Merge /spare/repo/linux-2.6/

This commit is contained in:
Jeff Garzik 2005-08-10 13:43:09 -04:00
commit a7144b23da
317 changed files with 8667 additions and 3382 deletions

View File

@ -2380,8 +2380,8 @@ E: tmolina@cablespeed.com
D: bug fixes, documentation, minor hackery D: bug fixes, documentation, minor hackery
N: James Morris N: James Morris
E: jmorris@redhat.com E: jmorris@namei.org
W: http://www.intercode.com.au/jmorris/ W: http://namei.org/
D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec, D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec,
D: Crypto API, general networking, miscellaneous. D: Crypto API, general networking, miscellaneous.
S: PO Box 707 S: PO Box 707

View File

@ -149,6 +149,11 @@ USB, framebuffer devices, the VFS, the SCSI subsystem, etc. See the
MAINTAINERS file for a mailing list that relates specifically to MAINTAINERS file for a mailing list that relates specifically to
your change. your change.
If changes affect userland-kernel interfaces, please send
the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
a man-pages patch, or at least a notification of the change,
so that some information makes its way into the manual pages.
Even if the maintainer did not respond in step #4, make sure to ALWAYS Even if the maintainer did not respond in step #4, make sure to ALWAYS
copy the maintainer when you change their code. copy the maintainer when you change their code.

View File

@ -104,6 +104,7 @@ logo_*.c
logo_*_clut224.c logo_*_clut224.c
logo_*_mono.c logo_*_mono.c
lxdialog lxdialog
mach-types
mach-types.h mach-types.h
make_times_h make_times_h
map map

View File

@ -144,7 +144,21 @@ vgapal Use the standard vga registers for palette changes.
This is the default. This is the default.
pmipal Use the protected mode interface for palette changes. pmipal Use the protected mode interface for palette changes.
mtrr setup memory type range registers for the vesafb framebuffer. mtrr:n setup memory type range registers for the vesafb framebuffer
where n:
0 - disabled (equivalent to nomtrr)
1 - uncachable
2 - write-back
3 - write-combining (default)
4 - write-through
If you see the following in dmesg, choose the type that matches the
old one. In this example, use "mtrr:2".
...
mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
...
nomtrr disable mtrr
vremap:n vremap:n
remap 'n' MiB of video RAM. If 0 or not specified, remap memory remap 'n' MiB of video RAM. If 0 or not specified, remap memory

588
Documentation/kprobes.txt Normal file
View File

@ -0,0 +1,588 @@
Title : Kernel Probes (Kprobes)
Authors : Jim Keniston <jkenisto@us.ibm.com>
: Prasanna S Panchamukhi <prasanna@in.ibm.com>
CONTENTS
1. Concepts: Kprobes, Jprobes, Return Probes
2. Architectures Supported
3. Configuring Kprobes
4. API Reference
5. Kprobes Features and Limitations
6. Probe Overhead
7. TODO
8. Kprobes Example
9. Jprobes Example
10. Kretprobes Example
1. Concepts: Kprobes, Jprobes, Return Probes
Kprobes enables you to dynamically break into any kernel routine and
collect debugging and performance information non-disruptively. You
can trap at almost any kernel code address, specifying a handler
routine to be invoked when the breakpoint is hit.
There are currently three types of probes: kprobes, jprobes, and
kretprobes (also called return probes). A kprobe can be inserted
on virtually any instruction in the kernel. A jprobe is inserted at
the entry to a kernel function, and provides convenient access to the
function's arguments. A return probe fires when a specified function
returns.
In the typical case, Kprobes-based instrumentation is packaged as
a kernel module. The module's init function installs ("registers")
one or more probes, and the exit function unregisters them. A
registration function such as register_kprobe() specifies where
the probe is to be inserted and what handler is to be called when
the probe is hit.
The next three subsections explain how the different types of
probes work. They explain certain things that you'll need to
know in order to make the best use of Kprobes -- e.g., the
difference between a pre_handler and a post_handler, and how
to use the maxactive and nmissed fields of a kretprobe. But
if you're in a hurry to start using Kprobes, you can skip ahead
to section 2.
1.1 How Does a Kprobe Work?
When a kprobe is registered, Kprobes makes a copy of the probed
instruction and replaces the first byte(s) of the probed instruction
with a breakpoint instruction (e.g., int3 on i386 and x86_64).
When a CPU hits the breakpoint instruction, a trap occurs, the CPU's
registers are saved, and control passes to Kprobes via the
notifier_call_chain mechanism. Kprobes executes the "pre_handler"
associated with the kprobe, passing the handler the addresses of the
kprobe struct and the saved registers.
Next, Kprobes single-steps its copy of the probed instruction.
(It would be simpler to single-step the actual instruction in place,
but then Kprobes would have to temporarily remove the breakpoint
instruction. This would open a small time window when another CPU
could sail right past the probepoint.)
After the instruction is single-stepped, Kprobes executes the
"post_handler," if any, that is associated with the kprobe.
Execution then continues with the instruction following the probepoint.
1.2 How Does a Jprobe Work?
A jprobe is implemented using a kprobe that is placed on a function's
entry point. It employs a simple mirroring principle to allow
seamless access to the probed function's arguments. The jprobe
handler routine should have the same signature (arg list and return
type) as the function being probed, and must always end by calling
the Kprobes function jprobe_return().
Here's how it works. When the probe is hit, Kprobes makes a copy of
the saved registers and a generous portion of the stack (see below).
Kprobes then points the saved instruction pointer at the jprobe's
handler routine, and returns from the trap. As a result, control
passes to the handler, which is presented with the same register and
stack contents as the probed function. When it is done, the handler
calls jprobe_return(), which traps again to restore the original stack
contents and processor state and switch to the probed function.
By convention, the callee owns its arguments, so gcc may produce code
that unexpectedly modifies that portion of the stack. This is why
Kprobes saves a copy of the stack and restores it after the jprobe
handler has run. Up to MAX_STACK_SIZE bytes are copied -- e.g.,
64 bytes on i386.
Note that the probed function's args may be passed on the stack
or in registers (e.g., for x86_64 or for an i386 fastcall function).
The jprobe will work in either case, so long as the handler's
prototype matches that of the probed function.
1.3 How Does a Return Probe Work?
When you call register_kretprobe(), Kprobes establishes a kprobe at
the entry to the function. When the probed function is called and this
probe is hit, Kprobes saves a copy of the return address, and replaces
the return address with the address of a "trampoline." The trampoline
is an arbitrary piece of code -- typically just a nop instruction.
At boot time, Kprobes registers a kprobe at the trampoline.
When the probed function executes its return instruction, control
passes to the trampoline and that probe is hit. Kprobes' trampoline
handler calls the user-specified handler associated with the kretprobe,
then sets the saved instruction pointer to the saved return address,
and that's where execution resumes upon return from the trap.
While the probed function is executing, its return address is
stored in an object of type kretprobe_instance. Before calling
register_kretprobe(), the user sets the maxactive field of the
kretprobe struct to specify how many instances of the specified
function can be probed simultaneously. register_kretprobe()
pre-allocates the indicated number of kretprobe_instance objects.
For example, if the function is non-recursive and is called with a
spinlock held, maxactive = 1 should be enough. If the function is
non-recursive and can never relinquish the CPU (e.g., via a semaphore
or preemption), NR_CPUS should be enough. If maxactive <= 0, it is
set to a default value. If CONFIG_PREEMPT is enabled, the default
is max(10, 2*NR_CPUS). Otherwise, the default is NR_CPUS.
It's not a disaster if you set maxactive too low; you'll just miss
some probes. In the kretprobe struct, the nmissed field is set to
zero when the return probe is registered, and is incremented every
time the probed function is entered but there is no kretprobe_instance
object available for establishing the return probe.
2. Architectures Supported
Kprobes, jprobes, and return probes are implemented on the following
architectures:
- i386
- x86_64 (AMD-64, E64MT)
- ppc64
- ia64 (Support for probes on certain instruction types is still in progress.)
- sparc64 (Return probes not yet implemented.)
3. Configuring Kprobes
When configuring the kernel using make menuconfig/xconfig/oldconfig,
ensure that CONFIG_KPROBES is set to "y". Under "Kernel hacking",
look for "Kprobes". You may have to enable "Kernel debugging"
(CONFIG_DEBUG_KERNEL) before you can enable Kprobes.
You may also want to ensure that CONFIG_KALLSYMS and perhaps even
CONFIG_KALLSYMS_ALL are set to "y", since kallsyms_lookup_name()
is a handy, version-independent way to find a function's address.
If you need to insert a probe in the middle of a function, you may find
it useful to "Compile the kernel with debug info" (CONFIG_DEBUG_INFO),
so you can use "objdump -d -l vmlinux" to see the source-to-object
code mapping.
4. API Reference
The Kprobes API includes a "register" function and an "unregister"
function for each type of probe. Here are terse, mini-man-page
specifications for these functions and the associated probe handlers
that you'll write. See the latter half of this document for examples.
4.1 register_kprobe
#include <linux/kprobes.h>
int register_kprobe(struct kprobe *kp);
Sets a breakpoint at the address kp->addr. When the breakpoint is
hit, Kprobes calls kp->pre_handler. After the probed instruction
is single-stepped, Kprobe calls kp->post_handler. If a fault
occurs during execution of kp->pre_handler or kp->post_handler,
or during single-stepping of the probed instruction, Kprobes calls
kp->fault_handler. Any or all handlers can be NULL.
register_kprobe() returns 0 on success, or a negative errno otherwise.
User's pre-handler (kp->pre_handler):
#include <linux/kprobes.h>
#include <linux/ptrace.h>
int pre_handler(struct kprobe *p, struct pt_regs *regs);
Called with p pointing to the kprobe associated with the breakpoint,
and regs pointing to the struct containing the registers saved when
the breakpoint was hit. Return 0 here unless you're a Kprobes geek.
User's post-handler (kp->post_handler):
#include <linux/kprobes.h>
#include <linux/ptrace.h>
void post_handler(struct kprobe *p, struct pt_regs *regs,
unsigned long flags);
p and regs are as described for the pre_handler. flags always seems
to be zero.
User's fault-handler (kp->fault_handler):
#include <linux/kprobes.h>
#include <linux/ptrace.h>
int fault_handler(struct kprobe *p, struct pt_regs *regs, int trapnr);
p and regs are as described for the pre_handler. trapnr is the
architecture-specific trap number associated with the fault (e.g.,
on i386, 13 for a general protection fault or 14 for a page fault).
Returns 1 if it successfully handled the exception.
4.2 register_jprobe
#include <linux/kprobes.h>
int register_jprobe(struct jprobe *jp)
Sets a breakpoint at the address jp->kp.addr, which must be the address
of the first instruction of a function. When the breakpoint is hit,
Kprobes runs the handler whose address is jp->entry.
The handler should have the same arg list and return type as the probed
function; and just before it returns, it must call jprobe_return().
(The handler never actually returns, since jprobe_return() returns
control to Kprobes.) If the probed function is declared asmlinkage,
fastcall, or anything else that affects how args are passed, the
handler's declaration must match.
register_jprobe() returns 0 on success, or a negative errno otherwise.
4.3 register_kretprobe
#include <linux/kprobes.h>
int register_kretprobe(struct kretprobe *rp);
Establishes a return probe for the function whose address is
rp->kp.addr. When that function returns, Kprobes calls rp->handler.
You must set rp->maxactive appropriately before you call
register_kretprobe(); see "How Does a Return Probe Work?" for details.
register_kretprobe() returns 0 on success, or a negative errno
otherwise.
User's return-probe handler (rp->handler):
#include <linux/kprobes.h>
#include <linux/ptrace.h>
int kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs);
regs is as described for kprobe.pre_handler. ri points to the
kretprobe_instance object, of which the following fields may be
of interest:
- ret_addr: the return address
- rp: points to the corresponding kretprobe object
- task: points to the corresponding task struct
The handler's return value is currently ignored.
4.4 unregister_*probe
#include <linux/kprobes.h>
void unregister_kprobe(struct kprobe *kp);
void unregister_jprobe(struct jprobe *jp);
void unregister_kretprobe(struct kretprobe *rp);
Removes the specified probe. The unregister function can be called
at any time after the probe has been registered.
5. Kprobes Features and Limitations
As of Linux v2.6.12, Kprobes allows multiple probes at the same
address. Currently, however, there cannot be multiple jprobes on
the same function at the same time.
In general, you can install a probe anywhere in the kernel.
In particular, you can probe interrupt handlers. Known exceptions
are discussed in this section.
For obvious reasons, it's a bad idea to install a probe in
the code that implements Kprobes (mostly kernel/kprobes.c and
arch/*/kernel/kprobes.c). A patch in the v2.6.13 timeframe instructs
Kprobes to reject such requests.
If you install a probe in an inline-able function, Kprobes makes
no attempt to chase down all inline instances of the function and
install probes there. gcc may inline a function without being asked,
so keep this in mind if you're not seeing the probe hits you expect.
A probe handler can modify the environment of the probed function
-- e.g., by modifying kernel data structures, or by modifying the
contents of the pt_regs struct (which are restored to the registers
upon return from the breakpoint). So Kprobes can be used, for example,
to install a bug fix or to inject faults for testing. Kprobes, of
course, has no way to distinguish the deliberately injected faults
from the accidental ones. Don't drink and probe.
Kprobes makes no attempt to prevent probe handlers from stepping on
each other -- e.g., probing printk() and then calling printk() from a
probe handler. As of Linux v2.6.12, if a probe handler hits a probe,
that second probe's handlers won't be run in that instance.
In Linux v2.6.12 and previous versions, Kprobes' data structures are
protected by a single lock that is held during probe registration and
unregistration and while handlers are run. Thus, no two handlers
can run simultaneously. To improve scalability on SMP systems,
this restriction will probably be removed soon, in which case
multiple handlers (or multiple instances of the same handler) may
run concurrently on different CPUs. Code your handlers accordingly.
Kprobes does not use semaphores or allocate memory except during
registration and unregistration.
Probe handlers are run with preemption disabled. Depending on the
architecture, handlers may also run with interrupts disabled. In any
case, your handler should not yield the CPU (e.g., by attempting to
acquire a semaphore).
Since a return probe is implemented by replacing the return
address with the trampoline's address, stack backtraces and calls
to __builtin_return_address() will typically yield the trampoline's
address instead of the real return address for kretprobed functions.
(As far as we can tell, __builtin_return_address() is used only
for instrumentation and error reporting.)
If the number of times a function is called does not match the
number of times it returns, registering a return probe on that
function may produce undesirable results. We have the do_exit()
and do_execve() cases covered. do_fork() is not an issue. We're
unaware of other specific cases where this could be a problem.
6. Probe Overhead
On a typical CPU in use in 2005, a kprobe hit takes 0.5 to 1.0
microseconds to process. Specifically, a benchmark that hits the same
probepoint repeatedly, firing a simple handler each time, reports 1-2
million hits per second, depending on the architecture. A jprobe or
return-probe hit typically takes 50-75% longer than a kprobe hit.
When you have a return probe set on a function, adding a kprobe at
the entry to that function adds essentially no overhead.
Here are sample overhead figures (in usec) for different architectures.
k = kprobe; j = jprobe; r = return probe; kr = kprobe + return probe
on same function; jr = jprobe + return probe on same function
i386: Intel Pentium M, 1495 MHz, 2957.31 bogomips
k = 0.57 usec; j = 1.00; r = 0.92; kr = 0.99; jr = 1.40
x86_64: AMD Opteron 246, 1994 MHz, 3971.48 bogomips
k = 0.49 usec; j = 0.76; r = 0.80; kr = 0.82; jr = 1.07
ppc64: POWER5 (gr), 1656 MHz (SMT disabled, 1 virtual CPU per physical CPU)
k = 0.77 usec; j = 1.31; r = 1.26; kr = 1.45; jr = 1.99
7. TODO
a. SystemTap (http://sourceware.org/systemtap): Work in progress
to provide a simplified programming interface for probe-based
instrumentation.
b. Improved SMP scalability: Currently, work is in progress to handle
multiple kprobes in parallel.
c. Kernel return probes for sparc64.
d. Support for other architectures.
e. User-space probes.
8. Kprobes Example
Here's a sample kernel module showing the use of kprobes to dump a
stack trace and selected i386 registers when do_fork() is called.
----- cut here -----
/*kprobe_example.c*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kprobes.h>
#include <linux/kallsyms.h>
#include <linux/sched.h>
/*For each probe you need to allocate a kprobe structure*/
static struct kprobe kp;
/*kprobe pre_handler: called just before the probed instruction is executed*/
int handler_pre(struct kprobe *p, struct pt_regs *regs)
{
printk("pre_handler: p->addr=0x%p, eip=%lx, eflags=0x%lx\n",
p->addr, regs->eip, regs->eflags);
dump_stack();
return 0;
}
/*kprobe post_handler: called after the probed instruction is executed*/
void handler_post(struct kprobe *p, struct pt_regs *regs, unsigned long flags)
{
printk("post_handler: p->addr=0x%p, eflags=0x%lx\n",
p->addr, regs->eflags);
}
/* fault_handler: this is called if an exception is generated for any
* instruction within the pre- or post-handler, or when Kprobes
* single-steps the probed instruction.
*/
int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
{
printk("fault_handler: p->addr=0x%p, trap #%dn",
p->addr, trapnr);
/* Return 0 because we don't handle the fault. */
return 0;
}
int init_module(void)
{
int ret;
kp.pre_handler = handler_pre;
kp.post_handler = handler_post;
kp.fault_handler = handler_fault;
kp.addr = (kprobe_opcode_t*) kallsyms_lookup_name("do_fork");
/* register the kprobe now */
if (!kp.addr) {
printk("Couldn't find %s to plant kprobe\n", "do_fork");
return -1;
}
if ((ret = register_kprobe(&kp) < 0)) {
printk("register_kprobe failed, returned %d\n", ret);
return -1;
}
printk("kprobe registered\n");
return 0;
}
void cleanup_module(void)
{
unregister_kprobe(&kp);
printk("kprobe unregistered\n");
}
MODULE_LICENSE("GPL");
----- cut here -----
You can build the kernel module, kprobe-example.ko, using the following
Makefile:
----- cut here -----
obj-m := kprobe-example.o
KDIR := /lib/modules/$(shell uname -r)/build
PWD := $(shell pwd)
default:
$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
clean:
rm -f *.mod.c *.ko *.o
----- cut here -----
$ make
$ su -
...
# insmod kprobe-example.ko
You will see the trace data in /var/log/messages and on the console
whenever do_fork() is invoked to create a new process.
9. Jprobes Example
Here's a sample kernel module showing the use of jprobes to dump
the arguments of do_fork().
----- cut here -----
/*jprobe-example.c */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/uio.h>
#include <linux/kprobes.h>
#include <linux/kallsyms.h>
/*
* Jumper probe for do_fork.
* Mirror principle enables access to arguments of the probed routine
* from the probe handler.
*/
/* Proxy routine having the same arguments as actual do_fork() routine */
long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
struct pt_regs *regs, unsigned long stack_size,
int __user * parent_tidptr, int __user * child_tidptr)
{
printk("jprobe: clone_flags=0x%lx, stack_size=0x%lx, regs=0x%p\n",
clone_flags, stack_size, regs);
/* Always end with a call to jprobe_return(). */
jprobe_return();
/*NOTREACHED*/
return 0;
}
static struct jprobe my_jprobe = {
.entry = (kprobe_opcode_t *) jdo_fork
};
int init_module(void)
{
int ret;
my_jprobe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("do_fork");
if (!my_jprobe.kp.addr) {
printk("Couldn't find %s to plant jprobe\n", "do_fork");
return -1;
}
if ((ret = register_jprobe(&my_jprobe)) <0) {
printk("register_jprobe failed, returned %d\n", ret);
return -1;
}
printk("Planted jprobe at %p, handler addr %p\n",
my_jprobe.kp.addr, my_jprobe.entry);
return 0;
}
void cleanup_module(void)
{
unregister_jprobe(&my_jprobe);
printk("jprobe unregistered\n");
}
MODULE_LICENSE("GPL");
----- cut here -----
Build and insert the kernel module as shown in the above kprobe
example. You will see the trace data in /var/log/messages and on
the console whenever do_fork() is invoked to create a new process.
(Some messages may be suppressed if syslogd is configured to
eliminate duplicate messages.)
10. Kretprobes Example
Here's a sample kernel module showing the use of return probes to
report failed calls to sys_open().
----- cut here -----
/*kretprobe-example.c*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kprobes.h>
#include <linux/kallsyms.h>
static const char *probed_func = "sys_open";
/* Return-probe handler: If the probed function fails, log the return value. */
static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
{
// Substitute the appropriate register name for your architecture --
// e.g., regs->rax for x86_64, regs->gpr[3] for ppc64.
int retval = (int) regs->eax;
if (retval < 0) {
printk("%s returns %d\n", probed_func, retval);
}
return 0;
}
static struct kretprobe my_kretprobe = {
.handler = ret_handler,
/* Probe up to 20 instances concurrently. */
.maxactive = 20
};
int init_module(void)
{
int ret;
my_kretprobe.kp.addr =
(kprobe_opcode_t *) kallsyms_lookup_name(probed_func);
if (!my_kretprobe.kp.addr) {
printk("Couldn't find %s to plant return probe\n", probed_func);
return -1;
}
if ((ret = register_kretprobe(&my_kretprobe)) < 0) {
printk("register_kretprobe failed, returned %d\n", ret);
return -1;
}
printk("Planted return probe at %p\n", my_kretprobe.kp.addr);
return 0;
}
void cleanup_module(void)
{
unregister_kretprobe(&my_kretprobe);
printk("kretprobe unregistered\n");
/* nmissed > 0 suggests that maxactive was set too low. */
printk("Missed probing %d instances of %s\n",
my_kretprobe.nmissed, probed_func);
}
MODULE_LICENSE("GPL");
----- cut here -----
Build and insert the kernel module as shown in the above kprobe
example. You will see the trace data in /var/log/messages and on the
console whenever sys_open() returns a negative value. (Some messages
may be suppressed if syslogd is configured to eliminate duplicate
messages.)
For additional information on Kprobes, refer to the following URLs:
http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
http://www.redhat.com/magazine/005mar05/features/kprobes/

File diff suppressed because it is too large Load Diff

View File

@ -102,7 +102,7 @@ Here is the list of words, from left to right:
- URB Status. This field makes no sense for submissions, but is present - URB Status. This field makes no sense for submissions, but is present
to help scripts with parsing. In error case, it contains the error code. to help scripts with parsing. In error case, it contains the error code.
In case of a setup packet, it contains a Setup Tag. If scripts read a number In case of a setup packet, it contains a Setup Tag. If scripts read a number
in this field, the proceed to read Data Length. Otherwise, they read in this field, they proceed to read Data Length. Otherwise, they read
the setup packet before reading the Data Length. the setup packet before reading the Data Length.
- Setup packet, if present, consists of 5 words: one of each for bmRequestType, - Setup packet, if present, consists of 5 words: one of each for bmRequestType,
bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0. bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0.

View File

@ -29,3 +29,4 @@ card=27 - PixelView PlayTV Ultra Pro (Stereo)
card=28 - DViCO FusionHDTV 3 Gold-T card=28 - DViCO FusionHDTV 3 Gold-T
card=29 - ADS Tech Instant TV DVB-T PCI card=29 - ADS Tech Instant TV DVB-T PCI
card=30 - TerraTec Cinergy 1400 DVB-T card=30 - TerraTec Cinergy 1400 DVB-T
card=31 - DViCO FusionHDTV 5 Gold

View File

@ -62,3 +62,5 @@ tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
tuner=62 - Philips TEA5767HN FM Radio tuner=62 - Philips TEA5767HN FM Radio
tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
tuner=64 - LG TDVS-H062F/TUA6034
tuner=65 - Ymec TVF66T5-B/DFF

View File

@ -44,6 +44,9 @@ bttv.o
push used by bttv. bttv will disable overlay push used by bttv. bttv will disable overlay
by default on this hardware to avoid crashes. by default on this hardware to avoid crashes.
With this insmod option you can override this. With this insmod option you can override this.
no_overlay=1 Disable overlay. It should be used by broken
hardware that doesn't support PCI2PCI direct
transfers.
automute=0/1 Automatically mutes the sound if there is automute=0/1 Automatically mutes the sound if there is
no TV signal, on by default. You might try no TV signal, on by default. You might try
to disable this if you have bad input signal to disable this if you have bad input signal

View File

@ -6,6 +6,11 @@ only the AMD64 specific ones are listed here.
Machine check Machine check
mce=off disable machine check mce=off disable machine check
mce=bootlog Enable logging of machine checks left over from booting.
Disabled by default because some BIOS leave bogus ones.
If your BIOS doesn't do that it's a good idea to enable though
to make sure you log even machine check events that result
in a reboot.
nomce (for compatibility with i386): same as mce=off nomce (for compatibility with i386): same as mce=off

View File

@ -1521,6 +1521,12 @@ P: Zach Brown
M: zab@zabbo.net M: zab@zabbo.net
S: Odd Fixes S: Odd Fixes
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
P: Michael Kerrisk
M: mtk-manpages@gmx.net
W: ftp://ftp.kernel.org/pub/linux/docs/manpages
S: Maintained
MARVELL MV64340 ETHERNET DRIVER MARVELL MV64340 ETHERNET DRIVER
P: Manish Lachwani P: Manish Lachwani
M: Manish_Lachwani@pmc-sierra.com M: Manish_Lachwani@pmc-sierra.com
@ -1652,7 +1658,7 @@ M: kuznet@ms2.inr.ac.ru
P: Pekka Savola (ipv6) P: Pekka Savola (ipv6)
M: pekkas@netcore.fi M: pekkas@netcore.fi
P: James Morris P: James Morris
M: jmorris@redhat.com M: jmorris@namei.org
P: Hideaki YOSHIFUJI P: Hideaki YOSHIFUJI
M: yoshfuji@linux-ipv6.org M: yoshfuji@linux-ipv6.org
P: Patrick McHardy P: Patrick McHardy
@ -2041,7 +2047,7 @@ SELINUX SECURITY MODULE
P: Stephen Smalley P: Stephen Smalley
M: sds@epoch.ncsc.mil M: sds@epoch.ncsc.mil
P: James Morris P: James Morris
M: jmorris@redhat.com M: jmorris@namei.org
L: linux-kernel@vger.kernel.org (kernel issues) L: linux-kernel@vger.kernel.org (kernel issues)
L: selinux@tycho.nsa.gov (general discussion) L: selinux@tycho.nsa.gov (general discussion)
W: http://www.nsa.gov/selinux W: http://www.nsa.gov/selinux

View File

@ -1,7 +1,7 @@
VERSION = 2 VERSION = 2
PATCHLEVEL = 6 PATCHLEVEL = 6
SUBLEVEL = 13 SUBLEVEL = 13
EXTRAVERSION =-rc4 EXTRAVERSION =-rc6
NAME=Woozy Numbat NAME=Woozy Numbat
# *DOCUMENTATION* # *DOCUMENTATION*

View File

@ -41,18 +41,19 @@ summary from [1.]>" for easy identification by the developers
[2.] Full description of the problem/report: [2.] Full description of the problem/report:
[3.] Keywords (i.e., modules, networking, kernel): [3.] Keywords (i.e., modules, networking, kernel):
[4.] Kernel version (from /proc/version): [4.] Kernel version (from /proc/version):
[5.] Output of Oops.. message (if applicable) with symbolic information [5.] Most recent kernel version which did not have the bug:
[6.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt) resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the [7.] A small shell script or example program which triggers the
problem (if possible) problem (if possible)
[7.] Environment [8.] Environment
[7.1.] Software (add the output of the ver_linux script here) [8.1.] Software (add the output of the ver_linux script here)
[7.2.] Processor information (from /proc/cpuinfo): [8.2.] Processor information (from /proc/cpuinfo):
[7.3.] Module information (from /proc/modules): [8.3.] Module information (from /proc/modules):
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
[7.5.] PCI information ('lspci -vvv' as root) [8.5.] PCI information ('lspci -vvv' as root)
[7.6.] SCSI information (from /proc/scsi/scsi) [8.6.] SCSI information (from /proc/scsi/scsi)
[7.7.] Other information that might be relevant to the problem [8.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you (please look in /proc and include all information that you
think to be relevant): think to be relevant):
[X.] Other notes, patches, fixes, workarounds: [X.] Other notes, patches, fixes, workarounds:

View File

@ -350,8 +350,24 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
region->end = res->end - offset; region->end = res->end - offset;
} }
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
unsigned long offset = 0;
if (res->flags & IORESOURCE_IO)
offset = hose->io_space->start;
else if (res->flags & IORESOURCE_MEM)
offset = hose->mem_space->start;
res->start = region->start + offset;
res->end = region->end + offset;
}
#ifdef CONFIG_HOTPLUG #ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_resource_to_bus);
EXPORT_SYMBOL(pcibios_bus_to_resource);
#endif #endif
int int

View File

@ -447,9 +447,26 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
region->end = res->end - offset; region->end = res->end - offset;
} }
void __devinit
pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
struct pci_sys_data *root = dev->sysdata;
unsigned long offset = 0;
if (res->flags & IORESOURCE_IO)
offset = root->io_offset;
if (res->flags & IORESOURCE_MEM)
offset = root->mem_offset;
res->start = region->start + offset;
res->end = region->end + offset;
}
#ifdef CONFIG_HOTPLUG #ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_fixup_bus); EXPORT_SYMBOL(pcibios_fixup_bus);
EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_resource_to_bus);
EXPORT_SYMBOL(pcibios_bus_to_resource);
#endif #endif
/* /*

View File

@ -61,7 +61,7 @@ static struct plat_serial8250_port coyote_uart_data[] = {
.mapbase = IXP4XX_UART2_BASE_PHYS, .mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2, .irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM, .iotype = UPIO_MEM,
.regshift = 2, .regshift = 2,
.uartclk = IXP4XX_UART_XTAL, .uartclk = IXP4XX_UART_XTAL,

View File

@ -83,7 +83,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
.mapbase = IXP4XX_UART2_BASE_PHYS, .mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2, .irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM, .iotype = UPIO_MEM,
.regshift = 2, .regshift = 2,
.uartclk = IXP4XX_UART_XTAL, .uartclk = IXP4XX_UART_XTAL,

View File

@ -82,7 +82,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
.mapbase = IXP4XX_UART1_BASE_PHYS, .mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1, .irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM, .iotype = UPIO_MEM,
.regshift = 2, .regshift = 2,
.uartclk = IXP4XX_UART_XTAL, .uartclk = IXP4XX_UART_XTAL,
@ -91,7 +91,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
.mapbase = IXP4XX_UART2_BASE_PHYS, .mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1, .irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM, .iotype = UPIO_MEM,
.regshift = 2, .regshift = 2,
.uartclk = IXP4XX_UART_XTAL, .uartclk = IXP4XX_UART_XTAL,

View File

@ -30,6 +30,7 @@
* 28-Jun-2005 BJD Moved pm functionality out to common code * 28-Jun-2005 BJD Moved pm functionality out to common code
* 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s * 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s
* 25-Jul-2005 BJD Removed ASIX static mappings * 25-Jul-2005 BJD Removed ASIX static mappings
* 27-Jul-2005 BJD Ensure maximum frequency of i2c bus
*/ */
#include <linux/kernel.h> #include <linux/kernel.h>
@ -60,6 +61,7 @@
#include <asm/arch/regs-mem.h> #include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h> #include <asm/arch/regs-lcd.h>
#include <asm/arch/nand.h> #include <asm/arch/nand.h>
#include <asm/arch/iic.h>
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h> #include <linux/mtd/nand.h>
@ -304,7 +306,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
} }
static struct s3c2410_platform_nand bast_nand_info = { static struct s3c2410_platform_nand bast_nand_info = {
.tacls = 80, .tacls = 40,
.twrph0 = 80, .twrph0 = 80,
.twrph1 = 80, .twrph1 = 80,
.nr_sets = ARRAY_SIZE(bast_nand_sets), .nr_sets = ARRAY_SIZE(bast_nand_sets),
@ -385,6 +387,17 @@ static struct platform_device bast_sio = {
}, },
}; };
/* we have devices on the bus which cannot work much over the
* standard 100KHz i2c bus frequency
*/
static struct s3c2410_platform_i2c bast_i2c_info = {
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 130*1000,
};
/* Standard BAST devices */ /* Standard BAST devices */
static struct platform_device *bast_devices[] __initdata = { static struct platform_device *bast_devices[] __initdata = {
@ -431,6 +444,7 @@ void __init bast_map_io(void)
s3c24xx_uclk.parent = &s3c24xx_clkout1; s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c_device_nand.dev.platform_data = &bast_nand_info; s3c_device_nand.dev.platform_data = &bast_nand_info;
s3c_device_i2c.dev.platform_data = &bast_i2c_info;
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0); s3c24xx_init_clocks(0);

View File

@ -97,6 +97,7 @@ static void __init jornada720_map_io(void)
} }
MACHINE_START(JORNADA720, "HP Jornada 720") MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Michael Gernoth <michael@gernoth.net> */
.phys_ram = 0xc0000000, .phys_ram = 0xc0000000,
.phys_io = 0x80000000, .phys_io = 0x80000000,
.io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,

View File

@ -238,9 +238,9 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
up_read(&mm->mmap_sem); up_read(&mm->mmap_sem);
/* /*
* Handle the "normal" case first * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
*/ */
if (fault > 0) if (fault >= VM_FAULT_MINOR)
return 0; return 0;
/* /*
@ -261,7 +261,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
do_exit(SIGKILL); do_exit(SIGKILL);
return 0; return 0;
case 0: case VM_FAULT_SIGBUS:
/* /*
* We had some memory, but were unable to * We had some memory, but were unable to
* successfully fix up this page fault. * successfully fix up this page fault.

View File

@ -370,142 +370,6 @@ ENTRY(cpu_xscale_dcache_clean_area)
bhi 1b bhi 1b
mov pc, lr mov pc, lr
/* ================================ CACHE LOCKING============================
*
* The XScale MicroArchitecture implements support for locking entries into
* the data and instruction cache. The following functions implement the core
* low level instructions needed to accomplish the locking. The developer's
* manual states that the code that performs the locking must be in non-cached
* memory. To accomplish this, the code in xscale-cache-lock.c copies the
* following functions from the cache into a non-cached memory region that
* is allocated through consistent_alloc().
*
*/
.align 5
/*
* xscale_icache_lock
*
* r0: starting address to lock
* r1: end address to lock
*/
ENTRY(xscale_icache_lock)
iLockLoop:
bic r0, r0, #CACHELINESIZE - 1
mcr p15, 0, r0, c9, c1, 0 @ lock into cache
cmp r0, r1 @ are we done?
add r0, r0, #CACHELINESIZE @ advance to next cache line
bls iLockLoop
mov pc, lr
/*
* xscale_icache_unlock
*/
ENTRY(xscale_icache_unlock)
mcr p15, 0, r0, c9, c1, 1 @ Unlock icache
mov pc, lr
/*
* xscale_dcache_lock
*
* r0: starting address to lock
* r1: end address to lock
*/
ENTRY(xscale_dcache_lock)
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov r2, #1
mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode
cpwait ip @ Wait for completion
mrs r2, cpsr
orr r3, r2, #PSR_F_BIT | PSR_I_BIT
dLockLoop:
msr cpsr_c, r3
mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty
mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line
msr cpsr_c, r2
ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
@ location [r0]. Post-increment
@ r3 to next cache line
cmp r0, r1 @ Are we done?
bls dLockLoop
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov r2, #0
mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode
cpwait_ret lr, ip
/*
* xscale_dcache_unlock
*/
ENTRY(xscale_dcache_unlock)
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mcr p15, 0, ip, c9, c2, 1 @ Unlock cache
mov pc, lr
/*
* Needed to determine the length of the code that needs to be copied.
*/
.align 5
ENTRY(xscale_cache_dummy)
mov pc, lr
/* ================================ TLB LOCKING==============================
*
* The XScale MicroArchitecture implements support for locking entries into
* the Instruction and Data TLBs. The following functions provide the
* low level support for supporting these under Linux. xscale-lock.c
* implements some higher level management code. Most of the following
* is taken straight out of the Developer's Manual.
*/
/*
* Lock I-TLB entry
*
* r0: Virtual address to translate and lock
*/
.align 5
ENTRY(xscale_itlb_lock)
mrs r2, cpsr
orr r3, r2, #PSR_F_BIT | PSR_I_BIT
msr cpsr_c, r3 @ Disable interrupts
mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry
mcr p15, 0, r0, c10, c4, 0 @ Translate and lock
msr cpsr_c, r2 @ Restore interrupts
cpwait_ret lr, ip
/*
* Lock D-TLB entry
*
* r0: Virtual address to translate and lock
*/
.align 5
ENTRY(xscale_dtlb_lock)
mrs r2, cpsr
orr r3, r2, #PSR_F_BIT | PSR_I_BIT
msr cpsr_c, r3 @ Disable interrupts
mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry
mcr p15, 0, r0, c10, c8, 0 @ Translate and lock
msr cpsr_c, r2 @ Restore interrupts
cpwait_ret lr, ip
/*
* Unlock all I-TLB entries
*/
.align 5
ENTRY(xscale_itlb_unlock)
mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB
mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB
cpwait_ret lr, ip
/*
* Unlock all D-TLB entries
*/
ENTRY(xscale_dtlb_unlock)
mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL
mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB
cpwait_ret lr, ip
/* =============================== PageTable ============================== */ /* =============================== PageTable ============================== */
#define PTE_CACHE_WRITE_ALLOCATE 0 #define PTE_CACHE_WRITE_ALLOCATE 0

View File

@ -40,17 +40,17 @@ float64 float64_arccos(float64 rFm);
float64 float64_pow(float64 rFn, float64 rFm); float64 float64_pow(float64 rFn, float64 rFm);
float64 float64_pol(float64 rFn, float64 rFm); float64 float64_pol(float64 rFn, float64 rFm);
static float64 float64_rsf(float64 rFn, float64 rFm) static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm)
{ {
return float64_sub(rFm, rFn); return float64_sub(roundData, rFm, rFn);
} }
static float64 float64_rdv(float64 rFn, float64 rFm) static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm)
{ {
return float64_div(rFm, rFn); return float64_div(roundData, rFm, rFn);
} }
static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = { static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = {
[ADF_CODE >> 20] = float64_add, [ADF_CODE >> 20] = float64_add,
[MUF_CODE >> 20] = float64_mul, [MUF_CODE >> 20] = float64_mul,
[SUF_CODE >> 20] = float64_sub, [SUF_CODE >> 20] = float64_sub,
@ -65,12 +65,12 @@ static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = {
[FRD_CODE >> 20] = float64_rdv, [FRD_CODE >> 20] = float64_rdv,
}; };
static float64 float64_mvf(float64 rFm) static float64 float64_mvf(struct roundingData *roundData,float64 rFm)
{ {
return rFm; return rFm;
} }
static float64 float64_mnf(float64 rFm) static float64 float64_mnf(struct roundingData *roundData,float64 rFm)
{ {
union float64_components u; union float64_components u;
@ -84,7 +84,7 @@ static float64 float64_mnf(float64 rFm)
return u.f64; return u.f64;
} }
static float64 float64_abs(float64 rFm) static float64 float64_abs(struct roundingData *roundData,float64 rFm)
{ {
union float64_components u; union float64_components u;
@ -98,7 +98,7 @@ static float64 float64_abs(float64 rFm)
return u.f64; return u.f64;
} }
static float64 (*const monadic_double[16])(float64 rFm) = { static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = {
[MVF_CODE >> 20] = float64_mvf, [MVF_CODE >> 20] = float64_mvf,
[MNF_CODE >> 20] = float64_mnf, [MNF_CODE >> 20] = float64_mnf,
[ABS_CODE >> 20] = float64_abs, [ABS_CODE >> 20] = float64_abs,
@ -108,7 +108,7 @@ static float64 (*const monadic_double[16])(float64 rFm) = {
[NRM_CODE >> 20] = float64_mvf, [NRM_CODE >> 20] = float64_mvf,
}; };
unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd) unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
float64 rFm; float64 rFm;
@ -151,13 +151,13 @@ unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd)
} }
if (dyadic_double[opc_mask_shift]) { if (dyadic_double[opc_mask_shift]) {
rFd->fDouble = dyadic_double[opc_mask_shift](rFn, rFm); rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm);
} else { } else {
return 0; return 0;
} }
} else { } else {
if (monadic_double[opc_mask_shift]) { if (monadic_double[opc_mask_shift]) {
rFd->fDouble = monadic_double[opc_mask_shift](rFm); rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm);
} else { } else {
return 0; return 0;
} }

View File

@ -35,17 +35,17 @@ floatx80 floatx80_arccos(floatx80 rFm);
floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm); floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm);
floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm); floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm);
static floatx80 floatx80_rsf(floatx80 rFn, floatx80 rFm) static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
{ {
return floatx80_sub(rFm, rFn); return floatx80_sub(roundData, rFm, rFn);
} }
static floatx80 floatx80_rdv(floatx80 rFn, floatx80 rFm) static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
{ {
return floatx80_div(rFm, rFn); return floatx80_div(roundData, rFm, rFn);
} }
static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = { static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = {
[ADF_CODE >> 20] = floatx80_add, [ADF_CODE >> 20] = floatx80_add,
[MUF_CODE >> 20] = floatx80_mul, [MUF_CODE >> 20] = floatx80_mul,
[SUF_CODE >> 20] = floatx80_sub, [SUF_CODE >> 20] = floatx80_sub,
@ -60,24 +60,24 @@ static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = {
[FRD_CODE >> 20] = floatx80_rdv, [FRD_CODE >> 20] = floatx80_rdv,
}; };
static floatx80 floatx80_mvf(floatx80 rFm) static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm)
{ {
return rFm; return rFm;
} }
static floatx80 floatx80_mnf(floatx80 rFm) static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm)
{ {
rFm.high ^= 0x8000; rFm.high ^= 0x8000;
return rFm; return rFm;
} }
static floatx80 floatx80_abs(floatx80 rFm) static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm)
{ {
rFm.high &= 0x7fff; rFm.high &= 0x7fff;
return rFm; return rFm;
} }
static floatx80 (*const monadic_extended[16])(floatx80 rFm) = { static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = {
[MVF_CODE >> 20] = floatx80_mvf, [MVF_CODE >> 20] = floatx80_mvf,
[MNF_CODE >> 20] = floatx80_mnf, [MNF_CODE >> 20] = floatx80_mnf,
[ABS_CODE >> 20] = floatx80_abs, [ABS_CODE >> 20] = floatx80_abs,
@ -87,7 +87,7 @@ static floatx80 (*const monadic_extended[16])(floatx80 rFm) = {
[NRM_CODE >> 20] = floatx80_mvf, [NRM_CODE >> 20] = floatx80_mvf,
}; };
unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd) unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
floatx80 rFm; floatx80 rFm;
@ -138,13 +138,13 @@ unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd)
} }
if (dyadic_extended[opc_mask_shift]) { if (dyadic_extended[opc_mask_shift]) {
rFd->fExtended = dyadic_extended[opc_mask_shift](rFn, rFm); rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm);
} else { } else {
return 0; return 0;
} }
} else { } else {
if (monadic_extended[opc_mask_shift]) { if (monadic_extended[opc_mask_shift]) {
rFd->fExtended = monadic_extended[opc_mask_shift](rFm); rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm);
} else { } else {
return 0; return 0;
} }

View File

@ -51,48 +51,42 @@ static void resetFPA11(void)
fpa11->fpsr = FP_EMULATOR | BIT_AC; fpa11->fpsr = FP_EMULATOR | BIT_AC;
} }
void SetRoundingMode(const unsigned int opcode) int8 SetRoundingMode(const unsigned int opcode)
{ {
switch (opcode & MASK_ROUNDING_MODE) { switch (opcode & MASK_ROUNDING_MODE) {
default: default:
case ROUND_TO_NEAREST: case ROUND_TO_NEAREST:
float_rounding_mode = float_round_nearest_even; return float_round_nearest_even;
break;
case ROUND_TO_PLUS_INFINITY: case ROUND_TO_PLUS_INFINITY:
float_rounding_mode = float_round_up; return float_round_up;
break;
case ROUND_TO_MINUS_INFINITY: case ROUND_TO_MINUS_INFINITY:
float_rounding_mode = float_round_down; return float_round_down;
break;
case ROUND_TO_ZERO: case ROUND_TO_ZERO:
float_rounding_mode = float_round_to_zero; return float_round_to_zero;
break;
} }
} }
void SetRoundingPrecision(const unsigned int opcode) int8 SetRoundingPrecision(const unsigned int opcode)
{ {
#ifdef CONFIG_FPE_NWFPE_XP #ifdef CONFIG_FPE_NWFPE_XP
switch (opcode & MASK_ROUNDING_PRECISION) { switch (opcode & MASK_ROUNDING_PRECISION) {
case ROUND_SINGLE: case ROUND_SINGLE:
floatx80_rounding_precision = 32; return 32;
break;
case ROUND_DOUBLE: case ROUND_DOUBLE:
floatx80_rounding_precision = 64; return 64;
break;
case ROUND_EXTENDED: case ROUND_EXTENDED:
floatx80_rounding_precision = 80; return 80;
break;
default: default:
floatx80_rounding_precision = 80; return 80;
} }
#endif #endif
return 80;
} }
void nwfpe_init_fpa(union fp_state *fp) void nwfpe_init_fpa(union fp_state *fp)
@ -103,8 +97,6 @@ void nwfpe_init_fpa(union fp_state *fp)
#endif #endif
memset(fpa11, 0, sizeof(FPA11)); memset(fpa11, 0, sizeof(FPA11));
resetFPA11(); resetFPA11();
SetRoundingMode(ROUND_TO_NEAREST);
SetRoundingPrecision(ROUND_EXTENDED);
fpa11->initflag = 1; fpa11->initflag = 1;
} }

View File

@ -37,6 +37,13 @@
/* includes */ /* includes */
#include "fpsr.h" /* FP control and status register definitions */ #include "fpsr.h" /* FP control and status register definitions */
#include "milieu.h" #include "milieu.h"
struct roundingData {
int8 mode;
int8 precision;
signed char exception;
};
#include "softfloat.h" #include "softfloat.h"
#define typeNone 0x00 #define typeNone 0x00
@ -84,8 +91,8 @@ typedef struct tagFPA11 {
initialised. */ initialised. */
} FPA11; } FPA11;
extern void SetRoundingMode(const unsigned int); extern int8 SetRoundingMode(const unsigned int);
extern void SetRoundingPrecision(const unsigned int); extern int8 SetRoundingPrecision(const unsigned int);
extern void nwfpe_init_fpa(union fp_state *fp); extern void nwfpe_init_fpa(union fp_state *fp);
#endif #endif

View File

@ -24,15 +24,16 @@
#include "fpa11.h" #include "fpa11.h"
#include "fpopcode.h" #include "fpopcode.h"
unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd); unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd); unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd); unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
unsigned int EmulateCPDO(const unsigned int opcode) unsigned int EmulateCPDO(const unsigned int opcode)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
FPREG *rFd; FPREG *rFd;
unsigned int nType, nDest, nRc; unsigned int nType, nDest, nRc;
struct roundingData roundData;
/* Get the destination size. If not valid let Linux perform /* Get the destination size. If not valid let Linux perform
an invalid instruction trap. */ an invalid instruction trap. */
@ -40,7 +41,9 @@ unsigned int EmulateCPDO(const unsigned int opcode)
if (typeNone == nDest) if (typeNone == nDest)
return 0; return 0;
SetRoundingMode(opcode); roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
/* Compare the size of the operands in Fn and Fm. /* Compare the size of the operands in Fn and Fm.
Choose the largest size and perform operations in that size, Choose the largest size and perform operations in that size,
@ -63,14 +66,14 @@ unsigned int EmulateCPDO(const unsigned int opcode)
switch (nType) { switch (nType) {
case typeSingle: case typeSingle:
nRc = SingleCPDO(opcode, rFd); nRc = SingleCPDO(&roundData, opcode, rFd);
break; break;
case typeDouble: case typeDouble:
nRc = DoubleCPDO(opcode, rFd); nRc = DoubleCPDO(&roundData, opcode, rFd);
break; break;
#ifdef CONFIG_FPE_NWFPE_XP #ifdef CONFIG_FPE_NWFPE_XP
case typeExtended: case typeExtended:
nRc = ExtendedCPDO(opcode, rFd); nRc = ExtendedCPDO(&roundData, opcode, rFd);
break; break;
#endif #endif
default: default:
@ -93,9 +96,9 @@ unsigned int EmulateCPDO(const unsigned int opcode)
case typeSingle: case typeSingle:
{ {
if (typeDouble == nType) if (typeDouble == nType)
rFd->fSingle = float64_to_float32(rFd->fDouble); rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
else else
rFd->fSingle = floatx80_to_float32(rFd->fExtended); rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended);
} }
break; break;
@ -104,7 +107,7 @@ unsigned int EmulateCPDO(const unsigned int opcode)
if (typeSingle == nType) if (typeSingle == nType)
rFd->fDouble = float32_to_float64(rFd->fSingle); rFd->fDouble = float32_to_float64(rFd->fSingle);
else else
rFd->fDouble = floatx80_to_float64(rFd->fExtended); rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended);
} }
break; break;
@ -121,12 +124,15 @@ unsigned int EmulateCPDO(const unsigned int opcode)
#else #else
if (nDest != nType) { if (nDest != nType) {
if (nDest == typeSingle) if (nDest == typeSingle)
rFd->fSingle = float64_to_float32(rFd->fDouble); rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
else else
rFd->fDouble = float32_to_float64(rFd->fSingle); rFd->fDouble = float32_to_float64(rFd->fSingle);
} }
#endif #endif
} }
if (roundData.exception)
float_raise(roundData.exception);
return nRc; return nRc;
} }

View File

@ -96,7 +96,7 @@ static inline void loadMultiple(const unsigned int Fn, const unsigned int __user
} }
} }
static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem) static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
union { union {
@ -106,12 +106,12 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
switch (fpa11->fType[Fn]) { switch (fpa11->fType[Fn]) {
case typeDouble: case typeDouble:
val.f = float64_to_float32(fpa11->fpreg[Fn].fDouble); val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble);
break; break;
#ifdef CONFIG_FPE_NWFPE_XP #ifdef CONFIG_FPE_NWFPE_XP
case typeExtended: case typeExtended:
val.f = floatx80_to_float32(fpa11->fpreg[Fn].fExtended); val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended);
break; break;
#endif #endif
@ -122,7 +122,7 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
put_user(val.i[0], pMem); put_user(val.i[0], pMem);
} }
static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem) static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
union { union {
@ -137,7 +137,7 @@ static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem)
#ifdef CONFIG_FPE_NWFPE_XP #ifdef CONFIG_FPE_NWFPE_XP
case typeExtended: case typeExtended:
val.f = floatx80_to_float64(fpa11->fpreg[Fn].fExtended); val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended);
break; break;
#endif #endif
@ -259,8 +259,11 @@ unsigned int PerformSTF(const unsigned int opcode)
{ {
unsigned int __user *pBase, *pAddress, *pFinal; unsigned int __user *pBase, *pAddress, *pFinal;
unsigned int nRc = 1, write_back = WRITE_BACK(opcode); unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
struct roundingData roundData;
SetRoundingMode(ROUND_TO_NEAREST); roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
pBase = (unsigned int __user *) readRegister(getRn(opcode)); pBase = (unsigned int __user *) readRegister(getRn(opcode));
if (REG_PC == getRn(opcode)) { if (REG_PC == getRn(opcode)) {
@ -281,10 +284,10 @@ unsigned int PerformSTF(const unsigned int opcode)
switch (opcode & MASK_TRANSFER_LENGTH) { switch (opcode & MASK_TRANSFER_LENGTH) {
case TRANSFER_SINGLE: case TRANSFER_SINGLE:
storeSingle(getFd(opcode), pAddress); storeSingle(&roundData, getFd(opcode), pAddress);
break; break;
case TRANSFER_DOUBLE: case TRANSFER_DOUBLE:
storeDouble(getFd(opcode), pAddress); storeDouble(&roundData, getFd(opcode), pAddress);
break; break;
#ifdef CONFIG_FPE_NWFPE_XP #ifdef CONFIG_FPE_NWFPE_XP
case TRANSFER_EXTENDED: case TRANSFER_EXTENDED:
@ -295,6 +298,9 @@ unsigned int PerformSTF(const unsigned int opcode)
nRc = 0; nRc = 0;
} }
if (roundData.exception)
float_raise(roundData.exception);
if (write_back) if (write_back)
writeRegister(getRn(opcode), (unsigned long) pFinal); writeRegister(getRn(opcode), (unsigned long) pFinal);
return nRc; return nRc;

View File

@ -33,8 +33,6 @@ extern flag floatx80_is_nan(floatx80);
extern flag float64_is_nan(float64); extern flag float64_is_nan(float64);
extern flag float32_is_nan(float32); extern flag float32_is_nan(float32);
void SetRoundingMode(const unsigned int opcode);
unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFLT(const unsigned int opcode);
unsigned int PerformFIX(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode);
@ -77,14 +75,17 @@ unsigned int EmulateCPRT(const unsigned int opcode)
unsigned int PerformFLT(const unsigned int opcode) unsigned int PerformFLT(const unsigned int opcode)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
SetRoundingMode(opcode); struct roundingData roundData;
SetRoundingPrecision(opcode);
roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
switch (opcode & MASK_ROUNDING_PRECISION) { switch (opcode & MASK_ROUNDING_PRECISION) {
case ROUND_SINGLE: case ROUND_SINGLE:
{ {
fpa11->fType[getFn(opcode)] = typeSingle; fpa11->fType[getFn(opcode)] = typeSingle;
fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(readRegister(getRd(opcode))); fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode)));
} }
break; break;
@ -108,6 +109,9 @@ unsigned int PerformFLT(const unsigned int opcode)
return 0; return 0;
} }
if (roundData.exception)
float_raise(roundData.exception);
return 1; return 1;
} }
@ -115,26 +119,29 @@ unsigned int PerformFIX(const unsigned int opcode)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
unsigned int Fn = getFm(opcode); unsigned int Fn = getFm(opcode);
struct roundingData roundData;
SetRoundingMode(opcode); roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
switch (fpa11->fType[Fn]) { switch (fpa11->fType[Fn]) {
case typeSingle: case typeSingle:
{ {
writeRegister(getRd(opcode), float32_to_int32(fpa11->fpreg[Fn].fSingle)); writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle));
} }
break; break;
case typeDouble: case typeDouble:
{ {
writeRegister(getRd(opcode), float64_to_int32(fpa11->fpreg[Fn].fDouble)); writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble));
} }
break; break;
#ifdef CONFIG_FPE_NWFPE_XP #ifdef CONFIG_FPE_NWFPE_XP
case typeExtended: case typeExtended:
{ {
writeRegister(getRd(opcode), floatx80_to_int32(fpa11->fpreg[Fn].fExtended)); writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended));
} }
break; break;
#endif #endif
@ -143,6 +150,9 @@ unsigned int PerformFIX(const unsigned int opcode)
return 0; return 0;
} }
if (roundData.exception)
float_raise(roundData.exception);
return 1; return 1;
} }

View File

@ -116,8 +116,6 @@ fpmodule.c to integrate with the NetBSD kernel (I hope!).
code to access data in user space in some other source files at the code to access data in user space in some other source files at the
moment (grep for get_user / put_user calls). --philb] moment (grep for get_user / put_user calls). --philb]
float_exception_flags is a global variable in SoftFloat.
This function is called by the SoftFloat routines to raise a floating This function is called by the SoftFloat routines to raise a floating
point exception. We check the trap enable byte in the FPSR, and raise point exception. We check the trap enable byte in the FPSR, and raise
a SIGFPE exception if necessary. If not the relevant bits in the a SIGFPE exception if necessary. If not the relevant bits in the
@ -129,15 +127,14 @@ void float_raise(signed char flags)
register unsigned int fpsr, cumulativeTraps; register unsigned int fpsr, cumulativeTraps;
#ifdef CONFIG_DEBUG_USER #ifdef CONFIG_DEBUG_USER
printk(KERN_DEBUG /* Ignore inexact errors as there are far too many of them to log */
"NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", if (flags & ~BIT_IXC)
current->comm, current->pid, flags, printk(KERN_DEBUG
__builtin_return_address(0), GET_USERREG()->ARM_pc); "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
current->comm, current->pid, flags,
__builtin_return_address(0), GET_USERREG()->ARM_pc);
#endif #endif
/* Keep SoftFloat exception flags up to date. */
float_exception_flags |= flags;
/* Read fpsr and initialize the cumulativeTraps. */ /* Read fpsr and initialize the cumulativeTraps. */
fpsr = readFPSR(); fpsr = readFPSR();
cumulativeTraps = 0; cumulativeTraps = 0;

View File

@ -36,17 +36,17 @@ float32 float32_arccos(float32 rFm);
float32 float32_pow(float32 rFn, float32 rFm); float32 float32_pow(float32 rFn, float32 rFm);
float32 float32_pol(float32 rFn, float32 rFm); float32 float32_pol(float32 rFn, float32 rFm);
static float32 float32_rsf(float32 rFn, float32 rFm) static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm)
{ {
return float32_sub(rFm, rFn); return float32_sub(roundData, rFm, rFn);
} }
static float32 float32_rdv(float32 rFn, float32 rFm) static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm)
{ {
return float32_div(rFm, rFn); return float32_div(roundData, rFm, rFn);
} }
static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = { static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = {
[ADF_CODE >> 20] = float32_add, [ADF_CODE >> 20] = float32_add,
[MUF_CODE >> 20] = float32_mul, [MUF_CODE >> 20] = float32_mul,
[SUF_CODE >> 20] = float32_sub, [SUF_CODE >> 20] = float32_sub,
@ -60,22 +60,22 @@ static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = {
[FRD_CODE >> 20] = float32_rdv, [FRD_CODE >> 20] = float32_rdv,
}; };
static float32 float32_mvf(float32 rFm) static float32 float32_mvf(struct roundingData *roundData, float32 rFm)
{ {
return rFm; return rFm;
} }
static float32 float32_mnf(float32 rFm) static float32 float32_mnf(struct roundingData *roundData, float32 rFm)
{ {
return rFm ^ 0x80000000; return rFm ^ 0x80000000;
} }
static float32 float32_abs(float32 rFm) static float32 float32_abs(struct roundingData *roundData, float32 rFm)
{ {
return rFm & 0x7fffffff; return rFm & 0x7fffffff;
} }
static float32 (*const monadic_single[16])(float32 rFm) = { static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = {
[MVF_CODE >> 20] = float32_mvf, [MVF_CODE >> 20] = float32_mvf,
[MNF_CODE >> 20] = float32_mnf, [MNF_CODE >> 20] = float32_mnf,
[ABS_CODE >> 20] = float32_abs, [ABS_CODE >> 20] = float32_abs,
@ -85,7 +85,7 @@ static float32 (*const monadic_single[16])(float32 rFm) = {
[NRM_CODE >> 20] = float32_mvf, [NRM_CODE >> 20] = float32_mvf,
}; };
unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd) unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
{ {
FPA11 *fpa11 = GET_FPA11(); FPA11 *fpa11 = GET_FPA11();
float32 rFm; float32 rFm;
@ -108,13 +108,13 @@ unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd)
if (fpa11->fType[Fn] == typeSingle && if (fpa11->fType[Fn] == typeSingle &&
dyadic_single[opc_mask_shift]) { dyadic_single[opc_mask_shift]) {
rFn = fpa11->fpreg[Fn].fSingle; rFn = fpa11->fpreg[Fn].fSingle;
rFd->fSingle = dyadic_single[opc_mask_shift](rFn, rFm); rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm);
} else { } else {
return 0; return 0;
} }
} else { } else {
if (monadic_single[opc_mask_shift]) { if (monadic_single[opc_mask_shift]) {
rFd->fSingle = monadic_single[opc_mask_shift](rFm); rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm);
} else { } else {
return 0; return 0;
} }

File diff suppressed because it is too large Load Diff

View File

@ -74,7 +74,7 @@ enum {
Software IEC/IEEE floating-point rounding mode. Software IEC/IEEE floating-point rounding mode.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
extern signed char float_rounding_mode; //extern int8 float_rounding_mode;
enum { enum {
float_round_nearest_even = 0, float_round_nearest_even = 0,
float_round_to_zero = 1, float_round_to_zero = 1,
@ -86,7 +86,6 @@ enum {
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
Software IEC/IEEE floating-point exception flags. Software IEC/IEEE floating-point exception flags.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
extern signed char float_exception_flags;
enum { enum {
float_flag_inexact = 1, float_flag_inexact = 1,
float_flag_underflow = 2, float_flag_underflow = 2,
@ -99,7 +98,6 @@ ScottB: November 4, 1998
Changed the enumeration to match the bit order in the FPA11. Changed the enumeration to match the bit order in the FPA11.
*/ */
extern signed char float_exception_flags;
enum { enum {
float_flag_invalid = 1, float_flag_invalid = 1,
float_flag_divbyzero = 2, float_flag_divbyzero = 2,
@ -121,7 +119,7 @@ void float_raise( signed char );
Software IEC/IEEE integer-to-floating-point conversion routines. Software IEC/IEEE integer-to-floating-point conversion routines.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
float32 int32_to_float32( signed int ); float32 int32_to_float32( struct roundingData *, signed int );
float64 int32_to_float64( signed int ); float64 int32_to_float64( signed int );
#ifdef FLOATX80 #ifdef FLOATX80
floatx80 int32_to_floatx80( signed int ); floatx80 int32_to_floatx80( signed int );
@ -132,7 +130,7 @@ floatx80 int32_to_floatx80( signed int );
Software IEC/IEEE single-precision conversion routines. Software IEC/IEEE single-precision conversion routines.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
signed int float32_to_int32( float32 ); signed int float32_to_int32( struct roundingData *, float32 );
signed int float32_to_int32_round_to_zero( float32 ); signed int float32_to_int32_round_to_zero( float32 );
float64 float32_to_float64( float32 ); float64 float32_to_float64( float32 );
#ifdef FLOATX80 #ifdef FLOATX80
@ -144,13 +142,13 @@ floatx80 float32_to_floatx80( float32 );
Software IEC/IEEE single-precision operations. Software IEC/IEEE single-precision operations.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
float32 float32_round_to_int( float32 ); float32 float32_round_to_int( struct roundingData*, float32 );
float32 float32_add( float32, float32 ); float32 float32_add( struct roundingData *, float32, float32 );
float32 float32_sub( float32, float32 ); float32 float32_sub( struct roundingData *, float32, float32 );
float32 float32_mul( float32, float32 ); float32 float32_mul( struct roundingData *, float32, float32 );
float32 float32_div( float32, float32 ); float32 float32_div( struct roundingData *, float32, float32 );
float32 float32_rem( float32, float32 ); float32 float32_rem( struct roundingData *, float32, float32 );
float32 float32_sqrt( float32 ); float32 float32_sqrt( struct roundingData*, float32 );
char float32_eq( float32, float32 ); char float32_eq( float32, float32 );
char float32_le( float32, float32 ); char float32_le( float32, float32 );
char float32_lt( float32, float32 ); char float32_lt( float32, float32 );
@ -164,9 +162,9 @@ char float32_is_signaling_nan( float32 );
Software IEC/IEEE double-precision conversion routines. Software IEC/IEEE double-precision conversion routines.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
signed int float64_to_int32( float64 ); signed int float64_to_int32( struct roundingData *, float64 );
signed int float64_to_int32_round_to_zero( float64 ); signed int float64_to_int32_round_to_zero( float64 );
float32 float64_to_float32( float64 ); float32 float64_to_float32( struct roundingData *, float64 );
#ifdef FLOATX80 #ifdef FLOATX80
floatx80 float64_to_floatx80( float64 ); floatx80 float64_to_floatx80( float64 );
#endif #endif
@ -176,13 +174,13 @@ floatx80 float64_to_floatx80( float64 );
Software IEC/IEEE double-precision operations. Software IEC/IEEE double-precision operations.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
float64 float64_round_to_int( float64 ); float64 float64_round_to_int( struct roundingData *, float64 );
float64 float64_add( float64, float64 ); float64 float64_add( struct roundingData *, float64, float64 );
float64 float64_sub( float64, float64 ); float64 float64_sub( struct roundingData *, float64, float64 );
float64 float64_mul( float64, float64 ); float64 float64_mul( struct roundingData *, float64, float64 );
float64 float64_div( float64, float64 ); float64 float64_div( struct roundingData *, float64, float64 );
float64 float64_rem( float64, float64 ); float64 float64_rem( struct roundingData *, float64, float64 );
float64 float64_sqrt( float64 ); float64 float64_sqrt( struct roundingData *, float64 );
char float64_eq( float64, float64 ); char float64_eq( float64, float64 );
char float64_le( float64, float64 ); char float64_le( float64, float64 );
char float64_lt( float64, float64 ); char float64_lt( float64, float64 );
@ -198,31 +196,23 @@ char float64_is_signaling_nan( float64 );
Software IEC/IEEE extended double-precision conversion routines. Software IEC/IEEE extended double-precision conversion routines.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
signed int floatx80_to_int32( floatx80 ); signed int floatx80_to_int32( struct roundingData *, floatx80 );
signed int floatx80_to_int32_round_to_zero( floatx80 ); signed int floatx80_to_int32_round_to_zero( floatx80 );
float32 floatx80_to_float32( floatx80 ); float32 floatx80_to_float32( struct roundingData *, floatx80 );
float64 floatx80_to_float64( floatx80 ); float64 floatx80_to_float64( struct roundingData *, floatx80 );
/*
-------------------------------------------------------------------------------
Software IEC/IEEE extended double-precision rounding precision. Valid
values are 32, 64, and 80.
-------------------------------------------------------------------------------
*/
extern signed char floatx80_rounding_precision;
/* /*
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
Software IEC/IEEE extended double-precision operations. Software IEC/IEEE extended double-precision operations.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
*/ */
floatx80 floatx80_round_to_int( floatx80 ); floatx80 floatx80_round_to_int( struct roundingData *, floatx80 );
floatx80 floatx80_add( floatx80, floatx80 ); floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_sub( floatx80, floatx80 ); floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_mul( floatx80, floatx80 ); floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_div( floatx80, floatx80 ); floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_rem( floatx80, floatx80 ); floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_sqrt( floatx80 ); floatx80 floatx80_sqrt( struct roundingData *, floatx80 );
char floatx80_eq( floatx80, floatx80 ); char floatx80_eq( floatx80, floatx80 );
char floatx80_le( floatx80, floatx80 ); char floatx80_le( floatx80, floatx80 );
char floatx80_lt( floatx80, floatx80 ); char floatx80_lt( floatx80, floatx80 );

View File

@ -115,7 +115,7 @@ static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs)
return (tailaddr > stack) && (tailaddr < stack_base); return (tailaddr > stack) && (tailaddr < stack_base);
} }
void arm_backtrace(struct pt_regs const *regs, unsigned int depth) void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
{ {
struct frame_tail *tail; struct frame_tail *tail;
unsigned long last_address = 0; unsigned long last_address = 0;

View File

@ -770,6 +770,9 @@ vfp_double_add(struct vfp_double *vdd, struct vfp_double *vdn,
if ((s64)m_sig < 0) { if ((s64)m_sig < 0) {
vdd->sign = vfp_sign_negate(vdd->sign); vdd->sign = vfp_sign_negate(vdd->sign);
m_sig = -m_sig; m_sig = -m_sig;
} else if (m_sig == 0) {
vdd->sign = (fpscr & FPSCR_RMODE_MASK) ==
FPSCR_ROUND_MINUSINF ? 0x8000 : 0;
} }
} else { } else {
m_sig += vdn->significand; m_sig += vdn->significand;

View File

@ -176,12 +176,12 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
* Handle the "normal" cases first - successful and sigbus * Handle the "normal" cases first - successful and sigbus
*/ */
switch (fault) { switch (fault) {
case 2: case VM_FAULT_MAJOR:
tsk->maj_flt++; tsk->maj_flt++;
return fault; return fault;
case 1: case VM_FAULT_MINOR:
tsk->min_flt++; tsk->min_flt++;
case 0: case VM_FAULT_SIGBUS:
return fault; return fault;
} }
@ -226,14 +226,11 @@ int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
/* /*
* Handle the "normal" case first * Handle the "normal" case first
*/ */
if (fault > 0) switch (fault) {
case VM_FAULT_MINOR:
case VM_FAULT_MAJOR:
return 0; return 0;
case VM_FAULT_SIGBUS:
/*
* We had some memory, but were unable to
* successfully fix up this page fault.
*/
if (fault == 0){
goto do_sigbus; goto do_sigbus;
} }

View File

@ -284,13 +284,13 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
*/ */
switch (handle_mm_fault(mm, vma, address, writeaccess & 1)) { switch (handle_mm_fault(mm, vma, address, writeaccess & 1)) {
case 1: case VM_FAULT_MINOR:
tsk->min_flt++; tsk->min_flt++;
break; break;
case 2: case VM_FAULT_MAJOR:
tsk->maj_flt++; tsk->maj_flt++;
break; break;
case 0: case VM_FAULT_SIGBUS:
goto do_sigbus; goto do_sigbus;
default: default:
goto out_of_memory; goto out_of_memory;

View File

@ -163,13 +163,13 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
* the fault. * the fault.
*/ */
switch (handle_mm_fault(mm, vma, ear0, write)) { switch (handle_mm_fault(mm, vma, ear0, write)) {
case 1: case VM_FAULT_MINOR:
current->min_flt++; current->min_flt++;
break; break;
case 2: case VM_FAULT_MAJOR:
current->maj_flt++; current->maj_flt++;
break; break;
case 0: case VM_FAULT_SIGBUS:
goto do_sigbus; goto do_sigbus;
default: default:
goto out_of_memory; goto out_of_memory;

View File

@ -454,8 +454,9 @@ config HPET_TIMER
Choose N to continue using the legacy 8254 timer. Choose N to continue using the legacy 8254 timer.
config HPET_EMULATE_RTC config HPET_EMULATE_RTC
bool "Provide RTC interrupt" bool
depends on HPET_TIMER && RTC=y depends on HPET_TIMER && RTC=y
default y
config SMP config SMP
bool "Symmetric multi-processing support" bool "Symmetric multi-processing support"

View File

@ -442,6 +442,13 @@ acpi_cpufreq_cpu_init (
(u32) data->acpi_data.states[i].transition_latency); (u32) data->acpi_data.states[i].transition_latency);
cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
/*
* the first call to ->target() should result in us actually
* writing something to the appropriate registers.
*/
data->resume = 1;
return (result); return (result);
err_freqfree: err_freqfree:

View File

@ -76,6 +76,12 @@ static void __init init_transmeta(struct cpuinfo_x86 *c)
#define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV) #define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV)
if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 ) if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 )
c->x86 = 6; c->x86 = 6;
#ifdef CONFIG_SYSCTL
/* randomize_va_space slows us down enormously;
it probably triggers retranslation of x86->native bytecode */
randomize_va_space = 0;
#endif
} }
static void transmeta_identify(struct cpuinfo_x86 * c) static void transmeta_identify(struct cpuinfo_x86 * c)

View File

@ -251,7 +251,7 @@ ENTRY(sys_call_table)
.long sys_io_submit .long sys_io_submit
.long sys_io_cancel .long sys_io_cancel
.long sys_fadvise64 /* 250 */ .long sys_fadvise64 /* 250 */
.long sys_set_zone_reclaim .long sys_ni_syscall
.long sys_exit_group .long sys_exit_group
.long sys_lookup_dcookie .long sys_lookup_dcookie
.long sys_epoll_create .long sys_epoll_create

View File

@ -9,12 +9,15 @@
void (*pm_power_off)(void); void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off); EXPORT_SYMBOL(pm_power_off);
void machine_restart(char * __unused) void machine_shutdown(void)
{ {
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
smp_send_stop(); smp_send_stop();
#endif #endif
}
void machine_emergency_restart(void)
{
/* /*
* Visual Workstations restart after this * Visual Workstations restart after this
* register is poked on the PIIX4 * register is poked on the PIIX4
@ -22,6 +25,12 @@ void machine_restart(char * __unused)
outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT); outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
} }
void machine_restart(char * __unused)
{
machine_shutdown();
machine_emergency_restart();
}
void machine_power_off(void) void machine_power_off(void)
{ {
unsigned short pm_status; unsigned short pm_status;

View File

@ -14,6 +14,8 @@
#include "cobalt.h" #include "cobalt.h"
#include "piix4.h" #include "piix4.h"
int no_broadcast;
char visws_board_type = -1; char visws_board_type = -1;
char visws_board_rev = -1; char visws_board_rev = -1;

View File

@ -251,6 +251,12 @@ kb_wait(void)
break; break;
} }
void
machine_shutdown(void)
{
/* Architecture specific shutdown needed before a kexec */
}
void void
machine_restart(char *cmd) machine_restart(char *cmd)
{ {
@ -278,6 +284,13 @@ machine_restart(char *cmd)
} }
} }
void
machine_emergency_restart(void)
{
/*for now, just hook this to a warm restart */
machine_restart(NULL);
}
void void
mca_nmi_hook(void) mca_nmi_hook(void)
{ {

View File

@ -243,14 +243,6 @@ static unsigned long calculate_numa_remap_pages(void)
/* now the roundup is correct, convert to PAGE_SIZE pages */ /* now the roundup is correct, convert to PAGE_SIZE pages */
size = size * PTRS_PER_PTE; size = size * PTRS_PER_PTE;
if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) {
/*
* Adjust size if node_end_pfn is not on a proper
* pmd boundary. remap_numa_kva will barf otherwise.
*/
size += node_end_pfn[nid] & (PTRS_PER_PTE-1);
}
/* /*
* Validate the region we are allocating only contains valid * Validate the region we are allocating only contains valid
* pages. * pages.
@ -270,6 +262,17 @@ static unsigned long calculate_numa_remap_pages(void)
reserve_pages += size; reserve_pages += size;
printk("Shrinking node %d from %ld pages to %ld pages\n", printk("Shrinking node %d from %ld pages to %ld pages\n",
nid, node_end_pfn[nid], node_end_pfn[nid] - size); nid, node_end_pfn[nid], node_end_pfn[nid] - size);
if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) {
/*
* Align node_end_pfn[] and node_remap_start_pfn[] to
* pmd boundary. remap_numa_kva will barf otherwise.
*/
printk("Shrinking node %d further by %ld pages for proper alignment\n",
nid, node_end_pfn[nid] & (PTRS_PER_PTE-1));
size += node_end_pfn[nid] & (PTRS_PER_PTE-1);
}
node_end_pfn[nid] -= size; node_end_pfn[nid] -= size;
node_remap_start_pfn[nid] = node_end_pfn[nid]; node_remap_start_pfn[nid] = node_end_pfn[nid];
} }

View File

@ -30,6 +30,7 @@ static int __init pci_acpi_init(void)
acpi_irq_penalty_init(); acpi_irq_penalty_init();
pcibios_scanned++; pcibios_scanned++;
pcibios_enable_irq = acpi_pci_irq_enable; pcibios_enable_irq = acpi_pci_irq_enable;
pcibios_disable_irq = acpi_pci_irq_disable;
if (pci_routeirq) { if (pci_routeirq) {
/* /*

View File

@ -254,3 +254,9 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
return pcibios_enable_irq(dev); return pcibios_enable_irq(dev);
} }
void pcibios_disable_device (struct pci_dev *dev)
{
if (pcibios_disable_irq)
pcibios_disable_irq(dev);
}

View File

@ -56,6 +56,7 @@ struct irq_router_handler {
}; };
int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL; int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
/* /*
* Check passed address for the PCI IRQ Routing Table signature * Check passed address for the PCI IRQ Routing Table signature

View File

@ -73,3 +73,4 @@ extern int pcibios_scanned;
extern spinlock_t pci_config_lock; extern spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev); extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);

View File

@ -18,8 +18,10 @@
extern struct pci_raw_ops pci_direct_conf1; extern struct pci_raw_ops pci_direct_conf1;
static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; } static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
static void pci_visws_disable_irq(struct pci_dev *dev) { }
int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
void __init pcibios_penalize_isa_irq(int irq, int active) {} void __init pcibios_penalize_isa_irq(int irq, int active) {}

View File

@ -1573,7 +1573,7 @@ sys_call_table:
data8 sys_keyctl data8 sys_keyctl
data8 sys_ioprio_set data8 sys_ioprio_set
data8 sys_ioprio_get // 1275 data8 sys_ioprio_get // 1275
data8 sys_set_zone_reclaim data8 sys_ni_syscall
data8 sys_inotify_init data8 sys_inotify_init
data8 sys_inotify_add_watch data8 sys_inotify_add_watch
data8 sys_inotify_rm_watch data8 sys_inotify_rm_watch

View File

@ -179,7 +179,7 @@ static int can_do_pal_halt = 1;
static int __init nohalt_setup(char * str) static int __init nohalt_setup(char * str)
{ {
pal_halt = 0; pal_halt = can_do_pal_halt = 0;
return 1; return 1;
} }
__setup("nohalt", nohalt_setup); __setup("nohalt", nohalt_setup);

View File

@ -205,8 +205,7 @@ static long last_rtc_update = 0;
* timer_interrupt() needs to keep up the real-time clock, * timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick * as well as call the "do_timer()" routine every clocktick
*/ */
static inline void irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{ {
#ifndef CONFIG_SMP #ifndef CONFIG_SMP
profile_tick(CPU_PROFILING, regs); profile_tick(CPU_PROFILING, regs);
@ -221,6 +220,7 @@ do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
* CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
* called as close as possible to 500 ms before the new second starts. * called as close as possible to 500 ms before the new second starts.
*/ */
write_seqlock(&xtime_lock);
if ((time_status & STA_UNSYNC) == 0 if ((time_status & STA_UNSYNC) == 0
&& xtime.tv_sec > last_rtc_update + 660 && xtime.tv_sec > last_rtc_update + 660
&& (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2
@ -231,6 +231,7 @@ do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
else /* do it again in 60 s */ else /* do it again in 60 s */
last_rtc_update = xtime.tv_sec - 600; last_rtc_update = xtime.tv_sec - 600;
} }
write_sequnlock(&xtime_lock);
/* As we return to user mode fire off the other CPU schedulers.. /* As we return to user mode fire off the other CPU schedulers..
this is basically because we don't yet share IRQ's around. this is basically because we don't yet share IRQ's around.
This message is rigged to be safe on the 386 - basically it's This message is rigged to be safe on the 386 - basically it's
@ -238,14 +239,8 @@ do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
smp_local_timer_interrupt(regs); smp_local_timer_interrupt(regs);
smp_send_timer();
#endif #endif
}
irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
do_timer_interrupt(irq, NULL, regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED; return IRQ_HANDLED;
} }

View File

@ -160,13 +160,13 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
printk("handle_mm_fault returns %d\n",fault); printk("handle_mm_fault returns %d\n",fault);
#endif #endif
switch (fault) { switch (fault) {
case 1: case VM_FAULT_MINOR:
current->min_flt++; current->min_flt++;
break; break;
case 2: case VM_FAULT_MAJOR:
current->maj_flt++; current->maj_flt++;
break; break;
case 0: case VM_FAULT_SIGBUS:
goto bus_err; goto bus_err;
default: default:
goto out_of_memory; goto out_of_memory;

View File

@ -178,17 +178,17 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
*/ */
switch (handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) != 0)) { switch (handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) != 0)) {
case 1: case VM_FAULT_MINOR:
++current->min_flt; ++current->min_flt;
break; break;
case 2: case VM_FAULT_MAJOR:
++current->maj_flt; ++current->maj_flt;
break; break;
case 0: case VM_FAULT_SIGBUS:
/* /*
* We ran out of memory, or some other thing happened * We hit a hared mapping outside of the file, or some
* to us that made us unable to handle the page fault * other thing happened to us that made us unable to
* gracefully. * handle the page fault gracefully.
*/ */
goto bad_area; goto bad_area;
default: default:

View File

@ -69,9 +69,9 @@ config FEC_QS6612
config ENET_BIG_BUFFERS config ENET_BIG_BUFFERS
bool "Use Big CPM Ethernet Buffers" bool "Use Big CPM Ethernet Buffers"
depends on NET_ETHERNET depends on SCC_ENET || FEC_ENET
help help
Allocate large buffers for MPC8xx Etherenet. Increases throughput Allocate large buffers for MPC8xx Ethernet. Increases throughput
and decreases the likelihood of dropped packets, but costs memory. and decreases the likelihood of dropped packets, but costs memory.
config HTDMSOUND config HTDMSOUND

View File

@ -39,8 +39,6 @@
#include <asm/tlbflush.h> #include <asm/tlbflush.h>
#include <asm/rheap.h> #include <asm/rheap.h>
extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep);
static void m8xx_cpm_dpinit(void); static void m8xx_cpm_dpinit(void);
static uint host_buffer; /* One page of host buffer */ static uint host_buffer; /* One page of host buffer */
static uint host_end; /* end + 1 */ static uint host_end; /* end + 1 */
@ -108,14 +106,11 @@ struct hw_interrupt_type cpm_pic = {
.end = cpm_eoi, .end = cpm_eoi,
}; };
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
void void
m8xx_cpm_reset(uint bootpage) m8xx_cpm_reset(void)
{ {
volatile immap_t *imp; volatile immap_t *imp;
volatile cpm8xx_t *commproc; volatile cpm8xx_t *commproc;
pte_t *pte;
imp = (immap_t *)IMAP_ADDR; imp = (immap_t *)IMAP_ADDR;
commproc = (cpm8xx_t *)&imp->im_cpm; commproc = (cpm8xx_t *)&imp->im_cpm;
@ -143,17 +138,6 @@ m8xx_cpm_reset(uint bootpage)
/* Reclaim the DP memory for our use. */ /* Reclaim the DP memory for our use. */
m8xx_cpm_dpinit(); m8xx_cpm_dpinit();
/* get the PTE for the bootpage */
if (!get_pteptr(&init_mm, bootpage, &pte))
panic("get_pteptr failed\n");
/* and make it uncachable */
pte_val(*pte) |= _PAGE_NO_CACHE;
_tlbie(bootpage);
host_buffer = bootpage;
host_end = host_buffer + PAGE_SIZE;
/* Tell everyone where the comm processor resides. /* Tell everyone where the comm processor resides.
*/ */
cpmp = (cpm8xx_t *)commproc; cpmp = (cpm8xx_t *)commproc;
@ -384,8 +368,6 @@ static rh_info_t cpm_dpmem_info;
void m8xx_cpm_dpinit(void) void m8xx_cpm_dpinit(void)
{ {
cpm8xx_t *cp = &((immap_t *)IMAP_ADDR)->im_cpm;
spin_lock_init(&cpm_dpmem_lock); spin_lock_init(&cpm_dpmem_lock);
/* Initialize the info header */ /* Initialize the info header */

View File

@ -173,7 +173,7 @@ struct fec_enet_private {
uint phy_status; uint phy_status;
uint phy_speed; uint phy_speed;
phy_info_t *phy; phy_info_t *phy;
struct tq_struct phy_task; struct work_struct phy_task;
uint sequence_done; uint sequence_done;
@ -199,7 +199,8 @@ static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
#ifdef CONFIG_USE_MDIO #ifdef CONFIG_USE_MDIO
static void fec_enet_mii(struct net_device *dev); static void fec_enet_mii(struct net_device *dev);
#endif /* CONFIG_USE_MDIO */ #endif /* CONFIG_USE_MDIO */
static void fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs); static irqreturn_t fec_enet_interrupt(int irq, void * dev_id,
struct pt_regs * regs);
#ifdef CONFIG_FEC_PACKETHOOK #ifdef CONFIG_FEC_PACKETHOOK
static void fec_enet_tx(struct net_device *dev, __u32 regval); static void fec_enet_tx(struct net_device *dev, __u32 regval);
static void fec_enet_rx(struct net_device *dev, __u32 regval); static void fec_enet_rx(struct net_device *dev, __u32 regval);
@ -471,7 +472,7 @@ fec_timeout(struct net_device *dev)
/* The interrupt handler. /* The interrupt handler.
* This is called from the MPC core interrupt. * This is called from the MPC core interrupt.
*/ */
static void static irqreturn_t
fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs)
{ {
struct net_device *dev = dev_id; struct net_device *dev = dev_id;
@ -525,6 +526,7 @@ printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTIO
} }
} }
return IRQ_RETVAL(IRQ_HANDLED);
} }
@ -1263,8 +1265,9 @@ static void mii_display_status(struct net_device *dev)
printk(".\n"); printk(".\n");
} }
static void mii_display_config(struct net_device *dev) static void mii_display_config(void *priv)
{ {
struct net_device *dev = (struct net_device *)priv;
struct fec_enet_private *fep = dev->priv; struct fec_enet_private *fep = dev->priv;
volatile uint *s = &(fep->phy_status); volatile uint *s = &(fep->phy_status);
@ -1294,8 +1297,9 @@ static void mii_display_config(struct net_device *dev)
fep->sequence_done = 1; fep->sequence_done = 1;
} }
static void mii_relink(struct net_device *dev) static void mii_relink(void *priv)
{ {
struct net_device *dev = (struct net_device *)priv;
struct fec_enet_private *fep = dev->priv; struct fec_enet_private *fep = dev->priv;
int duplex; int duplex;
@ -1323,18 +1327,16 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev)
{ {
struct fec_enet_private *fep = dev->priv; struct fec_enet_private *fep = dev->priv;
fep->phy_task.routine = (void *)mii_relink; INIT_WORK(&fep->phy_task, mii_relink, (void *)dev);
fep->phy_task.data = dev; schedule_work(&fep->phy_task);
schedule_task(&fep->phy_task);
} }
static void mii_queue_config(uint mii_reg, struct net_device *dev) static void mii_queue_config(uint mii_reg, struct net_device *dev)
{ {
struct fec_enet_private *fep = dev->priv; struct fec_enet_private *fep = dev->priv;
fep->phy_task.routine = (void *)mii_display_config; INIT_WORK(&fep->phy_task, mii_display_config, (void *)dev);
fep->phy_task.data = dev; schedule_work(&fep->phy_task);
schedule_task(&fep->phy_task);
} }
@ -1403,11 +1405,11 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
/* This interrupt occurs when the PHY detects a link change. /* This interrupt occurs when the PHY detects a link change.
*/ */
static void static
#ifdef CONFIG_RPXCLASSIC #ifdef CONFIG_RPXCLASSIC
mii_link_interrupt(void *dev_id) void mii_link_interrupt(void *dev_id)
#else #else
mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) irqreturn_t mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
#endif #endif
{ {
#ifdef CONFIG_USE_MDIO #ifdef CONFIG_USE_MDIO
@ -1440,6 +1442,9 @@ mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__); printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
#endif /* CONFIG_USE_MDIO */ #endif /* CONFIG_USE_MDIO */
#ifndef CONFIG_RPXCLASSIC
return IRQ_RETVAL(IRQ_HANDLED);
#endif /* CONFIG_RPXCLASSIC */
} }
static int static int
@ -1575,7 +1580,7 @@ static int __init fec_enet_init(void)
struct fec_enet_private *fep; struct fec_enet_private *fep;
int i, j, k, err; int i, j, k, err;
unsigned char *eap, *iap, *ba; unsigned char *eap, *iap, *ba;
unsigned long mem_addr; dma_addr_t mem_addr;
volatile cbd_t *bdp; volatile cbd_t *bdp;
cbd_t *cbd_base; cbd_t *cbd_base;
volatile immap_t *immap; volatile immap_t *immap;
@ -1640,7 +1645,8 @@ static int __init fec_enet_init(void)
printk("FEC initialization failed.\n"); printk("FEC initialization failed.\n");
return 1; return 1;
} }
cbd_base = (cbd_t *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE,
&mem_addr, GFP_KERNEL);
/* Set receive and transmit descriptor base. /* Set receive and transmit descriptor base.
*/ */
@ -1657,7 +1663,10 @@ static int __init fec_enet_init(void)
/* Allocate a page. /* Allocate a page.
*/ */
ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev,
PAGE_SIZE,
&mem_addr,
GFP_KERNEL);
/* BUG: no check for failure */ /* BUG: no check for failure */
/* Initialize the BD for every fragment in the page. /* Initialize the BD for every fragment in the page.

View File

@ -558,6 +558,7 @@ config PPC_MULTIPLATFORM
config APUS config APUS
bool "Amiga-APUS" bool "Amiga-APUS"
depends on BROKEN
help help
Select APUS if configuring for a PowerUP Amiga. Select APUS if configuring for a PowerUP Amiga.
More information is available at: More information is available at:
@ -647,6 +648,7 @@ config PAL4
config GEMINI config GEMINI
bool "Synergy-Gemini" bool "Synergy-Gemini"
depends on BROKEN
help help
Select Gemini if configuring for a Synergy Microsystems' Gemini Select Gemini if configuring for a Synergy Microsystems' Gemini
series Single Board Computer. More information is available at: series Single Board Computer. More information is available at:

View File

@ -61,6 +61,12 @@ zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE
end-$(CONFIG_EMBEDDEDBOOT) := embedded end-$(CONFIG_EMBEDDEDBOOT) := embedded
misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o
zimage-$(CONFIG_BAMBOO) := zImage-TREE
zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE
end-$(CONFIG_BAMBOO) := bamboo
entrypoint-$(CONFIG_BAMBOO) := 0x01000000
extra.o-$(CONFIG_BAMBOO) := pibs.o
zimage-$(CONFIG_EBONY) := zImage-TREE zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
end-$(CONFIG_EBONY) := ebony end-$(CONFIG_EBONY) := ebony

View File

@ -91,9 +91,11 @@ load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16); mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16);
memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6); memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6);
#ifdef CONFIG_440GX #if defined(CONFIG_440GX) || defined(CONFIG_440EP)
mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16); mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16);
memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6); memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6);
#endif
#ifdef CONFIG_440GX
mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16); mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16);
memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6); memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6);
mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16); mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16);

View File

@ -0,0 +1,943 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12
# Tue Jun 28 15:24:25 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
CONFIG_44x=y
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
CONFIG_4xx=y
#
# IBM 4xx options
#
CONFIG_BAMBOO=y
# CONFIG_EBONY is not set
# CONFIG_LUAN is not set
# CONFIG_OCOTEA is not set
CONFIG_440EP=y
CONFIG_440=y
CONFIG_IBM440EP_ERR42=y
CONFIG_IBM_OCP=y
# CONFIG_PPC4xx_DMA is not set
CONFIG_PPC_GEN550=y
# CONFIG_PM is not set
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
# CONFIG_PC_KEYBOARD is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x01000000
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_EMAC=y
# CONFIG_IBM_EMAC_ERRMSG is not set
CONFIG_IBM_EMAC_RXB=64
CONFIG_IBM_EMAC_TXB=8
CONFIG_IBM_EMAC_FGAP=8
CONFIG_IBM_EMAC_SKBRES=0
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_KGDB is not set
# CONFIG_XMON is not set
CONFIG_BDI_SWITCH=y
# CONFIG_SERIAL_TEXT_DEBUG is not set
CONFIG_PPC_OCP=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#

View File

@ -852,6 +852,26 @@ struct cpu_spec cpu_specs[] = {
#endif /* CONFIG_40x */ #endif /* CONFIG_40x */
#ifdef CONFIG_44x #ifdef CONFIG_44x
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000850,
.cpu_name = "440EP Rev. A",
.cpu_features = CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB,
.cpu_user_features = COMMON_PPC, /* 440EP has an FPU */
.icache_bsize = 32,
.dcache_bsize = 32,
},
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x400008d3,
.cpu_name = "440EP Rev. B",
.cpu_features = CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB,
.cpu_user_features = COMMON_PPC, /* 440EP has an FPU */
.icache_bsize = 32,
.dcache_bsize = 32,
},
{ /* 440GP Rev. B */ { /* 440GP Rev. B */
.pvr_mask = 0xf0000fff, .pvr_mask = 0xf0000fff,
.pvr_value = 0x40000440, .pvr_value = 0x40000440,

View File

@ -215,6 +215,7 @@ syscall_dotrace_cont:
lwzx r10,r10,r0 /* Fetch system call handler [ptr] */ lwzx r10,r10,r0 /* Fetch system call handler [ptr] */
mtlr r10 mtlr r10
addi r9,r1,STACK_FRAME_OVERHEAD addi r9,r1,STACK_FRAME_OVERHEAD
PPC440EP_ERR42
blrl /* Call handler */ blrl /* Call handler */
.globl ret_from_syscall .globl ret_from_syscall
ret_from_syscall: ret_from_syscall:

View File

@ -179,24 +179,26 @@ skpinv: addi r4,r4,1 /* Increment */
4: 4:
#ifdef CONFIG_SERIAL_TEXT_DEBUG #ifdef CONFIG_SERIAL_TEXT_DEBUG
/* /*
* Add temporary UART mapping for early debug. This * Add temporary UART mapping for early debug.
* mapping must be identical to that used by the early * We can map UART registers wherever we want as long as they don't
* bootloader code since the same asm/serial.h parameters * interfere with other system mappings (e.g. with pinned entries).
* are used for polled operation. * For an example of how we handle this - see ocotea.h. --ebs
*/ */
/* pageid fields */ /* pageid fields */
lis r3,UART0_IO_BASE@h lis r3,UART0_IO_BASE@h
ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
/* xlat fields */ /* xlat fields */
lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */
#ifndef CONFIG_440EP
ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */ ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */
#endif
/* attrib fields */ /* attrib fields */
li r5,0 li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G) ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
li r0,1 /* TLB slot 1 */ li r0,0 /* TLB slot 0 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
@ -228,6 +230,16 @@ skpinv: addi r4,r4,1 /* Increment */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4 mtspr SPRN_IVPR,r4
#ifdef CONFIG_440EP
/* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
mfspr r2,SPRN_CCR0
lis r3,0xffef
ori r3,r3,0xffff
and r2,r2,r3
mtspr SPRN_CCR0,r2
isync
#endif
/* /*
* This is where the main kernel code starts. * This is where the main kernel code starts.
*/ */

View File

@ -1145,6 +1145,7 @@ _GLOBAL(kernel_thread)
stwu r0,-16(r1) stwu r0,-16(r1)
mtlr r30 /* fn addr in lr */ mtlr r30 /* fn addr in lr */
mr r3,r31 /* load arg and call fn */ mr r3,r31 /* load arg and call fn */
PPC440EP_ERR42
blrl blrl
li r0,__NR_exit /* exit if function returns */ li r0,__NR_exit /* exit if function returns */
li r3,0 li r3,0
@ -1451,3 +1452,6 @@ _GLOBAL(sys_call_table)
.long sys_waitid .long sys_waitid
.long sys_ioprio_set .long sys_ioprio_set
.long sys_ioprio_get .long sys_ioprio_get
.long sys_inotify_init /* 275 */
.long sys_inotify_add_watch
.long sys_inotify_rm_watch

View File

@ -160,6 +160,21 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
} }
EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_resource_to_bus);
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
unsigned long offset = 0;
struct pci_controller *hose = dev->sysdata;
if (hose && res->flags & IORESOURCE_IO)
offset = (unsigned long)hose->io_base_virt - isa_io_base;
else if (hose && res->flags & IORESOURCE_MEM)
offset = hose->pci_mem_offset;
res->start = region->start + offset;
res->end = region->end + offset;
}
EXPORT_SYMBOL(pcibios_bus_to_resource);
/* /*
* We need to avoid collisions with `mirrored' VGA ports * We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the * and other strange ISA hardware, so we always want the

View File

@ -324,7 +324,7 @@ EXPORT_SYMBOL(__res);
EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context); EXPORT_SYMBOL(set_context);
EXPORT_SYMBOL(handle_mm_fault); /* For MOL */ EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */
EXPORT_SYMBOL(disarm_decr); EXPORT_SYMBOL(disarm_decr);
#ifdef CONFIG_PPC_STD_MMU #ifdef CONFIG_PPC_STD_MMU
extern long mol_trampoline; extern long mol_trampoline;

View File

@ -68,6 +68,11 @@ choice
depends on 44x depends on 44x
default EBONY default EBONY
config BAMBOO
bool "Bamboo"
help
This option enables support for the IBM PPC440EP evaluation board.
config EBONY config EBONY
bool "Ebony" bool "Ebony"
help help
@ -98,6 +103,12 @@ config NP405H
depends on ASH depends on ASH
default y default y
config 440EP
bool
depends on BAMBOO
select PPC_FPU
default y
config 440GP config 440GP
bool bool
depends on EBONY depends on EBONY
@ -115,7 +126,7 @@ config 440SP
config 440 config 440
bool bool
depends on 440GP || 440SP depends on 440GP || 440SP || 440EP
default y default y
config 440A config 440A
@ -123,6 +134,11 @@ config 440A
depends on 440GX depends on 440GX
default y default y
config IBM440EP_ERR42
bool
depends on 440EP
default y
# All 405-based cores up until the 405GPR and 405EP have this errata. # All 405-based cores up until the 405GPR and 405EP have this errata.
config IBM405_ERR77 config IBM405_ERR77
bool bool
@ -142,7 +158,7 @@ config BOOKE
config IBM_OCP config IBM_OCP
bool bool
depends on ASH || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
default y default y
config XILINX_OCP config XILINX_OCP

View File

@ -2,6 +2,7 @@
# Makefile for the PowerPC 4xx linux kernel. # Makefile for the PowerPC 4xx linux kernel.
obj-$(CONFIG_ASH) += ash.o obj-$(CONFIG_ASH) += ash.o
obj-$(CONFIG_BAMBOO) += bamboo.o
obj-$(CONFIG_CPCI405) += cpci405.o obj-$(CONFIG_CPCI405) += cpci405.o
obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_EP405) += ep405.o
@ -19,6 +20,7 @@ obj-$(CONFIG_405GP) += ibm405gp.o
obj-$(CONFIG_REDWOOD_5) += ibmstb4.o obj-$(CONFIG_REDWOOD_5) += ibmstb4.o
obj-$(CONFIG_NP405H) += ibmnp405h.o obj-$(CONFIG_NP405H) += ibmnp405h.o
obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o
obj-$(CONFIG_440EP) += ibm440ep.o
obj-$(CONFIG_440GP) += ibm440gp.o obj-$(CONFIG_440GP) += ibm440gp.o
obj-$(CONFIG_440GX) += ibm440gx.o obj-$(CONFIG_440GX) += ibm440gx.o
obj-$(CONFIG_440SP) += ibm440sp.o obj-$(CONFIG_440SP) += ibm440sp.o

View File

@ -0,0 +1,427 @@
/*
* arch/ppc/platforms/4xx/bamboo.c
*
* Bamboo board specific routines
*
* Wade Farnsworth <wfarnsworth@mvista.com>
* Copyright 2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/ethtool.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ocp.h>
#include <asm/pci-bridge.h>
#include <asm/time.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <asm/ppc4xx_pic.h>
#include <asm/ppcboot.h>
#include <syslib/gen550.h>
#include <syslib/ibm440gx_common.h>
/*
* This is a horrible kludge, we eventually need to abstract this
* generic PHY stuff, so the standard phy mode defines can be
* easily used from arch code.
*/
#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
bd_t __res;
static struct ibm44x_clocks clocks __initdata;
/*
* Bamboo external IRQ triggering/polarity settings
*/
unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
};
static void __init
bamboo_calibrate_decr(void)
{
unsigned int freq;
if (mfspr(SPRN_CCR1) & CCR1_TCS)
freq = BAMBOO_TMRCLK;
else
freq = clocks.cpu;
ibm44x_calibrate_decr(freq);
}
static int
bamboo_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: IBM\n");
seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
return 0;
}
static inline int
bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 28, 28, 28, 28 }, /* IDSEL 1 - PCI Slot 0 */
{ 27, 27, 27, 27 }, /* IDSEL 2 - PCI Slot 1 */
{ 26, 26, 26, 26 }, /* IDSEL 3 - PCI Slot 2 */
{ 25, 25, 25, 25 }, /* IDSEL 4 - PCI Slot 3 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
static void __init bamboo_set_emacdata(void)
{
unsigned char * selection1_base;
struct ocp_def *def;
struct ocp_func_emac_data *emacdata;
u8 selection1_val;
int mode;
selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
selection1_val = readb(selection1_base);
iounmap((void *) selection1_base);
if (BAMBOO_SEL_MII(selection1_val))
mode = PHY_MODE_MII;
else if (BAMBOO_SEL_RMII(selection1_val))
mode = PHY_MODE_RMII;
else
mode = PHY_MODE_SMII;
/* Set mac_addr and phy mode for each EMAC */
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
emacdata = def->additions;
memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
emacdata->phy_mode = mode;
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
emacdata = def->additions;
memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
emacdata->phy_mode = mode;
}
static int
bamboo_exclude_device(unsigned char bus, unsigned char devfn)
{
return (bus == 0 && devfn == 0);
}
#define PCI_READW(offset) \
(readw((void *)((u32)pci_reg_base+offset)))
#define PCI_WRITEW(value, offset) \
(writew(value, (void *)((u32)pci_reg_base+offset)))
#define PCI_WRITEL(value, offset) \
(writel(value, (void *)((u32)pci_reg_base+offset)))
static void __init
bamboo_setup_pci(void)
{
void *pci_reg_base;
unsigned long memory_size;
memory_size = ppc_md.find_end_of_memory();
pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
/* Enable PCI I/O, Mem, and Busmaster cycles */
PCI_WRITEW(PCI_READW(PCI_COMMAND) |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER, PCI_COMMAND);
/* Disable region first */
PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
/* PLB starting addr: 0x00000000A0000000 */
PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
/* PCI start addr, 0xA0000000 (PCI Address) */
PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
/* Enable no pre-fetch, enable region */
PCI_WRITEL(((0xffffffff -
(BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
BAMBOO_PCIL0_PMM0MA);
/* Disable region one */
PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
/* Disable region two */
PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
/* Now configure the PCI->PLB windows, we only use PTM1
*
* For Inbound flow, set the window size to all available memory
* This is required because if size is smaller,
* then Eth/PCI DD would fail as PCI card not able to access
* the memory allocated by DD.
*/
PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS); /* disabled region 1 */
PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA); /* begin of address map */
memory_size = 1 << fls(memory_size - 1);
/* Size low + Enabled */
PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
eieio();
iounmap(pci_reg_base);
}
static void __init
bamboo_setup_hose(void)
{
unsigned int bar_response, bar;
struct pci_controller *hose;
bamboo_setup_pci();
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->first_busno = 0;
hose->last_busno = 0xff;
hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
pci_init_resource(&hose->io_resource,
BAMBOO_PCI_LOWER_IO,
BAMBOO_PCI_UPPER_IO,
IORESOURCE_IO,
"PCI host bridge");
pci_init_resource(&hose->mem_resources[0],
BAMBOO_PCI_LOWER_MEM,
BAMBOO_PCI_UPPER_MEM,
IORESOURCE_MEM,
"PCI host bridge");
ppc_md.pci_exclude_device = bamboo_exclude_device;
hose->io_space.start = BAMBOO_PCI_LOWER_IO;
hose->io_space.end = BAMBOO_PCI_UPPER_IO;
hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
isa_io_base =
(unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
hose->io_base_virt = (void *)isa_io_base;
setup_indirect_pci(hose,
BAMBOO_PCI_CFGA_PLB32,
BAMBOO_PCI_CFGD_PLB32);
hose->set_cfg_type = 1;
/* Zero config bars */
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_write_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
0x00000000);
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
}
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = bamboo_map_irq;
}
TODC_ALLOC();
static void __init
bamboo_early_serial_map(void)
{
struct uart_port port;
/* Setup ioremapped serial port access */
memset(&port, 0, sizeof(port));
port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
port.iotype = SERIAL_IO_MEM;
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 0 failed\n");
}
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
/* Configure debug serial access */
gen550_init(0, &port);
#endif
port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
port.irq = 1;
port.uartclk = clocks.uart1;
port.line = 1;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 1 failed\n");
}
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
/* Configure debug serial access */
gen550_init(1, &port);
#endif
port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
port.irq = 3;
port.uartclk = clocks.uart2;
port.line = 2;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 2 failed\n");
}
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
/* Configure debug serial access */
gen550_init(2, &port);
#endif
port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
port.irq = 4;
port.uartclk = clocks.uart3;
port.line = 3;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 3 failed\n");
}
}
static void __init
bamboo_setup_arch(void)
{
bamboo_set_emacdata();
ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
ocp_sys_info.opb_bus_freq = clocks.opb;
/* Setup TODC access */
TODC_INIT(TODC_TYPE_DS1743,
0,
0,
ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
8);
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
/* Setup PCI host bridge */
bamboo_setup_hose();
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
bamboo_early_serial_map();
/* Identify the system */
printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
}
void __init platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7)
{
parse_bootinfo(find_bootinfo());
/*
* If we were passed in a board information, copy it into the
* residual data area.
*/
if (r3)
__res = *(bd_t *)(r3 + KERNELBASE);
ibm44x_platform_init();
ppc_md.setup_arch = bamboo_setup_arch;
ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
ppc_md.calibrate_decr = bamboo_calibrate_decr;
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#ifdef CONFIG_KGDB
ppc_md.early_serial_map = bamboo_early_serial_map;
#endif
}

View File

@ -0,0 +1,136 @@
/*
* arch/ppc/platforms/bamboo.h
*
* Bamboo board definitions
*
* Wade Farnsworth <wfarnsworth@mvista.com>
*
* Copyright 2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __ASM_BAMBOO_H__
#define __ASM_BAMBOO_H__
#include <linux/config.h>
#include <platforms/4xx/ibm440ep.h>
/* F/W TLB mapping used in bootloader glue to reset EMAC */
#define PPC44x_EMAC0_MR0 0x0EF600E00
/* Location of MAC addresses in PIBS image */
#define PIBS_FLASH_BASE 0xfff00000
#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xc0400)
#define PIBS_MAC_SIZE 0x200
#define PIBS_MAC_OFFSET 0x100
/* Default clock rate */
#define BAMBOO_TMRCLK 25000000
/* RTC/NVRAM location */
#define BAMBOO_RTC_ADDR 0x080000000ULL
#define BAMBOO_RTC_SIZE 0x2000
/* FPGA Registers */
#define BAMBOO_FPGA_ADDR 0x080002000ULL
#define BAMBOO_FPGA_CONFIG2_REG_ADDR (BAMBOO_FPGA_ADDR + 0x1)
#define BAMBOO_FULL_DUPLEX_EN(x) (x & 0x08)
#define BAMBOO_FORCE_100Mbps(x) (x & 0x04)
#define BAMBOO_AUTONEGOTIATE(x) (x & 0x02)
#define BAMBOO_FPGA_SETTING_REG_ADDR (BAMBOO_FPGA_ADDR + 0x3)
#define BAMBOO_BOOT_SMALL_FLASH(x) (!(x & 0x80))
#define BAMBOO_LARGE_FLASH_EN(x) (!(x & 0x40))
#define BAMBOO_BOOT_NAND_FLASH(x) (!(x & 0x20))
#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
#define BAMBOO_SEL_MII(x) (x & 0x80)
#define BAMBOO_SEL_RMII(x) (x & 0x40)
#define BAMBOO_SEL_SMII(x) (x & 0x20)
/* Flash */
#define BAMBOO_SMALL_FLASH_LOW 0x087f00000ULL
#define BAMBOO_SMALL_FLASH_HIGH 0x0fff00000ULL
#define BAMBOO_SMALL_FLASH_SIZE 0x100000
#define BAMBOO_LARGE_FLASH_LOW 0x087800000ULL
#define BAMBOO_LARGE_FLASH_HIGH1 0x0ff800000ULL
#define BAMBOO_LARGE_FLASH_HIGH2 0x0ffc00000ULL
#define BAMBOO_LARGE_FLASH_SIZE 0x400000
#define BAMBOO_SRAM_LOW 0x087f00000ULL
#define BAMBOO_SRAM_HIGH1 0x0fff00000ULL
#define BAMBOO_SRAM_HIGH2 0x0ff800000ULL
#define BAMBOO_SRAM_SIZE 0x100000
#define BAMBOO_NAND_FLASH_REG_ADDR 0x090000000ULL
#define BAMBOO_NAND_FLASH_REG_SIZE 0x2000
/*
* Serial port defines
*/
#define RS_TABLE_SIZE 4
#define UART0_IO_BASE 0xEF600300
#define UART1_IO_BASE 0xEF600400
#define UART2_IO_BASE 0xEF600500
#define UART3_IO_BASE 0xEF600600
#define BASE_BAUD 33177600/3/16
#define UART0_INT 0
#define UART1_INT 1
#define UART2_INT 3
#define UART3_INT 4
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1) \
STD_UART_OP(2) \
STD_UART_OP(3)
/* PCI support */
#define BAMBOO_PCI_CFGA_PLB32 0xeec00000
#define BAMBOO_PCI_CFGD_PLB32 0xeec00004
#define BAMBOO_PCI_IO_BASE 0x00000000e8000000ULL
#define BAMBOO_PCI_IO_SIZE 0x00010000
#define BAMBOO_PCI_MEM_OFFSET 0x00000000
#define BAMBOO_PCI_PHY_MEM_BASE 0x00000000a0000000ULL
#define BAMBOO_PCI_LOWER_IO 0x00000000
#define BAMBOO_PCI_UPPER_IO 0x0000ffff
#define BAMBOO_PCI_LOWER_MEM 0xa0000000
#define BAMBOO_PCI_UPPER_MEM 0xafffffff
#define BAMBOO_PCI_MEM_BASE 0xa0000000
#define BAMBOO_PCIL0_BASE 0x00000000ef400000ULL
#define BAMBOO_PCIL0_SIZE 0x40
#define BAMBOO_PCIL0_PMM0LA 0x000
#define BAMBOO_PCIL0_PMM0MA 0x004
#define BAMBOO_PCIL0_PMM0PCILA 0x008
#define BAMBOO_PCIL0_PMM0PCIHA 0x00C
#define BAMBOO_PCIL0_PMM1LA 0x010
#define BAMBOO_PCIL0_PMM1MA 0x014
#define BAMBOO_PCIL0_PMM1PCILA 0x018
#define BAMBOO_PCIL0_PMM1PCIHA 0x01C
#define BAMBOO_PCIL0_PMM2LA 0x020
#define BAMBOO_PCIL0_PMM2MA 0x024
#define BAMBOO_PCIL0_PMM2PCILA 0x028
#define BAMBOO_PCIL0_PMM2PCIHA 0x02C
#define BAMBOO_PCIL0_PTM1MS 0x030
#define BAMBOO_PCIL0_PTM1LA 0x034
#define BAMBOO_PCIL0_PTM2MS 0x038
#define BAMBOO_PCIL0_PTM2LA 0x03C
#endif /* __ASM_BAMBOO_H__ */
#endif /* __KERNEL__ */

View File

@ -7,7 +7,7 @@
* Copyright 2002-2005 MontaVista Software Inc. * Copyright 2002-2005 MontaVista Software Inc.
* *
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies * Copyright (c) 2003-2005 Zultys Technologies
* *
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the * under the terms of the GNU General Public License as published by the
@ -50,6 +50,7 @@
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <asm/ppc4xx_pic.h> #include <asm/ppc4xx_pic.h>
#include <asm/ppcboot.h> #include <asm/ppcboot.h>
#include <asm/tlbflush.h>
#include <syslib/gen550.h> #include <syslib/gen550.h>
#include <syslib/ibm440gp_common.h> #include <syslib/ibm440gp_common.h>
@ -248,6 +249,9 @@ ebony_early_serial_map(void)
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
/* Configure debug serial access */ /* Configure debug serial access */
gen550_init(0, &port); gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
_tlbie(UART0_IO_BASE);
#endif #endif
port.membase = ioremap64(PPC440GP_UART1_ADDR, 8); port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);

View File

@ -56,9 +56,18 @@
* Serial port defines * Serial port defines
*/ */
/* OpenBIOS defined UART mappings, used before early_serial_setup */ #if defined(__BOOTER__)
/* OpenBIOS defined UART mappings, used by bootloader shim */
#define UART0_IO_BASE 0xE0000200 #define UART0_IO_BASE 0xE0000200
#define UART1_IO_BASE 0xE0000300 #define UART1_IO_BASE 0xE0000300
#else
/* head_44x.S created UART mapping, used before early_serial_setup.
* We cannot use default OpenBIOS UART mappings because they
* don't work for configurations with more than 512M RAM. --ebs
*/
#define UART0_IO_BASE 0xF0000200
#define UART1_IO_BASE 0xF0000300
#endif
/* external Epson SG-615P */ /* external Epson SG-615P */
#define BASE_BAUD 691200 #define BASE_BAUD 691200
@ -66,7 +75,7 @@
#define STD_UART_OP(num) \ #define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \ { 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \ iomem_base: (void*)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM}, io_type: SERIAL_IO_MEM},
#define SERIAL_PORT_DFNS \ #define SERIAL_PORT_DFNS \

View File

@ -0,0 +1,220 @@
/*
* arch/ppc/platforms/4xx/ibm440ep.c
*
* PPC440EP I/O descriptions
*
* Wade Farnsworth <wfarnsworth@mvista.com>
* Copyright 2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <platforms/4xx/ibm440ep.h>
#include <asm/ocp.h>
#include <asm/ppc4xx_pic.h>
static struct ocp_func_emac_data ibm440ep_emac0_def = {
.rgmii_idx = -1, /* No RGMII */
.rgmii_mux = -1, /* No RGMII */
.zmii_idx = 0, /* ZMII device index */
.zmii_mux = 0, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 0, /* MAL rx channel number */
.mal_tx_chan = 0, /* MAL tx channel number */
.wol_irq = 61, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
};
static struct ocp_func_emac_data ibm440ep_emac1_def = {
.rgmii_idx = -1, /* No RGMII */
.rgmii_mux = -1, /* No RGMII */
.zmii_idx = 0, /* ZMII device index */
.zmii_mux = 1, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 1, /* MAL rx channel number */
.mal_tx_chan = 2, /* MAL tx channel number */
.wol_irq = 63, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
};
OCP_SYSFS_EMAC_DATA()
static struct ocp_func_mal_data ibm440ep_mal0_def = {
.num_tx_chans = 4, /* Number of TX channels */
.num_rx_chans = 2, /* Number of RX channels */
.txeob_irq = 10, /* TX End Of Buffer IRQ */
.rxeob_irq = 11, /* RX End Of Buffer IRQ */
.txde_irq = 33, /* TX Descriptor Error IRQ */
.rxde_irq = 34, /* RX Descriptor Error IRQ */
.serr_irq = 32, /* MAL System Error IRQ */
};
OCP_SYSFS_MAL_DATA()
static struct ocp_func_iic_data ibm440ep_iic0_def = {
.fast_mode = 0, /* Use standad mode (100Khz) */
};
static struct ocp_func_iic_data ibm440ep_iic1_def = {
.fast_mode = 0, /* Use standad mode (100Khz) */
};
OCP_SYSFS_IIC_DATA()
struct ocp_def core_ocp[] = {
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_OPB,
.index = 0,
.paddr = 0x0EF600000ULL,
.irq = OCP_IRQ_NA,
.pm = OCP_CPM_NA,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_16550,
.index = 0,
.paddr = PPC440EP_UART0_ADDR,
.irq = UART0_INT,
.pm = IBM_CPM_UART0,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_16550,
.index = 1,
.paddr = PPC440EP_UART1_ADDR,
.irq = UART1_INT,
.pm = IBM_CPM_UART1,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_16550,
.index = 2,
.paddr = PPC440EP_UART2_ADDR,
.irq = UART2_INT,
.pm = IBM_CPM_UART2,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_16550,
.index = 3,
.paddr = PPC440EP_UART3_ADDR,
.irq = UART3_INT,
.pm = IBM_CPM_UART3,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_IIC,
.index = 0,
.paddr = 0x0EF600700ULL,
.irq = 2,
.pm = IBM_CPM_IIC0,
.additions = &ibm440ep_iic0_def,
.show = &ocp_show_iic_data
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_IIC,
.index = 1,
.paddr = 0x0EF600800ULL,
.irq = 7,
.pm = IBM_CPM_IIC1,
.additions = &ibm440ep_iic1_def,
.show = &ocp_show_iic_data
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_GPIO,
.index = 0,
.paddr = 0x0EF600B00ULL,
.irq = OCP_IRQ_NA,
.pm = IBM_CPM_GPIO0,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_GPIO,
.index = 1,
.paddr = 0x0EF600C00ULL,
.irq = OCP_IRQ_NA,
.pm = OCP_CPM_NA,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_MAL,
.paddr = OCP_PADDR_NA,
.irq = OCP_IRQ_NA,
.pm = OCP_CPM_NA,
.additions = &ibm440ep_mal0_def,
.show = &ocp_show_mal_data,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_EMAC,
.index = 0,
.paddr = 0x0EF600E00ULL,
.irq = 60,
.pm = OCP_CPM_NA,
.additions = &ibm440ep_emac0_def,
.show = &ocp_show_emac_data,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_EMAC,
.index = 1,
.paddr = 0x0EF600F00ULL,
.irq = 62,
.pm = OCP_CPM_NA,
.additions = &ibm440ep_emac1_def,
.show = &ocp_show_emac_data,
},
{ .vendor = OCP_VENDOR_IBM,
.function = OCP_FUNC_ZMII,
.paddr = 0x0EF600D00ULL,
.irq = OCP_IRQ_NA,
.pm = OCP_CPM_NA,
},
{ .vendor = OCP_VENDOR_INVALID
}
};
/* Polarity and triggering settings for internal interrupt sources */
struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
{ .polarity = 0xffbffe03,
.triggering = 0xfffffe00,
.ext_irq_mask = 0x000001fc, /* IRQ0 - IRQ6 */
},
{ .polarity = 0xffffc6ef,
.triggering = 0xffffc7ff,
.ext_irq_mask = 0x00003800, /* IRQ7 - IRQ9 */
},
};
static struct resource usb_gadget_resources[] = {
[0] = {
.start = 0x050000100ULL,
.end = 0x05000017FULL,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 55,
.end = 55,
.flags = IORESOURCE_IRQ,
},
};
static u64 dma_mask = 0xffffffffULL;
static struct platform_device usb_gadget_device = {
.name = "musbhsfc",
.id = 0,
.num_resources = ARRAY_SIZE(usb_gadget_resources),
.resource = usb_gadget_resources,
.dev = {
.dma_mask = &dma_mask,
.coherent_dma_mask = 0xffffffffULL,
}
};
static struct platform_device *ibm440ep_devs[] __initdata = {
&usb_gadget_device,
};
static int __init
ibm440ep_platform_add_devices(void)
{
return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
}
arch_initcall(ibm440ep_platform_add_devices);

View File

@ -0,0 +1,76 @@
/*
* arch/ppc/platforms/4xx/ibm440ep.h
*
* PPC440EP definitions
*
* Wade Farnsworth <wfarnsworth@mvista.com>
*
* Copyright 2002 Roland Dreier
* Copyright 2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifdef __KERNEL__
#ifndef __PPC_PLATFORMS_IBM440EP_H
#define __PPC_PLATFORMS_IBM440EP_H
#include <linux/config.h>
#include <asm/ibm44x.h>
/* UART */
#define PPC440EP_UART0_ADDR 0x0EF600300
#define PPC440EP_UART1_ADDR 0x0EF600400
#define PPC440EP_UART2_ADDR 0x0EF600500
#define PPC440EP_UART3_ADDR 0x0EF600600
#define UART0_INT 0
#define UART1_INT 1
#define UART2_INT 3
#define UART3_INT 4
/* Clock and Power Management */
#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
#define IBM_CPM_USB1H 0x08000000 /* USB 1.1 Host */
#define IBM_CPM_FPU 0x04000000 /* floating point unit */
#define IBM_CPM_CPU 0x02000000 /* processor core */
#define IBM_CPM_DMA 0x01000000 /* DMA controller */
#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
#define IBM_CPM_EBC 0x00200000 /* External Bus Controller */
#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
#define IBM_CPM_PLB4 0x00040000 /* PLB4 bus arbiter */
#define IBM_CPM_PLB4x3 0x00020000 /* PLB4 to PLB3 bridge controller */
#define IBM_CPM_PLB3x4 0x00010000 /* PLB3 to PLB4 bridge controller */
#define IBM_CPM_PLB3 0x00008000 /* PLB3 bus arbiter */
#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
#define IBM_CPM_EMAC0 0x00000020 /* ethernet port 0 */
#define IBM_CPM_EMAC1 0x00000010 /* ethernet port 1 */
#define IBM_CPM_UART2 0x00000008 /* serial port 2 */
#define IBM_CPM_UART3 0x00000004 /* serial port 3 */
#define IBM_CPM_USB2D 0x00000002 /* USB 2.0 Device */
#define IBM_CPM_USB2H 0x00000001 /* USB 2.0 Host */
#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
| IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \
| IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \
| IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \
| IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \
| IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1)
#endif /* __PPC_PLATFORMS_IBM440EP_H */
#endif /* __KERNEL__ */

View File

@ -48,6 +48,7 @@
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <asm/ppc4xx_pic.h> #include <asm/ppc4xx_pic.h>
#include <asm/ppcboot.h> #include <asm/ppcboot.h>
#include <asm/tlbflush.h>
#include <syslib/gen550.h> #include <syslib/gen550.h>
#include <syslib/ibm440gx_common.h> #include <syslib/ibm440gx_common.h>
@ -266,6 +267,9 @@ ocotea_early_serial_map(void)
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
/* Configure debug serial access */ /* Configure debug serial access */
gen550_init(0, &port); gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
_tlbie(UART0_IO_BASE);
#endif #endif
port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);

View File

@ -55,15 +55,24 @@
*/ */
#define RS_TABLE_SIZE 2 #define RS_TABLE_SIZE 2
/* OpenBIOS defined UART mappings, used before early_serial_setup */ #if defined(__BOOTER__)
/* OpenBIOS defined UART mappings, used by bootloader shim */
#define UART0_IO_BASE 0xE0000200 #define UART0_IO_BASE 0xE0000200
#define UART1_IO_BASE 0xE0000300 #define UART1_IO_BASE 0xE0000300
#else
/* head_44x.S created UART mapping, used before early_serial_setup.
* We cannot use default OpenBIOS UART mappings because they
* don't work for configurations with more than 512M RAM. --ebs
*/
#define UART0_IO_BASE 0xF0000200
#define UART1_IO_BASE 0xF0000300
#endif
#define BASE_BAUD 11059200/16 #define BASE_BAUD 11059200/16
#define STD_UART_OP(num) \ #define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \ { 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \ iomem_base: (void*)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM}, io_type: SERIAL_IO_MEM},
#define SERIAL_PORT_DFNS \ #define SERIAL_PORT_DFNS \

View File

@ -11,6 +11,7 @@ obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o
obj-$(CONFIG_PPC_OCP) += ocp.o obj-$(CONFIG_PPC_OCP) += ocp.o
obj-$(CONFIG_IBM_OCP) += ibm_ocp.o obj-$(CONFIG_IBM_OCP) += ibm_ocp.o
obj-$(CONFIG_44x) += ibm44x_common.o obj-$(CONFIG_44x) += ibm44x_common.o
obj-$(CONFIG_440EP) += ibm440gx_common.o
obj-$(CONFIG_440GP) += ibm440gp_common.o obj-$(CONFIG_440GP) += ibm440gp_common.o
obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440GX) += ibm440gx_common.o
obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o
@ -44,6 +45,7 @@ obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o
obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o
obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \ obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \
todc_time.o todc_time.o
obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o
obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o

View File

@ -34,6 +34,10 @@ void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
u32 plld = CPR_READ(DCRN_CPR_PLLD); u32 plld = CPR_READ(DCRN_CPR_PLLD);
u32 uart0 = SDR_READ(DCRN_SDR_UART0); u32 uart0 = SDR_READ(DCRN_SDR_UART0);
u32 uart1 = SDR_READ(DCRN_SDR_UART1); u32 uart1 = SDR_READ(DCRN_SDR_UART1);
#ifdef CONFIG_440EP
u32 uart2 = SDR_READ(DCRN_SDR_UART2);
u32 uart3 = SDR_READ(DCRN_SDR_UART3);
#endif
/* Dividers */ /* Dividers */
u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32);
@ -96,6 +100,17 @@ void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
p->uart1 = ser_clk; p->uart1 = ser_clk;
else else
p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256); p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
#ifdef CONFIG_440EP
if (uart2 & 0x00800000)
p->uart2 = ser_clk;
else
p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
if (uart3 & 0x00800000)
p->uart3 = ser_clk;
else
p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
#endif
} }
/* Issue L2C diagnostic command */ /* Issue L2C diagnostic command */

View File

@ -29,6 +29,10 @@ struct ibm44x_clocks {
unsigned int ebc; /* PerClk */ unsigned int ebc; /* PerClk */
unsigned int uart0; unsigned int uart0;
unsigned int uart1; unsigned int uart1;
#ifdef CONFIG_440EP
unsigned int uart2;
unsigned int uart3;
#endif
}; };
/* common 44x platform init */ /* common 44x platform init */

View File

@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)];
extern void m8xx_ide_init(void); extern void m8xx_ide_init(void);
extern unsigned long find_available_memory(void); extern unsigned long find_available_memory(void);
extern void m8xx_cpm_reset(uint cpm_page); extern void m8xx_cpm_reset();
extern void m8xx_wdt_handler_install(bd_t *bp); extern void m8xx_wdt_handler_install(bd_t *bp);
extern void rpxfb_alloc_pages(void); extern void rpxfb_alloc_pages(void);
extern void cpm_interrupt_init(void); extern void cpm_interrupt_init(void);
@ -70,13 +70,9 @@ board_init(void)
void __init void __init
m8xx_setup_arch(void) m8xx_setup_arch(void)
{ {
int cpm_page;
cpm_page = (int) alloc_bootmem_pages(PAGE_SIZE);
/* Reset the Communication Processor Module. /* Reset the Communication Processor Module.
*/ */
m8xx_cpm_reset(cpm_page); m8xx_cpm_reset();
#ifdef CONFIG_FB_RPX #ifdef CONFIG_FB_RPX
rpxfb_alloc_pages(); rpxfb_alloc_pages();

View File

@ -191,8 +191,8 @@ struct platform_device ppc_sys_platform_devices[] = {
.num_resources = 2, .num_resources = 2,
.resource = (struct resource[]) { .resource = (struct resource[]) {
{ {
.start = 0x22000, .start = 0x23000,
.end = 0x22fff, .end = 0x23fff,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{ {
@ -208,8 +208,8 @@ struct platform_device ppc_sys_platform_devices[] = {
.num_resources = 2, .num_resources = 2,
.resource = (struct resource[]) { .resource = (struct resource[]) {
{ {
.start = 0x23000, .start = 0x22000,
.end = 0x23fff, .end = 0x22fff,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{ {

View File

@ -1307,7 +1307,7 @@ local int huft_build(
{ {
*t = (inflate_huft *)Z_NULL; *t = (inflate_huft *)Z_NULL;
*m = 0; *m = 0;
return Z_OK; return Z_DATA_ERROR;
} }
@ -1351,6 +1351,7 @@ local int huft_build(
if ((j = *p++) != 0) if ((j = *p++) != 0)
v[x[j]++] = i; v[x[j]++] = i;
} while (++i < n); } while (++i < n);
n = x[g]; /* set n to length of v */
/* Generate the Huffman codes and for each, make the table entries */ /* Generate the Huffman codes and for each, make the table entries */

View File

@ -0,0 +1,987 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc6
# Mon Aug 8 14:12:19 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
CONFIG_SYSVIPC_COMPAT=y
#
# Platform support
#
# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PSERIES is not set
CONFIG_PPC_BPA=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC=y
CONFIG_PPC64=y
CONFIG_PPC_OF=y
CONFIG_BPA_IIC=y
CONFIG_ALTIVEC=y
CONFIG_KEXEC=y
# CONFIG_U3_DART is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_POWER4_ONLY is not set
# CONFIG_IOMMU_VMERGE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_NUMA is not set
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# General setup
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_IP_TCPDIAG=y
CONFIG_IP_TCPDIAG_IPV6=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
CONFIG_IP_NF_CT_PROTO_SCTP=y
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SKGE=m
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_WATCHDOG_RTAS=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_SENSOR is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_SECURITY is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc3 # Linux kernel version: 2.6.13-rc6
# Wed Jul 13 14:40:34 2005 # Mon Aug 8 14:16:59 2005
# #
CONFIG_64BIT=y CONFIG_64BIT=y
CONFIG_MMU=y CONFIG_MMU=y
@ -267,8 +267,6 @@ CONFIG_NET_CLS_ROUTE=y
# Network testing # Network testing
# #
# CONFIG_NET_PKTGEN is not set # CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set # CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set # CONFIG_IRDA is not set
# CONFIG_BT is not set # CONFIG_BT is not set
@ -468,6 +466,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
@ -539,11 +538,9 @@ CONFIG_IEEE1394_RAWIO=y
# #
# Macintosh device drivers # Macintosh device drivers
# #
CONFIG_ADB=y
CONFIG_ADB_PMU=y CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y CONFIG_PMAC_SMU=y
# CONFIG_PMAC_BACKLIGHT is not set # CONFIG_PMAC_BACKLIGHT is not set
# CONFIG_INPUT_ADBHID is not set
CONFIG_THERM_PM72=y CONFIG_THERM_PM72=y
# #
@ -631,6 +628,8 @@ CONFIG_PPPOE=m
# CONFIG_NET_FC is not set # CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set # CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set # CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# #
# ISDN subsystem # ISDN subsystem
@ -718,7 +717,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# #
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set # CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set # CONFIG_APPLICOM is not set

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc3 # Linux kernel version: 2.6.13-rc6
# Wed Jul 13 14:43:39 2005 # Mon Aug 8 14:17:02 2005
# #
CONFIG_64BIT=y CONFIG_64BIT=y
CONFIG_MMU=y CONFIG_MMU=y
@ -257,10 +257,6 @@ CONFIG_NET_CLS_ROUTE=y
# Network testing # Network testing
# #
# CONFIG_NET_PKTGEN is not set # CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set # CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set # CONFIG_IRDA is not set
# CONFIG_BT is not set # CONFIG_BT is not set
@ -388,6 +384,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
@ -537,6 +534,10 @@ CONFIG_PPPOE=m
# CONFIG_NET_FC is not set # CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set # CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# #
# ISDN subsystem # ISDN subsystem
@ -610,7 +611,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# #
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set # CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set # CONFIG_APPLICOM is not set

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc3 # Linux kernel version: 2.6.13-rc6
# Wed Jul 13 14:46:18 2005 # Mon Aug 8 14:17:04 2005
# #
CONFIG_64BIT=y CONFIG_64BIT=y
CONFIG_MMU=y CONFIG_MMU=y
@ -193,8 +193,6 @@ CONFIG_TCP_CONG_BIC=y
# Network testing # Network testing
# #
# CONFIG_NET_PKTGEN is not set # CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set # CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set # CONFIG_IRDA is not set
# CONFIG_BT is not set # CONFIG_BT is not set
@ -433,6 +431,8 @@ CONFIG_E1000=y
# CONFIG_SLIP is not set # CONFIG_SLIP is not set
# CONFIG_SHAPER is not set # CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set # CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# #
# ISDN subsystem # ISDN subsystem
@ -512,7 +512,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# #
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set # CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set # CONFIG_APPLICOM is not set

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc3 # Linux kernel version: 2.6.13-rc6
# Wed Jul 13 14:47:54 2005 # Mon Aug 8 14:17:07 2005
# #
CONFIG_64BIT=y CONFIG_64BIT=y
CONFIG_MMU=y CONFIG_MMU=y
@ -287,10 +287,6 @@ CONFIG_NET_CLS_ROUTE=y
# Network testing # Network testing
# #
# CONFIG_NET_PKTGEN is not set # CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set # CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set # CONFIG_IRDA is not set
# CONFIG_BT is not set # CONFIG_BT is not set
@ -488,6 +484,7 @@ CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA24XX=m
CONFIG_SCSI_LPFC=m CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
@ -645,6 +642,10 @@ CONFIG_PPPOE=m
# CONFIG_NET_FC is not set # CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set # CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# #
# ISDN subsystem # ISDN subsystem
@ -746,7 +747,6 @@ CONFIG_HVCS=m
# #
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set # CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set # CONFIG_APPLICOM is not set

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc3 # Linux kernel version: 2.6.13-rc6
# Wed Jul 13 14:37:07 2005 # Mon Aug 8 14:16:54 2005
# #
CONFIG_64BIT=y CONFIG_64BIT=y
CONFIG_MMU=y CONFIG_MMU=y
@ -289,10 +289,6 @@ CONFIG_NET_CLS_ROUTE=y
# Network testing # Network testing
# #
# CONFIG_NET_PKTGEN is not set # CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set # CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set # CONFIG_IRDA is not set
# CONFIG_BT is not set # CONFIG_BT is not set
@ -506,6 +502,7 @@ CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA24XX=m
CONFIG_SCSI_LPFC=m CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
@ -579,11 +576,9 @@ CONFIG_IEEE1394_AMDTP=m
# #
# Macintosh device drivers # Macintosh device drivers
# #
CONFIG_ADB=y
CONFIG_ADB_PMU=y CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y CONFIG_PMAC_SMU=y
# CONFIG_PMAC_BACKLIGHT is not set # CONFIG_PMAC_BACKLIGHT is not set
# CONFIG_INPUT_ADBHID is not set
CONFIG_THERM_PM72=y CONFIG_THERM_PM72=y
# #
@ -694,6 +689,10 @@ CONFIG_PPPOE=m
# CONFIG_NET_FC is not set # CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set # CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# #
# ISDN subsystem # ISDN subsystem
@ -797,7 +796,6 @@ CONFIG_HVCS=m
# #
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set # CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set # CONFIG_APPLICOM is not set

View File

@ -2071,7 +2071,7 @@ _GLOBAL(hmt_start_secondary)
blr blr
#endif #endif
#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES) #if defined(CONFIG_KEXEC) || (defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES))
_GLOBAL(smp_release_cpus) _GLOBAL(smp_release_cpus)
/* All secondary cpus are spinning on a common /* All secondary cpus are spinning on a common
* spinloop, release them all now so they can start * spinloop, release them all now so they can start

View File

@ -185,7 +185,7 @@ void kexec_copy_flush(struct kimage *image)
void kexec_smp_down(void *arg) void kexec_smp_down(void *arg)
{ {
if (ppc_md.cpu_irq_down) if (ppc_md.cpu_irq_down)
ppc_md.cpu_irq_down(); ppc_md.cpu_irq_down(1);
local_irq_disable(); local_irq_disable();
kexec_smp_wait(); kexec_smp_wait();
@ -232,7 +232,7 @@ static void kexec_prepare_cpus(void)
/* after we tell the others to go down */ /* after we tell the others to go down */
if (ppc_md.cpu_irq_down) if (ppc_md.cpu_irq_down)
ppc_md.cpu_irq_down(); ppc_md.cpu_irq_down(0);
put_cpu(); put_cpu();
@ -243,15 +243,19 @@ static void kexec_prepare_cpus(void)
static void kexec_prepare_cpus(void) static void kexec_prepare_cpus(void)
{ {
extern void smp_release_cpus(void);
/* /*
* move the secondarys to us so that we can copy * move the secondarys to us so that we can copy
* the new kernel 0-0x100 safely * the new kernel 0-0x100 safely
* *
* do this if kexec in setup.c ? * do this if kexec in setup.c ?
*
* We need to release the cpus if we are ever going from an
* UP to an SMP kernel.
*/ */
smp_relase_cpus(); smp_release_cpus();
if (ppc_md.cpu_irq_down) if (ppc_md.cpu_irq_down)
ppc_md.cpu_irq_down(); ppc_md.cpu_irq_down(0);
local_irq_disable(); local_irq_disable();
} }

View File

@ -1129,6 +1129,9 @@ _GLOBAL(sys_call_table32)
.llong .compat_sys_waitid .llong .compat_sys_waitid
.llong .sys32_ioprio_set .llong .sys32_ioprio_set
.llong .sys32_ioprio_get .llong .sys32_ioprio_get
.llong .sys_inotify_init /* 275 */
.llong .sys_inotify_add_watch
.llong .sys_inotify_rm_watch
.balign 8 .balign 8
_GLOBAL(sys_call_table) _GLOBAL(sys_call_table)
@ -1407,3 +1410,6 @@ _GLOBAL(sys_call_table)
.llong .sys_waitid .llong .sys_waitid
.llong .sys_ioprio_set .llong .sys_ioprio_set
.llong .sys_ioprio_get .llong .sys_ioprio_get
.llong .sys_inotify_init /* 275 */
.llong .sys_inotify_add_watch
.llong .sys_inotify_rm_watch

View File

@ -794,10 +794,10 @@ void mpic_setup_this_cpu(void)
/* /*
* XXX: someone who knows mpic should check this. * XXX: someone who knows mpic should check this.
* do we need to eoi the ipi here (see xics comments)? * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
* or can we reset the mpic in the new kernel? * or can we reset the mpic in the new kernel?
*/ */
void mpic_teardown_this_cpu(void) void mpic_teardown_this_cpu(int secondary)
{ {
struct mpic *mpic = mpic_primary; struct mpic *mpic = mpic_primary;
unsigned long flags; unsigned long flags;

View File

@ -256,7 +256,7 @@ extern unsigned int mpic_irq_get_priority(unsigned int irq);
extern void mpic_setup_this_cpu(void); extern void mpic_setup_this_cpu(void);
/* Clean up for kexec (or cpu offline or ...) */ /* Clean up for kexec (or cpu offline or ...) */
extern void mpic_teardown_this_cpu(void); extern void mpic_teardown_this_cpu(int secondary);
/* Request IPIs on primary mpic */ /* Request IPIs on primary mpic */
extern void mpic_request_ipis(void); extern void mpic_request_ipis(void);

View File

@ -108,8 +108,28 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region
region->end = res->end - offset; region->end = res->end - offset;
} }
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
unsigned long offset = 0;
struct pci_controller *hose = pci_bus_to_host(dev->bus);
if (!hose)
return;
if (res->flags & IORESOURCE_IO)
offset = (unsigned long)hose->io_base_virt - pci_io_base;
if (res->flags & IORESOURCE_MEM)
offset = hose->pci_mem_offset;
res->start = region->start + offset;
res->end = region->end + offset;
}
#ifdef CONFIG_HOTPLUG #ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_resource_to_bus);
EXPORT_SYMBOL(pcibios_bus_to_resource);
#endif #endif
/* /*

View File

@ -916,6 +916,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
} }
} }
#ifdef CONFIG_ALTIVEC
/* Check if we have a VMX and eventually update CPU features */ /* Check if we have a VMX and eventually update CPU features */
prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", NULL); prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", NULL);
if (prop && (*prop) > 0) { if (prop && (*prop) > 0) {
@ -929,6 +930,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
} }
#endif /* CONFIG_ALTIVEC */
/* /*
* Check for an SMT capable CPU and set the CPU feature. We do * Check for an SMT capable CPU and set the CPU feature. We do

View File

@ -647,29 +647,30 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
} }
} }
void xics_teardown_cpu(void) void xics_teardown_cpu(int secondary)
{ {
int cpu = smp_processor_id(); int cpu = smp_processor_id();
int status;
ops->cppr_info(cpu, 0x00); ops->cppr_info(cpu, 0x00);
iosync(); iosync();
/* /*
* we need to EOI the IPI if we got here from kexec down IPI * Some machines need to have at least one cpu in the GIQ,
* * so leave the master cpu in the group.
* xics doesn't care if we duplicate an EOI as long as we
* don't EOI and raise priority.
*
* probably need to check all the other interrupts too
* should we be flagging idle loop instead?
* or creating some task to be scheduled?
*/ */
ops->xirr_info_set(cpu, XICS_IPI); if (secondary) {
/*
status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, * we need to EOI the IPI if we got here from kexec down IPI
(1UL << interrupt_server_size) - 1 - default_distrib_server, 0); *
WARN_ON(status != 0); * probably need to check all the other interrupts too
* should we be flagging idle loop instead?
* or creating some task to be scheduled?
*/
ops->xirr_info_set(cpu, XICS_IPI);
rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
(1UL << interrupt_server_size) - 1 -
default_distrib_server, 0);
}
} }
#ifdef CONFIG_HOTPLUG_CPU #ifdef CONFIG_HOTPLUG_CPU

Some files were not shown because too many files have changed in this diff Show More