mirror of https://gitee.com/openkylin/linux.git
i2c-voodoo3: Delete
Superseded by tdfxfb. I2C/DDC support used to live in a separate driver but this caused driver conflicts. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
This commit is contained in:
Jean Delvare
parent
bc6286e50b
commit
a0c11cdd6a
|
|
@ -419,15 +419,6 @@ Who: Alex Chiang <achiang@hp.com>
|
||||||
|
|
||||||
---------------------------
|
---------------------------
|
||||||
|
|
||||||
What: i2c-voodoo3 driver
|
|
||||||
When: October 2009
|
|
||||||
Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
|
|
||||||
driver but this caused driver conflicts.
|
|
||||||
Who: Jean Delvare <khali@linux-fr.org>
|
|
||||||
Krzysztof Helt <krzysztof.h1@wp.pl>
|
|
||||||
|
|
||||||
---------------------------
|
|
||||||
|
|
||||||
What: CONFIG_RFKILL_INPUT
|
What: CONFIG_RFKILL_INPUT
|
||||||
When: 2.6.33
|
When: 2.6.33
|
||||||
Why: Should be implemented in userspace, policy daemon.
|
Why: Should be implemented in userspace, policy daemon.
|
||||||
|
|
|
||||||
|
|
@ -1,62 +0,0 @@
|
||||||
Kernel driver i2c-voodoo3
|
|
||||||
|
|
||||||
Supported adapters:
|
|
||||||
* 3dfx Voodoo3 based cards
|
|
||||||
* Voodoo Banshee based cards
|
|
||||||
|
|
||||||
Authors:
|
|
||||||
Frodo Looijaard <frodol@dds.nl>,
|
|
||||||
Philip Edelbrock <phil@netroedge.com>,
|
|
||||||
Ralph Metzler <rjkm@thp.uni-koeln.de>,
|
|
||||||
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
||||||
|
|
||||||
Main contact: Philip Edelbrock <phil@netroedge.com>
|
|
||||||
|
|
||||||
The code is based upon Ralph's test code (he did the hard stuff ;')
|
|
||||||
|
|
||||||
Description
|
|
||||||
-----------
|
|
||||||
|
|
||||||
The 3dfx Voodoo3 chip contains two I2C interfaces (aka a I2C 'master' or
|
|
||||||
'host').
|
|
||||||
|
|
||||||
The first interface is used for DDC (Data Display Channel) which is a
|
|
||||||
serial channel through the VGA monitor connector to a DDC-compliant
|
|
||||||
monitor. This interface is defined by the Video Electronics Standards
|
|
||||||
Association (VESA). The standards are available for purchase at
|
|
||||||
http://www.vesa.org .
|
|
||||||
|
|
||||||
The second interface is a general-purpose I2C bus. The intent by 3dfx was
|
|
||||||
to allow manufacturers to add extra chips to the video card such as a
|
|
||||||
TV-out chip such as the BT869 or possibly even I2C based temperature
|
|
||||||
sensors like the ADM1021 or LM75.
|
|
||||||
|
|
||||||
Stability
|
|
||||||
---------
|
|
||||||
|
|
||||||
Seems to be stable on the test machine, but needs more testing on other
|
|
||||||
machines. Simultaneous accesses of the DDC and I2C busses may cause errors.
|
|
||||||
|
|
||||||
Supported Devices
|
|
||||||
-----------------
|
|
||||||
|
|
||||||
Specifically, this driver was written and tested on the '3dfx Voodoo3 AGP
|
|
||||||
3000' which has a tv-out feature (s-video or composite). According to the
|
|
||||||
docs and discussions, this code should work for any Voodoo3 based cards as
|
|
||||||
well as Voodoo Banshee based cards. The DDC interface has been tested on a
|
|
||||||
Voodoo Banshee card.
|
|
||||||
|
|
||||||
Issues
|
|
||||||
------
|
|
||||||
|
|
||||||
Probably many, but it seems to work OK on my system. :')
|
|
||||||
|
|
||||||
|
|
||||||
External Device Connection
|
|
||||||
--------------------------
|
|
||||||
|
|
||||||
The digital video input jumpers give availability to the I2C bus.
|
|
||||||
Specifically, pins 13 and 25 (bottom row middle, and bottom right-end) are
|
|
||||||
the I2C clock and I2C data lines, respectively. +5V and GND are probably
|
|
||||||
also easily available making the addition of extra I2C/SMBus devices easy
|
|
||||||
to implement.
|
|
||||||
|
|
@ -640,22 +640,6 @@ config I2C_TINY_USB
|
||||||
This driver can also be built as a module. If so, the module
|
This driver can also be built as a module. If so, the module
|
||||||
will be called i2c-tiny-usb.
|
will be called i2c-tiny-usb.
|
||||||
|
|
||||||
comment "Graphics adapter I2C/DDC channel drivers"
|
|
||||||
depends on PCI
|
|
||||||
|
|
||||||
config I2C_VOODOO3
|
|
||||||
tristate "Voodoo 3 (DEPRECATED)"
|
|
||||||
depends on PCI
|
|
||||||
select I2C_ALGOBIT
|
|
||||||
help
|
|
||||||
If you say yes to this option, support will be included for the
|
|
||||||
Voodoo 3 I2C interface. This driver is deprecated and you should
|
|
||||||
use the tdfxfb driver instead, which additionally provides
|
|
||||||
framebuffer support.
|
|
||||||
|
|
||||||
This driver can also be built as a module. If so, the module
|
|
||||||
will be called i2c-voodoo3.
|
|
||||||
|
|
||||||
comment "Other I2C/SMBus bus drivers"
|
comment "Other I2C/SMBus bus drivers"
|
||||||
|
|
||||||
config I2C_ACORN
|
config I2C_ACORN
|
||||||
|
|
|
||||||
|
|
@ -61,9 +61,6 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
|
||||||
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
|
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
|
||||||
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
|
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
|
||||||
|
|
||||||
# Graphics adapter I2C/DDC channel drivers
|
|
||||||
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
|
|
||||||
|
|
||||||
# Other I2C/SMBus bus drivers
|
# Other I2C/SMBus bus drivers
|
||||||
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
|
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
|
||||||
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
||||||
|
|
|
||||||
|
|
@ -1,248 +0,0 @@
|
||||||
/*
|
|
||||||
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
|
|
||||||
Philip Edelbrock <phil@netroedge.com>,
|
|
||||||
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
|
||||||
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
||||||
|
|
||||||
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
|
||||||
Simon Vogl
|
|
||||||
|
|
||||||
This program is free software; you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation; either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program; if not, write to the Free Software
|
|
||||||
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* This interfaces to the I2C bus of the Voodoo3 to gain access to
|
|
||||||
the BT869 and possibly other I2C devices. */
|
|
||||||
|
|
||||||
#include <linux/kernel.h>
|
|
||||||
#include <linux/module.h>
|
|
||||||
#include <linux/init.h>
|
|
||||||
#include <linux/pci.h>
|
|
||||||
#include <linux/i2c.h>
|
|
||||||
#include <linux/i2c-algo-bit.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
|
|
||||||
/* the only registers we use */
|
|
||||||
#define REG 0x78
|
|
||||||
#define REG2 0x70
|
|
||||||
|
|
||||||
/* bit locations in the register */
|
|
||||||
#define DDC_ENAB 0x00040000
|
|
||||||
#define DDC_SCL_OUT 0x00080000
|
|
||||||
#define DDC_SDA_OUT 0x00100000
|
|
||||||
#define DDC_SCL_IN 0x00200000
|
|
||||||
#define DDC_SDA_IN 0x00400000
|
|
||||||
#define I2C_ENAB 0x00800000
|
|
||||||
#define I2C_SCL_OUT 0x01000000
|
|
||||||
#define I2C_SDA_OUT 0x02000000
|
|
||||||
#define I2C_SCL_IN 0x04000000
|
|
||||||
#define I2C_SDA_IN 0x08000000
|
|
||||||
|
|
||||||
/* initialization states */
|
|
||||||
#define INIT2 0x2
|
|
||||||
#define INIT3 0x4
|
|
||||||
|
|
||||||
/* delays */
|
|
||||||
#define CYCLE_DELAY 10
|
|
||||||
#define TIMEOUT (HZ / 2)
|
|
||||||
|
|
||||||
|
|
||||||
static void __iomem *ioaddr;
|
|
||||||
|
|
||||||
/* The voo GPIO registers don't have individual masks for each bit
|
|
||||||
so we always have to read before writing. */
|
|
||||||
|
|
||||||
static void bit_vooi2c_setscl(void *data, int val)
|
|
||||||
{
|
|
||||||
unsigned int r;
|
|
||||||
r = readl(ioaddr + REG);
|
|
||||||
if (val)
|
|
||||||
r |= I2C_SCL_OUT;
|
|
||||||
else
|
|
||||||
r &= ~I2C_SCL_OUT;
|
|
||||||
writel(r, ioaddr + REG);
|
|
||||||
readl(ioaddr + REG); /* flush posted write */
|
|
||||||
}
|
|
||||||
|
|
||||||
static void bit_vooi2c_setsda(void *data, int val)
|
|
||||||
{
|
|
||||||
unsigned int r;
|
|
||||||
r = readl(ioaddr + REG);
|
|
||||||
if (val)
|
|
||||||
r |= I2C_SDA_OUT;
|
|
||||||
else
|
|
||||||
r &= ~I2C_SDA_OUT;
|
|
||||||
writel(r, ioaddr + REG);
|
|
||||||
readl(ioaddr + REG); /* flush posted write */
|
|
||||||
}
|
|
||||||
|
|
||||||
/* The GPIO pins are open drain, so the pins always remain outputs.
|
|
||||||
We rely on the i2c-algo-bit routines to set the pins high before
|
|
||||||
reading the input from other chips. */
|
|
||||||
|
|
||||||
static int bit_vooi2c_getscl(void *data)
|
|
||||||
{
|
|
||||||
return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
|
|
||||||
}
|
|
||||||
|
|
||||||
static int bit_vooi2c_getsda(void *data)
|
|
||||||
{
|
|
||||||
return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
|
|
||||||
}
|
|
||||||
|
|
||||||
static void bit_vooddc_setscl(void *data, int val)
|
|
||||||
{
|
|
||||||
unsigned int r;
|
|
||||||
r = readl(ioaddr + REG);
|
|
||||||
if (val)
|
|
||||||
r |= DDC_SCL_OUT;
|
|
||||||
else
|
|
||||||
r &= ~DDC_SCL_OUT;
|
|
||||||
writel(r, ioaddr + REG);
|
|
||||||
readl(ioaddr + REG); /* flush posted write */
|
|
||||||
}
|
|
||||||
|
|
||||||
static void bit_vooddc_setsda(void *data, int val)
|
|
||||||
{
|
|
||||||
unsigned int r;
|
|
||||||
r = readl(ioaddr + REG);
|
|
||||||
if (val)
|
|
||||||
r |= DDC_SDA_OUT;
|
|
||||||
else
|
|
||||||
r &= ~DDC_SDA_OUT;
|
|
||||||
writel(r, ioaddr + REG);
|
|
||||||
readl(ioaddr + REG); /* flush posted write */
|
|
||||||
}
|
|
||||||
|
|
||||||
static int bit_vooddc_getscl(void *data)
|
|
||||||
{
|
|
||||||
return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
|
|
||||||
}
|
|
||||||
|
|
||||||
static int bit_vooddc_getsda(void *data)
|
|
||||||
{
|
|
||||||
return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
|
|
||||||
}
|
|
||||||
|
|
||||||
static int config_v3(struct pci_dev *dev)
|
|
||||||
{
|
|
||||||
unsigned long cadr;
|
|
||||||
|
|
||||||
/* map Voodoo3 memory */
|
|
||||||
cadr = dev->resource[0].start;
|
|
||||||
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
||||||
ioaddr = ioremap_nocache(cadr, 0x1000);
|
|
||||||
if (ioaddr) {
|
|
||||||
writel(0x8160, ioaddr + REG2);
|
|
||||||
writel(0xcffc0020, ioaddr + REG);
|
|
||||||
dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
return -ENODEV;
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct i2c_algo_bit_data voo_i2c_bit_data = {
|
|
||||||
.setsda = bit_vooi2c_setsda,
|
|
||||||
.setscl = bit_vooi2c_setscl,
|
|
||||||
.getsda = bit_vooi2c_getsda,
|
|
||||||
.getscl = bit_vooi2c_getscl,
|
|
||||||
.udelay = CYCLE_DELAY,
|
|
||||||
.timeout = TIMEOUT
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct i2c_adapter voodoo3_i2c_adapter = {
|
|
||||||
.owner = THIS_MODULE,
|
|
||||||
.name = "I2C Voodoo3/Banshee adapter",
|
|
||||||
.algo_data = &voo_i2c_bit_data,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct i2c_algo_bit_data voo_ddc_bit_data = {
|
|
||||||
.setsda = bit_vooddc_setsda,
|
|
||||||
.setscl = bit_vooddc_setscl,
|
|
||||||
.getsda = bit_vooddc_getsda,
|
|
||||||
.getscl = bit_vooddc_getscl,
|
|
||||||
.udelay = CYCLE_DELAY,
|
|
||||||
.timeout = TIMEOUT
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct i2c_adapter voodoo3_ddc_adapter = {
|
|
||||||
.owner = THIS_MODULE,
|
|
||||||
.class = I2C_CLASS_DDC,
|
|
||||||
.name = "DDC Voodoo3/Banshee adapter",
|
|
||||||
.algo_data = &voo_ddc_bit_data,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct pci_device_id voodoo3_ids[] __devinitdata = {
|
|
||||||
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
|
|
||||||
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
|
|
||||||
{ 0, }
|
|
||||||
};
|
|
||||||
|
|
||||||
MODULE_DEVICE_TABLE (pci, voodoo3_ids);
|
|
||||||
|
|
||||||
static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
||||||
{
|
|
||||||
int retval;
|
|
||||||
|
|
||||||
retval = config_v3(dev);
|
|
||||||
if (retval)
|
|
||||||
return retval;
|
|
||||||
|
|
||||||
/* set up the sysfs linkage to our parent device */
|
|
||||||
voodoo3_i2c_adapter.dev.parent = &dev->dev;
|
|
||||||
voodoo3_ddc_adapter.dev.parent = &dev->dev;
|
|
||||||
|
|
||||||
retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
|
|
||||||
if (retval)
|
|
||||||
return retval;
|
|
||||||
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
|
|
||||||
if (retval)
|
|
||||||
i2c_del_adapter(&voodoo3_i2c_adapter);
|
|
||||||
return retval;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void __devexit voodoo3_remove(struct pci_dev *dev)
|
|
||||||
{
|
|
||||||
i2c_del_adapter(&voodoo3_i2c_adapter);
|
|
||||||
i2c_del_adapter(&voodoo3_ddc_adapter);
|
|
||||||
iounmap(ioaddr);
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct pci_driver voodoo3_driver = {
|
|
||||||
.name = "voodoo3_smbus",
|
|
||||||
.id_table = voodoo3_ids,
|
|
||||||
.probe = voodoo3_probe,
|
|
||||||
.remove = __devexit_p(voodoo3_remove),
|
|
||||||
};
|
|
||||||
|
|
||||||
static int __init i2c_voodoo3_init(void)
|
|
||||||
{
|
|
||||||
return pci_register_driver(&voodoo3_driver);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void __exit i2c_voodoo3_exit(void)
|
|
||||||
{
|
|
||||||
pci_unregister_driver(&voodoo3_driver);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
|
||||||
"Philip Edelbrock <phil@netroedge.com>, "
|
|
||||||
"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
|
|
||||||
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
|
||||||
MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
|
|
||||||
MODULE_LICENSE("GPL");
|
|
||||||
|
|
||||||
module_init(i2c_voodoo3_init);
|
|
||||||
module_exit(i2c_voodoo3_exit);
|
|
||||||
Loading…
Reference in New Issue