openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

pata_hpt37x: Further small fixes 

Further HPT37x changes

- No 66MHz 370/370A
- Remove dead special case check now we use the DPLL (as per the IDE driver)

Pointed out by Sergei

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Alan Cox 2007-04-26 00:19:25 -07:00 committed by Jeff Garzik
parent 28e21c8c0d
commit a473446856
1 changed files with 9 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
drivers/ata/pata_hpt37x.c
View File

@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
#define DRV_VERSION "0.6.4"
#define DRV_VERSION "0.6.5"
struct hpt_clock {
u8 xfer_speed;
@ -130,7 +130,7 @@ static const struct hpt_chip hpt370 = {
hpt37x_timings_33,
NULL,
NULL,
hpt37x_timings_66
NULL
}
};
@ -141,7 +141,7 @@ static const struct hpt_chip hpt370a = {
hpt37x_timings_33,
NULL,
hpt37x_timings_50,
hpt37x_timings_66
NULL
}
};
@ -1018,8 +1018,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
port = &info_hpt372;
chip_table = &hpt371;
/* Single channel device, paster is not present
but the NIOS (or us for non x86) must mark it
/* Single channel device, master is not present
but the BIOS (or us for non x86) must mark it
absent */
pci_read_config_byte(dev, 0x50, &mcr1);
mcr1 &= ~0x04;
@ -1131,16 +1131,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
} else {
port->private_data = (void *)chip_table->clocks[clock_slot];
/*
* Perform a final fixup. The 371 and 372 clock determines
* if UDMA133 is available. (FIXME: should we use DPLL then ?)
*/
* Perform a final fixup. Note that we will have used the
* DPLL on the HPT372 which means we don't have to worry
* about lack of UDMA133 support on lower clocks
*/
if (clock_slot == 2 && chip_table == &hpt372) { /* 50Mhz */
printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n");
if (port == &info_hpt372)
port = &info_hpt372_50;
else BUG();
}
if (clock_slot < 2 && port == &info_hpt370)
port = &info_hpt370_33;
if (clock_slot < 2 && port == &info_hpt370a)