mirror of https://gitee.com/openkylin/linux.git
i2c-voodoo3: Delete
Superseded by tdfxfb. I2C/DDC support used to live in a separate driver but this caused driver conflicts. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
This commit is contained in:
Jean Delvare
parent
bc6286e50b
commit
a0c11cdd6a
|
|
@ -419,15 +419,6 @@ Who: Alex Chiang <achiang@hp.com>
|
|||
|
||||
---------------------------
|
||||
|
||||
What: i2c-voodoo3 driver
|
||||
When: October 2009
|
||||
Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
|
||||
driver but this caused driver conflicts.
|
||||
Who: Jean Delvare <khali@linux-fr.org>
|
||||
Krzysztof Helt <krzysztof.h1@wp.pl>
|
||||
|
||||
---------------------------
|
||||
|
||||
What: CONFIG_RFKILL_INPUT
|
||||
When: 2.6.33
|
||||
Why: Should be implemented in userspace, policy daemon.
|
||||
|
|
|
|||
|
|
@ -1,62 +0,0 @@
|
|||
Kernel driver i2c-voodoo3
|
||||
|
||||
Supported adapters:
|
||||
* 3dfx Voodoo3 based cards
|
||||
* Voodoo Banshee based cards
|
||||
|
||||
Authors:
|
||||
Frodo Looijaard <frodol@dds.nl>,
|
||||
Philip Edelbrock <phil@netroedge.com>,
|
||||
Ralph Metzler <rjkm@thp.uni-koeln.de>,
|
||||
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
||||
|
||||
Main contact: Philip Edelbrock <phil@netroedge.com>
|
||||
|
||||
The code is based upon Ralph's test code (he did the hard stuff ;')
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
The 3dfx Voodoo3 chip contains two I2C interfaces (aka a I2C 'master' or
|
||||
'host').
|
||||
|
||||
The first interface is used for DDC (Data Display Channel) which is a
|
||||
serial channel through the VGA monitor connector to a DDC-compliant
|
||||
monitor. This interface is defined by the Video Electronics Standards
|
||||
Association (VESA). The standards are available for purchase at
|
||||
http://www.vesa.org .
|
||||
|
||||
The second interface is a general-purpose I2C bus. The intent by 3dfx was
|
||||
to allow manufacturers to add extra chips to the video card such as a
|
||||
TV-out chip such as the BT869 or possibly even I2C based temperature
|
||||
sensors like the ADM1021 or LM75.
|
||||
|
||||
Stability
|
||||
---------
|
||||
|
||||
Seems to be stable on the test machine, but needs more testing on other
|
||||
machines. Simultaneous accesses of the DDC and I2C busses may cause errors.
|
||||
|
||||
Supported Devices
|
||||
-----------------
|
||||
|
||||
Specifically, this driver was written and tested on the '3dfx Voodoo3 AGP
|
||||
3000' which has a tv-out feature (s-video or composite). According to the
|
||||
docs and discussions, this code should work for any Voodoo3 based cards as
|
||||
well as Voodoo Banshee based cards. The DDC interface has been tested on a
|
||||
Voodoo Banshee card.
|
||||
|
||||
Issues
|
||||
------
|
||||
|
||||
Probably many, but it seems to work OK on my system. :')
|
||||
|
||||
|
||||
External Device Connection
|
||||
--------------------------
|
||||
|
||||
The digital video input jumpers give availability to the I2C bus.
|
||||
Specifically, pins 13 and 25 (bottom row middle, and bottom right-end) are
|
||||
the I2C clock and I2C data lines, respectively. +5V and GND are probably
|
||||
also easily available making the addition of extra I2C/SMBus devices easy
|
||||
to implement.
|
||||
|
|
@ -640,22 +640,6 @@ config I2C_TINY_USB
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-tiny-usb.
|
||||
|
||||
comment "Graphics adapter I2C/DDC channel drivers"
|
||||
depends on PCI
|
||||
|
||||
config I2C_VOODOO3
|
||||
tristate "Voodoo 3 (DEPRECATED)"
|
||||
depends on PCI
|
||||
select I2C_ALGOBIT
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
Voodoo 3 I2C interface. This driver is deprecated and you should
|
||||
use the tdfxfb driver instead, which additionally provides
|
||||
framebuffer support.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-voodoo3.
|
||||
|
||||
comment "Other I2C/SMBus bus drivers"
|
||||
|
||||
config I2C_ACORN
|
||||
|
|
|
|||
|
|
@ -61,9 +61,6 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
|
|||
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
|
||||
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
|
||||
|
||||
# Graphics adapter I2C/DDC channel drivers
|
||||
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
|
||||
|
||||
# Other I2C/SMBus bus drivers
|
||||
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
|
||||
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
||||
|
|
|
|||
|
|
@ -1,248 +0,0 @@
|
|||
/*
|
||||
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
|
||||
Philip Edelbrock <phil@netroedge.com>,
|
||||
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
||||
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
||||
|
||||
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
||||
Simon Vogl
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program; if not, write to the Free Software
|
||||
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
/* This interfaces to the I2C bus of the Voodoo3 to gain access to
|
||||
the BT869 and possibly other I2C devices. */
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-algo-bit.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
/* the only registers we use */
|
||||
#define REG 0x78
|
||||
#define REG2 0x70
|
||||
|
||||
/* bit locations in the register */
|
||||
#define DDC_ENAB 0x00040000
|
||||
#define DDC_SCL_OUT 0x00080000
|
||||
#define DDC_SDA_OUT 0x00100000
|
||||
#define DDC_SCL_IN 0x00200000
|
||||
#define DDC_SDA_IN 0x00400000
|
||||
#define I2C_ENAB 0x00800000
|
||||
#define I2C_SCL_OUT 0x01000000
|
||||
#define I2C_SDA_OUT 0x02000000
|
||||
#define I2C_SCL_IN 0x04000000
|
||||
#define I2C_SDA_IN 0x08000000
|
||||
|
||||
/* initialization states */
|
||||
#define INIT2 0x2
|
||||
#define INIT3 0x4
|
||||
|
||||
/* delays */
|
||||
#define CYCLE_DELAY 10
|
||||
#define TIMEOUT (HZ / 2)
|
||||
|
||||
|
||||
static void __iomem *ioaddr;
|
||||
|
||||
/* The voo GPIO registers don't have individual masks for each bit
|
||||
so we always have to read before writing. */
|
||||
|
||||
static void bit_vooi2c_setscl(void *data, int val)
|
||||
{
|
||||
unsigned int r;
|
||||
r = readl(ioaddr + REG);
|
||||
if (val)
|
||||
r |= I2C_SCL_OUT;
|
||||
else
|
||||
r &= ~I2C_SCL_OUT;
|
||||
writel(r, ioaddr + REG);
|
||||
readl(ioaddr + REG); /* flush posted write */
|
||||
}
|
||||
|
||||
static void bit_vooi2c_setsda(void *data, int val)
|
||||
{
|
||||
unsigned int r;
|
||||
r = readl(ioaddr + REG);
|
||||
if (val)
|
||||
r |= I2C_SDA_OUT;
|
||||
else
|
||||
r &= ~I2C_SDA_OUT;
|
||||
writel(r, ioaddr + REG);
|
||||
readl(ioaddr + REG); /* flush posted write */
|
||||
}
|
||||
|
||||
/* The GPIO pins are open drain, so the pins always remain outputs.
|
||||
We rely on the i2c-algo-bit routines to set the pins high before
|
||||
reading the input from other chips. */
|
||||
|
||||
static int bit_vooi2c_getscl(void *data)
|
||||
{
|
||||
return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
|
||||
}
|
||||
|
||||
static int bit_vooi2c_getsda(void *data)
|
||||
{
|
||||
return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
|
||||
}
|
||||
|
||||
static void bit_vooddc_setscl(void *data, int val)
|
||||
{
|
||||
unsigned int r;
|
||||
r = readl(ioaddr + REG);
|
||||
if (val)
|
||||
r |= DDC_SCL_OUT;
|
||||
else
|
||||
r &= ~DDC_SCL_OUT;
|
||||
writel(r, ioaddr + REG);
|
||||
readl(ioaddr + REG); /* flush posted write */
|
||||
}
|
||||
|
||||
static void bit_vooddc_setsda(void *data, int val)
|
||||
{
|
||||
unsigned int r;
|
||||
r = readl(ioaddr + REG);
|
||||
if (val)
|
||||
r |= DDC_SDA_OUT;
|
||||
else
|
||||
r &= ~DDC_SDA_OUT;
|
||||
writel(r, ioaddr + REG);
|
||||
readl(ioaddr + REG); /* flush posted write */
|
||||
}
|
||||
|
||||
static int bit_vooddc_getscl(void *data)
|
||||
{
|
||||
return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
|
||||
}
|
||||
|
||||
static int bit_vooddc_getsda(void *data)
|
||||
{
|
||||
return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
|
||||
}
|
||||
|
||||
static int config_v3(struct pci_dev *dev)
|
||||
{
|
||||
unsigned long cadr;
|
||||
|
||||
/* map Voodoo3 memory */
|
||||
cadr = dev->resource[0].start;
|
||||
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
||||
ioaddr = ioremap_nocache(cadr, 0x1000);
|
||||
if (ioaddr) {
|
||||
writel(0x8160, ioaddr + REG2);
|
||||
writel(0xcffc0020, ioaddr + REG);
|
||||
dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
|
||||
return 0;
|
||||
}
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static struct i2c_algo_bit_data voo_i2c_bit_data = {
|
||||
.setsda = bit_vooi2c_setsda,
|
||||
.setscl = bit_vooi2c_setscl,
|
||||
.getsda = bit_vooi2c_getsda,
|
||||
.getscl = bit_vooi2c_getscl,
|
||||
.udelay = CYCLE_DELAY,
|
||||
.timeout = TIMEOUT
|
||||
};
|
||||
|
||||
static struct i2c_adapter voodoo3_i2c_adapter = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "I2C Voodoo3/Banshee adapter",
|
||||
.algo_data = &voo_i2c_bit_data,
|
||||
};
|
||||
|
||||
static struct i2c_algo_bit_data voo_ddc_bit_data = {
|
||||
.setsda = bit_vooddc_setsda,
|
||||
.setscl = bit_vooddc_setscl,
|
||||
.getsda = bit_vooddc_getsda,
|
||||
.getscl = bit_vooddc_getscl,
|
||||
.udelay = CYCLE_DELAY,
|
||||
.timeout = TIMEOUT
|
||||
};
|
||||
|
||||
static struct i2c_adapter voodoo3_ddc_adapter = {
|
||||
.owner = THIS_MODULE,
|
||||
.class = I2C_CLASS_DDC,
|
||||
.name = "DDC Voodoo3/Banshee adapter",
|
||||
.algo_data = &voo_ddc_bit_data,
|
||||
};
|
||||
|
||||
static struct pci_device_id voodoo3_ids[] __devinitdata = {
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
|
||||
{ 0, }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE (pci, voodoo3_ids);
|
||||
|
||||
static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = config_v3(dev);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
/* set up the sysfs linkage to our parent device */
|
||||
voodoo3_i2c_adapter.dev.parent = &dev->dev;
|
||||
voodoo3_ddc_adapter.dev.parent = &dev->dev;
|
||||
|
||||
retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
|
||||
if (retval)
|
||||
return retval;
|
||||
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
|
||||
if (retval)
|
||||
i2c_del_adapter(&voodoo3_i2c_adapter);
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void __devexit voodoo3_remove(struct pci_dev *dev)
|
||||
{
|
||||
i2c_del_adapter(&voodoo3_i2c_adapter);
|
||||
i2c_del_adapter(&voodoo3_ddc_adapter);
|
||||
iounmap(ioaddr);
|
||||
}
|
||||
|
||||
static struct pci_driver voodoo3_driver = {
|
||||
.name = "voodoo3_smbus",
|
||||
.id_table = voodoo3_ids,
|
||||
.probe = voodoo3_probe,
|
||||
.remove = __devexit_p(voodoo3_remove),
|
||||
};
|
||||
|
||||
static int __init i2c_voodoo3_init(void)
|
||||
{
|
||||
return pci_register_driver(&voodoo3_driver);
|
||||
}
|
||||
|
||||
static void __exit i2c_voodoo3_exit(void)
|
||||
{
|
||||
pci_unregister_driver(&voodoo3_driver);
|
||||
}
|
||||
|
||||
|
||||
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
||||
"Philip Edelbrock <phil@netroedge.com>, "
|
||||
"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
|
||||
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
||||
MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
module_init(i2c_voodoo3_init);
|
||||
module_exit(i2c_voodoo3_exit);
|
||||
Loading…
Reference in New Issue