Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6

Pull fixes in from 2.6.31 so that people testing the iommu-2.6.git tree
no longer trip over bugs which were already fixed (sorry, Horms).

CREDITS

@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,6 +2006,9 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jonathan Layes
+D: ARPD support
+
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,

Documentation/ABI/testing/sysfs-block

@@ -94,28 +94,37 @@ What:		/sys/block/<disk>/queue/physical_block_size
 Date:		May 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		This is the smallest unit the storage device can write
+		This is the smallest unit a physical storage device can
-		without resorting to read-modify-write operation.  It is
+		write atomically.  It is usually the same as the logical
-		usually the same as the logical block size but may be
+		block size but may be bigger.  One example is SATA
-		bigger.  One example is SATA drives with 4KB sectors
+		drives with 4KB sectors that expose a 512-byte logical
-		that expose a 512-byte logical block size to the
+		block size to the operating system.  For stacked block
-		operating system.
+		devices the physical_block_size variable contains the
+		maximum physical_block_size of the component devices.
 
 What:		/sys/block/<disk>/queue/minimum_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Storage devices may report a preferred minimum I/O size,
+		Storage devices may report a granularity or preferred
-		which is the smallest request the device can perform
+		minimum I/O size which is the smallest request the
-		without incurring a read-modify-write penalty.  For disk
+		device can perform without incurring a performance
-		drives this is often the physical block size.  For RAID
+		penalty.  For disk drives this is often the physical
-		arrays it is often the stripe chunk size.
+		block size.  For RAID arrays it is often the stripe
+		chunk size.  A properly aligned multiple of
+		minimum_io_size is the preferred request size for
+		workloads where a high number of I/O operations is
+		desired.
 
 What:		/sys/block/<disk>/queue/optimal_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
 		Storage devices may report an optimal I/O size, which is
-		the device's preferred unit of receiving I/O.  This is
+		the device's preferred unit for sustained I/O.  This is
-		rarely reported for disk drives.  For RAID devices it is
+		rarely reported for disk drives.  For RAID arrays it is
-		usually the stripe width or the internal block size.
+		usually the stripe width or the internal track size.  A
+		properly aligned multiple of optimal_io_size is the
+		preferred request size for workloads where sustained
+		throughput is desired.  If no optimal I/O size is
+		reported this file contains 0.

Documentation/DocBook/kernel-hacking.tmpl

@@ -449,8 +449,8 @@ printk(KERN_INFO "i = %u\n", i);
    </para>
 
    <programlisting>
-__u32 ipaddress;
+__be32 ipaddress;
-printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
+printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
    </programlisting>
 
    <para>

Documentation/DocBook/mac80211.tmpl

@@ -184,8 +184,6 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues

Documentation/RCU/rculist_nulls.txt

@@ -83,11 +83,12 @@ not detect it missed following items in original chain.
 obj = kmem_cache_alloc(...);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
-atomic_inc(&obj->refcnt);
 /*
  * we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
  */
 smp_wmb();
+atomic_set(&obj->refcnt, 1);
 hlist_add_head_rcu(&obj->obj_node, list);
 unlock_chain(); // typically a spin_unlock()
 
@@ -159,6 +160,10 @@ out:
 obj = kmem_cache_alloc(cachep);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
 atomic_set(&obj->refcnt, 1);
 /*
  * insert obj in RCU way (readers might be traversing chain)

Documentation/connector/cn_test.c

@@ -1,7 +1,7 @@
 /*
  * 	cn_test.c
  * 
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -194,5 +194,5 @@ module_init(cn_test_init);
 module_exit(cn_test_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Connector's test module");

Documentation/connector/ucon.c

@@ -1,7 +1,7 @@
 /*
  * 	ucon.c
  *
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
  *
  *
  * This program is free software; you can redistribute it and/or modify

Documentation/driver-model/driver.txt

@@ -207,8 +207,8 @@ Attributes
 ~~~~~~~~~~
 struct driver_attribute {
         struct attribute        attr;
-        ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
+        ssize_t (*show)(struct device_driver *driver, char *buf);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
 };
 
 Device drivers can export attributes via their sysfs directories. 

Documentation/dvb/get_dvb_firmware

@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@ sub cx18 {
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 

Documentation/feature-removal-schedule.txt

@@ -458,3 +458,13 @@ Why:	Remove the old legacy 32bit machine check code. This has been
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>

Documentation/filesystems/sysfs.txt

@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 

Documentation/kernel-parameters.txt

@@ -1720,8 +1720,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.cpu_type=	Force an oprofile cpu type
 			This might be useful if you have an older oprofile
 			userland or if you want common events.
-			Format: { archperfmon }
+			Format: { arch_perfmon }
-			archperfmon: [X86] Force use of architectural
+			arch_perfmon: [X86] Force use of architectural
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 

Documentation/laptops/thinkpad-acpi.txt

@@ -36,8 +36,6 @@ detailed description):
 	- Bluetooth enable and disable
 	- video output switching, expansion control
 	- ThinkLight on and off
-	- limited docking and undocking
-	- UltraBay eject
 	- CMOS/UCMS control
 	- LED control
 	- ACPI sounds
@@ -729,131 +727,6 @@ cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
 It is impossible to know if the status returned through sysfs is valid.
 
 
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
-	ibm/dock GDCK 00000003 00000001 -- eject request
-	ibm/dock GDCK 00000003 00000002 -- undocked
-	ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
-	echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
-	echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
-	ibm/bay MSTR 00000003 00000000 -- eject request
-	ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
-	echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
-	echo eject > /proc/acpi/ibm/bay
-	put the ThinkPad to sleep
-	remove the drive
-	resume from sleep
-	cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-
 CMOS/UCMS control
 -----------------
 

Documentation/networking/6pack.txt

@@ -1,7 +1,7 @@
 This is the 6pack-mini-HOWTO, written by
 
 Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
 AMPR-net: dg3kq@db0pra.ampr.org
 AX.25:    dg3kq@db0ach.#nrw.deu.eu
 

Documentation/scheduler/sched-rt-group.txt

@@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because
 realtime tasks have explicitly allocated the CPU time they need to perform
 their tasks, buffer underruns in the graphics or audio can be eliminated.
 
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
 lack an EDF scheduler to make non-uniform periods usable.
 
 
@@ -140,14 +140,15 @@ The other option is:
 
 .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
 
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
+This uses the /cgroup virtual file system and
-to control the CPU time reserved for each control group instead.
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
 
-Group settings are checked against the following limits in order to keep the configuration
+Group settings are checked against the following limits in order to keep the
-schedulable:
+configuration schedulable:
 
    \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
 
@@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
 the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
 
 This means the whole PI machinery will have to be reworked - and that is one of
 the most complex pieces of code we have.

Documentation/sound/alsa/Procfile.txt

@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
 	  bit 0 = Enable XRUN/jiffies debug messages
 	  bit 1 = Show stack trace at XRUN / jiffies check
 	  bit 2 = Enable additional jiffies check
+	  bit 3 = Log hwptr update at each period interrupt
+	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
 	buggy) hardware that doesn't give smooth pointer updates.
 	This feature is enabled via the bit 2.
 
+	Bits 3 and 4 are for logging the hwptr records.  Note that
+	these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

Documentation/sysrq.txt

@@ -66,7 +66,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
-'c'	- Will perform a kexec reboot in order to take a crashdump.
+'c'	- Will perform a system crash by a NULL pointer dereference.
+          A crashdump will be taken if configured.
 
 'd'	- Shows all locks that are held.
 
@@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+Note that this just triggers a crash if there is no dump mechanism available.
 
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note

Documentation/video4linux/CARDLIST.em28xx

@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)
@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)

Documentation/video4linux/gspca.txt

@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x		0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x		0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x		0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x		0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x		0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x		0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x		0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x		0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x		0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x		0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+sn9c20x		145f:013d	Trust WB-3600R
 vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
+sn9c20x		a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561		abcd:cdee	Petcam

Documentation/x86/00-INDEX

@@ -2,3 +2,5 @@
 	- this file
 mtrr.txt
 	- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+	- why and how Linux kernel uses exception tables on x86

Documentation/x86/exception-tables.txt

@@ -1,123 +1,123 @@
-     Kernel level exception handling in Linux 2.1.8
+     Kernel level exception handling in Linux
   Commentary by Joerg Pommnitz <joerg@raleigh.ibm.com>
 
-When a process runs in kernel mode, it often has to access user 
+When a process runs in kernel mode, it often has to access user
-mode memory whose address has been passed by an untrusted program. 
+mode memory whose address has been passed by an untrusted program.
 To protect itself the kernel has to verify this address.
 
-In older versions of Linux this was done with the 
+In older versions of Linux this was done with the
-int verify_area(int type, const void * addr, unsigned long size) 
+int verify_area(int type, const void * addr, unsigned long size)
 function (which has since been replaced by access_ok()).
 
-This function verified that the memory area starting at address 
+This function verified that the memory area starting at address
 'addr' and of size 'size' was accessible for the operation specified
-in type (read or write). To do this, verify_read had to look up the 
+in type (read or write). To do this, verify_read had to look up the
-virtual memory area (vma) that contained the address addr. In the 
+virtual memory area (vma) that contained the address addr. In the
-normal case (correctly working program), this test was successful. 
+normal case (correctly working program), this test was successful.
 It only failed for a few buggy programs. In some kernel profiling
 tests, this normally unneeded verification used up a considerable
 amount of time.
 
-To overcome this situation, Linus decided to let the virtual memory 
+To overcome this situation, Linus decided to let the virtual memory
 hardware present in every Linux-capable CPU handle this test.
 
 How does this work?
 
-Whenever the kernel tries to access an address that is currently not 
+Whenever the kernel tries to access an address that is currently not
-accessible, the CPU generates a page fault exception and calls the 
+accessible, the CPU generates a page fault exception and calls the
-page fault handler 
+page fault handler
 
 void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
-in arch/i386/mm/fault.c. The parameters on the stack are set up by 
+in arch/x86/mm/fault.c. The parameters on the stack are set up by
-the low level assembly glue in arch/i386/kernel/entry.S. The parameter
+the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter
-regs is a pointer to the saved registers on the stack, error_code 
+regs is a pointer to the saved registers on the stack, error_code
 contains a reason code for the exception.
 
-do_page_fault first obtains the unaccessible address from the CPU 
+do_page_fault first obtains the unaccessible address from the CPU
-control register CR2. If the address is within the virtual address 
+control register CR2. If the address is within the virtual address
-space of the process, the fault probably occurred, because the page 
+space of the process, the fault probably occurred, because the page
-was not swapped in, write protected or something similar. However, 
+was not swapped in, write protected or something similar. However,
-we are interested in the other case: the address is not valid, there 
+we are interested in the other case: the address is not valid, there
-is no vma that contains this address. In this case, the kernel jumps 
+is no vma that contains this address. In this case, the kernel jumps
-to the bad_area label. 
+to the bad_area label.
 
-There it uses the address of the instruction that caused the exception 
+There it uses the address of the instruction that caused the exception
-(i.e. regs->eip) to find an address where the execution can continue 
+(i.e. regs->eip) to find an address where the execution can continue
-(fixup). If this search is successful, the fault handler modifies the 
+(fixup). If this search is successful, the fault handler modifies the
-return address (again regs->eip) and returns. The execution will 
+return address (again regs->eip) and returns. The execution will
 continue at the address in fixup.
 
 Where does fixup point to?
 
-Since we jump to the contents of fixup, fixup obviously points 
+Since we jump to the contents of fixup, fixup obviously points
-to executable code. This code is hidden inside the user access macros. 
+to executable code. This code is hidden inside the user access macros.
-I have picked the get_user macro defined in include/asm/uaccess.h as an
+I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
-example. The definition is somewhat hard to follow, so let's peek at 
+as an example. The definition is somewhat hard to follow, so let's peek at
 the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/console.c for a detailed examination.
+the get_user call in drivers/char/sysrq.c for a detailed examination.
 
-The original code in console.c line 1405:
+The original code in sysrq.c line 587:
         get_user(c, buf);
 
 The preprocessor output (edited to become somewhat readable):
 
 (
-  {        
+  {
-    long __gu_err = - 14 , __gu_val = 0;        
+    long __gu_err = - 14 , __gu_val = 0;
-    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));        
+    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));
-    if (((((0 + current_set[0])->tss.segment) == 0x18 )  || 
+    if (((((0 + current_set[0])->tss.segment) == 0x18 )  ||
-       (((sizeof(*(buf))) <= 0xC0000000UL) && 
+       (((sizeof(*(buf))) <= 0xC0000000UL) &&
-       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))        
+       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
       do {
-        __gu_err  = 0;        
+        __gu_err  = 0;
-        switch ((sizeof(*(buf)))) {        
+        switch ((sizeof(*(buf)))) {
-          case 1: 
+          case 1:
-            __asm__ __volatile__(        
-              "1:      mov" "b" " %2,%" "b" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "b" " %" "b" "1,%" "b" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
-              ".text"        : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ; 
-              break;        
-          case 2: 
             __asm__ __volatile__(
-              "1:      mov" "w" " %2,%" "w" "1\n"        
+              "1:      mov" "b" " %2,%" "b" "1\n"
-              "2:\n"        
+              "2:\n"
-              ".section .fixup,\"ax\"\n"        
+              ".section .fixup,\"ax\"\n"
-              "3:      movl %3,%0\n"        
+              "3:      movl %3,%0\n"
-              "        xor" "w" " %" "w" "1,%" "w" "1\n"        
+              "        xor" "b" " %" "b" "1,%" "b" "1\n"
-              "        jmp 2b\n"        
+              "        jmp 2b\n"
-              ".section __ex_table,\"a\"\n"        
+              ".section __ex_table,\"a\"\n"
-              "        .align 4\n"        
+              "        .align 4\n"
-              "        .long 1b,3b\n"        
+              "        .long 1b,3b\n"
+              ".text"        : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ;
+              break;
+          case 2:
+            __asm__ __volatile__(
+              "1:      mov" "w" " %2,%" "w" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "w" " %" "w" "1,%" "w" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )); 
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  ));
-              break;        
+              break;
-          case 4: 
+          case 4:
-            __asm__ __volatile__(        
+            __asm__ __volatile__(
-              "1:      mov" "l" " %2,%" "" "1\n"        
+              "1:      mov" "l" " %2,%" "" "1\n"
-              "2:\n"        
+              "2:\n"
-              ".section .fixup,\"ax\"\n"        
+              ".section .fixup,\"ax\"\n"
-              "3:      movl %3,%0\n"        
+              "3:      movl %3,%0\n"
-              "        xor" "l" " %" "" "1,%" "" "1\n"        
+              "        xor" "l" " %" "" "1,%" "" "1\n"
-              "        jmp 2b\n"        
+              "        jmp 2b\n"
-              ".section __ex_table,\"a\"\n"        
+              ".section __ex_table,\"a\"\n"
-              "        .align 4\n"        "        .long 1b,3b\n"        
+              "        .align 4\n"        "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err)); 
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err));
-              break;        
+              break;
-          default: 
+          default:
-            (__gu_val) = __get_user_bad();        
+            (__gu_val) = __get_user_bad();
-        }        
+        }
-      } while (0) ;        
+      } while (0) ;
-    ((c)) = (__typeof__(*((buf))))__gu_val;        
+    ((c)) = (__typeof__(*((buf))))__gu_val;
     __gu_err;
   }
 );
@@ -127,12 +127,12 @@ see what code gcc generates:
 
  >         xorl %edx,%edx
  >         movl current_set,%eax
- >         cmpl $24,788(%eax)        
+ >         cmpl $24,788(%eax)
- >         je .L1424        
+ >         je .L1424
  >         cmpl $-1073741825,64(%esp)
- >         ja .L1423                
+ >         ja .L1423
  > .L1424:
- >         movl %edx,%eax                        
+ >         movl %edx,%eax
  >         movl 64(%esp),%ebx
  > #APP
  > 1:      movb (%ebx),%dl                /* this is the actual user access */
@@ -149,17 +149,17 @@ see what code gcc generates:
  > .L1423:
  >         movzbl %dl,%esi
 
-The optimizer does a good job and gives us something we can actually 
+The optimizer does a good job and gives us something we can actually
-understand. Can we? The actual user access is quite obvious. Thanks 
+understand. Can we? The actual user access is quite obvious. Thanks
-to the unified address space we can just access the address in user 
+to the unified address space we can just access the address in user
 memory. But what does the .section stuff do?????
 
 To understand this we have to look at the final kernel:
 
  > objdump --section-headers vmlinux
- > 
+ >
  > vmlinux:     file format elf32-i386
- > 
+ >
  > Sections:
  > Idx Name          Size      VMA       LMA       File off  Algn
  >   0 .text         00098f40  c0100000  c0100000  00001000  2**4
@@ -198,18 +198,18 @@ final kernel executable:
 
 The whole user memory access is reduced to 10 x86 machine instructions.
 The instructions bracketed in the .section directives are no longer
-in the normal execution path. They are located in a different section 
+in the normal execution path. They are located in a different section
 of the executable file:
 
  > objdump --disassemble --section=.fixup vmlinux
- > 
+ >
  > c0199ff5 <.fixup+10b5> movl   $0xfffffff2,%eax
  > c0199ffa <.fixup+10ba> xorb   %dl,%dl
  > c0199ffc <.fixup+10bc> jmp    c017e7a7 <do_con_write+e3>
 
 And finally:
  > objdump --full-contents --section=__ex_table vmlinux
- > 
+ >
  >  c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0  ................
  >  c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0  ................
  >  c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0  ................
@@ -235,8 +235,8 @@ sections in the ELF object file. So the instructions
 ended up in the .fixup section of the object file and the addresses
         .long 1b,3b
 ended up in the __ex_table section of the object file. 1b and 3b
-are local labels. The local label 1b (1b stands for next label 1 
+are local labels. The local label 1b (1b stands for next label 1
-backward) is the address of the instruction that might fault, i.e. 
+backward) is the address of the instruction that might fault, i.e.
 in our case the address of the label 1 is c017e7a5:
 the original assembly code: > 1:      movb (%ebx),%dl
 and linked in vmlinux     : > c017e7a5 <do_con_write+e1> movb   (%ebx),%dl
@@ -254,7 +254,7 @@ The assembly code
 becomes the value pair
  >  c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5  ................
                                ^this is ^this is
-                               1b       3b 
+                               1b       3b
 c017e7a5,c0199ff5 in the exception table of the kernel.
 
 So, what actually happens if a fault from kernel mode with no suitable
@@ -266,9 +266,9 @@ vma occurs?
 3.) CPU calls do_page_fault
 4.) do page fault calls search_exception_table (regs->eip == c017e7a5);
 5.) search_exception_table looks up the address c017e7a5 in the
-    exception table (i.e. the contents of the ELF section __ex_table) 
+    exception table (i.e. the contents of the ELF section __ex_table)
     and returns the address of the associated fault handle code c0199ff5.
-6.) do_page_fault modifies its own return address to point to the fault 
+6.) do_page_fault modifies its own return address to point to the fault
     handle code and returns.
 7.) execution continues in the fault handling code.
 8.) 8a) EAX becomes -EFAULT (== -14)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -343,7 +343,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
-		   -Wno-format-security
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -565,7 +566,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)

arch/alpha/include/asm/thread_info.h

@@ -37,6 +37,7 @@ struct thread_info {
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
 	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\

arch/alpha/include/asm/tlb.h

@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
  
 #endif

arch/alpha/kernel/ptrace.c

@@ -8,7 +8,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
+# Linux kernel version: 2.6.31-rc3
-# Mon Jun  1 09:18:22 2009
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,7 +66,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +78,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -94,6 +96,10 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -106,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,9 +144,9 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -216,8 +222,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -243,7 +249,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -258,17 +263,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -359,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +504,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -533,12 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
 
 #
 # External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
 
 #
 # SPI Protocol Masters
@@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
+CONFIG_AB3100_CORE=y
-#
+# CONFIG_EZX_PCAP is not set
-# Multimedia devices
+# CONFIG_MEDIA_SUPPORT is not set
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -760,6 +761,11 @@ CONFIG_SND_JACK=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -887,7 +894,10 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -900,16 +910,19 @@ CONFIG_REGULATOR=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1033,6 +1046,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1077,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
+CONFIG_FTRACE=y
-#
-# Tracers
-#
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set

arch/arm/include/asm/pgtable.h

@@ -285,15 +285,6 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_special(pte)	(0)
 
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -384,16 +375,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
  *
- * We support up to 32GB of swap on 4k machines
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------------> <--- type --> 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
  */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
+#define __SWP_TYPE_SHIFT	2
-#define __swp_offset(x)		((x).val >> 9)
+#define __SWP_TYPE_BITS		7
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)

arch/arm/include/asm/thread_info.h

@@ -73,7 +73,7 @@ struct thread_info {
 	.task		= &tsk,						\
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
 	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\

arch/arm/include/asm/tlb.h

@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 

arch/arm/mach-at91/include/mach/at_hdmac.h

@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */

arch/arm/mach-ep93xx/dma-m2p.c

@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>

arch/arm/mach-kirkwood/mpp.h

@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )

arch/arm/mach-mx3/Kconfig

@@ -36,6 +36,14 @@ config MACH_PCM037
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31

arch/arm/mach-mx3/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o

arch/arm/mach-mx3/armadillo5x0.c

@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= CS0_BASE_ADDR,
+	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/devices.c

@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>

arch/arm/mach-mx3/pcm037.c

@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
 	/* I2C */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_2_devices[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		.type = "pcf8563",
 	}
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
 		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
 	},
 };
 
@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
 	}
 
 
-#ifdef CONFIG_I2C_IMX
+	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 	if (!gpio_usbotg_hs_activate())
 		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
-

arch/arm/mach-mx3/pcm037.h

@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif

arch/arm/mach-mx3/pcm037_eet.c

@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* SPI #1 */
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pcm037_gpio_keys_platform_data,
+	},
+};
+
+static int eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+	platform_device_register(&pcm037_gpio_keys_device);
+
+	return 0;
+}
+
+late_initcall(eet_init_devices);

arch/arm/mach-pxa/include/mach/mfp-pxa300.h

@@ -567,9 +567,9 @@
 #define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
 #define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
 
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
 #endif /* CONFIG_CPU_PXA310 */
 
 #endif /* __ASM_ARCH_MFP_PXA300_H */

arch/arm/mach-pxa/pxa3xx.c

@@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),

arch/arm/mach-realview/core.c

@@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = {
 
 static struct i2c_board_info realview_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-		.type = "ds1338",
 	},
 };
 

arch/arm/mach-u300/clock.c

@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/seq_file.h>
 
 #include <asm/clkdev.h>
 #include <mach/hardware.h>
@@ -702,6 +703,7 @@ static struct clk amba_clk = {
 	.rate	    = 52000000, /* this varies! */
 	.hw_ctrld   = true,
 	.reset	    = false,
+	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
 };
 
 /*
@@ -720,6 +722,7 @@ static struct clk cpu_clk = {
 	.set_rate   = clk_set_rate_cpuclk,
 	.get_rate   = clk_get_rate_cpuclk,
 	.round_rate = clk_round_rate_cpuclk,
+	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
 };
 
 static struct clk nandif_clk = {
@@ -732,6 +735,7 @@ static struct clk nandif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
 };
 
 static struct clk semi_clk = {
@@ -744,6 +748,7 @@ static struct clk semi_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@ static struct clk isp_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
 };
 
 static struct clk cds_clk = {
@@ -771,6 +777,7 @@ static struct clk cds_clk = {
 	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
 };
 #endif
 
@@ -785,6 +792,7 @@ static struct clk dma_clk = {
 	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
 };
 
 static struct clk aaif_clk = {
@@ -798,6 +806,7 @@ static struct clk aaif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
 };
 
 static struct clk apex_clk = {
@@ -811,6 +820,7 @@ static struct clk apex_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
 };
 
 static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@ static struct clk video_enc_clk = {
 	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
 };
 
 static struct clk xgam_clk = {
@@ -839,6 +850,7 @@ static struct clk xgam_clk = {
 	.get_rate   = clk_get_rate_xgamclk,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
 };
 
 /* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@ static struct clk ahb_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
 };
 
 
@@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
 };
 
 static struct clk intcon_clk = {
@@ -882,6 +896,8 @@ static struct clk intcon_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
 	/* INTCON can be reset but not clock-gated */
+	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
 };
 
 static struct clk mspro_clk = {
@@ -895,6 +911,7 @@ static struct clk mspro_clk = {
 	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
 };
 
 static struct clk emif_clk = {
@@ -909,6 +926,7 @@ static struct clk emif_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_emif_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
 };
 
 
@@ -926,6 +944,7 @@ static struct clk fast_clk = {
 	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 };
 
 static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@ static struct clk mmcsd_clk = {
 	.round_rate = clk_round_rate_mclk,
 	.disable    = syscon_clk_disable,
 	.enable     = syscon_clk_enable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
 };
 
 static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@ static struct clk i2s0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
 };
 
 static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@ static struct clk i2s1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
 };
 
 static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@ static struct clk i2c0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
 };
 
 static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@ static struct clk i2c1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
 };
 
 static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@ static struct clk spi_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@ static struct clk uart1_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
 };
 #endif
 
@@ -1044,6 +1070,7 @@ static struct clk slow_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
 };
 
 /* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@ static struct clk wdog_clk = {
 	.rate	    = 32768,
 	.reset	    = false,
 	/* This is always on, cannot be enabled/disabled or reset */
+	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
 };
 
 /* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@ static struct clk uart_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
 };
 
 static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@ static struct clk keypad_clk = {
 	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
 };
 
 static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@ static struct clk gpio_clk = {
 	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
 };
 
 static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@ static struct clk rtc_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
 	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
 	/* This clock is always on, cannot be enabled/disabled */
+	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
 };
 
 static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@ static struct clk bustr_clk = {
 	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
 };
 
 static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@ static struct clk evhist_clk = {
 	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
 };
 
 static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@ static struct clk timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
 };
 
 static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@ static struct clk ppm_clk = {
 	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
 };
 #endif
 
@@ -1187,53 +1224,53 @@ static struct clk ppm_clk = {
  */
 static struct clk_lookup lookups[] = {
 	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba", &amba_clk),
+	DEF_LOOKUP("amba",      &amba_clk),
-	DEF_LOOKUP("cpu", &cpu_clk),
+	DEF_LOOKUP("cpu",       &cpu_clk),
-	DEF_LOOKUP("nandif", &nandif_clk),
+	DEF_LOOKUP("fsmc",      &nandif_clk),
-	DEF_LOOKUP("semi", &semi_clk),
+	DEF_LOOKUP("semi",      &semi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp", &isp_clk),
+	DEF_LOOKUP("isp",       &isp_clk),
-	DEF_LOOKUP("cds", &cds_clk),
+	DEF_LOOKUP("cds",       &cds_clk),
 #endif
-	DEF_LOOKUP("dma", &dma_clk),
+	DEF_LOOKUP("dma",       &dma_clk),
-	DEF_LOOKUP("aaif", &aaif_clk),
+	DEF_LOOKUP("msl",       &aaif_clk),
-	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("apex",      &apex_clk),
 	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam", &xgam_clk),
+	DEF_LOOKUP("xgam",      &xgam_clk),
-	DEF_LOOKUP("ahb", &ahb_clk),
+	DEF_LOOKUP("ahb",       &ahb_clk),
 	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb", &ahb_subsys_clk),
+	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon", &intcon_clk),
+	DEF_LOOKUP("intcon",    &intcon_clk),
-	DEF_LOOKUP("mspro", &mspro_clk),
+	DEF_LOOKUP("mspro",     &mspro_clk),
-	DEF_LOOKUP("pl172", &emif_clk),
+	DEF_LOOKUP("pl172",     &emif_clk),
 	/* FAST bridge clocks */
-	DEF_LOOKUP("fast", &fast_clk),
+	DEF_LOOKUP("fast",      &fast_clk),
-	DEF_LOOKUP("mmci", &mmcsd_clk),
+	DEF_LOOKUP("mmci",      &mmcsd_clk),
 	/*
 	 * The .0 and .1 identifiers on these comes from the platform device
 	 * .id field and are assigned when the platform devices are registered.
 	 */
-	DEF_LOOKUP("i2s.0", &i2s0_clk),
+	DEF_LOOKUP("i2s.0",     &i2s0_clk),
-	DEF_LOOKUP("i2s.1", &i2s1_clk),
+	DEF_LOOKUP("i2s.1",     &i2s1_clk),
-	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
+	DEF_LOOKUP("stu300.0",  &i2c0_clk),
-	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
+	DEF_LOOKUP("stu300.1",  &i2c1_clk),
-	DEF_LOOKUP("pl022", &spi_clk),
+	DEF_LOOKUP("pl022",     &spi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1", &uart1_clk),
+	DEF_LOOKUP("uart1",     &uart1_clk),
 #endif
 	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow", &slow_clk),
+	DEF_LOOKUP("slow",      &slow_clk),
-	DEF_LOOKUP("wdog", &wdog_clk),
+	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
-	DEF_LOOKUP("uart0", &uart_clk),
+	DEF_LOOKUP("uart0",     &uart_clk),
-	DEF_LOOKUP("apptimer", &app_timer_clk),
+	DEF_LOOKUP("apptimer",  &app_timer_clk),
-	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
 	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc0", &rtc_clk),
+	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
-	DEF_LOOKUP("bustr", &bustr_clk),
+	DEF_LOOKUP("bustr",     &bustr_clk),
-	DEF_LOOKUP("evhist", &evhist_clk),
+	DEF_LOOKUP("evhist",    &evhist_clk),
-	DEF_LOOKUP("timer", &timer_clk),
+	DEF_LOOKUP("timer",     &timer_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm", &ppm_clk),
+	DEF_LOOKUP("ppm",       &ppm_clk),
 #endif
 };
 
@@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = {
 	.release	= single_release,
 };
 
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
 {
 	/* Expose a simple debugfs interface to view all clocks */
 	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL, &u300_clocks_operations);
+				   NULL, NULL,
-}
+				   &u300_clocks_operations);
-#else
+	return 0;
-static inline void init_clk_read_procfs(void)
-{
 }
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
 #endif
 
 static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void)
 
 	clk_register();
 
-	init_clk_read_procfs();
-
 	/*
 	 * Some of these may be on when we boot the system so make sure they
 	 * are turned OFF.

arch/arm/mach-u300/core.c

@@ -455,8 +455,8 @@ void __init u300_init_irq(void)
 	for (i = 0; i < NR_IRQS; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
 	u300_enable_intcon_clock();
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }
 
 

arch/arm/mach-versatile/core.c

@@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = {
 
 static struct i2c_board_info versatile_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-		.type = "ds1338",
 	},
 };
 

arch/arm/mm/proc-syms.c

@@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
 EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
 #else
 EXPORT_SYMBOL(cpu_cache);

arch/arm/plat-mxc/include/mach/iomux-mx3.h

@@ -602,6 +602,8 @@ enum iomux_pins {
 #define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)

arch/arm/plat-pxa/gpio.c

@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <mach/gpio.h>
 
@@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
 	struct pxa_gpio_chip *chips;
 
-	/* this is early, we have to use bootmem allocator, and we really
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
-	 * want this to be allocated dynamically for different 'gpio_end'
-	 */
-	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
 	if (chips == NULL) {
 		pr_err("%s: failed to allocate GPIO chips\n", __func__);
 		return -ENOMEM;
 	}
 
-	memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
 	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
 		struct gpio_chip *c = &chips[i].chip;
 

arch/avr32/include/asm/pgalloc.h

@@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\

arch/avr32/include/asm/thread_info.h

@@ -40,7 +40,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
 	.cpu		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.restart_block	= {						\
 		.fn	= do_no_restart_syscall				\
 	}								\

arch/avr32/kernel/traps.c

@@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 
-	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
 	       str, err, ++die_counter);
+
+	printk(KERN_EMERG);
+
 #ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
+	printk(KERN_CONT "PREEMPT ");
 #endif
 #ifdef CONFIG_FRAME_POINTER
-	printk("FRAME_POINTER ");
+	printk(KERN_CONT "FRAME_POINTER ");
 #endif
 	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
 		unsigned long did = ocd_read(DID);
-		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+		printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
 		       (did >> 1) & 0x7ff,
 		       (did >> 12) & 0x7fff,
 		       (did >> 28) & 0xf);
 	} else {
-		printk("cpu: arch %u r%u / core %u r%u\n",
+		printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
 		       current_cpu_data.arch_type,
 		       current_cpu_data.arch_revision,
 		       current_cpu_data.cpu_type,

arch/blackfin/include/asm/context.S

@@ -223,9 +223,10 @@
 	[--sp] = RETN;
 	[--sp] = RETE;
 	[--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
+#ifdef CONFIG_DEBUG_KERNEL
-	r1.l = lo(IPEND);
+	p1.l = lo(IPEND);
-	r1.h = hi(IPEND);
+	p1.h = hi(IPEND);
+	r1 = [p1];
 	[--sp] = r1;
 #else
 	[--sp] = r0;	/* Skip IPEND as well. */

arch/blackfin/include/asm/cpu.h

@@ -32,7 +32,6 @@ struct blackfin_cpudata {
 	struct task_struct *idle;
 	unsigned int imemctl;
 	unsigned int dmemctl;
-	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
 	unsigned long icache_invld_count;
 };

arch/blackfin/include/asm/hardirq.h

@@ -6,6 +6,9 @@
 extern void ack_bad_irq(unsigned int irq);
 #define ack_bad_irq ack_bad_irq
 
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
 #include <asm-generic/hardirq.h>
 
 #endif

arch/blackfin/include/asm/processor.h

@@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void)
 	/* Always use CHIPID, to work around ANOMALY_05000234 */
 	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
-#ifdef CONFIG_BF52x
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
-	/* ANOMALY_05000357
+	/*
+	 * ANOMALY_05000364
 	 * Incorrect Revision Number in DSPID Register
 	 */
-	if (revid == 0)
+	if (ANOMALY_05000364 &&
-		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
+	    bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
-		case 0x0010:
+		revid = 1;
-			revid = 0;
-			break;
-		case 0x2796:
-			revid = 1;
-			break;
-		default:
-			revid = 0xFFFF;
-			break;
-		}
 #endif
+
 	return revid;
 }
 

arch/blackfin/include/asm/thread_info.h

@@ -77,7 +77,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count  = 1,                    \
+	.preempt_count  = INIT_PREEMPT_COUNT,   \
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 	BUG_ON(src % 4);
 	BUG_ON(size % 4);
 
+	src_ch = 0;
+	/* Find an avalible memDMA channel */
+	while (1) {
+		if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
+			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
+		}
+
+		if (!bfin_read16(&src_ch->cfg))
+			break;
+		else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+			bfin_write16(&src_ch->cfg, 0);
+			break;
+		}
+	}
+
 	/* Force a sync in case a previous config reset on this channel
 	 * occurred.  This is needed so subsequent writes to DMA registers
 	 * are not spuriously lost/corrupted.
 	 */
 	__builtin_bfin_ssync();
 
-	src_ch = 0;
-	/* Find an avalible memDMA channel */
-	while (1) {
-		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
-			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
-		} else {
-			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
-		}
-
-		if (!bfin_read16(&src_ch->cfg)) {
-			break;
-		} else {
-			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
-				bfin_write16(&src_ch->cfg, 0);
-		}
-
-	}
-
 	/* Destination */
 	bfin_write32(&dst_ch->start_addr, dst);
 	bfin_write16(&dst_ch->x_count, size >> 2);

arch/blackfin/kernel/bfin_gpio.c

@@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void)
 		*port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
 		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						& gpio_bank_saved[bank].dir;
 		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
 		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
 		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
 		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-						| gpio_bank_saved[bank].dir;
-
 		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
 	}
 	AWA_DUMMY_READ(maska);

arch/blackfin/kernel/cplb-nompu/cplbinit.c

@@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	}
 
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
-	if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+	if (cpu == 0) {
-		d_tbl[i_d].addr = L1_DATA_A_START;
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-		d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+			d_tbl[i_d].addr = L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
 	}
-	i_tbl[i_i].addr = L1_CODE_START;
+#ifdef CONFIG_SMP
-	i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	else {
-
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = COREB_L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	}
+#endif
 	first_switched_dcplb = i_d;
 	first_switched_icplb = i_i;
 

arch/blackfin/kernel/process.c

@@ -361,7 +361,7 @@ static inline
 int in_mem_const(unsigned long addr, unsigned long size,
                  unsigned long const_addr, unsigned long const_size)
 {
-	return in_mem_const_off(addr, 0, size, const_addr, const_size);
+	return in_mem_const_off(addr, size, 0, const_addr, const_size);
 }
 #define IN_ASYNC(bnum, bctlnum) \
 ({ \
@@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size)
 	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #endif
 	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size)
 	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return 1;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return 1;
 #endif
 	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))

arch/blackfin/kernel/ptrace.c

@@ -31,7 +31,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>

arch/blackfin/kernel/setup.c

@@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu)
 	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
 
 	cpudata->idle = current;
-	cpudata->loops_per_jiffy = loops_per_jiffy;
 	cpudata->imemctl = bfin_read_IMEM_CONTROL();
 	cpudata->dmemctl = bfin_read_DMEM_CONTROL();
 }
@@ -408,13 +407,14 @@ static void __init print_memory_map(char *who)
 			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
 		switch (bfin_memmap.map[i].type) {
 		case BFIN_MEMMAP_RAM:
-				printk("(usable)\n");
+			printk(KERN_CONT "(usable)\n");
-				break;
+			break;
 		case BFIN_MEMMAP_RESERVED:
-				printk("(reserved)\n");
+			printk(KERN_CONT "(reserved)\n");
-				break;
+			break;
-		default:	printk("type %lu\n", bfin_memmap.map[i].type);
+		default:
-				break;
+			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+			break;
 		}
 	}
 }
@@ -567,17 +567,23 @@ static __init void memory_setup(void)
 #  endif				/* ANOMALY_05000263 */
 # endif				/* CONFIG_ROMFS_FS */
 
-	memory_end -= mtd_size;
+	/* Since the default MTD_UCLINUX has no magic number, we just blindly
+	 * read 8 past the end of the kernel's image, and look at it.
+	 * When no image is attached, mtd_size is set to a random number
+	 * Do some basic sanity checks before operating on things
+	 */
+	if (mtd_size == 0 || memory_end <= mtd_size) {
+		pr_emerg("Could not find valid ram mtd attached.\n");
+	} else {
+		memory_end -= mtd_size;
 
-	if (mtd_size == 0) {
+		/* Relocate MTD image to the top of memory after the uncached memory area */
-		console_init();
+		uclinux_ram_map.phys = memory_mtd_start = memory_end;
-		panic("Don't boot kernel without rootfs attached.");
+		uclinux_ram_map.size = mtd_size;
+		pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+			_end, mtd_size, (void *)memory_mtd_start);
+		dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 	}
-
-	/* Relocate MTD image to the top of memory after the uncached memory area */
-	uclinux_ram_map.phys = memory_mtd_start = memory_end;
-	uclinux_ram_map.size = mtd_size;
-	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
@@ -614,19 +620,19 @@ static __init void memory_setup(void)
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
 	printk(KERN_INFO "Memory map:\n"
-		KERN_INFO "  fixedcode = 0x%p-0x%p\n"
+	       "  fixedcode = 0x%p-0x%p\n"
-		KERN_INFO "  text      = 0x%p-0x%p\n"
+	       "  text      = 0x%p-0x%p\n"
-		KERN_INFO "  rodata    = 0x%p-0x%p\n"
+	       "  rodata    = 0x%p-0x%p\n"
-		KERN_INFO "  bss       = 0x%p-0x%p\n"
+	       "  bss       = 0x%p-0x%p\n"
-		KERN_INFO "  data      = 0x%p-0x%p\n"
+	       "  data      = 0x%p-0x%p\n"
-		KERN_INFO "    stack   = 0x%p-0x%p\n"
+	       "    stack   = 0x%p-0x%p\n"
-		KERN_INFO "  init      = 0x%p-0x%p\n"
+	       "  init      = 0x%p-0x%p\n"
-		KERN_INFO "  available = 0x%p-0x%p\n"
+	       "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
-		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
+	       "  rootfs    = 0x%p-0x%p\n"
 #endif
 #if DMA_UNCACHED_REGION > 0
-		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
+	       "  DMA Zone  = 0x%p-0x%p\n"
 #endif
 		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
 		_stext, _etext,
@@ -859,20 +865,13 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	printk(KERN_INFO "Hardware Trace ");
 	if (bfin_read_TBUFCTL() & 0x1)
-		printk("Active ");
+		printk(KERN_CONT "Active ");
 	else
-		printk("Off ");
+		printk(KERN_CONT "Off ");
 	if (bfin_read_TBUFCTL() & 0x2)
-		printk("and Enabled\n");
+		printk(KERN_CONT "and Enabled\n");
 	else
-	printk("and Disabled\n");
+		printk(KERN_CONT "and Disabled\n");
-
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
-	/* we need to initialize the Flashrom device here since we might
-	 * do things with flash early on in the boot
-	 */
-	flash_probe();
-#endif
 
 	printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
 
@@ -937,10 +936,6 @@ void __init setup_arch(char **cmdline_p)
 			       CPU, bfin_revid());
 	}
 
-	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
-	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448");
-
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1163,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
 		"Calibration\t: %lu loops\n",
-		(cpudata->loops_per_jiffy * HZ) / 500000,
+		(loops_per_jiffy * HZ) / 500000,
-		((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
+		((loops_per_jiffy * HZ) / 5000) % 100,
-		(cpudata->loops_per_jiffy * HZ));
+		(loops_per_jiffy * HZ));
 
 	/* Check Cache configutation */
 	switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {

arch/blackfin/kernel/sys_bfin.c

@@ -29,7 +29,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>

arch/blackfin/kernel/traps.c

@@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+	printk(KERN_EMERG "Double Fault\n");
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
 		unsigned int cpu = smp_processor_id();
@@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	if (kernel_mode_regs(fp) || (current && !current->mm)) {
 		console_verbose();
 		oops_in_progress = 1;
-		if (strerror)
-			verbose_printk(strerror);
 	}
 
 	if (sig != SIGTRAP) {
+		if (strerror)
+			verbose_printk(strerror);
+
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -583,15 +584,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
 		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
 			verbose_printk(KERN_NOTICE "No trace since you do not have "
-				"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
+			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
-				KERN_NOTICE "\n");
 		else
 #endif
 			dump_bfin_trace_buffer();
 
 		if (oops_in_progress) {
 			/* Dump the current kernel stack */
-			verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			verbose_printk(KERN_NOTICE "Kernel Stack\n");
 			show_stack(current, NULL);
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
@@ -620,7 +620,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
-	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
  traps_done:
@@ -906,7 +908,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 
 			ret_addr = 0;
 			if (!j && i % 8 == 0)
-				printk("\n" KERN_NOTICE "%p:",addr);
+				printk(KERN_NOTICE "%p:",addr);
 
 			/* if it is an odd address, or zero, just skip it */
 			if (*addr & 0x1 || !*addr)
@@ -996,9 +998,9 @@ void dump_bfin_process(struct pt_regs *fp)
 
 		printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
 		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE  "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
+			verbose_printk(KERN_NOTICE
-				KERN_NOTICE " BSS = 0x%p-0x%p  USER-STACK = 0x%p\n"
+				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				KERN_NOTICE "\n",
+				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
 				(void *)current->mm->start_code,
 				(void *)current->mm->end_code,
 				(void *)current->mm->start_data,
@@ -1009,8 +1011,8 @@ void dump_bfin_process(struct pt_regs *fp)
 		else
 			verbose_printk(KERN_NOTICE "invalid mm\n");
 	} else
-		verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
+		verbose_printk(KERN_NOTICE
-		     "No Valid process in current context\n");
+			       "No Valid process in current context\n");
 #endif
 }
 
@@ -1028,7 +1030,7 @@ void dump_bfin_mem(struct pt_regs *fp)
 	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
 	     addr++) {
 		if (!((unsigned long)addr & 0xF))
-			verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+			verbose_printk(KERN_NOTICE "0x%p: ", addr);
 
 		if (!get_instruction(&val, addr)) {
 				val = 0;
@@ -1056,9 +1058,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 	    oops_in_progress)){
 		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
+		verbose_printk(KERN_NOTICE
-			KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
+"The remaining message may be meaningless\n"
-			 " better idea where it came from\n");
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
 #else
 		/* If we are handling only one peripheral interrupt
 		 * and current mm and pid are valid, and the last error
@@ -1114,9 +1116,10 @@ void show_regs(struct pt_regs *fp)
 
 	verbose_printk(KERN_NOTICE "%s", linux_banner);
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+		       print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, fp->syscfg);
+		       (long)fp->seqstat, fp->ipend, fp->syscfg);
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
 			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1187,7 @@ void show_regs(struct pt_regs *fp)
 		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
 	}
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
 	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
 		fp->r0, fp->r1, fp->r2, fp->r3);
 	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",

arch/blackfin/lib/lshrdi3.c

@@ -27,21 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#define BITS_PER_UNIT 8
+#include "gcclib.h"
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
-	SItype high, low;
-};
-
-typedef union {
-	struct DIstruct s;
-	DItype ll;
-} DIunion;
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf518/include/mach/anomaly.h

@@ -82,6 +82,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -117,6 +118,7 @@
 #define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)

arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf527/include/mach/anomaly.h

@@ -176,6 +176,8 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -201,6 +203,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -238,6 +241,5 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf533/boards/stamp.c

@@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf533/include/mach/anomaly.h

@@ -335,6 +335,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf537/boards/stamp.c

@@ -1313,10 +1313,10 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-		.irq = IRQ_PF5,
+		.irq = IRQ_PG5,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf537/include/mach/anomaly.h

@@ -167,6 +167,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -186,6 +187,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf538/include/mach/anomaly.h

@@ -137,6 +137,7 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -160,6 +161,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf548/include/mach/anomaly.h

@@ -195,6 +195,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -226,6 +227,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)

arch/blackfin/mach-bf561/include/mach/anomaly.h

@@ -288,6 +288,7 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf561/include/mach/mem_map.h

@@ -37,7 +37,6 @@
 
 /* Memory Map for ADSP-BF561 processors */
 
-#ifdef CONFIG_BF561
 #define COREA_L1_CODE_START       0xFFA00000
 #define COREA_L1_DATA_A_START     0xFF800000
 #define COREA_L1_DATA_B_START     0xFF900000
@@ -74,6 +73,28 @@
 #define BFIN_DCACHESIZE	(0*1024)
 #define BFIN_DSUPBANKS	0
 #endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A.  If we aren't, then we assume Core B is not
+ * using any cache.  This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler.  Easier to check one region than a
+ * bunch of small ones.  Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH     L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH   L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH   L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH     0x14000
+# define COREB_L1_DATA_A_LENGTH   0x8000
+# define COREB_L1_DATA_B_LENGTH   0x8000
 #endif
 
 /* Level 2 Memory */

arch/blackfin/mach-common/entry.S

@@ -218,7 +218,7 @@ ENTRY(_ex_single_step)
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);
 	syscfg = R7;
 	jump _ex_trap_c;
 
@@ -251,7 +251,7 @@ ENTRY(_ex_single_step)
 	if !cc jump _bfin_return_from_exception;
 
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);	/* Turn off single step */
 	syscfg = R7;
 
 	/* Fall through to _bfin_return_from_exception.  */
@@ -342,9 +342,11 @@ ENTRY(_ex_trap_c)
 	r6 = retx;
 	[p5 + PDA_RETX] = r6;
 #endif
+	/* Save the state of single stepping */
 	r6 = SYSCFG;
 	[p5 + PDA_SYSCFG] = r6;
-	BITCLR(r6, 0);
+	/* Clear it while we handle the exception in IRQ5 mode */
+	BITCLR(r6, SYSCFG_SSSTEP_P);
 	SYSCFG = r6;
 
 	/* Disable all interrupts, but make sure level 5 is enabled so
@@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c)
  * exception. This is a unrecoverable event, so crash.
  * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
  */
-_double_fault:
+ENTRY(_double_fault)
 	/* Turn caches & protection off, to ensure we don't get any more
 	 * double exceptions
 	 */
@@ -872,7 +874,7 @@ ENTRY(_ret_from_exception)
 	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
-	bitclr(r0, 0);
+	bitclr(r0, SYSCFG_SSSTEP_P);		/* Turn off single step */
 	syscfg = r0;
 5:
 	rts;

arch/blackfin/mach-common/smp.c

@@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 		return 0;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 	cpu_set(cpu, callmap);
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_RESCHEDULE;
@@ -314,6 +320,8 @@ void smp_send_stop(void)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_CPU_STOP;
@@ -450,7 +458,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	unsigned int cpu;
 
 	for_each_online_cpu(cpu)
-		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+		bogosum += loops_per_jiffy;
 
 	printk(KERN_INFO "SMP: Total of %d processors activated "
 	       "(%lu.%02lu BogoMIPS).\n",

arch/cris/include/asm/pgalloc.h

@@ -47,7 +47,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\

arch/cris/include/asm/thread_info.h

@@ -50,8 +50,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 #define INIT_THREAD_INFO(tsk)				\
@@ -60,7 +58,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,		\
 	.flags		= 0,				\
 	.cpu		= 0,				\
-	.preempt_count	= 1,				\
+	.preempt_count	= INIT_PREEMPT_COUNT,		\
 	.addr_limit	= KERNEL_DS,			\
 	.restart_block = {				\
 		       .fn = do_no_restart_syscall,	\

arch/cris/kernel/sys_cris.c

@@ -15,7 +15,6 @@
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>

arch/frv/include/asm/pgalloc.h

@@ -49,7 +49,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb),(pte));			\
@@ -62,7 +62,7 @@ do {							\
  */
 #define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *) 2); })
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
 
 #endif /* CONFIG_MMU */
 

arch/frv/include/asm/pgtable.h

@@ -225,7 +225,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)		NULL
 #define pud_free(mm, x)				do { } while (0)
-#define __pud_free_tlb(tlb, x)			do { } while (0)
+#define __pud_free_tlb(tlb, x, address)		do { } while (0)
 
 /*
  * The "pud_xxx()" functions here are trivial for a folded two-level

arch/frv/include/asm/thread_info.h

@@ -56,8 +56,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -67,7 +65,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\

arch/h8300/include/asm/thread_info.h

@@ -36,7 +36,7 @@ struct thread_info {
 	.exec_domain =	&default_exec_domain,	\
 	.flags =	0,			\
 	.cpu =		0,			\
-	.preempt_count = 1,			\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\

arch/ia64/include/asm/fpu.h

@@ -6,6 +6,8 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
+#include <linux/types.h>
+
 /* floating point status register: */
 #define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
 #define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */

arch/ia64/include/asm/pgalloc.h

@@ -48,7 +48,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 {
 	quicklist_free(0, NULL, pud);
 }
-#define __pud_free_tlb(tlb, pud)	pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, address)	pud_free((tlb)->mm, pud)
 #endif /* CONFIG_PGTABLE_4 */
 
 static inline void
@@ -67,7 +67,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	quicklist_free(0, NULL, pmd);
 }
 
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address)	pmd_free((tlb)->mm, pmd)
 
 static inline void
 pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
@@ -117,6 +117,6 @@ static inline void check_pgt_cache(void)
 	quicklist_trim(0, NULL, 25, 16);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
 
 #endif				/* _ASM_IA64_PGALLOC_H */