openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  pciehp: fix error message about getting hotplug control
  pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2
  pci/irq: restore mask_bits in msi shutdown -v3
  doc: replace yet another dev with pdev for consistency in DMA-mapping.txt
  PCI: don't expose struct pci_vpd to userspace
  doc: fix an incorrect suggestion to pass NULL for PCI like buses
  Consistently use pdev as the variable of type struct pci_dev *.
  pciehp: Fix command write
  shpchp: fix slot name
  make pciehp_acpi_get_hp_hw_control_from_firmware()
  pciehp: Clean up pcie_init()
  pciehp: Mask hotplug interrupt at controller release
  pciehp: Remove useless hotplug interrupt enabling
  pciehp: Fix wrong slot capability check
  pciehp: Fix wrong slot control register access
  pciehp: Add missing memory barrier
  pciehp: Fix interrupt event handlig
  pciehp: fix slot name
  Update MAINTAINERS with location of PCI tree
  PCI: Add Intel SCH PCI IDs
  ...
This commit is contained in:
Linus Torvalds 2008-04-29 10:17:59 -07:00
parent 8f45c1a58a a53edac131
commit a217656cb2
13 changed files with 306 additions and 472 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
Documentation/DMA-mapping.txt
View File

@ -315,11 +315,11 @@ you should do:
dma_addr_t dma_handle;
cpu_addr = pci_alloc_consistent(dev, size, &dma_handle);
cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle);
where dev is a struct pci_dev *. You should pass NULL for PCI like buses
where devices don't have struct pci_dev (like ISA, EISA). This may be
called in interrupt context.
where pdev is a struct pci_dev *. This may be called in interrupt context.
You should use dma_alloc_coherent (see DMA-API.txt) for buses
where devices don't have struct pci_dev (like ISA, EISA).
This argument is needed because the DMA translations may be bus
specific (and often is private to the bus which the device is attached
@ -332,7 +332,7 @@ __get_free_pages (but takes size instead of a page order). If your
driver needs regions sized smaller than a page, you may prefer using
the pci_pool interface, described below.
The consistent DMA mapping interfaces, for non-NULL dev, will by
The consistent DMA mapping interfaces, for non-NULL pdev, will by
default return a DMA address which is SAC (Single Address Cycle)
addressable. Even if the device indicates (via PCI dma mask) that it
may address the upper 32-bits and thus perform DAC cycles, consistent
@ -354,9 +354,9 @@ buffer you receive will not cross a 64K boundary.
To unmap and free such a DMA region, you call:
pci_free_consistent(dev, size, cpu_addr, dma_handle);
pci_free_consistent(pdev, size, cpu_addr, dma_handle);
where dev, size are the same as in the above call and cpu_addr and
where pdev, size are the same as in the above call and cpu_addr and
dma_handle are the values pci_alloc_consistent returned to you.
This function may not be called in interrupt context.
@ -371,9 +371,9 @@ Create a pci_pool like this:
struct pci_pool *pool;
pool = pci_pool_create(name, dev, size, align, alloc);
pool = pci_pool_create(name, pdev, size, align, alloc);
The "name" is for diagnostics (like a kmem_cache name); dev and size
The "name" is for diagnostics (like a kmem_cache name); pdev and size
are as above. The device's hardware alignment requirement for this
type of data is "align" (which is expressed in bytes, and must be a
power of two). If your device has no boundary crossing restrictions,
@ -472,11 +472,11 @@ To map a single region, you do:
void *addr = buffer->ptr;
size_t size = buffer->len;
dma_handle = pci_map_single(dev, addr, size, direction);
dma_handle = pci_map_single(pdev, addr, size, direction);
and to unmap it:
pci_unmap_single(dev, dma_handle, size, direction);
pci_unmap_single(pdev, dma_handle, size, direction);
You should call pci_unmap_single when the DMA activity is finished, e.g.
from the interrupt which told you that the DMA transfer is done.
@ -493,17 +493,17 @@ Specifically:
unsigned long offset = buffer->offset;
size_t size = buffer->len;
dma_handle = pci_map_page(dev, page, offset, size, direction);
dma_handle = pci_map_page(pdev, page, offset, size, direction);
...
pci_unmap_page(dev, dma_handle, size, direction);
pci_unmap_page(pdev, dma_handle, size, direction);
Here, "offset" means byte offset within the given page.
With scatterlists, you map a region gathered from several regions by:
int i, count = pci_map_sg(dev, sglist, nents, direction);
int i, count = pci_map_sg(pdev, sglist, nents, direction);
struct scatterlist *sg;
for_each_sg(sglist, sg, count, i) {
@ -527,7 +527,7 @@ accessed sg->address and sg->length as shown above.
To unmap a scatterlist, just call:
pci_unmap_sg(dev, sglist, nents, direction);
pci_unmap_sg(pdev, sglist, nents, direction);
Again, make sure DMA activity has already finished.
@ -550,11 +550,11 @@ correct copy of the DMA buffer.
So, firstly, just map it with pci_map_{single,sg}, and after each DMA
transfer call either:
pci_dma_sync_single_for_cpu(dev, dma_handle, size, direction);
pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction);
or:
pci_dma_sync_sg_for_cpu(dev, sglist, nents, direction);
pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction);
as appropriate.
@ -562,7 +562,7 @@ Then, if you wish to let the device get at the DMA area again,
finish accessing the data with the cpu, and then before actually
giving the buffer to the hardware call either:
pci_dma_sync_single_for_device(dev, dma_handle, size, direction);
pci_dma_sync_single_for_device(pdev, dma_handle, size, direction);
or:
@ -739,7 +739,7 @@ failure can be determined by:
dma_addr_t dma_handle;
dma_handle = pci_map_single(dev, addr, size, direction);
dma_handle = pci_map_single(pdev, addr, size, direction);
if (pci_dma_mapping_error(dma_handle)) {
/*
* reduce current DMA mapping usage,

1
MAINTAINERS
View File

@ -3114,6 +3114,7 @@ P: Jesse Barnes
M: jbarnes@virtuousgeek.org
L: linux-kernel@vger.kernel.org
L: linux-pci@atrey.karlin.mff.cuni.cz
T: git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
S: Supported
PCI HOTPLUG CORE

17
drivers/pci/hotplug/pciehp.h
View File

@ -93,11 +93,10 @@ struct controller {
u8 slot_device_offset;
u32 first_slot; /* First physical slot number */ /* PCIE only has 1 slot */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
u8 ctrlcap;
u32 slot_cap;
u8 cap_base;
struct timer_list poll_timer;
volatile int cmd_busy;
spinlock_t lock;
};
#define INT_BUTTON_IGNORE 0
@ -137,13 +136,13 @@ struct controller {
#define HP_SUPR_RM_SUP 0x00000020
#define EMI_PRSN 0x00020000
#define ATTN_BUTTN(cap) (cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(cap) (cap & PWR_CTRL_PRSN)
#define MRL_SENS(cap) (cap & MRL_SENS_PRSN)
#define ATTN_LED(cap) (cap & ATTN_LED_PRSN)
#define PWR_LED(cap) (cap & PWR_LED_PRSN)
#define HP_SUPR_RM(cap) (cap & HP_SUPR_RM_SUP)
#define EMI(cap) (cap & EMI_PRSN)
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
#define MRL_SENS(ctrl) ((ctrl)->slot_cap & MRL_SENS_PRSN)
#define ATTN_LED(ctrl) ((ctrl)->slot_cap & ATTN_LED_PRSN)
#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
extern int pciehp_sysfs_enable_slot(struct slot *slot);
extern int pciehp_sysfs_disable_slot(struct slot *slot);

19
drivers/pci/hotplug/pciehp_core.c
View File

@ -41,6 +41,7 @@ int pciehp_debug;
int pciehp_poll_mode;
int pciehp_poll_time;
int pciehp_force;
int pciehp_slot_with_bus;
struct workqueue_struct *pciehp_wq;
#define DRIVER_VERSION "0.4"
@ -55,10 +56,12 @@ module_param(pciehp_debug, bool, 0644);
module_param(pciehp_poll_mode, bool, 0644);
module_param(pciehp_poll_time, int, 0644);
module_param(pciehp_force, bool, 0644);
module_param(pciehp_slot_with_bus, bool, 0644);
MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
MODULE_PARM_DESC(pciehp_slot_with_bus, "Use bus number in the slot name");
#define PCIE_MODULE_NAME "pciehp"
@ -193,8 +196,12 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
static void make_slot_name(struct slot *slot)
{
snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
slot->bus, slot->number);
if (pciehp_slot_with_bus)
snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
slot->bus, slot->number);
else
snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d",
slot->number);
}
static int init_slots(struct controller *ctrl)
@ -251,7 +258,7 @@ static int init_slots(struct controller *ctrl)
goto error_info;
}
/* create additional sysfs entries */
if (EMI(ctrl->ctrlcap)) {
if (EMI(ctrl)) {
retval = sysfs_create_file(&hotplug_slot->kobj,
&hotplug_slot_attr_lock.attr);
if (retval) {
@ -284,7 +291,7 @@ static void cleanup_slots(struct controller *ctrl)
list_for_each_safe(tmp, next, &ctrl->slot_list) {
slot = list_entry(tmp, struct slot, slot_list);
list_del(&slot->slot_list);
if (EMI(ctrl->ctrlcap))
if (EMI(ctrl))
sysfs_remove_file(&slot->hotplug_slot->kobj,
&hotplug_slot_attr_lock.attr);
cancel_delayed_work(&slot->work);
@ -305,7 +312,7 @@ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
hotplug_slot->info->attention_status = status;
if (ATTN_LED(slot->ctrl->ctrlcap))
if (ATTN_LED(slot->ctrl))
slot->hpc_ops->set_attention_status(slot, status);
return 0;
@ -472,7 +479,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
if (rc) /* -ENODEV: shouldn't happen, but deal with it */
value = 0;
}
if ((POWER_CTRL(ctrl->ctrlcap)) && !value) {
if ((POWER_CTRL(ctrl)) && !value) {
rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
if (rc)
goto err_out_free_ctrl_slot;

46
drivers/pci/hotplug/pciehp_ctrl.c
View File

@ -178,7 +178,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
static void set_slot_off(struct controller *ctrl, struct slot * pslot)
{
/* turn off slot, turn on Amber LED, turn off Green LED if supported*/
if (POWER_CTRL(ctrl->ctrlcap)) {
if (POWER_CTRL(ctrl)) {
if (pslot->hpc_ops->power_off_slot(pslot)) {
err("%s: Issue of Slot Power Off command failed\n",
__func__);
@ -186,10 +186,10 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot)
}
}
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
pslot->hpc_ops->green_led_off(pslot);
if (ATTN_LED(ctrl->ctrlcap)) {
if (ATTN_LED(ctrl)) {
if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
err("%s: Issue of Set Attention Led command failed\n",
__func__);
@ -214,14 +214,14 @@ static int board_added(struct slot *p_slot)
__func__, p_slot->device,
ctrl->slot_device_offset, p_slot->hp_slot);
if (POWER_CTRL(ctrl->ctrlcap)) {
if (POWER_CTRL(ctrl)) {
/* Power on slot */
retval = p_slot->hpc_ops->power_on_slot(p_slot);
if (retval)
return retval;
}
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
p_slot->hpc_ops->green_led_blink(p_slot);
/* Wait for ~1 second */
@ -254,7 +254,7 @@ static int board_added(struct slot *p_slot)
*/
if (pcie_mch_quirk)
pci_fixup_device(pci_fixup_final, ctrl->pci_dev);
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
p_slot->hpc_ops->green_led_on(p_slot);
return 0;
@ -279,7 +279,7 @@ static int remove_board(struct slot *p_slot)
dbg("In %s, hp_slot = %d\n", __func__, p_slot->hp_slot);
if (POWER_CTRL(ctrl->ctrlcap)) {
if (POWER_CTRL(ctrl)) {
/* power off slot */
retval = p_slot->hpc_ops->power_off_slot(p_slot);
if (retval) {
@ -289,7 +289,7 @@ static int remove_board(struct slot *p_slot)
}
}
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
/* turn off Green LED */
p_slot->hpc_ops->green_led_off(p_slot);
@ -327,7 +327,7 @@ static void pciehp_power_thread(struct work_struct *work)
case POWERON_STATE:
mutex_unlock(&p_slot->lock);
if (pciehp_enable_slot(p_slot) &&
PWR_LED(p_slot->ctrl->ctrlcap))
PWR_LED(p_slot->ctrl))
p_slot->hpc_ops->green_led_off(p_slot);
mutex_lock(&p_slot->lock);
p_slot->state = STATIC_STATE;
@ -409,9 +409,9 @@ static void handle_button_press_event(struct slot *p_slot)
"press.\n", p_slot->name);
}
/* blink green LED and turn off amber */
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
p_slot->hpc_ops->green_led_blink(p_slot);
if (ATTN_LED(ctrl->ctrlcap))
if (ATTN_LED(ctrl))
p_slot->hpc_ops->set_attention_status(p_slot, 0);
schedule_delayed_work(&p_slot->work, 5*HZ);
@ -427,13 +427,13 @@ static void handle_button_press_event(struct slot *p_slot)
dbg("%s: button cancel\n", __func__);
cancel_delayed_work(&p_slot->work);
if (p_slot->state == BLINKINGOFF_STATE) {
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
p_slot->hpc_ops->green_led_on(p_slot);
} else {
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
p_slot->hpc_ops->green_led_off(p_slot);
}
if (ATTN_LED(ctrl->ctrlcap))
if (ATTN_LED(ctrl))
p_slot->hpc_ops->set_attention_status(p_slot, 0);
info("PCI slot #%s - action canceled due to button press\n",
p_slot->name);
@ -492,16 +492,16 @@ static void interrupt_event_handler(struct work_struct *work)
handle_button_press_event(p_slot);
break;
case INT_POWER_FAULT:
if (!POWER_CTRL(ctrl->ctrlcap))
if (!POWER_CTRL(ctrl))
break;
if (ATTN_LED(ctrl->ctrlcap))
if (ATTN_LED(ctrl))
p_slot->hpc_ops->set_attention_status(p_slot, 1);
if (PWR_LED(ctrl->ctrlcap))
if (PWR_LED(ctrl))
p_slot->hpc_ops->green_led_off(p_slot);
break;
case INT_PRESENCE_ON:
case INT_PRESENCE_OFF:
if (!HP_SUPR_RM(ctrl->ctrlcap))
if (!HP_SUPR_RM(ctrl))
break;
dbg("Surprise Removal\n");
update_slot_info(p_slot);
@ -531,7 +531,7 @@ int pciehp_enable_slot(struct slot *p_slot)
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (MRL_SENS(p_slot->ctrl->ctrlcap)) {
if (MRL_SENS(p_slot->ctrl)) {
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: latch open on slot(%s)\n", __func__,
@ -541,7 +541,7 @@ int pciehp_enable_slot(struct slot *p_slot)
}
}
if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {
if (POWER_CTRL(p_slot->ctrl)) {
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: already enabled on slot(%s)\n", __func__,
@ -576,7 +576,7 @@ int pciehp_disable_slot(struct slot *p_slot)
/* Check to see if (latch closed, card present, power on) */
mutex_lock(&p_slot->ctrl->crit_sect);
if (!HP_SUPR_RM(p_slot->ctrl->ctrlcap)) {
if (!HP_SUPR_RM(p_slot->ctrl)) {
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (ret || !getstatus) {
info("%s: no adapter on slot(%s)\n", __func__,
@ -586,7 +586,7 @@ int pciehp_disable_slot(struct slot *p_slot)
}
}
if (MRL_SENS(p_slot->ctrl->ctrlcap)) {
if (MRL_SENS(p_slot->ctrl)) {
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
info("%s: latch open on slot(%s)\n", __func__,
@ -596,7 +596,7 @@ int pciehp_disable_slot(struct slot *p_slot)
}
}
if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {
if (POWER_CTRL(p_slot->ctrl)) {
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
info("%s: already disabled slot(%s)\n", __func__,

573
drivers/pci/hotplug/pciehp_hpc.c
View File

@ -221,6 +221,32 @@ static void start_int_poll_timer(struct controller *ctrl, int sec)
add_timer(&ctrl->poll_timer);
}
static inline int pciehp_request_irq(struct controller *ctrl)
{
int retval, irq = ctrl->pci_dev->irq;
/* Install interrupt polling timer. Start with 10 sec delay */
if (pciehp_poll_mode) {
init_timer(&ctrl->poll_timer);
start_int_poll_timer(ctrl, 10);
return 0;
}
/* Installs the interrupt handler */
retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl);
if (retval)
err("Cannot get irq %d for the hotplug controller\n", irq);
return retval;
}
static inline void pciehp_free_irq(struct controller *ctrl)
{
if (pciehp_poll_mode)
del_timer_sync(&ctrl->poll_timer);
else
free_irq(ctrl->pci_dev->irq, ctrl);
}
static inline int pcie_wait_cmd(struct controller *ctrl)
{
int retval = 0;
@ -242,17 +268,15 @@ static inline int pcie_wait_cmd(struct controller *ctrl)
/**
* pcie_write_cmd - Issue controller command
* @slot: slot to which the command is issued
* @ctrl: controller to which the command is issued
* @cmd: command value written to slot control register
* @mask: bitmask of slot control register to be modified
*/
static int pcie_write_cmd(struct slot *slot, u16 cmd, u16 mask)
static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
{
struct controller *ctrl = slot->ctrl;
int retval = 0;
u16 slot_status;
u16 slot_ctrl;
unsigned long flags;
mutex_lock(&ctrl->ctrl_lock);
@ -270,24 +294,24 @@ static int pcie_write_cmd(struct slot *slot, u16 cmd, u16 mask)
__func__);
}
spin_lock_irqsave(&ctrl->lock, flags);
retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (retval) {
err("%s: Cannot read SLOTCTRL register\n", __func__);
goto out_spin_unlock;
goto out;
}
slot_ctrl &= ~mask;
slot_ctrl |= ((cmd & mask) | CMD_CMPL_INTR_ENABLE);
slot_ctrl |= (cmd & mask);
/* Don't enable command completed if caller is changing it. */
if (!(mask & CMD_CMPL_INTR_ENABLE))
slot_ctrl |= CMD_CMPL_INTR_ENABLE;
ctrl->cmd_busy = 1;
smp_mb();
retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
if (retval)
err("%s: Cannot write to SLOTCTRL register\n", __func__);
out_spin_unlock:
spin_unlock_irqrestore(&ctrl->lock, flags);
/*
* Wait for command completion.
*/
@ -467,12 +491,7 @@ static int hpc_toggle_emi(struct slot *slot)
slot_cmd = EMI_CTRL;
cmd_mask = EMI_CTRL;
if (!pciehp_poll_mode) {
slot_cmd = slot_cmd | HP_INTR_ENABLE;
cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
rc = pcie_write_cmd(slot->ctrl, slot_cmd, cmd_mask);
slot->last_emi_toggle = get_seconds();
return rc;
@ -499,12 +518,7 @@ static int hpc_set_attention_status(struct slot *slot, u8 value)
default:
return -1;
}
if (!pciehp_poll_mode) {
slot_cmd = slot_cmd | HP_INTR_ENABLE;
cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
rc = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@ -519,13 +533,7 @@ static void hpc_set_green_led_on(struct slot *slot)
slot_cmd = 0x0100;
cmd_mask = PWR_LED_CTRL;
if (!pciehp_poll_mode) {
slot_cmd = slot_cmd | HP_INTR_ENABLE;
cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
pcie_write_cmd(slot, slot_cmd, cmd_mask);
pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
}
@ -538,12 +546,7 @@ static void hpc_set_green_led_off(struct slot *slot)
slot_cmd = 0x0300;
cmd_mask = PWR_LED_CTRL;
if (!pciehp_poll_mode) {
slot_cmd = slot_cmd | HP_INTR_ENABLE;
cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
pcie_write_cmd(slot, slot_cmd, cmd_mask);
pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
}
@ -556,23 +559,19 @@ static void hpc_set_green_led_blink(struct slot *slot)
slot_cmd = 0x0200;
cmd_mask = PWR_LED_CTRL;
if (!pciehp_poll_mode) {
slot_cmd = slot_cmd | HP_INTR_ENABLE;
cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
pcie_write_cmd(slot, slot_cmd, cmd_mask);
pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
}
static void hpc_release_ctlr(struct controller *ctrl)
{
if (pciehp_poll_mode)
del_timer(&ctrl->poll_timer);
else
free_irq(ctrl->pci_dev->irq, ctrl);
/* Mask Hot-plug Interrupt Enable */
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE))
err("%s: Cannot mask hotplut interrupt enable\n", __func__);
/* Free interrupt handler or interrupt polling timer */
pciehp_free_irq(ctrl);
/*
* If this is the last controller to be released, destroy the
@ -612,19 +611,13 @@ static int hpc_power_on_slot(struct slot * slot)
cmd_mask = PWR_CTRL;
/* Enable detection that we turned off at slot power-off time */
if (!pciehp_poll_mode) {
slot_cmd = slot_cmd |
PWR_FAULT_DETECT_ENABLE |
MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE |
HP_INTR_ENABLE;
cmd_mask = cmd_mask |
PWR_FAULT_DETECT_ENABLE |
MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE |
HP_INTR_ENABLE;
slot_cmd |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE);
cmd_mask |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE);
}
retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write %x command failed!\n", __func__, slot_cmd);
@ -697,18 +690,13 @@ static int hpc_power_off_slot(struct slot * slot)
* till the slot is powered on again.
*/
if (!pciehp_poll_mode) {
slot_cmd = (slot_cmd &
~PWR_FAULT_DETECT_ENABLE &
~MRL_DETECT_ENABLE &
~PRSN_DETECT_ENABLE) | HP_INTR_ENABLE;
cmd_mask = cmd_mask |
PWR_FAULT_DETECT_ENABLE |
MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE |
HP_INTR_ENABLE;
slot_cmd &= ~(PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE);
cmd_mask |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE);
}
retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write command failed!\n", __func__);
retval = -1;
@ -733,139 +721,56 @@ static int hpc_power_off_slot(struct slot * slot)
static irqreturn_t pcie_isr(int irq, void *dev_id)
{
struct controller *ctrl = (struct controller *)dev_id;
u16 slot_status, intr_detect, intr_loc;
u16 temp_word;
int hp_slot = 0; /* only 1 slot per PCI Express port */
int rc = 0;
unsigned long flags;
u16 detected, intr_loc;
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
err("%s: Cannot read SLOTSTATUS register\n", __func__);
return IRQ_NONE;
}
intr_detect = (ATTN_BUTTN_PRESSED | PWR_FAULT_DETECTED |
MRL_SENS_CHANGED | PRSN_DETECT_CHANGED | CMD_COMPLETED);
intr_loc = slot_status & intr_detect;
/* Check to see if it was our interrupt */
if ( !intr_loc )
return IRQ_NONE;
dbg("%s: intr_loc %x\n", __func__, intr_loc);
/* Mask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
spin_lock_irqsave(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOT_CTRL register\n",
__func__);
spin_unlock_irqrestore(&ctrl->lock, flags);
/*
* In order to guarantee that all interrupt events are
* serviced, we need to re-inspect Slot Status register after
* clearing what is presumed to be the last pending interrupt.
*/
intr_loc = 0;
do {
if (pciehp_readw(ctrl, SLOTSTATUS, &detected)) {
err("%s: Cannot read SLOTSTATUS\n", __func__);
return IRQ_NONE;
}
dbg("%s: pciehp_readw(SLOTCTRL) with value %x\n",
__func__, temp_word);
temp_word = (temp_word & ~HP_INTR_ENABLE &
~CMD_CMPL_INTR_ENABLE) | 0x00;
rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n",
__func__);
spin_unlock_irqrestore(&ctrl->lock, flags);
detected &= (ATTN_BUTTN_PRESSED | PWR_FAULT_DETECTED |
MRL_SENS_CHANGED | PRSN_DETECT_CHANGED |
CMD_COMPLETED);
intr_loc |= detected;
if (!intr_loc)
return IRQ_NONE;
if (pciehp_writew(ctrl, SLOTSTATUS, detected)) {
err("%s: Cannot write to SLOTSTATUS\n", __func__);
return IRQ_NONE;
}
spin_unlock_irqrestore(&ctrl->lock, flags);
} while (detected);
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
err("%s: Cannot read SLOT_STATUS register\n",
__func__);
return IRQ_NONE;
}
dbg("%s: pciehp_readw(SLOTSTATUS) with value %x\n",
__func__, slot_status);
/* Clear command complete interrupt caused by this write */
temp_word = 0x1f;
rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
err("%s: Cannot write to SLOTSTATUS register\n",
__func__);
return IRQ_NONE;
}
}
dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);
/* Check Command Complete Interrupt Pending */
if (intr_loc & CMD_COMPLETED) {
/*
* Command Complete Interrupt Pending
*/
ctrl->cmd_busy = 0;
smp_mb();
wake_up_interruptible(&ctrl->queue);
}
/* Check MRL Sensor Changed */
if (intr_loc & MRL_SENS_CHANGED)
pciehp_handle_switch_change(hp_slot, ctrl);
pciehp_handle_switch_change(0, ctrl);
/* Check Attention Button Pressed */
if (intr_loc & ATTN_BUTTN_PRESSED)
pciehp_handle_attention_button(hp_slot, ctrl);
pciehp_handle_attention_button(0, ctrl);
/* Check Presence Detect Changed */
if (intr_loc & PRSN_DETECT_CHANGED)
pciehp_handle_presence_change(hp_slot, ctrl);
pciehp_handle_presence_change(0, ctrl);
/* Check Power Fault Detected */
if (intr_loc & PWR_FAULT_DETECTED)
pciehp_handle_power_fault(hp_slot, ctrl);
/* Clear all events after serving them */
temp_word = 0x1F;
rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
err("%s: Cannot write to SLOTSTATUS register\n", __func__);
return IRQ_NONE;
}
/* Unmask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
spin_lock_irqsave(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOTCTRL register\n",
__func__);
spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
dbg("%s: Unmask Hot-plug Interrupt Enable\n", __func__);
temp_word = (temp_word & ~HP_INTR_ENABLE) | HP_INTR_ENABLE;
rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n",
__func__);
spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
spin_unlock_irqrestore(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
err("%s: Cannot read SLOT_STATUS register\n",
__func__);
return IRQ_NONE;
}
/* Clear command complete interrupt caused by this write */
temp_word = 0x1F;
rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
err("%s: Cannot write to SLOTSTATUS failed\n",
__func__);
return IRQ_NONE;
}
dbg("%s: pciehp_writew(SLOTSTATUS) with value %x\n",
__func__, temp_word);
}
pciehp_handle_power_fault(0, ctrl);
return IRQ_HANDLED;
}
@ -1052,7 +957,7 @@ static struct hpc_ops pciehp_hpc_ops = {
};
#ifdef CONFIG_ACPI
int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
{
acpi_status status;
acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
@ -1112,7 +1017,7 @@ int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
break;
}
err("Cannot get control of hotplug hardware for pci %s\n",
dbg("Cannot get control of hotplug hardware for pci %s\n",
pci_name(dev));
kfree(string.pointer);
@ -1123,45 +1028,9 @@ int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
static int pcie_init_hardware_part1(struct controller *ctrl,
struct pcie_device *dev)
{
int rc;
u16 temp_word;
u32 slot_cap;
u16 slot_status;
rc = pciehp_readl(ctrl, SLOTCAP, &slot_cap);
if (rc) {
err("%s: Cannot read SLOTCAP register\n", __func__);
return -1;
}
/* Mask Hot-plug Interrupt Enable */
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOTCTRL register\n", __func__);
return -1;
}
dbg("%s: SLOTCTRL %x value read %x\n",
__func__, ctrl->cap_base + SLOTCTRL, temp_word);
temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) |
0x00;
rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n", __func__);
return -1;
}
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
err("%s: Cannot read SLOTSTATUS register\n", __func__);
return -1;
}
temp_word = 0x1F; /* Clear all events */
rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
err("%s: Cannot write to SLOTSTATUS register\n", __func__);
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
err("%s: Cannot mask hotplug interrupt enable\n", __func__);
return -1;
}
return 0;
@ -1169,205 +1038,125 @@ static int pcie_init_hardware_part1(struct controller *ctrl,
int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
{
int rc;
u16 temp_word;
u16 intr_enable = 0;
u32 slot_cap;
u16 slot_status;
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOTCTRL register\n", __func__);
goto abort;
}
intr_enable = intr_enable | PRSN_DETECT_ENABLE;
rc = pciehp_readl(ctrl, SLOTCAP, &slot_cap);
if (rc) {
err("%s: Cannot read SLOTCAP register\n", __func__);
goto abort;
}
if (ATTN_BUTTN(slot_cap))
intr_enable = intr_enable | ATTN_BUTTN_ENABLE;
if (POWER_CTRL(slot_cap))
intr_enable = intr_enable | PWR_FAULT_DETECT_ENABLE;
if (MRL_SENS(slot_cap))
intr_enable = intr_enable | MRL_DETECT_ENABLE;
temp_word = (temp_word & ~intr_enable) | intr_enable;
if (pciehp_poll_mode) {
temp_word = (temp_word & ~HP_INTR_ENABLE) | 0x0;
} else {
temp_word = (temp_word & ~HP_INTR_ENABLE) | HP_INTR_ENABLE;
}
u16 cmd, mask;
/*
* Unmask Hot-plug Interrupt Enable for the interrupt
* notification mechanism case.
* We need to clear all events before enabling hotplug interrupt
* notification mechanism in order for hotplug controler to
* generate interrupts.
*/
rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n", __func__);
if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
return -1;
}
cmd = PRSN_DETECT_ENABLE;
if (ATTN_BUTTN(ctrl))
cmd |= ATTN_BUTTN_ENABLE;
if (POWER_CTRL(ctrl))
cmd |= PWR_FAULT_DETECT_ENABLE;
if (MRL_SENS(ctrl))
cmd |= MRL_DETECT_ENABLE;
if (!pciehp_poll_mode)
cmd |= HP_INTR_ENABLE;
mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE |
PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | HP_INTR_ENABLE;
if (pcie_write_cmd(ctrl, cmd, mask)) {
err("%s: Cannot enable software notification\n", __func__);
goto abort;
}
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
err("%s: Cannot read SLOTSTATUS register\n", __func__);
goto abort_disable_intr;
}
temp_word = 0x1F; /* Clear all events */
rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
err("%s: Cannot write to SLOTSTATUS register\n", __func__);
goto abort_disable_intr;
}
if (pciehp_force) {
if (pciehp_force)
dbg("Bypassing BIOS check for pciehp use on %s\n",
pci_name(ctrl->pci_dev));
} else {
rc = pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev);
if (rc)
goto abort_disable_intr;
}
else if (pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev))
goto abort_disable_intr;
return 0;
/* We end up here for the many possible ways to fail this API. */
abort_disable_intr:
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (!rc) {
temp_word &= ~(intr_enable | HP_INTR_ENABLE);
rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
}
if (rc)
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE))
err("%s : disabling interrupts failed\n", __func__);
abort:
return -1;
}
static inline void dbg_ctrl(struct controller *ctrl)
{
int i;
u16 reg16;
struct pci_dev *pdev = ctrl->pci_dev;
if (!pciehp_debug)
return;
dbg("Hotplug Controller:\n");
dbg(" Seg/Bus/Dev/Func/IRQ : %s IRQ %d\n", pci_name(pdev), pdev->irq);
dbg(" Vendor ID : 0x%04x\n", pdev->vendor);
dbg(" Device ID : 0x%04x\n", pdev->device);
dbg(" Subsystem ID : 0x%04x\n", pdev->subsystem_device);
dbg(" Subsystem Vendor ID : 0x%04x\n", pdev->subsystem_vendor);
dbg(" PCIe Cap offset : 0x%02x\n", ctrl->cap_base);
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
if (!pci_resource_len(pdev, i))
continue;
dbg(" PCI resource [%d] : 0x%llx@0x%llx\n", i,
(unsigned long long)pci_resource_len(pdev, i),
(unsigned long long)pci_resource_start(pdev, i));
}
dbg("Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
dbg(" Physical Slot Number : %d\n", ctrl->first_slot);
dbg(" Attention Button : %3s\n", ATTN_BUTTN(ctrl) ? "yes" : "no");
dbg(" Power Controller : %3s\n", POWER_CTRL(ctrl) ? "yes" : "no");
dbg(" MRL Sensor : %3s\n", MRL_SENS(ctrl) ? "yes" : "no");
dbg(" Attention Indicator : %3s\n", ATTN_LED(ctrl) ? "yes" : "no");
dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no");
dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no");
pciehp_readw(ctrl, SLOTSTATUS, &reg16);
dbg("Slot Status : 0x%04x\n", reg16);
pciehp_readw(ctrl, SLOTSTATUS, &reg16);
dbg("Slot Control : 0x%04x\n", reg16);
}
int pcie_init(struct controller *ctrl, struct pcie_device *dev)
{
int rc;
u16 cap_reg;
u32 slot_cap;
int cap_base;
u16 slot_status, slot_ctrl;
struct pci_dev *pdev;
struct pci_dev *pdev = dev->port;
pdev = dev->port;
ctrl->pci_dev = pdev; /* save pci_dev in context */
dbg("%s: hotplug controller vendor id 0x%x device id 0x%x\n",
__func__, pdev->vendor, pdev->device);
cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (cap_base == 0) {
dbg("%s: Can't find PCI_CAP_ID_EXP (0x10)\n", __func__);
ctrl->pci_dev = pdev;
ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!ctrl->cap_base) {
err("%s: Cannot find PCI Express capability\n", __func__);
goto abort;
}
ctrl->cap_base = cap_base;
dbg("%s: pcie_cap_base %x\n", __func__, cap_base);
rc = pciehp_readw(ctrl, CAPREG, &cap_reg);
if (rc) {
err("%s: Cannot read CAPREG register\n", __func__);
goto abort;
}
dbg("%s: CAPREG offset %x cap_reg %x\n",
__func__, ctrl->cap_base + CAPREG, cap_reg);
if (((cap_reg & SLOT_IMPL) == 0) ||
(((cap_reg & DEV_PORT_TYPE) != 0x0040)
&& ((cap_reg & DEV_PORT_TYPE) != 0x0060))) {
dbg("%s : This is not a root port or the port is not "
"connected to a slot\n", __func__);
goto abort;
}
rc = pciehp_readl(ctrl, SLOTCAP, &slot_cap);
if (rc) {
if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) {
err("%s: Cannot read SLOTCAP register\n", __func__);
goto abort;
}
dbg("%s: SLOTCAP offset %x slot_cap %x\n",
__func__, ctrl->cap_base + SLOTCAP, slot_cap);
if (!(slot_cap & HP_CAP)) {
dbg("%s : This slot is not hot-plug capable\n", __func__);
goto abort;
}
/* For debugging purpose */
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
err("%s: Cannot read SLOTSTATUS register\n", __func__);
goto abort;
}
dbg("%s: SLOTSTATUS offset %x slot_status %x\n",
__func__, ctrl->cap_base + SLOTSTATUS, slot_status);
rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (rc) {
err("%s: Cannot read SLOTCTRL register\n", __func__);
goto abort;
}
dbg("%s: SLOTCTRL offset %x slot_ctrl %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_ctrl);
for (rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
if (pci_resource_len(pdev, rc) > 0)
dbg("pci resource[%d] start=0x%llx(len=0x%llx)\n", rc,
(unsigned long long)pci_resource_start(pdev, rc),
(unsigned long long)pci_resource_len(pdev, rc));
ctrl->slot_cap = slot_cap;
ctrl->first_slot = slot_cap >> 19;
ctrl->slot_device_offset = 0;
ctrl->num_slots = 1;
ctrl->hpc_ops = &pciehp_hpc_ops;
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->ctrl_lock);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
pdev->vendor, pdev->device,
pdev->subsystem_vendor, pdev->subsystem_device);
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->ctrl_lock);
spin_lock_init(&ctrl->lock);
/* setup wait queue */
init_waitqueue_head(&ctrl->queue);
/* return PCI Controller Info */
ctrl->slot_device_offset = 0;
ctrl->num_slots = 1;
ctrl->first_slot = slot_cap >> 19;
ctrl->ctrlcap = slot_cap & 0x0000007f;
rc = pcie_init_hardware_part1(ctrl, dev);
if (rc)
if (pcie_init_hardware_part1(ctrl, dev))
goto abort;
if (pciehp_poll_mode) {
/* Install interrupt polling timer. Start with 10 sec delay */
init_timer(&ctrl->poll_timer);
start_int_poll_timer(ctrl, 10);
} else {
/* Installs the interrupt handler */
rc = request_irq(ctrl->pci_dev->irq, pcie_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n",
__func__, ctrl->pci_dev->irq,
atomic_read(&pciehp_num_controllers), rc);
if (rc) {
err("Can't get irq %d for the hotplug controller\n",
ctrl->pci_dev->irq);
goto abort;
}
}
dbg("pciehp ctrl b:d:f:irq=0x%x:%x:%x:%x\n", pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), dev->irq);
if (pciehp_request_irq(ctrl))
goto abort;
/*
* If this is the first controller to be initialized,
@ -1376,21 +1165,17 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev)
if (atomic_add_return(1, &pciehp_num_controllers) == 1) {
pciehp_wq = create_singlethread_workqueue("pciehpd");
if (!pciehp_wq) {
rc = -ENOMEM;
goto abort_free_irq;
}
}
rc = pcie_init_hardware_part2(ctrl, dev);
if (rc == 0) {
ctrl->hpc_ops = &pciehp_hpc_ops;
return 0;
}
if (pcie_init_hardware_part2(ctrl, dev))
goto abort_free_irq;
return 0;
abort_free_irq:
if (pciehp_poll_mode)
del_timer_sync(&ctrl->poll_timer);
else
free_irq(ctrl->pci_dev->irq, ctrl);
pciehp_free_irq(ctrl);
abort:
return -1;
}

11
drivers/pci/hotplug/shpchp_core.c
View File

@ -39,6 +39,7 @@
int shpchp_debug;
int shpchp_poll_mode;
int shpchp_poll_time;
int shpchp_slot_with_bus;
struct workqueue_struct *shpchp_wq;
#define DRIVER_VERSION "0.4"
@ -52,9 +53,11 @@ MODULE_LICENSE("GPL");
module_param(shpchp_debug, bool, 0644);
module_param(shpchp_poll_mode, bool, 0644);
module_param(shpchp_poll_time, int, 0644);
module_param(shpchp_slot_with_bus, bool, 0644);
MODULE_PARM_DESC(shpchp_debug, "Debugging mode enabled or not");
MODULE_PARM_DESC(shpchp_poll_mode, "Using polling mechanism for hot-plug events or not");
MODULE_PARM_DESC(shpchp_poll_time, "Polling mechanism frequency, in seconds");
MODULE_PARM_DESC(shpchp_slot_with_bus, "Use bus number in the slot name");
#define SHPC_MODULE_NAME "shpchp"
@ -100,8 +103,12 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
static void make_slot_name(struct slot *slot)
{
snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
slot->bus, slot->number);
if (shpchp_slot_with_bus)
snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
slot->bus, slot->number);
else
snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d",
slot->number);
}
static int init_slots(struct controller *ctrl)

56
drivers/pci/msi.c
View File

@ -123,7 +123,7 @@ static void msix_flush_writes(unsigned int irq)
}
}
static void msi_set_mask_bit(unsigned int irq, int flag)
static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
{
struct msi_desc *entry;
@ -137,8 +137,8 @@ static void msi_set_mask_bit(unsigned int irq, int flag)
pos = (long)entry->mask_base;
pci_read_config_dword(entry->dev, pos, &mask_bits);
mask_bits &= ~(1);
mask_bits |= flag;
mask_bits &= ~(mask);
mask_bits |= flag & mask;
pci_write_config_dword(entry->dev, pos, mask_bits);
} else {
msi_set_enable(entry->dev, !flag);
@ -241,13 +241,13 @@ void write_msi_msg(unsigned int irq, struct msi_msg *msg)
void mask_msi_irq(unsigned int irq)
{
msi_set_mask_bit(irq, 1);
msi_set_mask_bits(irq, 1, 1);
msix_flush_writes(irq);
}
void unmask_msi_irq(unsigned int irq)
{
msi_set_mask_bit(irq, 0);
msi_set_mask_bits(irq, 1, 0);
msix_flush_writes(irq);
}
@ -291,7 +291,8 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
msi_set_enable(dev, 0);
write_msi_msg(dev->irq, &entry->msg);
if (entry->msi_attrib.maskbit)
msi_set_mask_bit(dev->irq, entry->msi_attrib.masked);
msi_set_mask_bits(dev->irq, entry->msi_attrib.maskbits_mask,
entry->msi_attrib.masked);
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
control &= ~(PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
@ -315,7 +316,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
list_for_each_entry(entry, &dev->msi_list, list) {
write_msi_msg(entry->irq, &entry->msg);
msi_set_mask_bit(entry->irq, entry->msi_attrib.masked);
msi_set_mask_bits(entry->irq, 1, entry->msi_attrib.masked);
}
BUG_ON(list_empty(&dev->msi_list));
@ -382,6 +383,7 @@ static int msi_capability_init(struct pci_dev *dev)
pci_write_config_dword(dev,
msi_mask_bits_reg(pos, is_64bit_address(control)),
maskbits);
entry->msi_attrib.maskbits_mask = temp;
}
list_add_tail(&entry->list, &dev->msi_list);
@ -569,10 +571,9 @@ int pci_enable_msi(struct pci_dev* dev)
}
EXPORT_SYMBOL(pci_enable_msi);
void pci_disable_msi(struct pci_dev* dev)
void pci_msi_shutdown(struct pci_dev* dev)
{
struct msi_desc *entry;
int default_irq;
if (!pci_msi_enable || !dev || !dev->msi_enabled)
return;
@ -583,15 +584,31 @@ void pci_disable_msi(struct pci_dev* dev)
BUG_ON(list_empty(&dev->msi_list));
entry = list_entry(dev->msi_list.next, struct msi_desc, list);
if (!entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) {
return;
/* Return the the pci reset with msi irqs unmasked */
if (entry->msi_attrib.maskbit) {
u32 mask = entry->msi_attrib.maskbits_mask;
msi_set_mask_bits(dev->irq, mask, ~mask);
}
default_irq = entry->msi_attrib.default_irq;
msi_free_irqs(dev);
if (!entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI)
return;
/* Restore dev->irq to its default pin-assertion irq */
dev->irq = default_irq;
dev->irq = entry->msi_attrib.default_irq;
}
void pci_disable_msi(struct pci_dev* dev)
{
struct msi_desc *entry;
if (!pci_msi_enable || !dev || !dev->msi_enabled)
return;
pci_msi_shutdown(dev);
entry = list_entry(dev->msi_list.next, struct msi_desc, list);
if (!entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI)
return;
msi_free_irqs(dev);
}
EXPORT_SYMBOL(pci_disable_msi);
@ -684,7 +701,7 @@ static void msix_free_all_irqs(struct pci_dev *dev)
msi_free_irqs(dev);
}
void pci_disable_msix(struct pci_dev* dev)
void pci_msix_shutdown(struct pci_dev* dev)
{
if (!pci_msi_enable || !dev || !dev->msix_enabled)
return;
@ -692,6 +709,13 @@ void pci_disable_msix(struct pci_dev* dev)
msix_set_enable(dev, 0);
pci_intx_for_msi(dev, 1);
dev->msix_enabled = 0;
}
void pci_disable_msix(struct pci_dev* dev)
{
if (!pci_msi_enable || !dev || !dev->msix_enabled)
return;
pci_msix_shutdown(dev);
msix_free_all_irqs(dev);
}

2
drivers/pci/pci-driver.c
View File

@ -360,6 +360,8 @@ static void pci_device_shutdown(struct device *dev)
if (drv && drv->shutdown)
drv->shutdown(pci_dev);
pci_msi_shutdown(pci_dev);
pci_msix_shutdown(pci_dev);
}
/**

2
drivers/pci/pcie/Kconfig
View File

@ -33,7 +33,7 @@ source "drivers/pci/pcie/aer/Kconfig"
config PCIEASPM
bool "PCI Express ASPM support(Experimental)"
depends on PCI && EXPERIMENTAL && PCIEPORTBUS
default y
default n
help
This enables PCI Express ASPM (Active State Power Management) and
Clock Power Management. ASPM supports state L0/L0s/L1.

1
include/linux/msi.h
View File

@ -22,6 +22,7 @@ struct msi_desc {
__u8 masked : 1;
__u8 is_64 : 1; /* Address size: 0=32bit 1=64bit */
__u8 pos; /* Location of the msi capability */
__u32 maskbits_mask; /* mask bits mask */
__u16 entry_nr; /* specific enabled entry */
unsigned default_irq; /* default pre-assigned irq */
}msi_attrib;

10
include/linux/pci.h
View File

@ -20,8 +20,6 @@
/* Include the pci register defines */
#include <linux/pci_regs.h>
struct pci_vpd;
/*
* The PCI interface treats multi-function devices as independent
* devices. The slot/function address of each device is encoded
@ -131,6 +129,8 @@ struct pci_cap_saved_state {
};
struct pcie_link_state;
struct pci_vpd;
/*
* The pci_dev structure is used to describe PCI devices.
*/
@ -702,6 +702,8 @@ static inline int pci_enable_msi(struct pci_dev *dev)
return -1;
}
static inline void pci_msi_shutdown(struct pci_dev *dev)
{ }
static inline void pci_disable_msi(struct pci_dev *dev)
{ }
@ -711,6 +713,8 @@ static inline int pci_enable_msix(struct pci_dev *dev,
return -1;
}
static inline void pci_msix_shutdown(struct pci_dev *dev)
{ }
static inline void pci_disable_msix(struct pci_dev *dev)
{ }
@ -721,9 +725,11 @@ static inline void pci_restore_msi_state(struct pci_dev *dev)
{ }
#else
extern int pci_enable_msi(struct pci_dev *dev);
extern void pci_msi_shutdown(struct pci_dev *dev);
extern void pci_disable_msi(struct pci_dev *dev);
extern int pci_enable_msix(struct pci_dev *dev,
struct msix_entry *entries, int nvec);
extern void pci_msix_shutdown(struct pci_dev *dev);
extern void pci_disable_msix(struct pci_dev *dev);
extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
extern void pci_restore_msi_state(struct pci_dev *dev);

2
include/linux/pci_ids.h
View File

@ -2413,6 +2413,8 @@
#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0
#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
#define PCI_DEVICE_ID_INTEL_SCH_LPC 0x8119
#define PCI_DEVICE_ID_INTEL_SCH_IDE 0x811a
#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca