mirror of https://gitee.com/openkylin/linux.git
regulator: rt6245: Add support for Richtek RT6245
Richtek RT6245 is a high-performance, synchronous step-down converter that can deliver up to 14A output current with an input supply voltage range of 4.5V to 17V. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1622699844-19203-2-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
ChiYuan Huang
Mark Brown
parent
1623d767c7
commit
a747070e9b
|
|
@ -1031,6 +1031,15 @@ config REGULATOR_RT6160
|
|||
The wide output range is from 2025mV to 5200mV and can be used on most
|
||||
common application scenario.
|
||||
|
||||
config REGULATOR_RT6245
|
||||
tristate "Richtek RT6245 voltage regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This adds supprot for Richtek RT6245 voltage regulator.
|
||||
It can support up to 14A output current and adjustable output voltage
|
||||
from 0.4375V to 1.3875V, per step 12.5mV.
|
||||
|
||||
config REGULATOR_RTMV20
|
||||
tristate "RTMV20 Laser Diode Regulator"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -124,6 +124,7 @@ obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
|
||||
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,254 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
#define RT6245_VIRT_OCLIMIT 0x00
|
||||
#define RT6245_VIRT_OTLEVEL 0x01
|
||||
#define RT6245_VIRT_PGDLYTIME 0x02
|
||||
#define RT6245_VIRT_SLEWRATE 0x03
|
||||
#define RT6245_VIRT_SWFREQ 0x04
|
||||
#define RT6245_VIRT_VOUT 0x05
|
||||
|
||||
#define RT6245_VOUT_MASK GENMASK(6, 0)
|
||||
#define RT6245_SLEW_MASK GENMASK(2, 0)
|
||||
#define RT6245_CHKSUM_MASK BIT(7)
|
||||
#define RT6245_CODE_MASK GENMASK(6, 0)
|
||||
|
||||
/* HW Enable + Soft start time */
|
||||
#define RT6245_ENTIME_IN_US 5000
|
||||
|
||||
#define RT6245_VOUT_MINUV 437500
|
||||
#define RT6245_VOUT_MAXUV 1387500
|
||||
#define RT6245_VOUT_STEPUV 12500
|
||||
#define RT6245_NUM_VOUT ((RT6245_VOUT_MAXUV - RT6245_VOUT_MINUV) / RT6245_VOUT_STEPUV + 1)
|
||||
|
||||
struct rt6245_priv {
|
||||
struct gpio_desc *enable_gpio;
|
||||
bool enable_state;
|
||||
};
|
||||
|
||||
static int rt6245_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct rt6245_priv *priv = rdev_get_drvdata(rdev);
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
int ret;
|
||||
|
||||
if (!priv->enable_gpio)
|
||||
return 0;
|
||||
|
||||
gpiod_direction_output(priv->enable_gpio, 1);
|
||||
usleep_range(RT6245_ENTIME_IN_US, RT6245_ENTIME_IN_US + 1000);
|
||||
|
||||
regcache_cache_only(regmap, false);
|
||||
ret = regcache_sync(regmap);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
priv->enable_state = true;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rt6245_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct rt6245_priv *priv = rdev_get_drvdata(rdev);
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
|
||||
if (!priv->enable_gpio)
|
||||
return -EINVAL;
|
||||
|
||||
regcache_cache_only(regmap, true);
|
||||
regcache_mark_dirty(regmap);
|
||||
|
||||
gpiod_direction_output(priv->enable_gpio, 0);
|
||||
|
||||
priv->enable_state = false;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rt6245_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
struct rt6245_priv *priv = rdev_get_drvdata(rdev);
|
||||
|
||||
return priv->enable_state ? 1 : 0;
|
||||
}
|
||||
|
||||
static const struct regulator_ops rt6245_regulator_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
||||
.enable = rt6245_enable,
|
||||
.disable = rt6245_disable,
|
||||
.is_enabled = rt6245_is_enabled,
|
||||
};
|
||||
|
||||
/* ramp delay dividend is 12500 uV/uS, and divisor from 1 to 8 */
|
||||
static const unsigned int rt6245_ramp_delay_table[] = {
|
||||
12500, 6250, 4167, 3125, 2500, 2083, 1786, 1562
|
||||
};
|
||||
|
||||
static const struct regulator_desc rt6245_regulator_desc = {
|
||||
.name = "rt6245-regulator",
|
||||
.ops = &rt6245_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.min_uV = RT6245_VOUT_MINUV,
|
||||
.uV_step = RT6245_VOUT_STEPUV,
|
||||
.n_voltages = RT6245_NUM_VOUT,
|
||||
.ramp_delay_table = rt6245_ramp_delay_table,
|
||||
.n_ramp_values = ARRAY_SIZE(rt6245_ramp_delay_table),
|
||||
.owner = THIS_MODULE,
|
||||
.vsel_reg = RT6245_VIRT_VOUT,
|
||||
.vsel_mask = RT6245_VOUT_MASK,
|
||||
.ramp_reg = RT6245_VIRT_SLEWRATE,
|
||||
.ramp_mask = RT6245_SLEW_MASK,
|
||||
};
|
||||
|
||||
static int rt6245_init_device_properties(struct device *dev)
|
||||
{
|
||||
const struct {
|
||||
const char *name;
|
||||
unsigned int reg;
|
||||
} rt6245_props[] = {
|
||||
{ "richtek,oc-level-select", RT6245_VIRT_OCLIMIT },
|
||||
{ "richtek,ot-level-select", RT6245_VIRT_OTLEVEL },
|
||||
{ "richtek,pgdly-time-select", RT6245_VIRT_PGDLYTIME },
|
||||
{ "richtek,switch-freq-select", RT6245_VIRT_SWFREQ }
|
||||
};
|
||||
struct regmap *regmap = dev_get_regmap(dev, NULL);
|
||||
u8 propval;
|
||||
int i, ret;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(rt6245_props); i++) {
|
||||
ret = device_property_read_u8(dev, rt6245_props[i].name, &propval);
|
||||
if (ret)
|
||||
continue;
|
||||
|
||||
ret = regmap_write(regmap, rt6245_props[i].reg, propval);
|
||||
if (ret) {
|
||||
dev_err(dev, "Fail to apply [%s:%d]\n", rt6245_props[i].name, propval);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rt6245_reg_write(void *context, unsigned int reg, unsigned int val)
|
||||
{
|
||||
struct i2c_client *i2c = context;
|
||||
const u8 func_base[] = { 0x6F, 0x73, 0x78, 0x61, 0x7C, 0 };
|
||||
unsigned int code, bit_count;
|
||||
|
||||
code = func_base[reg];
|
||||
code += val;
|
||||
|
||||
/* xor checksum for bit 6 to 0 */
|
||||
bit_count = hweight8(code & RT6245_CODE_MASK);
|
||||
if (bit_count % 2)
|
||||
code |= RT6245_CHKSUM_MASK;
|
||||
else
|
||||
code &= ~RT6245_CHKSUM_MASK;
|
||||
|
||||
return i2c_smbus_write_byte(i2c, code);
|
||||
}
|
||||
|
||||
static const struct reg_default rt6245_reg_defaults[] = {
|
||||
/* Default over current 14A */
|
||||
{ RT6245_VIRT_OCLIMIT, 2 },
|
||||
/* Default over temperature 150'c */
|
||||
{ RT6245_VIRT_OTLEVEL, 0 },
|
||||
/* Default power good delay time 10us */
|
||||
{ RT6245_VIRT_PGDLYTIME, 1 },
|
||||
/* Default slewrate 12.5mV/uS */
|
||||
{ RT6245_VIRT_SLEWRATE, 0 },
|
||||
/* Default switch frequency 800KHz */
|
||||
{ RT6245_VIRT_SWFREQ, 1 },
|
||||
/* Default voltage 750mV */
|
||||
{ RT6245_VIRT_VOUT, 0x19 }
|
||||
};
|
||||
|
||||
static const struct regmap_config rt6245_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = RT6245_VIRT_VOUT,
|
||||
.cache_type = REGCACHE_FLAT,
|
||||
.reg_defaults = rt6245_reg_defaults,
|
||||
.num_reg_defaults = ARRAY_SIZE(rt6245_reg_defaults),
|
||||
.reg_write = rt6245_reg_write,
|
||||
};
|
||||
|
||||
static int rt6245_probe(struct i2c_client *i2c)
|
||||
{
|
||||
struct rt6245_priv *priv;
|
||||
struct regmap *regmap;
|
||||
struct regulator_config regulator_cfg = {};
|
||||
struct regulator_dev *rdev;
|
||||
int ret;
|
||||
|
||||
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->enable_state = true;
|
||||
|
||||
priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(priv->enable_gpio)) {
|
||||
dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
|
||||
return PTR_ERR(priv->enable_gpio);
|
||||
}
|
||||
|
||||
usleep_range(RT6245_ENTIME_IN_US, RT6245_ENTIME_IN_US + 1000);
|
||||
|
||||
regmap = devm_regmap_init(&i2c->dev, NULL, i2c, &rt6245_regmap_config);
|
||||
if (IS_ERR(regmap)) {
|
||||
dev_err(&i2c->dev, "Failed to initialize the regmap\n");
|
||||
return PTR_ERR(regmap);
|
||||
}
|
||||
|
||||
ret = rt6245_init_device_properties(&i2c->dev);
|
||||
if (ret) {
|
||||
dev_err(&i2c->dev, "Failed to initialize device properties\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
regulator_cfg.dev = &i2c->dev;
|
||||
regulator_cfg.of_node = i2c->dev.of_node;
|
||||
regulator_cfg.regmap = regmap;
|
||||
regulator_cfg.driver_data = priv;
|
||||
regulator_cfg.init_data = of_get_regulator_init_data(&i2c->dev, i2c->dev.of_node,
|
||||
&rt6245_regulator_desc);
|
||||
rdev = devm_regulator_register(&i2c->dev, &rt6245_regulator_desc, ®ulator_cfg);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(&i2c->dev, "Failed to register regulator\n");
|
||||
return PTR_ERR(rdev);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id __maybe_unused rt6245_of_match_table[] = {
|
||||
{ .compatible = "richtek,rt6245", },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, rt6245_of_match_table);
|
||||
|
||||
static struct i2c_driver rt6245_driver = {
|
||||
.driver = {
|
||||
.name = "rt6245",
|
||||
.of_match_table = rt6245_of_match_table,
|
||||
},
|
||||
.probe_new = rt6245_probe,
|
||||
};
|
||||
module_i2c_driver(rt6245_driver);
|
||||
|
||||
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
||||
MODULE_DESCRIPTION("Richtek RT6245 Regulator Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue