From 33c52b6718d2a6cb414440c98560818910d896dc Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Thu, 13 Jul 2017 13:45:11 -0500 Subject: [PATCH 01/11] net/mlx5e: Check for qos capability in dcbnl_initialize qos capability is the master capability bit that determines if the DCBX is supported for the PCI function. If this bit is off, driver cannot run any dcbx code. Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX") Signed-off-by: Huy Nguyen Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 2eb54d36e16e..810b51029c7f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -754,6 +754,9 @@ void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv) { struct mlx5e_dcbx *dcbx = &priv->dcbx; + if (!MLX5_CAP_GEN(priv->mdev, qos)) + return; + if (MLX5_CAP_GEN(priv->mdev, dcbx)) mlx5e_dcbnl_query_dcbx_mode(priv, &dcbx->mode); From 9e10bf1d349787f373484d835efe2dbb5f9c5614 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Mon, 10 Jul 2017 14:00:23 -0500 Subject: [PATCH 02/11] net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap. Current code doesn't report DCB_CAP_DCBX_HOST capability when query through getcap. User space lldptool expects capability to have HOST mode set when it wants to configure DCBX CEE mode. In absence of HOST mode capability, lldptool fails to switch to CEE mode. This fix returns DCB_CAP_DCBX_HOST capability when port's DCBX controlled mode is under software control. Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API") Signed-off-by: Huy Nguyen Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + .../ethernet/mellanox/mlx5/core/en_dcbnl.c | 21 +++++++++++-------- 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 0039b4725405..2f26fb34d741 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -263,6 +263,7 @@ struct mlx5e_dcbx { /* The only setting that cannot be read from FW */ u8 tc_tsa[IEEE_8021QAZ_MAX_TCS]; + u8 cap; }; #endif diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 810b51029c7f..c1d384fca4dc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -288,13 +288,8 @@ static int mlx5e_dcbnl_ieee_setpfc(struct net_device *dev, static u8 mlx5e_dcbnl_getdcbx(struct net_device *dev) { struct mlx5e_priv *priv = netdev_priv(dev); - struct mlx5e_dcbx *dcbx = &priv->dcbx; - u8 mode = DCB_CAP_DCBX_VER_IEEE | DCB_CAP_DCBX_VER_CEE; - if (dcbx->mode == MLX5E_DCBX_PARAM_VER_OPER_HOST) - mode |= DCB_CAP_DCBX_HOST; - - return mode; + return priv->dcbx.cap; } static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode) @@ -312,6 +307,7 @@ static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode) /* set dcbx to fw controlled */ if (!mlx5e_dcbnl_set_dcbx_mode(priv, MLX5E_DCBX_PARAM_VER_OPER_AUTO)) { dcbx->mode = MLX5E_DCBX_PARAM_VER_OPER_AUTO; + dcbx->cap &= ~DCB_CAP_DCBX_HOST; return 0; } @@ -324,6 +320,8 @@ static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode) if (mlx5e_dcbnl_switch_to_host_mode(netdev_priv(dev))) return 1; + dcbx->cap = mode; + return 0; } @@ -628,9 +626,9 @@ static u8 mlx5e_dcbnl_getcap(struct net_device *netdev, *cap = false; break; case DCB_CAP_ATTR_DCBX: - *cap = (DCB_CAP_DCBX_LLD_MANAGED | - DCB_CAP_DCBX_VER_CEE | - DCB_CAP_DCBX_STATIC); + *cap = priv->dcbx.cap | + DCB_CAP_DCBX_VER_CEE | + DCB_CAP_DCBX_VER_IEEE; break; default: *cap = 0; @@ -760,5 +758,10 @@ void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv) if (MLX5_CAP_GEN(priv->mdev, dcbx)) mlx5e_dcbnl_query_dcbx_mode(priv, &dcbx->mode); + priv->dcbx.cap = DCB_CAP_DCBX_VER_CEE | + DCB_CAP_DCBX_VER_IEEE; + if (priv->dcbx.mode == MLX5E_DCBX_PARAM_VER_OPER_HOST) + priv->dcbx.cap |= DCB_CAP_DCBX_HOST; + mlx5e_ets_init(priv); } From 672d0880b7798a917bcc622308f25a0fbb991dab Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sun, 30 Jul 2017 13:55:48 +0300 Subject: [PATCH 03/11] net/mlx5: Fix arm SRQ command for ISSI version 0 Support for ISSI version 0 was recently broken as the arm_srq_cmd command, which is used only for ISSI version 0, was given the opcode for ISSI version 1 instead of ISSI version 0. Change arm_srq_cmd to use the correct command opcode for ISSI version 0. Fixes: af1ba291c5e4 ('{net, IB}/mlx5: Refactor internal SRQ API') Signed-off-by: Noa Osherovich Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/srq.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/srq.c b/drivers/net/ethernet/mellanox/mlx5/core/srq.c index f774de6f5fcb..520f6382dfde 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/srq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/srq.c @@ -201,13 +201,13 @@ static int destroy_srq_cmd(struct mlx5_core_dev *dev, static int arm_srq_cmd(struct mlx5_core_dev *dev, struct mlx5_core_srq *srq, u16 lwm, int is_srq) { - /* arm_srq structs missing using identical xrc ones */ - u32 srq_in[MLX5_ST_SZ_DW(arm_xrc_srq_in)] = {0}; - u32 srq_out[MLX5_ST_SZ_DW(arm_xrc_srq_out)] = {0}; + u32 srq_in[MLX5_ST_SZ_DW(arm_rq_in)] = {0}; + u32 srq_out[MLX5_ST_SZ_DW(arm_rq_out)] = {0}; - MLX5_SET(arm_xrc_srq_in, srq_in, opcode, MLX5_CMD_OP_ARM_XRC_SRQ); - MLX5_SET(arm_xrc_srq_in, srq_in, xrc_srqn, srq->srqn); - MLX5_SET(arm_xrc_srq_in, srq_in, lwm, lwm); + MLX5_SET(arm_rq_in, srq_in, opcode, MLX5_CMD_OP_ARM_RQ); + MLX5_SET(arm_rq_in, srq_in, op_mod, MLX5_ARM_RQ_IN_OP_MOD_SRQ); + MLX5_SET(arm_rq_in, srq_in, srq_number, srq->srqn); + MLX5_SET(arm_rq_in, srq_in, lwm, lwm); return mlx5_cmd_exec(dev, srq_in, sizeof(srq_in), srq_out, sizeof(srq_out)); From b3cb5388499c5e219324bfe7da2e46cbad82bfcf Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Tue, 8 Aug 2017 13:17:00 -0500 Subject: [PATCH 04/11] net/mlx5: Skip mlx5_unload_one if mlx5_load_one fails There is an issue where the firmware fails during mlx5_load_one, the health_care timer detects the issue and schedules a health_care call. Then the mlx5_load_one detects the issue, cleans up and quits. Then the health_care starts and calls mlx5_unload_one to clean up the resources that no longer exist and causes kernel panic. The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set after mlx5_load_one fails. The solution is removing the bit MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN is redundant and we can use MLX5_INTERFACE_STATE_UP instead. Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback") Signed-off-by: Huy Nguyen Reviewed-by: Daniel Jurgens Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 4 +--- include/linux/mlx5/driver.h | 5 ++--- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index c065132b956d..4cdb414aa2d5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1186,7 +1186,6 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, } } - clear_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state); set_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state); out: mutex_unlock(&dev->intf_state_mutex); @@ -1261,7 +1260,7 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, mlx5_drain_health_recovery(dev); mutex_lock(&dev->intf_state_mutex); - if (test_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state)) { + if (!test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) { dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n", __func__); if (cleanup) @@ -1270,7 +1269,6 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, } clear_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state); - set_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state); if (mlx5_device_registered(dev)) mlx5_detach_device(dev); diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index df6ce59a1f95..918f5e644506 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -673,9 +673,8 @@ enum mlx5_device_state { }; enum mlx5_interface_state { - MLX5_INTERFACE_STATE_DOWN = BIT(0), - MLX5_INTERFACE_STATE_UP = BIT(1), - MLX5_INTERFACE_STATE_SHUTDOWN = BIT(2), + MLX5_INTERFACE_STATE_UP = BIT(0), + MLX5_INTERFACE_STATE_SHUTDOWN = BIT(1), }; enum mlx5_pci_status { From 10a8d00707082955b177164d4b4e758ffcbd4017 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Wed, 9 Aug 2017 10:03:40 -0500 Subject: [PATCH 05/11] net/mlx5: Remove the flag MLX5_INTERFACE_STATE_SHUTDOWN MLX5_INTERFACE_STATE_SHUTDOWN is not used in the code. Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback") Signed-off-by: Huy Nguyen Reviewed-by: Daniel Jurgens Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 -- include/linux/mlx5/driver.h | 1 - 2 files changed, 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 4cdb414aa2d5..16885827367b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1563,8 +1563,6 @@ static void shutdown(struct pci_dev *pdev) int err; dev_info(&pdev->dev, "Shutdown was called\n"); - /* Notify mlx5 clients that the kernel is being shut down */ - set_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &dev->intf_state); err = mlx5_try_fast_unload(dev); if (err) mlx5_unload_one(dev, priv, false); diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 918f5e644506..205d82d4c468 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -674,7 +674,6 @@ enum mlx5_device_state { enum mlx5_interface_state { MLX5_INTERFACE_STATE_UP = BIT(0), - MLX5_INTERFACE_STATE_SHUTDOWN = BIT(1), }; enum mlx5_pci_status { From 0556ce72ab16156af6c94cdc7964e4310acc97c0 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Wed, 16 Aug 2017 14:37:11 +0300 Subject: [PATCH 06/11] net/mlx5e: Fix dangling page pointer on DMA mapping error Function mlx5e_dealloc_rx_wqe is using page pointer value as an indication to valid DMA mapping. In case that the mapping failed, we released the page but kept the dangling pointer. Store the page pointer only after the DMA mapping passed to avoid invalid page DMA unmap. Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 325b2c8c1c6d..7344433259fc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -222,13 +222,13 @@ static inline int mlx5e_page_alloc_mapped(struct mlx5e_rq *rq, if (unlikely(!page)) return -ENOMEM; - dma_info->page = page; dma_info->addr = dma_map_page(rq->pdev, page, 0, RQ_PAGE_SIZE(rq), rq->buff.map_dir); if (unlikely(dma_mapping_error(rq->pdev, dma_info->addr))) { put_page(page); return -ENOMEM; } + dma_info->page = page; return 0; } From 5a8e12678c767ccf8bb16d6237569e4a707d655b Mon Sep 17 00:00:00 2001 From: Inbar Karmy Date: Mon, 14 Aug 2017 16:12:16 +0300 Subject: [PATCH 07/11] net/mlx5e: Don't override user RSS upon set channels Currently, increasing the number of combined channels is changing the RSS spread to use the new created channels. Prevent the RSS spread change in case the user explicitly declare it, to avoid overriding user configuration. Tested: when RSS default: # ethtool -L ens8 combined 4 RSS spread will change and point to 4 channels. # ethtool -X ens8 equal 4 # ethtool -L ens8 combined 6 RSS will not change after increasing the number of the channels. Fixes: 8bf368620486 ('ethtool: ensure channel counts are within bounds during SCHANNELS') Signed-off-by: Inbar Karmy Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 917fade5f5d5..f5594014715b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -641,8 +641,10 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv, new_channels.params = priv->channels.params; new_channels.params.num_channels = count; - mlx5e_build_default_indir_rqt(priv->mdev, new_channels.params.indirection_rqt, - MLX5E_INDIR_RQT_SIZE, count); + if (!netif_is_rxfh_configured(priv->netdev)) + mlx5e_build_default_indir_rqt(priv->mdev, + new_channels.params.indirection_rqt, + MLX5E_INDIR_RQT_SIZE, count); if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { priv->channels.params = new_channels.params; From 08820528c9d3ff0d0eda047d7ef5ecac2da1ef6c Mon Sep 17 00:00:00 2001 From: Paul Blakey Date: Tue, 22 Aug 2017 13:51:56 +0300 Subject: [PATCH 08/11] net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address Currently if vxlan tunnel ipv6 src isn't supplied the driver fails to resolve it as part of the route lookup. The resulting encap header is left with a zeroed out ipv6 src address so the packets are sent with this src ip. Use an appropriate route lookup API that also resolves the source ipv6 address if it's not supplied. Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels') Signed-off-by: Paul Blakey Reviewed-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 3c536f560dd2..7f282e8f4e7f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1443,12 +1443,10 @@ static int mlx5e_route_lookup_ipv6(struct mlx5e_priv *priv, struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; int ret; - dst = ip6_route_output(dev_net(mirred_dev), NULL, fl6); - ret = dst->error; - if (ret) { - dst_release(dst); + ret = ipv6_stub->ipv6_dst_lookup(dev_net(mirred_dev), NULL, &dst, + fl6); + if (ret < 0) return ret; - } *out_ttl = ip6_dst_hoplimit(dst); From 191220396db840822fc818edf03c49f0c02eb237 Mon Sep 17 00:00:00 2001 From: Shahar Klein Date: Tue, 1 Aug 2017 15:29:55 +0300 Subject: [PATCH 09/11] net/mlx5: E-Switch, Unload the representors in the correct order When changing from switchdev to legacy mode, all the representor port devices (uplink nic and reps) are cleaned up. Part of this cleaning process is removing the neigh entries and the hash table containing them. However, a representor neigh entry might be linked to the uplink port hash table and if the uplink nic is cleaned first the cleaning of the representor will end up in null deref. Fix that by unloading the representors in the opposite order of load. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Shahar Klein Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 95b64025ce36..5bc0593bd76e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -815,7 +815,7 @@ void esw_offloads_cleanup(struct mlx5_eswitch *esw, int nvports) struct mlx5_eswitch_rep *rep; int vport; - for (vport = 0; vport < nvports; vport++) { + for (vport = nvports - 1; vport >= 0; vport--) { rep = &esw->offloads.vport_reps[vport]; if (!rep->valid) continue; From 6aace17e64f4aa1c49802c46bd10688968b3787f Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Tue, 8 Aug 2017 15:56:37 +0300 Subject: [PATCH 10/11] net/mlx5e: Fix inline header size for small packets Fix inline header size, make sure it is not greater than skb len. This bug effects small packets, for example L2 packets with size < 18. Fixes: ae76715d153e ("net/mlx5e: Check the minimum inline header mode before xmit") Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index aaa0f4ebba9a..31353e5c3c78 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -128,10 +128,10 @@ static inline int mlx5e_skb_l3_header_offset(struct sk_buff *skb) return mlx5e_skb_l2_header_offset(skb); } -static inline unsigned int mlx5e_calc_min_inline(enum mlx5_inline_modes mode, - struct sk_buff *skb) +static inline u16 mlx5e_calc_min_inline(enum mlx5_inline_modes mode, + struct sk_buff *skb) { - int hlen; + u16 hlen; switch (mode) { case MLX5_INLINE_MODE_NONE: @@ -140,19 +140,22 @@ static inline unsigned int mlx5e_calc_min_inline(enum mlx5_inline_modes mode, hlen = eth_get_headlen(skb->data, skb_headlen(skb)); if (hlen == ETH_HLEN && !skb_vlan_tag_present(skb)) hlen += VLAN_HLEN; - return hlen; + break; case MLX5_INLINE_MODE_IP: /* When transport header is set to zero, it means no transport * header. When transport header is set to 0xff's, it means * transport header wasn't set. */ - if (skb_transport_offset(skb)) - return mlx5e_skb_l3_header_offset(skb); + if (skb_transport_offset(skb)) { + hlen = mlx5e_skb_l3_header_offset(skb); + break; + } /* fall through */ case MLX5_INLINE_MODE_L2: default: - return mlx5e_skb_l2_header_offset(skb); + hlen = mlx5e_skb_l2_header_offset(skb); } + return min_t(u16, hlen, skb->len); } static inline void mlx5e_tx_skb_pull_inline(unsigned char **skb_data, From 1213ad28f9595a08e3877248bbba1a25c40225d6 Mon Sep 17 00:00:00 2001 From: Tal Gilboa Date: Mon, 28 Aug 2017 18:45:08 +0300 Subject: [PATCH 11/11] net/mlx5e: Fix CQ moderation mode not set properly cq_period_mode assignment was mistakenly removed so it was always set to "0", which is EQE based moderation, regardless of the device CAPs and requested value in ethtool. Fixes: 6a9764efb255 ("net/mlx5e: Isolate open_channels from priv->params") Signed-off-by: Tal Gilboa Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 57f31fa478ce..6ad7f07e7861 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1969,6 +1969,7 @@ static void mlx5e_build_rx_cq_param(struct mlx5e_priv *priv, } mlx5e_build_common_cq_param(priv, param); + param->cq_period_mode = params->rx_cq_period_mode; } static void mlx5e_build_tx_cq_param(struct mlx5e_priv *priv,