bit0 => 1 = Enable - 0 = Disable -Byte 3: Don't care -Byte 4: Don't care (MOUSE ID 3, 4) -Byte 5~8: Don't care (Absolute packet) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | | + |---------------| |---------------| |---------------| |---------------| -============================================================================== -* PS/2 Command Set -============================================================================== + FSP will send out enable/disable packet when FSP receive PS/2 enable/disable + command. Host will receive the packet which Middle, Right, Left button will + be set. The packet only use byte 0 and byte 1 as a pattern of original packet. + Ignore the other bytes of the packet. + + Byte 1: Bit7 => 0, Y overflow + Bit6 => 0, X overflow + Bit5 => 0, Y sign bit + Bit4 => 0, X sign bit + Bit3 => 1 + Bit2 => 1, Middle Button + Bit1 => 1, Right Button + Bit0 => 1, Left Button + Byte 2: Bit7~1 => (0101101b) + Bit0 => 1 = Enable + 0 = Disable + Byte 3: Don't care + Byte 4: Don't care (MOUSE ID 3, 4) + Byte 5~8: Don't care (Absolute packet) + +PS/2 Command Set +================ FSP supports basic PS/2 commanding set and modes, refer to following URL for details about PS/2 commands: http://www.computer-engineering.org/ps2mouse/ -============================================================================== -* Programming Sequence for Determining Packet Parsing Flow -============================================================================== +Programming Sequence for Determining Packet Parsing Flow +======================================================== + 1. Identify FSP by reading device ID(0x00) and version(0x01) register -2a. For FSP version < STL3888 Cx, determine number of buttons by reading - the 'test mode status' (0x20) register: +2. For FSP version < STL3888 Cx, determine number of buttons by reading + the 'test mode status' (0x20) register:: buttons = reg[0x20] & 0x30 @@ -476,25 +503,24 @@ http://www.computer-engineering.org/ps2mouse/ Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' section A for packet parsing detail -2b. For FSP version >= STL3888 Cx: +3. For FSP version >= STL3888 Cx: Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' section A for packet parsing detail (ignore byte 4, bit ~ 7) -============================================================================== -* Programming Sequence for Register Reading/Writing -============================================================================== +Programming Sequence for Register Reading/Writing +================================================= Register inversion requirement: - Following values needed to be inverted(the '~' operator in C) before being -sent to FSP: +Following values needed to be inverted(the '~' operator in C) before being +sent to FSP:: 0xe8, 0xe9, 0xee, 0xf2, 0xf3 and 0xff. Register swapping requirement: - Following values needed to have their higher 4 bits and lower 4 bits being -swapped before being sent to FSP: +Following values needed to have their higher 4 bits and lower 4 bits being +swapped before being sent to FSP:: 10, 20, 40, 60, 80, 100 and 200. @@ -512,33 +538,33 @@ Register reading sequence: inverted(refer to the 'Register inversion requirement' section), goto step 6 - 5a. send 0x68 PS/2 command to FSP; + a. send 0x68 PS/2 command to FSP; - 5b. send the inverted register address to FSP and goto step 8; + b. send the inverted register address to FSP and goto step 8; 6. if the register address being to read is not required to be swapped(refer to the 'Register swapping requirement' section), goto step 7 - 6a. send 0xcc PS/2 command to FSP; + a. send 0xcc PS/2 command to FSP; - 6b. send the swapped register address to FSP and goto step 8; + b. send the swapped register address to FSP and goto step 8; 7. send 0x66 PS/2 command to FSP; - 7a. send the original register address to FSP and goto step 8; + a. send the original register address to FSP and goto step 8; 8. send 0xe9(status request) PS/2 command to FSP; 9. the 4th byte of the response read from FSP should be the - requested register value(?? indicates don't care byte): + requested register value(?? indicates don't care byte):: host: 0xe9 3888: 0xfa (??) (??) (val) * Note that since the Cx release, the hardware will return 1's - complement of the register value at the 3rd byte of status request - result: + complement of the register value at the 3rd byte of status request + result:: host: 0xe9 3888: 0xfa (??) (~val) (val) @@ -551,21 +577,21 @@ Register writing sequence: inverted(refer to the 'Register inversion requirement' section), goto step 3 - 2a. send 0x74 PS/2 command to FSP; + a. send 0x74 PS/2 command to FSP; - 2b. send the inverted register address to FSP and goto step 5; + b. send the inverted register address to FSP and goto step 5; 3. if the register address being to write is not required to be swapped(refer to the 'Register swapping requirement' section), goto step 4 - 3a. send 0x77 PS/2 command to FSP; + a. send 0x77 PS/2 command to FSP; - 3b. send the swapped register address to FSP and goto step 5; + b. send the swapped register address to FSP and goto step 5; 4. send 0x55 PS/2 command to FSP; - 4a. send the register address to FSP and goto step 5; + a. send the register address to FSP and goto step 5; 5. send 0xf3 PS/2 command to FSP; @@ -573,43 +599,42 @@ Register writing sequence: inverted(refer to the 'Register inversion requirement' section), goto step 7 - 6a. send 0x47 PS/2 command to FSP; + a. send 0x47 PS/2 command to FSP; - 6b. send the inverted register value to FSP and goto step 9; + b. send the inverted register value to FSP and goto step 9; 7. if the register value being to write is not required to be swapped(refer to the 'Register swapping requirement' section), goto step 8 - 7a. send 0x44 PS/2 command to FSP; + a. send 0x44 PS/2 command to FSP; - 7b. send the swapped register value to FSP and goto step 9; + b. send the swapped register value to FSP and goto step 9; 8. send 0x33 PS/2 command to FSP; - 8a. send the register value to FSP; + a. send the register value to FSP; 9. the register writing sequence is completed. - * Note that since the Cx release, the hardware will return 1's - complement of the register value at the 3rd byte of status request - result. Host can optionally send another 0xe9 (status request) PS/2 - command to FSP at the end of register writing to verify that the - register writing operation is successful (?? indicates don't care - byte): + * Since the Cx release, the hardware will return 1's + complement of the register value at the 3rd byte of status request + result. Host can optionally send another 0xe9 (status request) PS/2 + command to FSP at the end of register writing to verify that the + register writing operation is successful (?? indicates don't care + byte):: host: 0xe9 3888: 0xfa (??) (~val) (val) -============================================================================== -* Programming Sequence for Page Register Reading/Writing -============================================================================== +Programming Sequence for Page Register Reading/Writing +====================================================== - In order to overcome the limitation of maximum number of registers +In order to overcome the limitation of maximum number of registers supported, the hardware separates register into different groups called 'pages.' Each page is able to include up to 255 registers. - The default page after power up is 0x82; therefore, if one has to get +The default page after power up is 0x82; therefore, if one has to get access to register 0x8301, one has to use following sequence to switch to page 0x83, then start reading/writing from/to offset 0x01 by using the register read/write sequence described in previous section. @@ -632,6 +657,7 @@ Page register reading sequence: 8. the response read from FSP should be the requested page value. + Page register writing sequence: 1. send 0xf3 PS/2 command to FSP; @@ -646,17 +672,17 @@ Page register writing sequence: inverted(refer to the 'Register inversion requirement' section), goto step 6 - 5a. send 0x47 PS/2 command to FSP; + a. send 0x47 PS/2 command to FSP; - 5b. send the inverted page address to FSP and goto step 9; + b. send the inverted page address to FSP and goto step 9; 6. if the page address being written is not required to be swapped(refer to the 'Register swapping requirement' section), goto step 7 - 6a. send 0x44 PS/2 command to FSP; + a. send 0x44 PS/2 command to FSP; - 6b. send the swapped page address to FSP and goto step 9; + b. send the swapped page address to FSP and goto step 9; 7. send 0x33 PS/2 command to FSP; @@ -664,16 +690,17 @@ Page register writing sequence: 9. the page register writing sequence is completed. -============================================================================== -* Gesture ID -============================================================================== +Gesture ID +========== - Unlike other devices which sends multiple fingers' coordinates to host, +Unlike other devices which sends multiple fingers' coordinates to host, FSP processes multiple fingers' coordinates internally and convert them into a 8 bits integer, namely 'Gesture ID.' Following is a list of supported gesture IDs: + ======= ================================== ID Description + ======= ================================== 0x86 2 finger straight up 0x82 2 finger straight down 0x80 2 finger straight right @@ -687,38 +714,38 @@ supported gesture IDs: 0x28 3 finger straight right 0x2c 3 finger straight left 0x38 palm + ======= ================================== -============================================================================== -* Register Listing -============================================================================== +Register Listing +================ - Registers are represented in 16 bits values. The higher 8 bits represent +Registers are represented in 16 bits values. The higher 8 bits represent the page address and the lower 8 bits represent the relative offset within that particular page. Refer to the 'Programming Sequence for Page Register Reading/Writing' section for instructions on how to change current page -address. +address:: -offset width default r/w name -0x8200 bit7~bit0 0x01 RO device ID + offset width default r/w name + 0x8200 bit7~bit0 0x01 RO device ID -0x8201 bit7~bit0 RW version ID + 0x8201 bit7~bit0 RW version ID 0xc1: STL3888 Ax 0xd0 ~ 0xd2: STL3888 Bx 0xe0 ~ 0xe1: STL3888 Cx 0xe2 ~ 0xe3: STL3888 Dx -0x8202 bit7~bit0 0x01 RO vendor ID + 0x8202 bit7~bit0 0x01 RO vendor ID -0x8203 bit7~bit0 0x01 RO product ID + 0x8203 bit7~bit0 0x01 RO product ID -0x8204 bit3~bit0 0x01 RW revision ID + 0x8204 bit3~bit0 0x01 RW revision ID -0x820b test mode status 1 + 0x820b test mode status 1 bit3 1 RO 0: rotate 180 degree 1: no rotation *only supported by H/W prior to Cx -0x820f register file page control + 0x820f register file page control bit2 0 RW 1: rotate 180 degree 0: no rotation *supported since Cx @@ -726,7 +753,7 @@ offset width default r/w name bit0 0 RW 1 to enable page 1 register files *only supported by H/W prior to Cx -0x8210 RW system control 1 + 0x8210 RW system control 1 bit0 1 RW Reserved, must be 1 bit1 0 RW Reserved, must be 0 bit4 0 RW Reserved, must be 0 @@ -737,7 +764,7 @@ offset width default r/w name 40 41 42 43. In addition to that, this bit must be 1 when gesture mode is enabled) -0x8220 test mode status + 0x8220 test mode status bit5~bit4 RO number of buttons 11 => 2, lbtn/rbtn 10 => 4, lbtn/rbtn/scru/scrd @@ -745,13 +772,13 @@ offset width default r/w name 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn *only supported by H/W prior to Cx -0x8231 RW on-pad command detection + 0x8231 RW on-pad command detection bit7 0 RW on-pad command left button down tag enable 0: disable, 1: enable *only supported by H/W prior to Cx -0x8234 RW on-pad command control 5 + 0x8234 RW on-pad command control 5 bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5 (Note that position unit is in 0.5 scanline) *only supported by H/W prior to Cx @@ -760,22 +787,22 @@ offset width default r/w name 0: disable, 1: enable *only supported by H/W prior to Cx -0x8235 RW on-pad command control 6 + 0x8235 RW on-pad command control 6 bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5 (Note that position unit is in 0.5 scanline) *only supported by H/W prior to Cx -0x8236 RW on-pad command control 7 + 0x8236 RW on-pad command control 7 bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5 (Note that position unit is in 0.5 scanline) *only supported by H/W prior to Cx -0x8237 RW on-pad command control 8 + 0x8237 RW on-pad command control 8 bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5 (Note that position unit is in 0.5 scanline) *only supported by H/W prior to Cx -0x8240 RW system control 5 + 0x8240 RW system control 5 bit1 0 RW FSP Intellimouse mode enable 0: disable, 1: enable *only supported by H/W prior to Cx @@ -813,7 +840,7 @@ offset width default r/w name 0: disable, 1: enable *only supported by H/W prior to Cx -0x8243 RW on-pad control + 0x8243 RW on-pad control bit0 0 RW on-pad control enable 0: disable, 1: enable (Note that if this bit is cleared, bit 3/5 will be ineffective) @@ -827,7 +854,7 @@ offset width default r/w name 0: disable, 1: enable *only supported by H/W prior to Cx -0x8290 RW software control register 1 + 0x8290 RW software control register 1 bit0 0 RW absolute coordination mode 0: disable, 1: enable *supported since Cx @@ -856,16 +883,17 @@ offset width default r/w name *supported since Cx bit7 0 RW Bx packet output compatible mode - 0: disable, 1: enable *supported since Cx + 0: disable, 1: enable + *supported since Cx *supported since Cx -0x833d RW on-pad command control 1 + 0x833d RW on-pad command control 1 bit7 1 RW on-pad command detection enable 0: disable, 1: enable *supported since Cx -0x833e RW on-pad command detection + 0x833e RW on-pad command detection bit7 0 RW on-pad command left button down tag enable. Works only in H/W based PS/2 data packet mode.