From a2c6e82e5341a283b06b04029f952598e445b159 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 15 Jun 2019 12:38:30 +0200 Subject: [PATCH] ARM: dts: meson: switch to the generic Ethernet PHY reset bindings The snps,reset-gpio bindings are deprecated in favour of the generic "Ethernet PHY reset" bindings. Replace snps,reset-gpio from the ðmac node with reset-gpios in the ethernet-phy node. The old snps,reset-active-low property is now encoded directly as GPIO flag inside the reset-gpios property. snps,reset-delays-us is converted to reset-assert-us and reset-deassert-us. reset-assert-us is the second cell from snps,reset-delays-us while reset-deassert-us was the third cell. Instead of blindly copying the old values (which seems strange since they gave the PHY one second to come out of reset) over this also updates the delays based on the datasheets: - RTL8211F PHY on the Odroid-C1 and MXIII-Plus needs a 10ms assert delay (the datasheet mentions: "For a complete PHY reset, this pin must be asserted low for at least 10ms") and a 30ms deassert delay (the datasheet mentions: "Wait for a further 30ms (for internal circuits settling time) before accessing the PHY register"). The old settings used 10ms for assert and 1000ms for deassert. - IP101GR PHY on the EC-100 and MXQ needs a 10ms assert delay (the datasheet mentions: "Trst | Reset period | 10ms") and a 10ms deassert delay as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock output ready after reset released | 10ms")). The old settings used 10ms for assert and 1000ms for deassert. No functional changes intended. Reviewed-by: Neil Armstrong Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8b-ec100.dts | 9 +++++---- arch/arm/boot/dts/meson8b-mxq.dts | 9 +++++---- arch/arm/boot/dts/meson8b-odroidc1.dts | 9 +++++---- arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 8 ++++---- 4 files changed, 19 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 9bf4249cb60d..96d239d8334e 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -234,10 +234,6 @@ ðmac { phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -246,6 +242,11 @@ mdio { eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + icplus,select-interrupt; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index ef602ab45efd..bb27b34eb346 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -91,10 +91,6 @@ ðmac { phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -103,6 +99,11 @@ mdio { eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + icplus,select-interrupt; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 018695b2b83a..86c4614e0a38 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -176,10 +176,6 @@ &cpu0 { ðmac { status = "okay"; - snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; @@ -195,6 +191,11 @@ mdio { /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index 59b07a55e461..d54477b1001c 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -73,10 +73,6 @@ ðmac { amlogic,tx-delay-ns = <4>; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -85,6 +81,10 @@ mdio { eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; }; }; };