regulator: max77693: Add support for MAX77843 device

The charger and safeout parts of MAX77843 are almost the same as MAX77693.
From regulator point of view the only differences are the constraints
and register values related to these constraints. Now the max77693
regulator driver can be used for MAX77843 device.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/Kconfig

@@ -407,13 +407,13 @@ config REGULATOR_MAX77686
 	  Exynos-4 chips to control VARM and VINT voltages.
 
 config REGULATOR_MAX77693
-	tristate "Maxim MAX77693 regulator"
+	tristate "Maxim 77693/77843 regulator"
-	depends on MFD_MAX77693
+	depends on (MFD_MAX77693 || MFD_MAX77843)
 	help
-	  This driver controls a Maxim 77693 regulator via I2C bus.
+	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
 	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
 	  and one current regulator 'CHARGER'. This is suitable for
-	  Exynos-4x12 chips.
+	  Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
 
 config REGULATOR_MAX77802
 	tristate "Maxim 77802 regulator"

drivers/regulator/max77693.c

@@ -1,8 +1,9 @@
 /*
- * max77693.c - Regulator driver for the Maxim 77693
+ * max77693.c - Regulator driver for the Maxim 77693 and 77843
  *
- * Copyright (C) 2013 Samsung Electronics
+ * Copyright (C) 2013-2015 Samsung Electronics
  * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -31,10 +32,23 @@
 #include <linux/mfd/max77693.h>
 #include <linux/mfd/max77693-common.h>
 #include <linux/mfd/max77693-private.h>
+#include <linux/mfd/max77843-private.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
 
-/* Charger regulator differences between MAX77693 and MAX77843 */
+/*
+ * ID for MAX77843 regulators.
+ * There is no need for such for MAX77693.
+ */
+enum max77843_regulator_type {
+	MAX77843_SAFEOUT1 = 0,
+	MAX77843_SAFEOUT2,
+	MAX77843_CHARGER,
+
+	MAX77843_NUM,
+};
+
+/* Register differences between chargers: MAX77693 and MAX77843 */
 struct chg_reg_data {
 	unsigned int linear_reg;
 	unsigned int linear_mask;
@@ -43,9 +57,14 @@ struct chg_reg_data {
 };
 
 /*
- * CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
+ * MAX77693 CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
  * 0x00, 0x01, 0x2, 0x03	= 60 mA
  * 0x04 ~ 0x7E			= (60 + (X - 3) * 20) mA
+ * Actually for MAX77693 the driver manipulates the maximum input current,
+ * not the fast charge current (output). This should be fixed.
+ *
+ * On MAX77843 the calculation formula is the same (except values).
+ * Fortunately it properly manipulates the fast charge current.
  */
 static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 {
@@ -95,6 +114,26 @@ static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
 }
 /* end of CHARGER regulator ops */
 
+/* Returns regmap suitable for given regulator on chosen device */
+static struct regmap *max77693_get_regmap(enum max77693_types type,
+					  struct max77693_dev *max77693,
+					  int reg_id)
+{
+	if (type == TYPE_MAX77693)
+		return max77693->regmap;
+
+	/* Else: TYPE_MAX77843 */
+	switch (reg_id) {
+	case MAX77843_SAFEOUT1:
+	case MAX77843_SAFEOUT2:
+		return max77693->regmap;
+	case MAX77843_CHARGER:
+		return max77693->regmap_chg;
+	default:
+		return max77693->regmap;
+	}
+}
+
 static const unsigned int max77693_safeout_table[] = {
 	4850000,
 	4900000,
@@ -119,7 +158,7 @@ static struct regulator_ops max77693_charger_ops = {
 	.set_current_limit	= max77693_chg_set_current_limit,
 };
 
-#define regulator_desc_esafeout(_num)	{			\
+#define max77693_regulator_desc_esafeout(_num)	{		\
 	.name		= "ESAFEOUT"#_num,			\
 	.id		= MAX77693_ESAFEOUT##_num,		\
 	.of_match	= of_match_ptr("ESAFEOUT"#_num),	\
@@ -135,9 +174,9 @@ static struct regulator_ops max77693_charger_ops = {
 	.enable_mask	= SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK ,	\
 }
 
-static const struct regulator_desc regulators[] = {
+static const struct regulator_desc max77693_supported_regulators[] = {
-	regulator_desc_esafeout(1),
+	max77693_regulator_desc_esafeout(1),
-	regulator_desc_esafeout(2),
+	max77693_regulator_desc_esafeout(2),
 	{
 		.name = "CHARGER",
 		.id = MAX77693_CHARGER,
@@ -160,19 +199,79 @@ static const struct chg_reg_data max77693_chg_reg_data = {
 	.min_sel	= 3,
 };
 
+#define	max77843_regulator_desc_esafeout(num)	{			\
+	.name		= "SAFEOUT" # num,				\
+	.id		= MAX77843_SAFEOUT ## num,			\
+	.ops		= &max77693_safeout_ops,			\
+	.of_match	= of_match_ptr("SAFEOUT" # num),		\
+	.regulators_node = of_match_ptr("regulators"),			\
+	.type		= REGULATOR_VOLTAGE,				\
+	.owner		= THIS_MODULE,					\
+	.n_voltages	= ARRAY_SIZE(max77693_safeout_table),		\
+	.volt_table	= max77693_safeout_table,			\
+	.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,			\
+	.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num,	\
+	.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,			\
+	.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
+}
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+	[MAX77843_SAFEOUT1] = max77843_regulator_desc_esafeout(1),
+	[MAX77843_SAFEOUT2] = max77843_regulator_desc_esafeout(2),
+	[MAX77843_CHARGER] = {
+		.name		= "CHARGER",
+		.id		= MAX77843_CHARGER,
+		.ops		= &max77693_charger_ops,
+		.of_match	= of_match_ptr("CHARGER"),
+		.regulators_node = of_match_ptr("regulators"),
+		.type		= REGULATOR_CURRENT,
+		.owner		= THIS_MODULE,
+		.enable_reg	= MAX77843_CHG_REG_CHG_CNFG_00,
+		.enable_mask	= MAX77843_CHG_MASK,
+		.enable_val	= MAX77843_CHG_MASK,
+	},
+};
+
+static const struct chg_reg_data max77843_chg_reg_data = {
+	.linear_reg	= MAX77843_CHG_REG_CHG_CNFG_02,
+	.linear_mask	= MAX77843_CHG_FAST_CHG_CURRENT_MASK,
+	.uA_step	= MAX77843_CHG_FAST_CHG_CURRENT_STEP,
+	.min_sel	= 2,
+};
+
 static int max77693_pmic_probe(struct platform_device *pdev)
 {
+	enum max77693_types type = platform_get_device_id(pdev)->driver_data;
 	struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *regulators;
+	unsigned int regulators_size;
 	int i;
 	struct regulator_config config = { };
 
 	config.dev = iodev->dev;
-	config.regmap = iodev->regmap;
-	config.driver_data = (void *)&max77693_chg_reg_data;
 
-	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+	switch (type) {
+	case TYPE_MAX77693:
+		regulators = max77693_supported_regulators;
+		regulators_size = ARRAY_SIZE(max77693_supported_regulators);
+		config.driver_data = (void *)&max77693_chg_reg_data;
+		break;
+	case TYPE_MAX77843:
+		regulators = max77843_supported_regulators;
+		regulators_size = ARRAY_SIZE(max77843_supported_regulators);
+		config.driver_data = (void *)&max77843_chg_reg_data;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported device type: %u\n", type);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < regulators_size; i++) {
 		struct regulator_dev *rdev;
 
+		config.regmap = max77693_get_regmap(type, iodev,
+						    regulators[i].id);
+
 		rdev = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
 		if (IS_ERR(rdev)) {
@@ -187,6 +286,7 @@ static int max77693_pmic_probe(struct platform_device *pdev)
 
 static const struct platform_device_id max77693_pmic_id[] = {
 	{ "max77693-pmic", TYPE_MAX77693 },
+	{ "max77843-regulator", TYPE_MAX77843 },
 	{},
 };
 
@@ -202,6 +302,7 @@ static struct platform_driver max77693_pmic_driver = {
 
 module_platform_driver(max77693_pmic_driver);
 
-MODULE_DESCRIPTION("MAXIM MAX77693 regulator driver");
+MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver");
 MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski.k@gmail.com>");
 MODULE_LICENSE("GPL");