From 0e41f715c04f85a40ae6531d660be2241717be1c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 11:48:56 +0200 Subject: [PATCH 01/68] mac80211: fix various problems in ibss code There are a few problems in the IBSS code: a) it tries to activate interfaces that are down after scanning b) it crashes after scanning on an IBSS iface that isn't active c) since the ssid_len is used as a flag, need to make it visible only after all other settings are set, this helps protect against b) For b), we get a system crash: wlan0: Creating new IBSS network, BSSID ce:f9:88:76:1e:4d BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<...>] ieee80211_sta_find_ibss+0x294/0x37d [mac80211] Call Trace: [<...>] ieee80211_ibss_notify_scan_completed+0x0/0x88 [mac80211] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 6030e003180c..895f4854760c 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -786,8 +786,12 @@ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local) mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { + if (!netif_running(sdata->dev)) + continue; if (sdata->vif.type != NL80211_IFTYPE_ADHOC) continue; + if (!sdata->u.ibss.ssid_len) + continue; sdata->u.ibss.last_scan_completed = jiffies; ieee80211_sta_find_ibss(sdata); } @@ -827,9 +831,6 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, { struct sk_buff *skb; - memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN); - sdata->u.ibss.ssid_len = params->ssid_len; - if (params->bssid) { memcpy(sdata->u.ibss.bssid, params->bssid, ETH_ALEN); sdata->u.ibss.fixed_bssid = true; @@ -859,6 +860,17 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH; sdata->u.ibss.ibss_join_req = jiffies; + memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN); + + /* + * The ssid_len setting below is used to see whether + * we are active, and we need all other settings + * before that may get visible. + */ + mb(); + + sdata->u.ibss.ssid_len = params->ssid_len; + set_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request); queue_work(sdata->local->hw.workqueue, &sdata->u.ibss.work); From d5edaedc16ebd0635435dec068d49e07a76ba7d9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 22 Apr 2009 23:02:51 +0200 Subject: [PATCH 02/68] mac80211: fix PS vs. scan race When somebody changes the PS parameters while scanning is in progress, we enable PS -- during the scan. This is clearly not desirable, and we can just abort enabling PS when scanning since when the scan finishes it will be taken care of. Signed-off-by: Johannes Berg Reviewed-by: Kalle Valo Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3610c11286bc..2029b71eb879 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -487,6 +487,13 @@ static void ieee80211_enable_ps(struct ieee80211_local *local, { struct ieee80211_conf *conf = &local->hw.conf; + /* + * If we are scanning right now then the parameters will + * take effect when scan finishes. + */ + if (local->hw_scanning || local->sw_scanning) + return; + if (conf->dynamic_ps_timeout > 0 && !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) { mod_timer(&local->dynamic_ps_timer, jiffies + From 9ccebe6148bcb0aba2d89743df2ff182ced505ec Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 10:32:36 +0200 Subject: [PATCH 03/68] mac80211: rename max_sleep_interval to max_sleep_period Kalle points out that max_sleep_interval is somewhat confusing because the value is measured in beacon intervals, and not in TU. Rename it to max_sleep_period to be consistent with things like DTIM period that are also measured in beacon intervals. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 ++-- net/mac80211/mlme.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 446dbf75a1c5..81d706d85226 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -559,7 +559,7 @@ enum ieee80211_conf_changed { * @beacon_int: beacon interval (TODO make interface config) * * @listen_interval: listen interval in units of beacon interval - * @max_sleep_interval: the maximum number of beacon intervals to sleep for + * @max_sleep_period: the maximum number of beacon intervals to sleep for * before checking the beacon for a TIM bit (managed mode only); this * value will be only achievable between DTIM frames, the hardware * needs to check for the multicast traffic bit in DTIM beacons. @@ -584,7 +584,7 @@ struct ieee80211_conf { int beacon_int; u32 flags; int power_level, dynamic_ps_timeout; - int max_sleep_interval; + int max_sleep_period; u16 listen_interval; bool radio_enabled; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 2029b71eb879..f8925ca7c8f0 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -562,7 +562,7 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) maxslp = min_t(int, dtimper, latency / beaconint_us); - local->hw.conf.max_sleep_interval = maxslp; + local->hw.conf.max_sleep_period = maxslp; local->ps_sdata = found; } } else { From 2d72289095e9621158acf1d59a830cfe920fa93b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 10:38:26 +0200 Subject: [PATCH 04/68] mac80211: internally clear failed scans properly When the IBSS code wants to scan, but that fails, we can get stuck in a situation where you can never scan again. Fix this by properly notifying ourselves when the scan request has failed. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 895f4854760c..9fe1f937e0b4 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -439,7 +439,8 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata) memcpy(sdata->local->int_scan_req.ssids[0].ssid, ifibss->ssid, IEEE80211_MAX_SSID_LEN); sdata->local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len; - ieee80211_request_scan(sdata, &sdata->local->int_scan_req); + if (ieee80211_request_scan(sdata, &sdata->local->int_scan_req)) + ieee80211_scan_failed(sdata->local); } static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) @@ -560,7 +561,8 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) ifibss->ssid, IEEE80211_MAX_SSID_LEN); local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len; - ieee80211_request_scan(sdata, &local->int_scan_req); + if (ieee80211_request_scan(sdata, &local->int_scan_req)) + ieee80211_scan_failed(local); } else if (ifibss->state != IEEE80211_IBSS_MLME_JOINED) { int interval = IEEE80211_SCAN_INTERVAL; From f3b85252f081581a8f257545ed748062dce7798b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 16:01:47 +0200 Subject: [PATCH 05/68] mac80211: fix scan races and rework scanning There are some places marked /* XXX maybe racy? */ and they really are racy because there's no locking. This patch reworks much of the scan code, and introduces proper locking for the scan request as well as the internal scanning (which is necessary for IBSS/managed modes). Helper functions are added to call the scanning code whenever necessary. The scan deferring is changed to simply queue the scanning work instead of trying to start the scan in place, the scanning work will then take care of the rest. Also, currently when internal scans are requested for an interface that is trying to associate, we reject such scans. This was not intended, the mlme code has provisions to scan twice when it can't find the BSS to associate with right away; this has never worked properly. Fix this by not rejecting internal scan requests for an interface that is associating. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 22 +- net/mac80211/ieee80211_i.h | 6 +- net/mac80211/main.c | 2 + net/mac80211/mlme.c | 30 +-- net/mac80211/scan.c | 403 ++++++++++++++++++++----------------- 5 files changed, 238 insertions(+), 225 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 9fe1f937e0b4..25ff583612ef 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -432,15 +432,7 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata) printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other " "IBSS networks with same SSID (merge)\n", sdata->dev->name); - /* XXX maybe racy? */ - if (sdata->local->scan_req) - return; - - memcpy(sdata->local->int_scan_req.ssids[0].ssid, - ifibss->ssid, IEEE80211_MAX_SSID_LEN); - sdata->local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len; - if (ieee80211_request_scan(sdata, &sdata->local->int_scan_req)) - ieee80211_scan_failed(sdata->local); + ieee80211_request_internal_scan(sdata, ifibss->ssid, ifibss->ssid_len); } static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) @@ -553,16 +545,8 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) printk(KERN_DEBUG "%s: Trigger new scan to find an IBSS to " "join\n", sdata->dev->name); - /* XXX maybe racy? */ - if (local->scan_req) - return; - - memcpy(local->int_scan_req.ssids[0].ssid, - ifibss->ssid, IEEE80211_MAX_SSID_LEN); - local->int_scan_req.ssids[0].ssid_len = - ifibss->ssid_len; - if (ieee80211_request_scan(sdata, &local->int_scan_req)) - ieee80211_scan_failed(local); + ieee80211_request_internal_scan(sdata, ifibss->ssid, + ifibss->ssid_len); } else if (ifibss->state != IEEE80211_IBSS_MLME_JOINED) { int interval = IEEE80211_SCAN_INTERVAL; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 1579bc92c88d..e6fd4bcf1c3c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -659,6 +659,7 @@ struct ieee80211_local { /* Scanning and BSS list */ + struct mutex scan_mtx; bool sw_scanning, hw_scanning; struct cfg80211_ssid scan_ssid; struct cfg80211_scan_request int_scan_req; @@ -947,6 +948,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata); /* scan/BSS handling */ void ieee80211_scan_work(struct work_struct *work); +int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, + const u8 *ssid, u8 ssid_len); int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, struct cfg80211_scan_request *req); int ieee80211_scan_results(struct ieee80211_local *local, @@ -960,9 +963,6 @@ int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata, const char *ie, size_t len); void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local); -void ieee80211_scan_failed(struct ieee80211_local *local); -int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata, - struct cfg80211_scan_request *req); struct ieee80211_bss * ieee80211_bss_info_update(struct ieee80211_local *local, struct ieee80211_rx_status *rx_status, diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 5ca62ea15079..e00d124e4ef7 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -783,6 +783,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, INIT_LIST_HEAD(&local->interfaces); mutex_init(&local->iflist_mtx); + mutex_init(&local->scan_mtx); spin_lock_init(&local->key_lock); @@ -1126,6 +1127,7 @@ void ieee80211_free_hw(struct ieee80211_hw *hw) struct ieee80211_local *local = hw_to_local(hw); mutex_destroy(&local->iflist_mtx); + mutex_destroy(&local->scan_mtx); wiphy_free(local->hw.wiphy); } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f8925ca7c8f0..a2f5e6223059 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2072,19 +2072,15 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata) return 0; } else { if (ifmgd->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) { - ifmgd->assoc_scan_tries++; - /* XXX maybe racy? */ - if (local->scan_req) - return -1; - memcpy(local->int_scan_req.ssids[0].ssid, - ifmgd->ssid, IEEE80211_MAX_SSID_LEN); - if (ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL) - local->int_scan_req.ssids[0].ssid_len = 0; - else - local->int_scan_req.ssids[0].ssid_len = ifmgd->ssid_len; + u8 ssid_len = 0; - if (ieee80211_start_scan(sdata, &local->int_scan_req)) - ieee80211_scan_failed(local); + if (!(ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL)) + ssid_len = ifmgd->ssid_len; + + ifmgd->assoc_scan_tries++; + + ieee80211_request_internal_scan(sdata, ifmgd->ssid, + ssid_len); ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE; set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request); @@ -2122,14 +2118,8 @@ static void ieee80211_sta_work(struct work_struct *work) ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE && ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE && test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request)) { - /* - * The call to ieee80211_start_scan can fail but ieee80211_request_scan - * (which queued ieee80211_sta_work) did not return an error. Thus, call - * ieee80211_scan_failed here if ieee80211_start_scan fails in order to - * notify the scan requester. - */ - if (ieee80211_start_scan(sdata, local->scan_req)) - ieee80211_scan_failed(local); + queue_delayed_work(local->hw.workqueue, &local->scan_work, + round_jiffies_relative(0)); return; } diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f25b07feabf9..086d21645cbc 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -202,18 +202,6 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, return RX_QUEUED; } -void ieee80211_scan_failed(struct ieee80211_local *local) -{ - if (WARN_ON(!local->scan_req)) - return; - - /* notify cfg80211 about the failed scan */ - if (local->scan_req != &local->int_scan_req) - cfg80211_scan_done(local->scan_req, true); - - local->scan_req = NULL; -} - /* * inform AP that we will go to sleep so that it will buffer the frames * while we scan @@ -274,29 +262,46 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata) } } +static void ieee80211_restore_scan_ies(struct ieee80211_local *local) +{ + kfree(local->scan_req->ie); + local->scan_req->ie = local->orig_ies; + local->scan_req->ie_len = local->orig_ies_len; +} + void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) { struct ieee80211_local *local = hw_to_local(hw); struct ieee80211_sub_if_data *sdata; + bool was_hw_scan; - if (WARN_ON(!local->hw_scanning && !local->sw_scanning)) + mutex_lock(&local->scan_mtx); + + if (WARN_ON(!local->hw_scanning && !local->sw_scanning)) { + mutex_unlock(&local->scan_mtx); return; - - if (WARN_ON(!local->scan_req)) - return; - - if (local->hw_scanning) { - kfree(local->scan_req->ie); - local->scan_req->ie = local->orig_ies; - local->scan_req->ie_len = local->orig_ies_len; } + if (WARN_ON(!local->scan_req)) { + mutex_unlock(&local->scan_mtx); + return; + } + + if (local->hw_scanning) + ieee80211_restore_scan_ies(local); + if (local->scan_req != &local->int_scan_req) cfg80211_scan_done(local->scan_req, aborted); local->scan_req = NULL; - if (local->hw_scanning) { - local->hw_scanning = false; + was_hw_scan = local->hw_scanning; + local->hw_scanning = false; + local->sw_scanning = false; + + /* we only have to protect scan_req and hw/sw scan */ + mutex_unlock(&local->scan_mtx); + + if (was_hw_scan) { /* * Somebody might have requested channel change during scan * that we won't have acted upon, try now. ieee80211_hw_config @@ -306,7 +311,6 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) goto done; } - local->sw_scanning = false; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); netif_tx_lock_bh(local->mdev); @@ -354,6 +358,146 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) } EXPORT_SYMBOL(ieee80211_scan_completed); +static int ieee80211_start_sw_scan(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + + /* + * Hardware/driver doesn't support hw_scan, so use software + * scanning instead. First send a nullfunc frame with power save + * bit on so that AP will buffer the frames for us while we are not + * listening, then send probe requests to each channel and wait for + * the responses. After all channels are scanned, tune back to the + * original channel and send a nullfunc frame with power save bit + * off to trigger the AP to send us all the buffered frames. + * + * Note that while local->sw_scanning is true everything else but + * nullfunc frames and probe requests will be dropped in + * ieee80211_tx_h_check_assoc(). + */ + if (local->ops->sw_scan_start) + local->ops->sw_scan_start(local_to_hw(local)); + + mutex_lock(&local->iflist_mtx); + list_for_each_entry(sdata, &local->interfaces, list) { + if (!netif_running(sdata->dev)) + continue; + + /* disable beaconing */ + if (sdata->vif.type == NL80211_IFTYPE_AP || + sdata->vif.type == NL80211_IFTYPE_ADHOC || + sdata->vif.type == NL80211_IFTYPE_MESH_POINT) + ieee80211_if_config(sdata, + IEEE80211_IFCC_BEACON_ENABLED); + + if (sdata->vif.type == NL80211_IFTYPE_STATION) { + if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) { + netif_tx_stop_all_queues(sdata->dev); + ieee80211_scan_ps_enable(sdata); + } + } else + netif_tx_stop_all_queues(sdata->dev); + } + mutex_unlock(&local->iflist_mtx); + + local->scan_state = SCAN_SET_CHANNEL; + local->scan_channel_idx = 0; + + netif_addr_lock_bh(local->mdev); + local->filter_flags |= FIF_BCN_PRBRESP_PROMISC; + local->ops->configure_filter(local_to_hw(local), + FIF_BCN_PRBRESP_PROMISC, + &local->filter_flags, + local->mdev->mc_count, + local->mdev->mc_list); + netif_addr_unlock_bh(local->mdev); + + /* TODO: start scan as soon as all nullfunc frames are ACKed */ + queue_delayed_work(local->hw.workqueue, &local->scan_work, + IEEE80211_CHANNEL_TIME); + + return 0; +} + + +static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, + struct cfg80211_scan_request *req) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + int rc; + + if (local->scan_req) + return -EBUSY; + + if (local->ops->hw_scan) { + u8 *ies; + int ielen; + + ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN + + local->scan_ies_len + req->ie_len, GFP_KERNEL); + if (!ies) + return -ENOMEM; + + ielen = ieee80211_build_preq_ies(local, ies, + req->ie, req->ie_len); + local->orig_ies = req->ie; + local->orig_ies_len = req->ie_len; + req->ie = ies; + req->ie_len = ielen; + } + + local->scan_req = req; + local->scan_sdata = sdata; + + if (req != &local->int_scan_req && + sdata->vif.type == NL80211_IFTYPE_STATION && + (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE || + ifmgd->state == IEEE80211_STA_MLME_AUTHENTICATE || + ifmgd->state == IEEE80211_STA_MLME_ASSOCIATE)) { + /* actually wait for the assoc to finish/time out */ + set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request); + return 0; + } + + if (local->ops->hw_scan) + local->hw_scanning = true; + else + local->sw_scanning = true; + /* + * Kicking off the scan need not be protected, + * only the scan variable stuff, since now + * local->scan_req is assigned and other callers + * will abort their scan attempts. + * + * This avoids getting a scan_mtx -> iflist_mtx + * dependency, so that the scan completed calls + * have more locking freedom. + */ + mutex_unlock(&local->scan_mtx); + + if (local->ops->hw_scan) + rc = local->ops->hw_scan(local_to_hw(local), + local->scan_req); + else + rc = ieee80211_start_sw_scan(local); + + mutex_lock(&local->scan_mtx); + + if (rc) { + if (local->ops->hw_scan) { + local->hw_scanning = false; + ieee80211_restore_scan_ies(local); + } else + local->sw_scanning = false; + + local->scan_req = NULL; + local->scan_sdata = NULL; + } + + return rc; +} + void ieee80211_scan_work(struct work_struct *work) { struct ieee80211_local *local = @@ -363,17 +507,41 @@ void ieee80211_scan_work(struct work_struct *work) int skip, i; unsigned long next_delay = 0; + mutex_lock(&local->scan_mtx); + if (!sdata || !local->scan_req) { + mutex_unlock(&local->scan_mtx); + return; + } + + if (local->scan_req && !(local->sw_scanning || local->hw_scanning)) { + struct cfg80211_scan_request *req = local->scan_req; + int rc; + + local->scan_req = NULL; + + rc = __ieee80211_start_scan(sdata, req); + mutex_unlock(&local->scan_mtx); + + if (rc) + ieee80211_scan_completed(&local->hw, true); + return; + } + + mutex_unlock(&local->scan_mtx); + /* * Avoid re-scheduling when the sdata is going away. */ - if (!netif_running(sdata->dev)) + if (!netif_running(sdata->dev)) { + ieee80211_scan_completed(&local->hw, true); return; + } switch (local->scan_state) { case SCAN_SET_CHANNEL: /* if no more bands/channels left, complete scan */ if (local->scan_channel_idx >= local->scan_req->n_channels) { - ieee80211_scan_completed(local_to_hw(local), false); + ieee80211_scan_completed(&local->hw, false); return; } skip = 0; @@ -422,166 +590,35 @@ void ieee80211_scan_work(struct work_struct *work) next_delay); } - -int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata, - struct cfg80211_scan_request *req) -{ - struct ieee80211_local *local = scan_sdata->local; - struct ieee80211_sub_if_data *sdata; - - if (!req) - return -EINVAL; - - if (local->scan_req && local->scan_req != req) - return -EBUSY; - - local->scan_req = req; - - /* MLME-SCAN.request (page 118) page 144 (11.1.3.1) - * BSSType: INFRASTRUCTURE, INDEPENDENT, ANY_BSS - * BSSID: MACAddress - * SSID - * ScanType: ACTIVE, PASSIVE - * ProbeDelay: delay (in microseconds) to be used prior to transmitting - * a Probe frame during active scanning - * ChannelList - * MinChannelTime (>= ProbeDelay), in TU - * MaxChannelTime: (>= MinChannelTime), in TU - */ - - /* MLME-SCAN.confirm - * BSSDescriptionSet - * ResultCode: SUCCESS, INVALID_PARAMETERS - */ - - if (local->sw_scanning || local->hw_scanning) { - if (local->scan_sdata == scan_sdata) - return 0; - return -EBUSY; - } - - if (local->ops->hw_scan) { - u8 *ies; - int rc, ielen; - - ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN + - local->scan_ies_len + req->ie_len, GFP_KERNEL); - if (!ies) - return -ENOMEM; - - ielen = ieee80211_build_preq_ies(local, ies, - req->ie, req->ie_len); - local->orig_ies = req->ie; - local->orig_ies_len = req->ie_len; - req->ie = ies; - req->ie_len = ielen; - - local->hw_scanning = true; - rc = local->ops->hw_scan(local_to_hw(local), req); - if (rc) { - local->hw_scanning = false; - kfree(ies); - req->ie_len = local->orig_ies_len; - req->ie = local->orig_ies; - return rc; - } - local->scan_sdata = scan_sdata; - return 0; - } - - /* - * Hardware/driver doesn't support hw_scan, so use software - * scanning instead. First send a nullfunc frame with power save - * bit on so that AP will buffer the frames for us while we are not - * listening, then send probe requests to each channel and wait for - * the responses. After all channels are scanned, tune back to the - * original channel and send a nullfunc frame with power save bit - * off to trigger the AP to send us all the buffered frames. - * - * Note that while local->sw_scanning is true everything else but - * nullfunc frames and probe requests will be dropped in - * ieee80211_tx_h_check_assoc(). - */ - local->sw_scanning = true; - if (local->ops->sw_scan_start) - local->ops->sw_scan_start(local_to_hw(local)); - - mutex_lock(&local->iflist_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (!netif_running(sdata->dev)) - continue; - - /* disable beaconing */ - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_ADHOC || - sdata->vif.type == NL80211_IFTYPE_MESH_POINT) - ieee80211_if_config(sdata, - IEEE80211_IFCC_BEACON_ENABLED); - - if (sdata->vif.type == NL80211_IFTYPE_STATION) { - if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) { - netif_tx_stop_all_queues(sdata->dev); - ieee80211_scan_ps_enable(sdata); - } - } else - netif_tx_stop_all_queues(sdata->dev); - } - mutex_unlock(&local->iflist_mtx); - - local->scan_state = SCAN_SET_CHANNEL; - local->scan_channel_idx = 0; - local->scan_sdata = scan_sdata; - local->scan_req = req; - - netif_addr_lock_bh(local->mdev); - local->filter_flags |= FIF_BCN_PRBRESP_PROMISC; - local->ops->configure_filter(local_to_hw(local), - FIF_BCN_PRBRESP_PROMISC, - &local->filter_flags, - local->mdev->mc_count, - local->mdev->mc_list); - netif_addr_unlock_bh(local->mdev); - - /* TODO: start scan as soon as all nullfunc frames are ACKed */ - queue_delayed_work(local->hw.workqueue, &local->scan_work, - IEEE80211_CHANNEL_TIME); - - return 0; -} - - int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, struct cfg80211_scan_request *req) { - struct ieee80211_local *local = sdata->local; - struct ieee80211_if_managed *ifmgd; + int res; - if (!req) - return -EINVAL; + mutex_lock(&sdata->local->scan_mtx); + res = __ieee80211_start_scan(sdata, req); + mutex_unlock(&sdata->local->scan_mtx); - if (local->scan_req && local->scan_req != req) - return -EBUSY; - - local->scan_req = req; - - if (sdata->vif.type != NL80211_IFTYPE_STATION) - return ieee80211_start_scan(sdata, req); - - /* - * STA has a state machine that might need to defer scanning - * while it's trying to associate/authenticate, therefore we - * queue it up to the state machine in that case. - */ - - if (local->sw_scanning || local->hw_scanning) { - if (local->scan_sdata == sdata) - return 0; - return -EBUSY; - } - - ifmgd = &sdata->u.mgd; - set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request); - queue_work(local->hw.workqueue, &ifmgd->work); - - return 0; + return res; +} + +int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, + const u8 *ssid, u8 ssid_len) +{ + struct ieee80211_local *local = sdata->local; + int ret = -EBUSY; + + mutex_lock(&local->scan_mtx); + + /* busy scanning */ + if (local->scan_req) + goto unlock; + + memcpy(local->int_scan_req.ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN); + local->int_scan_req.ssids[0].ssid_len = ssid_len; + + ret = __ieee80211_start_scan(sdata, &sdata->local->int_scan_req); + unlock: + mutex_unlock(&local->scan_mtx); + return ret; } From 57c4d7b4c4986037be51476b8e3025d5ba18d8b8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 16:10:04 +0200 Subject: [PATCH 06/68] mac80211: clean up beacon interval settings We currently have two beacon interval configuration knobs: hw.conf.beacon_int and vif.bss_info.beacon_int. This is rather confusing, even though the former is used when we beacon ourselves and the latter when we are associated to an AP. This just deprecates the hw.conf.beacon_int setting in favour of always using vif.bss_info.beacon_int. Since it touches all the beaconing IBSS code anyway, we can also add support for the cfg80211 IBSS beacon interval configuration easily. NOTE: The hw.conf.beacon_int setting is retained for now due to drivers still using it -- I couldn't untangle all drivers, some are updated in this patch. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/mac.c | 6 ++--- drivers/net/wireless/ath/ar9170/main.c | 5 ++++- drivers/net/wireless/ath/ath5k/base.c | 5 ++++- drivers/net/wireless/ath/ath9k/ath9k.h | 2 ++ drivers/net/wireless/ath/ath9k/beacon.c | 9 +++----- drivers/net/wireless/ath/ath9k/main.c | 22 +++++++++--------- drivers/net/wireless/ath/ath9k/xmit.c | 2 +- drivers/net/wireless/b43/main.c | 12 +++++----- drivers/net/wireless/b43legacy/main.c | 10 ++++----- drivers/net/wireless/iwlwifi/iwl-agn.c | 3 ++- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +-- drivers/net/wireless/iwlwifi/iwl3945-base.c | 5 ++--- drivers/net/wireless/libertas_tf/main.c | 2 +- drivers/net/wireless/mac80211_hwsim.c | 20 ++++++++++------- include/net/mac80211.h | 14 ++++++++++-- net/mac80211/cfg.c | 17 +++++--------- net/mac80211/ibss.c | 25 ++++++++++++++------- net/mac80211/main.c | 17 +++++++++----- net/mac80211/mlme.c | 1 + net/mac80211/sta_info.c | 12 +++++----- net/mac80211/tx.c | 2 +- 21 files changed, 112 insertions(+), 82 deletions(-) diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c index c8fa3073169f..0e5967dd119c 100644 --- a/drivers/net/wireless/ath/ar9170/mac.c +++ b/drivers/net/wireless/ath/ar9170/mac.c @@ -316,9 +316,9 @@ int ar9170_set_beacon_timers(struct ar9170 *ar) u32 v = 0; u32 pretbtt = 0; - v |= ar->hw->conf.beacon_int; - if (ar->vif) { + v |= ar->vif->bss_conf.beacon_int; + switch (ar->vif->type) { case NL80211_IFTYPE_MESH_POINT: case NL80211_IFTYPE_ADHOC: @@ -326,7 +326,7 @@ int ar9170_set_beacon_timers(struct ar9170 *ar) break; case NL80211_IFTYPE_AP: v |= BIT(24); - pretbtt = (ar->hw->conf.beacon_int - 6) << 16; + pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16; break; default: break; diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 1b60906b80c9..49c729bc7147 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -1337,7 +1337,7 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed) goto out; } - if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) { + if (changed & BSS_CHANGED_BEACON_INT) { err = ar9170_set_beacon_timers(ar); if (err) goto out; @@ -1499,6 +1499,9 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, #endif /* CONFIG_AR9170_LEDS */ } + if (changed & BSS_CHANGED_BEACON_INT) + err = ar9170_set_beacon_timers(ar); + if (changed & BSS_CHANGED_HT) { /* TODO */ err = 0; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index c8c658bfcf9d..e4b1d9efa42e 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2756,7 +2756,6 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&sc->lock); - sc->bintval = conf->beacon_int; sc->power_level = conf->power_level; ret = ath5k_chan_set(sc, conf->channel); @@ -3083,6 +3082,10 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, u32 changes) { struct ath5k_softc *sc = hw->priv; + + if (changes & BSS_CHANGED_BEACON_INT) + sc->bintval = bss_conf->beacon_int; + if (changes & BSS_CHANGED_ASSOC) { mutex_lock(&sc->lock); sc->assoc = bss_conf->assoc; diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index c92d46fa9d51..d5084ddf44ff 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -590,6 +590,8 @@ struct ath_softc { int led_on_cnt; int led_off_cnt; + int beacon_interval; + struct ath_rfkill rf_kill; struct ath_ani ani; struct ath9k_node_stats nodestats; diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index eb4759fc6a0d..c17b8382e328 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -320,8 +320,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif) u64 tsfadjust; int intval; - intval = sc->hw->conf.beacon_int ? - sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; + intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL; /* * Calculate the TSF offset for this beacon slot, i.e., the @@ -431,8 +430,7 @@ void ath_beacon_tasklet(unsigned long data) * on the tsf to safeguard against missing an swba. */ - intval = sc->hw->conf.beacon_int ? - sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; + intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL; tsf = ath9k_hw_gettsf64(ah); tsftu = TSF_TO_TU(tsf>>32, tsf); @@ -711,8 +709,7 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif) /* Setup the beacon configuration parameters */ memset(&conf, 0, sizeof(struct ath_beacon_config)); - conf.beacon_interval = sc->hw->conf.beacon_int ? - sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; + conf.beacon_interval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL; conf.listen_interval = 1; conf.dtim_period = conf.beacon_interval; conf.dtim_count = 1; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2398d4f45f28..28cc9cd52f32 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2358,16 +2358,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) if (changed & IEEE80211_CONF_CHANGE_POWER) sc->config.txpowlimit = 2 * conf->power_level; - /* - * The HW TSF has to be reset when the beacon interval changes. - * We set the flag here, and ath_beacon_config_ap() would take this - * into account when it gets called through the subsequent - * config_interface() call - with IFCC_BEACON in the changed field. - */ - - if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) - sc->sc_flags |= SC_OP_TSF_RESET; - mutex_unlock(&sc->mutex); return 0; @@ -2635,6 +2625,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, ath9k_bss_assoc_info(sc, vif, bss_conf); } + /* + * The HW TSF has to be reset when the beacon interval changes. + * We set the flag here, and ath_beacon_config_ap() would take this + * into account when it gets called through the subsequent + * config_interface() call - with IFCC_BEACON in the changed field. + */ + + if (changed & BSS_CHANGED_BEACON_INT) { + sc->sc_flags |= SC_OP_TSF_RESET; + sc->beacon_interval = bss_conf->beacon_int; + } + mutex_unlock(&sc->mutex); } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index faf2cab49ea3..501493ffc3a7 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -971,7 +971,7 @@ int ath_cabq_update(struct ath_softc *sc) else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND) sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND; - qi.tqi_readyTime = (sc->hw->conf.beacon_int * + qi.tqi_readyTime = (sc->beacon_interval * sc->config.cabqReadytime) / 100; ath_txq_update(sc, qnum, &qi); diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index a97c6ff0f12e..3c693e6ec904 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3468,11 +3468,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) if (phy->ops->set_rx_antenna) phy->ops->set_rx_antenna(dev, antenna); - /* Update templates for AP/mesh mode. */ - if (b43_is_mode(wl, NL80211_IFTYPE_AP) || - b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) - b43_set_beacon_int(dev, conf->beacon_int); - if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); @@ -3556,6 +3551,13 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw, goto out_unlock_mutex; b43_mac_suspend(dev); + /* Update templates for AP/mesh mode. */ + if (changed & BSS_CHANGED_BEACON_INT && + (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) || + b43_is_mode(wl, NL80211_IFTYPE_ADHOC))) + b43_set_beacon_int(dev, conf->beacon_int); + if (changed & BSS_CHANGED_BASIC_RATES) b43_update_basic_rates(dev, conf->basic_rates); diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index ee202b4f77b5..276f314688f7 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2721,11 +2721,6 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw, /* Antennas for RX and management frame TX. */ b43legacy_mgmtframe_txantenna(dev, antenna_tx); - /* Update templates for AP mode. */ - if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) - b43legacy_set_beacon_int(dev, conf->beacon_int); - - if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { b43legacy_radio_turn_on(dev); @@ -2827,6 +2822,11 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw, b43legacy_mac_suspend(dev); + if (changed & BSS_CHANGED_BEACON_INT && + (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) || + b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC))) + b43legacy_set_beacon_int(dev, conf->beacon_int); + if (changed & BSS_CHANGED_BASIC_RATES) b43legacy_update_basic_rates(dev, conf->basic_rates); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 277dfc57fde9..4920dcf7d7b0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -567,7 +567,8 @@ static void iwl_setup_rxon_timing(struct iwl_priv *priv) beacon_int = iwl_adjust_beacon_interval(priv->beacon_int); priv->rxon_timing.atim_window = 0; } else { - beacon_int = iwl_adjust_beacon_interval(conf->beacon_int); + beacon_int = iwl_adjust_beacon_interval( + priv->vif->bss_conf.beacon_int); /* TODO: we need to get atim_window from upper stack * for now we set to 0 */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 3dec2d25fa3d..cd8a5ed97c4f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1313,7 +1313,6 @@ int iwl_setup_mac(struct iwl_priv *priv) /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; - hw->conf.beacon_int = 100; hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) @@ -2751,7 +2750,7 @@ void iwl_mac_reset_tsf(struct ieee80211_hw *hw) priv->ibss_beacon = NULL; - priv->beacon_int = priv->hw->conf.beacon_int; + priv->beacon_int = priv->vif->bss_conf.beacon_int; priv->timestamp = 0; if ((priv->iw_mode == NL80211_IFTYPE_STATION)) priv->beacon_int = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index a782292ed435..f9d9b65ef300 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -551,7 +551,8 @@ static void iwl3945_setup_rxon_timing(struct iwl_priv *priv) priv->rxon_timing.atim_window = 0; } else { priv->rxon_timing.beacon_interval = - iwl3945_adjust_beacon_interval(conf->beacon_int); + iwl3945_adjust_beacon_interval( + priv->vif->bss_conf.beacon_int); /* TODO: we need to get atim_window from upper stack * for now we set to 0 */ priv->rxon_timing.atim_window = 0; @@ -4211,8 +4212,6 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; - hw->conf.beacon_int = 100; - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->bands[IEEE80211_BAND_2GHZ]; diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index e7289e2e7f16..68e47fb47a1e 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -380,7 +380,7 @@ static int lbtf_op_config_interface(struct ieee80211_hw *hw, if (beacon) { lbtf_beacon_set(priv, beacon); kfree_skb(beacon); - lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int); + lbtf_beacon_ctrl(priv, 1, vif->bss_conf.beacon_int); } break; default: diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index d4fdc8b7d7d8..24c95a619e4c 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -553,18 +553,13 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) struct mac80211_hwsim_data *data = hw->priv; struct ieee80211_conf *conf = &hw->conf; - printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n", + printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d)\n", wiphy_name(hw->wiphy), __func__, - conf->channel->center_freq, conf->radio_enabled, - conf->beacon_int); + conf->channel->center_freq, conf->radio_enabled); data->channel = conf->channel; data->radio_enabled = conf->radio_enabled; - data->beacon_int = 1024 * conf->beacon_int / 1000 * HZ / 1000; - if (data->beacon_int < 1) - data->beacon_int = 1; - - if (!data->started || !data->radio_enabled) + if (!data->started || !data->radio_enabled || !data->beacon_int) del_timer(&data->beacon_timer); else mod_timer(&data->beacon_timer, jiffies + data->beacon_int); @@ -615,6 +610,7 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, u32 changed) { struct hwsim_vif_priv *vp = (void *)vif->drv_priv; + struct mac80211_hwsim_data *data = hw->priv; hwsim_check_magic(vif); @@ -628,6 +624,14 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, vp->aid = info->aid; } + if (changed & BSS_CHANGED_BEACON_INT) { + printk(KERN_DEBUG " %s: BCNINT: %d\n", + wiphy_name(hw->wiphy), info->beacon_int); + data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000; + if (WARN_ON(data->beacon_int)) + data->beacon_int = 1; + } + if (changed & BSS_CHANGED_ERP_CTS_PROT) { printk(KERN_DEBUG " %s: ERP_CTS_PROT: %d\n", wiphy_name(hw->wiphy), info->use_cts_prot); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 81d706d85226..22c65e8cbb71 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -149,6 +149,7 @@ struct ieee80211_low_level_stats { * @BSS_CHANGED_ERP_SLOT: slot timing changed * @BSS_CHANGED_HT: 802.11n parameters changed * @BSS_CHANGED_BASIC_RATES: Basic rateset changed + * @BSS_CHANGED_BEACON_INT: Beacon interval changed */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -157,6 +158,7 @@ enum ieee80211_bss_change { BSS_CHANGED_ERP_SLOT = 1<<3, BSS_CHANGED_HT = 1<<4, BSS_CHANGED_BASIC_RATES = 1<<5, + BSS_CHANGED_BEACON_INT = 1<<6, }; /** @@ -529,7 +531,7 @@ enum ieee80211_conf_flags { * enum ieee80211_conf_changed - denotes which configuration changed * * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed - * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed + * @_IEEE80211_CONF_CHANGE_BEACON_INTERVAL: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed @@ -539,7 +541,7 @@ enum ieee80211_conf_flags { */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), - IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), + _IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), @@ -548,6 +550,14 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), }; +static inline __deprecated enum ieee80211_conf_changed +__IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void) +{ + return _IEEE80211_CONF_CHANGE_BEACON_INTERVAL; +} +#define IEEE80211_CONF_CHANGE_BEACON_INTERVAL \ + __IEEE80211_CONF_CHANGE_BEACON_INTERVAL() + /** * struct ieee80211_conf - configuration of the device * diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 5e1c230744b5..a898ccd3f2c9 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -451,18 +451,11 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, * This is a kludge. beacon interval should really be part * of the beacon information. */ - if (params->interval && (sdata->local->hw.conf.beacon_int != - params->interval)) { - sdata->local->hw.conf.beacon_int = params->interval; - err = ieee80211_hw_config(sdata->local, - IEEE80211_CONF_CHANGE_BEACON_INTERVAL); - if (err < 0) - return err; - /* - * We updated some parameter so if below bails out - * it's not an error. - */ - err = 0; + if (params->interval && + (sdata->vif.bss_conf.beacon_int != params->interval)) { + sdata->vif.bss_conf.beacon_int = params->interval; + ieee80211_bss_info_change_notify(sdata, + BSS_CHANGED_BEACON_INT); } /* Need to have a beacon head if we don't have one yet */ diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 25ff583612ef..f4879dad3cd7 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -73,6 +73,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; u8 *pos; struct ieee80211_supported_band *sband; + u32 bss_change; if (local->ops->reset_tsf) { /* Reset own TSF to allow time synchronization work. */ @@ -92,8 +93,6 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, memcpy(ifibss->bssid, bssid, ETH_ALEN); - local->hw.conf.beacon_int = beacon_int >= 10 ? beacon_int : 10; - sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID); @@ -101,6 +100,12 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, local->oper_channel = chan; local->oper_channel_type = NL80211_CHAN_NO_HT; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + + sdata->vif.bss_conf.beacon_int = beacon_int; + bss_change = BSS_CHANGED_BEACON_INT; + bss_change |= ieee80211_reset_erp_info(sdata); + ieee80211_bss_info_change_notify(sdata, bss_change); + sband = local->hw.wiphy->bands[chan->band]; /* Build IBSS probe response */ @@ -111,7 +116,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, memset(mgmt->da, 0xff, ETH_ALEN); memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN); - mgmt->u.beacon.beacon_int = cpu_to_le16(local->hw.conf.beacon_int); + mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int); mgmt->u.beacon.timestamp = cpu_to_le64(tsf); mgmt->u.beacon.capab_info = cpu_to_le16(capability); @@ -181,8 +186,13 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_bss *bss) { + u16 beacon_int = bss->cbss.beacon_interval; + + if (beacon_int < 10) + beacon_int = 10; + __ieee80211_sta_join_ibss(sdata, bss->cbss.bssid, - bss->cbss.beacon_interval, + beacon_int, bss->cbss.channel, bss->supp_rates_len, bss->supp_rates, bss->cbss.capability, @@ -464,9 +474,6 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) sband = local->hw.wiphy->bands[ifibss->channel->band]; - if (local->hw.conf.beacon_int == 0) - local->hw.conf.beacon_int = 100; - capability = WLAN_CAPABILITY_IBSS; if (sdata->default_key) @@ -480,7 +487,7 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) *pos++ = (u8) (rate / 5); } - __ieee80211_sta_join_ibss(sdata, bssid, local->hw.conf.beacon_int, + __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int, ifibss->channel, sband->n_bitrates, supp_rates, capability, 0); } @@ -823,6 +830,8 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, } else sdata->u.ibss.fixed_bssid = false; + sdata->vif.bss_conf.beacon_int = params->beacon_interval; + sdata->u.ibss.channel = params->channel; sdata->u.ibss.fixed_channel = params->channel_fixed; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e00d124e4ef7..b254879d8631 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -294,9 +294,6 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; - if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) - return; - if (!changed) return; @@ -305,6 +302,17 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, &sdata->vif, &sdata->vif.bss_conf, changed); + + /* + * DEPRECATED + * + * ~changed is just there to not do this at resume time + */ + if (changed & BSS_CHANGED_BEACON_INT && ~changed) { + local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int; + ieee80211_hw_config(local, + _IEEE80211_CONF_CHANGE_BEACON_INTERVAL); + } } u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) @@ -971,9 +979,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) debugfs_hw_add(local); - if (local->hw.conf.beacon_int < 10) - local->hw.conf.beacon_int = 100; - if (local->hw.max_listen_interval == 0) local->hw.max_listen_interval = 1; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a2f5e6223059..bfd571e6f221 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -842,6 +842,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.timestamp = bss->cbss.tsf; sdata->vif.bss_conf.dtim_period = bss->dtim_period; + bss_info_changed |= BSS_CHANGED_BEACON_INT; bss_info_changed |= ieee80211_handle_bss_capability(sdata, bss->cbss.capability, bss->has_erp_value, bss->erp_value); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 654a8e963ccb..7116220d06be 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -543,9 +543,8 @@ void sta_info_unlink(struct sta_info **sta) spin_unlock_irqrestore(&local->sta_lock, flags); } -static inline int sta_info_buffer_expired(struct ieee80211_local *local, - struct sta_info *sta, - struct sk_buff *skb) +static int sta_info_buffer_expired(struct sta_info *sta, + struct sk_buff *skb) { struct ieee80211_tx_info *info; int timeout; @@ -556,8 +555,9 @@ static inline int sta_info_buffer_expired(struct ieee80211_local *local, info = IEEE80211_SKB_CB(skb); /* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */ - timeout = (sta->listen_interval * local->hw.conf.beacon_int * 32 / - 15625) * HZ; + timeout = (sta->listen_interval * + sta->sdata->vif.bss_conf.beacon_int * + 32 / 15625) * HZ; if (timeout < STA_TX_BUFFER_EXPIRE) timeout = STA_TX_BUFFER_EXPIRE; return time_after(jiffies, info->control.jiffies + timeout); @@ -577,7 +577,7 @@ static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local, for (;;) { spin_lock_irqsave(&sta->ps_tx_buf.lock, flags); skb = skb_peek(&sta->ps_tx_buf); - if (sta_info_buffer_expired(local, sta, skb)) + if (sta_info_buffer_expired(sta, skb)) skb = __skb_dequeue(&sta->ps_tx_buf); else skb = NULL; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1865622003c9..29df65045fc9 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2132,7 +2132,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); /* BSSID is left zeroed, wildcard value */ mgmt->u.beacon.beacon_int = - cpu_to_le16(local->hw.conf.beacon_int); + cpu_to_le16(sdata->vif.bss_conf.beacon_int); mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */ pos = skb_put(skb, 2); From 2d0ddec5b2b859f06116f631fc0ffe94fbceb556 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 16:13:26 +0200 Subject: [PATCH 07/68] mac80211: unify config_interface and bss_info_changed The config_interface method is a little strange, it contains the BSSID and beacon updates, while bss_info_changed contains most other BSS information for each interface. This patch removes config_interface and rolls all the information it previously passed to drivers into bss_info_changed. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/adm8211.c | 14 +- drivers/net/wireless/at76c50x-usb.c | 15 +- drivers/net/wireless/ath/ar9170/main.c | 39 ++--- drivers/net/wireless/ath/ath5k/base.c | 71 +++----- drivers/net/wireless/ath/ath9k/main.c | 182 +++++++++----------- drivers/net/wireless/b43/main.c | 64 +++---- drivers/net/wireless/b43legacy/main.c | 63 +++---- drivers/net/wireless/iwlwifi/iwl-agn.c | 1 - drivers/net/wireless/iwlwifi/iwl-core.c | 162 +++++++---------- drivers/net/wireless/iwlwifi/iwl-core.h | 3 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - drivers/net/wireless/libertas_tf/main.c | 56 +++--- drivers/net/wireless/mac80211_hwsim.c | 25 +-- drivers/net/wireless/mwl8k.c | 18 +- drivers/net/wireless/p54/p54common.c | 63 +++---- drivers/net/wireless/rt2x00/rt2400pci.c | 1 - drivers/net/wireless/rt2x00/rt2500pci.c | 1 - drivers/net/wireless/rt2x00/rt2500usb.c | 1 - drivers/net/wireless/rt2x00/rt2x00.h | 3 - drivers/net/wireless/rt2x00/rt2x00mac.c | 88 ++++------ drivers/net/wireless/rt2x00/rt61pci.c | 1 - drivers/net/wireless/rt2x00/rt73usb.c | 1 - drivers/net/wireless/rtl818x/rtl8180_dev.c | 33 ++-- drivers/net/wireless/rtl818x/rtl8187_dev.c | 48 +++--- drivers/net/wireless/zd1211rw/zd_mac.c | 80 ++++----- include/net/mac80211.h | 51 ++---- net/mac80211/cfg.c | 8 +- net/mac80211/ibss.c | 18 +- net/mac80211/ieee80211_i.h | 1 - net/mac80211/main.c | 131 ++++++-------- net/mac80211/mesh.c | 6 +- net/mac80211/mlme.c | 8 +- net/mac80211/scan.c | 8 +- net/mac80211/util.c | 17 +- 34 files changed, 504 insertions(+), 778 deletions(-) diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index f71821795018..2b9e379994a1 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1311,18 +1311,20 @@ static int adm8211_config(struct ieee80211_hw *dev, u32 changed) return 0; } -static int adm8211_config_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) +static void adm8211_bss_info_changed(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *conf, + u32 changes) { struct adm8211_priv *priv = dev->priv; + if (!(changes & BSS_CHANGED_BSSID)) + return; + if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) { adm8211_set_bssid(dev, conf->bssid); memcpy(priv->bssid, conf->bssid, ETH_ALEN); } - - return 0; } static void adm8211_configure_filter(struct ieee80211_hw *dev, @@ -1753,7 +1755,7 @@ static const struct ieee80211_ops adm8211_ops = { .add_interface = adm8211_add_interface, .remove_interface = adm8211_remove_interface, .config = adm8211_config, - .config_interface = adm8211_config_interface, + .bss_info_changed = adm8211_bss_info_changed, .configure_filter = adm8211_configure_filter, .get_stats = adm8211_get_stats, .get_tx_stats = adm8211_get_tx_stats, diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 55f947ac56d1..cea7f1466c54 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1965,13 +1965,18 @@ static int at76_config(struct ieee80211_hw *hw, u32 changed) return 0; } -static int at76_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) +static void at76_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *conf, + u32 changed) { struct at76_priv *priv = hw->priv; at76_dbg(DBG_MAC80211, "%s():", __func__); + + if (!(changed & BSS_CHANGED_BSSID)) + return; + at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:"); mutex_lock(&priv->mtx); @@ -1983,8 +1988,6 @@ static int at76_config_interface(struct ieee80211_hw *hw, at76_join(priv); mutex_unlock(&priv->mtx); - - return 0; } /* must be atomic */ @@ -2076,7 +2079,7 @@ static const struct ieee80211_ops at76_ops = { .add_interface = at76_add_interface, .remove_interface = at76_remove_interface, .config = at76_config, - .config_interface = at76_config_interface, + .bss_info_changed = at76_bss_info_changed, .configure_filter = at76_configure_filter, .start = at76_mac80211_start, .stop = at76_mac80211_stop, diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 49c729bc7147..3bd3a61225ce 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -1360,33 +1360,6 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed) return err; } -static int ar9170_op_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct ar9170 *ar = hw->priv; - int err = 0; - - mutex_lock(&ar->mutex); - - if (conf->changed & IEEE80211_IFCC_BSSID) { - memcpy(ar->bssid, conf->bssid, ETH_ALEN); - err = ar9170_set_operating_mode(ar); - } - - if (conf->changed & IEEE80211_IFCC_BEACON) { - err = ar9170_update_beacon(ar); - - if (err) - goto out; - err = ar9170_set_beacon_timers(ar); - } - -out: - mutex_unlock(&ar->mutex); - return err; -} - static void ar9170_set_filters(struct work_struct *work) { struct ar9170 *ar = container_of(work, struct ar9170, @@ -1488,6 +1461,17 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, mutex_lock(&ar->mutex); + if (changed & BSS_CHANGED_BSSID) { + memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN); + err = ar9170_set_operating_mode(ar); + } + + if (changed & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) { + err = ar9170_update_beacon(ar); + if (!err) + ar9170_set_beacon_timers(ar); + } + ar9170_regwrite_begin(ar); if (changed & BSS_CHANGED_ASSOC) { @@ -1796,7 +1780,6 @@ static const struct ieee80211_ops ar9170_ops = { .add_interface = ar9170_op_add_interface, .remove_interface = ar9170_op_remove_interface, .config = ar9170_op_config, - .config_interface = ar9170_op_config_interface, .configure_filter = ar9170_op_configure_filter, .conf_tx = ar9170_conf_tx, .bss_info_changed = ar9170_op_bss_info_changed, diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index e4b1d9efa42e..410fc4cfc4c6 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -227,9 +227,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, static void ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); static int ath5k_config(struct ieee80211_hw *hw, u32 changed); -static int ath5k_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf); static void ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *new_flags, @@ -259,7 +256,6 @@ static const struct ieee80211_ops ath5k_hw_ops = { .add_interface = ath5k_add_interface, .remove_interface = ath5k_remove_interface, .config = ath5k_config, - .config_interface = ath5k_config_interface, .configure_filter = ath5k_configure_filter, .set_key = ath5k_set_key, .get_stats = ath5k_get_stats, @@ -2764,44 +2760,6 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) return ret; } -static int -ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - int ret = 0; - - mutex_lock(&sc->lock); - if (sc->vif != vif) { - ret = -EIO; - goto unlock; - } - if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) { - /* Cache for later use during resets */ - memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN); - /* XXX: assoc id is set to 0 for now, mac80211 doesn't have - * a clean way of letting us retrieve this yet. */ - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - mmiowb(); - } - if (conf->changed & IEEE80211_IFCC_BEACON && - (vif->type == NL80211_IFTYPE_ADHOC || - vif->type == NL80211_IFTYPE_MESH_POINT || - vif->type == NL80211_IFTYPE_AP)) { - struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); - if (!beacon) { - ret = -ENOMEM; - goto unlock; - } - ath5k_beacon_update(sc, beacon); - } - -unlock: - mutex_unlock(&sc->lock); - return ret; -} - #define SUPPORTED_FIF_FLAGS \ FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \ FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ @@ -3082,15 +3040,40 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw, u32 changes) { struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + + mutex_lock(&sc->lock); + if (WARN_ON(sc->vif != vif)) + goto unlock; + + if (changes & BSS_CHANGED_BSSID) { + /* Cache for later use during resets */ + memcpy(ah->ah_bssid, bss_conf->bssid, ETH_ALEN); + /* XXX: assoc id is set to 0 for now, mac80211 doesn't have + * a clean way of letting us retrieve this yet. */ + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + mmiowb(); + } if (changes & BSS_CHANGED_BEACON_INT) sc->bintval = bss_conf->beacon_int; if (changes & BSS_CHANGED_ASSOC) { - mutex_lock(&sc->lock); sc->assoc = bss_conf->assoc; if (sc->opmode == NL80211_IFTYPE_STATION) set_beacon_filter(hw, sc->assoc); - mutex_unlock(&sc->lock); } + + if (changes & BSS_CHANGED_BEACON && + (vif->type == NL80211_IFTYPE_ADHOC || + vif->type == NL80211_IFTYPE_MESH_POINT || + vif->type == NL80211_IFTYPE_AP)) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + + if (beacon) + ath5k_beacon_update(sc, beacon); + } + + unlock: + mutex_unlock(&sc->lock); } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 28cc9cd52f32..d3dc8e2c77b2 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2363,104 +2363,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) return 0; } -static int ath9k_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct ath_wiphy *aphy = hw->priv; - struct ath_softc *sc = aphy->sc; - struct ath_hw *ah = sc->sc_ah; - struct ath_vif *avp = (void *)vif->drv_priv; - u32 rfilt = 0; - int error, i; - - mutex_lock(&sc->mutex); - - /* TODO: Need to decide which hw opmode to use for multi-interface - * cases */ - if (vif->type == NL80211_IFTYPE_AP && - ah->opmode != NL80211_IFTYPE_AP) { - ah->opmode = NL80211_IFTYPE_STATION; - ath9k_hw_setopmode(ah); - memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN); - sc->curaid = 0; - ath9k_hw_write_associd(sc); - /* Request full reset to get hw opmode changed properly */ - sc->sc_flags |= SC_OP_FULL_RESET; - } - - if ((conf->changed & IEEE80211_IFCC_BSSID) && - !is_zero_ether_addr(conf->bssid)) { - switch (vif->type) { - case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_MESH_POINT: - /* Set BSSID */ - memcpy(sc->curbssid, conf->bssid, ETH_ALEN); - memcpy(avp->bssid, conf->bssid, ETH_ALEN); - sc->curaid = 0; - ath9k_hw_write_associd(sc); - - /* Set aggregation protection mode parameters */ - sc->config.ath_aggr_prot = 0; - - DPRINTF(sc, ATH_DBG_CONFIG, - "RX filter 0x%x bssid %pM aid 0x%x\n", - rfilt, sc->curbssid, sc->curaid); - - /* need to reconfigure the beacon */ - sc->sc_flags &= ~SC_OP_BEACONS ; - - break; - default: - break; - } - } - - if ((vif->type == NL80211_IFTYPE_ADHOC) || - (vif->type == NL80211_IFTYPE_AP) || - (vif->type == NL80211_IFTYPE_MESH_POINT)) { - if ((conf->changed & IEEE80211_IFCC_BEACON) || - (conf->changed & IEEE80211_IFCC_BEACON_ENABLED && - conf->enable_beacon)) { - /* - * Allocate and setup the beacon frame. - * - * Stop any previous beacon DMA. This may be - * necessary, for example, when an ibss merge - * causes reconfiguration; we may be called - * with beacon transmission active. - */ - ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); - - error = ath_beacon_alloc(aphy, vif); - if (error != 0) { - mutex_unlock(&sc->mutex); - return error; - } - - ath_beacon_config(sc, vif); - } - } - - /* Check for WLAN_CAPABILITY_PRIVACY ? */ - if ((avp->av_opmode != NL80211_IFTYPE_STATION)) { - for (i = 0; i < IEEE80211_WEP_NKID; i++) - if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) - ath9k_hw_keysetmac(sc->sc_ah, - (u16)i, - sc->curbssid); - } - - /* Only legacy IBSS for now */ - if (vif->type == NL80211_IFTYPE_ADHOC) - ath_update_chainmask(sc, 0); - - mutex_unlock(&sc->mutex); - - return 0; -} - #define SUPPORTED_FILTERS \ (FIF_PROMISC_IN_BSS | \ FIF_ALLMULTI | \ @@ -2597,9 +2499,92 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, { struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; + struct ath_hw *ah = sc->sc_ah; + struct ath_vif *avp = (void *)vif->drv_priv; + u32 rfilt = 0; + int error, i; mutex_lock(&sc->mutex); + /* + * TODO: Need to decide which hw opmode to use for + * multi-interface cases + * XXX: This belongs into add_interface! + */ + if (vif->type == NL80211_IFTYPE_AP && + ah->opmode != NL80211_IFTYPE_AP) { + ah->opmode = NL80211_IFTYPE_STATION; + ath9k_hw_setopmode(ah); + memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN); + sc->curaid = 0; + ath9k_hw_write_associd(sc); + /* Request full reset to get hw opmode changed properly */ + sc->sc_flags |= SC_OP_FULL_RESET; + } + + if ((changed & BSS_CHANGED_BSSID) && + !is_zero_ether_addr(bss_conf->bssid)) { + switch (vif->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + /* Set BSSID */ + memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN); + memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN); + sc->curaid = 0; + ath9k_hw_write_associd(sc); + + /* Set aggregation protection mode parameters */ + sc->config.ath_aggr_prot = 0; + + DPRINTF(sc, ATH_DBG_CONFIG, + "RX filter 0x%x bssid %pM aid 0x%x\n", + rfilt, sc->curbssid, sc->curaid); + + /* need to reconfigure the beacon */ + sc->sc_flags &= ~SC_OP_BEACONS ; + + break; + default: + break; + } + } + + if ((vif->type == NL80211_IFTYPE_ADHOC) || + (vif->type == NL80211_IFTYPE_AP) || + (vif->type == NL80211_IFTYPE_MESH_POINT)) { + if ((changed & BSS_CHANGED_BEACON) || + (changed & BSS_CHANGED_BEACON_ENABLED && + bss_conf->enable_beacon)) { + /* + * Allocate and setup the beacon frame. + * + * Stop any previous beacon DMA. This may be + * necessary, for example, when an ibss merge + * causes reconfiguration; we may be called + * with beacon transmission active. + */ + ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); + + error = ath_beacon_alloc(aphy, vif); + if (!error) + ath_beacon_config(sc, vif); + } + } + + /* Check for WLAN_CAPABILITY_PRIVACY ? */ + if ((avp->av_opmode != NL80211_IFTYPE_STATION)) { + for (i = 0; i < IEEE80211_WEP_NKID; i++) + if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) + ath9k_hw_keysetmac(sc->sc_ah, + (u16)i, + sc->curbssid); + } + + /* Only legacy IBSS for now */ + if (vif->type == NL80211_IFTYPE_ADHOC) + ath_update_chainmask(sc, 0); + if (changed & BSS_CHANGED_ERP_PREAMBLE) { DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n", bss_conf->use_short_preamble); @@ -2757,7 +2742,6 @@ struct ieee80211_ops ath9k_ops = { .add_interface = ath9k_add_interface, .remove_interface = ath9k_remove_interface, .config = ath9k_config, - .config_interface = ath9k_config_interface, .configure_filter = ath9k_configure_filter, .sta_notify = ath9k_sta_notify, .conf_tx = ath9k_conf_tx, diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 3c693e6ec904..2615aaf7df6a 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3543,12 +3543,38 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw, { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; + unsigned long flags; mutex_lock(&wl->mutex); dev = wl->current_dev; if (!dev || b43_status(dev) < B43_STAT_STARTED) goto out_unlock_mutex; + + B43_WARN_ON(wl->vif != vif); + + if (changed & BSS_CHANGED_BSSID) { + spin_lock_irqsave(&wl->irq_lock, flags); + if (conf->bssid) + memcpy(wl->bssid, conf->bssid, ETH_ALEN); + else + memset(wl->bssid, 0, ETH_ALEN); + + if (b43_status(dev) >= B43_STAT_INITIALIZED) { + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) { + B43_WARN_ON(vif->type != wl->if_type); + if (changed & BSS_CHANGED_BEACON) + b43_update_templates(wl); + } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) { + if (changed & BSS_CHANGED_BEACON) + b43_update_templates(wl); + } + b43_write_mac_bssid_templates(dev); + } + spin_unlock_irqrestore(&wl->irq_lock, flags); + } + b43_mac_suspend(dev); /* Update templates for AP/mesh mode. */ @@ -3571,8 +3597,6 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw, b43_mac_enable(dev); out_unlock_mutex: mutex_unlock(&wl->mutex); - - return; } static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, @@ -3730,41 +3754,6 @@ static void b43_op_configure_filter(struct ieee80211_hw *hw, spin_unlock_irqrestore(&wl->irq_lock, flags); } -static int b43_op_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct b43_wl *wl = hw_to_b43_wl(hw); - struct b43_wldev *dev = wl->current_dev; - unsigned long flags; - - if (!dev) - return -ENODEV; - mutex_lock(&wl->mutex); - spin_lock_irqsave(&wl->irq_lock, flags); - B43_WARN_ON(wl->vif != vif); - if (conf->bssid) - memcpy(wl->bssid, conf->bssid, ETH_ALEN); - else - memset(wl->bssid, 0, ETH_ALEN); - if (b43_status(dev) >= B43_STAT_INITIALIZED) { - if (b43_is_mode(wl, NL80211_IFTYPE_AP) || - b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) { - B43_WARN_ON(vif->type != wl->if_type); - if (conf->changed & IEEE80211_IFCC_BEACON) - b43_update_templates(wl); - } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) { - if (conf->changed & IEEE80211_IFCC_BEACON) - b43_update_templates(wl); - } - b43_write_mac_bssid_templates(dev); - } - spin_unlock_irqrestore(&wl->irq_lock, flags); - mutex_unlock(&wl->mutex); - - return 0; -} - /* Locking: wl->mutex */ static void b43_wireless_core_stop(struct b43_wldev *dev) { @@ -4434,7 +4423,6 @@ static const struct ieee80211_ops b43_hw_ops = { .remove_interface = b43_op_remove_interface, .config = b43_op_config, .bss_info_changed = b43_op_bss_info_changed, - .config_interface = b43_op_config_interface, .configure_filter = b43_op_configure_filter, .set_key = b43_op_set_key, .get_stats = b43_op_get_stats, diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 276f314688f7..07c7898c87ac 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2804,6 +2804,7 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw, u32 savedirqs; mutex_lock(&wl->mutex); + B43legacy_WARN_ON(wl->vif != vif); dev = wl->current_dev; phy = &dev->phy; @@ -2817,8 +2818,29 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw, goto out_unlock_mutex; } savedirqs = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL); - spin_unlock_irqrestore(&wl->irq_lock, flags); - b43legacy_synchronize_irq(dev); + + if (changed & BSS_CHANGED_BSSID) { + spin_unlock_irqrestore(&wl->irq_lock, flags); + b43legacy_synchronize_irq(dev); + + if (conf->bssid) + memcpy(wl->bssid, conf->bssid, ETH_ALEN); + else + memset(wl->bssid, 0, ETH_ALEN); + + if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) { + if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) { + B43legacy_WARN_ON(vif->type != NL80211_IFTYPE_AP); + if (changed & BSS_CHANGED_BEACON) + b43legacy_update_templates(wl); + } else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) { + if (changed & BSS_CHANGED_BEACON) + b43legacy_update_templates(wl); + } + b43legacy_write_mac_bssid_templates(dev); + } + spin_unlock_irqrestore(&wl->irq_lock, flags); + } b43legacy_mac_suspend(dev); @@ -2846,8 +2868,6 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw, spin_unlock_irqrestore(&wl->irq_lock, flags); out_unlock_mutex: mutex_unlock(&wl->mutex); - - return; } static void b43legacy_op_configure_filter(struct ieee80211_hw *hw, @@ -2889,40 +2909,6 @@ static void b43legacy_op_configure_filter(struct ieee80211_hw *hw, spin_unlock_irqrestore(&wl->irq_lock, flags); } -static int b43legacy_op_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); - struct b43legacy_wldev *dev = wl->current_dev; - unsigned long flags; - - if (!dev) - return -ENODEV; - mutex_lock(&wl->mutex); - spin_lock_irqsave(&wl->irq_lock, flags); - B43legacy_WARN_ON(wl->vif != vif); - if (conf->bssid) - memcpy(wl->bssid, conf->bssid, ETH_ALEN); - else - memset(wl->bssid, 0, ETH_ALEN); - if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) { - if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) { - B43legacy_WARN_ON(vif->type != NL80211_IFTYPE_AP); - if (conf->changed & IEEE80211_IFCC_BEACON) - b43legacy_update_templates(wl); - } else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) { - if (conf->changed & IEEE80211_IFCC_BEACON) - b43legacy_update_templates(wl); - } - b43legacy_write_mac_bssid_templates(dev); - } - spin_unlock_irqrestore(&wl->irq_lock, flags); - mutex_unlock(&wl->mutex); - - return 0; -} - /* Locking: wl->mutex */ static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev) { @@ -3563,7 +3549,6 @@ static const struct ieee80211_ops b43legacy_hw_ops = { .remove_interface = b43legacy_op_remove_interface, .config = b43legacy_op_dev_config, .bss_info_changed = b43legacy_op_bss_info_changed, - .config_interface = b43legacy_op_config_interface, .configure_filter = b43legacy_op_configure_filter, .get_stats = b43legacy_op_get_stats, .get_tx_stats = b43legacy_op_get_tx_stats, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 4920dcf7d7b0..dd8b15ed8296 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2623,7 +2623,6 @@ static struct ieee80211_ops iwl_hw_ops = { .add_interface = iwl_mac_add_interface, .remove_interface = iwl_mac_remove_interface, .config = iwl_mac_config, - .config_interface = iwl_mac_config_interface, .configure_filter = iwl_configure_filter, .set_key = iwl_mac_set_key, .update_tkip_key = iwl_mac_update_tkip_key, diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index cd8a5ed97c4f..0f21fc136ca7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2238,15 +2238,69 @@ static void iwl_ht_conf(struct iwl_priv *priv, #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) void iwl_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) { struct iwl_priv *priv = hw->priv; int ret; IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes); + if (!iwl_is_alive(priv)) + return; + + mutex_lock(&priv->mutex); + + if (changes & BSS_CHANGED_BEACON && + priv->iw_mode == NL80211_IFTYPE_AP) { + dev_kfree_skb(priv->ibss_beacon); + priv->ibss_beacon = ieee80211_beacon_get(hw, vif); + } + + if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) { + /* If there is currently a HW scan going on in the background + * then we need to cancel it else the RXON below will fail. */ + if (iwl_scan_cancel_timeout(priv, 100)) { + IWL_WARN(priv, "Aborted scan still in progress " + "after 100ms\n"); + IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); + mutex_unlock(&priv->mutex); + return; + } + memcpy(priv->staging_rxon.bssid_addr, + bss_conf->bssid, ETH_ALEN); + + /* TODO: Audit driver for usage of these members and see + * if mac80211 deprecates them (priv->bssid looks like it + * shouldn't be there, but I haven't scanned the IBSS code + * to verify) - jpk */ + memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + + if (priv->iw_mode == NL80211_IFTYPE_AP) + iwlcore_config_ap(priv); + else { + int rc = iwlcore_commit_rxon(priv); + if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc) + iwl_rxon_add_station( + priv, priv->active_rxon.bssid_addr, 1); + } + } else if (!iwl_is_rfkill(priv)) { + iwl_scan_cancel_timeout(priv, 100); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwlcore_commit_rxon(priv); + } + + if (priv->iw_mode == NL80211_IFTYPE_ADHOC && + changes & BSS_CHANGED_BEACON) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + + if (beacon) + iwl_mac_beacon_update(hw, beacon); + } + + mutex_unlock(&priv->mutex); + if (changes & BSS_CHANGED_ERP_PREAMBLE) { IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n", bss_conf->use_short_preamble); @@ -2305,7 +2359,7 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, &priv->staging_rxon, sizeof(struct iwl_rxon_cmd)); } - + IWL_DEBUG_MAC80211(priv, "leave\n"); } EXPORT_SYMBOL(iwl_bss_info_changed); @@ -2589,106 +2643,6 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) } EXPORT_SYMBOL(iwl_mac_config); -int iwl_mac_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - int rc; - - if (conf == NULL) - return -EIO; - - if (priv->vif != vif) { - IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n"); - return 0; - } - - if (priv->iw_mode == NL80211_IFTYPE_ADHOC && - conf->changed & IEEE80211_IFCC_BEACON) { - struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); - if (!beacon) - return -ENOMEM; - mutex_lock(&priv->mutex); - rc = iwl_mac_beacon_update(hw, beacon); - mutex_unlock(&priv->mutex); - if (rc) - return rc; - } - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - mutex_lock(&priv->mutex); - - if (conf->bssid) - IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid); - -/* - * very dubious code was here; the probe filtering flag is never set: - * - if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) && - !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { - */ - - if (priv->iw_mode == NL80211_IFTYPE_AP) { - if (!conf->bssid) { - conf->bssid = priv->mac_addr; - memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); - IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n", - conf->bssid); - } - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = ieee80211_beacon_get(hw, vif); - } - - if (iwl_is_rfkill(priv)) - goto done; - - if (conf->bssid && !is_zero_ether_addr(conf->bssid) && - !is_multicast_ether_addr(conf->bssid)) { - /* If there is currently a HW scan going on in the background - * then we need to cancel it else the RXON below will fail. */ - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress " - "after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - mutex_unlock(&priv->mutex); - return -EAGAIN; - } - memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN); - - /* TODO: Audit driver for usage of these members and see - * if mac80211 deprecates them (priv->bssid looks like it - * shouldn't be there, but I haven't scanned the IBSS code - * to verify) - jpk */ - memcpy(priv->bssid, conf->bssid, ETH_ALEN); - - if (priv->iw_mode == NL80211_IFTYPE_AP) - iwlcore_config_ap(priv); - else { - rc = iwlcore_commit_rxon(priv); - if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc) - iwl_rxon_add_station( - priv, priv->active_rxon.bssid_addr, 1); - } - - } else { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv); - } - - done: - IWL_DEBUG_MAC80211(priv, "leave\n"); - mutex_unlock(&priv->mutex); - - return 0; -} -EXPORT_SYMBOL(iwl_mac_config_interface); - int iwl_mac_get_tx_stats(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats) { diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index d4c60afa2891..bd7f9d9616bc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -281,9 +281,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); int iwl_mac_config(struct ieee80211_hw *hw, u32 changed); void iwl_config_ap(struct iwl_priv *priv); -int iwl_mac_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf); int iwl_mac_get_tx_stats(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats); void iwl_mac_reset_tsf(struct ieee80211_hw *hw); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index f9d9b65ef300..5cd4321d7cf5 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4106,7 +4106,6 @@ static struct ieee80211_ops iwl3945_hw_ops = { .add_interface = iwl_mac_add_interface, .remove_interface = iwl_mac_remove_interface, .config = iwl_mac_config, - .config_interface = iwl_mac_config_interface, .configure_filter = iwl_configure_filter, .set_key = iwl3945_mac_set_key, .get_tx_stats = iwl_mac_get_tx_stats, diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 68e47fb47a1e..10a99e26d392 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -366,36 +366,6 @@ static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed) return 0; } -static int lbtf_op_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct lbtf_private *priv = hw->priv; - struct sk_buff *beacon; - - switch (priv->vif->type) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_MESH_POINT: - beacon = ieee80211_beacon_get(hw, vif); - if (beacon) { - lbtf_beacon_set(priv, beacon); - kfree_skb(beacon); - lbtf_beacon_ctrl(priv, 1, vif->bss_conf.beacon_int); - } - break; - default: - break; - } - - if (conf->bssid) { - u8 null_bssid[ETH_ALEN] = {0}; - bool activate = compare_ether_addr(conf->bssid, null_bssid); - lbtf_set_bssid(priv, activate, conf->bssid); - } - - return 0; -} - #define SUPPORTED_FIF_FLAGS (FIF_PROMISC_IN_BSS | FIF_ALLMULTI) static void lbtf_op_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, @@ -451,6 +421,29 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw, u32 changes) { struct lbtf_private *priv = hw->priv; + struct sk_buff *beacon; + + if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_INT)) { + switch (priv->vif->type) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + beacon = ieee80211_beacon_get(hw, vif); + if (beacon) { + lbtf_beacon_set(priv, beacon); + kfree_skb(beacon); + lbtf_beacon_ctrl(priv, 1, + bss_conf->beacon_int); + } + break; + default: + break; + } + } + + if (changes & BSS_CHANGED_BSSID) { + bool activate = !is_zero_ether_addr(bss_conf->bssid); + lbtf_set_bssid(priv, activate, bss_conf->bssid); + } if (changes & BSS_CHANGED_ERP_PREAMBLE) { if (bss_conf->use_short_preamble) @@ -459,8 +452,6 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw, priv->preamble = CMD_TYPE_LONG_PREAMBLE; lbtf_set_radio_control(priv); } - - return; } static const struct ieee80211_ops lbtf_ops = { @@ -470,7 +461,6 @@ static const struct ieee80211_ops lbtf_ops = { .add_interface = lbtf_op_add_interface, .remove_interface = lbtf_op_remove_interface, .config = lbtf_op_config, - .config_interface = lbtf_op_config_interface, .configure_filter = lbtf_op_configure_filter, .bss_info_changed = lbtf_op_bss_info_changed, }; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 24c95a619e4c..e67b424f925e 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -587,23 +587,6 @@ static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw, *total_flags = data->rx_filter; } -static int mac80211_hwsim_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct hwsim_vif_priv *vp = (void *)vif->drv_priv; - - hwsim_check_magic(vif); - if (conf->changed & IEEE80211_IFCC_BSSID) { - DECLARE_MAC_BUF(mac); - printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n", - wiphy_name(hw->wiphy), __func__, - conf->bssid); - memcpy(vp->bssid, conf->bssid, ETH_ALEN); - } - return 0; -} - static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, @@ -617,6 +600,13 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, printk(KERN_DEBUG "%s:%s(changed=0x%x)\n", wiphy_name(hw->wiphy), __func__, changed); + if (changed & BSS_CHANGED_BSSID) { + printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n", + wiphy_name(hw->wiphy), __func__, + info->bssid); + memcpy(vp->bssid, info->bssid, ETH_ALEN); + } + if (changed & BSS_CHANGED_ASSOC) { printk(KERN_DEBUG " %s: ASSOC: assoc=%d aid=%d\n", wiphy_name(hw->wiphy), info->assoc, info->aid); @@ -708,7 +698,6 @@ static const struct ieee80211_ops mac80211_hwsim_ops = .remove_interface = mac80211_hwsim_remove_interface, .config = mac80211_hwsim_config, .configure_filter = mac80211_hwsim_configure_filter, - .config_interface = mac80211_hwsim_config_interface, .bss_info_changed = mac80211_hwsim_bss_info_changed, .sta_notify = mac80211_hwsim_sta_notify, .set_tim = mac80211_hwsim_set_tim, diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a9a970469c2a..46b288dc8f4d 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3089,19 +3089,6 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed) return rc ? -EINVAL : 0; } -static int mwl8k_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct mwl8k_vif *mv_vif = MWL8K_VIF(vif); - u32 changed = conf->changed; - - if (changed & IEEE80211_IFCC_BSSID) - memcpy(mv_vif->bssid, conf->bssid, IEEE80211_ADDR_LEN); - - return 0; -} - struct mwl8k_bss_info_changed_worker { struct mwl8k_work_struct header; struct ieee80211_vif *vif; @@ -3183,8 +3170,12 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw, { struct mwl8k_bss_info_changed_worker *worker; struct mwl8k_priv *priv = hw->priv; + struct mwl8k_vif *mv_vif = MWL8K_VIF(vif); int rc; + if (changed & BSS_CHANGED_BSSID) + memcpy(mv_vif->bssid, info->bssid, IEEE80211_ADDR_LEN); + if ((changed & BSS_CHANGED_ASSOC) == 0) return; @@ -3442,7 +3433,6 @@ static const struct ieee80211_ops mwl8k_ops = { .add_interface = mwl8k_add_interface, .remove_interface = mwl8k_remove_interface, .config = mwl8k_config, - .config_interface = mwl8k_config_interface, .bss_info_changed = mwl8k_bss_info_changed, .configure_filter = mwl8k_configure_filter, .set_rts_threshold = mwl8k_set_rts_threshold, diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 71394968d450..b85785291803 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -2204,41 +2204,6 @@ static int p54_config(struct ieee80211_hw *dev, u32 changed) return ret; } -static int p54_config_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct p54_common *priv = dev->priv; - int ret = 0; - - mutex_lock(&priv->conf_mutex); - if (conf->changed & IEEE80211_IFCC_BSSID) { - memcpy(priv->bssid, conf->bssid, ETH_ALEN); - ret = p54_setup_mac(dev); - if (ret) - goto out; - } - - if (conf->changed & IEEE80211_IFCC_BEACON) { - ret = p54_scan(dev, P54_SCAN_EXIT, 0); - if (ret) - goto out; - ret = p54_setup_mac(dev); - if (ret) - goto out; - ret = p54_beacon_update(dev, vif); - if (ret) - goto out; - ret = p54_set_edcf(dev); - if (ret) - goto out; - } - -out: - mutex_unlock(&priv->conf_mutex); - return ret; -} - static void p54_configure_filter(struct ieee80211_hw *dev, unsigned int changed_flags, unsigned int *total_flags, @@ -2342,8 +2307,32 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev, u32 changed) { struct p54_common *priv = dev->priv; + int ret; - if (changed & BSS_CHANGED_ERP_SLOT) { + mutex_lock(&priv->conf_mutex); + if (changed & BSS_CHANGED_BSSID) { + memcpy(priv->bssid, info->bssid, ETH_ALEN); + ret = p54_setup_mac(dev); + if (ret) + goto out; + } + + if (changed & BSS_CHANGED_BEACON) { + ret = p54_scan(dev, P54_SCAN_EXIT, 0); + if (ret) + goto out; + ret = p54_setup_mac(dev); + if (ret) + goto out; + ret = p54_beacon_update(dev, vif); + if (ret) + goto out; + } + /* XXX: this mimics having two callbacks... clean up */ + out: + mutex_unlock(&priv->conf_mutex); + + if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) { priv->use_short_slot = info->use_short_slot; p54_set_edcf(dev); } @@ -2364,7 +2353,6 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev, p54_setup_mac(dev); } } - } static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, @@ -2619,7 +2607,6 @@ static const struct ieee80211_ops p54_ops = { .sta_notify = p54_sta_notify, .set_key = p54_set_key, .config = p54_config, - .config_interface = p54_config_interface, .bss_info_changed = p54_bss_info_changed, .configure_filter = p54_configure_filter, .conf_tx = p54_conf_tx, diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 411eb9cbb4e5..6f39ba662188 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1580,7 +1580,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = { .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .bss_info_changed = rt2x00mac_bss_info_changed, diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index e1be67ca23d8..906960f67b6c 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1879,7 +1879,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = { .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .bss_info_changed = rt2x00mac_bss_info_changed, diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 9e630e70fc97..08e88333b0ff 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1908,7 +1908,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = { .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index e03d69975ea4..0be395528261 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -943,9 +943,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, void rt2x00mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed); -int rt2x00mac_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf); void rt2x00mac_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c41a0b9e473d..c4c06b4e1f08 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -390,56 +390,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed) } EXPORT_SYMBOL_GPL(rt2x00mac_config); -int rt2x00mac_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(vif); - int update_bssid = 0; - int status = 0; - - /* - * Mac80211 might be calling this function while we are trying - * to remove the device or perhaps suspending it. - */ - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - return 0; - - spin_lock(&intf->lock); - - /* - * conf->bssid can be NULL if coming from the internal - * beacon update routine. - */ - if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) { - update_bssid = 1; - memcpy(&intf->bssid, conf->bssid, ETH_ALEN); - } - - spin_unlock(&intf->lock); - - /* - * Call rt2x00_config_intf() outside of the spinlock context since - * the call will sleep for USB drivers. By using the ieee80211_if_conf - * values as arguments we make keep access to rt2x00_intf thread safe - * even without the lock. - */ - rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL, - update_bssid ? conf->bssid : NULL); - - /* - * Update the beacon. - */ - if (conf->changed & (IEEE80211_IFCC_BEACON | - IEEE80211_IFCC_BEACON_ENABLED)) - status = rt2x00queue_update_beacon(rt2x00dev, vif, - conf->enable_beacon); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00mac_config_interface); - void rt2x00mac_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, @@ -623,6 +573,44 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, struct rt2x00_dev *rt2x00dev = hw->priv; struct rt2x00_intf *intf = vif_to_intf(vif); unsigned int delayed = 0; + int update_bssid = 0; + + /* + * Mac80211 might be calling this function while we are trying + * to remove the device or perhaps suspending it. + */ + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return; + + spin_lock(&intf->lock); + + /* + * conf->bssid can be NULL if coming from the internal + * beacon update routine. + */ + if (changes & BSS_CHANGED_BSSID) { + update_bssid = 1; + memcpy(&intf->bssid, bss_conf->bssid, ETH_ALEN); + } + + spin_unlock(&intf->lock); + + /* + * Call rt2x00_config_intf() outside of the spinlock context since + * the call will sleep for USB drivers. By using the ieee80211_if_conf + * values as arguments we make keep access to rt2x00_intf thread safe + * even without the lock. + */ + if (changes & BSS_CHANGED_BSSID) + rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL, + update_bssid ? bss_conf->bssid : NULL); + + /* + * Update the beacon. + */ + if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) + rt2x00queue_update_beacon(rt2x00dev, vif, + bss_conf->enable_beacon); /* * When the association status has changed we must reset the link diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 4346cd1494bc..cb521ee7a8f0 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2735,7 +2735,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 853b2b279b64..6bd28a6bcef2 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2259,7 +2259,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index 387c133ec0f2..7e65d7c31802 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -702,30 +702,26 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed) return 0; } -static int rtl8180_config_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct rtl8180_priv *priv = dev->priv; - int i; - - for (i = 0; i < ETH_ALEN; i++) - rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]); - - if (is_valid_ether_addr(conf->bssid)) - rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA); - else - rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK); - - return 0; -} - static void rtl8180_bss_info_changed(struct ieee80211_hw *dev, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, u32 changed) { struct rtl8180_priv *priv = dev->priv; + int i; + + if (changed & BSS_CHANGED_BSSID) { + for (i = 0; i < ETH_ALEN; i++) + rtl818x_iowrite8(priv, &priv->map->BSSID[i], + info->bssid[i]); + + if (is_valid_ether_addr(info->bssid)) + rtl818x_iowrite8(priv, &priv->map->MSR, + RTL818X_MSR_INFRA); + else + rtl818x_iowrite8(priv, &priv->map->MSR, + RTL818X_MSR_NO_LINK); + } if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp) priv->rf->conf_erp(dev, info); @@ -770,7 +766,6 @@ static const struct ieee80211_ops rtl8180_ops = { .add_interface = rtl8180_add_interface, .remove_interface = rtl8180_remove_interface, .config = rtl8180_config, - .config_interface = rtl8180_config_interface, .bss_info_changed = rtl8180_bss_info_changed, .configure_filter = rtl8180_configure_filter, }; diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index ac558da92aac..158827e50c55 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -1090,32 +1090,6 @@ static int rtl8187_config(struct ieee80211_hw *dev, u32 changed) return 0; } -static int rtl8187_config_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct rtl8187_priv *priv = dev->priv; - int i; - u8 reg; - - mutex_lock(&priv->conf_mutex); - for (i = 0; i < ETH_ALEN; i++) - rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]); - - if (is_valid_ether_addr(conf->bssid)) { - reg = RTL818X_MSR_INFRA; - if (priv->is_rtl8187b) - reg |= RTL818X_MSR_ENEDCA; - rtl818x_iowrite8(priv, &priv->map->MSR, reg); - } else { - reg = RTL818X_MSR_NO_LINK; - rtl818x_iowrite8(priv, &priv->map->MSR, reg); - } - - mutex_unlock(&priv->conf_mutex); - return 0; -} - /* * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for * example. Thus we have to use raw values for AC_*_PARAM register addresses. @@ -1193,6 +1167,27 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev, u32 changed) { struct rtl8187_priv *priv = dev->priv; + int i; + u8 reg; + + if (changed & BSS_CHANGED_BSSID) { + mutex_lock(&priv->conf_mutex); + for (i = 0; i < ETH_ALEN; i++) + rtl818x_iowrite8(priv, &priv->map->BSSID[i], + info->bssid[i]); + + if (is_valid_ether_addr(info->bssid)) { + reg = RTL818X_MSR_INFRA; + if (priv->is_rtl8187b) + reg |= RTL818X_MSR_ENEDCA; + rtl818x_iowrite8(priv, &priv->map->MSR, reg); + } else { + reg = RTL818X_MSR_NO_LINK; + rtl818x_iowrite8(priv, &priv->map->MSR, reg); + } + + mutex_unlock(&priv->conf_mutex); + } if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) rtl8187_conf_erp(priv, info->use_short_slot, @@ -1274,7 +1269,6 @@ static const struct ieee80211_ops rtl8187_ops = { .add_interface = rtl8187_add_interface, .remove_interface = rtl8187_remove_interface, .config = rtl8187_config, - .config_interface = rtl8187_config_interface, .bss_info_changed = rtl8187_bss_info_changed, .configure_filter = rtl8187_configure_filter, .conf_tx = rtl8187_conf_tx diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index c3a51266de20..6bdb1704083b 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -755,52 +755,6 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed) return zd_chip_set_channel(&mac->chip, conf->channel->hw_value); } -static int zd_op_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct zd_mac *mac = zd_hw_mac(hw); - int associated; - int r; - - if (mac->type == NL80211_IFTYPE_MESH_POINT || - mac->type == NL80211_IFTYPE_ADHOC) { - associated = true; - if (conf->changed & IEEE80211_IFCC_BEACON) { - struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); - - if (!beacon) - return -ENOMEM; - r = zd_mac_config_beacon(hw, beacon); - kfree_skb(beacon); - - if (r < 0) - return r; - } - - if (conf->changed & IEEE80211_IFCC_BEACON_ENABLED) { - u32 interval; - - if (conf->enable_beacon) - interval = BCN_MODE_IBSS | hw->conf.beacon_int; - else - interval = 0; - - r = zd_set_beacon_interval(&mac->chip, interval); - if (r < 0) - return r; - } - } else - associated = is_valid_ether_addr(conf->bssid); - - spin_lock_irq(&mac->lock); - mac->associated = associated; - spin_unlock_irq(&mac->lock); - - /* TODO: do hardware bssid filtering */ - return 0; -} - static void zd_process_intr(struct work_struct *work) { u16 int_status; @@ -923,9 +877,42 @@ static void zd_op_bss_info_changed(struct ieee80211_hw *hw, { struct zd_mac *mac = zd_hw_mac(hw); unsigned long flags; + int associated; dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes); + if (mac->type == NL80211_IFTYPE_MESH_POINT || + mac->type == NL80211_IFTYPE_ADHOC) { + associated = true; + if (changes & BSS_CHANGED_BEACON) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + + if (beacon) { + zd_mac_config_beacon(hw, beacon); + kfree_skb(beacon); + } + } + + if (changes & BSS_CHANGED_BEACON_ENABLED) { + u32 interval; + + if (bss_conf->enable_beacon) + interval = BCN_MODE_IBSS | + bss_conf->beacon_int; + else + interval = 0; + + zd_set_beacon_interval(&mac->chip, interval); + } + } else + associated = is_valid_ether_addr(bss_conf->bssid); + + spin_lock_irq(&mac->lock); + mac->associated = associated; + spin_unlock_irq(&mac->lock); + + /* TODO: do hardware bssid filtering */ + if (changes & BSS_CHANGED_ERP_PREAMBLE) { spin_lock_irqsave(&mac->lock, flags); mac->short_preamble = bss_conf->use_short_preamble; @@ -952,7 +939,6 @@ static const struct ieee80211_ops zd_ops = { .add_interface = zd_op_add_interface, .remove_interface = zd_op_remove_interface, .config = zd_op_config, - .config_interface = zd_op_config_interface, .configure_filter = zd_op_configure_filter, .bss_info_changed = zd_op_bss_info_changed, .get_tsf = zd_op_get_tsf, diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 22c65e8cbb71..7806e22f4ace 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -150,6 +150,12 @@ struct ieee80211_low_level_stats { * @BSS_CHANGED_HT: 802.11n parameters changed * @BSS_CHANGED_BASIC_RATES: Basic rateset changed * @BSS_CHANGED_BEACON_INT: Beacon interval changed + * @BSS_CHANGED_BSSID: BSSID changed, for whatever + * reason (IBSS and managed mode) + * @BSS_CHANGED_BEACON: Beacon data changed, retrieve + * new beacon (beaconing modes) + * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be + * enabled/disabled (beaconing modes) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -159,6 +165,9 @@ enum ieee80211_bss_change { BSS_CHANGED_HT = 1<<4, BSS_CHANGED_BASIC_RATES = 1<<5, BSS_CHANGED_BEACON_INT = 1<<6, + BSS_CHANGED_BSSID = 1<<7, + BSS_CHANGED_BEACON = 1<<8, + BSS_CHANGED_BEACON_ENABLED = 1<<9, }; /** @@ -192,8 +201,11 @@ struct ieee80211_bss_ht_conf { * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. + * @bssid: The BSSID for this BSS + * @enable_beacon: whether beaconing should be enabled or not */ struct ieee80211_bss_conf { + const u8 *bssid; /* association related data */ bool assoc; u16 aid; @@ -201,6 +213,7 @@ struct ieee80211_bss_conf { bool use_cts_prot; bool use_short_preamble; bool use_short_slot; + bool enable_beacon; u8 dtim_period; u16 beacon_int; u16 assoc_capability; @@ -659,37 +672,6 @@ struct ieee80211_if_init_conf { void *mac_addr; }; -/** - * enum ieee80211_if_conf_change - interface config change flags - * - * @IEEE80211_IFCC_BSSID: The BSSID changed. - * @IEEE80211_IFCC_BEACON: The beacon for this interface changed - * (currently AP and MESH only), use ieee80211_beacon_get(). - * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed. - */ -enum ieee80211_if_conf_change { - IEEE80211_IFCC_BSSID = BIT(0), - IEEE80211_IFCC_BEACON = BIT(1), - IEEE80211_IFCC_BEACON_ENABLED = BIT(2), -}; - -/** - * struct ieee80211_if_conf - configuration of an interface - * - * @changed: parameters that have changed, see &enum ieee80211_if_conf_change. - * @bssid: BSSID of the network we are associated to/creating. - * @enable_beacon: Indicates whether beacons can be sent. - * This is valid only for AP/IBSS/MESH modes. - * - * This structure is passed to the config_interface() callback of - * &struct ieee80211_hw. - */ -struct ieee80211_if_conf { - u32 changed; - const u8 *bssid; - bool enable_beacon; -}; - /** * enum ieee80211_key_alg - key algorithm * @ALG_WEP: WEP40 or WEP104 @@ -1358,10 +1340,6 @@ enum ieee80211_ampdu_mlme_action { * This function should never fail but returns a negative error code * if it does. * - * @config_interface: Handler for configuration requests related to interfaces - * (e.g. BSSID changes.) - * Returns a negative error code which will be seen in userspace. - * * @bss_info_changed: Handler for configuration requests related to BSS * parameters that may vary during BSS's lifespan, and may affect low * level driver (e.g. assoc/disassoc status, erp parameters). @@ -1463,9 +1441,6 @@ struct ieee80211_ops { void (*remove_interface)(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); int (*config)(struct ieee80211_hw *hw, u32 changed); - int (*config_interface)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf); void (*bss_info_changed)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index a898ccd3f2c9..648bac1c850e 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -521,8 +521,9 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, kfree(old); - return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON | - IEEE80211_IFCC_BEACON_ENABLED); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_BEACON); + return 0; } static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, @@ -573,7 +574,8 @@ static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev) synchronize_rcu(); kfree(old); - return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + return 0; } /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */ diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index f4879dad3cd7..c87caad383f0 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -95,17 +95,10 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; - ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID); - local->oper_channel = chan; local->oper_channel_type = NL80211_CHAN_NO_HT; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); - sdata->vif.bss_conf.beacon_int = beacon_int; - bss_change = BSS_CHANGED_BEACON_INT; - bss_change |= ieee80211_reset_erp_info(sdata); - ieee80211_bss_info_change_notify(sdata, bss_change); - sband = local->hw.wiphy->bands[chan->band]; /* Build IBSS probe response */ @@ -161,8 +154,13 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, rcu_assign_pointer(ifibss->presp, skb); - ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON | - IEEE80211_IFCC_BEACON_ENABLED); + sdata->vif.bss_conf.beacon_int = beacon_int; + bss_change = BSS_CHANGED_BEACON_INT; + bss_change |= ieee80211_reset_erp_info(sdata); + bss_change |= BSS_CHANGED_BSSID; + bss_change |= BSS_CHANGED_BEACON; + bss_change |= BSS_CHANGED_BEACON_ENABLED; + ieee80211_bss_info_change_notify(sdata, bss_change); rates = 0; for (i = 0; i < supp_rates_len; i++) { @@ -887,7 +885,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) kfree(sdata->u.ibss.ie); skb = sdata->u.ibss.presp; rcu_assign_pointer(sdata->u.ibss.presp, NULL); - ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); synchronize_rcu(); kfree_skb(skb); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e6fd4bcf1c3c..d8de1e159ee0 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -906,7 +906,6 @@ static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr) int ieee80211_hw_config(struct ieee80211_local *local, u32 changed); -int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed); void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx); void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, u32 changed); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index b254879d8631..c817c9ef215a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -152,82 +152,6 @@ static void ieee80211_master_set_multicast_list(struct net_device *dev) ieee80211_configure_filter(local); } -/* everything else */ - -int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed) -{ - struct ieee80211_local *local = sdata->local; - struct ieee80211_if_conf conf; - - if (WARN_ON(!netif_running(sdata->dev))) - return 0; - - memset(&conf, 0, sizeof(conf)); - - if (sdata->vif.type == NL80211_IFTYPE_STATION) - conf.bssid = sdata->u.mgd.bssid; - else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) - conf.bssid = sdata->u.ibss.bssid; - else if (sdata->vif.type == NL80211_IFTYPE_AP) - conf.bssid = sdata->dev->dev_addr; - else if (ieee80211_vif_is_mesh(&sdata->vif)) { - static const u8 zero[ETH_ALEN] = { 0 }; - conf.bssid = zero; - } else { - WARN_ON(1); - return -EINVAL; - } - - if (!local->ops->config_interface) - return 0; - - switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_MESH_POINT: - break; - default: - /* do not warn to simplify caller in scan.c */ - changed &= ~IEEE80211_IFCC_BEACON_ENABLED; - if (WARN_ON(changed & IEEE80211_IFCC_BEACON)) - return -EINVAL; - changed &= ~IEEE80211_IFCC_BEACON; - break; - } - - if (changed & IEEE80211_IFCC_BEACON_ENABLED) { - if (local->sw_scanning) { - conf.enable_beacon = false; - } else { - /* - * Beacon should be enabled, but AP mode must - * check whether there is a beacon configured. - */ - switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: - conf.enable_beacon = - !!rcu_dereference(sdata->u.ap.beacon); - break; - case NL80211_IFTYPE_ADHOC: - conf.enable_beacon = !!sdata->u.ibss.presp; - break; - case NL80211_IFTYPE_MESH_POINT: - conf.enable_beacon = true; - break; - default: - /* not reached */ - WARN_ON(1); - break; - } - } - } - - conf.changed = changed; - - return local->ops->config_interface(local_to_hw(local), - &sdata->vif, &conf); -} - int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) { struct ieee80211_channel *chan; @@ -297,6 +221,61 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, if (!changed) return; + if (sdata->vif.type == NL80211_IFTYPE_STATION) + sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid; + else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) + sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; + else if (sdata->vif.type == NL80211_IFTYPE_AP) + sdata->vif.bss_conf.bssid = sdata->dev->dev_addr; + else if (ieee80211_vif_is_mesh(&sdata->vif)) { + static const u8 zero[ETH_ALEN] = { 0 }; + sdata->vif.bss_conf.bssid = zero; + } else { + WARN_ON(1); + return; + } + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + break; + default: + /* do not warn to simplify caller in scan.c */ + changed &= ~BSS_CHANGED_BEACON_ENABLED; + if (WARN_ON(changed & BSS_CHANGED_BEACON)) + return; + break; + } + + if (changed & BSS_CHANGED_BEACON_ENABLED) { + if (local->sw_scanning) { + sdata->vif.bss_conf.enable_beacon = false; + } else { + /* + * Beacon should be enabled, but AP mode must + * check whether there is a beacon configured. + */ + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP: + sdata->vif.bss_conf.enable_beacon = + !!rcu_dereference(sdata->u.ap.beacon); + break; + case NL80211_IFTYPE_ADHOC: + sdata->vif.bss_conf.enable_beacon = + !!rcu_dereference(sdata->u.ibss.presp); + break; + case NL80211_IFTYPE_MESH_POINT: + sdata->vif.bss_conf.enable_beacon = true; + break; + default: + /* not reached */ + WARN_ON(1); + break; + } + } + } + if (local->ops->bss_info_changed) local->ops->bss_info_changed(local_to_hw(local), &sdata->vif, diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 9a3e5de0410a..9000b01a1671 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -417,7 +417,7 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, free_plinks = mesh_plink_availables(sdata); if (free_plinks != sdata->u.mesh.accepting_plinks) - ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); ifmsh->housekeeping = false; mod_timer(&ifmsh->housekeeping_timer, @@ -432,8 +432,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) ifmsh->housekeeping = true; queue_work(local->hw.workqueue, &ifmsh->work); - ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON | - IEEE80211_IFCC_BEACON_ENABLED); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED); } void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index bfd571e6f221..c7971196d9d5 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2289,12 +2289,8 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid) ifmgd->flags &= ~IEEE80211_STA_BSSID_SET; } - if (netif_running(sdata->dev)) { - if (ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID)) { - printk(KERN_DEBUG "%s: Failed to config new BSSID to " - "the low-level driver\n", sdata->dev->name); - } - } + if (netif_running(sdata->dev)) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); return ieee80211_sta_commit(sdata); } diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 086d21645cbc..04e270abdd22 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -346,8 +346,8 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) if (sdata->vif.type == NL80211_IFTYPE_AP || sdata->vif.type == NL80211_IFTYPE_ADHOC || sdata->vif.type == NL80211_IFTYPE_MESH_POINT) - ieee80211_if_config(sdata, - IEEE80211_IFCC_BEACON_ENABLED); + ieee80211_bss_info_change_notify( + sdata, BSS_CHANGED_BEACON_ENABLED); } mutex_unlock(&local->iflist_mtx); @@ -387,8 +387,8 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) if (sdata->vif.type == NL80211_IFTYPE_AP || sdata->vif.type == NL80211_IFTYPE_ADHOC || sdata->vif.type == NL80211_IFTYPE_MESH_POINT) - ieee80211_if_config(sdata, - IEEE80211_IFCC_BEACON_ENABLED); + ieee80211_bss_info_change_notify( + sdata, BSS_CHANGED_BEACON_ENABLED); if (sdata->vif.type == NL80211_IFTYPE_STATION) { if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) { diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 61876eb50b49..2cde9bbfe7d9 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1063,24 +1063,13 @@ int ieee80211_reconfig(struct ieee80211_local *local) switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: /* disable beacon change bits */ - changed &= ~IEEE80211_IFCC_BEACON; + changed &= ~(BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED); /* fall through */ case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: case NL80211_IFTYPE_MESH_POINT: - /* - * Driver's config_interface can fail if rfkill is - * enabled. Accommodate this return code. - * FIXME: When mac80211 has knowledge of rfkill - * state the code below can change back to: - * WARN(ieee80211_if_config(sdata, changed)); - * ieee80211_bss_info_change_notify(sdata, ~0); - */ - if (ieee80211_if_config(sdata, changed)) - printk(KERN_DEBUG "%s: failed to configure interface during resume\n", - sdata->dev->name); - else - ieee80211_bss_info_change_notify(sdata, ~0); + ieee80211_bss_info_change_notify(sdata, changed); break; case NL80211_IFTYPE_WDS: break; From 2448798133d747ad339e57099e32a1d1e68aca1c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 18:52:52 +0200 Subject: [PATCH 08/68] mac80211: add driver ops wrappers In order to later add tracing or verifications to the driver calls mac80211 makes, this patch adds static inline wrappers for all operations. All calls are now written as drv_(local, ...); instead of local->ops->(&local->hw, ...); Where necessary, the wrappers also do existence checking and return default values as appropriate. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-rx.c | 11 ++- net/mac80211/agg-tx.c | 13 +-- net/mac80211/cfg.c | 24 +++-- net/mac80211/debugfs.c | 20 ++--- net/mac80211/driver-ops.h | 184 ++++++++++++++++++++++++++++++++++++++ net/mac80211/ibss.c | 26 +++--- net/mac80211/iface.c | 22 +++-- net/mac80211/key.c | 8 +- net/mac80211/main.c | 17 ++-- net/mac80211/mlme.c | 14 ++- net/mac80211/pm.c | 9 +- net/mac80211/rx.c | 9 +- net/mac80211/scan.c | 28 +++--- net/mac80211/sta_info.c | 14 ++- net/mac80211/tkip.c | 6 +- net/mac80211/tx.c | 3 +- net/mac80211/util.c | 14 +-- 17 files changed, 292 insertions(+), 130 deletions(-) create mode 100644 net/mac80211/driver-ops.h diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index 07656d830bc4..fff24c3d6460 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -16,12 +16,12 @@ #include #include #include "ieee80211_i.h" +#include "driver-ops.h" void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, u16 initiator, u16 reason) { struct ieee80211_local *local = sta->local; - struct ieee80211_hw *hw = &local->hw; int i; /* check if TID is in operational state */ @@ -41,8 +41,8 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, sta->sta.addr, tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - if (local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_STOP, - &sta->sta, tid, NULL)) + if (drv_ampdu_action(local, IEEE80211_AMPDU_RX_STOP, + &sta->sta, tid, NULL)) printk(KERN_DEBUG "HW problem - can not stop rx " "aggregation for tid %d\n", tid); @@ -278,9 +278,8 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, goto end; } - if (local->ops->ampdu_action) - ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START, - &sta->sta, tid, &start_seq_num); + ret = drv_ampdu_action(local, IEEE80211_AMPDU_RX_START, + &sta->sta, tid, &start_seq_num); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret); #endif /* CONFIG_MAC80211_HT_DEBUG */ diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 947aaaad35d2..43d00ffd3988 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -16,6 +16,7 @@ #include #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "wme.h" /** @@ -134,8 +135,8 @@ static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, *state = HT_AGG_STATE_REQ_STOP_BA_MSK | (initiator << HT_AGG_STATE_INITIATOR_SHIFT); - ret = local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_STOP, - &sta->sta, tid, NULL); + ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_STOP, + &sta->sta, tid, NULL); /* HW shall not deny going back to legacy */ if (WARN_ON(ret)) { @@ -306,8 +307,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid) start_seq_num = sta->tid_seq[tid]; - ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START, - &sta->sta, tid, &start_seq_num); + ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_START, + &sta->sta, tid, &start_seq_num); if (ret) { #ifdef CONFIG_MAC80211_HT_DEBUG @@ -418,8 +419,8 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local, ieee80211_agg_splice_finish(local, sta, tid); spin_unlock(&local->ampdu_lock); - local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_OPERATIONAL, - &sta->sta, tid, NULL); + drv_ampdu_action(local, IEEE80211_AMPDU_TX_OPERATIONAL, + &sta->sta, tid, NULL); } void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 648bac1c850e..d0ca6da33ca9 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -13,6 +13,7 @@ #include #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "cfg.h" #include "rate.h" #include "mesh.h" @@ -245,12 +246,10 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, iv32 = key->u.tkip.tx.iv32; iv16 = key->u.tkip.tx.iv16; - if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE && - sdata->local->ops->get_tkip_seq) - sdata->local->ops->get_tkip_seq( - local_to_hw(sdata->local), - key->conf.hw_key_idx, - &iv32, &iv16); + if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) + drv_get_tkip_seq(sdata->local, + key->conf.hw_key_idx, + &iv32, &iv16); seq[0] = iv16 & 0xff; seq[1] = (iv16 >> 8) & 0xff; @@ -1115,7 +1114,7 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy, p.cw_max = params->cwmax; p.cw_min = params->cwmin; p.txop = params->txop; - if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) { + if (drv_conf_tx(local, params->queue, &p)) { printk(KERN_DEBUG "%s: failed to set TX queue " "parameters for queue %d\n", local->mdev->name, params->queue); @@ -1296,16 +1295,13 @@ static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) { struct ieee80211_local *local = wiphy_priv(wiphy); + int err; if (changed & WIPHY_PARAM_RTS_THRESHOLD) { - int err; + err = drv_set_rts_threshold(local, wiphy->rts_threshold); - if (local->ops->set_rts_threshold) { - err = local->ops->set_rts_threshold( - local_to_hw(local), wiphy->rts_threshold); - if (err) - return err; - } + if (err) + return err; } if (changed & WIPHY_PARAM_RETRY_SHORT) diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 5001328be46b..ac793201b701 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -10,6 +10,7 @@ #include #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "rate.h" #include "debugfs.h" @@ -70,11 +71,10 @@ static ssize_t tsf_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { struct ieee80211_local *local = file->private_data; - u64 tsf = 0; + u64 tsf; char buf[100]; - if (local->ops->get_tsf) - tsf = local->ops->get_tsf(local_to_hw(local)); + tsf = drv_get_tsf(local); snprintf(buf, sizeof(buf), "0x%016llx\n", (unsigned long long) tsf); @@ -97,13 +97,13 @@ static ssize_t tsf_write(struct file *file, if (strncmp(buf, "reset", 5) == 0) { if (local->ops->reset_tsf) { - local->ops->reset_tsf(local_to_hw(local)); + drv_reset_tsf(local); printk(KERN_INFO "%s: debugfs reset TSF\n", wiphy_name(local->hw.wiphy)); } } else { tsf = simple_strtoul(buf, NULL, 0); if (local->ops->set_tsf) { - local->ops->set_tsf(local_to_hw(local), tsf); + drv_set_tsf(local, tsf); printk(KERN_INFO "%s: debugfs set TSF to %#018llx\n", wiphy_name(local->hw.wiphy), tsf); } } @@ -150,14 +150,12 @@ static ssize_t format_devstat_counter(struct ieee80211_local *local, char buf[20]; int res; - if (!local->ops->get_stats) - return -EOPNOTSUPP; - rtnl_lock(); - res = local->ops->get_stats(local_to_hw(local), &stats); + res = drv_get_stats(local, &stats); rtnl_unlock(); - if (!res) - res = printvalue(&stats, buf, sizeof(buf)); + if (res) + return res; + res = printvalue(&stats, buf, sizeof(buf)); return simple_read_from_buffer(userbuf, count, ppos, buf, res); } diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h new file mode 100644 index 000000000000..3912b5334b9c --- /dev/null +++ b/net/mac80211/driver-ops.h @@ -0,0 +1,184 @@ +#ifndef __MAC80211_DRIVER_OPS +#define __MAC80211_DRIVER_OPS + +#include +#include "ieee80211_i.h" + +static inline int drv_tx(struct ieee80211_local *local, struct sk_buff *skb) +{ + return local->ops->tx(&local->hw, skb); +} + +static inline int drv_start(struct ieee80211_local *local) +{ + return local->ops->start(&local->hw); +} + +static inline void drv_stop(struct ieee80211_local *local) +{ + local->ops->stop(&local->hw); +} + +static inline int drv_add_interface(struct ieee80211_local *local, + struct ieee80211_if_init_conf *conf) +{ + return local->ops->add_interface(&local->hw, conf); +} + +static inline void drv_remove_interface(struct ieee80211_local *local, + struct ieee80211_if_init_conf *conf) +{ + local->ops->remove_interface(&local->hw, conf); +} + +static inline int drv_config(struct ieee80211_local *local, u32 changed) +{ + return local->ops->config(&local->hw, changed); +} + +static inline void drv_bss_info_changed(struct ieee80211_local *local, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u32 changed) +{ + if (local->ops->bss_info_changed) + local->ops->bss_info_changed(&local->hw, vif, info, changed); +} + +static inline void drv_configure_filter(struct ieee80211_local *local, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, + struct dev_addr_list *mc_list) +{ + local->ops->configure_filter(&local->hw, changed_flags, total_flags, + mc_count, mc_list); +} + +static inline int drv_set_tim(struct ieee80211_local *local, + struct ieee80211_sta *sta, bool set) +{ + if (local->ops->set_tim) + return local->ops->set_tim(&local->hw, sta, set); + return 0; +} + +static inline int drv_set_key(struct ieee80211_local *local, + enum set_key_cmd cmd, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + return local->ops->set_key(&local->hw, cmd, vif, sta, key); +} + +static inline void drv_update_tkip_key(struct ieee80211_local *local, + struct ieee80211_key_conf *conf, + const u8 *address, u32 iv32, + u16 *phase1key) +{ + if (local->ops->update_tkip_key) + local->ops->update_tkip_key(&local->hw, conf, address, + iv32, phase1key); +} + +static inline int drv_hw_scan(struct ieee80211_local *local, + struct cfg80211_scan_request *req) +{ + return local->ops->hw_scan(&local->hw, req); +} + +static inline void drv_sw_scan_start(struct ieee80211_local *local) +{ + if (local->ops->sw_scan_start) + local->ops->sw_scan_start(&local->hw); +} + +static inline void drv_sw_scan_complete(struct ieee80211_local *local) +{ + if (local->ops->sw_scan_complete) + local->ops->sw_scan_complete(&local->hw); +} + +static inline int drv_get_stats(struct ieee80211_local *local, + struct ieee80211_low_level_stats *stats) +{ + if (!local->ops->get_stats) + return -EOPNOTSUPP; + return local->ops->get_stats(&local->hw, stats); +} + +static inline void drv_get_tkip_seq(struct ieee80211_local *local, + u8 hw_key_idx, u32 *iv32, u16 *iv16) +{ + if (local->ops->get_tkip_seq) + local->ops->get_tkip_seq(&local->hw, hw_key_idx, iv32, iv16); +} + +static inline int drv_set_rts_threshold(struct ieee80211_local *local, + u32 value) +{ + if (local->ops->set_rts_threshold) + return local->ops->set_rts_threshold(&local->hw, value); + return 0; +} + +static inline void drv_sta_notify(struct ieee80211_local *local, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + struct ieee80211_sta *sta) +{ + if (local->ops->sta_notify) + local->ops->sta_notify(&local->hw, vif, cmd, sta); +} + +static inline int drv_conf_tx(struct ieee80211_local *local, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + if (local->ops->conf_tx) + return local->ops->conf_tx(&local->hw, queue, params); + return -EOPNOTSUPP; +} + +static inline int drv_get_tx_stats(struct ieee80211_local *local, + struct ieee80211_tx_queue_stats *stats) +{ + return local->ops->get_tx_stats(&local->hw, stats); +} + +static inline u64 drv_get_tsf(struct ieee80211_local *local) +{ + if (local->ops->get_tsf) + return local->ops->get_tsf(&local->hw); + return -1ULL; +} + +static inline void drv_set_tsf(struct ieee80211_local *local, u64 tsf) +{ + if (local->ops->set_tsf) + local->ops->set_tsf(&local->hw, tsf); +} + +static inline void drv_reset_tsf(struct ieee80211_local *local) +{ + if (local->ops->reset_tsf) + local->ops->reset_tsf(&local->hw); +} + +static inline int drv_tx_last_beacon(struct ieee80211_local *local) +{ + if (local->ops->tx_last_beacon) + return local->ops->tx_last_beacon(&local->hw); + return 1; +} + +static inline int drv_ampdu_action(struct ieee80211_local *local, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, + u16 *ssn) +{ + if (local->ops->ampdu_action) + return local->ops->ampdu_action(&local->hw, action, + sta, tid, ssn); + return -EOPNOTSUPP; +} +#endif /* __MAC80211_DRIVER_OPS */ diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index c87caad383f0..a8e23232267e 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -22,6 +22,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "rate.h" #define IEEE80211_SCAN_INTERVAL (2 * HZ) @@ -75,10 +76,9 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband; u32 bss_change; - if (local->ops->reset_tsf) { - /* Reset own TSF to allow time synchronization work. */ - local->ops->reset_tsf(local_to_hw(local)); - } + + /* Reset own TSF to allow time synchronization work. */ + drv_reset_tsf(local); skb = ifibss->skb; rcu_assign_pointer(ifibss->presp, NULL); @@ -315,12 +315,13 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, bitrates[rx_status->rate_idx].bitrate; rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate); - } else if (local && local->ops && local->ops->get_tsf) - /* second best option: get current TSF */ - rx_timestamp = local->ops->get_tsf(local_to_hw(local)); - else - /* can't merge without knowing the TSF */ - rx_timestamp = -1LLU; + } else { + /* + * second best option: get current TSF + * (will return -1 if not supported) + */ + rx_timestamp = drv_get_tsf(local); + } #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG "RX beacon SA=%pM BSSID=" @@ -591,10 +592,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata, len < 24 + 2 || !ifibss->presp) return; - if (local->ops->tx_last_beacon) - tx_last_beacon = local->ops->tx_last_beacon(local_to_hw(local)); - else - tx_last_beacon = 1; + tx_last_beacon = drv_tx_last_beacon(local); #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG "%s: RX ProbeReq SA=%pM DA=%pM BSSID=%pM" diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 52425975bbbe..256fa19e14ec 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -20,6 +20,7 @@ #include "debugfs_netdev.h" #include "mesh.h" #include "led.h" +#include "driver-ops.h" /** * DOC: Interface list locking @@ -164,9 +165,7 @@ static int ieee80211_open(struct net_device *dev) } if (local->open_count == 0) { - res = 0; - if (local->ops->start) - res = local->ops->start(local_to_hw(local)); + res = drv_start(local); if (res) goto err_del_bss; /* we're brought up, everything changes */ @@ -199,8 +198,8 @@ static int ieee80211_open(struct net_device *dev) * Validate the MAC address for this device. */ if (!is_valid_ether_addr(dev->dev_addr)) { - if (!local->open_count && local->ops->stop) - local->ops->stop(local_to_hw(local)); + if (!local->open_count) + drv_stop(local); return -EADDRNOTAVAIL; } @@ -241,7 +240,7 @@ static int ieee80211_open(struct net_device *dev) conf.vif = &sdata->vif; conf.type = sdata->vif.type; conf.mac_addr = dev->dev_addr; - res = local->ops->add_interface(local_to_hw(local), &conf); + res = drv_add_interface(local, &conf); if (res) goto err_stop; @@ -328,10 +327,10 @@ static int ieee80211_open(struct net_device *dev) return 0; err_del_interface: - local->ops->remove_interface(local_to_hw(local), &conf); + drv_remove_interface(local, &conf); err_stop: - if (!local->open_count && local->ops->stop) - local->ops->stop(local_to_hw(local)); + if (!local->open_count) + drv_stop(local); err_del_bss: sdata->bss = NULL; if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) @@ -544,7 +543,7 @@ static int ieee80211_stop(struct net_device *dev) conf.mac_addr = dev->dev_addr; /* disable all keys for as long as this netdev is down */ ieee80211_disable_keys(sdata); - local->ops->remove_interface(local_to_hw(local), &conf); + drv_remove_interface(local, &conf); } sdata->bss = NULL; @@ -553,8 +552,7 @@ static int ieee80211_stop(struct net_device *dev) if (netif_running(local->mdev)) dev_close(local->mdev); - if (local->ops->stop) - local->ops->stop(local_to_hw(local)); + drv_stop(local); ieee80211_led_radio(local, 0); diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 687acf23054d..b7e1350273bb 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -16,6 +16,7 @@ #include #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "debugfs_key.h" #include "aes_ccm.h" #include "aes_cmac.h" @@ -136,8 +137,7 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key) struct ieee80211_sub_if_data, u.ap); - ret = key->local->ops->set_key(local_to_hw(key->local), SET_KEY, - &sdata->vif, sta, &key->conf); + ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf); if (!ret) { spin_lock(&todo_lock); @@ -179,8 +179,8 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key) struct ieee80211_sub_if_data, u.ap); - ret = key->local->ops->set_key(local_to_hw(key->local), DISABLE_KEY, - &sdata->vif, sta, &key->conf); + ret = drv_set_key(key->local, DISABLE_KEY, &sdata->vif, + sta, &key->conf); if (ret) printk(KERN_ERR "mac80211-%s: failed to remove key " diff --git a/net/mac80211/main.c b/net/mac80211/main.c index c817c9ef215a..b80bc80e46cf 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -26,6 +26,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "rate.h" #include "mesh.h" #include "wep.h" @@ -81,10 +82,9 @@ void ieee80211_configure_filter(struct ieee80211_local *local) /* be a bit nasty */ new_flags |= (1<<31); - local->ops->configure_filter(local_to_hw(local), - changed_flags, &new_flags, - local->mdev->mc_count, - local->mdev->mc_list); + drv_configure_filter(local, changed_flags, &new_flags, + local->mdev->mc_count, + local->mdev->mc_list); WARN_ON(new_flags & (1<<31)); @@ -192,7 +192,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) } if (changed && local->open_count) { - ret = local->ops->config(local_to_hw(local), changed); + ret = drv_config(local, changed); /* * Goal: * HW reconfiguration should never fail, the driver has told @@ -276,11 +276,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, } } - if (local->ops->bss_info_changed) - local->ops->bss_info_changed(local_to_hw(local), - &sdata->vif, - &sdata->vif.bss_conf, - changed); + drv_bss_info_changed(local, &sdata->vif, + &sdata->vif.bss_conf, changed); /* * DEPRECATED diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c7971196d9d5..42f33fd3c5ec 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -23,6 +23,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "rate.h" #include "led.h" @@ -683,11 +684,10 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local, local->mdev->name, queue, aci, acm, params.aifs, params.cw_min, params.cw_max, params.txop); #endif - if (local->ops->conf_tx && - local->ops->conf_tx(local_to_hw(local), queue, ¶ms)) { + if (drv_conf_tx(local, queue, ¶ms) && local->ops->conf_tx) printk(KERN_DEBUG "%s: failed to set TX queue " - "parameters for queue %d\n", local->mdev->name, queue); - } + "parameters for queue %d\n", local->mdev->name, + queue); } } @@ -1982,10 +1982,8 @@ static void ieee80211_sta_reset_auth(struct ieee80211_sub_if_data *sdata) struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; - if (local->ops->reset_tsf) { - /* Reset own TSF to allow time synchronization work. */ - local->ops->reset_tsf(local_to_hw(local)); - } + /* Reset own TSF to allow time synchronization work. */ + drv_reset_tsf(local); ifmgd->wmm_last_param_set = -1; /* allow any WMM update */ diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index b38986c9deef..9d3d89abbb57 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -2,6 +2,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "led.h" int __ieee80211_suspend(struct ieee80211_hw *hw) @@ -43,8 +44,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw) struct ieee80211_sub_if_data, u.ap); - local->ops->sta_notify(hw, &sdata->vif, - STA_NOTIFY_REMOVE, &sta->sta); + drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE, + &sta->sta); } spin_unlock_irqrestore(&local->sta_lock, flags); } @@ -57,7 +58,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw) conf.vif = &sdata->vif; conf.type = sdata->vif.type; conf.mac_addr = sdata->dev->dev_addr; - local->ops->remove_interface(hw, &conf); + drv_remove_interface(local, &conf); } } @@ -67,7 +68,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw) /* stop hardware */ if (local->open_count) { ieee80211_led_radio(local, false); - local->ops->stop(hw); + drv_stop(local); } return 0; } diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index a5afb79dab6e..6a9d89b392e3 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -19,6 +19,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "led.h" #include "mesh.h" #include "wep.h" @@ -773,9 +774,7 @@ static void ap_sta_ps_start(struct sta_info *sta) atomic_inc(&sdata->bss->num_sta_ps); set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL); - if (local->ops->sta_notify) - local->ops->sta_notify(local_to_hw(local), &sdata->vif, - STA_NOTIFY_SLEEP, &sta->sta); + drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta); #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n", sdata->dev->name, sta->sta.addr, sta->sta.aid); @@ -792,9 +791,7 @@ static int ap_sta_ps_end(struct sta_info *sta) atomic_dec(&sdata->bss->num_sta_ps); clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL); - if (local->ops->sta_notify) - local->ops->sta_notify(local_to_hw(local), &sdata->vif, - STA_NOTIFY_AWAKE, &sta->sta); + drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta); if (!skb_queue_empty(&sta->ps_tx_buf)) sta_info_clear_tim_bit(sta); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 04e270abdd22..127bd54e0e38 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -21,6 +21,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "mesh.h" #define IEEE80211_PROBE_DELAY (HZ / 33) @@ -316,17 +317,15 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) netif_tx_lock_bh(local->mdev); netif_addr_lock(local->mdev); local->filter_flags &= ~FIF_BCN_PRBRESP_PROMISC; - local->ops->configure_filter(local_to_hw(local), - FIF_BCN_PRBRESP_PROMISC, - &local->filter_flags, - local->mdev->mc_count, - local->mdev->mc_list); + drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC, + &local->filter_flags, + local->mdev->mc_count, + local->mdev->mc_list); netif_addr_unlock(local->mdev); netif_tx_unlock_bh(local->mdev); - if (local->ops->sw_scan_complete) - local->ops->sw_scan_complete(local_to_hw(local)); + drv_sw_scan_complete(local); mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { @@ -375,8 +374,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) * nullfunc frames and probe requests will be dropped in * ieee80211_tx_h_check_assoc(). */ - if (local->ops->sw_scan_start) - local->ops->sw_scan_start(local_to_hw(local)); + drv_sw_scan_start(local); mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { @@ -405,11 +403,10 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) netif_addr_lock_bh(local->mdev); local->filter_flags |= FIF_BCN_PRBRESP_PROMISC; - local->ops->configure_filter(local_to_hw(local), - FIF_BCN_PRBRESP_PROMISC, - &local->filter_flags, - local->mdev->mc_count, - local->mdev->mc_list); + drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC, + &local->filter_flags, + local->mdev->mc_count, + local->mdev->mc_list); netif_addr_unlock_bh(local->mdev); /* TODO: start scan as soon as all nullfunc frames are ACKed */ @@ -477,8 +474,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, mutex_unlock(&local->scan_mtx); if (local->ops->hw_scan) - rc = local->ops->hw_scan(local_to_hw(local), - local->scan_req); + rc = drv_hw_scan(local, local->scan_req); else rc = ieee80211_start_sw_scan(local); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 7116220d06be..a98ea273a155 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -19,6 +19,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "rate.h" #include "sta_info.h" #include "debugfs_sta.h" @@ -346,8 +347,7 @@ int sta_info_insert(struct sta_info *sta) struct ieee80211_sub_if_data, u.ap); - local->ops->sta_notify(local_to_hw(local), &sdata->vif, - STA_NOTIFY_ADD, &sta->sta); + drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta); } #ifdef CONFIG_MAC80211_VERBOSE_DEBUG @@ -405,8 +405,7 @@ static void __sta_info_set_tim_bit(struct ieee80211_if_ap *bss, if (sta->local->ops->set_tim) { sta->local->tim_in_locked_section = true; - sta->local->ops->set_tim(local_to_hw(sta->local), - &sta->sta, true); + drv_set_tim(sta->local, &sta->sta, true); sta->local->tim_in_locked_section = false; } } @@ -431,8 +430,7 @@ static void __sta_info_clear_tim_bit(struct ieee80211_if_ap *bss, if (sta->local->ops->set_tim) { sta->local->tim_in_locked_section = true; - sta->local->ops->set_tim(local_to_hw(sta->local), - &sta->sta, false); + drv_set_tim(sta->local, &sta->sta, false); sta->local->tim_in_locked_section = false; } } @@ -482,8 +480,8 @@ static void __sta_info_unlink(struct sta_info **sta) struct ieee80211_sub_if_data, u.ap); - local->ops->sta_notify(local_to_hw(local), &sdata->vif, - STA_NOTIFY_REMOVE, &(*sta)->sta); + drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE, + &(*sta)->sta); } if (ieee80211_vif_is_mesh(&sdata->vif)) { diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c index 38fa111d2dc6..964b7faa7f17 100644 --- a/net/mac80211/tkip.c +++ b/net/mac80211/tkip.c @@ -13,6 +13,7 @@ #include #include +#include "driver-ops.h" #include "key.h" #include "tkip.h" #include "wep.h" @@ -307,9 +308,8 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm, if (is_multicast_ether_addr(ra)) sta_addr = bcast; - key->local->ops->update_tkip_key( - local_to_hw(key->local), &key->conf, - sta_addr, iv32, key->u.tkip.rx[queue].p1k); + drv_update_tkip_key(key->local, &key->conf, sta_addr, + iv32, key->u.tkip.rx[queue].p1k); } } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 29df65045fc9..1564a3018cf5 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -25,6 +25,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "led.h" #include "mesh.h" #include "wep.h" @@ -1162,7 +1163,7 @@ static int __ieee80211_tx(struct ieee80211_local *local, next = skb->next; len = skb->len; - ret = local->ops->tx(local_to_hw(local), skb); + ret = drv_tx(local, skb); if (WARN_ON(ret != NETDEV_TX_OK && skb->len != len)) { dev_kfree_skb(skb); ret = NETDEV_TX_OK; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 2cde9bbfe7d9..97b613affe08 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -26,6 +26,7 @@ #include #include "ieee80211_i.h" +#include "driver-ops.h" #include "rate.h" #include "mesh.h" #include "wme.h" @@ -726,7 +727,7 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata) qparam.txop = 0; for (i = 0; i < local_to_hw(local)->queues; i++) - local->ops->conf_tx(local_to_hw(local), i, &qparam); + drv_conf_tx(local, i, &qparam); } void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata, @@ -1000,7 +1001,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* restart hardware */ if (local->open_count) { - res = local->ops->start(hw); + res = drv_start(local); ieee80211_led_radio(local, hw->conf.radio_enabled); } @@ -1013,7 +1014,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) conf.vif = &sdata->vif; conf.type = sdata->vif.type; conf.mac_addr = sdata->dev->dev_addr; - res = local->ops->add_interface(hw, &conf); + res = drv_add_interface(local, &conf); } } @@ -1026,8 +1027,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct ieee80211_sub_if_data, u.ap); - local->ops->sta_notify(hw, &sdata->vif, - STA_NOTIFY_ADD, &sta->sta); + drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, + &sta->sta); } spin_unlock_irqrestore(&local->sta_lock, flags); } @@ -1045,8 +1046,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) rcu_read_unlock(); /* setup RTS threshold */ - if (local->ops->set_rts_threshold) - local->ops->set_rts_threshold(hw, hw->wiphy->rts_threshold); + drv_set_rts_threshold(local, hw->wiphy->rts_threshold); /* reconfigure hardware */ ieee80211_hw_config(local, ~0); From e61f234079b49c7e075b12551797fc4954704019 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Fri, 24 Apr 2009 00:00:00 +0300 Subject: [PATCH 09/68] nl80211: Send timeout event on failed direct probe If the direct probe times out, we need to send the authentication timeout event to notify SME in the same way as we notify on timeout with authentication frames since the direct probe is run as part of the authentication attempt. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 42f33fd3c5ec..30a0034b9124 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -890,7 +890,7 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata) printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n", sdata->dev->name, ifmgd->bssid); ifmgd->state = IEEE80211_STA_MLME_DISABLED; - ieee80211_sta_send_apinfo(sdata); + cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid); /* * Most likely AP is not in the range so remove the From d91f190c412aff940a46cabaccf114361c133605 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Apr 2009 15:13:54 +0200 Subject: [PATCH 10/68] mac80211_hwsim: fix bogus warning A typo slipped into my patch to configure beacon intervals properly -- this warning is supposed to trigger when the beacon interval is zero, not non-zero. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index e67b424f925e..8fa6e6ce5705 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -618,7 +618,7 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, printk(KERN_DEBUG " %s: BCNINT: %d\n", wiphy_name(hw->wiphy), info->beacon_int); data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000; - if (WARN_ON(data->beacon_int)) + if (WARN_ON(!data->beacon_int)) data->beacon_int = 1; } From 16cf438a1eca2b7206bd7ac7763637c2a87c00c6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Apr 2009 15:15:25 +0200 Subject: [PATCH 11/68] mac80211: fix probe response processing Due to the use of a _REQ_DIRECT_PROBE bit, which is unnecessary (and I wonder why it was done that way), an interesting situation can arise: 1) we try to probe an access point 2) the AP doesn't response in time 3) we tell userspace that we gave up 4) the AP suddenly responds 5) we auth/assoc with the AP I've seen 4) happen in testing with hostapd SIGSTOPped, and when SIGCONTinued it processes the probe requests that came in and send responses. But 5) is not supposed to happen after we tell everybody we've given up on the AP. To fix this, remove the _REQ_DIRECT_PROBE request bit, and process probe responses when we're in the relevant MLME state, namely IEEE80211_STA_MLME_DIRECT_PROBE. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 5 ++--- net/mac80211/mlme.c | 5 +---- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d8de1e159ee0..236ea098bb6c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -248,9 +248,8 @@ struct mesh_preq_queue { #define IEEE80211_STA_EXT_SME BIT(17) /* flags for MLME request */ #define IEEE80211_STA_REQ_SCAN 0 -#define IEEE80211_STA_REQ_DIRECT_PROBE 1 -#define IEEE80211_STA_REQ_AUTH 2 -#define IEEE80211_STA_REQ_RUN 3 +#define IEEE80211_STA_REQ_AUTH 1 +#define IEEE80211_STA_REQ_RUN 2 /* bitfield of allowed auth algs */ #define IEEE80211_AUTH_ALG_OPEN BIT(0) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 30a0034b9124..2ded4766d014 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -915,8 +915,6 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata) ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE; - set_bit(IEEE80211_STA_REQ_DIRECT_PROBE, &ifmgd->request); - /* Direct probe is sent to broadcast address as some APs * will not answer to direct packet in unassociated state. */ @@ -1738,8 +1736,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false); /* direct probe may be part of the association flow */ - if (test_and_clear_bit(IEEE80211_STA_REQ_DIRECT_PROBE, - &ifmgd->request)) { + if (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE) { printk(KERN_DEBUG "%s direct probe responded\n", sdata->dev->name); ieee80211_authenticate(sdata); From 083c4687bc3abc315c73830b9c74ad67e005d8c2 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 24 Apr 2009 21:35:57 +0200 Subject: [PATCH 12/68] ar9170: handle otus' A-MPDU density definitions Otus uses slightly different set of "Minimum MPDU Start Spacing" values than the 802.11n D2.0 specifies. (the whole table is shifted by one and therefore the 16us spacing is not officially available!) And while we're at it, we also initialize our MAC's density register. So, this annoying _feature_ will not break TX A-MPDU later. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/hw.h | 2 ++ drivers/net/wireless/ath/ar9170/mac.c | 23 +++++++++++++++++++++++ drivers/net/wireless/ath/ar9170/main.c | 4 ++-- 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h index 95bf812d6fcc..3293e0fb24fb 100644 --- a/drivers/net/wireless/ath/ar9170/hw.h +++ b/drivers/net/wireless/ath/ar9170/hw.h @@ -207,6 +207,8 @@ enum ar9170_cmd { #define AR9170_MAC_REG_AC1_AC0_TXOP (AR9170_MAC_REG_BASE + 0xB44) #define AR9170_MAC_REG_AC3_AC2_TXOP (AR9170_MAC_REG_BASE + 0xB48) +#define AR9170_MAC_REG_AMPDU_SET (AR9170_MAC_REG_BASE + 0xba0) + #define AR9170_MAC_REG_ACK_TABLE (AR9170_MAC_REG_BASE + 0xC00) #define AR9170_MAC_REG_AMPDU_RX_THRESH (AR9170_MAC_REG_BASE + 0xC50) diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c index 0e5967dd119c..45986b6eadbc 100644 --- a/drivers/net/wireless/ath/ar9170/mac.c +++ b/drivers/net/wireless/ath/ar9170/mac.c @@ -72,6 +72,24 @@ int ar9170_set_qos(struct ar9170 *ar) return ar9170_regwrite_result(); } +static int ar9170_set_ampdu_density(struct ar9170 *ar, u8 mpdudensity) +{ + u32 val; + + /* don't allow AMPDU density > 8us */ + if (mpdudensity > 6) + return -EINVAL; + + /* Watch out! Otus uses slightly different density values. */ + val = 0x140a00 | (mpdudensity ? (mpdudensity + 1) : 0); + + ar9170_regwrite_begin(ar); + ar9170_regwrite(AR9170_MAC_REG_AMPDU_SET, val); + ar9170_regwrite_finish(); + + return ar9170_regwrite_result(); +} + int ar9170_init_mac(struct ar9170 *ar) { ar9170_regwrite_begin(ar); @@ -296,6 +314,11 @@ int ar9170_set_operating_mode(struct ar9170 *ar) if (err) return err; + /* set AMPDU density to 8us. */ + err = ar9170_set_ampdu_density(ar, 6); + if (err) + return err; + ar9170_regwrite_begin(ar); ar9170_regwrite(AR9170_MAC_REG_POWERMANAGEMENT, pm_mode); diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 3bd3a61225ce..4ef1d2fc859c 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -151,8 +151,8 @@ static struct ieee80211_channel ar9170_5ghz_chantable[] = { IEEE80211_HT_CAP_SGI_40 | \ IEEE80211_HT_CAP_DSSSCCK40 | \ IEEE80211_HT_CAP_SM_PS, \ - .ampdu_factor = 3, /* ?? */ \ - .ampdu_density = 7, /* ?? */ \ + .ampdu_factor = 3, \ + .ampdu_density = 6, \ .mcs = { \ .rx_mask = { 0xFF, 0xFF, 0, 0, 0, 0, 0, 0, 0, 0, }, \ }, \ From 2cfb1f5e20f260e6ff306ba181efee956ba48f54 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 24 Apr 2009 21:41:18 +0200 Subject: [PATCH 13/68] ar9170: uncomment powermgt case handle This patch uncomment a few lines that survived the RFCs. However, there is not much to worry about, since AP mode is not officially advertised and supported. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/mac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c index 45986b6eadbc..43aeb69685d3 100644 --- a/drivers/net/wireless/ath/ar9170/mac.c +++ b/drivers/net/wireless/ath/ar9170/mac.c @@ -283,9 +283,9 @@ int ar9170_set_operating_mode(struct ar9170 *ar) case NL80211_IFTYPE_ADHOC: pm_mode |= AR9170_MAC_REG_POWERMGT_IBSS; break; -/* case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP: pm_mode |= AR9170_MAC_REG_POWERMGT_AP; - break;*/ + break; case NL80211_IFTYPE_WDS: pm_mode |= AR9170_MAC_REG_POWERMGT_AP_WDS; break; From 0ef9ccdd9ec7f2cf28d0605c216d853687f5291d Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Fri, 24 Apr 2009 14:09:31 -0700 Subject: [PATCH 14/68] cfg80211: remove superfluous !last_request check in reg_device_remove() Commit 0ad8acaf "cfg80211: fix NULL pointer deference in reg_device_remove()" added a check that last_request is non-NULL, rendering the 2nd check superfluous. While there, rearrange the code a bit so it's a little more straight forward. Signed-off-by: Chris Wright Signed-off-by: John W. Linville --- net/wireless/reg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index f38cc39fa79e..9fea910204db 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2100,14 +2100,14 @@ void reg_device_remove(struct wiphy *wiphy) assert_cfg80211_lock(); + kfree(wiphy->regd); + if (last_request) request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); - kfree(wiphy->regd); - if (!last_request || !request_wiphy) - return; - if (request_wiphy != wiphy) + if (!request_wiphy || request_wiphy != wiphy) return; + last_request->wiphy_idx = WIPHY_IDX_STALE; last_request->country_ie_env = ENVIRON_ANY; } From aeca78b9b094d00cccca39e9a1055c74ad83ea69 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 Apr 2009 15:26:02 -0700 Subject: [PATCH 15/68] net/rfkill/rfkill.c: fix build with CONFIG_RFKILL_LEDS=n net/rfkill/rfkill.c: In function 'update_rfkill_state': net/rfkill/rfkill.c:99: error: implicit declaration of function 'rfkill_led_trigger' Caused by : commit 492301fb5d12e4a77a1010ad2b6f1ed306014123 : Author: Larry Finger : Date: Thu Apr 9 22:14:19 2009 -0500 : : rfkill: Fix broken rfkill LED in 2.6.30-rc1 Cc: Henrique de Moraes Holschuh Cc: Ivo van Doorn Cc: Michael Buesch Cc: David S. Miller Cc: Larry Finger Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index e2d4510623f2..4f5a83183c95 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -75,6 +75,11 @@ static void rfkill_led_trigger_activate(struct led_classdev *led) rfkill_led_trigger(rfkill, rfkill->state); } +#else +static inline void rfkill_led_trigger(struct rfkill *rfkill, + enum rfkill_state state) +{ +} #endif /* CONFIG_RFKILL_LEDS */ static void rfkill_uevent(struct rfkill *rfkill) From ded7a7eaab2a39b7b5c36a2ec3be46f6ebcedba5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 25 Apr 2009 14:09:23 +0200 Subject: [PATCH 16/68] ath5k: 5211, don't crypt every protected frame Set null key type even on ar5211, otherwise it en/decrypts every frame with protected bit set which renders the card unusable on encrypted networks. Signed-off-by: Jiri Slaby Cc: Luis R. Rodriguez Cc: Bob Copeland Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/pcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 55122f1e1986..5f07e876d4bd 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -1003,7 +1003,7 @@ int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) * Note2: Windows driver (ndiswrapper) sets this to * 0x00000714 instead of 0x00000007 */ - if (ah->ah_version > AR5K_AR5211) { + if (ah->ah_version >= AR5K_AR5211) { ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, AR5K_KEYTABLE_TYPE(entry)); From a406ac0dc15b22807b65f5a6590b9cb34d99d4ab Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 25 Apr 2009 21:11:55 +0200 Subject: [PATCH 17/68] p54usb: remove some dead code Since "p54: prevent upload of wrong firmwares" we no longer allow outdated LM86 firmwares to be uploaded on ISL3887 (LM87) devices. Therefore we can purge this buggy legacy code altogether. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 56 ++----------------------------- 1 file changed, 3 insertions(+), 53 deletions(-) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 6cc6cbc9234f..44ab3ccac910 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -206,53 +206,6 @@ static int p54u_init_urbs(struct ieee80211_hw *dev) return ret; } -static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) -{ - struct p54u_priv *priv = dev->priv; - struct urb *addr_urb, *data_urb; - int err = 0; - - addr_urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!addr_urb) - return; - - data_urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!data_urb) { - usb_free_urb(addr_urb); - return; - } - - usb_fill_bulk_urb(addr_urb, priv->udev, - usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - &((struct p54_hdr *)skb->data)->req_id, 4, - p54u_tx_dummy_cb, dev); - usb_fill_bulk_urb(data_urb, priv->udev, - usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, FREE_AFTER_TX(skb) ? - p54u_tx_cb : p54u_tx_dummy_cb, skb); - addr_urb->transfer_flags |= URB_ZERO_PACKET; - data_urb->transfer_flags |= URB_ZERO_PACKET; - - usb_anchor_urb(addr_urb, &priv->submitted); - err = usb_submit_urb(addr_urb, GFP_ATOMIC); - if (err) { - usb_unanchor_urb(addr_urb); - goto out; - } - - usb_anchor_urb(data_urb, &priv->submitted); - err = usb_submit_urb(data_urb, GFP_ATOMIC); - if (err) - usb_unanchor_urb(data_urb); - - out: - usb_free_urb(addr_urb); - usb_free_urb(data_urb); - - if (err) - p54_free_skb(dev, skb); -} - static __le32 p54u_lm87_chksum(const __le32 *data, size_t length) { u32 chk = 0; @@ -954,13 +907,10 @@ static int __devinit p54u_probe(struct usb_interface *intf, priv->common.stop = p54u_stop; if (recognized_pipes < P54U_PIPE_NUMBER) { priv->hw_type = P54U_3887; + dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); + priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); + priv->common.tx = p54u_tx_lm87; err = p54u_upload_firmware_3887(dev); - if (priv->common.fw_interface == FW_LM87) { - dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); - priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); - priv->common.tx = p54u_tx_lm87; - } else - priv->common.tx = p54u_tx_3887; } else { priv->hw_type = P54U_NET2280; dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); From 1ca5f2e94c40b04d5dec437cd41fd5ba12aaac31 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 25 Apr 2009 21:12:09 +0200 Subject: [PATCH 18/68] p54usb: rework driver for resume This patch redo the driver code so that p54usb no longer hangs the kernel on resume. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 256 +++++++++++++++++++----------- drivers/net/wireless/p54/p54usb.h | 16 +- 2 files changed, 177 insertions(+), 95 deletions(-) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 44ab3ccac910..ec6c95474f1a 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -81,6 +81,29 @@ static struct usb_device_id p54u_table[] __devinitdata = { MODULE_DEVICE_TABLE(usb, p54u_table); +static const struct { + u32 intf; + enum p54u_hw_type type; + char fw[FIRMWARE_NAME_MAX]; + char fw_legacy[FIRMWARE_NAME_MAX]; + char hw[20]; +} p54u_fwlist[__NUM_P54U_HWTYPES] = { + { + .type = P54U_NET2280, + .intf = FW_LM86, + .fw = "isl3886usb", + .fw_legacy = "isl3890usb", + .hw = "ISL3886 + net2280", + }, + { + .type = P54U_3887, + .intf = FW_LM87, + .fw = "isl3887usb", + .fw_legacy = "isl3887usb_bare", + .hw = "ISL3887", + }, +}; + static void p54u_rx_cb(struct urb *urb) { struct sk_buff *skb = (struct sk_buff *) urb->context; @@ -125,11 +148,7 @@ static void p54u_rx_cb(struct urb *urb) } skb_reset_tail_pointer(skb); skb_trim(skb, 0); - if (urb->transfer_buffer != skb_tail_pointer(skb)) { - /* this should not happen */ - WARN_ON(1); - urb->transfer_buffer = skb_tail_pointer(skb); - } + urb->transfer_buffer = skb_tail_pointer(skb); } skb_queue_tail(&priv->rx_queue, skb); usb_anchor_urb(urb, &priv->submitted); @@ -378,20 +397,16 @@ static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, data, len, &alen, 2000); } -static const char p54u_romboot_3887[] = "~~~~"; -static const char p54u_firmware_upload_3887[] = "<\r"; - -static int p54u_device_reset_3887(struct ieee80211_hw *dev) +static int p54u_device_reset(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; int ret, lock = (priv->intf->condition != USB_INTERFACE_BINDING); - u8 buf[4]; if (lock) { ret = usb_lock_device_for_reset(priv->udev, priv->intf); if (ret < 0) { dev_err(&priv->udev->dev, "(p54usb) unable to lock " - " device for reset: %d\n", ret); + "device for reset (%d)!\n", ret); return ret; } } @@ -400,26 +415,34 @@ static int p54u_device_reset_3887(struct ieee80211_hw *dev) if (lock) usb_unlock_device(priv->udev); - if (ret) { + if (ret) dev_err(&priv->udev->dev, "(p54usb) unable to reset " - "device: %d\n", ret); - return ret; - } + "device (%d)!\n", ret); + + return ret; +} + +static const char p54u_romboot_3887[] = "~~~~"; +static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + u8 buf[4]; + int ret; memcpy(&buf, p54u_romboot_3887, sizeof(buf)); ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(buf)); if (ret) dev_err(&priv->udev->dev, "(p54usb) unable to jump to " - "boot ROM: %d\n", ret); + "boot ROM (%d)!\n", ret); return ret; } +static const char p54u_firmware_upload_3887[] = "<\r"; static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; - const struct firmware *fw_entry = NULL; int err, alen; u8 carry = 0; u8 *buf, *tmp; @@ -428,51 +451,29 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) struct x2_header *hdr; unsigned long timeout; + err = p54u_firmware_reset_3887(dev); + if (err) + return err; + tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); if (!buf) { dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware" "upload buffer!\n"); - err = -ENOMEM; - goto err_bufalloc; + return -ENOMEM; } - err = p54u_device_reset_3887(dev); - if (err) - goto err_reset; - - err = request_firmware(&fw_entry, "isl3887usb", &priv->udev->dev); - if (err) { - dev_err(&priv->udev->dev, "p54usb: cannot find firmware " - "(isl3887usb)\n"); - err = request_firmware(&fw_entry, "isl3887usb_bare", - &priv->udev->dev); - if (err) - goto err_req_fw_failed; - } - - err = p54_parse_firmware(dev, fw_entry); - if (err) - goto err_upload_failed; - - if (priv->common.fw_interface != FW_LM87) { - dev_err(&priv->udev->dev, "wrong firmware, " - "please get a LM87 firmware and try again.\n"); - err = -EINVAL; - goto err_upload_failed; - } - - left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size); + left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size); strcpy(buf, p54u_firmware_upload_3887); left -= strlen(p54u_firmware_upload_3887); tmp += strlen(p54u_firmware_upload_3887); - data = fw_entry->data; - remains = fw_entry->size; + data = priv->fw->data; + remains = priv->fw->size; hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887)); memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE); hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR); - hdr->fw_length = cpu_to_le32(fw_entry->size); + hdr->fw_length = cpu_to_le32(priv->fw->size); hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr, sizeof(u32)*2)); left -= sizeof(*hdr); @@ -514,7 +515,8 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) left = block_size = min((unsigned int)P54U_FW_BLOCK, remains); } - *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size)); + *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, priv->fw->data, + priv->fw->size)); err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); if (err) { dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n"); @@ -565,19 +567,14 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) if (err) goto err_upload_failed; - err_upload_failed: - release_firmware(fw_entry); - err_req_fw_failed: - err_reset: +err_upload_failed: kfree(buf); - err_bufalloc: return err; } static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; - const struct firmware *fw_entry = NULL; const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE; int err, alen; void *buf; @@ -592,33 +589,6 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) return -ENOMEM; } - err = request_firmware(&fw_entry, "isl3886usb", &priv->udev->dev); - if (err) { - dev_err(&priv->udev->dev, "(p54usb) cannot find firmware " - "(isl3886usb)\n"); - err = request_firmware(&fw_entry, "isl3890usb", - &priv->udev->dev); - if (err) { - kfree(buf); - return err; - } - } - - err = p54_parse_firmware(dev, fw_entry); - if (err) { - kfree(buf); - release_firmware(fw_entry); - return err; - } - - if (priv->common.fw_interface != FW_LM86) { - dev_err(&priv->udev->dev, "wrong firmware, " - "please get a LM86(USB) firmware and try again.\n"); - kfree(buf); - release_firmware(fw_entry); - return -EINVAL; - } - #define P54U_WRITE(type, addr, data) \ do {\ err = p54u_write(priv, buf, type,\ @@ -718,8 +688,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); /* finally, we can upload firmware now! */ - remains = fw_entry->size; - data = fw_entry->data; + remains = priv->fw->size; + data = priv->fw->data; offset = ISL38XX_DEV_FIRMWARE_ADDR; while (remains) { @@ -828,12 +798,54 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) #undef P54U_WRITE #undef P54U_READ - fail: - release_firmware(fw_entry); +fail: kfree(buf); return err; } +static int p54u_load_firmware(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + int err, i; + + BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES); + + for (i = 0; i < __NUM_P54U_HWTYPES; i++) + if (p54u_fwlist[i].type == priv->hw_type) + break; + + if (i == __NUM_P54U_HWTYPES) + return -EOPNOTSUPP; + + err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev); + if (err) { + dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " + "(%d)!\n", p54u_fwlist[i].fw, err); + + err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy, + &priv->udev->dev); + if (err) + return err; + } + + err = p54_parse_firmware(dev, priv->fw); + if (err) + goto out; + + if (priv->common.fw_interface != p54u_fwlist[i].intf) { + dev_err(&priv->udev->dev, "wrong firmware, please get " + "a firmware for \"%s\" and try again.\n", + p54u_fwlist[i].hw); + err = -EINVAL; + } + +out: + if (err) + release_firmware(priv->fw); + + return err; +} + static int p54u_open(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; @@ -875,6 +887,7 @@ static int __devinit p54u_probe(struct usb_interface *intf, } priv = dev->priv; + priv->hw_type = P54U_INVALID_HW; SET_IEEE80211_DEV(dev, &intf->dev); usb_set_intfdata(intf, dev); @@ -906,34 +919,46 @@ static int __devinit p54u_probe(struct usb_interface *intf, priv->common.open = p54u_open; priv->common.stop = p54u_stop; if (recognized_pipes < P54U_PIPE_NUMBER) { + /* ISL3887 needs a full reset on resume */ + udev->reset_resume = 1; + err = p54u_device_reset(dev); + priv->hw_type = P54U_3887; dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); priv->common.tx = p54u_tx_lm87; - err = p54u_upload_firmware_3887(dev); + priv->upload_fw = p54u_upload_firmware_3887; } else { priv->hw_type = P54U_NET2280; dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); priv->common.tx = p54u_tx_net2280; - err = p54u_upload_firmware_net2280(dev); + priv->upload_fw = p54u_upload_firmware_net2280; } + err = p54u_load_firmware(dev); if (err) goto err_free_dev; + err = priv->upload_fw(dev); + if (err) + goto err_free_fw; + p54u_open(dev); err = p54_read_eeprom(dev); p54u_stop(dev); if (err) - goto err_free_dev; + goto err_free_fw; err = p54_register_common(dev, &udev->dev); if (err) - goto err_free_dev; + goto err_free_fw; return 0; - err_free_dev: +err_free_fw: + release_firmware(priv->fw); + +err_free_dev: ieee80211_free_hw(dev); usb_set_intfdata(intf, NULL); usb_put_dev(udev); @@ -952,20 +977,64 @@ static void __devexit p54u_disconnect(struct usb_interface *intf) priv = dev->priv; usb_put_dev(interface_to_usbdev(intf)); + release_firmware(priv->fw); p54_free_common(dev); ieee80211_free_hw(dev); } static int p54u_pre_reset(struct usb_interface *intf) { + struct ieee80211_hw *dev = usb_get_intfdata(intf); + + if (!dev) + return -ENODEV; + + p54u_stop(dev); return 0; } +static int p54u_resume(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct p54u_priv *priv; + + if (!dev) + return -ENODEV; + + priv = dev->priv; + if (unlikely(!(priv->upload_fw && priv->fw))) + return 0; + + return priv->upload_fw(dev); +} + static int p54u_post_reset(struct usb_interface *intf) { + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct p54u_priv *priv; + int err; + + err = p54u_resume(intf); + if (err) + return err; + + /* reinitialize old device state */ + priv = dev->priv; + if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) + ieee80211_restart_hw(dev); + return 0; } +#ifdef CONFIG_PM + +static int p54u_suspend(struct usb_interface *intf, pm_message_t message) +{ + return p54u_pre_reset(intf); +} + +#endif /* CONFIG_PM */ + static struct usb_driver p54u_driver = { .name = "p54usb", .id_table = p54u_table, @@ -973,6 +1042,11 @@ static struct usb_driver p54u_driver = { .disconnect = p54u_disconnect, .pre_reset = p54u_pre_reset, .post_reset = p54u_post_reset, +#ifdef CONFIG_PM + .suspend = p54u_suspend, + .resume = p54u_resume, + .reset_resume = p54u_resume, +#endif /* CONFIG_PM */ .soft_unbind = 1, }; diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h index 8bc58982d8dd..e935b79f7f75 100644 --- a/drivers/net/wireless/p54/p54usb.h +++ b/drivers/net/wireless/p54/p54usb.h @@ -123,18 +123,26 @@ struct p54u_rx_info { struct ieee80211_hw *dev; }; +enum p54u_hw_type { + P54U_INVALID_HW, + P54U_NET2280, + P54U_3887, + + /* keep last */ + __NUM_P54U_HWTYPES, +}; + struct p54u_priv { struct p54_common common; struct usb_device *udev; struct usb_interface *intf; - enum { - P54U_NET2280 = 0, - P54U_3887 - } hw_type; + int (*upload_fw)(struct ieee80211_hw *dev); + enum p54u_hw_type hw_type; spinlock_t lock; struct sk_buff_head rx_queue; struct usb_anchor submitted; + const struct firmware *fw; }; #endif /* P54USB_H */ From 90ccda9baccec8223ca5456fbe49adf7264d1543 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 25 Apr 2009 21:32:09 +0200 Subject: [PATCH 19/68] ar9170usb: reset device on resume This patch takes care of an outstanding comment in "[PATCH] ar9170usb: fix hang on resume" commit message. >However, the device does not accept the firmware on resume. >and it will exit with: > >> firmware part 1 upload failed (-71). >> device is in a bad state. please reconnect it! Reported-by: Johannes Berg Signed-off-by: Christian Lamparter Tested-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index fddda477095c..368fc2d42641 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -689,6 +689,7 @@ static int ar9170_usb_probe(struct usb_interface *intf, aru->common.exec_cmd = ar9170_usb_exec_cmd; aru->common.callback_cmd = ar9170_usb_callback_cmd; + udev->reset_resume = 1; err = ar9170_usb_reset(aru); if (err) goto err_freehw; @@ -805,6 +806,7 @@ static struct usb_driver ar9170_driver = { #ifdef CONFIG_PM .suspend = ar9170_suspend, .resume = ar9170_resume, + .reset_resume = ar9170_resume, #endif /* CONFIG_PM */ }; From 273de92c8461776aaac7b32f8d5889a72b38ea10 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sat, 25 Apr 2009 22:28:55 +0200 Subject: [PATCH 20/68] cfg80211: Remove unnecessary ksize() call This removes an unnecessary ksize() call. krealloc() will do this test internally and won't perform any allocation if the space is already sufficient to hold the data. So remove the redundant check. Signed-off-by: Michael Buesch Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 723aeb3d9462..5dd909a4e601 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -384,11 +384,9 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, } else { u8 *ies = found->pub.information_elements; - if (found->ies_allocated) { - if (ksize(ies) < ielen) - ies = krealloc(ies, ielen, - GFP_ATOMIC); - } else + if (found->ies_allocated) + ies = krealloc(ies, ielen, GFP_ATOMIC); + else ies = kmalloc(ielen, GFP_ATOMIC); if (ies) { From 44e1b98f733e48bb781e4229120e1de5e0c9fdbb Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sun, 26 Apr 2009 11:27:33 +0200 Subject: [PATCH 21/68] cfg80211: Use the correct IE buffer pointer If the IE buffer was allocated, the pub.information_elements pointer was also changed to the allocated space. So we must not assume anymore that the pointer points at the "found" tail. So if it was allocated previously, take the codebranch that grows the buffer size (if necessary) and put the data into the allocated buffer. Signed-off-by: Michael Buesch Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 5dd909a4e601..10b4887dfa6b 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -377,7 +377,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, size_t used = dev->wiphy.bss_priv_size + sizeof(*res); size_t ielen = res->pub.len_information_elements; - if (ksize(found) >= used + ielen) { + if (!found->ies_allocated && ksize(found) >= used + ielen) { memcpy(found->pub.information_elements, res->pub.information_elements, ielen); found->pub.len_information_elements = ielen; From ba5101d098d6a8471d1a3147fb610b2ee3dbb397 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 26 Apr 2009 14:40:59 +0200 Subject: [PATCH 22/68] ar9170: wrong test on outlen in ar9170_usb_exec_cmd() ? remove redundant test: outlen is unsigned Signed-off-by: Roel Kluin Acked-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index 368fc2d42641..d7b562dcebd2 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -350,7 +350,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd, goto err_unbuf; } - if (outlen >= 0 && aru->readlen != outlen) { + if (aru->readlen != outlen) { err = -EMSGSIZE; goto err_unbuf; } From bbb33881ae5bfe4197a005dc03b29b7dcc07fa28 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sun, 26 Apr 2009 14:58:40 +0200 Subject: [PATCH 23/68] ath5k: Storage class should be before const qualifier commit 8e218fb24faef0bfe95bc91b3c05261e20439527 reverted the previous patch (commit 925be8a3077351edbf2b59ca689105df214a0792). The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Acked-by: Jiri Slaby Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index c0fb3b09ba45..c85429d2de3f 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -640,9 +640,9 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) static inline void ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) { - const static u16 intercepts3[] = + static const u16 intercepts3[] = { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; - const static u16 intercepts3_2[] = + static const u16 intercepts3_2[] = { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; const u16 *ip; int i; From 9eb4e21e289beba9cfe34f24920eee83c144e62f Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 26 Apr 2009 16:08:30 +0200 Subject: [PATCH 24/68] rt2x00: Move iv_len into tx descriptor data By placing the iv_len into the tx descriptor data and by passing this data to the crypto IV handlers we can save multiple calls to ieee80211_get_hdrlen_from_skb() and some if-statements when copying/removing the IV data from the outgoing frame. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00crypto.c | 19 +++++++++---------- drivers/net/wireless/rt2x00/rt2x00lib.h | 10 ++++++---- drivers/net/wireless/rt2x00/rt2x00queue.c | 8 ++------ drivers/net/wireless/rt2x00/rt2x00queue.h | 2 ++ 4 files changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 0b41845d9543..ae31581372c0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -66,6 +66,7 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, txdesc->key_idx = hw_key->hw_key_idx; txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb); + txdesc->iv_len = hw_key->iv_len; if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags); @@ -103,34 +104,32 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, return overhead; } -void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len) +void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); - if (unlikely(!iv_len)) + if (unlikely(!txdesc->iv_len)) return; /* Copy IV/EIV data */ - memcpy(skbdesc->iv, skb->data + header_length, iv_len); + memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len); } -void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len) +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); - if (unlikely(!iv_len)) + if (unlikely(!txdesc->iv_len)) return; /* Copy IV/EIV data */ - memcpy(skbdesc->iv, skb->data + header_length, iv_len); + memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len); /* Move ieee80211 header */ - memmove(skb->data + iv_len, skb->data, header_length); + memmove(skb->data + txdesc->iv_len, skb->data, txdesc->iv_offset); /* Pull buffer to correct size */ - skb_pull(skb, iv_len); + skb_pull(skb, txdesc->iv_len); /* IV/EIV data has officially be stripped */ skbdesc->flags |= FRAME_DESC_IV_STRIPPED; diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index a631613177d0..af3c47bd43bd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -295,8 +295,10 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc); unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); -void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len); -void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len); +void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, + struct txentry_desc *txdesc); +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, + struct txentry_desc *txdesc); void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, unsigned int header_length, @@ -319,12 +321,12 @@ static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev } static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, - unsigned int iv_len) + struct txentry_desc *txdesc) { } static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, - unsigned int iv_len) + struct txentry_desc *txdesc) { } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index a5664bd8493e..6f78915b364c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -368,7 +368,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; - unsigned int iv_len = 0; u8 rate_idx, rate_flags; if (unlikely(rt2x00queue_full(queue))) @@ -390,9 +389,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) entry->skb = skb; rt2x00queue_create_tx_descriptor(entry, &txdesc); - if (IEEE80211_SKB_CB(skb)->control.hw_key != NULL) - iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len; - /* * All information is retrieved from the skb->cb array, * now we should claim ownership of the driver part of that @@ -415,9 +411,9 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags)) - rt2x00crypto_tx_copy_iv(skb, iv_len); + rt2x00crypto_tx_copy_iv(skb, &txdesc); else - rt2x00crypto_tx_remove_iv(skb, iv_len); + rt2x00crypto_tx_remove_iv(skb, &txdesc); } /* diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 97e2ab08f080..e3bfd73e319b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -280,6 +280,7 @@ enum txentry_desc_flags { * @cipher: Cipher type used for encryption. * @key_idx: Key index used for encryption. * @iv_offset: Position where IV should be inserted by hardware. + * @iv_len: Length of IV data. */ struct txentry_desc { unsigned long flags; @@ -302,6 +303,7 @@ struct txentry_desc { enum cipher cipher; u16 key_idx; u16 iv_offset; + u16 iv_len; }; /** From 9f1661718c7fcf82e25c6aed20b729ee372d9d65 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 26 Apr 2009 16:08:50 +0200 Subject: [PATCH 25/68] rt2x00: Add support for L2 padding during TX/RX Some hardware require L2 padding between header and payload because both must be aligned to a 4-byte boundary. This hardware also is easier during the RX path since we no longer need to move the entire payload but rather only the header to remove the padding (mac80211 only wants the payload to be 4-byte aligned). Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 10 ++++ drivers/net/wireless/rt2x00/rt2x00crypto.c | 68 +++++++++++++--------- drivers/net/wireless/rt2x00/rt2x00dev.c | 33 ++++++----- drivers/net/wireless/rt2x00/rt2x00lib.h | 27 +++++++-- drivers/net/wireless/rt2x00/rt2x00queue.c | 39 +++++++++++++ drivers/net/wireless/rt2x00/rt2x00queue.h | 14 ++++- 6 files changed, 143 insertions(+), 48 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 0be395528261..7c5cbb192a6c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -102,6 +102,15 @@ #define GET_DURATION(__size, __rate) (((__size) * 8 * 10) / (__rate)) #define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate)) +/* + * Determine the alignment requirement, + * to make sure the 802.11 payload is padded to a 4-byte boundrary + * we must determine the address of the payload and calculate the + * amount of bytes needed to move the data. + */ +#define ALIGN_SIZE(__skb, __header) \ + ( ((unsigned long)((__skb)->data + (__header))) & 3 ) + /* * Standard timing and size defines. * These values should follow the ieee80211 specifications. @@ -590,6 +599,7 @@ enum rt2x00_flags { DRIVER_REQUIRE_SCHEDULED, DRIVER_REQUIRE_DMA, DRIVER_REQUIRE_COPY_IV, + DRIVER_REQUIRE_L2PAD, /* * Driver features diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index ae31581372c0..57ab42cfed34 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -65,7 +65,7 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags); txdesc->key_idx = hw_key->hw_key_idx; - txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb); + txdesc->iv_offset = txdesc->header_length; txdesc->iv_len = hw_key->iv_len; if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) @@ -132,17 +132,16 @@ void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc) skb_pull(skb, txdesc->iv_len); /* IV/EIV data has officially be stripped */ - skbdesc->flags |= FRAME_DESC_IV_STRIPPED; + skbdesc->flags |= SKBDESC_IV_STRIPPED; } -void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); const unsigned int iv_len = ((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4); - if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED)) + if (!(skbdesc->flags & SKBDESC_IV_STRIPPED)) return; skb_push(skb, iv_len); @@ -154,14 +153,15 @@ void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) memcpy(skb->data + header_length, skbdesc->iv, iv_len); /* IV/EIV data has returned into the frame */ - skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED; + skbdesc->flags &= ~SKBDESC_IV_STRIPPED; } -void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, unsigned int header_length, struct rxdone_entry_desc *rxdesc) { unsigned int payload_len = rxdesc->size - header_length; + unsigned int align = ALIGN_SIZE(skb, header_length); unsigned int iv_len; unsigned int icv_len; unsigned int transfer = 0; @@ -191,32 +191,48 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, } /* - * Make room for new data, note that we increase both - * headsize and tailsize when required. The tailsize is - * only needed when ICV data needs to be inserted and - * the padding is smaller than the ICV data. - * When alignment requirements is greater than the - * ICV data we must trim the skb to the correct size - * because we need to remove the extra bytes. + * Make room for new data. There are 2 possibilities + * either the alignment is already present between + * the 802.11 header and payload. In that case we + * we have to move the header less then the iv_len + * since we can use the already available l2pad bytes + * for the iv data. + * When the alignment must be added manually we must + * move the header more then iv_len since we must + * make room for the payload move as well. */ - skb_push(skb, iv_len + align); - if (align < icv_len) - skb_put(skb, icv_len - align); - else if (align > icv_len) - skb_trim(skb, rxdesc->size + iv_len + icv_len); + if (l2pad) { + skb_push(skb, iv_len - align); + skb_put(skb, icv_len); - /* Move ieee80211 header */ - memmove(skb->data + transfer, - skb->data + transfer + iv_len + align, - header_length); - transfer += header_length; + /* Move ieee80211 header */ + memmove(skb->data + transfer, + skb->data + transfer + (iv_len - align), + header_length); + transfer += header_length; + } else { + skb_push(skb, iv_len + align); + if (align < icv_len) + skb_put(skb, icv_len - align); + else if (align > icv_len) + skb_trim(skb, rxdesc->size + iv_len + icv_len); + + /* Move ieee80211 header */ + memmove(skb->data + transfer, + skb->data + transfer + iv_len + align, + header_length); + transfer += header_length; + } /* Copy IV/EIV data */ memcpy(skb->data + transfer, rxdesc->iv, iv_len); transfer += iv_len; - /* Move payload */ - if (align) { + /* + * Move payload for alignment purposes. Note that + * this is only needed when no l2 padding is present. + */ + if (!l2pad) { memmove(skb->data + transfer, skb->data + transfer + align, payload_len); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 5752aaae906b..e15086af7278 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -227,6 +227,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb); u8 rate_idx, rate_flags; /* @@ -234,6 +235,12 @@ void rt2x00lib_txdone(struct queue_entry *entry, */ rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + /* + * Remove L2 padding which was added during + */ + if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags)) + rt2x00queue_payload_align(entry->skb, true, header_length); + /* * If the IV/EIV data was stripped from the frame before it was * passed to the hardware, we should now reinsert it again because @@ -241,7 +248,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * frame as it was passed to us. */ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) - rt2x00crypto_tx_insert_iv(entry->skb); + rt2x00crypto_tx_insert_iv(entry->skb, header_length); /* * Send frame to debugfs immediately, after this call is completed @@ -325,7 +332,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, struct ieee80211_supported_band *sband; const struct rt2x00_rate *rate; unsigned int header_length; - unsigned int align; + bool l2pad; unsigned int i; int idx = -1; @@ -348,12 +355,15 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, memset(&rxdesc, 0, sizeof(rxdesc)); rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); + /* Trim buffer to correct size */ + skb_trim(entry->skb, rxdesc.size); + /* * The data behind the ieee80211 header must be * aligned on a 4 byte boundary. */ header_length = ieee80211_get_hdrlen_from_skb(entry->skb); - align = ((unsigned long)(entry->skb->data + header_length)) & 3; + l2pad = !!(rxdesc.dev_flags & RXDONE_L2PAD); /* * Hardware might have stripped the IV/EIV/ICV data, @@ -362,18 +372,11 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, * in which case we should reinsert the data into the frame. */ if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && - (rxdesc.flags & RX_FLAG_IV_STRIPPED)) { - rt2x00crypto_rx_insert_iv(entry->skb, align, - header_length, &rxdesc); - } else if (align) { - skb_push(entry->skb, align); - /* Move entire frame in 1 command */ - memmove(entry->skb->data, entry->skb->data + align, - rxdesc.size); - } - - /* Update data pointers, trim buffer to correct size */ - skb_trim(entry->skb, rxdesc.size); + (rxdesc.flags & RX_FLAG_IV_STRIPPED)) + rt2x00crypto_rx_insert_iv(entry->skb, l2pad, header_length, + &rxdesc); + else + rt2x00queue_payload_align(entry->skb, l2pad, header_length); /* * Update RX statistics. diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index af3c47bd43bd..aa284e48d2c2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -112,6 +112,23 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); */ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); +/** + * rt2x00queue_payload_align - Align 802.11 payload to 4-byte boundary + * @skb: The skb to align + * @l2pad: Should L2 padding be used + * @header_length: Length of 802.11 header + * + * This function prepares the @skb to be send to the device or mac80211. + * If @l2pad is set to true padding will occur between the 802.11 header + * and payload. Otherwise the padding will be done in front of the 802.11 + * header. + * When @l2pad is set the function will check for the &SKBDESC_L2_PADDED + * flag in &skb_frame_desc. If that flag is set, the padding is removed + * and the flag cleared. Otherwise the padding is added and the flag is set. + */ +void rt2x00queue_payload_align(struct sk_buff *skb, + bool l2pad, unsigned int header_length); + /** * rt2x00queue_write_tx_frame - Write TX frame to hardware * @queue: Queue over which the frame should be send @@ -299,8 +316,8 @@ void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, struct txentry_desc *txdesc); void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc); -void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); -void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length); +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, unsigned int header_length, struct rxdone_entry_desc *rxdesc); #else @@ -330,12 +347,12 @@ static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, { } -static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, + unsigned int header_length) { } -static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, - unsigned int align, +static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, unsigned int header_length, struct rxdone_entry_desc *rxdesc) { diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 6f78915b364c..bc1742c1d51c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -148,6 +148,35 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) dev_kfree_skb_any(skb); } +void rt2x00queue_payload_align(struct sk_buff *skb, + bool l2pad, unsigned int header_length) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int frame_length = skb->len; + unsigned int align = ALIGN_SIZE(skb, header_length); + + if (!align) + return; + + if (l2pad) { + if (skbdesc->flags & SKBDESC_L2_PADDED) { + /* Remove L2 padding */ + memmove(skb->data + align, skb->data, header_length); + skb_pull(skb, align); + skbdesc->flags &= ~SKBDESC_L2_PADDED; + } else { + /* Add L2 padding */ + skb_push(skb, align); + memmove(skb->data, skb->data + align, header_length); + skbdesc->flags |= SKBDESC_L2_PADDED; + } + } else { + /* Generic payload alignment to 4-byte boundary */ + skb_push(skb, align); + memmove(skb->data, skb->data + align, frame_length); + } +} + static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry, struct txentry_desc *txdesc) { @@ -258,6 +287,12 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; + /* + * Header and alignment information. + */ + txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb); + txdesc->l2pad = ALIGN_SIZE(entry->skb, txdesc->header_length); + /* * Check whether this frame is to be acked. */ @@ -416,6 +451,10 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) rt2x00crypto_tx_remove_iv(skb, &txdesc); } + if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags)) + rt2x00queue_payload_align(entry->skb, true, + txdesc.header_length); + /* * It could be possible that the queue was corrupted and this * call failed. Since we always return NETDEV_TX_OK to mac80211, diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index e3bfd73e319b..13e0ece176a1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -87,13 +87,16 @@ enum data_queue_qid { * * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX - * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by + * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by * mac80211 but was stripped for processing by the driver. + * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment, + * the padded bytes are located between header and payload. */ enum skb_frame_desc_flags { SKBDESC_DMA_MAPPED_RX = 1 << 0, SKBDESC_DMA_MAPPED_TX = 1 << 1, - FRAME_DESC_IV_STRIPPED = 1 << 2, + SKBDESC_IV_STRIPPED = 1 << 2, + SKBDESC_L2_PADDED = 1 << 3 }; /** @@ -148,6 +151,7 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) * @RXDONE_MY_BSS: Does this frame originate from device's BSS. * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data. * @RXDONE_CRYPTO_ICV: Driver provided ICV data. + * @RXDONE_L2PAD: 802.11 payload has been padded to 4-byte boundary. */ enum rxdone_entry_desc_flags { RXDONE_SIGNAL_PLCP = 1 << 0, @@ -155,6 +159,7 @@ enum rxdone_entry_desc_flags { RXDONE_MY_BSS = 1 << 2, RXDONE_CRYPTO_IV = 1 << 3, RXDONE_CRYPTO_ICV = 1 << 4, + RXDONE_L2PAD = 1 << 5, }; /** @@ -267,6 +272,8 @@ enum txentry_desc_flags { * * @flags: Descriptor flags (See &enum queue_entry_flags). * @queue: Queue identification (See &enum data_queue_qid). + * @header_length: Length of 802.11 header. + * @l2pad: Amount of padding to align 802.11 payload to 4-byte boundrary. * @length_high: PLCP length high word. * @length_low: PLCP length low word. * @signal: PLCP signal. @@ -287,6 +294,9 @@ struct txentry_desc { enum data_queue_qid queue; + u16 header_length; + u16 l2pad; + u16 length_high; u16 length_low; u16 signal; From 35f00cfcc06bb85e0659f9847400518008d78145 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 26 Apr 2009 16:09:32 +0200 Subject: [PATCH 26/68] rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, it still lacks aggregation support, but that can be added in the future. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 3 + drivers/net/wireless/rt2x00/Makefile | 1 + drivers/net/wireless/rt2x00/rt2x00.h | 11 +++ drivers/net/wireless/rt2x00/rt2x00config.c | 5 ++ drivers/net/wireless/rt2x00/rt2x00dev.c | 92 ++++++++++++++++------ drivers/net/wireless/rt2x00/rt2x00ht.c | 69 ++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00lib.h | 24 ++++++ drivers/net/wireless/rt2x00/rt2x00queue.c | 1 + drivers/net/wireless/rt2x00/rt2x00queue.h | 39 ++++++--- 9 files changed, 211 insertions(+), 34 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2x00ht.c diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index bfc5d9cf716e..4338c93d5b63 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -88,6 +88,9 @@ config RT2X00_LIB_USB config RT2X00_LIB tristate +config RT2X00_LIB_HT + boolean + config RT2X00_LIB_FIRMWARE boolean select FW_LOADER diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index f22d808d8c51..776ec2b8c4e7 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -8,6 +8,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o +rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2x00ht.o obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 7c5cbb192a6c..ebe5f276679b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -366,6 +366,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) * for @tx_power_a, @tx_power_bg and @channels. * @channels: Device/chipset specific channel values (See &struct rf_channel). * @channels_info: Additional information for channels (See &struct channel_info). + * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap). */ struct hw_mode_spec { unsigned int supported_bands; @@ -379,6 +380,8 @@ struct hw_mode_spec { unsigned int num_channels; const struct rf_channel *channels; const struct channel_info *channels_info; + + struct ieee80211_sta_ht_cap ht; }; /* @@ -616,6 +619,7 @@ enum rt2x00_flags { CONFIG_EXTERNAL_LNA_BG, CONFIG_DOUBLE_ANTENNA, CONFIG_DISABLE_LINK_TUNING, + CONFIG_CHANNEL_HT40, }; /* @@ -787,6 +791,13 @@ struct rt2x00_dev { */ u8 freq_offset; + /* + * Calibration information (for rt2800usb & rt2800pci). + * [0] -> BW20 + * [1] -> BW40 + */ + u8 calibration[2]; + /* * Low level statistics which will have * to be kept up to date while device is running. diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 9c2f5517af2a..863e399d4fa6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -173,6 +173,11 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, libconf.conf = conf; if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) { + if (conf_is_ht40(conf)) + __set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags); + else + __clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags); + memcpy(&libconf.rf, &rt2x00dev->spec.channels[conf->channel->hw_value], sizeof(libconf.rf)); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index e15086af7278..f2270845072a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -323,19 +323,54 @@ void rt2x00lib_txdone(struct queue_entry *entry, } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); +static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev, + struct rxdone_entry_desc *rxdesc) +{ + struct ieee80211_supported_band *sband; + const struct rt2x00_rate *rate; + unsigned int i; + int signal; + int type; + + /* + * For non-HT rates the MCS value needs to contain the + * actually used rate modulation (CCK or OFDM). + */ + if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS) + signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal); + else + signal = rxdesc->signal; + + type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK); + + sband = &rt2x00dev->bands[rt2x00dev->curr_band]; + for (i = 0; i < sband->n_bitrates; i++) { + rate = rt2x00_get_rate(sband->bitrates[i].hw_value); + + if (((type == RXDONE_SIGNAL_PLCP) && + (rate->plcp == signal)) || + ((type == RXDONE_SIGNAL_BITRATE) && + (rate->bitrate == signal)) || + ((type == RXDONE_SIGNAL_MCS) && + (rate->mcs == signal))) { + return i; + } + } + + WARNING(rt2x00dev, "Frame received with unrecognized signal, " + "signal=0x%.4x, type=%d.\n", signal, type); + return 0; +} + void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { struct rxdone_entry_desc rxdesc; struct sk_buff *skb; struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; - struct ieee80211_supported_band *sband; - const struct rt2x00_rate *rate; unsigned int header_length; bool l2pad; - unsigned int i; - int idx = -1; - + int rate_idx; /* * Allocate a new sk_buffer. If no new buffer available, drop the * received frame and reuse the existing buffer. @@ -379,26 +414,17 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, rt2x00queue_payload_align(entry->skb, l2pad, header_length); /* - * Update RX statistics. + * Check if the frame was received using HT. In that case, + * the rate is the MCS index and should be passed to mac80211 + * directly. Otherwise we need to translate the signal to + * the correct bitrate index. */ - sband = &rt2x00dev->bands[rt2x00dev->curr_band]; - for (i = 0; i < sband->n_bitrates; i++) { - rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - - if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && - (rate->plcp == rxdesc.signal)) || - ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) && - (rate->bitrate == rxdesc.signal))) { - idx = i; - break; - } - } - - if (idx < 0) { - WARNING(rt2x00dev, "Frame received with unrecognized signal," - "signal=0x%.2x, type=%d.\n", rxdesc.signal, - (rxdesc.dev_flags & RXDONE_SIGNAL_MASK)); - idx = 0; + if (rxdesc.rate_mode == RATE_MODE_CCK || + rxdesc.rate_mode == RATE_MODE_OFDM) { + rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc); + } else { + rxdesc.flags |= RX_FLAG_HT; + rate_idx = rxdesc.signal; } /* @@ -408,7 +434,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, rt2x00debug_update_crypto(rt2x00dev, &rxdesc); rx_status->mactime = rxdesc.timestamp; - rx_status->rate_idx = idx; + rx_status->rate_idx = rate_idx; rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi); rx_status->signal = rxdesc.rssi; rx_status->noise = rxdesc.noise; @@ -443,72 +469,84 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = { .bitrate = 10, .ratemask = BIT(0), .plcp = 0x00, + .mcs = RATE_MCS(RATE_MODE_CCK, 0), }, { .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 20, .ratemask = BIT(1), .plcp = 0x01, + .mcs = RATE_MCS(RATE_MODE_CCK, 1), }, { .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 55, .ratemask = BIT(2), .plcp = 0x02, + .mcs = RATE_MCS(RATE_MODE_CCK, 2), }, { .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 110, .ratemask = BIT(3), .plcp = 0x03, + .mcs = RATE_MCS(RATE_MODE_CCK, 3), }, { .flags = DEV_RATE_OFDM, .bitrate = 60, .ratemask = BIT(4), .plcp = 0x0b, + .mcs = RATE_MCS(RATE_MODE_OFDM, 0), }, { .flags = DEV_RATE_OFDM, .bitrate = 90, .ratemask = BIT(5), .plcp = 0x0f, + .mcs = RATE_MCS(RATE_MODE_OFDM, 1), }, { .flags = DEV_RATE_OFDM, .bitrate = 120, .ratemask = BIT(6), .plcp = 0x0a, + .mcs = RATE_MCS(RATE_MODE_OFDM, 2), }, { .flags = DEV_RATE_OFDM, .bitrate = 180, .ratemask = BIT(7), .plcp = 0x0e, + .mcs = RATE_MCS(RATE_MODE_OFDM, 3), }, { .flags = DEV_RATE_OFDM, .bitrate = 240, .ratemask = BIT(8), .plcp = 0x09, + .mcs = RATE_MCS(RATE_MODE_OFDM, 4), }, { .flags = DEV_RATE_OFDM, .bitrate = 360, .ratemask = BIT(9), .plcp = 0x0d, + .mcs = RATE_MCS(RATE_MODE_OFDM, 5), }, { .flags = DEV_RATE_OFDM, .bitrate = 480, .ratemask = BIT(10), .plcp = 0x08, + .mcs = RATE_MCS(RATE_MODE_OFDM, 6), }, { .flags = DEV_RATE_OFDM, .bitrate = 540, .ratemask = BIT(11), .plcp = 0x0c, + .mcs = RATE_MCS(RATE_MODE_OFDM, 7), }, }; @@ -584,6 +622,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates; hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &rt2x00dev->bands[IEEE80211_BAND_2GHZ]; + memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap, + &spec->ht, sizeof(spec->ht)); } /* @@ -600,6 +640,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4]; hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &rt2x00dev->bands[IEEE80211_BAND_5GHZ]; + memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap, + &spec->ht, sizeof(spec->ht)); } return 0; diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c new file mode 100644 index 000000000000..e3cec839e540 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00ht.c @@ -0,0 +1,69 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 HT specific routines. + */ + +#include +#include + +#include "rt2x00.h" +#include "rt2x00lib.h" + +void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc, + const struct rt2x00_rate *hwrate) +{ + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; + + if (tx_info->control.sta) + txdesc->mpdu_density = + tx_info->control.sta->ht_cap.ampdu_density; + else + txdesc->mpdu_density = 0; + + txdesc->ba_size = 7; /* FIXME: What value is needed? */ + txdesc->stbc = 0; /* FIXME: What value is needed? */ + + txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs); + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + txdesc->mcs |= 0x08; + + /* + * Convert flags + */ + if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) + __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags); + + /* + * Determine HT Mix/Greenfield rate mode + */ + if (txrate->flags & IEEE80211_TX_RC_MCS) + txdesc->rate_mode = RATE_MODE_HT_MIX; + if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) + txdesc->rate_mode = RATE_MODE_HT_GREENFIELD; + if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags); + if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) + __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags); +} diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index aa284e48d2c2..ccc7ba4f3181 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -48,6 +48,7 @@ struct rt2x00_rate { unsigned short ratemask; unsigned short plcp; + unsigned short mcs; }; extern const struct rt2x00_rate rt2x00_supported_rates[12]; @@ -57,6 +58,14 @@ static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value) return &rt2x00_supported_rates[hw_value & 0xff]; } +#define RATE_MCS(__mode, __mcs) \ + ( (((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff) ) + +static inline int rt2x00_get_rate_mcs(const u16 mcs_value) +{ + return (mcs_value & 0x00ff); +} + /* * Radio control handlers. */ @@ -359,6 +368,21 @@ static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, } #endif /* CONFIG_RT2X00_LIB_CRYPTO */ +/* + * HT handlers. + */ +#ifdef CONFIG_RT2X00_LIB_HT +void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc, + const struct rt2x00_rate *hwrate); +#else +static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc, + const struct rt2x00_rate *hwrate) +{ +} +#endif /* CONFIG_RT2X00_LIB_HT */ + /* * RFkill handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index bc1742c1d51c..44e5b3279ca7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -361,6 +361,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * Apply TX descriptor handling by components */ rt2x00crypto_create_tx_descriptor(entry, txdesc); + rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate); rt2x00queue_create_tx_descriptor_seq(entry, txdesc); rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 13e0ece176a1..b5e06347c8a7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -35,9 +35,12 @@ * for USB devices this restriction does not apply, but the value of * 2432 makes sense since it is big enough to contain the maximum fragment * size according to the ieee802.11 specs. + * The aggregation size depends on support from the driver, but should + * be something around 3840 bytes. */ -#define DATA_FRAME_SIZE 2432 -#define MGMT_FRAME_SIZE 256 +#define DATA_FRAME_SIZE 2432 +#define MGMT_FRAME_SIZE 256 +#define AGGREGATION_SIZE 3840 /** * DOC: Number of entries per queue @@ -148,18 +151,20 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) * * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value. * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value. + * @RXDONE_SIGNAL_MCS: Signal field contains the mcs value. * @RXDONE_MY_BSS: Does this frame originate from device's BSS. * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data. * @RXDONE_CRYPTO_ICV: Driver provided ICV data. * @RXDONE_L2PAD: 802.11 payload has been padded to 4-byte boundary. */ enum rxdone_entry_desc_flags { - RXDONE_SIGNAL_PLCP = 1 << 0, - RXDONE_SIGNAL_BITRATE = 1 << 1, - RXDONE_MY_BSS = 1 << 2, - RXDONE_CRYPTO_IV = 1 << 3, - RXDONE_CRYPTO_ICV = 1 << 4, - RXDONE_L2PAD = 1 << 5, + RXDONE_SIGNAL_PLCP = BIT(0), + RXDONE_SIGNAL_BITRATE = BIT(1), + RXDONE_SIGNAL_MCS = BIT(2), + RXDONE_MY_BSS = BIT(3), + RXDONE_CRYPTO_IV = BIT(4), + RXDONE_CRYPTO_ICV = BIT(5), + RXDONE_L2PAD = BIT(6), }; /** @@ -168,7 +173,7 @@ enum rxdone_entry_desc_flags { * from &rxdone_entry_desc to a signal value type. */ #define RXDONE_SIGNAL_MASK \ - ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE ) + ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE | RXDONE_SIGNAL_MCS ) /** * struct rxdone_entry_desc: RX Entry descriptor @@ -182,6 +187,7 @@ enum rxdone_entry_desc_flags { * @size: Data size of the received frame. * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). + * @rate_mode: Rate mode (See @enum rate_modulation). * @cipher: Cipher type used during decryption. * @cipher_status: Decryption status. * @iv: IV/EIV data used during decryption. @@ -195,6 +201,7 @@ struct rxdone_entry_desc { int size; int flags; int dev_flags; + u16 rate_mode; u8 cipher; u8 cipher_status; @@ -248,6 +255,9 @@ struct txdone_entry_desc { * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared). * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware. * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware. + * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU. + * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth. + * @ENTRY_TXD_HT_SHORT_GI: Use short GI. */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, @@ -263,6 +273,9 @@ enum txentry_desc_flags { ENTRY_TXD_ENCRYPT_PAIRWISE, ENTRY_TXD_ENCRYPT_IV, ENTRY_TXD_ENCRYPT_MMIC, + ENTRY_TXD_HT_AMPDU, + ENTRY_TXD_HT_BW_40, + ENTRY_TXD_HT_SHORT_GI, }; /** @@ -278,7 +291,11 @@ enum txentry_desc_flags { * @length_low: PLCP length low word. * @signal: PLCP signal. * @service: PLCP service. + * @msc: MCS. + * @stbc: STBC. + * @ba_size: BA size. * @rate_mode: Rate mode (See @enum rate_modulation). + * @mpdu_density: MDPU density. * @retry_limit: Max number of retries. * @aifs: AIFS value. * @ifs: IFS value. @@ -302,7 +319,11 @@ struct txentry_desc { u16 signal; u16 service; + u16 mcs; + u16 stbc; + u16 ba_size; u16 rate_mode; + u16 mpdu_density; short retry_limit; short aifs; From 2516baa63bc7d05a6573a0f584135484ed182a87 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 27 Apr 2009 22:18:10 -0400 Subject: [PATCH 27/68] ath5k: correct interrupt storm warning Ben Greear points out that the "too many interrupts" message will never print in the intended case since the interrupt counter will be -1 after the loop. Change it to pre-decrement so it will be 0 on the thousandth iteration. Cc: Ben Greear Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 410fc4cfc4c6..7b80cebffd41 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2505,7 +2505,7 @@ ath5k_intr(int irq, void *dev_id) ath5k_hw_update_mib_counters(ah, &sc->ll_stats); } } - } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0); + } while (ath5k_hw_is_intr_pending(ah) && --counter > 0); if (unlikely(!counter)) ATH5K_WARN(sc, "too many interrupts, giving up for now\n"); From 4edf040afc9237aa8cc90bcf54b521ac47d1ed78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Stefanik?= Date: Thu, 23 Apr 2009 19:36:00 +0200 Subject: [PATCH 28/68] mac80211: Fix handling of retry count of NO_ACK frames in minstrel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make the retry count zero (total try count = 1) for frames with IEEE80211_TX_CTL_NO_ACK set. Also remove the check for is_multicast_ether_addr in use_low_rate, which is redundant because all multicasts have IEEE80211_TX_CTL_NO_ACK set. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- net/mac80211/rc80211_minstrel.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 3824990d340b..5196006b35e0 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -80,8 +80,7 @@ use_low_rate(struct sk_buff *skb) fc = le16_to_cpu(hdr->frame_control); return ((info->flags & IEEE80211_TX_CTL_NO_ACK) || - (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || - is_multicast_ether_addr(hdr->addr1)); + (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA); } @@ -245,7 +244,10 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta, if (!sta || !mi || use_low_rate(skb)) { ar[0].idx = rate_lowest_index(sband, sta); - ar[0].count = mp->max_retry; + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + ar[0].count = 1; + else + ar[0].count = mp->max_retry; return; } From 922368414e5700d1ed51510e54137359297d78e7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Stefanik?= Date: Thu, 23 Apr 2009 20:06:06 +0200 Subject: [PATCH 29/68] mac80211: Fix handling of retry count of NO_ACK frames in PID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make PID check for IEEE80211_TX_CTL_NO_ACK instead of is_multicast_ether_addr when determining whether to use the lowest rate, and set the retry count to 0 (total try count = 1) if IEEE80211_TX_CTL_NO_ACK is set. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- net/mac80211/rc80211_pid_algo.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index b16801cde06f..2b33e3a7ee7d 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -289,13 +289,15 @@ rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta, info->control.rates[0].count = txrc->hw->conf.short_frame_max_tx_count; - /* Send management frames and broadcast/multicast data using lowest - * rate. */ + /* Send management frames and NO_ACK data using lowest rate. */ fc = le16_to_cpu(hdr->frame_control); if (!sta || !spinfo || (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || - is_multicast_ether_addr(hdr->addr1)) { + info->flags & IEEE80211_TX_CTL_NO_ACK) { info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + info->control.rates[0].count = 1; + return; } From 514d65c18ee3595f7f9c9132895ed449f911ecd4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Stefanik?= Date: Thu, 23 Apr 2009 19:36:08 +0200 Subject: [PATCH 30/68] iwlwifi: Fix handling of retry count of NO_ACK frames in iwl-{3945|agn}-rs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make iwl-{3945|agn}-rs check for IEEE80211_TX_CTL_NO_ACK instead of is_multicast_ether_addr when determining whether to use the lowest rate, and set the retry count to 0 (total try count = 1) if IEEE80211_TX_CTL_NO_ACK is set. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 7 ++++--- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 22 ++++++++++++---------- 2 files changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index f63a9c5ba262..814afaf6d10b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -683,11 +683,10 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, if (sta) rate_mask = sta->supp_rates[sband->band]; - /* Send management frames and broadcast/multicast data using lowest - * rate. */ + /* Send management frames and NO_ACK data using lowest rate. */ fc = le16_to_cpu(hdr->frame_control); if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || - is_multicast_ether_addr(hdr->addr1) || + info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !priv_sta) { IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n"); if (!rate_mask) @@ -696,6 +695,8 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, else info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + info->control.rates[0].count = 1; return; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 3504279c7586..29d38b938f38 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -172,7 +172,7 @@ struct iwl_lq_sta { }; static void rs_rate_scale_perform(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, + struct sk_buff *skb, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta); static void rs_fill_link_cmd(const struct iwl_priv *priv, @@ -829,7 +829,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n"); if (!ieee80211_is_data(hdr->frame_control) || - is_multicast_ether_addr(hdr->addr1)) + info->flags & IEEE80211_TX_CTL_NO_ACK) return; /* This packet was aggregated but doesn't carry rate scale info */ @@ -995,7 +995,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, /* See if there's a better rate or modulation mode to try. */ if (sta && sta->supp_rates[sband->band]) - rs_rate_scale_perform(priv, hdr, sta, lq_sta); + rs_rate_scale_perform(priv, skb, sta, lq_sta); out: return; } @@ -1975,12 +1975,14 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta) * Do rate scaling and search for new modulation mode. */ static void rs_rate_scale_perform(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, + struct sk_buff *skb, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta) { struct ieee80211_hw *hw = priv->hw; struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; int low = IWL_RATE_INVALID; int high = IWL_RATE_INVALID; int index; @@ -2006,11 +2008,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n"); - /* Send management frames and broadcast/multicast data using - * lowest rate. */ + /* Send management frames and NO_ACK data using lowest rate. */ /* TODO: this could probably be improved.. */ if (!ieee80211_is_data(hdr->frame_control) || - is_multicast_ether_addr(hdr->addr1)) + info->flags & IEEE80211_TX_CTL_NO_ACK) return; if (!sta || !lq_sta) @@ -2450,16 +2451,17 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, if (sta) mask_bit = sta->supp_rates[sband->band]; - /* Send management frames and broadcast/multicast data using lowest - * rate. */ + /* Send management frames and NO_ACK data using lowest rate. */ if (!ieee80211_is_data(hdr->frame_control) || - is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) { + info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !lq_sta) { if (!mask_bit) info->control.rates[0].idx = rate_lowest_index(sband, NULL); else info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + info->control.rates[0].count = 1; return; } From 97d3f458a1e3350dfcbdc3b6aefa75d20d59ee17 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Stefanik?= Date: Thu, 23 Apr 2009 19:36:11 +0200 Subject: [PATCH 31/68] ath9k: Fix handling of retry count of NO_ACK frames MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Check for IEEE80211_TX_CTL_NO_ACK instead of is_multicast_ether_addr when determining whether to use lowest rate without retries. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/rc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 8f3cf10f65c4..e526dbce57d1 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1568,12 +1568,13 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, struct ath_rate_priv *ath_rc_priv = priv_sta; __le16 fc = hdr->frame_control; - /* lowest rate for management and multicast/broadcast frames */ - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || - !sta) { + /* lowest rate for management and NO_ACK frames */ + if (!ieee80211_is_data(fc) || + tx_info->flags & IEEE80211_TX_CTL_NO_ACK || !sta) { tx_info->control.rates[0].idx = rate_lowest_index(sband, sta); tx_info->control.rates[0].count = - is_multicast_ether_addr(hdr->addr1) ? 1 : ATH_MGT_TXMAXTRY; + (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) ? + 1 : ATH_MGT_TXMAXTRY; return; } From 9955151df7c6452cae2ed9649f53d265c91cf155 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Stefanik?= Date: Thu, 23 Apr 2009 19:36:14 +0200 Subject: [PATCH 32/68] mac80211: Warn if the rate controller requests retries for a NO_ACK frame MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To deter future rate scaling algorithm writers from requesting NO_ACK packets to be retried, throw a WARN_ON_ONCE if the algorithm hands us a try count over 1 for NO_ACK packet. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- net/mac80211/tx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1564a3018cf5..36e8e2de980c 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -558,6 +558,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) if (unlikely(!info->control.rates[0].count)) info->control.rates[0].count = 1; + if (WARN_ON_ONCE((info->control.rates[0].count > 1) && + (info->flags & IEEE80211_TX_CTL_NO_ACK))) + info->control.rates[0].count = 1; + if (is_multicast_ether_addr(hdr->addr1)) { /* * XXX: verify the rate is in the basic rateset From 5cff20e6c5a6591a79d3b027af222870f52bb550 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Apr 2009 12:26:17 +0200 Subject: [PATCH 33/68] mac80211: tell driver when idle When we aren't doing anything in mac80211, we can turn off much of the hardware, depending on the driver/hw. Not doing anything, aka being idle, means: * no monitor interfaces * no AP/mesh/wds interfaces * any station interfaces are in DISABLED state * any IBSS interfaces aren't trying to be in a network * we aren't trying to scan By creating a new function that verifies these conditions and calling it at strategic points where the states of those conditions change, we can easily make mac80211 tell the driver when we are idle to save power. Additionally, this fixes a small quirk where a recalculated powersave state is passed to the driver even if the hardware is about to stopped completely. This patch intentionally doesn't touch radio_enabled because that is currently implemented to be a soft rfkill which is inappropriate here when we need to be able to wake up with low latency. One thing I'm not entirely sure about is this: phy0: device no longer idle - in use wlan0: direct probe to AP 00:11:24:91:07:4d try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:11:24:91:07:4d wlan0: authenticated > phy0: device now idle > phy0: device no longer idle - in use wlan0: associate with AP 00:11:24:91:07:4d wlan0: RX AssocResp from 00:11:24:91:07:4d (capab=0x401 status=0 aid=1) wlan0: associated Is it appropriate to go into idle state for a short time when we have just authenticated, but not associated yet? This happens only with the userspace SME, because we cannot really know how long it will wait before asking us to associate. Would going idle after a short timeout be more appropriate? We may need to revisit this, depending on what happens. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 6 ++- include/net/mac80211.h | 8 +++ net/mac80211/ibss.c | 5 ++ net/mac80211/ieee80211_i.h | 2 + net/mac80211/iface.c | 78 ++++++++++++++++++++++++++- net/mac80211/mlme.c | 11 ++++ net/mac80211/scan.c | 17 +++--- 7 files changed, 113 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 8fa6e6ce5705..b1213b6a6b9f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -553,9 +553,11 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) struct mac80211_hwsim_data *data = hw->priv; struct ieee80211_conf *conf = &hw->conf; - printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d)\n", + printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d idle=%d ps=%d)\n", wiphy_name(hw->wiphy), __func__, - conf->channel->center_freq, conf->radio_enabled); + conf->channel->center_freq, conf->radio_enabled, + !!(conf->flags & IEEE80211_CONF_IDLE), + !!(conf->flags & IEEE80211_CONF_PS)); data->channel = conf->channel; data->radio_enabled = conf->radio_enabled; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7806e22f4ace..38dc1cd10270 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -533,10 +533,16 @@ struct ieee80211_rx_status { * * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only) + * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set + * the driver should be prepared to handle configuration requests but + * may turn the device off as much as possible. Typically, this flag will + * be set when an interface is set UP but not associated or scanning, but + * it can also be unset in that case when monitor interfaces are active. */ enum ieee80211_conf_flags { IEEE80211_CONF_RADIOTAP = (1<<0), IEEE80211_CONF_PS = (1<<1), + IEEE80211_CONF_IDLE = (1<<2), }; @@ -551,6 +557,7 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_POWER: the TX power changed * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed + * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), @@ -561,6 +568,7 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_POWER = BIT(5), IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), + IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; static inline __deprecated enum ieee80211_conf_changed diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index a8e23232267e..aa537681f87c 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -862,6 +862,8 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.ssid_len = params->ssid_len; + ieee80211_recalc_idle(sdata->local); + set_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request); queue_work(sdata->local->hw.workqueue, &sdata->u.ibss.work); @@ -889,6 +891,9 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) skb_queue_purge(&sdata->u.ibss.skb_queue); memset(sdata->u.ibss.bssid, 0, ETH_ALEN); + sdata->u.ibss.ssid_len = 0; + + ieee80211_recalc_idle(sdata->local); return 0; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 236ea098bb6c..03e0d22603c8 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -985,6 +985,8 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, enum nl80211_iftype type); void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata); void ieee80211_remove_interfaces(struct ieee80211_local *local); +u32 __ieee80211_recalc_idle(struct ieee80211_local *local); +void ieee80211_recalc_idle(struct ieee80211_local *local); /* tx handling */ void ieee80211_clear_tx_pending(struct ieee80211_local *local); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 256fa19e14ec..8b6daf0219f4 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -301,6 +301,8 @@ static int ieee80211_open(struct net_device *dev) if (sdata->flags & IEEE80211_SDATA_PROMISC) atomic_inc(&local->iff_promiscs); + hw_reconf_flags |= __ieee80211_recalc_idle(local); + local->open_count++; if (hw_reconf_flags) { ieee80211_hw_config(local, hw_reconf_flags); @@ -548,6 +550,10 @@ static int ieee80211_stop(struct net_device *dev) sdata->bss = NULL; + hw_reconf_flags |= __ieee80211_recalc_idle(local); + + ieee80211_recalc_ps(local, -1); + if (local->open_count == 0) { if (netif_running(local->mdev)) dev_close(local->mdev); @@ -565,8 +571,6 @@ static int ieee80211_stop(struct net_device *dev) hw_reconf_flags = 0; } - ieee80211_recalc_ps(local, -1); - /* do after stop to avoid reconfiguring when we stop anyway */ if (hw_reconf_flags) ieee80211_hw_config(local, hw_reconf_flags); @@ -892,3 +896,73 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) unregister_netdevice(sdata->dev); } } + +static u32 ieee80211_idle_off(struct ieee80211_local *local, + const char *reason) +{ + if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) + return 0; + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + printk(KERN_DEBUG "%s: device no longer idle - %s\n", + wiphy_name(local->hw.wiphy), reason); +#endif + + local->hw.conf.flags &= ~IEEE80211_CONF_IDLE; + return IEEE80211_CONF_CHANGE_IDLE; +} + +static u32 ieee80211_idle_on(struct ieee80211_local *local) +{ + if (local->hw.conf.flags & IEEE80211_CONF_IDLE) + return 0; + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + printk(KERN_DEBUG "%s: device now idle\n", + wiphy_name(local->hw.wiphy)); +#endif + + local->hw.conf.flags |= IEEE80211_CONF_IDLE; + return IEEE80211_CONF_CHANGE_IDLE; +} + +u32 __ieee80211_recalc_idle(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + int count = 0; + + if (local->hw_scanning || local->sw_scanning) + return ieee80211_idle_off(local, "scanning"); + + list_for_each_entry(sdata, &local->interfaces, list) { + if (!netif_running(sdata->dev)) + continue; + /* do not count disabled managed interfaces */ + if (sdata->vif.type == NL80211_IFTYPE_STATION && + sdata->u.mgd.state == IEEE80211_STA_MLME_DISABLED) + continue; + /* do not count unused IBSS interfaces */ + if (sdata->vif.type == NL80211_IFTYPE_ADHOC && + !sdata->u.ibss.ssid_len) + continue; + /* count everything else */ + count++; + } + + if (!count) + return ieee80211_idle_on(local); + else + return ieee80211_idle_off(local, "in use"); + + return 0; +} + +void ieee80211_recalc_idle(struct ieee80211_local *local) +{ + u32 chg; + + mutex_lock(&local->iflist_mtx); + chg = __ieee80211_recalc_idle(local); + mutex_unlock(&local->iflist_mtx); + ieee80211_hw_config(local, chg); +} diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 2ded4766d014..5509c5aa6beb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -890,6 +890,7 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata) printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n", sdata->dev->name, ifmgd->bssid); ifmgd->state = IEEE80211_STA_MLME_DISABLED; + ieee80211_recalc_idle(local); cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid); /* @@ -938,6 +939,7 @@ static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata) " timed out\n", sdata->dev->name, ifmgd->bssid); ifmgd->state = IEEE80211_STA_MLME_DISABLED; + ieee80211_recalc_idle(local); cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid); ieee80211_rx_bss_remove(sdata, ifmgd->bssid, sdata->local->hw.conf.channel->center_freq, @@ -1041,6 +1043,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); + ieee80211_recalc_idle(local); + /* channel(_type) changes are handled by ieee80211_hw_config */ local->oper_channel_type = NL80211_CHAN_NO_HT; @@ -1121,6 +1125,7 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata) " timed out\n", sdata->dev->name, ifmgd->bssid); ifmgd->state = IEEE80211_STA_MLME_DISABLED; + ieee80211_recalc_idle(local); cfg80211_send_assoc_timeout(sdata->dev, ifmgd->bssid); ieee80211_rx_bss_remove(sdata, ifmgd->bssid, sdata->local->hw.conf.channel->center_freq, @@ -1141,6 +1146,7 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata) printk(KERN_DEBUG "%s: mismatch in privacy configuration and " "mixed-cell disabled - abort association\n", sdata->dev->name); ifmgd->state = IEEE80211_STA_MLME_DISABLED; + ieee80211_recalc_idle(local); return; } @@ -1279,6 +1285,7 @@ static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata) if (ifmgd->flags & IEEE80211_STA_EXT_SME) { /* Wait for SME to request association */ ifmgd->state = IEEE80211_STA_MLME_DISABLED; + ieee80211_recalc_idle(sdata->local); } else ieee80211_associate(sdata); } @@ -1515,6 +1522,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_EXT_SME) { /* Wait for SME to decide what to do next */ ifmgd->state = IEEE80211_STA_MLME_DISABLED; + ieee80211_recalc_idle(local); } return; } @@ -2083,6 +2091,7 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata) } else { ifmgd->assoc_scan_tries = 0; ifmgd->state = IEEE80211_STA_MLME_DISABLED; + ieee80211_recalc_idle(local); } } return -1; @@ -2126,6 +2135,8 @@ static void ieee80211_sta_work(struct work_struct *work) } else if (!test_and_clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request)) return; + ieee80211_recalc_idle(local); + switch (ifmgd->state) { case IEEE80211_STA_MLME_DISABLED: break; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 127bd54e0e38..c99ef8d04d3d 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -302,17 +302,9 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) /* we only have to protect scan_req and hw/sw scan */ mutex_unlock(&local->scan_mtx); - if (was_hw_scan) { - /* - * Somebody might have requested channel change during scan - * that we won't have acted upon, try now. ieee80211_hw_config - * will set the flag based on actual changes. - */ - ieee80211_hw_config(local, 0); - goto done; - } - ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + if (was_hw_scan) + goto done; netif_tx_lock_bh(local->mdev); netif_addr_lock(local->mdev); @@ -351,6 +343,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) mutex_unlock(&local->iflist_mtx); done: + ieee80211_recalc_idle(local); ieee80211_mlme_notify_scan_completed(local); ieee80211_ibss_notify_scan_completed(local); ieee80211_mesh_notify_scan_completed(local); @@ -471,6 +464,8 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, * dependency, so that the scan completed calls * have more locking freedom. */ + + ieee80211_recalc_idle(local); mutex_unlock(&local->scan_mtx); if (local->ops->hw_scan) @@ -487,6 +482,8 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, } else local->sw_scanning = false; + ieee80211_recalc_idle(local); + local->scan_req = NULL; local->scan_sdata = NULL; } From fb4a3d35a26aa8ef5049f10666e6a163b4c32855 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 29 Apr 2009 13:01:58 +0200 Subject: [PATCH 34/68] ath9k: uninline ath9k_io{read,write}32 routines The spin_lock handling uses lots of instructions on some archs. With this patch the size of the ath9k module will be significantly smaller. Signed-off-by: Gabor Juhos Acked-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 33 ++------------------------ drivers/net/wireless/ath/ath9k/hw.c | 32 +++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 31 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index d5084ddf44ff..90b6314a8169 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -697,36 +697,7 @@ void ath9k_wiphy_pause_all_forced(struct ath_softc *sc, bool ath9k_wiphy_scanning(struct ath_softc *sc); void ath9k_wiphy_work(struct work_struct *work); -/* - * Read and write, they both share the same lock. We do this to serialize - * reads and writes on Atheros 802.11n PCI devices only. This is required - * as the FIFO on these devices can only accept sanely 2 requests. After - * that the device goes bananas. Serializing the reads/writes prevents this - * from happening. - */ - -static inline void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val) -{ - if (ah->config.serialize_regmode == SER_REG_MODE_ON) { - unsigned long flags; - spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags); - iowrite32(val, ah->ah_sc->mem + reg_offset); - spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags); - } else - iowrite32(val, ah->ah_sc->mem + reg_offset); -} - -static inline unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset) -{ - u32 val; - if (ah->config.serialize_regmode == SER_REG_MODE_ON) { - unsigned long flags; - spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags); - val = ioread32(ah->ah_sc->mem + reg_offset); - spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags); - } else - val = ioread32(ah->ah_sc->mem + reg_offset); - return val; -} +void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val); +unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset); #endif /* ATH9K_H */ diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ec2a7a40b00d..02f40154e831 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -84,6 +84,38 @@ static u32 ath9k_hw_mac_to_clks(struct ath_hw *ah, u32 usecs) return ath9k_hw_mac_clks(ah, usecs); } +/* + * Read and write, they both share the same lock. We do this to serialize + * reads and writes on Atheros 802.11n PCI devices only. This is required + * as the FIFO on these devices can only accept sanely 2 requests. After + * that the device goes bananas. Serializing the reads/writes prevents this + * from happening. + */ + +void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val) +{ + if (ah->config.serialize_regmode == SER_REG_MODE_ON) { + unsigned long flags; + spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags); + iowrite32(val, ah->ah_sc->mem + reg_offset); + spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags); + } else + iowrite32(val, ah->ah_sc->mem + reg_offset); +} + +unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset) +{ + u32 val; + if (ah->config.serialize_regmode == SER_REG_MODE_ON) { + unsigned long flags; + spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags); + val = ioread32(ah->ah_sc->mem + reg_offset); + spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags); + } else + val = ioread32(ah->ah_sc->mem + reg_offset); + return val; +} + bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout) { int i; From 206eade5a68f7a06adbe7c65e47fd88843ad0546 Mon Sep 17 00:00:00 2001 From: Alban Browaeys Date: Wed, 29 Apr 2009 22:00:23 +0200 Subject: [PATCH 35/68] rt2x00: Style fix for interval defines Extra parenthesis are not needed in these 2 cases, all other defines in rt2x00 are done without parenthesis so just fixup these 2 cases. Signed-off-by: Alban Browaeys Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00lib.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index ccc7ba4f3181..39e00b3d7811 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -32,8 +32,8 @@ * Interval defines * Both the link tuner as the rfkill will be called once per second. */ -#define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) ) -#define RFKILL_POLL_INTERVAL ( 1000 ) +#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ) +#define RFKILL_POLL_INTERVAL 1000 /* * rt2x00_rate: Per rate device information From d53d9e67b55f6a9fc3f836c5c392eb41ce5676f4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 26 Apr 2009 15:47:48 +0200 Subject: [PATCH 36/68] rt2x00: Implement support for rt2800usb Add support for the rt2800usb chipset. Current problems: * Cannot scan 11n AP's * No TX during first minute after association * Broken Hardware encryption Includes various patches from Mattias, Felix, Xose and Axel. Signed-off-by: Mattias Nissler Signed-off-by: Felix Fietkau Signed-off-by: Xose Vazquez Perez Signed-off-by: Axel Kollhofer Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 14 + drivers/net/wireless/rt2x00/Makefile | 1 + drivers/net/wireless/rt2x00/rt2800usb.c | 3046 +++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 1 + 5 files changed, 4996 insertions(+) create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 4338c93d5b63..18ee7d6c4028 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -77,6 +77,20 @@ config RT73USB When compiled as a module, this driver will be called "rt73usb.ko". +config RT2800USB + tristate "Ralink rt2800 (USB) support" + depends on USB + select RT2X00_LIB_USB + select RT2X00_LIB_HT + select RT2X00_LIB_FIRMWARE + select RT2X00_LIB_CRYPTO + select CRC_CCITT + ---help--- + This adds support for rt2800 wireless chipset family. + Supported chips: RT2770, RT2870 & RT3070. + + When compiled as a module, this driver will be called "rt2800usb.ko". + config RT2X00_LIB_PCI tristate select RT2X00_LIB diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 776ec2b8c4e7..bfc7226f0afe 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_RT2500PCI) += rt2500pci.o obj-$(CONFIG_RT61PCI) += rt61pci.o obj-$(CONFIG_RT2500USB) += rt2500usb.o obj-$(CONFIG_RT73USB) += rt73usb.o +obj-$(CONFIG_RT2800USB) += rt2800usb.o diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c new file mode 100644 index 000000000000..812912e508cd --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -0,0 +1,3046 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800usb + Abstract: rt2800usb device specific routines. + Supported chipsets: RT2800U. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00usb.h" +#include "rt2800usb.h" + +/* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 1; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2x00usb_register_read and rt2x00usb_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + * The _lock versions must be used if you already hold the csr_mutex + */ +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RFCSR(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \ + H2M_MAILBOX_CSR_OWNER, (__reg)) + +static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); + + rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); + + rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + + WAIT_FOR_BBP(rt2x00dev, ®); + } + + *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + + WAIT_FOR_RFCSR(rt2x00dev, ®); + } + + *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); + rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); + + rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev, + const u8 command, const u8 token, + const u8 arg0, const u8 arg1) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the MCU becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_MCU(rt2x00dev, ®)) { + rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); + rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); + + reg = 0; + rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); + rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +static const struct rt2x00debug rt2800usb_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2x00usb_register_read, + .write = rt2x00usb_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2800usb_bbp_read, + .write = rt2800usb_bbp_write, + .word_base = BBP_BASE, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2800usb_rf_write, + .word_base = RF_BASE, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +#ifdef CONFIG_RT2X00_LIB_RFKILL +static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); +} +#else +#define rt2800usb_rfkill_poll NULL +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + +#ifdef CONFIG_RT2X00_LIB_LEDS +static void rt2800usb_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + unsigned int polarity = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_POLARITY); + unsigned int ledmode = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_MODE); + + if (led->type == LED_TYPE_RADIO) { + rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? 0x20 : 0); + } else if (led->type == LED_TYPE_ASSOC) { + rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * The specs tell us the following levels: + * 0, 1 ,3, 7, 15, 31 + * to determine the level in a simple way we can simply + * work with bitshifting: + * (1 << level) - 1 + */ + rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, + (1 << brightness / (LED_FULL / 6)) - 1, + polarity); + } +} + +static int rt2800usb_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; + + rt2x00usb_register_read(led->rt2x00dev, LED_CFG, ®); + rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); + rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); + rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); + rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); + rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg); + + return 0; +} + +static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2800usb_brightness_set; + led->led_dev.blink_set = rt2800usb_blink_set; + led->flags = LED_INITIALIZED; +} +#endif /* CONFIG_RT2X00_LIB_LEDS */ + +/* + * Configuration handlers. + */ +static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct mac_wcid_entry wcid_entry; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + u32 reg; + + offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); + + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, + (crypto->cmd == SET_KEY) * crypto->bssidx); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); + rt2x00usb_register_write(rt2x00dev, offset, reg); + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); + + memset(&iveiv_entry, 0, sizeof(iveiv_entry)); + if ((crypto->cipher == CIPHER_TKIP) || + (crypto->cipher == CIPHER_TKIP_NO_MIC) || + (crypto->cipher == CIPHER_AES)) + iveiv_entry.iv[3] |= 0x20; + iveiv_entry.iv[3] |= key->keyidx << 6; + rt2x00usb_register_multiwrite(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + offset = MAC_WCID_ENTRY(key->hw_key_idx); + + memset(&wcid_entry, 0, sizeof(wcid_entry)); + if (crypto->cmd == SET_KEY) + memcpy(&wcid_entry, crypto->address, ETH_ALEN); + rt2x00usb_register_multiwrite(rt2x00dev, offset, + &wcid_entry, sizeof(wcid_entry)); +} + +static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + int timeout; + u32 offset; + u32 reg; + + if (crypto->cmd == SET_KEY) { + key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = SHARED_KEY_ENTRY(key->hw_key_idx); + timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + offset, &key_entry, + sizeof(key_entry), + timeout); + } + + /* + * The cipher types are stored over multiple registers + * starting with SHARED_KEY_MODE_BASE each word will have + * 32 bits and contains the cipher types for 2 bssidx each. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + field.bit_offset = 4 * (key->hw_key_idx % 8); + field.bit_mask = 0x7 << field.bit_offset; + + offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); + + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00usb_register_write(rt2x00dev, offset, reg); + + /* + * Update WCID information + */ + rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} + +static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + int timeout; + u32 offset; + + if (crypto->cmd == SET_KEY) { + /* + * 1 pairwise key is possible per AID, this means that the AID + * equals our hw_key_idx. Make sure the WCID starts _after_ the + * last possible shared key entry. + */ + if (crypto->aid > (256 - 32)) + return -ENOSPC; + + key->hw_key_idx = 32 + crypto->aid; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + offset, &key_entry, + sizeof(key_entry), + timeout); + } + + /* + * Update WCID information + */ + rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} + +static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) +{ + u32 reg; + + /* + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. + */ + rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, ®); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, + !(filter_flags & FIF_CONTROL)); + rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg); +} + +static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) +{ + unsigned int beacon_base; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2x00usb_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); + conf->bssid[1] = cpu_to_le32(reg); + + rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, + conf->bssid, sizeof(conf->bssid)); + } +} + +static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) +{ + u32 reg; + + rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, + DIV_ROUND_UP(erp->ack_timeout, erp->slot_time)); + rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, + !!erp->short_preamble); + rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, + !!erp->short_preamble); + rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, + erp->cts_protection ? 2 : 0); + rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, + erp->basic_rates); + rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); + rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, ®); + rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); + rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); + rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg); +} + +static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant) +{ + u8 r1; + u8 r3; + + rt2800usb_bbp_read(rt2x00dev, 1, &r1); + rt2800usb_bbp_read(rt2x00dev, 3, &r3); + + /* + * Configure the TX antenna. + */ + switch ((int)ant->tx) { + case 1: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); + break; + case 3: + /* Do nothing */ + break; + } + + /* + * Configure the RX antenna. + */ + switch ((int)ant->rx) { + case 1: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); + break; + case 3: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); + break; + } + + rt2800usb_bbp_write(rt2x00dev, 3, r3); + rt2800usb_bbp_write(rt2x00dev, 1, r1); +} + +static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain; + + if (libconf->rf.channel <= 14) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); + } else if (libconf->rf.channel <= 64) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); + } else if (libconf->rf.channel <= 128) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); + } + + rt2x00dev->lna_gain = lna_gain; +} + +static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + if (rt2x00dev->default_ant.tx == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); + + if (rt2x00dev->default_ant.rx == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + } else if (rt2x00dev->default_ant.rx == 2) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + + if (rf->channel > 14) { + /* + * When TX power is below 0, we should increase it by 7 to + * make it a positive value (Minumum value is -7). + * However this means that values between 0 and 7 have + * double meaning, and we should set a 7DBm boost flag. + */ + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, + (info->tx_power1 >= 0)); + + if (info->tx_power1 < 0) + info->tx_power1 += 7; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power1)); + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, + (info->tx_power2 >= 0)); + + if (info->tx_power2 < 0) + info->tx_power2 += 7; + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power2)); + } else { + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power2)); + } + + rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); + + rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); + rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); + rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); + rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); + rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); + rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); + rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); +} + +static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + + rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); + rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); + + rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); + rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); + + rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); + + rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); + rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); + + rt2800usb_rfcsr_write(rt2x00dev, 24, + rt2x00dev->calibration[conf_is_ht40(conf)]); + + rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); + rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); +} + +static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u32 reg; + unsigned int tx_pin; + u8 bbp; + + if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) + rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info); + else + rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info); + + /* + * Change BBP settings + */ + rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + rt2800usb_bbp_write(rt2x00dev, 86, 0); + + if (rf->channel <= 14) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { + rt2800usb_bbp_write(rt2x00dev, 82, 0x62); + rt2800usb_bbp_write(rt2x00dev, 75, 0x46); + } else { + rt2800usb_bbp_write(rt2x00dev, 82, 0x84); + rt2800usb_bbp_write(rt2x00dev, 75, 0x50); + } + } else { + rt2800usb_bbp_write(rt2x00dev, 82, 0xf2); + + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + rt2800usb_bbp_write(rt2x00dev, 75, 0x46); + else + rt2800usb_bbp_write(rt2x00dev, 75, 0x50); + } + + rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, ®); + rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); + rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); + rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg); + + tx_pin = 0; + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.tx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); + } + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.rx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); + } + + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); + + rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + + rt2800usb_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); + rt2800usb_bbp_write(rt2x00dev, 4, bbp); + + rt2800usb_bbp_read(rt2x00dev, 3, &bbp); + rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2800usb_bbp_write(rt2x00dev, 3, bbp); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + if (conf_is_ht40(conf)) { + rt2800usb_bbp_write(rt2x00dev, 69, 0x1a); + rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); + rt2800usb_bbp_write(rt2x00dev, 73, 0x16); + } else { + rt2800usb_bbp_write(rt2x00dev, 69, 0x16); + rt2800usb_bbp_write(rt2x00dev, 70, 0x08); + rt2800usb_bbp_write(rt2x00dev, 73, 0x11); + } + } + + msleep(1); +} + +static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + u32 reg; + u32 value = TXPOWER_G_TO_DEV(txpower); + u8 r1; + + rt2800usb_bbp_read(rt2x00dev, 1, &r1); + rt2x00_set_field8(®, BBP1_TX_POWER, 0); + rt2800usb_bbp_write(rt2x00dev, 1, r1); + + rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, ®); + rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); + rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg); + + rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, ®); + rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); + rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg); + + rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, ®); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); + rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg); + + rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, ®); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); + rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg); + + rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, ®); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); + rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg); +} + +static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; + + rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, ®); + rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, + libconf->conf->short_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); + rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); + rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg); +} + +static void rt2800usb_config_duration(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; + + rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, + libconf->conf->beacon_int * 16); + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); +} + +static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); + + rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, + libconf->conf->listen_interval - 1); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); + rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + + rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); + } else { + rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); + + rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); + rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + } +} + +static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) +{ + /* Always recalculate LNA gain before changing configuration */ + rt2800usb_config_lna_gain(rt2x00dev, libconf); + + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) + rt2800usb_config_channel(rt2x00dev, libconf->conf, + &libconf->rf, &libconf->channel); + if (flags & IEEE80211_CONF_CHANGE_POWER) + rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level); + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2800usb_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) + rt2800usb_config_duration(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2800usb_config_ps(rt2x00dev, libconf); +} + +/* + * Link tuning + */ +static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); + qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); +} + +static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) +{ + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { + if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) + return 0x1c + (2 * rt2x00dev->lna_gain); + else + return 0x2e + rt2x00dev->lna_gain; + } + + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + return 0x32 + (rt2x00dev->lna_gain * 5) / 3; + else + return 0x3a + (rt2x00dev->lna_gain * 5) / 3; +} + +static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) +{ + if (qual->vgc_level != vgc_level) { + rt2800usb_bbp_write(rt2x00dev, 66, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } +} + +static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) +{ + rt2800usb_set_vgc(rt2x00dev, qual, + rt2800usb_get_default_vgc(rt2x00dev)); +} + +static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) +{ + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* + * When RSSI is better then -80 increase VGC level with 0x10 + */ + rt2800usb_set_vgc(rt2x00dev, qual, + rt2800usb_get_default_vgc(rt2x00dev) + + ((qual->rssi > -80) * 0x10)); +} + +/* + * Firmware functions + */ +static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) +{ + return FIRMWARE_RT2870; +} + +static bool rt2800usb_check_crc(const u8 *data, const size_t len) +{ + u16 fw_crc; + u16 crc; + + /* + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + fw_crc = (data[len - 2] << 8 | data[len - 1]); + + /* + * Use the crc ccitt algorithm. + * This will return the same value as the legacy driver which + * used bit ordering reversion on the both the firmware bytes + * before input input as well as on the final output. + * Obviously using crc ccitt directly is much more efficient. + */ + crc = crc_ccitt(~0, data, len - 2); + + /* + * There is a small difference between the crc-itu-t + bitrev and + * the crc-ccitt crc calculation. In the latter method the 2 bytes + * will be swapped, use swab16 to convert the crc to the correct + * value. + */ + crc = swab16(crc); + + return fw_crc == crc; +} + +static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; + size_t offset = 0; + + /* + * Firmware files: + * There are 2 variations of the rt2870 firmware. + * a) size: 4kb + * b) size: 8kb + * Note that (b) contains 2 seperate firmware blobs of 4k + * within the file. The first blob is the same firmware as (a), + * but the second blob is for the additional chipsets. + */ + if (len != 4096 && len != 8192) + return FW_BAD_LENGTH; + + /* + * Check if we need the upper 4kb firmware data or not. + */ + if ((len == 4096) && + (chipset != 0x2860) && + (chipset != 0x2872) && + (chipset != 0x3070)) + return FW_BAD_VERSION; + + /* + * 8kb firmware files must be checked as if it were + * 2 seperate firmware files. + */ + while (offset < len) { + if (!rt2800usb_check_crc(data + offset, 4096)) + return FW_BAD_CRC; + + offset += 4096; + } + + return FW_OK; +} + +static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + unsigned int i; + int status; + u32 reg; + u32 offset; + u32 length; + u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; + + /* + * Check which section of the firmware we need. + */ + if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) { + offset = 0; + length = 4096; + } else { + offset = 4096; + length = 4096; + } + + /* + * Wait for stable hardware. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + /* + * Write firmware to device. + */ + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE, + data + offset, length, + REGISTER_TIMEOUT32(length)); + + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); + + /* + * Send firmware request to device to load firmware, + * we need to specify a long timeout time. + */ + status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, + 0, USB_MODE_FIRMWARE, + REGISTER_TIMEOUT_FIRMWARE); + if (status < 0) { + ERROR(rt2x00dev, "Failed to write Firmware to device.\n"); + return status; + } + + /* + * Wait for device to stabilize. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "PBF system register not ready.\n"); + return -EBUSY; + } + + /* + * Initialize firmware. + */ + rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + msleep(1); + + return 0; +} + +/* + * Initialization functions. + */ +static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + unsigned int i; + + /* + * Wait untill BBP and RF are ready. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); + + rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); + rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, + USB_MODE_RESET, REGISTER_TIMEOUT); + + rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, ®); + rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ + rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg); + + rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, ®); + rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ + rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg); + + rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); + rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } else { + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); + rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + } + + rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); + rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); + rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); + rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); + if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && + rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); + else + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); + rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); + + rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); + + rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); + rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006); + + rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); + rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); + rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); + + rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, + IEEE80211_MAX_RTS_THRESHOLD); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); + rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); + rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + + /* + * ASIC will keep garbage value after boot, clear encryption keys. + */ + for (i = 0; i < 256; i++) { + u32 wcid[2] = { 0xffffffff, 0x00ffffff }; + rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), + wcid, sizeof(wcid)); + + rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); + rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); + } + + for (i = 0; i < 16; i++) + rt2x00usb_register_write(rt2x00dev, + SHARED_KEY_MODE_ENTRY(i), 0); + + /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0); + + rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, ®); + rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); + rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, ®); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); + rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg); + + rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, ®); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); + rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg); + + rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); + rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg); + + rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); + rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg); + + /* + * We must clear the error counters. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); + rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, ®); + rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, ®); + rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, ®); + rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, ®); + rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, ®); + + return 0; +} + +static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, ®); + if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) + return 0; + + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); + return -EACCES; +} + +static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u8 value; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800usb_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + return 0; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; +} + +static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) || + rt2800usb_wait_bbp_ready(rt2x00dev))) + return -EACCES; + + rt2800usb_bbp_write(rt2x00dev, 65, 0x2c); + rt2800usb_bbp_write(rt2x00dev, 66, 0x38); + rt2800usb_bbp_write(rt2x00dev, 69, 0x12); + rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); + rt2800usb_bbp_write(rt2x00dev, 73, 0x10); + rt2800usb_bbp_write(rt2x00dev, 81, 0x37); + rt2800usb_bbp_write(rt2x00dev, 82, 0x62); + rt2800usb_bbp_write(rt2x00dev, 83, 0x6a); + rt2800usb_bbp_write(rt2x00dev, 84, 0x99); + rt2800usb_bbp_write(rt2x00dev, 86, 0x00); + rt2800usb_bbp_write(rt2x00dev, 91, 0x04); + rt2800usb_bbp_write(rt2x00dev, 92, 0x00); + rt2800usb_bbp_write(rt2x00dev, 103, 0x00); + rt2800usb_bbp_write(rt2x00dev, 105, 0x05); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800usb_bbp_write(rt2x00dev, 69, 0x16); + rt2800usb_bbp_write(rt2x00dev, 73, 0x12); + } + + if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) { + rt2800usb_bbp_write(rt2x00dev, 84, 0x19); + } + + if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { + rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); + rt2800usb_bbp_write(rt2x00dev, 84, 0x99); + rt2800usb_bbp_write(rt2x00dev, 105, 0x05); + } + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + rt2800usb_bbp_write(rt2x00dev, reg_id, value); + } + } + + return 0; +} + +static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, + bool bw40, u8 rfcsr24, u8 filter_target) +{ + unsigned int i; + u8 bbp; + u8 rfcsr; + u8 passband; + u8 stopband; + u8 overtuned = 0; + + rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); + + rt2800usb_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); + rt2800usb_bbp_write(rt2x00dev, 4, bbp); + + rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); + rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * Set power & frequency of passband test tone + */ + rt2800usb_bbp_write(rt2x00dev, 24, 0); + + for (i = 0; i < 100; i++) { + rt2800usb_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + rt2800usb_bbp_read(rt2x00dev, 55, &passband); + if (passband) + break; + } + + /* + * Set power & frequency of stopband test tone + */ + rt2800usb_bbp_write(rt2x00dev, 24, 0x06); + + for (i = 0; i < 100; i++) { + rt2800usb_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + rt2800usb_bbp_read(rt2x00dev, 55, &stopband); + + if ((passband - stopband) <= filter_target) { + rfcsr24++; + overtuned += ((passband - stopband) == filter_target); + } else + break; + + rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); + } + + rfcsr24 -= !!overtuned; + + rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); + return rfcsr24; +} + +static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) +{ + u8 rfcsr; + u8 bbp; + + if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) + return 0; + + /* + * Init RF calibration. + */ + rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); + rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); + msleep(1); + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); + rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); + + rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); + rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); + rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); + rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); + rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); + + /* + * Set RX Filter calibration for 20MHz and 40MHz + */ + rt2x00dev->calibration[0] = + rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); + rt2x00dev->calibration[1] = + rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); + + /* + * Set back to initial state + */ + rt2800usb_bbp_write(rt2x00dev, 24, 0); + + rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); + rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * set BBP back to BW20 + */ + rt2800usb_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); + rt2800usb_bbp_write(rt2x00dev, 4, bbp); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + + rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, + (state == STATE_RADIO_RX_ON) || + (state == STATE_RADIO_RX_ON_LINK)); + rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); +} + +static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && + !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) + return 0; + + msleep(1); + } + + ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n"); + return -EACCES; +} + +static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 word; + + /* + * Initialize all registers. + */ + if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || + rt2800usb_init_registers(rt2x00dev) || + rt2800usb_init_bbp(rt2x00dev) || + rt2800usb_init_rfcsr(rt2x00dev))) + return -EIO; + + rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + udelay(50); + + rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + + rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®); + rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); + /* Don't use bulk in aggregation when working with USB 1.1 */ + rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, + (rt2x00dev->rx->usb_maxpacket == 512)); + rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128); + /* FIXME: Calculate this value based on Aggregation defines */ + rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT, 21); + rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); + rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); + rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); + rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + /* + * Send signal to firmware during boot time. + */ + rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + + /* + * Initialize LED control + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); + rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); + rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); + rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + word & 0xff, (word >> 8) & 0xff); + + return 0; +} + +static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0); + + /* Wait for DMA, ignore error */ + rt2800usb_wait_wpdma_ready(rt2x00dev); + + rt2x00usb_disable_radio(rt2x00dev); +} + +static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); + + if (state == STATE_AWAKE) + rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); + else + rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + + return 0; +} + +static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + /* + * Before the radio can be enabled, the device first has + * to be woken up. After that it needs a bit of time + * to be fully awake and the radio can be enabled. + */ + rt2800usb_set_state(rt2x00dev, STATE_AWAKE); + msleep(1); + retval = rt2800usb_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + /* + * After the radio has been disablee, the device should + * be put to sleep for powersaving. + */ + rt2800usb_disable_radio(rt2x00dev); + rt2800usb_set_state(rt2x00dev, STATE_SLEEP); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + case STATE_RADIO_RX_OFF: + case STATE_RADIO_RX_OFF_LINK: + rt2800usb_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + /* No support, but no error either */ + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt2800usb_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct txentry_desc *txdesc) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + __le32 *txi = skbdesc->desc; + __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)]; + u32 word; + + /* + * Initialize TX Info descriptor + */ + rt2x00_desc_read(txwi, 0, &word); + rt2x00_set_field32(&word, TXWI_W0_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); + rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); + rt2x00_set_field32(&word, TXWI_W0_TS, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_AMPDU, + test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density); + rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs); + rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs); + rt2x00_set_field32(&word, TXWI_W0_BW, + test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, + test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc); + rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); + rt2x00_desc_write(txwi, 0, word); + + rt2x00_desc_read(txwi, 1, &word); + rt2x00_set_field32(&word, TXWI_W1_ACK, + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_NSEQ, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); + rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, + test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? + txdesc->key_idx : 0xff); + rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, + skb->len - txdesc->l2pad); + rt2x00_set_field32(&word, TXWI_W1_PACKETID, + skbdesc->entry->entry_idx); + rt2x00_desc_write(txwi, 1, word); + + /* + * Always write 0 to IV/EIV fields, hardware will insert the IV + * from the IVEIV register when TXINFO_W0_WIV is set to 0. + * When TXINFO_W0_WIV is set to 1 it will use the IV data + * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which + * crypto entry in the registers should be used to encrypt the frame. + */ + _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); + _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); + + /* + * Initialize TX descriptor + */ + rt2x00_desc_read(txi, 0, &word); + rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, + skb->len + TXWI_DESC_SIZE); + rt2x00_set_field32(&word, TXINFO_W0_WIV, + !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); + rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); + rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); + rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0); + rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST, + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); + rt2x00_desc_write(txi, 0, word); +} + +/* + * TX data initialization + */ +static void rt2800usb_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + unsigned int beacon_base; + u32 reg; + + /* + * Add the descriptor in front of the skb. + */ + skb_push(entry->skb, entry->queue->desc_size); + memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len); + skbdesc->desc = entry->skb->data; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + /* + * Write entire beacon with descriptor to register. + */ + beacon_base = HW_BEACON_OFFSET(entry->entry_idx); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, beacon_base, + entry->skb->data, entry->skb->len, + REGISTER_TIMEOUT32(entry->skb->len)); + + /* + * Clean up the beacon skb. + */ + dev_kfree_skb(entry->skb); + entry->skb = NULL; +} + +static int rt2800usb_get_tx_data_len(struct queue_entry *entry) +{ + int length; + + /* + * The length _must_ include 4 bytes padding, + * it should always be multiple of 4, + * but it must _not_ be a multiple of the USB packet size. + */ + length = roundup(entry->skb->len + 4, 4); + length += (4 * !(length % entry->queue->usb_maxpacket)); + + return length; +} + +static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid queue) +{ + u32 reg; + + if (queue != QID_BEACON) { + rt2x00usb_kick_tx_queue(rt2x00dev, queue); + return; + } + + rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } +} + +/* + * RX control handlers + */ +static void rt2800usb_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + __le32 *rxd = (__le32 *)entry->skb->data; + __le32 *rxwi; + u32 rxd0; + u32 rxwi0; + u32 rxwi1; + u32 rxwi2; + u32 rxwi3; + + /* + * Copy descriptor to the skbdesc->desc buffer, making it safe from + * moving of frame data in rt2x00usb. + */ + memcpy(skbdesc->desc, rxd, skbdesc->desc_len); + rxd = (__le32 *)skbdesc->desc; + rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)]; + + /* + * It is now safe to read the descriptor on all architectures. + */ + rt2x00_desc_read(rxd, 0, &rxd0); + rt2x00_desc_read(rxwi, 0, &rxwi0); + rt2x00_desc_read(rxwi, 1, &rxwi1); + rt2x00_desc_read(rxwi, 2, &rxwi2); + rt2x00_desc_read(rxwi, 3, &rxwi3); + + if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR)) + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); + rxdesc->cipher_status = + rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR); + } + + if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) { + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. Unfortunately the descriptor doesn't contain + * any fields with the EIV/IV data either, so they can't + * be restored by rt2x00lib. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + + if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; + + if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD)) + rxdesc->dev_flags |= RXDONE_L2PAD; + + if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI)) + rxdesc->flags |= RX_FLAG_SHORT_GI; + + if (rt2x00_get_field32(rxwi1, RXWI_W1_BW)) + rxdesc->flags |= RX_FLAG_40MHZ; + + /* + * Detect RX rate, always use MCS as signal type. + */ + rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; + rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE); + rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS); + + /* + * Mask of 0x8 bit to remove the short preamble flag. + */ + if (rxdesc->rate_mode == RATE_MODE_CCK) + rxdesc->signal &= ~0x8; + + rxdesc->rssi = + (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + + rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; + + rxdesc->noise = + (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + + rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2; + + rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + + /* + * Remove RXWI descriptor from start of buffer. + */ + skb_pull(entry->skb, skbdesc->desc_len); + skb_trim(entry->skb, rxdesc->size); +} + +/* + * Device probe functions. + */ +static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u16 word; + u8 *mac; + u8 default_lna_gain; + + rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + DECLARE_MAC_BUF(macbuf); + + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); + } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { + /* + * There is a max of 2 RX streams for RT2870 series + */ + if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) + rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); + rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); + if ((word & 0x00ff) == 0x00ff) { + rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); + rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, + LED_MODE_TXRX_ACTIVITY); + rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); + EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); + } + + /* + * During the LNA validation we are going to use + * lna0 as correct value. Note that EEPROM_LNA + * is never validated. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); + default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); + if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, + default_lna_gain); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); + if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, + default_lna_gain); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + + return 0; +} + +static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00_set_chip(rt2x00dev, RT2870, value, reg); + + /* + * The check for rt2860 is not a typo, some rt2870 hardware + * identifies itself as rt2860 in the CSR register. + */ + if ((rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x2860) && + (rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x2870) && + (rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x3070)) { + ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); + return -ENODEV; + } + + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && + !rt2x00_rf(&rt2x00dev->chip, RF2750) && + !rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF2020)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->default_ant.tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); + rt2x00dev->default_ant.rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); + + /* + * Read frequency offset and RF programming sequence. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); + rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); + + /* + * Read external LNA informations. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) + __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) + __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + + /* + * Detect if this device has an hardware controlled radio. + */ +#ifdef CONFIG_RT2X00_LIB_RFKILL + if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + + /* + * Store led settings, for correct led behaviour. + */ +#ifdef CONFIG_RT2X00_LIB_LEDS + rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, + &rt2x00dev->led_mcu_reg); +#endif /* CONFIG_RT2X00_LIB_LEDS */ + + return 0; +} + +/* + * RF value list for rt2870 + * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) + */ +static const struct rf_channel rf_vals[] = { + { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, + { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, + { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, + { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, + { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, + { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, + { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, + { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, + { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, + { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, + { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, + { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, + { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, + { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, + { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, + { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, + { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, + { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, + { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, + { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, + { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, + { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, + { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, + { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, + { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, + + /* 802.11 HyperLan 2 */ + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, + { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, + { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, + { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, + { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, + { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, + { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, + { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, + { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, + { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, + { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, + { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, + + /* 802.11 UNII */ + { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, + { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, + { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, + { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, + { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, + { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, + { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, + { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, + { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, + { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, + { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, + + /* 802.11 Japan */ + { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, + { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, + { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, + { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, + { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, + { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, + { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, +}; + +/* + * RF value list for rt3070 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_3070[] = { + {1, 241, 2, 2 }, + {2, 241, 2, 7 }, + {3, 242, 2, 2 }, + {4, 242, 2, 7 }, + {5, 243, 2, 2 }, + {6, 243, 2, 7 }, + {7, 244, 2, 2 }, + {8, 244, 2, 7 }, + {9, 245, 2, 2 }, + {10, 245, 2, 7 }, + {11, 246, 2, 2 }, + {12, 246, 2, 7 }, + {13, 247, 2, 2 }, + {14, 248, 2, 4 }, +}; + +static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + struct channel_info *info; + char *tx_power1; + char *tx_power2; + unsigned int i; + u16 eeprom; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; + rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE; + + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Initialize HT information. + */ + spec->ht.ht_supported = true; + spec->ht.cap = + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_TX_STBC | + IEEE80211_HT_CAP_RX_STBC | + IEEE80211_HT_CAP_PSMP_SUPPORT; + spec->ht.ampdu_factor = 3; + spec->ht.ampdu_density = 4; + spec->ht.mcs.tx_params = + IEEE80211_HT_MCS_TX_DEFINED | + IEEE80211_HT_MCS_TX_RX_DIFF | + ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << + IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); + + switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { + case 3: + spec->ht.mcs.rx_mask[2] = 0xff; + case 2: + spec->ht.mcs.rx_mask[1] = 0xff; + case 1: + spec->ht.mcs.rx_mask[0] = 0xff; + spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ + break; + } + + /* + * Initialize hw_mode information. + */ + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; + + if (rt2x00_rf(&rt2x00dev->chip, RF2820) || + rt2x00_rf(&rt2x00dev->chip, RF2720)) { + spec->num_channels = 14; + spec->channels = rf_vals; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || + rt2x00_rf(&rt2x00dev->chip, RF2750)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; + spec->num_channels = ARRAY_SIZE(rf_vals); + spec->channels = rf_vals; + } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || + rt2x00_rf(&rt2x00dev->chip, RF2020)) { + spec->num_channels = ARRAY_SIZE(rf_vals_3070); + spec->channels = rf_vals_3070; + } + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); + tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); + + for (i = 0; i < 14; i++) { + info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); + info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); + } + + if (spec->num_channels > 14) { + tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); + tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); + + for (i = 14; i < spec->num_channels; i++) { + info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); + info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); + } + } + + return 0; +} + +static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + /* + * Allocate eeprom data. + */ + retval = rt2800usb_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2800usb_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + retval = rt2800usb_probe_hw_mode(rt2x00dev); + if (retval) + return retval; + + /* + * This device requires firmware. + */ + __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +/* + * IEEE80211 stack callback functions. + */ +static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, + u32 *iv32, u16 *iv16) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + + offset = MAC_IVEIV_ENTRY(hw_key_idx); + rt2x00usb_register_multiread(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); + memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); +} + +static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); + + rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); + rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); + rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); + rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); + rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); + rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); + rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + return 0; +} + +static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + u32 offset; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; + + /* + * We only need to perform additional register initialization + * for WMM queues/ + */ + if (queue_idx >= 4) + return 0; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); + field.bit_offset = (queue_idx & 1) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00usb_register_write(rt2x00dev, offset, reg); + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); + + /* Update EDCA registers */ + offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); + + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); + rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); + rt2x00usb_register_write(rt2x00dev, offset, reg); + + return 0; +} + +static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, ®); + tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; + rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, ®); + tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); + + return tsf; +} + +static const struct ieee80211_ops rt2800usb_mac80211_ops = { + .tx = rt2x00mac_tx, + .start = rt2x00mac_start, + .stop = rt2x00mac_stop, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, + .get_stats = rt2x00mac_get_stats, + .get_tkip_seq = rt2800usb_get_tkip_seq, + .set_rts_threshold = rt2800usb_set_rts_threshold, + .bss_info_changed = rt2x00mac_bss_info_changed, + .conf_tx = rt2800usb_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .get_tsf = rt2800usb_get_tsf, +}; + +static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { + .probe_hw = rt2800usb_probe_hw, + .get_firmware_name = rt2800usb_get_firmware_name, + .check_firmware = rt2800usb_check_firmware, + .load_firmware = rt2800usb_load_firmware, + .initialize = rt2x00usb_initialize, + .uninitialize = rt2x00usb_uninitialize, + .clear_entry = rt2x00usb_clear_entry, + .set_device_state = rt2800usb_set_device_state, + .rfkill_poll = rt2800usb_rfkill_poll, + .link_stats = rt2800usb_link_stats, + .reset_tuner = rt2800usb_reset_tuner, + .link_tuner = rt2800usb_link_tuner, + .write_tx_desc = rt2800usb_write_tx_desc, + .write_tx_data = rt2x00usb_write_tx_data, + .write_beacon = rt2800usb_write_beacon, + .get_tx_data_len = rt2800usb_get_tx_data_len, + .kick_tx_queue = rt2800usb_kick_tx_queue, + .kill_tx_queue = rt2x00usb_kill_tx_queue, + .fill_rxdone = rt2800usb_fill_rxdone, + .config_shared_key = rt2800usb_config_shared_key, + .config_pairwise_key = rt2800usb_config_pairwise_key, + .config_filter = rt2800usb_config_filter, + .config_intf = rt2800usb_config_intf, + .config_erp = rt2800usb_config_erp, + .config_ant = rt2800usb_config_ant, + .config = rt2800usb_config, +}; + +static const struct data_queue_desc rt2800usb_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = AGGREGATION_SIZE, + .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb), +}; + +static const struct data_queue_desc rt2800usb_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = AGGREGATION_SIZE, + .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb), +}; + +static const struct data_queue_desc rt2800usb_queue_bcn = { + .entry_num = 8 * BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb), +}; + +static const struct rt2x00_ops rt2800usb_ops = { + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 8, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .rx = &rt2800usb_queue_rx, + .tx = &rt2800usb_queue_tx, + .bcn = &rt2800usb_queue_bcn, + .lib = &rt2800usb_rt2x00_ops, + .hw = &rt2800usb_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt2800usb_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * rt2800usb module information. + */ +static struct usb_device_id rt2800usb_device_table[] = { + /* ??? */ + { USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Abocom */ + { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* AirTies */ + { USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Amigo */ + { USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Amit */ + { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* ASUS */ + { USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* AzureWave */ + { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Belkin */ + { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Buffalo */ + { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Conceptronic */ + { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Corega */ + { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* D-Link */ + { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Edimax */ + { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* EnGenius */ + { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Gemtek */ + { USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Gigabyte */ + { USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Hawking */ + { USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* LevelOne */ + { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Linksys */ + { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Logitec */ + { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Motorola */ + { USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Ovislink */ + { USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Pegatron */ + { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Philips */ + { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Planex */ + { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Qcom */ + { USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Quanta */ + { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Ralink */ + { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Samsung */ + { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Siemens */ + { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Sitecom */ + { USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* SMC */ + { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Sparklan */ + { USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* U-Media*/ + { USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* ZCOM */ + { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Zinwell */ + { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Zyxel */ + { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards"); +MODULE_DEVICE_TABLE(usb, rt2800usb_device_table); +MODULE_FIRMWARE(FIRMWARE_RT2870); +MODULE_LICENSE("GPL"); + +static struct usb_driver rt2800usb_driver = { + .name = KBUILD_MODNAME, + .id_table = rt2800usb_device_table, + .probe = rt2x00usb_probe, + .disconnect = rt2x00usb_disconnect, + .suspend = rt2x00usb_suspend, + .resume = rt2x00usb_resume, +}; + +static int __init rt2800usb_init(void) +{ + return usb_register(&rt2800usb_driver); +} + +static void __exit rt2800usb_exit(void) +{ + usb_deregister(&rt2800usb_driver); +} + +module_init(rt2800usb_init); +module_exit(rt2800usb_exit); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h new file mode 100644 index 000000000000..8e4291d280b3 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.h @@ -0,0 +1,1934 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800usb + Abstract: Data structures and registers for the rt2800usb module. + Supported chipsets: RT2800U. + */ + +#ifndef RT2800USB_H +#define RT2800USB_H + +/* + * RF chip defines. + * + * RF2820 2.4G 2T3R + * RF2850 2.4G/5G 2T3R + * RF2720 2.4G 1T2R + * RF2750 2.4G/5G 1T2R + * RF3020 2.4G 1T1R + * RF2020 2.4G B/G + */ +#define RF2820 0x0001 +#define RF2850 0x0002 +#define RF2720 0x0003 +#define RF2750 0x0004 +#define RF3020 0x0005 +#define RF2020 0x0006 + +/* + * RT2870 version + */ +#define RT2860C_VERSION 0x28600100 +#define RT2860D_VERSION 0x28600101 +#define RT2880E_VERSION 0x28720200 +#define RT2883_VERSION 0x28830300 +#define RT3070_VERSION 0x30700200 + +/* + * Signal information. + * Defaul offset is required for RSSI <-> dBm conversion. + */ +#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x1000 +#define CSR_REG_SIZE 0x0800 +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x0110 +#define BBP_BASE 0x0000 +#define BBP_SIZE 0x0080 +#define RF_BASE 0x0004 +#define RF_SIZE 0x0010 + +/* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 4 + +/* + * USB registers. + */ + +/* + * HOST-MCU shared memory + */ +#define HOST_CMD_CSR 0x0404 +#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) + +/* + * INT_SOURCE_CSR: Interrupt source register. + * Write one to clear corresponding bit. + * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c + */ +#define INT_SOURCE_CSR 0x0200 +#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) +#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) +#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) +#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) +#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) +#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) +#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) +#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) +#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) +#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) +#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) +#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) +#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) +#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) +#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) +#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) +#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) +#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) + +/* + * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. + */ +#define INT_MASK_CSR 0x0204 +#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) +#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) +#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) +#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) +#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) +#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) +#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) +#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) +#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) +#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) +#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) +#define INT_MASK_CSR_TBTT FIELD32(0x00000800) +#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) +#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) +#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) +#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) +#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) +#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) + +/* + * WPDMA_GLO_CFG + */ +#define WPDMA_GLO_CFG 0x0208 +#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) +#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) +#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) +#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) +#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) +#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) +#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) +#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) +#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) + +/* + * WPDMA_RST_IDX + */ +#define WPDMA_RST_IDX 0x020c +#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) +#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) +#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) +#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) +#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) +#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) +#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) + +/* + * DELAY_INT_CFG + */ +#define DELAY_INT_CFG 0x0210 +#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) +#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) +#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) +#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) +#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) +#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) + +/* + * WMM_AIFSN_CFG: Aifsn for each EDCA AC + * AIFSN0: AC_BE + * AIFSN1: AC_BK + * AIFSN1: AC_VI + * AIFSN1: AC_VO + */ +#define WMM_AIFSN_CFG 0x0214 +#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) +#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) +#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) +#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) + +/* + * WMM_CWMIN_CSR: CWmin for each EDCA AC + * CWMIN0: AC_BE + * CWMIN1: AC_BK + * CWMIN1: AC_VI + * CWMIN1: AC_VO + */ +#define WMM_CWMIN_CFG 0x0218 +#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) +#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) +#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) +#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) + +/* + * WMM_CWMAX_CSR: CWmax for each EDCA AC + * CWMAX0: AC_BE + * CWMAX1: AC_BK + * CWMAX1: AC_VI + * CWMAX1: AC_VO + */ +#define WMM_CWMAX_CFG 0x021c +#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) +#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) +#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) +#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) + +/* + * AC_TXOP0: AC_BK/AC_BE TXOP register + * AC0TXOP: AC_BK in unit of 32us + * AC1TXOP: AC_BE in unit of 32us + */ +#define WMM_TXOP0_CFG 0x0220 +#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) +#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) + +/* + * AC_TXOP1: AC_VO/AC_VI TXOP register + * AC2TXOP: AC_VI in unit of 32us + * AC3TXOP: AC_VO in unit of 32us + */ +#define WMM_TXOP1_CFG 0x0224 +#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) +#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) + +/* + * GPIO_CTRL_CFG: + */ +#define GPIO_CTRL_CFG 0x0228 +#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) +#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) +#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) +#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) +#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) +#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) +#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) +#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) +#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) + +/* + * MCU_CMD_CFG + */ +#define MCU_CMD_CFG 0x022c + +/* + * AC_BK register offsets + */ +#define TX_BASE_PTR0 0x0230 +#define TX_MAX_CNT0 0x0234 +#define TX_CTX_IDX0 0x0238 +#define TX_DTX_IDX0 0x023c + +/* + * AC_BE register offsets + */ +#define TX_BASE_PTR1 0x0240 +#define TX_MAX_CNT1 0x0244 +#define TX_CTX_IDX1 0x0248 +#define TX_DTX_IDX1 0x024c + +/* + * AC_VI register offsets + */ +#define TX_BASE_PTR2 0x0250 +#define TX_MAX_CNT2 0x0254 +#define TX_CTX_IDX2 0x0258 +#define TX_DTX_IDX2 0x025c + +/* + * AC_VO register offsets + */ +#define TX_BASE_PTR3 0x0260 +#define TX_MAX_CNT3 0x0264 +#define TX_CTX_IDX3 0x0268 +#define TX_DTX_IDX3 0x026c + +/* + * HCCA register offsets + */ +#define TX_BASE_PTR4 0x0270 +#define TX_MAX_CNT4 0x0274 +#define TX_CTX_IDX4 0x0278 +#define TX_DTX_IDX4 0x027c + +/* + * MGMT register offsets + */ +#define TX_BASE_PTR5 0x0280 +#define TX_MAX_CNT5 0x0284 +#define TX_CTX_IDX5 0x0288 +#define TX_DTX_IDX5 0x028c + +/* + * RX register offsets + */ +#define RX_BASE_PTR 0x0290 +#define RX_MAX_CNT 0x0294 +#define RX_CRX_IDX 0x0298 +#define RX_DRX_IDX 0x029c + +/* + * USB_DMA_CFG + * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. + * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. + * PHY_CLEAR: phy watch dog enable. + * TX_CLEAR: Clear USB DMA TX path. + * TXOP_HALT: Halt TXOP count down when TX buffer is full. + * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation. + * RX_BULK_EN: Enable USB DMA Rx. + * TX_BULK_EN: Enable USB DMA Tx. + * EP_OUT_VALID: OUT endpoint data valid. + * RX_BUSY: USB DMA RX FSM busy. + * TX_BUSY: USB DMA TX FSM busy. + */ +#define USB_DMA_CFG 0x02a0 +#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff) +#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00) +#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000) +#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000) +#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000) +#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000) +#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000) +#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000) +#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000) +#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000) +#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000) + +/* + * USB_CYC_CFG + */ +#define USB_CYC_CFG 0x02a4 +#define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff) + +/* + * PBF_SYS_CTRL + * HOST_RAM_WRITE: enable Host program ram write selection + */ +#define PBF_SYS_CTRL 0x0400 +#define PBF_SYS_CTRL_READY FIELD32(0x00000080) +#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) + +/* + * PBF registers + * Most are for debug. Driver doesn't touch PBF register. + */ +#define PBF_CFG 0x0408 +#define PBF_MAX_PCNT 0x040c +#define PBF_CTRL 0x0410 +#define PBF_INT_STA 0x0414 +#define PBF_INT_ENA 0x0418 + +/* + * BCN_OFFSET0: + */ +#define BCN_OFFSET0 0x042c +#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) +#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) +#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) +#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) + +/* + * BCN_OFFSET1: + */ +#define BCN_OFFSET1 0x0430 +#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) +#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) +#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) +#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) + +/* + * PBF registers + * Most are for debug. Driver doesn't touch PBF register. + */ +#define TXRXQ_PCNT 0x0438 +#define PBF_DBG 0x043c + +/* + * RF registers + */ +#define RF_CSR_CFG 0x0500 +#define RF_CSR_CFG_DATA FIELD32(0x000000ff) +#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) +#define RF_CSR_CFG_WRITE FIELD32(0x00010000) +#define RF_CSR_CFG_BUSY FIELD32(0x00020000) + +/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * MAC_CSR0: ASIC revision number. + * ASIC_REV: 0 + * ASIC_VER: 2870 + */ +#define MAC_CSR0 0x1000 +#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff) +#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000) + +/* + * MAC_SYS_CTRL: + */ +#define MAC_SYS_CTRL 0x1004 +#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) +#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) +#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) +#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) +#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) +#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) +#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) +#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) + +/* + * MAC_ADDR_DW0: STA MAC register 0 + */ +#define MAC_ADDR_DW0 0x1008 +#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) +#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) +#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) +#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) + +/* + * MAC_ADDR_DW1: STA MAC register 1 + * UNICAST_TO_ME_MASK: + * Used to mask off bits from byte 5 of the MAC address + * to determine the UNICAST_TO_ME bit for RX frames. + * The full mask is complemented by BSS_ID_MASK: + * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK + */ +#define MAC_ADDR_DW1 0x100c +#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) +#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) +#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) + +/* + * MAC_BSSID_DW0: BSSID register 0 + */ +#define MAC_BSSID_DW0 0x1010 +#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) +#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) +#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) +#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) + +/* + * MAC_BSSID_DW1: BSSID register 1 + * BSS_ID_MASK: + * 0: 1-BSSID mode (BSS index = 0) + * 1: 2-BSSID mode (BSS index: Byte5, bit 0) + * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) + * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) + * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the + * BSSID. This will make sure that those bits will be ignored + * when determining the MY_BSS of RX frames. + */ +#define MAC_BSSID_DW1 0x1014 +#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) +#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) +#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) +#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) + +/* + * MAX_LEN_CFG: Maximum frame length register. + * MAX_MPDU: rt2860b max 16k bytes + * MAX_PSDU: Maximum PSDU length + * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 + */ +#define MAX_LEN_CFG 0x1018 +#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) +#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) +#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) +#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) + +/* + * BBP_CSR_CFG: BBP serial control register + * VALUE: Register value to program into BBP + * REG_NUM: Selected BBP register + * READ_CONTROL: 0 write BBP, 1 read BBP + * BUSY: ASIC is busy executing BBP commands + * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks + * BBP_RW_MODE: 0 serial, 1 paralell + */ +#define BBP_CSR_CFG 0x101c +#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) +#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) +#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) +#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) +#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) +#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) + +/* + * RF_CSR_CFG0: RF control register + * REGID_AND_VALUE: Register value to program into RF + * BITWIDTH: Selected RF register + * STANDBYMODE: 0 high when standby, 1 low when standby + * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate + * BUSY: ASIC is busy executing RF commands + */ +#define RF_CSR_CFG0 0x1020 +#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) +#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) +#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) +#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) +#define RF_CSR_CFG0_SEL FIELD32(0x40000000) +#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) + +/* + * RF_CSR_CFG1: RF control register + * REGID_AND_VALUE: Register value to program into RF + * RFGAP: Gap between BB_CONTROL_RF and RF_LE + * 0: 3 system clock cycle (37.5usec) + * 1: 5 system clock cycle (62.5usec) + */ +#define RF_CSR_CFG1 0x1024 +#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) +#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) + +/* + * RF_CSR_CFG2: RF control register + * VALUE: Register value to program into RF + * RFGAP: Gap between BB_CONTROL_RF and RF_LE + * 0: 3 system clock cycle (37.5usec) + * 1: 5 system clock cycle (62.5usec) + */ +#define RF_CSR_CFG2 0x1028 +#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) + +/* + * LED_CFG: LED control + * color LED's: + * 0: off + * 1: blinking upon TX2 + * 2: periodic slow blinking + * 3: always on + * LED polarity: + * 0: active low + * 1: active high + */ +#define LED_CFG 0x102c +#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) +#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) +#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) +#define LED_CFG_R_LED_MODE FIELD32(0x03000000) +#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) +#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) +#define LED_CFG_LED_POLAR FIELD32(0x40000000) + +/* + * XIFS_TIME_CFG: MAC timing + * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX + * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX + * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX + * when MAC doesn't reference BBP signal BBRXEND + * EIFS: unit 1us + * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer + * + */ +#define XIFS_TIME_CFG 0x1100 +#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) +#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) +#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) +#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) +#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) + +/* + * BKOFF_SLOT_CFG: + */ +#define BKOFF_SLOT_CFG 0x1104 +#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) +#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) + +/* + * NAV_TIME_CFG: + */ +#define NAV_TIME_CFG 0x1108 +#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) +#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) +#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) +#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) + +/* + * CH_TIME_CFG: count as channel busy + */ +#define CH_TIME_CFG 0x110c + +/* + * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us + */ +#define PBF_LIFE_TIMER 0x1110 + +/* + * BCN_TIME_CFG: + * BEACON_INTERVAL: in unit of 1/16 TU + * TSF_TICKING: Enable TSF auto counting + * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode + * BEACON_GEN: Enable beacon generator + */ +#define BCN_TIME_CFG 0x1114 +#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) +#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) +#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) +#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) +#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) +#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) + +/* + * TBTT_SYNC_CFG: + */ +#define TBTT_SYNC_CFG 0x1118 + +/* + * TSF_TIMER_DW0: Local lsb TSF timer, read-only + */ +#define TSF_TIMER_DW0 0x111c +#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) + +/* + * TSF_TIMER_DW1: Local msb TSF timer, read-only + */ +#define TSF_TIMER_DW1 0x1120 +#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) + +/* + * TBTT_TIMER: TImer remains till next TBTT, read-only + */ +#define TBTT_TIMER 0x1124 + +/* + * INT_TIMER_CFG: + */ +#define INT_TIMER_CFG 0x1128 + +/* + * INT_TIMER_EN: GP-timer and pre-tbtt Int enable + */ +#define INT_TIMER_EN 0x112c + +/* + * CH_IDLE_STA: channel idle time + */ +#define CH_IDLE_STA 0x1130 + +/* + * CH_BUSY_STA: channel busy time + */ +#define CH_BUSY_STA 0x1134 + +/* + * MAC_STATUS_CFG: + * BBP_RF_BUSY: When set to 0, BBP and RF are stable. + * if 1 or higher one of the 2 registers is busy. + */ +#define MAC_STATUS_CFG 0x1200 +#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) + +/* + * PWR_PIN_CFG: + */ +#define PWR_PIN_CFG 0x1204 + +/* + * AUTOWAKEUP_CFG: Manual power control / status register + * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set + * AUTOWAKE: 0:sleep, 1:awake + */ +#define AUTOWAKEUP_CFG 0x1208 +#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) +#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) +#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) + +/* + * EDCA_AC0_CFG: + */ +#define EDCA_AC0_CFG 0x1300 +#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC1_CFG: + */ +#define EDCA_AC1_CFG 0x1304 +#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC2_CFG: + */ +#define EDCA_AC2_CFG 0x1308 +#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC3_CFG: + */ +#define EDCA_AC3_CFG 0x130c +#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_TID_AC_MAP: + */ +#define EDCA_TID_AC_MAP 0x1310 + +/* + * TX_PWR_CFG_0: + */ +#define TX_PWR_CFG_0 0x1314 +#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) +#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) +#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) +#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) +#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) +#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) +#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) +#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_1: + */ +#define TX_PWR_CFG_1 0x1318 +#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) +#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) +#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) +#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) +#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) +#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) +#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) +#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_2: + */ +#define TX_PWR_CFG_2 0x131c +#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) +#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) +#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) +#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) +#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) +#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) +#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) +#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_3: + */ +#define TX_PWR_CFG_3 0x1320 +#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) +#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) +#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) +#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) +#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) +#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) +#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) +#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_4: + */ +#define TX_PWR_CFG_4 0x1324 +#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) +#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) +#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) +#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) + +/* + * TX_PIN_CFG: + */ +#define TX_PIN_CFG 0x1328 +#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) +#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) +#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) +#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) +#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) +#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) +#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) +#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) +#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) +#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) +#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) +#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) +#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) +#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) +#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) +#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) +#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) +#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) +#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) +#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) + +/* + * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz + */ +#define TX_BAND_CFG 0x132c +#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) +#define TX_BAND_CFG_A FIELD32(0x00000002) +#define TX_BAND_CFG_BG FIELD32(0x00000004) + +/* + * TX_SW_CFG0: + */ +#define TX_SW_CFG0 0x1330 + +/* + * TX_SW_CFG1: + */ +#define TX_SW_CFG1 0x1334 + +/* + * TX_SW_CFG2: + */ +#define TX_SW_CFG2 0x1338 + +/* + * TXOP_THRES_CFG: + */ +#define TXOP_THRES_CFG 0x133c + +/* + * TXOP_CTRL_CFG: + */ +#define TXOP_CTRL_CFG 0x1340 + +/* + * TX_RTS_CFG: + * RTS_THRES: unit:byte + * RTS_FBK_EN: enable rts rate fallback + */ +#define TX_RTS_CFG 0x1344 +#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) +#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) +#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) + +/* + * TX_TIMEOUT_CFG: + * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us + * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure + * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. + * it is recommended that: + * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) + */ +#define TX_TIMEOUT_CFG 0x1348 +#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) +#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) +#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) + +/* + * TX_RTY_CFG: + * SHORT_RTY_LIMIT: short retry limit + * LONG_RTY_LIMIT: long retry limit + * LONG_RTY_THRE: Long retry threshoold + * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode + * 0:expired by retry limit, 1: expired by mpdu life timer + * AGG_RTY_MODE: Aggregate MPDU retry mode + * 0:expired by retry limit, 1: expired by mpdu life timer + * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable + */ +#define TX_RTY_CFG 0x134c +#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) +#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) +#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) +#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) +#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) +#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) + +/* + * TX_LINK_CFG: + * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us + * MFB_ENABLE: TX apply remote MFB 1:enable + * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable + * 0: not apply remote remote unsolicit (MFS=7) + * TX_MRQ_EN: MCS request TX enable + * TX_RDG_EN: RDG TX enable + * TX_CF_ACK_EN: Piggyback CF-ACK enable + * REMOTE_MFB: remote MCS feedback + * REMOTE_MFS: remote MCS feedback sequence number + */ +#define TX_LINK_CFG 0x1350 +#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) +#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) +#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) +#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) +#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) +#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) +#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) +#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) + +/* + * HT_FBK_CFG0: + */ +#define HT_FBK_CFG0 0x1354 +#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) +#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) +#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) +#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) +#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) +#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) +#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) +#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) + +/* + * HT_FBK_CFG1: + */ +#define HT_FBK_CFG1 0x1358 +#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) +#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) +#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) +#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) +#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) +#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) +#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) +#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) + +/* + * LG_FBK_CFG0: + */ +#define LG_FBK_CFG0 0x135c +#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) +#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) +#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) +#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) +#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) +#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) +#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) +#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) + +/* + * LG_FBK_CFG1: + */ +#define LG_FBK_CFG1 0x1360 +#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) +#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) +#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) +#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) + +/* + * CCK_PROT_CFG: CCK Protection + * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) + * PROTECT_CTRL: Protection control frame type for CCK TX + * 0:none, 1:RTS/CTS, 2:CTS-to-self + * PROTECT_NAV: TXOP protection type for CCK TX + * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect + * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow + * RTS_TH_EN: RTS threshold enable on CCK TX + */ +#define CCK_PROT_CFG 0x1364 +#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * OFDM_PROT_CFG: OFDM Protection + */ +#define OFDM_PROT_CFG 0x1368 +#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * MM20_PROT_CFG: MM20 Protection + */ +#define MM20_PROT_CFG 0x136c +#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * MM40_PROT_CFG: MM40 Protection + */ +#define MM40_PROT_CFG 0x1370 +#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * GF20_PROT_CFG: GF20 Protection + */ +#define GF20_PROT_CFG 0x1374 +#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * GF40_PROT_CFG: GF40 Protection + */ +#define GF40_PROT_CFG 0x1378 +#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * EXP_CTS_TIME: + */ +#define EXP_CTS_TIME 0x137c + +/* + * EXP_ACK_TIME: + */ +#define EXP_ACK_TIME 0x1380 + +/* + * RX_FILTER_CFG: RX configuration register. + */ +#define RX_FILTER_CFG 0x1400 +#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) +#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) +#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) +#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) +#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) +#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) +#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) +#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) +#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) +#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) +#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) +#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) +#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) +#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) +#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) +#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) +#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) + +/* + * AUTO_RSP_CFG: + * AUTORESPONDER: 0: disable, 1: enable + * BAC_ACK_POLICY: 0:long, 1:short preamble + * CTS_40_MMODE: Response CTS 40MHz duplicate mode + * CTS_40_MREF: Response CTS 40MHz duplicate mode + * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble + * DUAL_CTS_EN: Power bit value in control frame + * ACK_CTS_PSM_BIT:Power bit value in control frame + */ +#define AUTO_RSP_CFG 0x1404 +#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) +#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) +#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) +#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) +#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) +#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) +#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) + +/* + * LEGACY_BASIC_RATE: + */ +#define LEGACY_BASIC_RATE 0x1408 + +/* + * HT_BASIC_RATE: + */ +#define HT_BASIC_RATE 0x140c + +/* + * HT_CTRL_CFG: + */ +#define HT_CTRL_CFG 0x1410 + +/* + * SIFS_COST_CFG: + */ +#define SIFS_COST_CFG 0x1414 + +/* + * RX_PARSER_CFG: + * Set NAV for all received frames + */ +#define RX_PARSER_CFG 0x1418 + +/* + * TX_SEC_CNT0: + */ +#define TX_SEC_CNT0 0x1500 + +/* + * RX_SEC_CNT0: + */ +#define RX_SEC_CNT0 0x1504 + +/* + * CCMP_FC_MUTE: + */ +#define CCMP_FC_MUTE 0x1508 + +/* + * TXOP_HLDR_ADDR0: + */ +#define TXOP_HLDR_ADDR0 0x1600 + +/* + * TXOP_HLDR_ADDR1: + */ +#define TXOP_HLDR_ADDR1 0x1604 + +/* + * TXOP_HLDR_ET: + */ +#define TXOP_HLDR_ET 0x1608 + +/* + * QOS_CFPOLL_RA_DW0: + */ +#define QOS_CFPOLL_RA_DW0 0x160c + +/* + * QOS_CFPOLL_RA_DW1: + */ +#define QOS_CFPOLL_RA_DW1 0x1610 + +/* + * QOS_CFPOLL_QC: + */ +#define QOS_CFPOLL_QC 0x1614 + +/* + * RX_STA_CNT0: RX PLCP error count & RX CRC error count + */ +#define RX_STA_CNT0 0x1700 +#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) +#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) + +/* + * RX_STA_CNT1: RX False CCA count & RX LONG frame count + */ +#define RX_STA_CNT1 0x1704 +#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) +#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) + +/* + * RX_STA_CNT2: + */ +#define RX_STA_CNT2 0x1708 +#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) +#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) + +/* + * TX_STA_CNT0: TX Beacon count + */ +#define TX_STA_CNT0 0x170c +#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) +#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) + +/* + * TX_STA_CNT1: TX tx count + */ +#define TX_STA_CNT1 0x1710 +#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) +#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) + +/* + * TX_STA_CNT2: TX tx count + */ +#define TX_STA_CNT2 0x1714 +#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) +#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) + +/* + * TX_STA_FIFO: TX Result for specific PID status fifo register + */ +#define TX_STA_FIFO 0x1718 +#define TX_STA_FIFO_VALID FIELD32(0x00000001) +#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) +#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) +#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) +#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) +#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) +#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) + +/* + * TX_AGG_CNT: Debug counter + */ +#define TX_AGG_CNT 0x171c +#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT0: + */ +#define TX_AGG_CNT0 0x1720 +#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT1: + */ +#define TX_AGG_CNT1 0x1724 +#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT2: + */ +#define TX_AGG_CNT2 0x1728 +#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT3: + */ +#define TX_AGG_CNT3 0x172c +#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT4: + */ +#define TX_AGG_CNT4 0x1730 +#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT5: + */ +#define TX_AGG_CNT5 0x1734 +#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT6: + */ +#define TX_AGG_CNT6 0x1738 +#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT7: + */ +#define TX_AGG_CNT7 0x173c +#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) + +/* + * MPDU_DENSITY_CNT: + * TX_ZERO_DEL: TX zero length delimiter count + * RX_ZERO_DEL: RX zero length delimiter count + */ +#define MPDU_DENSITY_CNT 0x1740 +#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) +#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) + +/* + * Security key table memory. + * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry + * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry + * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry + * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry + * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry + * SHARED_KEY_MODE_BASE: 4-byte * 16-entry + */ +#define MAC_WCID_BASE 0x1800 +#define PAIRWISE_KEY_TABLE_BASE 0x4000 +#define MAC_IVEIV_TABLE_BASE 0x6000 +#define MAC_WCID_ATTRIBUTE_BASE 0x6800 +#define SHARED_KEY_TABLE_BASE 0x6c00 +#define SHARED_KEY_MODE_BASE 0x7000 + +#define MAC_WCID_ENTRY(__idx) \ + ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define MAC_IVEIV_ENTRY(__idx) \ + ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) +#define MAC_WCID_ATTR_ENTRY(__idx) \ + ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define SHARED_KEY_MODE_ENTRY(__idx) \ + ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) + +struct mac_wcid_entry { + u8 mac[6]; + u8 reserved[2]; +} __attribute__ ((packed)); + +struct hw_key_entry { + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +} __attribute__ ((packed)); + +struct mac_iveiv_entry { + u8 iv[8]; +} __attribute__ ((packed)); + +/* + * MAC_WCID_ATTRIBUTE: + */ +#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) +#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) +#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) +#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) + +/* + * SHARED_KEY_MODE: + */ +#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) +#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) +#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) +#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) +#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) +#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) +#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) +#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) + +/* + * HOST-MCU communication + */ + +/* + * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. + */ +#define H2M_MAILBOX_CSR 0x7010 +#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) +#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) +#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) +#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) + +/* + * H2M_MAILBOX_CID: + */ +#define H2M_MAILBOX_CID 0x7014 + +/* + * H2M_MAILBOX_STATUS: + */ +#define H2M_MAILBOX_STATUS 0x701c + +/* + * H2M_INT_SRC: + */ +#define H2M_INT_SRC 0x7024 + +/* + * H2M_BBP_AGENT: + */ +#define H2M_BBP_AGENT 0x7028 + +/* + * MCU_LEDCS: LED control for MCU Mailbox. + */ +#define MCU_LEDCS_LED_MODE FIELD8(0x1f) +#define MCU_LEDCS_POLARITY FIELD8(0x01) + +/* + * HW_CS_CTS_BASE: + * Carrier-sense CTS frame base address. + * It's where mac stores carrier-sense frame for carrier-sense function. + */ +#define HW_CS_CTS_BASE 0x7700 + +/* + * HW_DFS_CTS_BASE: + * FS CTS frame base address. It's where mac stores CTS frame for DFS. + */ +#define HW_DFS_CTS_BASE 0x7780 + +/* + * TXRX control registers - base address 0x3000 + */ + +/* + * TXRX_CSR1: + * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. + */ +#define TXRX_CSR1 0x77d0 + +/* + * HW_DEBUG_SETTING_BASE: + * since NULL frame won't be that long (256 byte) + * We steal 16 tail bytes to save debugging settings + */ +#define HW_DEBUG_SETTING_BASE 0x77f0 +#define HW_DEBUG_SETTING_BASE2 0x7770 + +/* + * HW_BEACON_BASE + * In order to support maximum 8 MBSS and its maximum length + * is 512 bytes for each beacon + * Three section discontinue memory segments will be used. + * 1. The original region for BCN 0~3 + * 2. Extract memory from FCE table for BCN 4~5 + * 3. Extract memory from Pair-wise key table for BCN 6~7 + * It occupied those memory of wcid 238~253 for BCN 6 + * and wcid 222~237 for BCN 7 + * + * IMPORTANT NOTE: Not sure why legacy driver does this, + * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. + */ +#define HW_BEACON_BASE0 0x7800 +#define HW_BEACON_BASE1 0x7a00 +#define HW_BEACON_BASE2 0x7c00 +#define HW_BEACON_BASE3 0x7e00 +#define HW_BEACON_BASE4 0x7200 +#define HW_BEACON_BASE5 0x7400 +#define HW_BEACON_BASE6 0x5dc0 +#define HW_BEACON_BASE7 0x5bc0 + +#define HW_BEACON_OFFSET(__index) \ + ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \ + (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \ + (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) ) + +/* + * 8051 firmware image. + */ +#define FIRMWARE_RT2870 "rt2870.bin" +#define FIRMWARE_IMAGE_BASE 0x3000 + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * BBP 1: TX Antenna + */ +#define BBP1_TX_POWER FIELD8(0x07) +#define BBP1_TX_ANTENNA FIELD8(0x18) + +/* + * BBP 3: RX Antenna + */ +#define BBP3_RX_ANTENNA FIELD8(0x18) +#define BBP3_HT40_PLUS FIELD8(0x20) + +/* + * BBP 4: Bandwidth + */ +#define BBP4_TX_BF FIELD8(0x01) +#define BBP4_BANDWIDTH FIELD8(0x18) + +/* + * RFCSR registers + * The wordsize of the RFCSR is 8 bits. + */ + +/* + * RFCSR 6: + */ +#define RFCSR6_R FIELD8(0x03) + +/* + * RFCSR 7: + */ +#define RFCSR7_RF_TUNING FIELD8(0x01) + +/* + * RFCSR 12: + */ +#define RFCSR12_TX_POWER FIELD8(0x1f) + +/* + * RFCSR 22: + */ +#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) + +/* + * RFCSR 23: + */ +#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) + +/* + * RFCSR 30: + */ +#define RFCSR30_RF_CALIBRATION FIELD8(0x80) + +/* + * RF registers + */ + +/* + * RF 2 + */ +#define RF2_ANTENNA_RX2 FIELD32(0x00000040) +#define RF2_ANTENNA_TX1 FIELD32(0x00004000) +#define RF2_ANTENNA_RX1 FIELD32(0x00020000) + +/* + * RF 3 + */ +#define RF3_TXPOWER_G FIELD32(0x00003e00) +#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) +#define RF3_TXPOWER_A FIELD32(0x00003c00) + +/* + * RF 4 + */ +#define RF4_TXPOWER_G FIELD32(0x000007c0) +#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) +#define RF4_TXPOWER_A FIELD32(0x00000780) +#define RF4_FREQ_OFFSET FIELD32(0x001f8000) +#define RF4_HT40 FIELD32(0x00200000) + +/* + * EEPROM content. + * The wordsize of the EEPROM is 16 bits. + */ + +/* + * EEPROM Version + */ +#define EEPROM_VERSION 0x0001 +#define EEPROM_VERSION_FAE FIELD16(0x00ff) +#define EEPROM_VERSION_VERSION FIELD16(0xff00) + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_1 0x0003 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0004 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM ANTENNA config + * RXPATH: 1: 1R, 2: 2R, 3: 3R + * TXPATH: 1: 1T, 2: 2T + */ +#define EEPROM_ANTENNA 0x001a +#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) +#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) + +/* + * EEPROM NIC config + * CARDBUS_ACCEL: 0 - enable, 1 - disable + */ +#define EEPROM_NIC 0x001b +#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) +#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) +#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) +#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) +#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) +#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) +#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) +#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) +#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) +#define EEPROM_NIC_BW40M_A FIELD16(0x0200) + +/* + * EEPROM frequency + */ +#define EEPROM_FREQ 0x001d +#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) +#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) +#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) + +/* + * EEPROM LED + * POLARITY_RDY_G: Polarity RDY_G setting. + * POLARITY_RDY_A: Polarity RDY_A setting. + * POLARITY_ACT: Polarity ACT setting. + * POLARITY_GPIO_0: Polarity GPIO0 setting. + * POLARITY_GPIO_1: Polarity GPIO1 setting. + * POLARITY_GPIO_2: Polarity GPIO2 setting. + * POLARITY_GPIO_3: Polarity GPIO3 setting. + * POLARITY_GPIO_4: Polarity GPIO4 setting. + * LED_MODE: Led mode. + */ +#define EEPROM_LED1 0x001e +#define EEPROM_LED2 0x001f +#define EEPROM_LED3 0x0020 +#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) +#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) +#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) +#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) +#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) +#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) +#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) +#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) +#define EEPROM_LED_LED_MODE FIELD16(0x1f00) + +/* + * EEPROM LNA + */ +#define EEPROM_LNA 0x0022 +#define EEPROM_LNA_BG FIELD16(0x00ff) +#define EEPROM_LNA_A0 FIELD16(0xff00) + +/* + * EEPROM RSSI BG offset + */ +#define EEPROM_RSSI_BG 0x0023 +#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) +#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) + +/* + * EEPROM RSSI BG2 offset + */ +#define EEPROM_RSSI_BG2 0x0024 +#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) +#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) + +/* + * EEPROM RSSI A offset + */ +#define EEPROM_RSSI_A 0x0025 +#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) +#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) + +/* + * EEPROM RSSI A2 offset + */ +#define EEPROM_RSSI_A2 0x0026 +#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) +#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) + +/* + * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. + * This is delta in 40MHZ. + * VALUE: Tx Power dalta value (MAX=4) + * TYPE: 1: Plus the delta value, 0: minus the delta value + * TXPOWER: Enable: + */ +#define EEPROM_TXPOWER_DELTA 0x0028 +#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) +#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) +#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) + +/* + * EEPROM TXPOWER 802.11BG + */ +#define EEPROM_TXPOWER_BG1 0x0029 +#define EEPROM_TXPOWER_BG2 0x0030 +#define EEPROM_TXPOWER_BG_SIZE 7 +#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) + +/* + * EEPROM TXPOWER 802.11A + */ +#define EEPROM_TXPOWER_A1 0x003c +#define EEPROM_TXPOWER_A2 0x0053 +#define EEPROM_TXPOWER_A_SIZE 6 +#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) + +/* + * EEPROM TXpower byrate: 20MHZ power + */ +#define EEPROM_TXPOWER_BYRATE 0x006f + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x0078 +#define EEPROM_BBP_SIZE 16 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * MCU mailbox commands. + */ +#define MCU_SLEEP 0x30 +#define MCU_WAKEUP 0x31 +#define MCU_RADIO_OFF 0x35 +#define MCU_LED 0x50 +#define MCU_LED_STRENGTH 0x51 +#define MCU_LED_1 0x52 +#define MCU_LED_2 0x53 +#define MCU_LED_3 0x54 +#define MCU_RADAR 0x60 +#define MCU_BOOT_SIGNAL 0x72 +#define MCU_BBP_SIGNAL 0x80 + +/* + * DMA descriptor defines. + */ +#define TXD_DESC_SIZE ( 4 * sizeof(__le32) ) +#define TXINFO_DESC_SIZE ( 1 * sizeof(__le32) ) +#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) ) +#define RXD_DESC_SIZE ( 1 * sizeof(__le32) ) +#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) ) + +/* + * TX descriptor format for TX, PRIO and Beacon Ring. + */ + +/* + * Word0 + */ +#define TXD_W0_SD_PTR0 FIELD32(0xffffffff) + +/* + * Word1 + */ +#define TXD_W1_SD_LEN1 FIELD32(0x00003fff) +#define TXD_W1_LAST_SEC1 FIELD32(0x00004000) +#define TXD_W1_BURST FIELD32(0x00008000) +#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000) +#define TXD_W1_LAST_SEC0 FIELD32(0x40000000) +#define TXD_W1_DMA_DONE FIELD32(0x80000000) + +/* + * Word2 + */ +#define TXD_W2_SD_PTR1 FIELD32(0xffffffff) + +/* + * Word3 + * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI + * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. + * 0:MGMT, 1:HCCA 2:EDCA + */ +#define TXD_W3_WIV FIELD32(0x01000000) +#define TXD_W3_QSEL FIELD32(0x06000000) +#define TXD_W3_TCO FIELD32(0x20000000) +#define TXD_W3_UCO FIELD32(0x40000000) +#define TXD_W3_ICO FIELD32(0x80000000) + +/* + * TX Info structure + */ + +/* + * Word0 + * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI + * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. + * 0:MGMT, 1:HCCA 2:EDCA + * USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid + * DMA_TX_BURST: used ONLY in USB bulk Aggregation. + * Force USB DMA transmit frame from current selected endpoint + */ +#define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff) +#define TXINFO_W0_WIV FIELD32(0x01000000) +#define TXINFO_W0_QSEL FIELD32(0x06000000) +#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000) +#define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000) +#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000) + +/* + * TX WI structure + */ + +/* + * Word0 + * FRAG: 1 To inform TKIP engine this is a fragment. + * MIMO_PS: The remote peer is in dynamic MIMO-PS mode + * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs + * BW: Channel bandwidth 20MHz or 40 MHz + * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED + */ +#define TXWI_W0_FRAG FIELD32(0x00000001) +#define TXWI_W0_MIMO_PS FIELD32(0x00000002) +#define TXWI_W0_CF_ACK FIELD32(0x00000004) +#define TXWI_W0_TS FIELD32(0x00000008) +#define TXWI_W0_AMPDU FIELD32(0x00000010) +#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) +#define TXWI_W0_TX_OP FIELD32(0x00000300) +#define TXWI_W0_MCS FIELD32(0x007f0000) +#define TXWI_W0_BW FIELD32(0x00800000) +#define TXWI_W0_SHORT_GI FIELD32(0x01000000) +#define TXWI_W0_STBC FIELD32(0x06000000) +#define TXWI_W0_IFS FIELD32(0x08000000) +#define TXWI_W0_PHYMODE FIELD32(0xc0000000) + +/* + * Word1 + */ +#define TXWI_W1_ACK FIELD32(0x00000001) +#define TXWI_W1_NSEQ FIELD32(0x00000002) +#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) +#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) +#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) +#define TXWI_W1_PACKETID FIELD32(0xf0000000) + +/* + * Word2 + */ +#define TXWI_W2_IV FIELD32(0xffffffff) + +/* + * Word3 + */ +#define TXWI_W3_EIV FIELD32(0xffffffff) + +/* + * RX descriptor format for RX Ring. + */ + +/* + * Word0 + * UNICAST_TO_ME: This RX frame is unicast to me. + * MULTICAST: This is a multicast frame. + * BROADCAST: This is a broadcast frame. + * MY_BSS: this frame belongs to the same BSSID. + * CRC_ERROR: CRC error. + * CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid. + * AMSDU: rx with 802.3 header, not 802.11 header. + */ + +#define RXD_W0_BA FIELD32(0x00000001) +#define RXD_W0_DATA FIELD32(0x00000002) +#define RXD_W0_NULLDATA FIELD32(0x00000004) +#define RXD_W0_FRAG FIELD32(0x00000008) +#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010) +#define RXD_W0_MULTICAST FIELD32(0x00000020) +#define RXD_W0_BROADCAST FIELD32(0x00000040) +#define RXD_W0_MY_BSS FIELD32(0x00000080) +#define RXD_W0_CRC_ERROR FIELD32(0x00000100) +#define RXD_W0_CIPHER_ERROR FIELD32(0x00000600) +#define RXD_W0_AMSDU FIELD32(0x00000800) +#define RXD_W0_HTC FIELD32(0x00001000) +#define RXD_W0_RSSI FIELD32(0x00002000) +#define RXD_W0_L2PAD FIELD32(0x00004000) +#define RXD_W0_AMPDU FIELD32(0x00008000) +#define RXD_W0_DECRYPTED FIELD32(0x00010000) +#define RXD_W0_PLCP_RSSI FIELD32(0x00020000) +#define RXD_W0_CIPHER_ALG FIELD32(0x00040000) +#define RXD_W0_LAST_AMSDU FIELD32(0x00080000) +#define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000) + +/* + * RX WI structure + */ + +/* + * Word0 + */ +#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) +#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) +#define RXWI_W0_BSSID FIELD32(0x00001c00) +#define RXWI_W0_UDF FIELD32(0x0000e000) +#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) +#define RXWI_W0_TID FIELD32(0xf0000000) + +/* + * Word1 + */ +#define RXWI_W1_FRAG FIELD32(0x0000000f) +#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) +#define RXWI_W1_MCS FIELD32(0x007f0000) +#define RXWI_W1_BW FIELD32(0x00800000) +#define RXWI_W1_SHORT_GI FIELD32(0x01000000) +#define RXWI_W1_STBC FIELD32(0x06000000) +#define RXWI_W1_PHYMODE FIELD32(0xc0000000) + +/* + * Word2 + */ +#define RXWI_W2_RSSI0 FIELD32(0x000000ff) +#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) +#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) + +/* + * Word3 + */ +#define RXWI_W3_SNR0 FIELD32(0x000000ff) +#define RXWI_W3_SNR1 FIELD32(0x0000ff00) + +/* + * Macro's for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. + */ +#define MIN_G_TXPOWER 0 +#define MIN_A_TXPOWER -7 +#define MAX_G_TXPOWER 31 +#define MAX_A_TXPOWER 15 +#define DEFAULT_TXPOWER 5 + +#define TXPOWER_G_FROM_DEV(__txpower) \ + ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_G_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) + +#define TXPOWER_A_FROM_DEV(__txpower) \ + ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_A_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) + +#endif /* RT2800USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index ebe5f276679b..8d933ee30583 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -147,6 +147,7 @@ struct rt2x00_chip { #define RT2561 0x0302 #define RT2661 0x0401 #define RT2571 0x1300 +#define RT2870 0x1600 u16 rf; u32 rev; From 2f01a1f58889fbfeb68b1bc1b52e4197f3333490 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Wed, 29 Apr 2009 23:33:31 +0300 Subject: [PATCH 37/68] wl12xx: add driver wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/Makefile | 2 + drivers/net/wireless/wl12xx/Kconfig | 11 + drivers/net/wireless/wl12xx/Makefile | 4 + drivers/net/wireless/wl12xx/acx.c | 689 ++++++++++ drivers/net/wireless/wl12xx/acx.h | 1245 ++++++++++++++++++ drivers/net/wireless/wl12xx/boot.c | 295 +++++ drivers/net/wireless/wl12xx/boot.h | 40 + drivers/net/wireless/wl12xx/cmd.c | 353 +++++ drivers/net/wireless/wl12xx/cmd.h | 265 ++++ drivers/net/wireless/wl12xx/debugfs.c | 508 ++++++++ drivers/net/wireless/wl12xx/debugfs.h | 33 + drivers/net/wireless/wl12xx/event.c | 127 ++ drivers/net/wireless/wl12xx/event.h | 121 ++ drivers/net/wireless/wl12xx/init.c | 200 +++ drivers/net/wireless/wl12xx/init.h | 40 + drivers/net/wireless/wl12xx/main.c | 1358 ++++++++++++++++++++ drivers/net/wireless/wl12xx/ps.c | 151 +++ drivers/net/wireless/wl12xx/ps.h | 36 + drivers/net/wireless/wl12xx/reg.h | 745 +++++++++++ drivers/net/wireless/wl12xx/rx.c | 208 +++ drivers/net/wireless/wl12xx/rx.h | 122 ++ drivers/net/wireless/wl12xx/spi.c | 358 ++++++ drivers/net/wireless/wl12xx/spi.h | 109 ++ drivers/net/wireless/wl12xx/tx.c | 557 ++++++++ drivers/net/wireless/wl12xx/tx.h | 215 ++++ drivers/net/wireless/wl12xx/wl1251.c | 709 ++++++++++ drivers/net/wireless/wl12xx/wl1251.h | 165 +++ drivers/net/wireless/wl12xx/wl12xx.h | 409 ++++++ drivers/net/wireless/wl12xx/wl12xx_80211.h | 156 +++ include/linux/spi/wl12xx.h | 31 + 31 files changed, 9263 insertions(+) create mode 100644 drivers/net/wireless/wl12xx/Kconfig create mode 100644 drivers/net/wireless/wl12xx/Makefile create mode 100644 drivers/net/wireless/wl12xx/acx.c create mode 100644 drivers/net/wireless/wl12xx/acx.h create mode 100644 drivers/net/wireless/wl12xx/boot.c create mode 100644 drivers/net/wireless/wl12xx/boot.h create mode 100644 drivers/net/wireless/wl12xx/cmd.c create mode 100644 drivers/net/wireless/wl12xx/cmd.h create mode 100644 drivers/net/wireless/wl12xx/debugfs.c create mode 100644 drivers/net/wireless/wl12xx/debugfs.h create mode 100644 drivers/net/wireless/wl12xx/event.c create mode 100644 drivers/net/wireless/wl12xx/event.h create mode 100644 drivers/net/wireless/wl12xx/init.c create mode 100644 drivers/net/wireless/wl12xx/init.h create mode 100644 drivers/net/wireless/wl12xx/main.c create mode 100644 drivers/net/wireless/wl12xx/ps.c create mode 100644 drivers/net/wireless/wl12xx/ps.h create mode 100644 drivers/net/wireless/wl12xx/reg.h create mode 100644 drivers/net/wireless/wl12xx/rx.c create mode 100644 drivers/net/wireless/wl12xx/rx.h create mode 100644 drivers/net/wireless/wl12xx/spi.c create mode 100644 drivers/net/wireless/wl12xx/spi.h create mode 100644 drivers/net/wireless/wl12xx/tx.c create mode 100644 drivers/net/wireless/wl12xx/tx.h create mode 100644 drivers/net/wireless/wl12xx/wl1251.c create mode 100644 drivers/net/wireless/wl12xx/wl1251.h create mode 100644 drivers/net/wireless/wl12xx/wl12xx.h create mode 100644 drivers/net/wireless/wl12xx/wl12xx_80211.h create mode 100644 include/linux/spi/wl12xx.h diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 2d8434f409b6..91be3e7bf133 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -500,5 +500,6 @@ source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" source "drivers/net/wireless/rt2x00/Kconfig" source "drivers/net/wireless/orinoco/Kconfig" +source "drivers/net/wireless/wl12xx/Kconfig" endmenu diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 0625e91b5995..f2b1861e6bcb 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -58,3 +58,5 @@ obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH_COMMON) += ath/ obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o + +obj-$(CONFIG_WL12XX) += wl12xx/ diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig new file mode 100644 index 000000000000..20a9633569f2 --- /dev/null +++ b/drivers/net/wireless/wl12xx/Kconfig @@ -0,0 +1,11 @@ +config WL12XX + tristate "TI wl1251/wl1271 support" + depends on MAC80211 && WLAN_80211 && SPI_MASTER && EXPERIMENTAL + select FW_LOADER + select CRC7 + ---help--- + This module adds support for wireless adapters based on + TI wl1251/wl1271 chipsets. + + If you choose to build a module, it'll be called wl12xx. Say N if + unsure. diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile new file mode 100644 index 000000000000..d43de27dc54c --- /dev/null +++ b/drivers/net/wireless/wl12xx/Makefile @@ -0,0 +1,4 @@ +wl12xx-objs = main.o spi.o event.o tx.o rx.o \ + ps.o cmd.o acx.o boot.o init.o wl1251.o \ + debugfs.o +obj-$(CONFIG_WL12XX) += wl12xx.o diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c new file mode 100644 index 000000000000..1cfd458ad5ab --- /dev/null +++ b/drivers/net/wireless/wl12xx/acx.c @@ -0,0 +1,689 @@ +#include "acx.h" + +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "reg.h" +#include "spi.h" +#include "ps.h" + +int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod, + u8 mgt_rate, u8 mgt_mod) +{ + int ret; + struct acx_fw_gen_frame_rates rates; + + wl12xx_debug(DEBUG_ACX, "acx frame rates"); + + rates.header.id = ACX_FW_GEN_FRAME_RATES; + rates.header.len = sizeof(struct acx_fw_gen_frame_rates) - + sizeof(struct acx_header); + + rates.tx_ctrl_frame_rate = ctrl_rate; + rates.tx_ctrl_frame_mod = ctrl_mod; + rates.tx_mgt_frame_rate = mgt_rate; + rates.tx_mgt_frame_mod = mgt_mod; + + ret = wl12xx_cmd_configure(wl, &rates, sizeof(rates)); + if (ret < 0) { + wl12xx_error("Failed to set FW rates and modulation"); + return ret; + } + + return 0; +} + + +int wl12xx_acx_station_id(struct wl12xx *wl) +{ + int ret, i; + struct dot11_station_id mac; + + wl12xx_debug(DEBUG_ACX, "acx dot11_station_id"); + + mac.header.id = DOT11_STATION_ID; + mac.header.len = sizeof(mac) - sizeof(struct acx_header); + + for (i = 0; i < ETH_ALEN; i++) + mac.mac[i] = wl->mac_addr[ETH_ALEN - 1 - i]; + + ret = wl12xx_cmd_configure(wl, &mac, sizeof(mac)); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id) +{ + struct acx_dot11_default_key default_key; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id); + + default_key.header.id = DOT11_DEFAULT_KEY; + default_key.header.len = sizeof(default_key) - + sizeof(struct acx_header); + + default_key.id = key_id; + + ret = wl12xx_cmd_configure(wl, &default_key, sizeof(default_key)); + if (ret < 0) { + wl12xx_error("Couldnt set default key"); + return ret; + } + + wl->default_key = key_id; + + return 0; +} + +int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval) +{ + struct acx_wake_up_condition wake_up; + + wl12xx_debug(DEBUG_ACX, "acx wake up conditions"); + + wake_up.header.id = ACX_WAKE_UP_CONDITIONS; + wake_up.header.len = sizeof(wake_up) - sizeof(struct acx_header); + + wake_up.wake_up_event = WAKE_UP_EVENT_DTIM_BITMAP; + wake_up.listen_interval = listen_interval; + + return wl12xx_cmd_configure(wl, &wake_up, sizeof(wake_up)); +} + +int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth) +{ + int ret; + struct acx_sleep_auth auth; + + wl12xx_debug(DEBUG_ACX, "acx sleep auth"); + + auth.header.id = ACX_SLEEP_AUTH; + auth.header.len = sizeof(auth) - sizeof(struct acx_header); + + auth.sleep_auth = sleep_auth; + + ret = wl12xx_cmd_configure(wl, &auth, sizeof(auth)); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len) +{ + struct wl12xx_command cmd; + struct acx_revision *rev; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx fw rev"); + + memset(&cmd, 0, sizeof(cmd)); + + ret = wl12xx_cmd_interrogate(wl, ACX_FW_REV, sizeof(*rev), &cmd); + if (ret < 0) { + wl12xx_warning("ACX_FW_REV interrogate failed"); + return ret; + } + + rev = (struct acx_revision *) &cmd.parameters; + + /* be careful with the buffer sizes */ + strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version))); + + /* + * if the firmware version string is exactly + * sizeof(rev->fw_version) long or fw_len is less than + * sizeof(rev->fw_version) it won't be null terminated + */ + buf[min(len, sizeof(rev->fw_version)) - 1] = '\0'; + + return 0; +} + +int wl12xx_acx_tx_power(struct wl12xx *wl, int power) +{ + struct acx_current_tx_power ie; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr"); + + if (power < 0 || power > 25) + return -EINVAL; + + memset(&ie, 0, sizeof(ie)); + + ie.header.id = DOT11_CUR_TX_PWR; + ie.header.len = sizeof(ie) - sizeof(struct acx_header); + ie.current_tx_power = power * 10; + + ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie)); + if (ret < 0) { + wl12xx_warning("configure of tx power failed: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_feature_cfg(struct wl12xx *wl) +{ + struct acx_feature_config feature; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx feature cfg"); + + memset(&feature, 0, sizeof(feature)); + + feature.header.id = ACX_FEATURE_CFG; + feature.header.len = sizeof(feature) - sizeof(struct acx_header); + + /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */ + feature.data_flow_options = 0; + feature.options = 0; + + ret = wl12xx_cmd_configure(wl, &feature, sizeof(feature)); + if (ret < 0) + wl12xx_error("Couldnt set HW encryption"); + + return ret; +} + +int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len) +{ + struct wl12xx_command cmd; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx mem map"); + + ret = wl12xx_cmd_interrogate(wl, ACX_MEM_MAP, len, &cmd); + if (ret < 0) + return ret; + else if (cmd.status != CMD_STATUS_SUCCESS) + return -EIO; + + memcpy(mem_map, &cmd.parameters, len); + + return 0; +} + +int wl12xx_acx_data_path_params(struct wl12xx *wl, + struct acx_data_path_params_resp *data_path) +{ + struct acx_data_path_params params; + struct wl12xx_command cmd; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx data path params"); + + params.rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE; + params.tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE; + + params.rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM; + params.tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM; + + params.tx_complete_threshold = 1; + + params.tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE; + + params.tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT; + + params.header.id = ACX_DATA_PATH_PARAMS; + params.header.len = sizeof(params) - sizeof(struct acx_header); + + ret = wl12xx_cmd_configure(wl, ¶ms, sizeof(params)); + if (ret < 0) + return ret; + + + ret = wl12xx_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS, + sizeof(struct acx_data_path_params_resp), + &cmd); + + if (ret < 0) { + wl12xx_warning("failed to read data path parameters: %d", ret); + return ret; + } else if (cmd.status != CMD_STATUS_SUCCESS) { + wl12xx_warning("data path parameter acx status failed"); + return -EIO; + } + + memcpy(data_path, &cmd.parameters, sizeof(*data_path)); + + return 0; +} + +int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time) +{ + struct rx_msdu_lifetime msdu_lifetime; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx rx msdu life time"); + + msdu_lifetime.header.id = DOT11_RX_MSDU_LIFE_TIME; + msdu_lifetime.header.len = sizeof(msdu_lifetime) - + sizeof(struct acx_header); + msdu_lifetime.lifetime = life_time; + + ret = wl12xx_cmd_configure(wl, &msdu_lifetime, sizeof(msdu_lifetime)); + if (ret < 0) { + wl12xx_warning("failed to set rx msdu life time: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter) +{ + struct acx_rx_config rx_config; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx rx config"); + + rx_config.header.id = ACX_RX_CFG; + rx_config.header.len = sizeof(rx_config) - sizeof(struct acx_header); + rx_config.config_options = config; + rx_config.filter_options = filter; + + ret = wl12xx_cmd_configure(wl, &rx_config, sizeof(rx_config)); + if (ret < 0) { + wl12xx_warning("failed to set rx config: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_pd_threshold(struct wl12xx *wl) +{ + struct acx_packet_detection packet_detection; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx data pd threshold"); + + /* FIXME: threshold value not set */ + packet_detection.header.id = ACX_PD_THRESHOLD; + packet_detection.header.len = sizeof(packet_detection) - + sizeof(struct acx_header); + + ret = wl12xx_cmd_configure(wl, &packet_detection, + sizeof(packet_detection)); + if (ret < 0) { + wl12xx_warning("failed to set pd threshold: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time) +{ + struct acx_slot slot; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx slot"); + + slot.header.id = ACX_SLOT; + slot.header.len = sizeof(slot) - sizeof(struct acx_header); + + slot.wone_index = STATION_WONE_INDEX; + slot.slot_time = slot_time; + + ret = wl12xx_cmd_configure(wl, &slot, sizeof(slot)); + if (ret < 0) { + wl12xx_warning("failed to set slot time: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_group_address_tbl(struct wl12xx *wl) +{ + struct multicast_grp_addr_start multicast; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx group address tbl"); + + /* MAC filtering */ + multicast.header.id = DOT11_GROUP_ADDRESS_TBL; + multicast.header.len = sizeof(multicast) - sizeof(struct acx_header); + + multicast.enabled = 0; + multicast.num_groups = 0; + memset(multicast.mac_table, 0, ADDRESS_GROUP_MAX_LEN); + + ret = wl12xx_cmd_configure(wl, &multicast, sizeof(multicast)); + if (ret < 0) { + wl12xx_warning("failed to set group addr table: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_service_period_timeout(struct wl12xx *wl) +{ + struct acx_rx_timeout rx_timeout; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx service period timeout"); + + /* RX timeout */ + rx_timeout.header.id = ACX_SERVICE_PERIOD_TIMEOUT; + rx_timeout.header.len = sizeof(rx_timeout) - sizeof(struct acx_header); + + rx_timeout.ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF; + rx_timeout.upsd_timeout = RX_TIMEOUT_UPSD_DEF; + + ret = wl12xx_cmd_configure(wl, &rx_timeout, sizeof(rx_timeout)); + if (ret < 0) { + wl12xx_warning("failed to set service period timeout: %d", + ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold) +{ + struct acx_rts_threshold rts; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx rts threshold"); + + rts.header.id = DOT11_RTS_THRESHOLD; + rts.header.len = sizeof(rts) - sizeof(struct acx_header); + + rts.threshold = rts_threshold; + + ret = wl12xx_cmd_configure(wl, &rts, sizeof(rts)); + if (ret < 0) { + wl12xx_warning("failed to set rts threshold: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl) +{ + struct acx_beacon_filter_option beacon_filter; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx beacon filter opt"); + + beacon_filter.header.id = ACX_BEACON_FILTER_OPT; + beacon_filter.header.len = sizeof(beacon_filter) - + sizeof(struct acx_header); + + beacon_filter.enable = 0; + beacon_filter.max_num_beacons = 0; + + ret = wl12xx_cmd_configure(wl, &beacon_filter, sizeof(beacon_filter)); + if (ret < 0) { + wl12xx_warning("failed to set beacon filter opt: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_beacon_filter_table(struct wl12xx *wl) +{ + struct acx_beacon_filter_ie_table ie_table; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx beacon filter table"); + + ie_table.header.id = ACX_BEACON_FILTER_TABLE; + ie_table.header.len = sizeof(ie_table) - sizeof(struct acx_header); + + ie_table.num_ie = 0; + memset(ie_table.table, 0, BEACON_FILTER_TABLE_MAX_SIZE); + + ret = wl12xx_cmd_configure(wl, &ie_table, sizeof(ie_table)); + if (ret < 0) { + wl12xx_warning("failed to set beacon filter table: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_sg_enable(struct wl12xx *wl) +{ + struct acx_bt_wlan_coex pta; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx sg enable"); + + pta.header.id = ACX_SG_ENABLE; + pta.header.len = sizeof(pta) - sizeof(struct acx_header); + + pta.enable = SG_ENABLE; + + ret = wl12xx_cmd_configure(wl, &pta, sizeof(pta)); + if (ret < 0) { + wl12xx_warning("failed to set softgemini enable: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_sg_cfg(struct wl12xx *wl) +{ + struct acx_bt_wlan_coex_param param; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx sg cfg"); + + /* BT-WLAN coext parameters */ + param.header.id = ACX_SG_CFG; + param.header.len = sizeof(param) - sizeof(struct acx_header); + + param.min_rate = RATE_INDEX_24MBPS; + param.bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF; + param.wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF; + param.sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF; + param.rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF; + param.tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF; + param.rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF; + param.tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF; + param.wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF; + param.bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF; + param.next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF; + param.wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF; + param.hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF; + param.next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF; + param.antenna_type = PTA_ANTENNA_TYPE_DEF; + param.signal_type = PTA_SIGNALING_TYPE_DEF; + param.afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF; + param.quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF; + param.max_cts = PTA_MAX_NUM_CTS_DEF; + param.wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF; + param.bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF; + param.missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF; + param.wlan_elp_hp = PTA_ELP_HP_DEF; + param.bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF; + param.ack_mode_dual_ant = PTA_ACK_MODE_DEF; + param.pa_sd_enable = PTA_ALLOW_PA_SD_DEF; + param.pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF; + param.bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF; + + ret = wl12xx_cmd_configure(wl, ¶m, sizeof(param)); + if (ret < 0) { + wl12xx_warning("failed to set sg config: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_cca_threshold(struct wl12xx *wl) +{ + struct acx_energy_detection detection; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx cca threshold"); + + detection.header.id = ACX_CCA_THRESHOLD; + detection.header.len = sizeof(detection) - sizeof(struct acx_header); + + detection.rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D; + detection.tx_energy_detection = 0; + + ret = wl12xx_cmd_configure(wl, &detection, sizeof(detection)); + if (ret < 0) { + wl12xx_warning("failed to set cca threshold: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl) +{ + struct acx_beacon_broadcast bb; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx bcn dtim options"); + + bb.header.id = ACX_BCN_DTIM_OPTIONS; + bb.header.len = sizeof(bb) - sizeof(struct acx_header); + + bb.beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE; + bb.broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE; + bb.rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE; + bb.ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF; + + ret = wl12xx_cmd_configure(wl, &bb, sizeof(bb)); + if (ret < 0) { + wl12xx_warning("failed to set rx config: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_aid(struct wl12xx *wl, u16 aid) +{ + struct acx_aid acx_aid; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx aid"); + + acx_aid.header.id = ACX_AID; + acx_aid.header.len = sizeof(acx_aid) - sizeof(struct acx_header); + + acx_aid.aid = aid; + + ret = wl12xx_cmd_configure(wl, &acx_aid, sizeof(acx_aid)); + if (ret < 0) { + wl12xx_warning("failed to set aid: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask) +{ + struct acx_event_mask mask; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx event mbox mask"); + + mask.header.id = ACX_EVENT_MBOX_MASK; + mask.header.len = sizeof(mask) - sizeof(struct acx_header); + + /* high event mask is unused */ + mask.high_event_mask = 0xffffffff; + + mask.event_mask = event_mask; + + ret = wl12xx_cmd_configure(wl, &mask, sizeof(mask)); + if (ret < 0) { + wl12xx_warning("failed to set aid: %d", ret); + return ret; + } + + return 0; +} + +int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble) +{ + struct acx_preamble ie; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx_set_preamble"); + + memset(&ie, 0, sizeof(ie)); + + ie.header.id = ACX_PREAMBLE_TYPE; + ie.header.len = sizeof(ie) - sizeof(struct acx_header); + ie.preamble = preamble; + ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie)); + if (ret < 0) { + wl12xx_warning("Setting of preamble failed: %d", ret); + return ret; + } + return 0; +} + +int wl12xx_acx_cts_protect(struct wl12xx *wl, + enum acx_ctsprotect_type ctsprotect) +{ + struct acx_ctsprotect ie; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx_set_ctsprotect"); + + memset(&ie, 0, sizeof(ie)); + + ie.header.id = ACX_CTS_PROTECTION; + ie.header.len = sizeof(ie) - sizeof(struct acx_header); + ie.ctsprotect = ctsprotect; + ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie)); + if (ret < 0) { + wl12xx_warning("Setting of ctsprotect failed: %d", ret); + return ret; + } + return 0; +} + +int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats) +{ + struct wl12xx_command *answer; + int ret; + + wl12xx_debug(DEBUG_ACX, "acx statistics"); + + answer = kmalloc(sizeof(*answer), GFP_KERNEL); + if (!answer) { + wl12xx_warning("could not allocate memory for acx statistics"); + ret = -ENOMEM; + goto out; + } + + ret = wl12xx_cmd_interrogate(wl, ACX_STATISTICS, sizeof(*answer), + answer); + if (ret < 0) { + wl12xx_warning("acx statistics failed: %d", ret); + goto out; + } + + memcpy(stats, answer->parameters, sizeof(*stats)); + +out: + kfree(answer); + return ret; +} diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h new file mode 100644 index 000000000000..fb2d2340993c --- /dev/null +++ b/drivers/net/wireless/wl12xx/acx.h @@ -0,0 +1,1245 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_ACX_H__ +#define __WL12XX_ACX_H__ + +#include "wl12xx.h" + +/* Target's information element */ +struct acx_header { + u16 id; + u16 len; +}; + +struct acx_error_counter { + struct acx_header header; + + /* The number of PLCP errors since the last time this */ + /* information element was interrogated. This field is */ + /* automatically cleared when it is interrogated.*/ + u32 PLCP_error; + + /* The number of FCS errors since the last time this */ + /* information element was interrogated. This field is */ + /* automatically cleared when it is interrogated.*/ + u32 FCS_error; + + /* The number of MPDUs without PLCP header errors received*/ + /* since the last time this information element was interrogated. */ + /* This field is automatically cleared when it is interrogated.*/ + u32 valid_frame; + + /* the number of missed sequence numbers in the squentially */ + /* values of frames seq numbers */ + u32 seq_num_miss; +} __attribute__ ((packed)); + +struct acx_revision { + struct acx_header header; + + /* + * The WiLink firmware version, an ASCII string x.x.x.x, + * that uniquely identifies the current firmware. + * The left most digit is incremented each time a + * significant change is made to the firmware, such as + * code redesign or new platform support. + * The second digit is incremented when major enhancements + * are added or major fixes are made. + * The third digit is incremented for each GA release. + * The fourth digit is incremented for each build. + * The first two digits identify a firmware release version, + * in other words, a unique set of features. + * The first three digits identify a GA release. + */ + char fw_version[20]; + + /* + * This 4 byte field specifies the WiLink hardware version. + * bits 0 - 15: Reserved. + * bits 16 - 23: Version ID - The WiLink version ID + * (1 = first spin, 2 = second spin, and so on). + * bits 24 - 31: Chip ID - The WiLink chip ID. + */ + u32 hw_version; +} __attribute__ ((packed)); + +enum wl12xx_psm_mode { + /* Active mode */ + WL12XX_PSM_CAM = 0, + + /* Power save mode */ + WL12XX_PSM_PS = 1, + + /* Extreme low power */ + WL12XX_PSM_ELP = 2, +}; + +struct acx_sleep_auth { + struct acx_header header; + + /* The sleep level authorization of the device. */ + /* 0 - Always active*/ + /* 1 - Power down mode: light / fast sleep*/ + /* 2 - ELP mode: Deep / Max sleep*/ + u8 sleep_auth; + u8 padding[3]; +} __attribute__ ((packed)); + +#define TIM_ELE_ID 5 +#define PARTIAL_VBM_MAX 251 + +struct tim { + u8 identity; + u8 length; + u8 dtim_count; + u8 dtim_period; + u8 bitmap_ctrl; + u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */ +} __attribute__ ((packed)); + +/* Virtual Bit Map update */ +struct vbm_update_request { + __le16 len; + u8 padding[2]; + struct tim tim; +} __attribute__ ((packed)); + +enum { + HOSTIF_PCI_MASTER_HOST_INDIRECT, + HOSTIF_PCI_MASTER_HOST_DIRECT, + HOSTIF_SLAVE, + HOSTIF_PKT_RING, + HOSTIF_DONTCARE = 0xFF +}; + +#define DEFAULT_UCAST_PRIORITY 0 +#define DEFAULT_RX_Q_PRIORITY 0 +#define DEFAULT_NUM_STATIONS 1 +#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */ +#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */ +#define TRACE_BUFFER_MAX_SIZE 256 + +#define DP_RX_PACKET_RING_CHUNK_SIZE 1600 +#define DP_TX_PACKET_RING_CHUNK_SIZE 1600 +#define DP_RX_PACKET_RING_CHUNK_NUM 2 +#define DP_TX_PACKET_RING_CHUNK_NUM 2 +#define DP_TX_COMPLETE_TIME_OUT 20 +#define FW_TX_CMPLT_BLOCK_SIZE 16 + +struct acx_data_path_params { + struct acx_header header; + + u16 rx_packet_ring_chunk_size; + u16 tx_packet_ring_chunk_size; + + u8 rx_packet_ring_chunk_num; + u8 tx_packet_ring_chunk_num; + + /* + * Maximum number of packets that can be gathered + * in the TX complete ring before an interrupt + * is generated. + */ + u8 tx_complete_threshold; + + /* Number of pending TX complete entries in cyclic ring.*/ + u8 tx_complete_ring_depth; + + /* + * Max num microseconds since a packet enters the TX + * complete ring until an interrupt is generated. + */ + u32 tx_complete_timeout; +} __attribute__ ((packed)); + + +struct acx_data_path_params_resp { + struct acx_header header; + + u16 rx_packet_ring_chunk_size; + u16 tx_packet_ring_chunk_size; + + u8 rx_packet_ring_chunk_num; + u8 tx_packet_ring_chunk_num; + + u8 pad[2]; + + u32 rx_packet_ring_addr; + u32 tx_packet_ring_addr; + + u32 rx_control_addr; + u32 tx_control_addr; + + u32 tx_complete_addr; +} __attribute__ ((packed)); + +#define TX_MSDU_LIFETIME_MIN 0 +#define TX_MSDU_LIFETIME_MAX 3000 +#define TX_MSDU_LIFETIME_DEF 512 +#define RX_MSDU_LIFETIME_MIN 0 +#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF +#define RX_MSDU_LIFETIME_DEF 512000 + +struct rx_msdu_lifetime { + struct acx_header header; + + /* + * The maximum amount of time, in TU, before the + * firmware discards the MSDU. + */ + u32 lifetime; +} __attribute__ ((packed)); + +/* + * RX Config Options Table + * Bit Definition + * === ========== + * 31:14 Reserved + * 13 Copy RX Status - when set, write three receive status words + * to top of rx'd MPDUs. + * When cleared, do not write three status words (added rev 1.5) + * 12 Reserved + * 11 RX Complete upon FCS error - when set, give rx complete + * interrupt for FCS errors, after the rx filtering, e.g. unicast + * frames not to us with FCS error will not generate an interrupt. + * 10 SSID Filter Enable - When set, the WiLink discards all beacon, + * probe request, and probe response frames with an SSID that does + * not match the SSID specified by the host in the START/JOIN + * command. + * When clear, the WiLink receives frames with any SSID. + * 9 Broadcast Filter Enable - When set, the WiLink discards all + * broadcast frames. When clear, the WiLink receives all received + * broadcast frames. + * 8:6 Reserved + * 5 BSSID Filter Enable - When set, the WiLink discards any frames + * with a BSSID that does not match the BSSID specified by the + * host. + * When clear, the WiLink receives frames from any BSSID. + * 4 MAC Addr Filter - When set, the WiLink discards any frames + * with a destination address that does not match the MAC address + * of the adaptor. + * When clear, the WiLink receives frames destined to any MAC + * address. + * 3 Promiscuous - When set, the WiLink receives all valid frames + * (i.e., all frames that pass the FCS check). + * When clear, only frames that pass the other filters specified + * are received. + * 2 FCS - When set, the WiLink includes the FCS with the received + * frame. + * When cleared, the FCS is discarded. + * 1 PLCP header - When set, write all data from baseband to frame + * buffer including PHY header. + * 0 Reserved - Always equal to 0. + * + * RX Filter Options Table + * Bit Definition + * === ========== + * 31:12 Reserved - Always equal to 0. + * 11 Association - When set, the WiLink receives all association + * related frames (association request/response, reassocation + * request/response, and disassociation). When clear, these frames + * are discarded. + * 10 Auth/De auth - When set, the WiLink receives all authentication + * and de-authentication frames. When clear, these frames are + * discarded. + * 9 Beacon - When set, the WiLink receives all beacon frames. + * When clear, these frames are discarded. + * 8 Contention Free - When set, the WiLink receives all contention + * free frames. + * When clear, these frames are discarded. + * 7 Control - When set, the WiLink receives all control frames. + * When clear, these frames are discarded. + * 6 Data - When set, the WiLink receives all data frames. + * When clear, these frames are discarded. + * 5 FCS Error - When set, the WiLink receives frames that have FCS + * errors. + * When clear, these frames are discarded. + * 4 Management - When set, the WiLink receives all management + * frames. + * When clear, these frames are discarded. + * 3 Probe Request - When set, the WiLink receives all probe request + * frames. + * When clear, these frames are discarded. + * 2 Probe Response - When set, the WiLink receives all probe + * response frames. + * When clear, these frames are discarded. + * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK + * frames. + * When clear, these frames are discarded. + * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames + * that have reserved frame types and sub types as defined by the + * 802.11 specification. + * When clear, these frames are discarded. + */ +struct acx_rx_config { + struct acx_header header; + + u32 config_options; + u32 filter_options; +} __attribute__ ((packed)); + +enum { + QOS_AC_BE = 0, + QOS_AC_BK, + QOS_AC_VI, + QOS_AC_VO, + QOS_HIGHEST_AC_INDEX = QOS_AC_VO, +}; + +#define MAX_NUM_OF_AC (QOS_HIGHEST_AC_INDEX+1) +#define FIRST_AC_INDEX QOS_AC_BE +#define MAX_NUM_OF_802_1d_TAGS 8 +#define AC_PARAMS_MAX_TSID 15 +#define MAX_APSD_CONF 0xffff + +#define QOS_TX_HIGH_MIN (0) +#define QOS_TX_HIGH_MAX (100) + +#define QOS_TX_HIGH_BK_DEF (25) +#define QOS_TX_HIGH_BE_DEF (35) +#define QOS_TX_HIGH_VI_DEF (35) +#define QOS_TX_HIGH_VO_DEF (35) + +#define QOS_TX_LOW_BK_DEF (15) +#define QOS_TX_LOW_BE_DEF (25) +#define QOS_TX_LOW_VI_DEF (25) +#define QOS_TX_LOW_VO_DEF (25) + +struct acx_tx_queue_qos_config { + struct acx_header header; + + u8 qid; + u8 pad[3]; + + /* Max number of blocks allowd in the queue */ + u16 high_threshold; + + /* Lowest memory blocks guaranteed for this queue */ + u16 low_threshold; +} __attribute__ ((packed)); + +struct acx_packet_detection { + struct acx_header header; + + u32 threshold; +} __attribute__ ((packed)); + + +enum acx_slot_type { + SLOT_TIME_LONG = 0, + SLOT_TIME_SHORT = 1, + DEFAULT_SLOT_TIME = SLOT_TIME_SHORT, + MAX_SLOT_TIMES = 0xFF +}; + +#define STATION_WONE_INDEX 0 + +struct acx_slot { + struct acx_header header; + + u8 wone_index; /* Reserved */ + u8 slot_time; + u8 reserved[6]; +} __attribute__ ((packed)); + + +#define ADDRESS_GROUP_MAX (8) +#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ADDRESS_GROUP_MAX) + +struct multicast_grp_addr_start { + struct acx_header header; + + u8 enabled; + u8 num_groups; + u8 pad[2]; + u8 mac_table[ADDRESS_GROUP_MAX_LEN]; +} __attribute__ ((packed)); + + +#define RX_TIMEOUT_PS_POLL_MIN 0 +#define RX_TIMEOUT_PS_POLL_MAX (200000) +#define RX_TIMEOUT_PS_POLL_DEF (15) +#define RX_TIMEOUT_UPSD_MIN 0 +#define RX_TIMEOUT_UPSD_MAX (200000) +#define RX_TIMEOUT_UPSD_DEF (15) + +struct acx_rx_timeout { + struct acx_header header; + + /* + * The longest time the STA will wait to receive + * traffic from the AP after a PS-poll has been + * transmitted. + */ + u16 ps_poll_timeout; + + /* + * The longest time the STA will wait to receive + * traffic from the AP after a frame has been sent + * from an UPSD enabled queue. + */ + u16 upsd_timeout; +} __attribute__ ((packed)); + +#define RTS_THRESHOLD_MIN 0 +#define RTS_THRESHOLD_MAX 4096 +#define RTS_THRESHOLD_DEF 2347 + +struct acx_rts_threshold { + struct acx_header header; + + u16 threshold; + u8 pad[2]; +} __attribute__ ((packed)); + +struct acx_beacon_filter_option { + struct acx_header header; + + u8 enable; + + /* + * The number of beacons without the unicast TIM + * bit set that the firmware buffers before + * signaling the host about ready frames. + * When set to 0 and the filter is enabled, beacons + * without the unicast TIM bit set are dropped. + */ + u8 max_num_beacons; + u8 pad[2]; +} __attribute__ ((packed)); + +/* + * ACXBeaconFilterEntry (not 221) + * Byte Offset Size (Bytes) Definition + * =========== ============ ========== + * 0 1 IE identifier + * 1 1 Treatment bit mask + * + * ACXBeaconFilterEntry (221) + * Byte Offset Size (Bytes) Definition + * =========== ============ ========== + * 0 1 IE identifier + * 1 1 Treatment bit mask + * 2 3 OUI + * 5 1 Type + * 6 2 Version + * + * + * Treatment bit mask - The information element handling: + * bit 0 - The information element is compared and transferred + * in case of change. + * bit 1 - The information element is transferred to the host + * with each appearance or disappearance. + * Note that both bits can be set at the same time. + */ +#define BEACON_FILTER_TABLE_MAX_IE_NUM (32) +#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6) +#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2) +#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6) +#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \ + BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \ + (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \ + BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE)) + +struct acx_beacon_filter_ie_table { + struct acx_header header; + + u8 num_ie; + u8 table[BEACON_FILTER_TABLE_MAX_SIZE]; + u8 pad[3]; +} __attribute__ ((packed)); + +enum { + SG_ENABLE = 0, + SG_DISABLE, + SG_SENSE_NO_ACTIVITY, + SG_SENSE_ACTIVE +}; + +struct acx_bt_wlan_coex { + struct acx_header header; + + /* + * 0 -> PTA enabled + * 1 -> PTA disabled + * 2 -> sense no active mode, i.e. + * an interrupt is sent upon + * BT activity. + * 3 -> PTA is switched on in response + * to the interrupt sending. + */ + u8 enable; + u8 pad[3]; +} __attribute__ ((packed)); + +#define PTA_ANTENNA_TYPE_DEF (0) +#define PTA_BT_HP_MAXTIME_DEF (2000) +#define PTA_WLAN_HP_MAX_TIME_DEF (5000) +#define PTA_SENSE_DISABLE_TIMER_DEF (1350) +#define PTA_PROTECTIVE_RX_TIME_DEF (1500) +#define PTA_PROTECTIVE_TX_TIME_DEF (1500) +#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000) +#define PTA_SIGNALING_TYPE_DEF (1) +#define PTA_AFH_LEVERAGE_ON_DEF (0) +#define PTA_NUMBER_QUIET_CYCLE_DEF (0) +#define PTA_MAX_NUM_CTS_DEF (3) +#define PTA_NUMBER_OF_WLAN_PACKETS_DEF (2) +#define PTA_NUMBER_OF_BT_PACKETS_DEF (2) +#define PTA_PROTECTIVE_RX_TIME_FAST_DEF (1500) +#define PTA_PROTECTIVE_TX_TIME_FAST_DEF (3000) +#define PTA_CYCLE_TIME_FAST_DEF (8700) +#define PTA_RX_FOR_AVALANCHE_DEF (5) +#define PTA_ELP_HP_DEF (0) +#define PTA_ANTI_STARVE_PERIOD_DEF (500) +#define PTA_ANTI_STARVE_NUM_CYCLE_DEF (4) +#define PTA_ALLOW_PA_SD_DEF (1) +#define PTA_TIME_BEFORE_BEACON_DEF (6300) +#define PTA_HPDM_MAX_TIME_DEF (1600) +#define PTA_TIME_OUT_NEXT_WLAN_DEF (2550) +#define PTA_AUTO_MODE_NO_CTS_DEF (0) +#define PTA_BT_HP_RESPECTED_DEF (3) +#define PTA_WLAN_RX_MIN_RATE_DEF (24) +#define PTA_ACK_MODE_DEF (1) + +struct acx_bt_wlan_coex_param { + struct acx_header header; + + /* + * The minimum rate of a received WLAN packet in the STA, + * during protective mode, of which a new BT-HP request + * during this Rx will always be respected and gain the antenna. + */ + u32 min_rate; + + /* Max time the BT HP will be respected. */ + u16 bt_hp_max_time; + + /* Max time the WLAN HP will be respected. */ + u16 wlan_hp_max_time; + + /* + * The time between the last BT activity + * and the moment when the sense mode returns + * to SENSE_INACTIVE. + */ + u16 sense_disable_timer; + + /* Time before the next BT HP instance */ + u16 rx_time_bt_hp; + u16 tx_time_bt_hp; + + /* range: 10-20000 default: 1500 */ + u16 rx_time_bt_hp_fast; + u16 tx_time_bt_hp_fast; + + /* range: 2000-65535 default: 8700 */ + u16 wlan_cycle_fast; + + /* range: 0 - 15000 (Msec) default: 1000 */ + u16 bt_anti_starvation_period; + + /* range 400-10000(Usec) default: 3000 */ + u16 next_bt_lp_packet; + + /* Deafult: worst case for BT DH5 traffic */ + u16 wake_up_beacon; + + /* range: 0-50000(Usec) default: 1050 */ + u16 hp_dm_max_guard_time; + + /* + * This is to prevent both BT & WLAN antenna + * starvation. + * Range: 100-50000(Usec) default:2550 + */ + u16 next_wlan_packet; + + /* 0 -> shared antenna */ + u8 antenna_type; + + /* + * 0 -> TI legacy + * 1 -> Palau + */ + u8 signal_type; + + /* + * BT AFH status + * 0 -> no AFH + * 1 -> from dedicated GPIO + * 2 -> AFH on (from host) + */ + u8 afh_leverage_on; + + /* + * The number of cycles during which no + * TX will be sent after 1 cycle of RX + * transaction in protective mode + */ + u8 quiet_cycle_num; + + /* + * The maximum number of CTSs that will + * be sent for receiving RX packet in + * protective mode + */ + u8 max_cts; + + /* + * The number of WLAN packets + * transferred in common mode before + * switching to BT. + */ + u8 wlan_packets_num; + + /* + * The number of BT packets + * transferred in common mode before + * switching to WLAN. + */ + u8 bt_packets_num; + + /* range: 1-255 default: 5 */ + u8 missed_rx_avalanche; + + /* range: 0-1 default: 1 */ + u8 wlan_elp_hp; + + /* range: 0 - 15 default: 4 */ + u8 bt_anti_starvation_cycles; + + u8 ack_mode_dual_ant; + + /* + * Allow PA_SD assertion/de-assertion + * during enabled BT activity. + */ + u8 pa_sd_enable; + + /* + * Enable/Disable PTA in auto mode: + * Support Both Active & P.S modes + */ + u8 pta_auto_mode_enable; + + /* range: 0 - 20 default: 1 */ + u8 bt_hp_respected_num; +} __attribute__ ((packed)); + +#define CCA_THRSH_ENABLE_ENERGY_D 0x140A +#define CCA_THRSH_DISABLE_ENERGY_D 0xFFEF + +struct acx_energy_detection { + struct acx_header header; + + /* The RX Clear Channel Assessment threshold in the PHY */ + u16 rx_cca_threshold; + u8 tx_energy_detection; + u8 pad; +} __attribute__ ((packed)); + +#define BCN_RX_TIMEOUT_DEF_VALUE 10000 +#define BROADCAST_RX_TIMEOUT_DEF_VALUE 20000 +#define RX_BROADCAST_IN_PS_DEF_VALUE 1 +#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4 + +struct acx_beacon_broadcast { + struct acx_header header; + + u16 beacon_rx_timeout; + u16 broadcast_timeout; + + /* Enables receiving of broadcast packets in PS mode */ + u8 rx_broadcast_in_ps; + + /* Consecutive PS Poll failures before updating the host */ + u8 ps_poll_threshold; + u8 pad[2]; +} __attribute__ ((packed)); + +struct acx_event_mask { + struct acx_header header; + + u32 event_mask; + u32 high_event_mask; /* Unused */ +} __attribute__ ((packed)); + +#define CFG_RX_FCS BIT(2) +#define CFG_RX_ALL_GOOD BIT(3) +#define CFG_UNI_FILTER_EN BIT(4) +#define CFG_BSSID_FILTER_EN BIT(5) +#define CFG_MC_FILTER_EN BIT(6) +#define CFG_MC_ADDR0_EN BIT(7) +#define CFG_MC_ADDR1_EN BIT(8) +#define CFG_BC_REJECT_EN BIT(9) +#define CFG_SSID_FILTER_EN BIT(10) +#define CFG_RX_INT_FCS_ERROR BIT(11) +#define CFG_RX_INT_ENCRYPTED BIT(12) +#define CFG_RX_WR_RX_STATUS BIT(13) +#define CFG_RX_FILTER_NULTI BIT(14) +#define CFG_RX_RESERVE BIT(15) +#define CFG_RX_TIMESTAMP_TSF BIT(16) + +#define CFG_RX_RSV_EN BIT(0) +#define CFG_RX_RCTS_ACK BIT(1) +#define CFG_RX_PRSP_EN BIT(2) +#define CFG_RX_PREQ_EN BIT(3) +#define CFG_RX_MGMT_EN BIT(4) +#define CFG_RX_FCS_ERROR BIT(5) +#define CFG_RX_DATA_EN BIT(6) +#define CFG_RX_CTL_EN BIT(7) +#define CFG_RX_CF_EN BIT(8) +#define CFG_RX_BCN_EN BIT(9) +#define CFG_RX_AUTH_EN BIT(10) +#define CFG_RX_ASSOC_EN BIT(11) + +#define SCAN_PASSIVE BIT(0) +#define SCAN_5GHZ_BAND BIT(1) +#define SCAN_TRIGGERED BIT(2) +#define SCAN_PRIORITY_HIGH BIT(3) + +struct acx_fw_gen_frame_rates { + struct acx_header header; + + u8 tx_ctrl_frame_rate; /* RATE_* */ + u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */ + u8 tx_mgt_frame_rate; + u8 tx_mgt_frame_mod; +} __attribute__ ((packed)); + +/* STA MAC */ +struct dot11_station_id { + struct acx_header header; + + u8 mac[ETH_ALEN]; + u8 pad[2]; +} __attribute__ ((packed)); + +/* HW encryption keys */ +#define NUM_ACCESS_CATEGORIES_COPY 4 +#define MAX_KEY_SIZE 32 + +/* When set, disable HW encryption */ +#define DF_ENCRYPTION_DISABLE 0x01 +/* When set, disable HW decryption */ +#define DF_SNIFF_MODE_ENABLE 0x80 + +struct acx_feature_config { + struct acx_header header; + + u32 options; + u32 data_flow_options; +} __attribute__ ((packed)); + +enum acx_key_action { + KEY_ADD_OR_REPLACE = 1, + KEY_REMOVE = 2, + KEY_SET_ID = 3, + MAX_KEY_ACTION = 0xffff, +}; + +enum acx_key_type { + KEY_WEP_DEFAULT = 0, + KEY_WEP_ADDR = 1, + KEY_AES_GROUP = 4, + KEY_AES_PAIRWISE = 5, + KEY_WEP_GROUP = 6, + KEY_TKIP_MIC_GROUP = 10, + KEY_TKIP_MIC_PAIRWISE = 11, +}; + +/* + * + * key_type_e key size key format + * ---------- --------- ---------- + * 0x00 5, 13, 29 Key data + * 0x01 5, 13, 29 Key data + * 0x04 16 16 bytes of key data + * 0x05 16 16 bytes of key data + * 0x0a 32 16 bytes of TKIP key data + * 8 bytes of RX MIC key data + * 8 bytes of TX MIC key data + * 0x0b 32 16 bytes of TKIP key data + * 8 bytes of RX MIC key data + * 8 bytes of TX MIC key data + * + */ + +struct acx_set_key { + /* Ignored for default WEP key */ + u8 addr[ETH_ALEN]; + + /* key_action_e */ + u16 key_action; + + u16 reserved_1; + + /* key size in bytes */ + u8 key_size; + + /* key_type_e */ + u8 key_type; + u8 ssid_profile; + + /* + * TKIP, AES: frame's key id field. + * For WEP default key: key id; + */ + u8 id; + u8 reserved_2[6]; + u8 key[MAX_KEY_SIZE]; + u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY]; + u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY]; +} __attribute__ ((packed)); + +struct acx_current_tx_power { + struct acx_header header; + + u8 current_tx_power; + u8 padding[3]; +} __attribute__ ((packed)); + +struct acx_dot11_default_key { + struct acx_header header; + + u8 id; + u8 pad[3]; +} __attribute__ ((packed)); + +struct acx_tsf_info { + struct acx_header header; + + u32 current_tsf_msb; + u32 current_tsf_lsb; + u32 last_TBTT_msb; + u32 last_TBTT_lsb; + u8 last_dtim_count; + u8 pad[3]; +} __attribute__ ((packed)); + +/* 802.11 PS */ +enum acx_ps_mode { + STATION_ACTIVE_MODE, + STATION_POWER_SAVE_MODE +}; + +struct acx_ps_params { + u8 ps_mode; /* STATION_* */ + u8 send_null_data; /* Do we have to send NULL data packet ? */ + u8 retries; /* Number of retires for the initial NULL data packet */ + + /* + * TUs during which the target stays awake after switching + * to power save mode. + */ + u8 hang_over_period; + u16 null_data_rate; + u8 pad[2]; +} __attribute__ ((packed)); + +enum acx_wake_up_event { + WAKE_UP_EVENT_BEACON_BITMAP = 0x01, /* Wake on every Beacon*/ + WAKE_UP_EVENT_DTIM_BITMAP = 0x02, /* Wake on every DTIM*/ + WAKE_UP_EVENT_N_DTIM_BITMAP = 0x04, /* Wake on every Nth DTIM */ + WAKE_UP_EVENT_N_BEACONS_BITMAP = 0x08, /* Wake on every Nth Beacon */ + WAKE_UP_EVENT_BITS_MASK = 0x0F +}; + +struct acx_wake_up_condition { + struct acx_header header; + + u8 wake_up_event; /* Only one bit can be set */ + u8 listen_interval; + u8 pad[2]; +} __attribute__ ((packed)); + +struct acx_aid { + struct acx_header header; + + /* + * To be set when associated with an AP. + */ + u16 aid; + u8 pad[2]; +} __attribute__ ((packed)); + +enum acx_preamble_type { + ACX_PREAMBLE_LONG = 0, + ACX_PREAMBLE_SHORT = 1 +}; + +struct acx_preamble { + struct acx_header header; + /* + * When set, the WiLink transmits the frames with a short preamble and + * when cleared, the WiLink transmits the frames with a long preamble. + */ + u8 preamble; + u8 padding[3]; +} __attribute__ ((packed)); + +enum acx_ctsprotect_type { + CTSPROTECT_DISABLE = 0, + CTSPROTECT_ENABLE = 1 +}; + +struct acx_ctsprotect { + struct acx_header header; + u8 ctsprotect; + u8 padding[3]; +} __attribute__ ((packed)); + +struct acx_tx_statistics { + u32 internal_desc_overflow; +} __attribute__ ((packed)); + +struct acx_rx_statistics { + u32 out_of_mem; + u32 hdr_overflow; + u32 hw_stuck; + u32 dropped; + u32 fcs_err; + u32 xfr_hint_trig; + u32 path_reset; + u32 reset_counter; +} __attribute__ ((packed)); + +struct acx_dma_statistics { + u32 rx_requested; + u32 rx_errors; + u32 tx_requested; + u32 tx_errors; +} __attribute__ ((packed)); + +struct acx_isr_statistics { + /* host command complete */ + u32 cmd_cmplt; + + /* fiqisr() */ + u32 fiqs; + + /* (INT_STS_ND & INT_TRIG_RX_HEADER) */ + u32 rx_headers; + + /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */ + u32 rx_completes; + + /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */ + u32 rx_mem_overflow; + + /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */ + u32 rx_rdys; + + /* irqisr() */ + u32 irqs; + + /* (INT_STS_ND & INT_TRIG_TX_PROC) */ + u32 tx_procs; + + /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */ + u32 decrypt_done; + + /* (INT_STS_ND & INT_TRIG_DMA0) */ + u32 dma0_done; + + /* (INT_STS_ND & INT_TRIG_DMA1) */ + u32 dma1_done; + + /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */ + u32 tx_exch_complete; + + /* (INT_STS_ND & INT_TRIG_COMMAND) */ + u32 commands; + + /* (INT_STS_ND & INT_TRIG_RX_PROC) */ + u32 rx_procs; + + /* (INT_STS_ND & INT_TRIG_PM_802) */ + u32 hw_pm_mode_changes; + + /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */ + u32 host_acknowledges; + + /* (INT_STS_ND & INT_TRIG_PM_PCI) */ + u32 pci_pm; + + /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */ + u32 wakeups; + + /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */ + u32 low_rssi; +} __attribute__ ((packed)); + +struct acx_wep_statistics { + /* WEP address keys configured */ + u32 addr_key_count; + + /* default keys configured */ + u32 default_key_count; + + u32 reserved; + + /* number of times that WEP key not found on lookup */ + u32 key_not_found; + + /* number of times that WEP key decryption failed */ + u32 decrypt_fail; + + /* WEP packets decrypted */ + u32 packets; + + /* WEP decrypt interrupts */ + u32 interrupt; +} __attribute__ ((packed)); + +#define ACX_MISSED_BEACONS_SPREAD 10 + +struct acx_pwr_statistics { + /* the amount of enters into power save mode (both PD & ELP) */ + u32 ps_enter; + + /* the amount of enters into ELP mode */ + u32 elp_enter; + + /* the amount of missing beacon interrupts to the host */ + u32 missing_bcns; + + /* the amount of wake on host-access times */ + u32 wake_on_host; + + /* the amount of wake on timer-expire */ + u32 wake_on_timer_exp; + + /* the number of packets that were transmitted with PS bit set */ + u32 tx_with_ps; + + /* the number of packets that were transmitted with PS bit clear */ + u32 tx_without_ps; + + /* the number of received beacons */ + u32 rcvd_beacons; + + /* the number of entering into PowerOn (power save off) */ + u32 power_save_off; + + /* the number of entries into power save mode */ + u16 enable_ps; + + /* + * the number of exits from power save, not including failed PS + * transitions + */ + u16 disable_ps; + + /* + * the number of times the TSF counter was adjusted because + * of drift + */ + u32 fix_tsf_ps; + + /* Gives statistics about the spread continuous missed beacons. + * The 16 LSB are dedicated for the PS mode. + * The 16 MSB are dedicated for the PS mode. + * cont_miss_bcns_spread[0] - single missed beacon. + * cont_miss_bcns_spread[1] - two continuous missed beacons. + * cont_miss_bcns_spread[2] - three continuous missed beacons. + * ... + * cont_miss_bcns_spread[9] - ten and more continuous missed beacons. + */ + u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD]; + + /* the number of beacons in awake mode */ + u32 rcvd_awake_beacons; +} __attribute__ ((packed)); + +struct acx_mic_statistics { + u32 rx_pkts; + u32 calc_failure; +} __attribute__ ((packed)); + +struct acx_aes_statistics { + u32 encrypt_fail; + u32 decrypt_fail; + u32 encrypt_packets; + u32 decrypt_packets; + u32 encrypt_interrupt; + u32 decrypt_interrupt; +} __attribute__ ((packed)); + +struct acx_event_statistics { + u32 heart_beat; + u32 calibration; + u32 rx_mismatch; + u32 rx_mem_empty; + u32 rx_pool; + u32 oom_late; + u32 phy_transmit_error; + u32 tx_stuck; +} __attribute__ ((packed)); + +struct acx_ps_statistics { + u32 pspoll_timeouts; + u32 upsd_timeouts; + u32 upsd_max_sptime; + u32 upsd_max_apturn; + u32 pspoll_max_apturn; + u32 pspoll_utilization; + u32 upsd_utilization; +} __attribute__ ((packed)); + +struct acx_rxpipe_statistics { + u32 rx_prep_beacon_drop; + u32 descr_host_int_trig_rx_data; + u32 beacon_buffer_thres_host_int_trig_rx_data; + u32 missed_beacon_host_int_trig_rx_data; + u32 tx_xfr_host_int_trig_rx_data; +} __attribute__ ((packed)); + +struct acx_statistics { + struct acx_header header; + + struct acx_tx_statistics tx; + struct acx_rx_statistics rx; + struct acx_dma_statistics dma; + struct acx_isr_statistics isr; + struct acx_wep_statistics wep; + struct acx_pwr_statistics pwr; + struct acx_aes_statistics aes; + struct acx_mic_statistics mic; + struct acx_event_statistics event; + struct acx_ps_statistics ps; + struct acx_rxpipe_statistics rxpipe; +} __attribute__ ((packed)); + +enum { + ACX_WAKE_UP_CONDITIONS = 0x0002, + ACX_MEM_CFG = 0x0003, + ACX_SLOT = 0x0004, + ACX_QUEUE_HEAD = 0x0005, /* for MASTER mode only */ + ACX_AC_CFG = 0x0007, + ACX_MEM_MAP = 0x0008, + ACX_AID = 0x000A, + ACX_RADIO_PARAM = 0x000B, /* Not used */ + ACX_CFG = 0x000C, /* Not used */ + ACX_FW_REV = 0x000D, + ACX_MEDIUM_USAGE = 0x000F, + ACX_RX_CFG = 0x0010, + ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */ + ACX_BSS_IN_PS = 0x0012, /* for AP only */ + ACX_STATISTICS = 0x0013, /* Debug API */ + ACX_FEATURE_CFG = 0x0015, + ACX_MISC_CFG = 0x0017, /* Not used */ + ACX_TID_CFG = 0x001A, + ACX_BEACON_FILTER_OPT = 0x001F, + ACX_LOW_RSSI = 0x0020, + ACX_NOISE_HIST = 0x0021, + ACX_HDK_VERSION = 0x0022, /* ??? */ + ACX_PD_THRESHOLD = 0x0023, + ACX_DATA_PATH_PARAMS = 0x0024, /* WO */ + ACX_DATA_PATH_RESP_PARAMS = 0x0024, /* RO */ + ACX_CCA_THRESHOLD = 0x0025, + ACX_EVENT_MBOX_MASK = 0x0026, +#ifdef FW_RUNNING_AS_AP + ACX_DTIM_PERIOD = 0x0027, /* for AP only */ +#else + ACX_WR_TBTT_AND_DTIM = 0x0027, /* STA only */ +#endif + ACX_ACI_OPTION_CFG = 0x0029, /* OBSOLETE (for 1251)*/ + ACX_GPIO_CFG = 0x002A, /* Not used */ + ACX_GPIO_SET = 0x002B, /* Not used */ + ACX_PM_CFG = 0x002C, /* To Be Documented */ + ACX_CONN_MONIT_PARAMS = 0x002D, + ACX_AVERAGE_RSSI = 0x002E, /* Not used */ + ACX_CONS_TX_FAILURE = 0x002F, + ACX_BCN_DTIM_OPTIONS = 0x0031, + ACX_SG_ENABLE = 0x0032, + ACX_SG_CFG = 0x0033, + ACX_ANTENNA_DIVERSITY_CFG = 0x0035, /* To Be Documented */ + ACX_LOW_SNR = 0x0037, /* To Be Documented */ + ACX_BEACON_FILTER_TABLE = 0x0038, + ACX_ARP_IP_FILTER = 0x0039, + ACX_ROAMING_STATISTICS_TBL = 0x003B, + ACX_RATE_POLICY = 0x003D, + ACX_CTS_PROTECTION = 0x003E, + ACX_SLEEP_AUTH = 0x003F, + ACX_PREAMBLE_TYPE = 0x0040, + ACX_ERROR_CNT = 0x0041, + ACX_FW_GEN_FRAME_RATES = 0x0042, + ACX_IBSS_FILTER = 0x0044, + ACX_SERVICE_PERIOD_TIMEOUT = 0x0045, + ACX_TSF_INFO = 0x0046, + ACX_CONFIG_PS_WMM = 0x0049, + ACX_ENABLE_RX_DATA_FILTER = 0x004A, + ACX_SET_RX_DATA_FILTER = 0x004B, + ACX_GET_DATA_FILTER_STATISTICS = 0x004C, + ACX_POWER_LEVEL_TABLE = 0x004D, + ACX_BET_ENABLE = 0x0050, + DOT11_STATION_ID = 0x1001, + DOT11_RX_MSDU_LIFE_TIME = 0x1004, + DOT11_CUR_TX_PWR = 0x100D, + DOT11_DEFAULT_KEY = 0x1010, + DOT11_RX_DOT11_MODE = 0x1012, + DOT11_RTS_THRESHOLD = 0x1013, + DOT11_GROUP_ADDRESS_TBL = 0x1014, + + MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL, + + MAX_IE = 0xFFFF +}; + + +int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod, + u8 mgt_rate, u8 mgt_mod); +int wl12xx_acx_station_id(struct wl12xx *wl); +int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id); +int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval); +int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth); +int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len); +int wl12xx_acx_tx_power(struct wl12xx *wl, int power); +int wl12xx_acx_feature_cfg(struct wl12xx *wl); +int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len); +int wl12xx_acx_data_path_params(struct wl12xx *wl, + struct acx_data_path_params_resp *data_path); +int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time); +int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter); +int wl12xx_acx_pd_threshold(struct wl12xx *wl); +int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time); +int wl12xx_acx_group_address_tbl(struct wl12xx *wl); +int wl12xx_acx_service_period_timeout(struct wl12xx *wl); +int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold); +int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl); +int wl12xx_acx_beacon_filter_table(struct wl12xx *wl); +int wl12xx_acx_sg_enable(struct wl12xx *wl); +int wl12xx_acx_sg_cfg(struct wl12xx *wl); +int wl12xx_acx_cca_threshold(struct wl12xx *wl); +int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl); +int wl12xx_acx_aid(struct wl12xx *wl, u16 aid); +int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask); +int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble); +int wl12xx_acx_cts_protect(struct wl12xx *wl, + enum acx_ctsprotect_type ctsprotect); +int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats); + +#endif /* __WL12XX_ACX_H__ */ diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c new file mode 100644 index 000000000000..48ac08c429bd --- /dev/null +++ b/drivers/net/wireless/wl12xx/boot.c @@ -0,0 +1,295 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include + +#include "reg.h" +#include "boot.h" +#include "spi.h" +#include "event.h" + +static void wl12xx_boot_enable_interrupts(struct wl12xx *wl) +{ + enable_irq(wl->irq); +} + +void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl) +{ + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask)); + wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL); +} + +int wl12xx_boot_soft_reset(struct wl12xx *wl) +{ + unsigned long timeout; + u32 boot_data; + + /* perform soft reset */ + wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); + + /* SOFT_RESET is self clearing */ + timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); + while (1) { + boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET); + wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); + if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) + break; + + if (time_after(jiffies, timeout)) { + /* 1.2 check pWhalBus->uSelfClearTime if the + * timeout was reached */ + wl12xx_error("soft reset timeout"); + return -1; + } + + udelay(SOFT_RESET_STALL_TIME); + } + + /* disable Rx/Tx */ + wl12xx_reg_write32(wl, ENABLE, 0x0); + + /* disable auto calibration on start*/ + wl12xx_reg_write32(wl, SPARE_A2, 0xffff); + + return 0; +} + +int wl12xx_boot_init_seq(struct wl12xx *wl) +{ + u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq; + + /* + * col #1: INTEGER_DIVIDER + * col #2: FRACTIONAL_DIVIDER + * col #3: ATTN_BB + * col #4: ALPHA_BB + * col #5: STOP_TIME_BB + * col #6: BB_PLL_LOOP_FILTER + */ + static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = { + + { 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/ + { 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/ + { 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/ + { 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/ + { 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */ + }; + + /* read NVS params */ + scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6); + wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6); + + /* read ELP_CMD */ + elp_cmd = wl12xx_reg_read32(wl, ELP_CMD); + wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd); + + /* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */ + ref_freq = scr_pad6 & 0x000000FF; + wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq); + + wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9); + + /* + * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME) + */ + wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6); + + /* + * set the clock detect feature to work in the restart wu procedure + * (ELP_CFG_MODE[14]) and Select the clock source type + * (ELP_CFG_MODE[13:12]) + */ + tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000; + wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp); + + /* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */ + elp_cmd |= 0x00000040; + wl12xx_reg_write32(wl, ELP_CMD, elp_cmd); + + /* PG 1.2: Set the BB PLL stable time to be 1000usec + * (PLL_STABLE_TIME) */ + wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20); + + /* PG 1.2: read clock request time */ + init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME); + + /* + * PG 1.2: set the clock request time to be ref_clk_settling_time - + * 1ms = 4ms + */ + if (init_data > 0x21) + tmp = init_data - 0x21; + else + tmp = 0; + wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp); + + /* set BB PLL configurations in RF AFE */ + wl12xx_reg_write32(wl, 0x003058cc, 0x4B5); + + /* set RF_AFE_REG_5 */ + wl12xx_reg_write32(wl, 0x003058d4, 0x50); + + /* set RF_AFE_CTRL_REG_2 */ + wl12xx_reg_write32(wl, 0x00305948, 0x11c001); + + /* + * change RF PLL and BB PLL divider for VCO clock and adjust VCO + * bais current(RF_AFE_REG_13) + */ + wl12xx_reg_write32(wl, 0x003058f4, 0x1e); + + /* set BB PLL configurations */ + tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000; + wl12xx_reg_write32(wl, 0x00305840, tmp); + + /* set fractional divider according to Appendix C-BB PLL + * Calculations + */ + tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER]; + wl12xx_reg_write32(wl, 0x00305844, tmp); + + /* set the initial data for the sigma delta */ + wl12xx_reg_write32(wl, 0x00305848, 0x3039); + + /* + * set the accumulator attenuation value, calibration loop1 + * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and + * the VCO gain + */ + tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) | + (LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1; + wl12xx_reg_write32(wl, 0x00305854, tmp); + + /* + * set the calibration stop time after holdoff time expires and set + * settling time HOLD_OFF_TIME_BB + */ + tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000; + wl12xx_reg_write32(wl, 0x00305858, tmp); + + /* + * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL + * constant leakage current to linearize PFD to 0uA - + * BB_ILOOPF[7:3] + */ + tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030; + wl12xx_reg_write32(wl, 0x003058f8, tmp); + + /* + * set regulator output voltage for n divider to + * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2], + * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB + * PLL auto-call to normal mode- BB_CALGAIN_3DB[8] + */ + wl12xx_reg_write32(wl, 0x003058f0, 0x29); + + /* enable restart wakeup sequence (ELP_CMD[0]) */ + wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1); + + /* restart sequence completed */ + udelay(2000); + + return 0; +} + +int wl12xx_boot_run_firmware(struct wl12xx *wl) +{ + int loop, ret; + u32 chip_id, interrupt; + + wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); + + chip_id = wl12xx_reg_read32(wl, CHIP_ID_B); + + wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id); + + if (chip_id != wl->chip.id) { + wl12xx_error("chip id doesn't match after firmware boot"); + return -EIO; + } + + /* wait for init to complete */ + loop = 0; + while (loop++ < INIT_LOOP) { + udelay(INIT_LOOP_DELAY); + interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + + if (interrupt == 0xffffffff) { + wl12xx_error("error reading hardware complete " + "init indication"); + return -EIO; + } + /* check that ACX_INTR_INIT_COMPLETE is enabled */ + else if (interrupt & wl->chip.intr_init_complete) { + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK, + wl->chip.intr_init_complete); + break; + } + } + + if (loop >= INIT_LOOP) { + wl12xx_error("timeout waiting for the hardware to " + "complete initialization"); + return -EIO; + } + + /* get hardware config command mail box */ + wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR); + + /* get hardware config event mail box */ + wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR); + + /* set the working partition to its "running" mode offset */ + wl12xx_set_partition(wl, + wl->chip.p_table[PART_WORK].mem.start, + wl->chip.p_table[PART_WORK].mem.size, + wl->chip.p_table[PART_WORK].reg.start, + wl->chip.p_table[PART_WORK].reg.size); + + wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", + wl->cmd_box_addr, wl->event_box_addr); + + /* + * in case of full asynchronous mode the firmware event must be + * ready to receive event from the command mailbox + */ + + /* enable gpio interrupts */ + wl12xx_boot_enable_interrupts(wl); + + wl->chip.op_target_enable_interrupts(wl); + + /* unmask all mbox events */ + wl->event_mask = 0xffffffff; + + ret = wl12xx_event_unmask(wl); + if (ret < 0) { + wl12xx_error("EVENT mask setting failed"); + return ret; + } + + wl12xx_event_mbox_config(wl); + + /* firmware startup completed */ + return 0; +} diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h new file mode 100644 index 000000000000..4fa73132baae --- /dev/null +++ b/drivers/net/wireless/wl12xx/boot.h @@ -0,0 +1,40 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __BOOT_H__ +#define __BOOT_H__ + +#include "wl12xx.h" + +int wl12xx_boot_soft_reset(struct wl12xx *wl); +int wl12xx_boot_init_seq(struct wl12xx *wl); +int wl12xx_boot_run_firmware(struct wl12xx *wl); +void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl); + +/* number of times we try to read the INIT interrupt */ +#define INIT_LOOP 20000 + +/* delay between retries */ +#define INIT_LOOP_DELAY 50 + +#endif diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c new file mode 100644 index 000000000000..f73ab602b7ae --- /dev/null +++ b/drivers/net/wireless/wl12xx/cmd.c @@ -0,0 +1,353 @@ +#include "cmd.h" + +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "reg.h" +#include "spi.h" +#include "ps.h" + +int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len) +{ + struct wl12xx_command cmd; + unsigned long timeout; + size_t cmd_len; + u32 intr; + int ret = 0; + + memset(&cmd, 0, sizeof(cmd)); + cmd.id = type; + cmd.status = 0; + memcpy(cmd.parameters, buf, buf_len); + cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN; + + wl12xx_ps_elp_wakeup(wl); + + wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len); + + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); + + timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT); + + intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + while (!(intr & wl->chip.intr_cmd_complete)) { + if (time_after(jiffies, timeout)) { + wl12xx_error("command complete timeout"); + ret = -ETIMEDOUT; + goto out; + } + + msleep(1); + + intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + } + + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK, + wl->chip.intr_cmd_complete); + +out: + wl12xx_ps_elp_sleep(wl); + + return ret; +} + +int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer) +{ + int ret; + + wl12xx_debug(DEBUG_CMD, "cmd test"); + + ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len); + if (ret < 0) { + wl12xx_warning("TEST command failed"); + return ret; + } + + if (answer) { + struct wl12xx_command *cmd_answer; + + /* + * The test command got in, we can read the answer. + * The answer would be a wl12xx_command, where the + * parameter array contains the actual answer. + */ + + wl12xx_ps_elp_wakeup(wl); + + wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len); + + wl12xx_ps_elp_sleep(wl); + + cmd_answer = buf; + if (cmd_answer->status != CMD_STATUS_SUCCESS) + wl12xx_error("TEST command answer error: %d", + cmd_answer->status); + } + + return 0; +} + + +int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len, + void *answer) +{ + struct wl12xx_command *cmd; + struct acx_header header; + int ret; + + wl12xx_debug(DEBUG_CMD, "cmd interrogate"); + + header.id = ie_id; + header.len = ie_len - sizeof(header); + + ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header)); + if (ret < 0) { + wl12xx_error("INTERROGATE command failed"); + return ret; + } + + wl12xx_ps_elp_wakeup(wl); + + /* the interrogate command got in, we can read the answer */ + wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer, + CMDMBOX_HEADER_LEN + ie_len); + + wl12xx_ps_elp_sleep(wl); + + cmd = answer; + if (cmd->status != CMD_STATUS_SUCCESS) + wl12xx_error("INTERROGATE command error: %d", + cmd->status); + + return 0; + +} + +int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len) +{ + int ret; + + wl12xx_debug(DEBUG_CMD, "cmd configure"); + + ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie, + ie_len); + if (ret < 0) { + wl12xx_warning("CONFIGURE command NOK"); + return ret; + } + + return 0; + +} + +int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity, + void *bitmap, u16 bitmap_len, u8 bitmap_control) +{ + struct vbm_update_request vbm; + int ret; + + wl12xx_debug(DEBUG_CMD, "cmd vbm"); + + /* Count and period will be filled by the target */ + vbm.tim.bitmap_ctrl = bitmap_control; + if (bitmap_len > PARTIAL_VBM_MAX) { + wl12xx_warning("cmd vbm len is %d B, truncating to %d", + bitmap_len, PARTIAL_VBM_MAX); + bitmap_len = PARTIAL_VBM_MAX; + } + memcpy(vbm.tim.pvb_field, bitmap, bitmap_len); + vbm.tim.identity = identity; + vbm.tim.length = bitmap_len + 3; + + vbm.len = cpu_to_le16(bitmap_len + 5); + + ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm)); + if (ret < 0) { + wl12xx_error("VBM command failed"); + return ret; + } + + return 0; +} + +int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable) +{ + int ret; + u16 cmd_rx, cmd_tx; + + wl12xx_debug(DEBUG_CMD, "cmd data path"); + + if (enable) { + cmd_rx = CMD_ENABLE_RX; + cmd_tx = CMD_ENABLE_TX; + } else { + cmd_rx = CMD_DISABLE_RX; + cmd_tx = CMD_DISABLE_TX; + } + + ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel)); + if (ret < 0) { + wl12xx_error("rx %s cmd for channel %d failed", + enable ? "start" : "stop", channel); + return ret; + } + + wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d", + enable ? "start" : "stop", channel); + + ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel)); + if (ret < 0) { + wl12xx_error("tx %s cmd for channel %d failed", + enable ? "start" : "stop", channel); + return ret; + } + + wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d", + enable ? "start" : "stop", channel); + + return 0; +} + +int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval, + u16 beacon_interval, u8 wait) +{ + unsigned long timeout; + struct cmd_join join = {}; + int ret, i; + u8 *bssid; + + /* FIXME: this should be in main.c */ + ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE, + DEFAULT_HW_GEN_MODULATION_TYPE, + wl->tx_mgmt_frm_rate, + wl->tx_mgmt_frm_mod); + if (ret < 0) + return ret; + + wl12xx_debug(DEBUG_CMD, "cmd join"); + + /* Reverse order BSSID */ + bssid = (u8 *)&join.bssid_lsb; + for (i = 0; i < ETH_ALEN; i++) + bssid[i] = wl->bssid[ETH_ALEN - i - 1]; + + join.rx_config_options = wl->rx_config; + join.rx_filter_options = wl->rx_filter; + + join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | + RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; + + join.beacon_interval = beacon_interval; + join.dtim_interval = dtim_interval; + join.bss_type = bss_type; + join.channel = wl->channel; + join.ctrl = JOIN_CMD_CTRL_TX_FLUSH; + + ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join)); + if (ret < 0) { + wl12xx_error("failed to initiate cmd join"); + return ret; + } + + timeout = msecs_to_jiffies(JOIN_TIMEOUT); + + /* + * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to + * simplify locking we just sleep instead, for now + */ + if (wait) + msleep(10); + + return 0; +} + +int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode) +{ + int ret; + struct acx_ps_params ps_params; + + /* FIXME: this should be in ps.c */ + ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int); + if (ret < 0) { + wl12xx_error("Couldnt set wake up conditions"); + return ret; + } + + wl12xx_debug(DEBUG_CMD, "cmd set ps mode"); + + ps_params.ps_mode = ps_mode; + ps_params.send_null_data = 1; + ps_params.retries = 5; + ps_params.hang_over_period = 128; + ps_params.null_data_rate = 1; /* 1 Mbps */ + + ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params, + sizeof(ps_params)); + if (ret < 0) { + wl12xx_error("cmd set_ps_mode failed"); + return ret; + } + + return 0; +} + +int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer) +{ + struct cmd_read_write_memory mem_cmd, *mem_answer; + struct wl12xx_command cmd; + int ret; + + wl12xx_debug(DEBUG_CMD, "cmd read memory"); + + memset(&mem_cmd, 0, sizeof(mem_cmd)); + mem_cmd.addr = addr; + mem_cmd.size = len; + + ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd)); + if (ret < 0) { + wl12xx_error("read memory command failed: %d", ret); + return ret; + } + + /* the read command got in, we can now read the answer */ + wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd, + CMDMBOX_HEADER_LEN + sizeof(mem_cmd)); + + if (cmd.status != CMD_STATUS_SUCCESS) + wl12xx_error("error in read command result: %d", cmd.status); + + mem_answer = (struct cmd_read_write_memory *) cmd.parameters; + memcpy(answer, mem_answer->value, len); + + return 0; +} + +int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id, + void *buf, size_t buf_len) +{ + struct wl12xx_cmd_packet_template template; + int ret; + + wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id); + + memset(&template, 0, sizeof(template)); + + WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE); + buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE); + template.size = cpu_to_le16(buf_len); + + if (buf) + memcpy(template.template, buf, buf_len); + + ret = wl12xx_cmd_send(wl, cmd_id, &template, + sizeof(template.size) + buf_len); + if (ret < 0) { + wl12xx_warning("cmd set_template failed: %d", ret); + return ret; + } + + return 0; +} diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h new file mode 100644 index 000000000000..aa307dcd081f --- /dev/null +++ b/drivers/net/wireless/wl12xx/cmd.h @@ -0,0 +1,265 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_CMD_H__ +#define __WL12XX_CMD_H__ + +#include "wl12xx.h" + +int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len); +int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer); +int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len, + void *answer); +int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len); +int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity, + void *bitmap, u16 bitmap_len, u8 bitmap_control); +int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable); +int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval, + u16 beacon_interval, u8 wait); +int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode); +int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer); +int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id, + void *buf, size_t buf_len); + +/* unit ms */ +#define WL12XX_COMMAND_TIMEOUT 2000 + +#define WL12XX_MAX_TEMPLATE_SIZE 300 + +struct wl12xx_cmd_packet_template { + __le16 size; + u8 template[WL12XX_MAX_TEMPLATE_SIZE]; +} __attribute__ ((packed)); + +enum wl12xx_commands { + CMD_RESET = 0, + CMD_INTERROGATE = 1, /*use this to read information elements*/ + CMD_CONFIGURE = 2, /*use this to write information elements*/ + CMD_ENABLE_RX = 3, + CMD_ENABLE_TX = 4, + CMD_DISABLE_RX = 5, + CMD_DISABLE_TX = 6, + CMD_SCAN = 8, + CMD_STOP_SCAN = 9, + CMD_VBM = 10, + CMD_START_JOIN = 11, + CMD_SET_KEYS = 12, + CMD_READ_MEMORY = 13, + CMD_WRITE_MEMORY = 14, + CMD_BEACON = 19, + CMD_PROBE_RESP = 20, + CMD_NULL_DATA = 21, + CMD_PROBE_REQ = 22, + CMD_TEST = 23, + CMD_RADIO_CALIBRATE = 25, /* OBSOLETE */ + CMD_ENABLE_RX_PATH = 27, /* OBSOLETE */ + CMD_NOISE_HIST = 28, + CMD_RX_RESET = 29, + CMD_PS_POLL = 30, + CMD_QOS_NULL_DATA = 31, + CMD_LNA_CONTROL = 32, + CMD_SET_BCN_MODE = 33, + CMD_MEASUREMENT = 34, + CMD_STOP_MEASUREMENT = 35, + CMD_DISCONNECT = 36, + CMD_SET_PS_MODE = 37, + CMD_CHANNEL_SWITCH = 38, + CMD_STOP_CHANNEL_SWICTH = 39, + CMD_AP_DISCOVERY = 40, + CMD_STOP_AP_DISCOVERY = 41, + CMD_SPS_SCAN = 42, + CMD_STOP_SPS_SCAN = 43, + CMD_HEALTH_CHECK = 45, + CMD_DEBUG = 46, + CMD_TRIGGER_SCAN_TO = 47, + + NUM_COMMANDS, + MAX_COMMAND_ID = 0xFFFF, +}; + +#define MAX_CMD_PARAMS 572 + +struct wl12xx_command { + u16 id; + u16 status; + u8 parameters[MAX_CMD_PARAMS]; +}; + +enum { + CMD_MAILBOX_IDLE = 0, + CMD_STATUS_SUCCESS = 1, + CMD_STATUS_UNKNOWN_CMD = 2, + CMD_STATUS_UNKNOWN_IE = 3, + CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11, + CMD_STATUS_RX_BUSY = 13, + CMD_STATUS_INVALID_PARAM = 14, + CMD_STATUS_TEMPLATE_TOO_LARGE = 15, + CMD_STATUS_OUT_OF_MEMORY = 16, + CMD_STATUS_STA_TABLE_FULL = 17, + CMD_STATUS_RADIO_ERROR = 18, + CMD_STATUS_WRONG_NESTING = 19, + CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/ + CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/ + MAX_COMMAND_STATUS = 0xff +}; + + +/* + * CMD_READ_MEMORY + * + * The host issues this command to read the WiLink device memory/registers. + * + * Note: The Base Band address has special handling (16 bits registers and + * addresses). For more information, see the hardware specification. + */ +/* + * CMD_WRITE_MEMORY + * + * The host issues this command to write the WiLink device memory/registers. + * + * The Base Band address has special handling (16 bits registers and + * addresses). For more information, see the hardware specification. + */ +#define MAX_READ_SIZE 256 + +struct cmd_read_write_memory { + /* The address of the memory to read from or write to.*/ + u32 addr; + + /* The amount of data in bytes to read from or write to the WiLink + * device.*/ + u32 size; + + /* The actual value read from or written to the Wilink. The source + of this field is the Host in WRITE command or the Wilink in READ + command. */ + u8 value[MAX_READ_SIZE]; +}; + +#define CMDMBOX_HEADER_LEN 4 +#define CMDMBOX_INFO_ELEM_HEADER_LEN 4 + + +struct basic_scan_parameters { + u32 rx_config_options; + u32 rx_filter_options; + + /* + * Scan options: + * bit 0: When this bit is set, passive scan. + * bit 1: Band, when this bit is set we scan + * in the 5Ghz band. + * bit 2: voice mode, 0 for normal scan. + * bit 3: scan priority, 1 for high priority. + */ + u16 scan_options; + + /* Number of channels to scan */ + u8 num_channels; + + /* Number opf probe requests to send, per channel */ + u8 num_probe_requests; + + /* Rate and modulation for probe requests */ + u16 tx_rate; + + u8 tid_trigger; + u8 ssid_len; + u32 ssid[8]; + +} __attribute__ ((packed)); + +struct basic_scan_channel_parameters { + u32 min_duration; /* in TU */ + u32 max_duration; /* in TU */ + u32 bssid_lsb; + u16 bssid_msb; + + /* + * bits 0-3: Early termination count. + * bits 4-5: Early termination condition. + */ + u8 early_termination; + + u8 tx_power_att; + u8 channel; + u8 pad[3]; +} __attribute__ ((packed)); + +/* SCAN parameters */ +#define SCAN_MAX_NUM_OF_CHANNELS 16 + +struct cmd_scan { + struct basic_scan_parameters params; + struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS]; +} __attribute__ ((packed)); + +enum { + BSS_TYPE_IBSS = 0, + BSS_TYPE_STA_BSS = 2, + BSS_TYPE_AP_BSS = 3, + MAX_BSS_TYPE = 0xFF +}; + +#define JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */ +#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE 0x01 /* Early wakeup time */ + + +struct cmd_join { + u32 bssid_lsb; + u16 bssid_msb; + u16 beacon_interval; /* in TBTTs */ + u32 rx_config_options; + u32 rx_filter_options; + + /* + * The target uses this field to determine the rate at + * which to transmit control frame responses (such as + * ACK or CTS frames). + */ + u16 basic_rate_set; + u8 dtim_interval; + u8 tx_ctrl_frame_rate; /* OBSOLETE */ + u8 tx_ctrl_frame_mod; /* OBSOLETE */ + /* + * bits 0-2: This bitwise field specifies the type + * of BSS to start or join (BSS_TYPE_*). + * bit 4: Band - The radio band in which to join + * or start. + * 0 - 2.4GHz band + * 1 - 5GHz band + * bits 3, 5-7: Reserved + */ + u8 bss_type; + u8 channel; + u8 ssid_len; + u8 ssid[IW_ESSID_MAX_SIZE]; + u8 ctrl; /* JOIN_CMD_CTRL_* */ + u8 tx_mgt_frame_rate; /* OBSOLETE */ + u8 tx_mgt_frame_mod; /* OBSOLETE */ + u8 reserved; +} __attribute__ ((packed)); + + +#endif /* __WL12XX_CMD_H__ */ diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c new file mode 100644 index 000000000000..cdb368ce4dae --- /dev/null +++ b/drivers/net/wireless/wl12xx/debugfs.c @@ -0,0 +1,508 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "debugfs.h" + +#include + +#include "wl12xx.h" +#include "acx.h" + +/* ms */ +#define WL12XX_DEBUGFS_STATS_LIFETIME 1000 + +/* debugfs macros idea from mac80211 */ + +#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...) \ +static ssize_t name## _read(struct file *file, char __user *userbuf, \ + size_t count, loff_t *ppos) \ +{ \ + struct wl12xx *wl = file->private_data; \ + char buf[buflen]; \ + int res; \ + \ + res = scnprintf(buf, buflen, fmt "\n", ##value); \ + return simple_read_from_buffer(userbuf, count, ppos, buf, res); \ +} \ + \ +static const struct file_operations name## _ops = { \ + .read = name## _read, \ + .open = wl12xx_open_file_generic, \ +}; + +#define DEBUGFS_ADD(name, parent) \ + wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \ + wl, &name## _ops); \ + if (IS_ERR(wl->debugfs.name)) { \ + ret = PTR_ERR(wl->debugfs.name); \ + wl->debugfs.name = NULL; \ + goto out; \ + } + +#define DEBUGFS_DEL(name) \ + do { \ + debugfs_remove(wl->debugfs.name); \ + wl->debugfs.name = NULL; \ + } while (0) + +#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt) \ +static ssize_t sub## _ ##name## _read(struct file *file, \ + char __user *userbuf, \ + size_t count, loff_t *ppos) \ +{ \ + struct wl12xx *wl = file->private_data; \ + char buf[buflen]; \ + int res; \ + \ + wl12xx_debugfs_update_stats(wl); \ + \ + res = scnprintf(buf, buflen, fmt "\n", \ + wl->stats.fw_stats->sub.name); \ + return simple_read_from_buffer(userbuf, count, ppos, buf, res); \ +} \ + \ +static const struct file_operations sub## _ ##name## _ops = { \ + .read = sub## _ ##name## _read, \ + .open = wl12xx_open_file_generic, \ +}; + +#define DEBUGFS_FWSTATS_ADD(sub, name) \ + DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics) + +#define DEBUGFS_FWSTATS_DEL(sub, name) \ + DEBUGFS_DEL(sub## _ ##name) + +static void wl12xx_debugfs_update_stats(struct wl12xx *wl) +{ + mutex_lock(&wl->mutex); + + if (wl->state == WL12XX_STATE_ON && + time_after(jiffies, wl->stats.fw_stats_update + + msecs_to_jiffies(WL12XX_DEBUGFS_STATS_LIFETIME))) { + wl12xx_acx_statistics(wl, wl->stats.fw_stats); + wl->stats.fw_stats_update = jiffies; + } + + mutex_unlock(&wl->mutex); +} + +static int wl12xx_open_file_generic(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u"); +DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u"); +DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u"); +DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u"); +DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u"); +DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u"); +/* skipping wep.reserved */ +DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u"); +DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u"); +DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u"); +DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u"); +/* skipping cont_miss_bcns_spread for now */ +DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u"); +DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u"); +DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u"); +DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u"); +DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u"); +DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u"); +DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u"); +DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u"); +DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u"); +DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u"); +DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u"); +DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u"); +DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u"); +DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u"); +DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u"); +DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u"); + +DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data, + 20, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u"); + +DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count); +DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u", + wl->stats.excessive_retries); + +static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct wl12xx *wl = file->private_data; + u32 queue_len; + char buf[20]; + int res; + + queue_len = skb_queue_len(&wl->tx_queue); + + res = scnprintf(buf, sizeof(buf), "%u\n", queue_len); + return simple_read_from_buffer(userbuf, count, ppos, buf, res); +} + +static const struct file_operations tx_queue_len_ops = { + .read = tx_queue_len_read, + .open = wl12xx_open_file_generic, +}; + +static void wl12xx_debugfs_delete_files(struct wl12xx *wl) +{ + DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow); + + DEBUGFS_FWSTATS_DEL(rx, out_of_mem); + DEBUGFS_FWSTATS_DEL(rx, hdr_overflow); + DEBUGFS_FWSTATS_DEL(rx, hw_stuck); + DEBUGFS_FWSTATS_DEL(rx, dropped); + DEBUGFS_FWSTATS_DEL(rx, fcs_err); + DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig); + DEBUGFS_FWSTATS_DEL(rx, path_reset); + DEBUGFS_FWSTATS_DEL(rx, reset_counter); + + DEBUGFS_FWSTATS_DEL(dma, rx_requested); + DEBUGFS_FWSTATS_DEL(dma, rx_errors); + DEBUGFS_FWSTATS_DEL(dma, tx_requested); + DEBUGFS_FWSTATS_DEL(dma, tx_errors); + + DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt); + DEBUGFS_FWSTATS_DEL(isr, fiqs); + DEBUGFS_FWSTATS_DEL(isr, rx_headers); + DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow); + DEBUGFS_FWSTATS_DEL(isr, rx_rdys); + DEBUGFS_FWSTATS_DEL(isr, irqs); + DEBUGFS_FWSTATS_DEL(isr, tx_procs); + DEBUGFS_FWSTATS_DEL(isr, decrypt_done); + DEBUGFS_FWSTATS_DEL(isr, dma0_done); + DEBUGFS_FWSTATS_DEL(isr, dma1_done); + DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete); + DEBUGFS_FWSTATS_DEL(isr, commands); + DEBUGFS_FWSTATS_DEL(isr, rx_procs); + DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes); + DEBUGFS_FWSTATS_DEL(isr, host_acknowledges); + DEBUGFS_FWSTATS_DEL(isr, pci_pm); + DEBUGFS_FWSTATS_DEL(isr, wakeups); + DEBUGFS_FWSTATS_DEL(isr, low_rssi); + + DEBUGFS_FWSTATS_DEL(wep, addr_key_count); + DEBUGFS_FWSTATS_DEL(wep, default_key_count); + /* skipping wep.reserved */ + DEBUGFS_FWSTATS_DEL(wep, key_not_found); + DEBUGFS_FWSTATS_DEL(wep, decrypt_fail); + DEBUGFS_FWSTATS_DEL(wep, packets); + DEBUGFS_FWSTATS_DEL(wep, interrupt); + + DEBUGFS_FWSTATS_DEL(pwr, ps_enter); + DEBUGFS_FWSTATS_DEL(pwr, elp_enter); + DEBUGFS_FWSTATS_DEL(pwr, missing_bcns); + DEBUGFS_FWSTATS_DEL(pwr, wake_on_host); + DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp); + DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps); + DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps); + DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons); + DEBUGFS_FWSTATS_DEL(pwr, power_save_off); + DEBUGFS_FWSTATS_DEL(pwr, enable_ps); + DEBUGFS_FWSTATS_DEL(pwr, disable_ps); + DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps); + /* skipping cont_miss_bcns_spread for now */ + DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons); + + DEBUGFS_FWSTATS_DEL(mic, rx_pkts); + DEBUGFS_FWSTATS_DEL(mic, calc_failure); + + DEBUGFS_FWSTATS_DEL(aes, encrypt_fail); + DEBUGFS_FWSTATS_DEL(aes, decrypt_fail); + DEBUGFS_FWSTATS_DEL(aes, encrypt_packets); + DEBUGFS_FWSTATS_DEL(aes, decrypt_packets); + DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt); + DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt); + + DEBUGFS_FWSTATS_DEL(event, heart_beat); + DEBUGFS_FWSTATS_DEL(event, calibration); + DEBUGFS_FWSTATS_DEL(event, rx_mismatch); + DEBUGFS_FWSTATS_DEL(event, rx_mem_empty); + DEBUGFS_FWSTATS_DEL(event, rx_pool); + DEBUGFS_FWSTATS_DEL(event, oom_late); + DEBUGFS_FWSTATS_DEL(event, phy_transmit_error); + DEBUGFS_FWSTATS_DEL(event, tx_stuck); + + DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts); + DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts); + DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime); + DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn); + DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn); + DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization); + DEBUGFS_FWSTATS_DEL(ps, upsd_utilization); + + DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop); + DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data); + DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data); + DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data); + DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data); + + DEBUGFS_DEL(tx_queue_len); + DEBUGFS_DEL(retry_count); + DEBUGFS_DEL(excessive_retries); +} + +static int wl12xx_debugfs_add_files(struct wl12xx *wl) +{ + int ret = 0; + + DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow); + + DEBUGFS_FWSTATS_ADD(rx, out_of_mem); + DEBUGFS_FWSTATS_ADD(rx, hdr_overflow); + DEBUGFS_FWSTATS_ADD(rx, hw_stuck); + DEBUGFS_FWSTATS_ADD(rx, dropped); + DEBUGFS_FWSTATS_ADD(rx, fcs_err); + DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig); + DEBUGFS_FWSTATS_ADD(rx, path_reset); + DEBUGFS_FWSTATS_ADD(rx, reset_counter); + + DEBUGFS_FWSTATS_ADD(dma, rx_requested); + DEBUGFS_FWSTATS_ADD(dma, rx_errors); + DEBUGFS_FWSTATS_ADD(dma, tx_requested); + DEBUGFS_FWSTATS_ADD(dma, tx_errors); + + DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt); + DEBUGFS_FWSTATS_ADD(isr, fiqs); + DEBUGFS_FWSTATS_ADD(isr, rx_headers); + DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow); + DEBUGFS_FWSTATS_ADD(isr, rx_rdys); + DEBUGFS_FWSTATS_ADD(isr, irqs); + DEBUGFS_FWSTATS_ADD(isr, tx_procs); + DEBUGFS_FWSTATS_ADD(isr, decrypt_done); + DEBUGFS_FWSTATS_ADD(isr, dma0_done); + DEBUGFS_FWSTATS_ADD(isr, dma1_done); + DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete); + DEBUGFS_FWSTATS_ADD(isr, commands); + DEBUGFS_FWSTATS_ADD(isr, rx_procs); + DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes); + DEBUGFS_FWSTATS_ADD(isr, host_acknowledges); + DEBUGFS_FWSTATS_ADD(isr, pci_pm); + DEBUGFS_FWSTATS_ADD(isr, wakeups); + DEBUGFS_FWSTATS_ADD(isr, low_rssi); + + DEBUGFS_FWSTATS_ADD(wep, addr_key_count); + DEBUGFS_FWSTATS_ADD(wep, default_key_count); + /* skipping wep.reserved */ + DEBUGFS_FWSTATS_ADD(wep, key_not_found); + DEBUGFS_FWSTATS_ADD(wep, decrypt_fail); + DEBUGFS_FWSTATS_ADD(wep, packets); + DEBUGFS_FWSTATS_ADD(wep, interrupt); + + DEBUGFS_FWSTATS_ADD(pwr, ps_enter); + DEBUGFS_FWSTATS_ADD(pwr, elp_enter); + DEBUGFS_FWSTATS_ADD(pwr, missing_bcns); + DEBUGFS_FWSTATS_ADD(pwr, wake_on_host); + DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp); + DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps); + DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps); + DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons); + DEBUGFS_FWSTATS_ADD(pwr, power_save_off); + DEBUGFS_FWSTATS_ADD(pwr, enable_ps); + DEBUGFS_FWSTATS_ADD(pwr, disable_ps); + DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps); + /* skipping cont_miss_bcns_spread for now */ + DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons); + + DEBUGFS_FWSTATS_ADD(mic, rx_pkts); + DEBUGFS_FWSTATS_ADD(mic, calc_failure); + + DEBUGFS_FWSTATS_ADD(aes, encrypt_fail); + DEBUGFS_FWSTATS_ADD(aes, decrypt_fail); + DEBUGFS_FWSTATS_ADD(aes, encrypt_packets); + DEBUGFS_FWSTATS_ADD(aes, decrypt_packets); + DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt); + DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt); + + DEBUGFS_FWSTATS_ADD(event, heart_beat); + DEBUGFS_FWSTATS_ADD(event, calibration); + DEBUGFS_FWSTATS_ADD(event, rx_mismatch); + DEBUGFS_FWSTATS_ADD(event, rx_mem_empty); + DEBUGFS_FWSTATS_ADD(event, rx_pool); + DEBUGFS_FWSTATS_ADD(event, oom_late); + DEBUGFS_FWSTATS_ADD(event, phy_transmit_error); + DEBUGFS_FWSTATS_ADD(event, tx_stuck); + + DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts); + DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts); + DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime); + DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn); + DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn); + DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization); + DEBUGFS_FWSTATS_ADD(ps, upsd_utilization); + + DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop); + DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data); + + DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir); + DEBUGFS_ADD(retry_count, wl->debugfs.rootdir); + DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir); + +out: + if (ret < 0) + wl12xx_debugfs_delete_files(wl); + + return ret; +} + +void wl12xx_debugfs_reset(struct wl12xx *wl) +{ + memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats)); + wl->stats.retry_count = 0; + wl->stats.excessive_retries = 0; +} + +int wl12xx_debugfs_init(struct wl12xx *wl) +{ + int ret; + + wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL); + + if (IS_ERR(wl->debugfs.rootdir)) { + ret = PTR_ERR(wl->debugfs.rootdir); + wl->debugfs.rootdir = NULL; + goto err; + } + + wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics", + wl->debugfs.rootdir); + + if (IS_ERR(wl->debugfs.fw_statistics)) { + ret = PTR_ERR(wl->debugfs.fw_statistics); + wl->debugfs.fw_statistics = NULL; + goto err_root; + } + + wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats), + GFP_KERNEL); + + if (!wl->stats.fw_stats) { + ret = -ENOMEM; + goto err_fw; + } + + wl->stats.fw_stats_update = jiffies; + + ret = wl12xx_debugfs_add_files(wl); + + if (ret < 0) + goto err_file; + + return 0; + +err_file: + kfree(wl->stats.fw_stats); + wl->stats.fw_stats = NULL; + +err_fw: + debugfs_remove(wl->debugfs.fw_statistics); + wl->debugfs.fw_statistics = NULL; + +err_root: + debugfs_remove(wl->debugfs.rootdir); + wl->debugfs.rootdir = NULL; + +err: + return ret; +} + +void wl12xx_debugfs_exit(struct wl12xx *wl) +{ + wl12xx_debugfs_delete_files(wl); + + kfree(wl->stats.fw_stats); + wl->stats.fw_stats = NULL; + + debugfs_remove(wl->debugfs.fw_statistics); + wl->debugfs.fw_statistics = NULL; + + debugfs_remove(wl->debugfs.rootdir); + wl->debugfs.rootdir = NULL; + +} diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h new file mode 100644 index 000000000000..562cdcbcc874 --- /dev/null +++ b/drivers/net/wireless/wl12xx/debugfs.h @@ -0,0 +1,33 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef WL12XX_DEBUGFS_H +#define WL12XX_DEBUGFS_H + +#include "wl12xx.h" + +int wl12xx_debugfs_init(struct wl12xx *wl); +void wl12xx_debugfs_exit(struct wl12xx *wl); +void wl12xx_debugfs_reset(struct wl12xx *wl); + +#endif /* WL12XX_DEBUGFS_H */ diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c new file mode 100644 index 000000000000..99529ca89a7e --- /dev/null +++ b/drivers/net/wireless/wl12xx/event.c @@ -0,0 +1,127 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "wl12xx.h" +#include "reg.h" +#include "spi.h" +#include "event.h" +#include "ps.h" + +static int wl12xx_event_scan_complete(struct wl12xx *wl, + struct event_mailbox *mbox) +{ + wl12xx_debug(DEBUG_EVENT, "status: 0x%x, channels: %d", + mbox->scheduled_scan_status, + mbox->scheduled_scan_channels); + + if (wl->scanning) { + mutex_unlock(&wl->mutex); + ieee80211_scan_completed(wl->hw, false); + mutex_lock(&wl->mutex); + wl->scanning = false; + } + + return 0; +} + +static void wl12xx_event_mbox_dump(struct event_mailbox *mbox) +{ + wl12xx_debug(DEBUG_EVENT, "MBOX DUMP:"); + wl12xx_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector); + wl12xx_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask); +} + +static int wl12xx_event_process(struct wl12xx *wl, struct event_mailbox *mbox) +{ + int ret; + u32 vector; + + wl12xx_event_mbox_dump(mbox); + + vector = mbox->events_vector & ~(mbox->events_mask); + wl12xx_debug(DEBUG_EVENT, "vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + ret = wl12xx_event_scan_complete(wl, mbox); + if (ret < 0) + return ret; + } + + if (vector & BSS_LOSE_EVENT_ID) { + wl12xx_debug(DEBUG_EVENT, "BSS_LOSE_EVENT"); + + if (wl->psm_requested && wl->psm) { + ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE); + if (ret < 0) + return ret; + } + } + + return 0; +} + +int wl12xx_event_unmask(struct wl12xx *wl) +{ + int ret; + + ret = wl12xx_acx_event_mbox_mask(wl, ~(wl->event_mask)); + if (ret < 0) + return ret; + + return 0; +} + +void wl12xx_event_mbox_config(struct wl12xx *wl) +{ + wl->mbox_ptr[0] = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR); + wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox); + + wl12xx_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x", + wl->mbox_ptr[0], wl->mbox_ptr[1]); +} + +int wl12xx_event_handle(struct wl12xx *wl, u8 mbox_num) +{ + struct event_mailbox mbox; + int ret; + + wl12xx_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num); + + if (mbox_num > 1) + return -EINVAL; + + /* first we read the mbox descriptor */ + wl12xx_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox, + sizeof(struct event_mailbox)); + + /* process the descriptor */ + ret = wl12xx_event_process(wl, &mbox); + if (ret < 0) + return ret; + + /* then we let the firmware know it can go on...*/ + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK); + + return 0; +} diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h new file mode 100644 index 000000000000..1f4c2f7438a7 --- /dev/null +++ b/drivers/net/wireless/wl12xx/event.h @@ -0,0 +1,121 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_EVENT_H__ +#define __WL12XX_EVENT_H__ + +/* + * Mbox events + * + * The event mechanism is based on a pair of event buffers (buffers A and + * B) at fixed locations in the target's memory. The host processes one + * buffer while the other buffer continues to collect events. If the host + * is not processing events, an interrupt is issued to signal that a buffer + * is ready. Once the host is done with processing events from one buffer, + * it signals the target (with an ACK interrupt) that the event buffer is + * free. + */ + +enum { + RESERVED1_EVENT_ID = BIT(0), + RESERVED2_EVENT_ID = BIT(1), + MEASUREMENT_START_EVENT_ID = BIT(2), + SCAN_COMPLETE_EVENT_ID = BIT(3), + CALIBRATION_COMPLETE_EVENT_ID = BIT(4), + ROAMING_TRIGGER_LOW_RSSI_EVENT_ID = BIT(5), + PS_REPORT_EVENT_ID = BIT(6), + SYNCHRONIZATION_TIMEOUT_EVENT_ID = BIT(7), + HEALTH_REPORT_EVENT_ID = BIT(8), + ACI_DETECTION_EVENT_ID = BIT(9), + DEBUG_REPORT_EVENT_ID = BIT(10), + MAC_STATUS_EVENT_ID = BIT(11), + DISCONNECT_EVENT_COMPLETE_ID = BIT(12), + JOIN_EVENT_COMPLETE_ID = BIT(13), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(14), + BSS_LOSE_EVENT_ID = BIT(15), + ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(16), + MEASUREMENT_COMPLETE_EVENT_ID = BIT(17), + AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(18), + SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(19), + PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(20), + RESET_BSS_EVENT_ID = BIT(21), + REGAINED_BSS_EVENT_ID = BIT(22), + ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID = BIT(23), + ROAMING_TRIGGER_LOW_SNR_EVENT_ID = BIT(24), + ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID = BIT(25), + + DBG_EVENT_ID = BIT(26), + BT_PTA_SENSE_EVENT_ID = BIT(27), + BT_PTA_PREDICTION_EVENT_ID = BIT(28), + BT_PTA_AVALANCHE_EVENT_ID = BIT(29), + + PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(30), + + EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff, +}; + +struct event_debug_report { + u8 debug_event_id; + u8 num_params; + u16 pad; + u32 report_1; + u32 report_2; + u32 report_3; +} __attribute__ ((packed)); + +struct event_mailbox { + u32 events_vector; + u32 events_mask; + u32 reserved_1; + u32 reserved_2; + + char average_rssi_level; + u8 ps_status; + u8 channel_switch_status; + u8 scheduled_scan_status; + + /* Channels scanned by the scheduled scan */ + u16 scheduled_scan_channels; + + /* If bit 0 is set -> target's fatal error */ + u16 health_report; + u16 bad_fft_counter; + u8 bt_pta_sense_info; + u8 bt_pta_protective_info; + u32 reserved; + u32 debug_report[2]; + + /* Number of FCS errors since last event */ + u32 fcs_err_counter; + + struct event_debug_report report; + u8 average_snr_level; + u8 padding[19]; +} __attribute__ ((packed)); + +int wl12xx_event_unmask(struct wl12xx *wl); +void wl12xx_event_mbox_config(struct wl12xx *wl); +int wl12xx_event_handle(struct wl12xx *wl, u8 mbox); + +#endif diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c new file mode 100644 index 000000000000..2a573a6010bd --- /dev/null +++ b/drivers/net/wireless/wl12xx/init.c @@ -0,0 +1,200 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "init.h" +#include "wl12xx_80211.h" +#include "acx.h" +#include "cmd.h" + +int wl12xx_hw_init_hwenc_config(struct wl12xx *wl) +{ + int ret; + + ret = wl12xx_acx_feature_cfg(wl); + if (ret < 0) { + wl12xx_warning("couldn't set feature config"); + return ret; + } + + ret = wl12xx_acx_default_key(wl, wl->default_key); + if (ret < 0) { + wl12xx_warning("couldn't set default key"); + return ret; + } + + return 0; +} + +int wl12xx_hw_init_templates_config(struct wl12xx *wl) +{ + int ret; + u8 partial_vbm[PARTIAL_VBM_MAX]; + + /* send empty templates for fw memory reservation */ + ret = wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, NULL, + sizeof(struct wl12xx_probe_req_template)); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_template_set(wl, CMD_NULL_DATA, NULL, + sizeof(struct wl12xx_null_data_template)); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_template_set(wl, CMD_PS_POLL, NULL, + sizeof(struct wl12xx_ps_poll_template)); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL, + sizeof + (struct wl12xx_qos_null_data_template)); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, NULL, + sizeof + (struct wl12xx_probe_resp_template)); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_template_set(wl, CMD_BEACON, NULL, + sizeof + (struct wl12xx_beacon_template)); + if (ret < 0) + return ret; + + /* tim templates, first reserve space then allocate an empty one */ + memset(partial_vbm, 0, PARTIAL_VBM_MAX); + ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter) +{ + int ret; + + ret = wl12xx_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF); + if (ret < 0) + return ret; + + ret = wl12xx_acx_rx_config(wl, config, filter); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_hw_init_phy_config(struct wl12xx *wl) +{ + int ret; + + ret = wl12xx_acx_pd_threshold(wl); + if (ret < 0) + return ret; + + ret = wl12xx_acx_slot(wl, DEFAULT_SLOT_TIME); + if (ret < 0) + return ret; + + ret = wl12xx_acx_group_address_tbl(wl); + if (ret < 0) + return ret; + + ret = wl12xx_acx_service_period_timeout(wl); + if (ret < 0) + return ret; + + ret = wl12xx_acx_rts_threshold(wl, RTS_THRESHOLD_DEF); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_hw_init_beacon_filter(struct wl12xx *wl) +{ + int ret; + + ret = wl12xx_acx_beacon_filter_opt(wl); + if (ret < 0) + return ret; + + ret = wl12xx_acx_beacon_filter_table(wl); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_hw_init_pta(struct wl12xx *wl) +{ + int ret; + + ret = wl12xx_acx_sg_enable(wl); + if (ret < 0) + return ret; + + ret = wl12xx_acx_sg_cfg(wl); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_hw_init_energy_detection(struct wl12xx *wl) +{ + int ret; + + ret = wl12xx_acx_cca_threshold(wl); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl) +{ + int ret; + + ret = wl12xx_acx_bcn_dtim_options(wl); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_hw_init_power_auth(struct wl12xx *wl) +{ + return wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM); +} diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h new file mode 100644 index 000000000000..c8b6cd0b7c3e --- /dev/null +++ b/drivers/net/wireless/wl12xx/init.h @@ -0,0 +1,40 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_INIT_H__ +#define __WL12XX_INIT_H__ + +#include "wl12xx.h" + +int wl12xx_hw_init_hwenc_config(struct wl12xx *wl); +int wl12xx_hw_init_templates_config(struct wl12xx *wl); +int wl12xx_hw_init_mem_config(struct wl12xx *wl); +int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter); +int wl12xx_hw_init_phy_config(struct wl12xx *wl); +int wl12xx_hw_init_beacon_filter(struct wl12xx *wl); +int wl12xx_hw_init_pta(struct wl12xx *wl); +int wl12xx_hw_init_energy_detection(struct wl12xx *wl); +int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl); +int wl12xx_hw_init_power_auth(struct wl12xx *wl); + +#endif diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c new file mode 100644 index 000000000000..744f4ce5993b --- /dev/null +++ b/drivers/net/wireless/wl12xx/main.c @@ -0,0 +1,1358 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "reg.h" +#include "wl1251.h" +#include "spi.h" +#include "event.h" +#include "tx.h" +#include "rx.h" +#include "ps.h" +#include "init.h" +#include "debugfs.h" + +static void wl12xx_disable_interrupts(struct wl12xx *wl) +{ + disable_irq(wl->irq); +} + +static void wl12xx_power_off(struct wl12xx *wl) +{ + wl->set_power(false); +} + +static void wl12xx_power_on(struct wl12xx *wl) +{ + wl->set_power(true); +} + +static irqreturn_t wl12xx_irq(int irq, void *cookie) +{ + struct wl12xx *wl; + + wl12xx_debug(DEBUG_IRQ, "IRQ"); + + wl = cookie; + + schedule_work(&wl->irq_work); + + return IRQ_HANDLED; +} + +static int wl12xx_fetch_firmware(struct wl12xx *wl) +{ + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, wl->chip.fw_filename, &wl->spi->dev); + + if (ret < 0) { + wl12xx_error("could not get firmware: %d", ret); + return ret; + } + + if (fw->size % 4) { + wl12xx_error("firmware size is not multiple of 32 bits: %d", + fw->size); + ret = -EILSEQ; + goto out; + } + + wl->fw_len = fw->size; + wl->fw = kmalloc(wl->fw_len, GFP_KERNEL); + + if (!wl->fw) { + wl12xx_error("could not allocate memory for the firmware"); + ret = -ENOMEM; + goto out; + } + + memcpy(wl->fw, fw->data, wl->fw_len); + + ret = 0; + +out: + release_firmware(fw); + + return ret; +} + +static int wl12xx_fetch_nvs(struct wl12xx *wl) +{ + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, wl->chip.nvs_filename, &wl->spi->dev); + + if (ret < 0) { + wl12xx_error("could not get nvs file: %d", ret); + return ret; + } + + if (fw->size % 4) { + wl12xx_error("nvs size is not multiple of 32 bits: %d", + fw->size); + ret = -EILSEQ; + goto out; + } + + wl->nvs_len = fw->size; + wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL); + + if (!wl->nvs) { + wl12xx_error("could not allocate memory for the nvs file"); + ret = -ENOMEM; + goto out; + } + + memcpy(wl->nvs, fw->data, wl->nvs_len); + + ret = 0; + +out: + release_firmware(fw); + + return ret; +} + +static void wl12xx_fw_wakeup(struct wl12xx *wl) +{ + u32 elp_reg; + + elp_reg = ELPCTRL_WAKE_UP; + wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); + elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR); + + if (!(elp_reg & ELPCTRL_WLAN_READY)) { + wl12xx_warning("WLAN not ready"); + elp_reg = ELPCTRL_WAKE_UP_WLAN_READY; + wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); + } +} + +static int wl12xx_chip_wakeup(struct wl12xx *wl) +{ + int ret = 0; + + wl12xx_power_on(wl); + msleep(wl->chip.power_on_sleep); + wl12xx_spi_reset(wl); + wl12xx_spi_init(wl); + + /* We don't need a real memory partition here, because we only want + * to use the registers at this point. */ + wl12xx_set_partition(wl, + 0x00000000, + 0x00000000, + REGISTERS_BASE, + REGISTERS_DOWN_SIZE); + + /* ELP module wake up */ + wl12xx_fw_wakeup(wl); + + /* whal_FwCtrl_BootSm() */ + + /* 0. read chip id from CHIP_ID */ + wl->chip.id = wl12xx_reg_read32(wl, CHIP_ID_B); + + /* 1. check if chip id is valid */ + + switch (wl->chip.id) { + case CHIP_ID_1251_PG12: + wl12xx_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)", + wl->chip.id); + + wl1251_setup(wl); + + break; + case CHIP_ID_1271_PG10: + case CHIP_ID_1251_PG10: + case CHIP_ID_1251_PG11: + default: + wl12xx_error("unsupported chip id: 0x%x", wl->chip.id); + ret = -ENODEV; + goto out; + } + + if (wl->fw == NULL) { + ret = wl12xx_fetch_firmware(wl); + if (ret < 0) + goto out; + } + + /* No NVS from netlink, try to get it from the filesystem */ + if (wl->nvs == NULL) { + ret = wl12xx_fetch_nvs(wl); + if (ret < 0) + goto out; + } + +out: + return ret; +} + +static void wl12xx_filter_work(struct work_struct *work) +{ + struct wl12xx *wl = + container_of(work, struct wl12xx, filter_work); + int ret; + + mutex_lock(&wl->mutex); + + if (wl->state == WL12XX_STATE_OFF) + goto out; + + ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0); + if (ret < 0) + goto out; + +out: + mutex_unlock(&wl->mutex); +} + +int wl12xx_plt_start(struct wl12xx *wl) +{ + int ret; + + wl12xx_notice("power up"); + + if (wl->state != WL12XX_STATE_OFF) { + wl12xx_error("cannot go into PLT state because not " + "in off state: %d", wl->state); + return -EBUSY; + } + + wl->state = WL12XX_STATE_PLT; + + ret = wl12xx_chip_wakeup(wl); + if (ret < 0) + return ret; + + ret = wl->chip.op_boot(wl); + if (ret < 0) + return ret; + + wl12xx_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver); + + ret = wl->chip.op_plt_init(wl); + if (ret < 0) + return ret; + + return 0; +} + +int wl12xx_plt_stop(struct wl12xx *wl) +{ + wl12xx_notice("power down"); + + if (wl->state != WL12XX_STATE_PLT) { + wl12xx_error("cannot power down because not in PLT " + "state: %d", wl->state); + return -EBUSY; + } + + wl12xx_disable_interrupts(wl); + wl12xx_power_off(wl); + + wl->state = WL12XX_STATE_OFF; + + return 0; +} + + +static int wl12xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct wl12xx *wl = hw->priv; + + skb_queue_tail(&wl->tx_queue, skb); + + schedule_work(&wl->tx_work); + + /* + * The workqueue is slow to process the tx_queue and we need stop + * the queue here, otherwise the queue will get too long. + */ + if (skb_queue_len(&wl->tx_queue) >= WL12XX_TX_QUEUE_MAX_LENGTH) { + ieee80211_stop_queues(wl->hw); + + /* + * FIXME: this is racy, the variable is not properly + * protected. Maybe fix this by removing the stupid + * variable altogether and checking the real queue state? + */ + wl->tx_queue_stopped = true; + } + + return NETDEV_TX_OK; +} + +static int wl12xx_op_start(struct ieee80211_hw *hw) +{ + struct wl12xx *wl = hw->priv; + int ret = 0; + + wl12xx_debug(DEBUG_MAC80211, "mac80211 start"); + + mutex_lock(&wl->mutex); + + if (wl->state != WL12XX_STATE_OFF) { + wl12xx_error("cannot start because not in off state: %d", + wl->state); + ret = -EBUSY; + goto out; + } + + ret = wl12xx_chip_wakeup(wl); + if (ret < 0) + return ret; + + ret = wl->chip.op_boot(wl); + if (ret < 0) + goto out; + + ret = wl->chip.op_hw_init(wl); + if (ret < 0) + goto out; + + ret = wl12xx_acx_station_id(wl); + if (ret < 0) + goto out; + + wl->state = WL12XX_STATE_ON; + + wl12xx_info("firmware booted (%s)", wl->chip.fw_ver); + +out: + if (ret < 0) + wl12xx_power_off(wl); + + mutex_unlock(&wl->mutex); + + return ret; +} + +static void wl12xx_op_stop(struct ieee80211_hw *hw) +{ + struct wl12xx *wl = hw->priv; + + wl12xx_info("down"); + + wl12xx_debug(DEBUG_MAC80211, "mac80211 stop"); + + mutex_lock(&wl->mutex); + + WARN_ON(wl->state != WL12XX_STATE_ON); + + if (wl->scanning) { + mutex_unlock(&wl->mutex); + ieee80211_scan_completed(wl->hw, true); + mutex_lock(&wl->mutex); + wl->scanning = false; + } + + wl->state = WL12XX_STATE_OFF; + + wl12xx_disable_interrupts(wl); + + mutex_unlock(&wl->mutex); + + cancel_work_sync(&wl->irq_work); + cancel_work_sync(&wl->tx_work); + cancel_work_sync(&wl->filter_work); + + mutex_lock(&wl->mutex); + + /* let's notify MAC80211 about the remaining pending TX frames */ + wl12xx_tx_flush(wl); + + wl12xx_power_off(wl); + + memset(wl->bssid, 0, ETH_ALEN); + wl->listen_int = 1; + wl->bss_type = MAX_BSS_TYPE; + + wl->data_in_count = 0; + wl->rx_counter = 0; + wl->rx_handled = 0; + wl->rx_current_buffer = 0; + wl->rx_last_id = 0; + wl->next_tx_complete = 0; + wl->elp = false; + wl->psm = 0; + wl->tx_queue_stopped = false; + wl->power_level = WL12XX_DEFAULT_POWER_LEVEL; + + wl12xx_debugfs_reset(wl); + + mutex_unlock(&wl->mutex); +} + +static int wl12xx_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct wl12xx *wl = hw->priv; + DECLARE_MAC_BUF(mac); + int ret = 0; + + wl12xx_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %s", + conf->type, print_mac(mac, conf->mac_addr)); + + mutex_lock(&wl->mutex); + + switch (conf->type) { + case NL80211_IFTYPE_STATION: + wl->bss_type = BSS_TYPE_STA_BSS; + break; + case NL80211_IFTYPE_ADHOC: + wl->bss_type = BSS_TYPE_IBSS; + break; + default: + ret = -EOPNOTSUPP; + goto out; + } + + if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) { + memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN); + SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); + ret = wl12xx_acx_station_id(wl); + if (ret < 0) + goto out; + } + +out: + mutex_unlock(&wl->mutex); + return ret; +} + +static void wl12xx_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + wl12xx_debug(DEBUG_MAC80211, "mac80211 remove interface"); +} + +static int wl12xx_build_null_data(struct wl12xx *wl) +{ + struct wl12xx_null_data_template template; + + if (!is_zero_ether_addr(wl->bssid)) { + memcpy(template.header.da, wl->bssid, ETH_ALEN); + memcpy(template.header.bssid, wl->bssid, ETH_ALEN); + } else { + memset(template.header.da, 0xff, ETH_ALEN); + memset(template.header.bssid, 0xff, ETH_ALEN); + } + + memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); + template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA | + IEEE80211_STYPE_NULLFUNC); + + return wl12xx_cmd_template_set(wl, CMD_NULL_DATA, &template, + sizeof(template)); + +} + +static int wl12xx_build_ps_poll(struct wl12xx *wl, u16 aid) +{ + struct wl12xx_ps_poll_template template; + + memcpy(template.bssid, wl->bssid, ETH_ALEN); + memcpy(template.ta, wl->mac_addr, ETH_ALEN); + template.aid = aid; + template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); + + return wl12xx_cmd_template_set(wl, CMD_PS_POLL, &template, + sizeof(template)); + +} + +static int wl12xx_op_config(struct ieee80211_hw *hw, u32 changed) +{ + struct wl12xx *wl = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + int channel, ret = 0; + + channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + + wl12xx_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d", + channel, + conf->flags & IEEE80211_CONF_PS ? "on" : "off", + conf->power_level); + + mutex_lock(&wl->mutex); + + if (channel != wl->channel) { + /* FIXME: use beacon interval provided by mac80211 */ + ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0); + if (ret < 0) + goto out; + + wl->channel = channel; + } + + ret = wl12xx_build_null_data(wl); + if (ret < 0) + goto out; + + if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) { + wl12xx_info("psm enabled"); + + wl->psm_requested = true; + + /* + * We enter PSM only if we're already associated. + * If we're not, we'll enter it when joining an SSID, + * through the bss_info_changed() hook. + */ + ret = wl12xx_ps_set_mode(wl, STATION_POWER_SAVE_MODE); + } else if (!(conf->flags & IEEE80211_CONF_PS) && + wl->psm_requested) { + wl12xx_info("psm disabled"); + + wl->psm_requested = false; + + if (wl->psm) + ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE); + } + + if (conf->power_level != wl->power_level) { + ret = wl12xx_acx_tx_power(wl, conf->power_level); + if (ret < 0) + goto out; + + wl->power_level = conf->power_level; + } + +out: + mutex_unlock(&wl->mutex); + return ret; +} + +#define WL12XX_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \ + FIF_ALLMULTI | \ + FIF_FCSFAIL | \ + FIF_BCN_PRBRESP_PROMISC | \ + FIF_CONTROL | \ + FIF_OTHER_BSS) + +static void wl12xx_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed, + unsigned int *total, + int mc_count, + struct dev_addr_list *mc_list) +{ + struct wl12xx *wl = hw->priv; + + wl12xx_debug(DEBUG_MAC80211, "mac80211 configure filter"); + + *total &= WL12XX_SUPPORTED_FILTERS; + changed &= WL12XX_SUPPORTED_FILTERS; + + if (changed == 0) + /* no filters which we support changed */ + return; + + /* FIXME: wl->rx_config and wl->rx_filter are not protected */ + + wl->rx_config = WL12XX_DEFAULT_RX_CONFIG; + wl->rx_filter = WL12XX_DEFAULT_RX_FILTER; + + if (*total & FIF_PROMISC_IN_BSS) { + wl->rx_config |= CFG_BSSID_FILTER_EN; + wl->rx_config |= CFG_RX_ALL_GOOD; + } + if (*total & FIF_ALLMULTI) + /* + * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive + * all multicast frames + */ + wl->rx_config &= ~CFG_MC_FILTER_EN; + if (*total & FIF_FCSFAIL) + wl->rx_filter |= CFG_RX_FCS_ERROR; + if (*total & FIF_BCN_PRBRESP_PROMISC) { + wl->rx_config &= ~CFG_BSSID_FILTER_EN; + wl->rx_config &= ~CFG_SSID_FILTER_EN; + } + if (*total & FIF_CONTROL) + wl->rx_filter |= CFG_RX_CTL_EN; + if (*total & FIF_OTHER_BSS) + wl->rx_filter &= ~CFG_BSSID_FILTER_EN; + + /* + * FIXME: workqueues need to be properly cancelled on stop(), for + * now let's just disable changing the filter settings. They will + * be updated any on config(). + */ + /* schedule_work(&wl->filter_work); */ +} + +/* HW encryption */ +static int wl12xx_set_key_type(struct wl12xx *wl, struct acx_set_key *key, + enum set_key_cmd cmd, + struct ieee80211_key_conf *mac80211_key, + const u8 *addr) +{ + switch (mac80211_key->alg) { + case ALG_WEP: + if (is_broadcast_ether_addr(addr)) + key->key_type = KEY_WEP_DEFAULT; + else + key->key_type = KEY_WEP_ADDR; + + mac80211_key->hw_key_idx = mac80211_key->keyidx; + break; + case ALG_TKIP: + if (is_broadcast_ether_addr(addr)) + key->key_type = KEY_TKIP_MIC_GROUP; + else + key->key_type = KEY_TKIP_MIC_PAIRWISE; + + mac80211_key->hw_key_idx = mac80211_key->keyidx; + break; + case ALG_CCMP: + if (is_broadcast_ether_addr(addr)) + key->key_type = KEY_AES_GROUP; + else + key->key_type = KEY_AES_PAIRWISE; + mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + break; + default: + wl12xx_error("Unknown key algo 0x%x", mac80211_key->alg); + return -EOPNOTSUPP; + } + + return 0; +} + +static int wl12xx_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct wl12xx *wl = hw->priv; + struct acx_set_key wl_key; + const u8 *addr; + int ret; + + static const u8 bcast_addr[ETH_ALEN] = + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + + wl12xx_debug(DEBUG_MAC80211, "mac80211 set key"); + + memset(&wl_key, 0, sizeof(wl_key)); + + addr = sta ? sta->addr : bcast_addr; + + wl12xx_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd); + wl12xx_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN); + wl12xx_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x", + key->alg, key->keyidx, key->keylen, key->flags); + wl12xx_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen); + + mutex_lock(&wl->mutex); + + switch (cmd) { + case SET_KEY: + wl_key.key_action = KEY_ADD_OR_REPLACE; + break; + case DISABLE_KEY: + wl_key.key_action = KEY_REMOVE; + break; + default: + wl12xx_error("Unsupported key cmd 0x%x", cmd); + break; + } + + ret = wl12xx_set_key_type(wl, &wl_key, cmd, key, addr); + if (ret < 0) { + wl12xx_error("Set KEY type failed"); + goto out; + } + + if (wl_key.key_type != KEY_WEP_DEFAULT) + memcpy(wl_key.addr, addr, ETH_ALEN); + + if ((wl_key.key_type == KEY_TKIP_MIC_GROUP) || + (wl_key.key_type == KEY_TKIP_MIC_PAIRWISE)) { + /* + * We get the key in the following form: + * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) + * but the target is expecting: + * TKIP - RX MIC - TX MIC + */ + memcpy(wl_key.key, key->key, 16); + memcpy(wl_key.key + 16, key->key + 24, 8); + memcpy(wl_key.key + 24, key->key + 16, 8); + + } else { + memcpy(wl_key.key, key->key, key->keylen); + } + wl_key.key_size = key->keylen; + + wl_key.id = key->keyidx; + wl_key.ssid_profile = 0; + + wl12xx_dump(DEBUG_CRYPT, "TARGET KEY: ", &wl_key, sizeof(wl_key)); + + if (wl12xx_cmd_send(wl, CMD_SET_KEYS, &wl_key, sizeof(wl_key)) < 0) { + wl12xx_error("Set KEY failed"); + ret = -EOPNOTSUPP; + goto out; + } + +out: + mutex_unlock(&wl->mutex); + return ret; +} + +static int wl12xx_build_basic_rates(char *rates) +{ + u8 index = 0; + + rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB; + rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB; + rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB; + rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB; + + return index; +} + +static int wl12xx_build_extended_rates(char *rates) +{ + u8 index = 0; + + rates[index++] = IEEE80211_OFDM_RATE_6MB; + rates[index++] = IEEE80211_OFDM_RATE_9MB; + rates[index++] = IEEE80211_OFDM_RATE_12MB; + rates[index++] = IEEE80211_OFDM_RATE_18MB; + rates[index++] = IEEE80211_OFDM_RATE_24MB; + rates[index++] = IEEE80211_OFDM_RATE_36MB; + rates[index++] = IEEE80211_OFDM_RATE_48MB; + rates[index++] = IEEE80211_OFDM_RATE_54MB; + + return index; +} + + +static int wl12xx_build_probe_req(struct wl12xx *wl, u8 *ssid, size_t ssid_len) +{ + struct wl12xx_probe_req_template template; + struct wl12xx_ie_rates *rates; + char *ptr; + u16 size; + + ptr = (char *)&template; + size = sizeof(struct ieee80211_header); + + memset(template.header.da, 0xff, ETH_ALEN); + memset(template.header.bssid, 0xff, ETH_ALEN); + memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); + template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); + + /* IEs */ + /* SSID */ + template.ssid.header.id = WLAN_EID_SSID; + template.ssid.header.len = ssid_len; + if (ssid_len && ssid) + memcpy(template.ssid.ssid, ssid, ssid_len); + size += sizeof(struct wl12xx_ie_header) + ssid_len; + ptr += size; + + /* Basic Rates */ + rates = (struct wl12xx_ie_rates *)ptr; + rates->header.id = WLAN_EID_SUPP_RATES; + rates->header.len = wl12xx_build_basic_rates(rates->rates); + size += sizeof(struct wl12xx_ie_header) + rates->header.len; + ptr += sizeof(struct wl12xx_ie_header) + rates->header.len; + + /* Extended rates */ + rates = (struct wl12xx_ie_rates *)ptr; + rates->header.id = WLAN_EID_EXT_SUPP_RATES; + rates->header.len = wl12xx_build_extended_rates(rates->rates); + size += sizeof(struct wl12xx_ie_header) + rates->header.len; + + wl12xx_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size); + + return wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, &template, + size); +} + +static int wl12xx_hw_scan(struct wl12xx *wl, u8 *ssid, size_t len, + u8 active_scan, u8 high_prio, u8 num_channels, + u8 probe_requests) +{ + int i, ret; + u32 split_scan = 0; + u16 scan_options = 0; + struct cmd_scan *params; + struct wl12xx_command *cmd_answer; + + if (wl->scanning) + return -EINVAL; + + params = kzalloc(sizeof(*params), GFP_KERNEL); + if (!params) + return -ENOMEM; + + params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); + params->params.rx_filter_options = + cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN); + + /* High priority scan */ + if (!active_scan) + scan_options |= SCAN_PASSIVE; + if (high_prio) + scan_options |= SCAN_PRIORITY_HIGH; + params->params.scan_options = scan_options; + + params->params.num_channels = num_channels; + params->params.num_probe_requests = probe_requests; + params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */ + params->params.tid_trigger = 0; + + for (i = 0; i < num_channels; i++) { + params->channels[i].min_duration = cpu_to_le32(30000); + params->channels[i].max_duration = cpu_to_le32(60000); + memset(¶ms->channels[i].bssid_lsb, 0xff, 4); + memset(¶ms->channels[i].bssid_msb, 0xff, 2); + params->channels[i].early_termination = 0; + params->channels[i].tx_power_att = 0; + params->channels[i].channel = i + 1; + memset(params->channels[i].pad, 0, 3); + } + + for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++) + memset(¶ms->channels[i], 0, + sizeof(struct basic_scan_channel_parameters)); + + if (len && ssid) { + params->params.ssid_len = len; + memcpy(params->params.ssid, ssid, len); + } else { + params->params.ssid_len = 0; + memset(params->params.ssid, 0, 32); + } + + ret = wl12xx_build_probe_req(wl, ssid, len); + if (ret < 0) { + wl12xx_error("PROBE request template failed"); + goto out; + } + + ret = wl12xx_cmd_send(wl, CMD_TRIGGER_SCAN_TO, &split_scan, + sizeof(u32)); + if (ret < 0) { + wl12xx_error("Split SCAN failed"); + goto out; + } + + wl12xx_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params)); + + wl->scanning = true; + + ret = wl12xx_cmd_send(wl, CMD_SCAN, params, sizeof(*params)); + if (ret < 0) + wl12xx_error("SCAN failed"); + + wl12xx_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params)); + + cmd_answer = (struct wl12xx_command *) params; + if (cmd_answer->status != CMD_STATUS_SUCCESS) { + wl12xx_error("TEST command answer error: %d", + cmd_answer->status); + wl->scanning = false; + ret = -EIO; + goto out; + } + +out: + kfree(params); + return ret; + +} + +static int wl12xx_op_hw_scan(struct ieee80211_hw *hw, + struct cfg80211_scan_request *req) +{ + struct wl12xx *wl = hw->priv; + int ret; + u8 *ssid = NULL; + size_t ssid_len = 0; + + wl12xx_debug(DEBUG_MAC80211, "mac80211 hw scan"); + + if (req->n_ssids) { + ssid = req->ssids[0].ssid; + ssid_len = req->ssids[0].ssid_len; + } + + mutex_lock(&wl->mutex); + ret = wl12xx_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3); + mutex_unlock(&wl->mutex); + + return ret; +} + +static int wl12xx_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct wl12xx *wl = hw->priv; + int ret; + + ret = wl12xx_acx_rts_threshold(wl, (u16) value); + + if (ret < 0) + wl12xx_warning("wl12xx_op_set_rts_threshold failed: %d", ret); + + return ret; +} + +static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + enum acx_ps_mode mode; + struct wl12xx *wl = hw->priv; + struct sk_buff *beacon; + int ret; + + wl12xx_debug(DEBUG_MAC80211, "mac80211 bss info changed"); + + mutex_lock(&wl->mutex); + + if (changed & BSS_CHANGED_ASSOC) { + if (bss_conf->assoc) { + wl->aid = bss_conf->aid; + + ret = wl12xx_build_ps_poll(wl, wl->aid); + if (ret < 0) + goto out; + + ret = wl12xx_acx_aid(wl, wl->aid); + if (ret < 0) + goto out; + + /* If we want to go in PSM but we're not there yet */ + if (wl->psm_requested && !wl->psm) { + mode = STATION_POWER_SAVE_MODE; + ret = wl12xx_ps_set_mode(wl, mode); + if (ret < 0) + goto out; + } + } + } + if (changed & BSS_CHANGED_ERP_SLOT) { + if (bss_conf->use_short_slot) + ret = wl12xx_acx_slot(wl, SLOT_TIME_SHORT); + else + ret = wl12xx_acx_slot(wl, SLOT_TIME_LONG); + if (ret < 0) { + wl12xx_warning("Set slot time failed %d", ret); + goto out; + } + } + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + if (bss_conf->use_short_preamble) + wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_SHORT); + else + wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_LONG); + } + + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + if (bss_conf->use_cts_prot) + ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_ENABLE); + else + ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_DISABLE); + if (ret < 0) { + wl12xx_warning("Set ctsprotect failed %d", ret); + goto out; + } + } + + if (changed & BSS_CHANGED_BSSID) { + memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN); + + ret = wl12xx_build_null_data(wl); + if (ret < 0) + goto out; + + if (wl->bss_type != BSS_TYPE_IBSS) { + ret = wl12xx_cmd_join(wl, wl->bss_type, 5, 100, 1); + if (ret < 0) + goto out; + } + } + + if (changed & BSS_CHANGED_BEACON) { + beacon = ieee80211_beacon_get(hw, vif); + ret = wl12xx_cmd_template_set(wl, CMD_BEACON, beacon->data, + beacon->len); + + if (ret < 0) { + dev_kfree_skb(beacon); + goto out; + } + + ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data, + beacon->len); + + dev_kfree_skb(beacon); + + if (ret < 0) + goto out; + + ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0); + + if (ret < 0) + goto out; + } + +out: + mutex_unlock(&wl->mutex); +} + + +/* can't be const, mac80211 writes to this */ +static struct ieee80211_rate wl12xx_rates[] = { + { .bitrate = 10, + .hw_value = 0x1, + .hw_value_short = 0x1, }, + { .bitrate = 20, + .hw_value = 0x2, + .hw_value_short = 0x2, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = 0x4, + .hw_value_short = 0x4, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = 0x20, + .hw_value_short = 0x20, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = 0x8, + .hw_value_short = 0x8, }, + { .bitrate = 90, + .hw_value = 0x10, + .hw_value_short = 0x10, }, + { .bitrate = 120, + .hw_value = 0x40, + .hw_value_short = 0x40, }, + { .bitrate = 180, + .hw_value = 0x80, + .hw_value_short = 0x80, }, + { .bitrate = 240, + .hw_value = 0x200, + .hw_value_short = 0x200, }, + { .bitrate = 360, + .hw_value = 0x400, + .hw_value_short = 0x400, }, + { .bitrate = 480, + .hw_value = 0x800, + .hw_value_short = 0x800, }, + { .bitrate = 540, + .hw_value = 0x1000, + .hw_value_short = 0x1000, }, +}; + +/* can't be const, mac80211 writes to this */ +static struct ieee80211_channel wl12xx_channels[] = { + { .hw_value = 1, .center_freq = 2412}, + { .hw_value = 2, .center_freq = 2417}, + { .hw_value = 3, .center_freq = 2422}, + { .hw_value = 4, .center_freq = 2427}, + { .hw_value = 5, .center_freq = 2432}, + { .hw_value = 6, .center_freq = 2437}, + { .hw_value = 7, .center_freq = 2442}, + { .hw_value = 8, .center_freq = 2447}, + { .hw_value = 9, .center_freq = 2452}, + { .hw_value = 10, .center_freq = 2457}, + { .hw_value = 11, .center_freq = 2462}, + { .hw_value = 12, .center_freq = 2467}, + { .hw_value = 13, .center_freq = 2472}, +}; + +/* can't be const, mac80211 writes to this */ +static struct ieee80211_supported_band wl12xx_band_2ghz = { + .channels = wl12xx_channels, + .n_channels = ARRAY_SIZE(wl12xx_channels), + .bitrates = wl12xx_rates, + .n_bitrates = ARRAY_SIZE(wl12xx_rates), +}; + +static const struct ieee80211_ops wl12xx_ops = { + .start = wl12xx_op_start, + .stop = wl12xx_op_stop, + .add_interface = wl12xx_op_add_interface, + .remove_interface = wl12xx_op_remove_interface, + .config = wl12xx_op_config, + .configure_filter = wl12xx_op_configure_filter, + .tx = wl12xx_op_tx, + .set_key = wl12xx_op_set_key, + .hw_scan = wl12xx_op_hw_scan, + .bss_info_changed = wl12xx_op_bss_info_changed, + .set_rts_threshold = wl12xx_op_set_rts_threshold, +}; + +static int wl12xx_register_hw(struct wl12xx *wl) +{ + int ret; + + if (wl->mac80211_registered) + return 0; + + SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); + + ret = ieee80211_register_hw(wl->hw); + if (ret < 0) { + wl12xx_error("unable to register mac80211 hw: %d", ret); + return ret; + } + + wl->mac80211_registered = true; + + wl12xx_notice("loaded"); + + return 0; +} + +static int wl12xx_init_ieee80211(struct wl12xx *wl) +{ + /* The tx descriptor buffer and the TKIP space */ + wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc) + + WL12XX_TKIP_IV_SPACE; + + /* unit us */ + /* FIXME: find a proper value */ + wl->hw->channel_change_time = 10000; + + wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_NOISE_DBM; + + wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + wl->hw->wiphy->max_scan_ssids = 1; + wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl12xx_band_2ghz; + + SET_IEEE80211_DEV(wl->hw, &wl->spi->dev); + + return 0; +} + +#define WL12XX_DEFAULT_CHANNEL 1 +static int __devinit wl12xx_probe(struct spi_device *spi) +{ + struct wl12xx_platform_data *pdata; + struct ieee80211_hw *hw; + struct wl12xx *wl; + int ret, i; + static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf}; + + pdata = spi->dev.platform_data; + if (!pdata) { + wl12xx_error("no platform data"); + return -ENODEV; + } + + hw = ieee80211_alloc_hw(sizeof(*wl), &wl12xx_ops); + if (!hw) { + wl12xx_error("could not alloc ieee80211_hw"); + return -ENOMEM; + } + + wl = hw->priv; + memset(wl, 0, sizeof(*wl)); + + wl->hw = hw; + dev_set_drvdata(&spi->dev, wl); + wl->spi = spi; + + wl->data_in_count = 0; + + skb_queue_head_init(&wl->tx_queue); + + INIT_WORK(&wl->tx_work, wl12xx_tx_work); + INIT_WORK(&wl->filter_work, wl12xx_filter_work); + wl->channel = WL12XX_DEFAULT_CHANNEL; + wl->scanning = false; + wl->default_key = 0; + wl->listen_int = 1; + wl->rx_counter = 0; + wl->rx_handled = 0; + wl->rx_current_buffer = 0; + wl->rx_last_id = 0; + wl->rx_config = WL12XX_DEFAULT_RX_CONFIG; + wl->rx_filter = WL12XX_DEFAULT_RX_FILTER; + wl->elp = false; + wl->psm = 0; + wl->psm_requested = false; + wl->tx_queue_stopped = false; + wl->power_level = WL12XX_DEFAULT_POWER_LEVEL; + + /* We use the default power on sleep time until we know which chip + * we're using */ + wl->chip.power_on_sleep = WL12XX_DEFAULT_POWER_ON_SLEEP; + + for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++) + wl->tx_frames[i] = NULL; + + wl->next_tx_complete = 0; + + /* + * In case our MAC address is not correctly set, + * we use a random but Nokia MAC. + */ + memcpy(wl->mac_addr, nokia_oui, 3); + get_random_bytes(wl->mac_addr + 3, 3); + + wl->state = WL12XX_STATE_OFF; + mutex_init(&wl->mutex); + + wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE; + wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE; + + /* This is the only SPI value that we need to set here, the rest + * comes from the board-peripherals file */ + spi->bits_per_word = 32; + + ret = spi_setup(spi); + if (ret < 0) { + wl12xx_error("spi_setup failed"); + goto out_free; + } + + wl->set_power = pdata->set_power; + if (!wl->set_power) { + wl12xx_error("set power function missing in platform data"); + return -ENODEV; + } + + wl->irq = spi->irq; + if (wl->irq < 0) { + wl12xx_error("irq missing in platform data"); + return -ENODEV; + } + + ret = request_irq(wl->irq, wl12xx_irq, 0, DRIVER_NAME, wl); + if (ret < 0) { + wl12xx_error("request_irq() failed: %d", ret); + goto out_free; + } + + set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); + + disable_irq(wl->irq); + + ret = wl12xx_init_ieee80211(wl); + if (ret) + goto out_irq; + + ret = wl12xx_register_hw(wl); + if (ret) + goto out_irq; + + wl12xx_debugfs_init(wl); + + wl12xx_notice("initialized"); + + return 0; + + out_irq: + free_irq(wl->irq, wl); + + out_free: + ieee80211_free_hw(hw); + + return ret; +} + +static int __devexit wl12xx_remove(struct spi_device *spi) +{ + struct wl12xx *wl = dev_get_drvdata(&spi->dev); + + ieee80211_unregister_hw(wl->hw); + + wl12xx_debugfs_exit(wl); + + free_irq(wl->irq, wl); + kfree(wl->target_mem_map); + kfree(wl->data_path); + kfree(wl->fw); + wl->fw = NULL; + kfree(wl->nvs); + wl->nvs = NULL; + ieee80211_free_hw(wl->hw); + + return 0; +} + + +static struct spi_driver wl12xx_spi_driver = { + .driver = { + .name = "wl12xx", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = wl12xx_probe, + .remove = __devexit_p(wl12xx_remove), +}; + +static int __init wl12xx_init(void) +{ + int ret; + + ret = spi_register_driver(&wl12xx_spi_driver); + if (ret < 0) { + wl12xx_error("failed to register spi driver: %d", ret); + goto out; + } + +out: + return ret; +} + +static void __exit wl12xx_exit(void) +{ + spi_unregister_driver(&wl12xx_spi_driver); + + wl12xx_notice("unloaded"); +} + +module_init(wl12xx_init); +module_exit(wl12xx_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kalle Valo , " + "Luciano Coelho "); diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c new file mode 100644 index 000000000000..83a10117330b --- /dev/null +++ b/drivers/net/wireless/wl12xx/ps.c @@ -0,0 +1,151 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "reg.h" +#include "ps.h" +#include "spi.h" + +#define WL12XX_WAKEUP_TIMEOUT 2000 + +/* Routines to toggle sleep mode while in ELP */ +void wl12xx_ps_elp_sleep(struct wl12xx *wl) +{ + if (wl->elp || !wl->psm) + return; + + wl12xx_debug(DEBUG_PSM, "chip to elp"); + + wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP); + + wl->elp = true; +} + +int wl12xx_ps_elp_wakeup(struct wl12xx *wl) +{ + unsigned long timeout; + u32 elp_reg; + + if (!wl->elp) + return 0; + + wl12xx_debug(DEBUG_PSM, "waking up chip from elp"); + + timeout = jiffies + msecs_to_jiffies(WL12XX_WAKEUP_TIMEOUT); + + wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP); + + elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR); + + /* + * FIXME: we should wait for irq from chip but, as a temporary + * solution to simplify locking, let's poll instead + */ + while (!(elp_reg & ELPCTRL_WLAN_READY)) { + if (time_after(jiffies, timeout)) { + wl12xx_error("elp wakeup timeout"); + return -ETIMEDOUT; + } + msleep(1); + elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR); + } + + wl12xx_debug(DEBUG_PSM, "wakeup time: %u ms", + jiffies_to_msecs(jiffies) - + (jiffies_to_msecs(timeout) - WL12XX_WAKEUP_TIMEOUT)); + + wl->elp = false; + + return 0; +} + +static int wl12xx_ps_set_elp(struct wl12xx *wl, bool enable) +{ + int ret; + + if (enable) { + wl12xx_debug(DEBUG_PSM, "sleep auth psm/elp"); + + /* + * FIXME: we should PSM_ELP, but because of firmware wakeup + * problems let's use only PSM_PS + */ + ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_PS); + if (ret < 0) + return ret; + + wl12xx_ps_elp_sleep(wl); + } else { + wl12xx_debug(DEBUG_PSM, "sleep auth cam"); + + /* + * When the target is in ELP, we can only + * access the ELP control register. Thus, + * we have to wake the target up before + * changing the power authorization. + */ + + wl12xx_ps_elp_wakeup(wl); + + ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM); + if (ret < 0) + return ret; + } + + return 0; +} + +int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode) +{ + int ret; + + switch (mode) { + case STATION_POWER_SAVE_MODE: + wl12xx_debug(DEBUG_PSM, "entering psm"); + ret = wl12xx_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE); + if (ret < 0) + return ret; + + ret = wl12xx_ps_set_elp(wl, true); + if (ret < 0) + return ret; + + wl->psm = 1; + break; + case STATION_ACTIVE_MODE: + default: + wl12xx_debug(DEBUG_PSM, "leaving psm"); + ret = wl12xx_ps_set_elp(wl, false); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_ps_mode(wl, STATION_ACTIVE_MODE); + if (ret < 0) + return ret; + + wl->psm = 0; + break; + } + + return ret; +} + diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h new file mode 100644 index 000000000000..5d7c52553830 --- /dev/null +++ b/drivers/net/wireless/wl12xx/ps.h @@ -0,0 +1,36 @@ +#ifndef __WL12XX_PS_H__ +#define __WL12XX_PS_H__ + +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "wl12xx.h" +#include "acx.h" + +int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode); +void wl12xx_ps_elp_sleep(struct wl12xx *wl); +int wl12xx_ps_elp_wakeup(struct wl12xx *wl); + + +#endif /* __WL12XX_PS_H__ */ diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h new file mode 100644 index 000000000000..e421643215cd --- /dev/null +++ b/drivers/net/wireless/wl12xx/reg.h @@ -0,0 +1,745 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __REG_H__ +#define __REG_H__ + +#include +#include "wl12xx.h" + +#define REGISTERS_BASE 0x00300000 +#define DRPW_BASE 0x00310000 + +#define REGISTERS_DOWN_SIZE 0x00008800 +#define REGISTERS_WORK_SIZE 0x0000b000 + +#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC + +/* ELP register commands */ +#define ELPCTRL_WAKE_UP 0x1 +#define ELPCTRL_WAKE_UP_WLAN_READY 0x5 +#define ELPCTRL_SLEEP 0x0 +/* ELP WLAN_READY bit */ +#define ELPCTRL_WLAN_READY 0x2 + +/* + * Interrupt registers. + * 64 bit interrupt sources registers ws ced. + * sme interupts were removed and new ones were added. + * Order was changed. + */ +#define FIQ_MASK (REGISTERS_BASE + 0x0400) +#define FIQ_MASK_L (REGISTERS_BASE + 0x0400) +#define FIQ_MASK_H (REGISTERS_BASE + 0x0404) +#define FIQ_MASK_SET (REGISTERS_BASE + 0x0408) +#define FIQ_MASK_SET_L (REGISTERS_BASE + 0x0408) +#define FIQ_MASK_SET_H (REGISTERS_BASE + 0x040C) +#define FIQ_MASK_CLR (REGISTERS_BASE + 0x0410) +#define FIQ_MASK_CLR_L (REGISTERS_BASE + 0x0410) +#define FIQ_MASK_CLR_H (REGISTERS_BASE + 0x0414) +#define IRQ_MASK (REGISTERS_BASE + 0x0418) +#define IRQ_MASK_L (REGISTERS_BASE + 0x0418) +#define IRQ_MASK_H (REGISTERS_BASE + 0x041C) +#define IRQ_MASK_SET (REGISTERS_BASE + 0x0420) +#define IRQ_MASK_SET_L (REGISTERS_BASE + 0x0420) +#define IRQ_MASK_SET_H (REGISTERS_BASE + 0x0424) +#define IRQ_MASK_CLR (REGISTERS_BASE + 0x0428) +#define IRQ_MASK_CLR_L (REGISTERS_BASE + 0x0428) +#define IRQ_MASK_CLR_H (REGISTERS_BASE + 0x042C) +#define ECPU_MASK (REGISTERS_BASE + 0x0448) +#define FIQ_STS_L (REGISTERS_BASE + 0x044C) +#define FIQ_STS_H (REGISTERS_BASE + 0x0450) +#define IRQ_STS_L (REGISTERS_BASE + 0x0454) +#define IRQ_STS_H (REGISTERS_BASE + 0x0458) +#define INT_STS_ND (REGISTERS_BASE + 0x0464) +#define INT_STS_RAW_L (REGISTERS_BASE + 0x0464) +#define INT_STS_RAW_H (REGISTERS_BASE + 0x0468) +#define INT_STS_CLR (REGISTERS_BASE + 0x04B4) +#define INT_STS_CLR_L (REGISTERS_BASE + 0x04B4) +#define INT_STS_CLR_H (REGISTERS_BASE + 0x04B8) +#define INT_ACK (REGISTERS_BASE + 0x046C) +#define INT_ACK_L (REGISTERS_BASE + 0x046C) +#define INT_ACK_H (REGISTERS_BASE + 0x0470) +#define INT_TRIG (REGISTERS_BASE + 0x0474) +#define INT_TRIG_L (REGISTERS_BASE + 0x0474) +#define INT_TRIG_H (REGISTERS_BASE + 0x0478) +#define HOST_STS_L (REGISTERS_BASE + 0x045C) +#define HOST_STS_H (REGISTERS_BASE + 0x0460) +#define HOST_MASK (REGISTERS_BASE + 0x0430) +#define HOST_MASK_L (REGISTERS_BASE + 0x0430) +#define HOST_MASK_H (REGISTERS_BASE + 0x0434) +#define HOST_MASK_SET (REGISTERS_BASE + 0x0438) +#define HOST_MASK_SET_L (REGISTERS_BASE + 0x0438) +#define HOST_MASK_SET_H (REGISTERS_BASE + 0x043C) +#define HOST_MASK_CLR (REGISTERS_BASE + 0x0440) +#define HOST_MASK_CLR_L (REGISTERS_BASE + 0x0440) +#define HOST_MASK_CLR_H (REGISTERS_BASE + 0x0444) + +/* Host Interrupts*/ +#define HINT_MASK (REGISTERS_BASE + 0x0494) +#define HINT_MASK_SET (REGISTERS_BASE + 0x0498) +#define HINT_MASK_CLR (REGISTERS_BASE + 0x049C) +#define HINT_STS_ND_MASKED (REGISTERS_BASE + 0x04A0) +/*1150 spec calls this HINT_STS_RAW*/ +#define HINT_STS_ND (REGISTERS_BASE + 0x04B0) +#define HINT_STS_CLR (REGISTERS_BASE + 0x04A4) +#define HINT_ACK (REGISTERS_BASE + 0x04A8) +#define HINT_TRIG (REGISTERS_BASE + 0x04AC) + +/* Device Configuration registers*/ +#define SOR_CFG (REGISTERS_BASE + 0x0800) +#define ECPU_CTRL (REGISTERS_BASE + 0x0804) +#define HI_CFG (REGISTERS_BASE + 0x0808) +#define EE_START (REGISTERS_BASE + 0x080C) + +#define CHIP_ID_B (REGISTERS_BASE + 0x5674) + +#define CHIP_ID_1251_PG10 (0x7010101) +#define CHIP_ID_1251_PG11 (0x7020101) +#define CHIP_ID_1251_PG12 (0x7030101) + +#define ENABLE (REGISTERS_BASE + 0x5450) + +/* Power Management registers */ +#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804) +#define ELP_CMD (REGISTERS_BASE + 0x5808) +#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810) +#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814) +#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818) + +#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820) + +/* Scratch Pad registers*/ +#define SCR_PAD0 (REGISTERS_BASE + 0x5608) +#define SCR_PAD1 (REGISTERS_BASE + 0x560C) +#define SCR_PAD2 (REGISTERS_BASE + 0x5610) +#define SCR_PAD3 (REGISTERS_BASE + 0x5614) +#define SCR_PAD4 (REGISTERS_BASE + 0x5618) +#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C) +#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620) +#define SCR_PAD5 (REGISTERS_BASE + 0x5624) +#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628) +#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C) +#define SCR_PAD6 (REGISTERS_BASE + 0x5630) +#define SCR_PAD7 (REGISTERS_BASE + 0x5634) +#define SCR_PAD8 (REGISTERS_BASE + 0x5638) +#define SCR_PAD9 (REGISTERS_BASE + 0x563C) + +/* Spare registers*/ +#define SPARE_A1 (REGISTERS_BASE + 0x0994) +#define SPARE_A2 (REGISTERS_BASE + 0x0998) +#define SPARE_A3 (REGISTERS_BASE + 0x099C) +#define SPARE_A4 (REGISTERS_BASE + 0x09A0) +#define SPARE_A5 (REGISTERS_BASE + 0x09A4) +#define SPARE_A6 (REGISTERS_BASE + 0x09A8) +#define SPARE_A7 (REGISTERS_BASE + 0x09AC) +#define SPARE_A8 (REGISTERS_BASE + 0x09B0) +#define SPARE_B1 (REGISTERS_BASE + 0x5420) +#define SPARE_B2 (REGISTERS_BASE + 0x5424) +#define SPARE_B3 (REGISTERS_BASE + 0x5428) +#define SPARE_B4 (REGISTERS_BASE + 0x542C) +#define SPARE_B5 (REGISTERS_BASE + 0x5430) +#define SPARE_B6 (REGISTERS_BASE + 0x5434) +#define SPARE_B7 (REGISTERS_BASE + 0x5438) +#define SPARE_B8 (REGISTERS_BASE + 0x543C) + +enum wl12xx_acx_int_reg { + ACX_REG_INTERRUPT_TRIG, + ACX_REG_INTERRUPT_TRIG_H, + +/*============================================= + Host Interrupt Mask Register - 32bit (RW) + ------------------------------------------ + Setting a bit in this register masks the + corresponding interrupt to the host. + 0 - RX0 - Rx first dubble buffer Data Interrupt + 1 - TXD - Tx Data Interrupt + 2 - TXXFR - Tx Transfer Interrupt + 3 - RX1 - Rx second dubble buffer Data Interrupt + 4 - RXXFR - Rx Transfer Interrupt + 5 - EVENT_A - Event Mailbox interrupt + 6 - EVENT_B - Event Mailbox interrupt + 7 - WNONHST - Wake On Host Interrupt + 8 - TRACE_A - Debug Trace interrupt + 9 - TRACE_B - Debug Trace interrupt + 10 - CDCMP - Command Complete Interrupt + 11 - + 12 - + 13 - + 14 - ICOMP - Initialization Complete Interrupt + 16 - SG SE - Soft Gemini - Sense enable interrupt + 17 - SG SD - Soft Gemini - Sense disable interrupt + 18 - - + 19 - - + 20 - - + 21- - + Default: 0x0001 +*==============================================*/ + ACX_REG_INTERRUPT_MASK, + +/*============================================= + Host Interrupt Mask Set 16bit, (Write only) + ------------------------------------------ + Setting a bit in this register sets + the corresponding bin in ACX_HINT_MASK register + without effecting the mask + state of other bits (0 = no effect). +==============================================*/ + ACX_REG_HINT_MASK_SET, + +/*============================================= + Host Interrupt Mask Clear 16bit,(Write only) + ------------------------------------------ + Setting a bit in this register clears + the corresponding bin in ACX_HINT_MASK register + without effecting the mask + state of other bits (0 = no effect). +=============================================*/ + ACX_REG_HINT_MASK_CLR, + +/*============================================= + Host Interrupt Status Nondestructive Read + 16bit,(Read only) + ------------------------------------------ + The host can read this register to determine + which interrupts are active. + Reading this register doesn't + effect its content. +=============================================*/ + ACX_REG_INTERRUPT_NO_CLEAR, + +/*============================================= + Host Interrupt Status Clear on Read Register + 16bit,(Read only) + ------------------------------------------ + The host can read this register to determine + which interrupts are active. + Reading this register clears it, + thus making all interrupts inactive. +==============================================*/ + ACX_REG_INTERRUPT_CLEAR, + +/*============================================= + Host Interrupt Acknowledge Register + 16bit,(Write only) + ------------------------------------------ + The host can set individual bits in this + register to clear (acknowledge) the corresp. + interrupt status bits in the HINT_STS_CLR and + HINT_STS_ND registers, thus making the + assotiated interrupt inactive. (0-no effect) +==============================================*/ + ACX_REG_INTERRUPT_ACK, + +/*=============================================== + Host Software Reset - 32bit RW + ------------------------------------------ + [31:1] Reserved + 0 SOFT_RESET Soft Reset - When this bit is set, + it holds the Wlan hardware in a soft reset state. + This reset disables all MAC and baseband processor + clocks except the CardBus/PCI interface clock. + It also initializes all MAC state machines except + the host interface. It does not reload the + contents of the EEPROM. When this bit is cleared + (not self-clearing), the Wlan hardware + exits the software reset state. +===============================================*/ + ACX_REG_SLV_SOFT_RESET, + +/*=============================================== + EEPROM Burst Read Start - 32bit RW + ------------------------------------------ + [31:1] Reserved + 0 ACX_EE_START - EEPROM Burst Read Start 0 + Setting this bit starts a burst read from + the external EEPROM. + If this bit is set (after reset) before an EEPROM read/write, + the burst read starts at EEPROM address 0. + Otherwise, it starts at the address + following the address of the previous access. + TheWlan hardware hardware clears this bit automatically. + + Default: 0x00000000 +*================================================*/ + ACX_REG_EE_START, + +/* Embedded ARM CPU Control */ + +/*=============================================== + Halt eCPU - 32bit RW + ------------------------------------------ + 0 HALT_ECPU Halt Embedded CPU - This bit is the + compliment of bit 1 (MDATA2) in the SOR_CFG register. + During a hardware reset, this bit holds + the inverse of MDATA2. + When downloading firmware from the host, + set this bit (pull down MDATA2). + The host clears this bit after downloading the firmware into + zero-wait-state SSRAM. + When loading firmware from Flash, clear this bit (pull up MDATA2) + so that the eCPU can run the bootloader code in Flash + HALT_ECPU eCPU State + -------------------- + 1 halt eCPU + 0 enable eCPU + ===============================================*/ + ACX_REG_ECPU_CONTROL, + + ACX_REG_TABLE_LEN +}; + +#define ACX_SLV_SOFT_RESET_BIT BIT(1) +#define ACX_REG_EEPROM_START_BIT BIT(1) + +/* Command/Information Mailbox Pointers */ + +/*=============================================== + Command Mailbox Pointer - 32bit RW + ------------------------------------------ + This register holds the start address of + the command mailbox located in the Wlan hardware memory. + The host must read this pointer after a reset to + find the location of the command mailbox. + The Wlan hardware initializes the command mailbox + pointer with the default address of the command mailbox. + The command mailbox pointer is not valid until after + the host receives the Init Complete interrupt from + the Wlan hardware. + ===============================================*/ +#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0) + +/*=============================================== + Information Mailbox Pointer - 32bit RW + ------------------------------------------ + This register holds the start address of + the information mailbox located in the Wlan hardware memory. + The host must read this pointer after a reset to find + the location of the information mailbox. + The Wlan hardware initializes the information mailbox pointer + with the default address of the information mailbox. + The information mailbox pointer is not valid + until after the host receives the Init Complete interrupt from + the Wlan hardware. + ===============================================*/ +#define REG_EVENT_MAILBOX_PTR (SCR_PAD1) + + +/* Misc */ + +#define REG_ENABLE_TX_RX (ENABLE) +/* + * Rx configuration (filter) information element + * --------------------------------------------- + */ +#define REG_RX_CONFIG (RX_CFG) +#define REG_RX_FILTER (RX_FILTER_CFG) + + +#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002 + +/* promiscuous - receives all valid frames */ +#define RX_CFG_PROMISCUOUS 0x0008 + +/* receives frames from any BSSID */ +#define RX_CFG_BSSID 0x0020 + +/* receives frames destined to any MAC address */ +#define RX_CFG_MAC 0x0010 + +#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010 +#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000 +#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020 +#define RX_CFG_ENABLE_ANY_BSSID 0x0000 + +/* discards all broadcast frames */ +#define RX_CFG_DISABLE_BCAST 0x0200 + +#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400 +#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800 +#define RX_CFG_COPY_RX_STATUS 0x2000 +#define RX_CFG_TSF 0x10000 + +#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \ + RX_CFG_ENABLE_ONLY_MY_BSSID) + +#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\ + | RX_CFG_ENABLE_ANY_BSSID) + +#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \ + RX_CFG_ENABLE_ANY_BSSID) + +#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\ + | RX_CFG_ENABLE_ONLY_MY_BSSID) + +#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \ + | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \ + | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF) + +#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC) + +#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \ + RX_CFG_ENABLE_ONLY_MY_DEST_MAC) + +#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \ + RX_CFG_ENABLE_ONLY_MY_DEST_MAC) + +#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\ + | CFG_RX_CTL_EN | CFG_RX_BCN_EN\ + | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN) + +#define RX_FILTER_OPTION_FILTER_ALL 0 + +#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\ + | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN) + +#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\ + | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\ + | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\ + | CFG_RX_PRSP_EN) + + +/*=============================================== + Phy regs + ===============================================*/ +#define ACX_PHY_ADDR_REG SBB_ADDR +#define ACX_PHY_DATA_REG SBB_DATA +#define ACX_PHY_CTRL_REG SBB_CTL +#define ACX_PHY_REG_WR_MASK 0x00000001ul +#define ACX_PHY_REG_RD_MASK 0x00000002ul + + +/*=============================================== + EEPROM Read/Write Request 32bit RW + ------------------------------------------ + 1 EE_READ - EEPROM Read Request 1 - Setting this bit + loads a single byte of data into the EE_DATA + register from the EEPROM location specified in + the EE_ADDR register. + The Wlan hardware hardware clears this bit automatically. + EE_DATA is valid when this bit is cleared. + + 0 EE_WRITE - EEPROM Write Request - Setting this bit + writes a single byte of data from the EE_DATA register into the + EEPROM location specified in the EE_ADDR register. + The Wlan hardware hardware clears this bit automatically. +*===============================================*/ +#define ACX_EE_CTL_REG EE_CTL +#define EE_WRITE 0x00000001ul +#define EE_READ 0x00000002ul + +/*=============================================== + EEPROM Address - 32bit RW + ------------------------------------------ + This register specifies the address + within the EEPROM from/to which to read/write data. + ===============================================*/ +#define ACX_EE_ADDR_REG EE_ADDR + +/*=============================================== + EEPROM Data - 32bit RW + ------------------------------------------ + This register either holds the read 8 bits of + data from the EEPROM or the write data + to be written to the EEPROM. + ===============================================*/ +#define ACX_EE_DATA_REG EE_DATA + +/*=============================================== + EEPROM Base Address - 32bit RW + ------------------------------------------ + This register holds the upper nine bits + [23:15] of the 24-bit Wlan hardware memory + address for burst reads from EEPROM accesses. + The EEPROM provides the lower 15 bits of this address. + The MSB of the address from the EEPROM is ignored. + ===============================================*/ +#define ACX_EE_CFG EE_CFG + +/*=============================================== + GPIO Output Values -32bit, RW + ------------------------------------------ + [31:16] Reserved + [15: 0] Specify the output values (at the output driver inputs) for + GPIO[15:0], respectively. + ===============================================*/ +#define ACX_GPIO_OUT_REG GPIO_OUT +#define ACX_MAX_GPIO_LINES 15 + +/*=============================================== + Contention window -32bit, RW + ------------------------------------------ + [31:26] Reserved + [25:16] Max (0x3ff) + [15:07] Reserved + [06:00] Current contention window value - default is 0x1F + ===============================================*/ +#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG +#define ACX_CONT_WIND_MIN_MASK 0x0000007f +#define ACX_CONT_WIND_MAX 0x03ff0000 + +/* + * Indirect slave register/memory registers + * ---------------------------------------- + */ +#define HW_SLAVE_REG_ADDR_REG 0x00000004 +#define HW_SLAVE_REG_DATA_REG 0x00000008 +#define HW_SLAVE_REG_CTRL_REG 0x0000000c + +#define SLAVE_AUTO_INC 0x00010000 +#define SLAVE_NO_AUTO_INC 0x00000000 +#define SLAVE_HOST_LITTLE_ENDIAN 0x00000000 + +#define HW_SLAVE_MEM_ADDR_REG SLV_MEM_ADDR +#define HW_SLAVE_MEM_DATA_REG SLV_MEM_DATA +#define HW_SLAVE_MEM_CTRL_REG SLV_MEM_CTL +#define HW_SLAVE_MEM_ENDIAN_REG SLV_END_CTL + +#define HW_FUNC_EVENT_INT_EN 0x8000 +#define HW_FUNC_EVENT_MASK_REG 0x00000034 + +#define ACX_MAC_TIMESTAMP_REG (MAC_TIMESTAMP) + +/*=============================================== + HI_CFG Interface Configuration Register Values + ------------------------------------------ + ===============================================*/ +#define HI_CFG_UART_ENABLE 0x00000004 +#define HI_CFG_RST232_ENABLE 0x00000008 +#define HI_CFG_CLOCK_REQ_SELECT 0x00000010 +#define HI_CFG_HOST_INT_ENABLE 0x00000020 +#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040 +#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080 +#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100 +#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200 +#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400 + +/* + * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile + * for platforms using active high interrupt level + */ +#ifdef USE_ACTIVE_HIGH +#define HI_CFG_DEF_VAL \ + (HI_CFG_UART_ENABLE | \ + HI_CFG_RST232_ENABLE | \ + HI_CFG_CLOCK_REQ_SELECT | \ + HI_CFG_HOST_INT_ENABLE) +#else +#define HI_CFG_DEF_VAL \ + (HI_CFG_UART_ENABLE | \ + HI_CFG_RST232_ENABLE | \ + HI_CFG_CLOCK_REQ_SELECT | \ + HI_CFG_HOST_INT_ENABLE) + +#endif + +#define REF_FREQ_19_2 0 +#define REF_FREQ_26_0 1 +#define REF_FREQ_38_4 2 +#define REF_FREQ_40_0 3 +#define REF_FREQ_33_6 4 +#define REF_FREQ_NUM 5 + +#define LUT_PARAM_INTEGER_DIVIDER 0 +#define LUT_PARAM_FRACTIONAL_DIVIDER 1 +#define LUT_PARAM_ATTN_BB 2 +#define LUT_PARAM_ALPHA_BB 3 +#define LUT_PARAM_STOP_TIME_BB 4 +#define LUT_PARAM_BB_PLL_LOOP_FILTER 5 +#define LUT_PARAM_NUM 6 + +#define ACX_EEPROMLESS_IND_REG (SCR_PAD4) +#define USE_EEPROM 0 +#define SOFT_RESET_MAX_TIME 1000000 +#define SOFT_RESET_STALL_TIME 1000 +#define NVS_DATA_BUNDARY_ALIGNMENT 4 + + +/* Firmware image load chunk size */ +#define CHUNK_SIZE 512 + +/* Firmware image header size */ +#define FW_HDR_SIZE 8 + +#define ECPU_CONTROL_HALT 0x00000101 + + +/****************************************************************************** + + CHANNELS, BAND & REG DOMAINS definitions + +******************************************************************************/ + + +enum { + RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */ + RADIO_BAND_5GHZ = 1, /* 5 Ghz band */ + RADIO_BAND_JAPAN_4_9_GHZ = 2, + DEFAULT_BAND = RADIO_BAND_2_4GHZ, + INVALID_BAND = 0xFE, + MAX_RADIO_BANDS = 0xFF +}; + +enum { + NO_RATE = 0, + RATE_1MBPS = 0x0A, + RATE_2MBPS = 0x14, + RATE_5_5MBPS = 0x37, + RATE_6MBPS = 0x0B, + RATE_9MBPS = 0x0F, + RATE_11MBPS = 0x6E, + RATE_12MBPS = 0x0A, + RATE_18MBPS = 0x0E, + RATE_22MBPS = 0xDC, + RATE_24MBPS = 0x09, + RATE_36MBPS = 0x0D, + RATE_48MBPS = 0x08, + RATE_54MBPS = 0x0C +}; + +enum { + RATE_INDEX_1MBPS = 0, + RATE_INDEX_2MBPS = 1, + RATE_INDEX_5_5MBPS = 2, + RATE_INDEX_6MBPS = 3, + RATE_INDEX_9MBPS = 4, + RATE_INDEX_11MBPS = 5, + RATE_INDEX_12MBPS = 6, + RATE_INDEX_18MBPS = 7, + RATE_INDEX_22MBPS = 8, + RATE_INDEX_24MBPS = 9, + RATE_INDEX_36MBPS = 10, + RATE_INDEX_48MBPS = 11, + RATE_INDEX_54MBPS = 12, + RATE_INDEX_MAX = RATE_INDEX_54MBPS, + MAX_RATE_INDEX, + INVALID_RATE_INDEX = MAX_RATE_INDEX, + RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF +}; + +enum { + RATE_MASK_1MBPS = 0x1, + RATE_MASK_2MBPS = 0x2, + RATE_MASK_5_5MBPS = 0x4, + RATE_MASK_11MBPS = 0x20, +}; + +#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */ +#define OFDM_RATE_BIT BIT(6) +#define PBCC_RATE_BIT BIT(7) + +enum { + CCK_LONG = 0, + CCK_SHORT = SHORT_PREAMBLE_BIT, + PBCC_LONG = PBCC_RATE_BIT, + PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT, + OFDM = OFDM_RATE_BIT +}; + +/****************************************************************************** + +Transmit-Descriptor RATE-SET field definitions... + +Define a new "Rate-Set" for TX path that incorporates the +Rate & Modulation info into a single 16-bit field. + +TxdRateSet_t: +b15 - Indicates Preamble type (1=SHORT, 0=LONG). + Notes: + Must be LONG (0) for 1Mbps rate. + Does not apply (set to 0) for RevG-OFDM rates. +b14 - Indicates PBCC encoding (1=PBCC, 0=not). + Notes: + Does not apply (set to 0) for rates 1 and 2 Mbps. + Does not apply (set to 0) for RevG-OFDM rates. +b13 - Unused (set to 0). +b12-b0 - Supported Rate indicator bits as defined below. + +******************************************************************************/ + + +#define TNETW1251_CHIP_ID_PG1_0 0x07010101 +#define TNETW1251_CHIP_ID_PG1_1 0x07020101 +#define TNETW1251_CHIP_ID_PG1_2 0x07030101 + +/************************************************************************* + + Interrupt Trigger Register (Host -> WiLink) + +**************************************************************************/ + +/* Hardware to Embedded CPU Interrupts - first 32-bit register set */ + +/* + * Host Command Interrupt. Setting this bit masks + * the interrupt that the host issues to inform + * the FW that it has sent a command + * to the Wlan hardware Command Mailbox. + */ +#define INTR_TRIG_CMD BIT(0) + +/* + * Host Event Acknowlegde Interrupt. The host + * sets this bit to acknowledge that it received + * the unsolicited information from the event + * mailbox. + */ +#define INTR_TRIG_EVENT_ACK BIT(1) + +/* + * The host sets this bit to inform the Wlan + * FW that a TX packet is in the XFER + * Buffer #0. + */ +#define INTR_TRIG_TX_PROC0 BIT(2) + +/* + * The host sets this bit to inform the FW + * that it read a packet from RX XFER + * Buffer #0. + */ +#define INTR_TRIG_RX_PROC0 BIT(3) + +#define INTR_TRIG_DEBUG_ACK BIT(4) + +#define INTR_TRIG_STATE_CHANGED BIT(5) + + +/* Hardware to Embedded CPU Interrupts - second 32-bit register set */ + +/* + * The host sets this bit to inform the FW + * that it read a packet from RX XFER + * Buffer #1. + */ +#define INTR_TRIG_RX_PROC1 BIT(17) + +/* + * The host sets this bit to inform the Wlan + * hardware that a TX packet is in the XFER + * Buffer #1. + */ +#define INTR_TRIG_TX_PROC1 BIT(18) + +#endif diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c new file mode 100644 index 000000000000..981ea259eb89 --- /dev/null +++ b/drivers/net/wireless/wl12xx/rx.c @@ -0,0 +1,208 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "wl12xx.h" +#include "reg.h" +#include "spi.h" +#include "rx.h" + +static void wl12xx_rx_header(struct wl12xx *wl, + struct wl12xx_rx_descriptor *desc) +{ + u32 rx_packet_ring_addr; + + rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr; + if (wl->rx_current_buffer) + rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; + + wl12xx_spi_mem_read(wl, rx_packet_ring_addr, desc, + sizeof(struct wl12xx_rx_descriptor)); +} + +static void wl12xx_rx_status(struct wl12xx *wl, + struct wl12xx_rx_descriptor *desc, + struct ieee80211_rx_status *status, + u8 beacon) +{ + memset(status, 0, sizeof(struct ieee80211_rx_status)); + + status->band = IEEE80211_BAND_2GHZ; + status->mactime = desc->timestamp; + + /* + * The rx status timestamp is a 32 bits value while the TSF is a + * 64 bits one. + * For IBSS merging, TSF is mandatory, so we have to get it + * somehow, so we ask for ACX_TSF_INFO. + * That could be moved to the get_tsf() hook, but unfortunately, + * this one must be atomic, while our SPI routines can sleep. + */ + if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) { + u64 mactime; + int ret; + struct wl12xx_command cmd; + struct acx_tsf_info *tsf_info; + + memset(&cmd, 0, sizeof(cmd)); + + ret = wl12xx_cmd_interrogate(wl, ACX_TSF_INFO, + sizeof(struct acx_tsf_info), + &cmd); + if (ret < 0) { + wl12xx_warning("ACX_FW_REV interrogate failed"); + return; + } + + tsf_info = (struct acx_tsf_info *)&(cmd.parameters); + + mactime = tsf_info->current_tsf_lsb | + (tsf_info->current_tsf_msb << 31); + + status->mactime = mactime; + } + + status->signal = desc->rssi; + status->qual = (desc->rssi - WL12XX_RX_MIN_RSSI) * 100 / + (WL12XX_RX_MAX_RSSI - WL12XX_RX_MIN_RSSI); + status->qual = min(status->qual, 100); + status->qual = max(status->qual, 0); + + /* + * FIXME: guessing that snr needs to be divided by two, otherwise + * the values don't make any sense + */ + status->noise = desc->rssi - desc->snr / 2; + + status->freq = ieee80211_channel_to_frequency(desc->channel); + + status->flag |= RX_FLAG_TSFT; + + if (desc->flags & RX_DESC_ENCRYPTION_MASK) { + status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; + + if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL))) + status->flag |= RX_FLAG_DECRYPTED; + + if (unlikely(desc->flags & RX_DESC_MIC_FAIL)) + status->flag |= RX_FLAG_MMIC_ERROR; + } + + if (unlikely(!(desc->flags & RX_DESC_VALID_FCS))) + status->flag |= RX_FLAG_FAILED_FCS_CRC; + + + /* FIXME: set status->rate_idx */ +} + +static void wl12xx_rx_body(struct wl12xx *wl, + struct wl12xx_rx_descriptor *desc) +{ + struct sk_buff *skb; + struct ieee80211_rx_status status; + u8 *rx_buffer, beacon = 0; + u16 length, *fc; + u32 curr_id, last_id_inc, rx_packet_ring_addr; + + length = WL12XX_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH); + curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT; + last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1); + + if (last_id_inc != curr_id) { + wl12xx_warning("curr ID:%d, last ID inc:%d", + curr_id, last_id_inc); + wl->rx_last_id = curr_id; + } else { + wl->rx_last_id = last_id_inc; + } + + rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr + + sizeof(struct wl12xx_rx_descriptor) + 20; + if (wl->rx_current_buffer) + rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; + + skb = dev_alloc_skb(length); + if (!skb) { + wl12xx_error("Couldn't allocate RX frame"); + return; + } + + rx_buffer = skb_put(skb, length); + wl12xx_spi_mem_read(wl, rx_packet_ring_addr, rx_buffer, length); + + /* The actual lenght doesn't include the target's alignment */ + skb->len = desc->length - PLCP_HEADER_LENGTH; + + fc = (u16 *)skb->data; + + if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) + beacon = 1; + + wl12xx_rx_status(wl, desc, &status, beacon); + + wl12xx_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len, + beacon ? "beacon" : ""); + + ieee80211_rx(wl->hw, skb, &status); +} + +static void wl12xx_rx_ack(struct wl12xx *wl) +{ + u32 data, addr; + + if (wl->rx_current_buffer) { + addr = ACX_REG_INTERRUPT_TRIG_H; + data = INTR_TRIG_RX_PROC1; + } else { + addr = ACX_REG_INTERRUPT_TRIG; + data = INTR_TRIG_RX_PROC0; + } + + wl12xx_reg_write32(wl, addr, data); + + /* Toggle buffer ring */ + wl->rx_current_buffer = !wl->rx_current_buffer; +} + + +void wl12xx_rx(struct wl12xx *wl) +{ + struct wl12xx_rx_descriptor rx_desc; + + if (wl->state != WL12XX_STATE_ON) + return; + + /* We first read the frame's header */ + wl12xx_rx_header(wl, &rx_desc); + + /* Now we can read the body */ + wl12xx_rx_body(wl, &rx_desc); + + /* Finally, we need to ACK the RX */ + wl12xx_rx_ack(wl); + + return; +} diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h new file mode 100644 index 000000000000..8a23fdea5016 --- /dev/null +++ b/drivers/net/wireless/wl12xx/rx.h @@ -0,0 +1,122 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_RX_H__ +#define __WL12XX_RX_H__ + +#include + +/* + * RX PATH + * + * The Rx path uses a double buffer and an rx_contro structure, each located + * at a fixed address in the device memory. The host keeps track of which + * buffer is available and alternates between them on a per packet basis. + * The size of each of the two buffers is large enough to hold the longest + * 802.3 packet. + * The RX path goes like that: + * 1) The target generates an interrupt each time a new packet is received. + * There are 2 RX interrupts, one for each buffer. + * 2) The host reads the received packet from one of the double buffers. + * 3) The host triggers a target interrupt. + * 4) The target prepares the next RX packet. + */ + +#define WL12XX_RX_MAX_RSSI -30 +#define WL12XX_RX_MIN_RSSI -95 + +#define WL12XX_RX_ALIGN_TO 4 +#define WL12XX_RX_ALIGN(len) (((len) + WL12XX_RX_ALIGN_TO - 1) & \ + ~(WL12XX_RX_ALIGN_TO - 1)) + +#define SHORT_PREAMBLE_BIT BIT(0) +#define OFDM_RATE_BIT BIT(6) +#define PBCC_RATE_BIT BIT(7) + +#define PLCP_HEADER_LENGTH 8 +#define RX_DESC_PACKETID_SHIFT 11 +#define RX_MAX_PACKET_ID 3 + +#define RX_DESC_VALID_FCS 0x0001 +#define RX_DESC_MATCH_RXADDR1 0x0002 +#define RX_DESC_MCAST 0x0004 +#define RX_DESC_STAINTIM 0x0008 +#define RX_DESC_VIRTUAL_BM 0x0010 +#define RX_DESC_BCAST 0x0020 +#define RX_DESC_MATCH_SSID 0x0040 +#define RX_DESC_MATCH_BSSID 0x0080 +#define RX_DESC_ENCRYPTION_MASK 0x0300 +#define RX_DESC_MEASURMENT 0x0400 +#define RX_DESC_SEQNUM_MASK 0x1800 +#define RX_DESC_MIC_FAIL 0x2000 +#define RX_DESC_DECRYPT_FAIL 0x4000 + +struct wl12xx_rx_descriptor { + u32 timestamp; /* In microseconds */ + u16 length; /* Paylod length, including headers */ + u16 flags; + + /* + * 0 - 802.11 + * 1 - 802.3 + * 2 - IP + * 3 - Raw Codec + */ + u8 type; + + /* + * Recevied Rate: + * 0x0A - 1MBPS + * 0x14 - 2MBPS + * 0x37 - 5_5MBPS + * 0x0B - 6MBPS + * 0x0F - 9MBPS + * 0x6E - 11MBPS + * 0x0A - 12MBPS + * 0x0E - 18MBPS + * 0xDC - 22MBPS + * 0x09 - 24MBPS + * 0x0D - 36MBPS + * 0x08 - 48MBPS + * 0x0C - 54MBPS + */ + u8 rate; + + u8 mod_pre; /* Modulation and preamble */ + u8 channel; + + /* + * 0 - 2.4 Ghz + * 1 - 5 Ghz + */ + u8 band; + + s8 rssi; /* in dB */ + u8 rcpi; /* in dB */ + u8 snr; /* in dB */ +} __attribute__ ((packed)); + +void wl12xx_rx(struct wl12xx *wl); + +#endif diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c new file mode 100644 index 000000000000..abdf171a47e7 --- /dev/null +++ b/drivers/net/wireless/wl12xx/spi.c @@ -0,0 +1,358 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "reg.h" +#include "spi.h" +#include "ps.h" + +static int wl12xx_translate_reg_addr(struct wl12xx *wl, int addr) +{ + /* If the address is lower than REGISTERS_BASE, it means that this is + * a chip-specific register address, so look it up in the registers + * table */ + if (addr < REGISTERS_BASE) { + /* Make sure we don't go over the table */ + if (addr >= ACX_REG_TABLE_LEN) { + wl12xx_error("address out of range (%d)", addr); + return -EINVAL; + } + addr = wl->chip.acx_reg_table[addr]; + } + + return addr - wl->physical_reg_addr + wl->virtual_reg_addr; +} + +static int wl12xx_translate_mem_addr(struct wl12xx *wl, int addr) +{ + return addr - wl->physical_mem_addr + wl->virtual_mem_addr; +} + + +void wl12xx_spi_reset(struct wl12xx *wl) +{ + u8 *cmd; + struct spi_transfer t; + struct spi_message m; + + cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); + if (!cmd) { + wl12xx_error("could not allocate cmd for spi reset"); + return; + } + + memset(&t, 0, sizeof(t)); + spi_message_init(&m); + + memset(cmd, 0xff, WSPI_INIT_CMD_LEN); + + t.tx_buf = cmd; + t.len = WSPI_INIT_CMD_LEN; + spi_message_add_tail(&t, &m); + + spi_sync(wl->spi, &m); + + wl12xx_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); +} + +void wl12xx_spi_init(struct wl12xx *wl) +{ + u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd; + struct spi_transfer t; + struct spi_message m; + + cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); + if (!cmd) { + wl12xx_error("could not allocate cmd for spi init"); + return; + } + + memset(crc, 0, sizeof(crc)); + memset(&t, 0, sizeof(t)); + spi_message_init(&m); + + /* + * Set WSPI_INIT_COMMAND + * the data is being send from the MSB to LSB + */ + cmd[2] = 0xff; + cmd[3] = 0xff; + cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; + cmd[0] = 0; + cmd[7] = 0; + cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3; + cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; + + if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) + cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; + else + cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY; + + cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS + | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; + + crc[0] = cmd[1]; + crc[1] = cmd[0]; + crc[2] = cmd[7]; + crc[3] = cmd[6]; + crc[4] = cmd[5]; + + cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1; + cmd[4] |= WSPI_INIT_CMD_END; + + t.tx_buf = cmd; + t.len = WSPI_INIT_CMD_LEN; + spi_message_add_tail(&t, &m); + + spi_sync(wl->spi, &m); + + wl12xx_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); +} + +/* Set the SPI partitions to access the chip addresses + * + * There are two VIRTUAL (SPI) partitions (the memory partition and the + * registers partition), which are mapped to two different areas of the + * PHYSICAL (hardware) memory. This function also makes other checks to + * ensure that the partitions are not overlapping. In the diagram below, the + * memory partition comes before the register partition, but the opposite is + * also supported. + * + * PHYSICAL address + * space + * + * | | + * ...+----+--> mem_start + * VIRTUAL address ... | | + * space ... | | [PART_0] + * ... | | + * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size + * | | ... | | + * |MEM | ... | | + * | | ... | | + * part_size <--+----+... | | {unused area) + * | | ... | | + * |REG | ... | | + * part_size | | ... | | + * + <--+----+... ...+----+--> reg_start + * reg_size ... | | + * ... | | [PART_1] + * ... | | + * ...+----+--> reg_start + reg_size + * | | + * + */ +void wl12xx_set_partition(struct wl12xx *wl, + u32 mem_start, u32 mem_size, + u32 reg_start, u32 reg_size) +{ + u8 tx_buf[sizeof(u32) + 2 * sizeof(struct wl12xx_partition)]; + struct wl12xx_partition *partition; + struct spi_transfer t; + struct spi_message m; + u32 *cmd; + size_t len; + int addr; + + spi_message_init(&m); + memset(&t, 0, sizeof(t)); + memset(tx_buf, 0, sizeof(tx_buf)); + + cmd = (u32 *) tx_buf; + partition = (struct wl12xx_partition *) (tx_buf + sizeof(u32)); + addr = HW_ACCESS_PART0_SIZE_ADDR; + len = 2 * sizeof(struct wl12xx_partition); + + *cmd |= WSPI_CMD_WRITE; + *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; + *cmd |= addr & WSPI_CMD_BYTE_ADDR; + + wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + + /* Make sure that the two partitions together don't exceed the + * address range */ + if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) { + wl12xx_debug(DEBUG_SPI, "Total size exceeds maximum virtual" + " address range. Truncating partition[0]."); + mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size; + wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } + + if ((mem_start < reg_start) && + ((mem_start + mem_size) > reg_start)) { + /* Guarantee that the memory partition doesn't overlap the + * registers partition */ + wl12xx_debug(DEBUG_SPI, "End of partition[0] is " + "overlapping partition[1]. Adjusted."); + mem_size = reg_start - mem_start; + wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } else if ((reg_start < mem_start) && + ((reg_start + reg_size) > mem_start)) { + /* Guarantee that the register partition doesn't overlap the + * memory partition */ + wl12xx_debug(DEBUG_SPI, "End of partition[1] is" + " overlapping partition[0]. Adjusted."); + reg_size = mem_start - reg_start; + wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } + + partition[0].start = mem_start; + partition[0].size = mem_size; + partition[1].start = reg_start; + partition[1].size = reg_size; + + wl->physical_mem_addr = mem_start; + wl->physical_reg_addr = reg_start; + + wl->virtual_mem_addr = 0; + wl->virtual_reg_addr = mem_size; + + t.tx_buf = tx_buf; + t.len = sizeof(tx_buf); + spi_message_add_tail(&t, &m); + + spi_sync(wl->spi, &m); +} + +void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf, + size_t len) +{ + struct spi_transfer t[3]; + struct spi_message m; + char busy_buf[TNETWIF_READ_OFFSET_BYTES]; + u32 cmd; + + cmd = 0; + cmd |= WSPI_CMD_READ; + cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; + cmd |= addr & WSPI_CMD_BYTE_ADDR; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = 4; + spi_message_add_tail(&t[0], &m); + + /* Busy and non busy words read */ + t[1].rx_buf = busy_buf; + t[1].len = TNETWIF_READ_OFFSET_BYTES; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = buf; + t[2].len = len; + spi_message_add_tail(&t[2], &m); + + spi_sync(wl->spi, &m); + + /* FIXME: check busy words */ + + wl12xx_dump(DEBUG_SPI, "spi_read cmd -> ", &cmd, sizeof(cmd)); + wl12xx_dump(DEBUG_SPI, "spi_read buf <- ", buf, len); +} + +void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf, + size_t len) +{ + struct spi_transfer t[2]; + struct spi_message m; + u32 cmd; + + cmd = 0; + cmd |= WSPI_CMD_WRITE; + cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; + cmd |= addr & WSPI_CMD_BYTE_ADDR; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + spi_sync(wl->spi, &m); + + wl12xx_dump(DEBUG_SPI, "spi_write cmd -> ", &cmd, sizeof(cmd)); + wl12xx_dump(DEBUG_SPI, "spi_write buf -> ", buf, len); +} + +void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf, + size_t len) +{ + int physical; + + physical = wl12xx_translate_mem_addr(wl, addr); + + wl12xx_spi_read(wl, physical, buf, len); +} + +void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf, + size_t len) +{ + int physical; + + physical = wl12xx_translate_mem_addr(wl, addr); + + wl12xx_spi_write(wl, physical, buf, len); +} + +u32 wl12xx_mem_read32(struct wl12xx *wl, int addr) +{ + return wl12xx_read32(wl, wl12xx_translate_mem_addr(wl, addr)); +} + +void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val) +{ + wl12xx_write32(wl, wl12xx_translate_mem_addr(wl, addr), val); +} + +u32 wl12xx_reg_read32(struct wl12xx *wl, int addr) +{ + return wl12xx_read32(wl, wl12xx_translate_reg_addr(wl, addr)); +} + +void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val) +{ + wl12xx_write32(wl, wl12xx_translate_reg_addr(wl, addr), val); +} diff --git a/drivers/net/wireless/wl12xx/spi.h b/drivers/net/wireless/wl12xx/spi.h new file mode 100644 index 000000000000..fd3227e904a8 --- /dev/null +++ b/drivers/net/wireless/wl12xx/spi.h @@ -0,0 +1,109 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_SPI_H__ +#define __WL12XX_SPI_H__ + +#include "cmd.h" +#include "acx.h" +#include "reg.h" + +#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0 + +#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0 +#define HW_ACCESS_PART0_START_ADDR 0x1FFC4 +#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8 +#define HW_ACCESS_PART1_START_ADDR 0x1FFCC + +#define HW_ACCESS_REGISTER_SIZE 4 + +#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000 + +#define WSPI_CMD_READ 0x40000000 +#define WSPI_CMD_WRITE 0x00000000 +#define WSPI_CMD_FIXED 0x20000000 +#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000 +#define WSPI_CMD_BYTE_LENGTH_OFFSET 17 +#define WSPI_CMD_BYTE_ADDR 0x0001FFFF + +#define WSPI_INIT_CMD_CRC_LEN 5 + +#define WSPI_INIT_CMD_START 0x00 +#define WSPI_INIT_CMD_TX 0x40 +/* the extra bypass bit is sampled by the TNET as '1' */ +#define WSPI_INIT_CMD_BYPASS_BIT 0x80 +#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07 +#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80 +#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00 +#define WSPI_INIT_CMD_IOD 0x40 +#define WSPI_INIT_CMD_IP 0x20 +#define WSPI_INIT_CMD_CS 0x10 +#define WSPI_INIT_CMD_WS 0x08 +#define WSPI_INIT_CMD_WSPI 0x01 +#define WSPI_INIT_CMD_END 0x01 + +#define WSPI_INIT_CMD_LEN 8 + +#define TNETWIF_READ_OFFSET_BYTES 8 +#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \ + ((TNETWIF_READ_OFFSET_BYTES - 4) / sizeof(u32)) +#define HW_ACCESS_WSPI_INIT_CMD_MASK 0 + + +/* Raw target IO, address is not translated */ +void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf, size_t len); +void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf, size_t len); + +/* Memory target IO, address is tranlated to partition 0 */ +void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf, size_t len); +void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf, size_t len); +u32 wl12xx_mem_read32(struct wl12xx *wl, int addr); +void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val); + +/* Registers IO */ +u32 wl12xx_reg_read32(struct wl12xx *wl, int addr); +void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val); + +/* INIT and RESET words */ +void wl12xx_spi_reset(struct wl12xx *wl); +void wl12xx_spi_init(struct wl12xx *wl); +void wl12xx_set_partition(struct wl12xx *wl, + u32 part_start, u32 part_size, + u32 reg_start, u32 reg_size); + +static inline u32 wl12xx_read32(struct wl12xx *wl, int addr) +{ + u32 response; + + wl12xx_spi_read(wl, addr, &response, sizeof(u32)); + + return response; +} + +static inline void wl12xx_write32(struct wl12xx *wl, int addr, u32 val) +{ + wl12xx_spi_write(wl, addr, &val, sizeof(u32)); +} + +#endif /* __WL12XX_SPI_H__ */ diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c new file mode 100644 index 000000000000..62145e205a8c --- /dev/null +++ b/drivers/net/wireless/wl12xx/tx.c @@ -0,0 +1,557 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "wl12xx.h" +#include "reg.h" +#include "spi.h" +#include "tx.h" +#include "ps.h" + +static bool wl12xx_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count) +{ + int used, data_in_count; + + data_in_count = wl->data_in_count; + + if (data_in_count < data_out_count) + /* data_in_count has wrapped */ + data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1; + + used = data_in_count - data_out_count; + + WARN_ON(used < 0); + WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM); + + if (used >= DP_TX_PACKET_RING_CHUNK_NUM) + return true; + else + return false; +} + +static int wl12xx_tx_path_status(struct wl12xx *wl) +{ + u32 status, addr, data_out_count; + bool busy; + + addr = wl->data_path->tx_control_addr; + status = wl12xx_mem_read32(wl, addr); + data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK; + busy = wl12xx_tx_double_buffer_busy(wl, data_out_count); + + if (busy) + return -EBUSY; + + return 0; +} + +static int wl12xx_tx_id(struct wl12xx *wl, struct sk_buff *skb) +{ + int i; + + for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++) + if (wl->tx_frames[i] == NULL) { + wl->tx_frames[i] = skb; + return i; + } + + return -EBUSY; +} + +static void wl12xx_tx_control(struct tx_double_buffer_desc *tx_hdr, + struct ieee80211_tx_info *control, u16 fc) +{ + *(u16 *)&tx_hdr->control = 0; + + tx_hdr->control.rate_policy = 0; + + /* 802.11 packets */ + tx_hdr->control.packet_type = 0; + + if (control->flags & IEEE80211_TX_CTL_NO_ACK) + tx_hdr->control.ack_policy = 1; + + tx_hdr->control.tx_complete = 1; + + if ((fc & IEEE80211_FTYPE_DATA) && + ((fc & IEEE80211_STYPE_QOS_DATA) || + (fc & IEEE80211_STYPE_QOS_NULLFUNC))) + tx_hdr->control.qos = 1; +} + +/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */ +#define MAX_MSDU_SECURITY_LENGTH 16 +#define MAX_MPDU_SECURITY_LENGTH 16 +#define WLAN_QOS_HDR_LEN 26 +#define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \ + WLAN_QOS_HDR_LEN) +#define HW_BLOCK_SIZE 252 +static void wl12xx_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr) +{ + u16 payload_len, frag_threshold, mem_blocks; + u16 num_mpdus, mem_blocks_per_frag; + + frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD; + tx_hdr->frag_threshold = cpu_to_le16(frag_threshold); + + payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH; + + if (payload_len > frag_threshold) { + mem_blocks_per_frag = + ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) / + HW_BLOCK_SIZE) + 1; + num_mpdus = payload_len / frag_threshold; + mem_blocks = num_mpdus * mem_blocks_per_frag; + payload_len -= num_mpdus * frag_threshold; + num_mpdus++; + + } else { + mem_blocks_per_frag = 0; + mem_blocks = 0; + num_mpdus = 1; + } + + mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1; + + if (num_mpdus > 1) + mem_blocks += min(num_mpdus, mem_blocks_per_frag); + + tx_hdr->num_mem_blocks = mem_blocks; +} + +static int wl12xx_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb, + struct ieee80211_tx_info *control) +{ + struct tx_double_buffer_desc *tx_hdr; + struct ieee80211_rate *rate; + int id; + u16 fc; + + if (!skb) + return -EINVAL; + + id = wl12xx_tx_id(wl, skb); + if (id < 0) + return id; + + fc = *(u16 *)skb->data; + tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb, + sizeof(*tx_hdr)); + + tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr)); + rate = ieee80211_get_tx_rate(wl->hw, control); + tx_hdr->rate = cpu_to_le16(rate->hw_value); + tx_hdr->expiry_time = cpu_to_le32(1 << 16); + tx_hdr->id = id; + + /* FIXME: how to get the correct queue id? */ + tx_hdr->xmit_queue = 0; + + wl12xx_tx_control(tx_hdr, control, fc); + wl12xx_tx_frag_block_num(tx_hdr); + + return 0; +} + +/* We copy the packet to the target */ +static int wl12xx_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb, + struct ieee80211_tx_info *control) +{ + struct tx_double_buffer_desc *tx_hdr; + int len; + u32 addr; + + if (!skb) + return -EINVAL; + + tx_hdr = (struct tx_double_buffer_desc *) skb->data; + + if (control->control.hw_key && + control->control.hw_key->alg == ALG_TKIP) { + int hdrlen; + u16 fc; + u8 *pos; + + fc = *(u16 *)(skb->data + sizeof(*tx_hdr)); + tx_hdr->length += WL12XX_TKIP_IV_SPACE; + + hdrlen = ieee80211_hdrlen(fc); + + pos = skb_push(skb, WL12XX_TKIP_IV_SPACE); + memmove(pos, pos + WL12XX_TKIP_IV_SPACE, + sizeof(*tx_hdr) + hdrlen); + } + + /* Revisit. This is a workaround for getting non-aligned packets. + This happens at least with EAPOL packets from the user space. + Our DMA requires packets to be aligned on a 4-byte boundary. + */ + if (unlikely((long)skb->data & 0x03)) { + int offset = (4 - (long)skb->data) & 0x03; + wl12xx_debug(DEBUG_TX, "skb offset %d", offset); + + /* check whether the current skb can be used */ + if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) { + unsigned char *src = skb->data; + + /* align the buffer on a 4-byte boundary */ + skb_reserve(skb, offset); + memmove(skb->data, src, skb->len); + } else { + wl12xx_info("No handler, fixme!"); + return -EINVAL; + } + } + + /* Our skb->data at this point includes the HW header */ + len = WL12XX_TX_ALIGN(skb->len); + + if (wl->data_in_count & 0x1) + addr = wl->data_path->tx_packet_ring_addr + + wl->data_path->tx_packet_ring_chunk_size; + else + addr = wl->data_path->tx_packet_ring_addr; + + wl12xx_spi_mem_write(wl, addr, skb->data, len); + + wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x", + tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate); + + return 0; +} + +static void wl12xx_tx_trigger(struct wl12xx *wl) +{ + u32 data, addr; + + if (wl->data_in_count & 0x1) { + addr = ACX_REG_INTERRUPT_TRIG_H; + data = INTR_TRIG_TX_PROC1; + } else { + addr = ACX_REG_INTERRUPT_TRIG; + data = INTR_TRIG_TX_PROC0; + } + + wl12xx_reg_write32(wl, addr, data); + + /* Bumping data in */ + wl->data_in_count = (wl->data_in_count + 1) & + TX_STATUS_DATA_OUT_COUNT_MASK; +} + +/* caller must hold wl->mutex */ +static int wl12xx_tx_frame(struct wl12xx *wl, struct sk_buff *skb) +{ + struct ieee80211_tx_info *info; + int ret = 0; + u8 idx; + + info = IEEE80211_SKB_CB(skb); + + if (info->control.hw_key) { + idx = info->control.hw_key->hw_key_idx; + if (unlikely(wl->default_key != idx)) { + ret = wl12xx_acx_default_key(wl, idx); + if (ret < 0) + return ret; + } + } + + ret = wl12xx_tx_path_status(wl); + if (ret < 0) + return ret; + + ret = wl12xx_tx_fill_hdr(wl, skb, info); + if (ret < 0) + return ret; + + ret = wl12xx_tx_send_packet(wl, skb, info); + if (ret < 0) + return ret; + + wl12xx_tx_trigger(wl); + + return ret; +} + +void wl12xx_tx_work(struct work_struct *work) +{ + struct wl12xx *wl = container_of(work, struct wl12xx, tx_work); + struct sk_buff *skb; + bool woken_up = false; + int ret; + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL12XX_STATE_OFF)) + goto out; + + while ((skb = skb_dequeue(&wl->tx_queue))) { + if (!woken_up) { + wl12xx_ps_elp_wakeup(wl); + woken_up = true; + } + + ret = wl12xx_tx_frame(wl, skb); + if (ret == -EBUSY) { + /* firmware buffer is full, stop queues */ + wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, " + "stop queues"); + ieee80211_stop_queues(wl->hw); + wl->tx_queue_stopped = true; + skb_queue_head(&wl->tx_queue, skb); + goto out; + } else if (ret < 0) { + dev_kfree_skb(skb); + goto out; + } + } + +out: + if (woken_up) + wl12xx_ps_elp_sleep(wl); + + mutex_unlock(&wl->mutex); +} + +static const char *wl12xx_tx_parse_status(u8 status) +{ + /* 8 bit status field, one character per bit plus null */ + static char buf[9]; + int i = 0; + + memset(buf, 0, sizeof(buf)); + + if (status & TX_DMA_ERROR) + buf[i++] = 'm'; + if (status & TX_DISABLED) + buf[i++] = 'd'; + if (status & TX_RETRY_EXCEEDED) + buf[i++] = 'r'; + if (status & TX_TIMEOUT) + buf[i++] = 't'; + if (status & TX_KEY_NOT_FOUND) + buf[i++] = 'k'; + if (status & TX_ENCRYPT_FAIL) + buf[i++] = 'e'; + if (status & TX_UNAVAILABLE_PRIORITY) + buf[i++] = 'p'; + + /* bit 0 is unused apparently */ + + return buf; +} + +static void wl12xx_tx_packet_cb(struct wl12xx *wl, + struct tx_result *result) +{ + struct ieee80211_tx_info *info; + struct sk_buff *skb; + int hdrlen, ret; + u8 *frame; + + skb = wl->tx_frames[result->id]; + if (skb == NULL) { + wl12xx_error("SKB for packet %d is NULL", result->id); + return; + } + + info = IEEE80211_SKB_CB(skb); + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + (result->status == TX_SUCCESS)) + info->flags |= IEEE80211_TX_STAT_ACK; + + info->status.rates[0].count = result->ack_failures + 1; + wl->stats.retry_count += result->ack_failures; + + /* + * We have to remove our private TX header before pushing + * the skb back to mac80211. + */ + frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc)); + if (info->control.hw_key && + info->control.hw_key->alg == ALG_TKIP) { + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + memmove(frame + WL12XX_TKIP_IV_SPACE, frame, hdrlen); + skb_pull(skb, WL12XX_TKIP_IV_SPACE); + } + + wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x" + " status 0x%x (%s)", + result->id, skb, result->ack_failures, result->rate, + result->status, wl12xx_tx_parse_status(result->status)); + + + ieee80211_tx_status(wl->hw, skb); + + wl->tx_frames[result->id] = NULL; + + if (wl->tx_queue_stopped) { + wl12xx_debug(DEBUG_TX, "cb: queue was stopped"); + + skb = skb_dequeue(&wl->tx_queue); + + /* The skb can be NULL because tx_work might have been + scheduled before the queue was stopped making the + queue empty */ + + if (skb) { + ret = wl12xx_tx_frame(wl, skb); + if (ret == -EBUSY) { + /* firmware buffer is still full */ + wl12xx_debug(DEBUG_TX, "cb: fw buffer " + "still full"); + skb_queue_head(&wl->tx_queue, skb); + return; + } else if (ret < 0) { + dev_kfree_skb(skb); + return; + } + } + + wl12xx_debug(DEBUG_TX, "cb: waking queues"); + ieee80211_wake_queues(wl->hw); + wl->tx_queue_stopped = false; + } +} + +/* Called upon reception of a TX complete interrupt */ +void wl12xx_tx_complete(struct wl12xx *wl) +{ + int i, result_index, num_complete = 0; + struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr; + + if (unlikely(wl->state != WL12XX_STATE_ON)) + return; + + /* First we read the result */ + wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr, + result, sizeof(result)); + + result_index = wl->next_tx_complete; + + for (i = 0; i < ARRAY_SIZE(result); i++) { + result_ptr = &result[result_index]; + + if (result_ptr->done_1 == 1 && + result_ptr->done_2 == 1) { + wl12xx_tx_packet_cb(wl, result_ptr); + + result_ptr->done_1 = 0; + result_ptr->done_2 = 0; + + result_index = (result_index + 1) & + (FW_TX_CMPLT_BLOCK_SIZE - 1); + num_complete++; + } else { + break; + } + } + + /* Every completed frame needs to be acknowledged */ + if (num_complete) { + /* + * If we've wrapped, we have to clear + * the results in 2 steps. + */ + if (result_index > wl->next_tx_complete) { + /* Only 1 write is needed */ + wl12xx_spi_mem_write(wl, + wl->data_path->tx_complete_addr + + (wl->next_tx_complete * + sizeof(struct tx_result)), + &result[wl->next_tx_complete], + num_complete * + sizeof(struct tx_result)); + + + } else if (result_index < wl->next_tx_complete) { + /* 2 writes are needed */ + wl12xx_spi_mem_write(wl, + wl->data_path->tx_complete_addr + + (wl->next_tx_complete * + sizeof(struct tx_result)), + &result[wl->next_tx_complete], + (FW_TX_CMPLT_BLOCK_SIZE - + wl->next_tx_complete) * + sizeof(struct tx_result)); + + wl12xx_spi_mem_write(wl, + wl->data_path->tx_complete_addr, + result, + (num_complete - + FW_TX_CMPLT_BLOCK_SIZE + + wl->next_tx_complete) * + sizeof(struct tx_result)); + + } else { + /* We have to write the whole array */ + wl12xx_spi_mem_write(wl, + wl->data_path->tx_complete_addr, + result, + FW_TX_CMPLT_BLOCK_SIZE * + sizeof(struct tx_result)); + } + + } + + wl->next_tx_complete = result_index; +} + +/* caller must hold wl->mutex */ +void wl12xx_tx_flush(struct wl12xx *wl) +{ + int i; + struct sk_buff *skb; + struct ieee80211_tx_info *info; + + /* TX failure */ +/* control->flags = 0; FIXME */ + + while ((skb = skb_dequeue(&wl->tx_queue))) { + info = IEEE80211_SKB_CB(skb); + + wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb); + + if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) + continue; + + ieee80211_tx_status(wl->hw, skb); + } + + for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++) + if (wl->tx_frames[i] != NULL) { + skb = wl->tx_frames[i]; + info = IEEE80211_SKB_CB(skb); + + if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) + continue; + + ieee80211_tx_status(wl->hw, skb); + wl->tx_frames[i] = NULL; + } +} diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h new file mode 100644 index 000000000000..dc82691f4c14 --- /dev/null +++ b/drivers/net/wireless/wl12xx/tx.h @@ -0,0 +1,215 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_TX_H__ +#define __WL12XX_TX_H__ + +#include + +/* + * + * TX PATH + * + * The Tx path uses a double buffer and a tx_control structure, each located + * at a fixed address in the device's memory. On startup, the host retrieves + * the pointers to these addresses. A double buffer allows for continuous data + * flow towards the device. The host keeps track of which buffer is available + * and alternates between these two buffers on a per packet basis. + * + * The size of each of the two buffers is large enough to hold the longest + * 802.3 packet - maximum size Ethernet packet + header + descriptor. + * TX complete indication will be received a-synchronously in a TX done cyclic + * buffer which is composed of 16 tx_result descriptors structures and is used + * in a cyclic manner. + * + * The TX (HOST) procedure is as follows: + * 1. Read the Tx path status, that will give the data_out_count. + * 2. goto 1, if not possible. + * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double + * buffer). + * 3. Copy the packet (preceded by double_buffer_desc), if possible. + * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double + * buffer). + * 4. increment data_in_count. + * 5. Inform the firmware by generating a firmware internal interrupt. + * 6. FW will increment data_out_count after it reads the buffer. + * + * The TX Complete procedure: + * 1. To get a TX complete indication the host enables the tx_complete flag in + * the TX descriptor Structure. + * 2. For each packet with a Tx Complete field set, the firmware adds the + * transmit results to the cyclic buffer (txDoneRing) and sets both done_1 + * and done_2 to 1 to indicate driver ownership. + * 3. The firmware sends a Tx Complete interrupt to the host to trigger the + * host to process the new data. Note: interrupt will be send per packet if + * TX complete indication was requested in tx_control or per crossing + * aggregation threshold. + * 4. After receiving the Tx Complete interrupt, the host reads the + * TxDescriptorDone information in a cyclic manner and clears both done_1 + * and done_2 fields. + * + */ + +#define TX_COMPLETE_REQUIRED_BIT 0x80 +#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf +#define WL12XX_TX_ALIGN_TO 4 +#define WL12XX_TX_ALIGN(len) (((len) + WL12XX_TX_ALIGN_TO - 1) & \ + ~(WL12XX_TX_ALIGN_TO - 1)) +#define WL12XX_TKIP_IV_SPACE 4 + +struct tx_control { + /* Rate Policy (class) index */ + unsigned rate_policy:3; + + /* When set, no ack policy is expected */ + unsigned ack_policy:1; + + /* + * Packet type: + * 0 -> 802.11 + * 1 -> 802.3 + * 2 -> IP + * 3 -> raw codec + */ + unsigned packet_type:2; + + /* If set, this is a QoS-Null or QoS-Data frame */ + unsigned qos:1; + + /* + * If set, the target triggers the tx complete INT + * upon frame sending completion. + */ + unsigned tx_complete:1; + + /* 2 bytes padding before packet header */ + unsigned xfer_pad:1; + + unsigned reserved:7; +} __attribute__ ((packed)); + + +struct tx_double_buffer_desc { + /* Length of payload, including headers. */ + u16 length; + + /* + * A bit mask that specifies the initial rate to be used + * Possible values are: + * 0x0001 - 1Mbits + * 0x0002 - 2Mbits + * 0x0004 - 5.5Mbits + * 0x0008 - 6Mbits + * 0x0010 - 9Mbits + * 0x0020 - 11Mbits + * 0x0040 - 12Mbits + * 0x0080 - 18Mbits + * 0x0100 - 22Mbits + * 0x0200 - 24Mbits + * 0x0400 - 36Mbits + * 0x0800 - 48Mbits + * 0x1000 - 54Mbits + */ + u16 rate; + + /* Time in us that a packet can spend in the target */ + u32 expiry_time; + + /* index of the TX queue used for this packet */ + u8 xmit_queue; + + /* Used to identify a packet */ + u8 id; + + struct tx_control control; + + /* + * The FW should cut the packet into fragments + * of this size. + */ + u16 frag_threshold; + + /* Numbers of HW queue blocks to be allocated */ + u8 num_mem_blocks; + + u8 reserved; +} __attribute__ ((packed)); + +enum { + TX_SUCCESS = 0, + TX_DMA_ERROR = BIT(7), + TX_DISABLED = BIT(6), + TX_RETRY_EXCEEDED = BIT(5), + TX_TIMEOUT = BIT(4), + TX_KEY_NOT_FOUND = BIT(3), + TX_ENCRYPT_FAIL = BIT(2), + TX_UNAVAILABLE_PRIORITY = BIT(1), +}; + +struct tx_result { + /* + * Ownership synchronization between the host and + * the firmware. If done_1 and done_2 are cleared, + * owned by the FW (no info ready). + */ + u8 done_1; + + /* same as double_buffer_desc->id */ + u8 id; + + /* + * Total air access duration consumed by this + * packet, including all retries and overheads. + */ + u16 medium_usage; + + /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */ + u32 medium_delay; + + /* Time between host xfer and tx complete */ + u32 fw_hnadling_time; + + /* The LS-byte of the last TKIP sequence number. */ + u8 lsb_seq_num; + + /* Retry count */ + u8 ack_failures; + + /* At which rate we got a ACK */ + u16 rate; + + u16 reserved; + + /* TX_* */ + u8 status; + + /* See done_1 */ + u8 done_2; +} __attribute__ ((packed)); + +void wl12xx_tx_work(struct work_struct *work); +void wl12xx_tx_complete(struct wl12xx *wl); +void wl12xx_tx_flush(struct wl12xx *wl); + +#endif diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c new file mode 100644 index 000000000000..bd0decdcad23 --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1251.c @@ -0,0 +1,709 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "wl1251.h" +#include "reg.h" +#include "spi.h" +#include "boot.h" +#include "event.h" +#include "acx.h" +#include "tx.h" +#include "rx.h" +#include "ps.h" +#include "init.h" + +static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = { + [PART_DOWN] = { + .mem = { + .start = 0x00000000, + .size = 0x00016800 + }, + .reg = { + .start = REGISTERS_BASE, + .size = REGISTERS_DOWN_SIZE + }, + }, + + [PART_WORK] = { + .mem = { + .start = 0x00028000, + .size = 0x00014000 + }, + .reg = { + .start = REGISTERS_BASE, + .size = REGISTERS_WORK_SIZE + }, + }, + + /* WL1251 doesn't use the DRPW partition, so we don't set it here */ +}; + +static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = { + [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474), + [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478), + [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494), + [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498), + [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C), + [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0), + [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4), + [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8), + [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000), + [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C), + [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804) +}; + +static int wl1251_upload_firmware(struct wl12xx *wl) +{ + struct wl12xx_partition_set *p_table = wl->chip.p_table; + int addr, chunk_num, partition_limit; + size_t fw_data_len; + u8 *p; + + /* whal_FwCtrl_LoadFwImageSm() */ + + wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x", + wl12xx_reg_read32(wl, CHIP_ID_B)); + + /* 10.0 check firmware length and set partition */ + fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) | + (wl->fw[6] << 8) | (wl->fw[7]); + + wl12xx_debug(DEBUG_BOOT, "fw_data_len %d chunk_size %d", fw_data_len, + CHUNK_SIZE); + + if ((fw_data_len % 4) != 0) { + wl12xx_error("firmware length not multiple of four"); + return -EIO; + } + + wl12xx_set_partition(wl, + p_table[PART_DOWN].mem.start, + p_table[PART_DOWN].mem.size, + p_table[PART_DOWN].reg.start, + p_table[PART_DOWN].reg.size); + + /* 10.1 set partition limit and chunk num */ + chunk_num = 0; + partition_limit = p_table[PART_DOWN].mem.size; + + while (chunk_num < fw_data_len / CHUNK_SIZE) { + /* 10.2 update partition, if needed */ + addr = p_table[PART_DOWN].mem.start + + (chunk_num + 2) * CHUNK_SIZE; + if (addr > partition_limit) { + addr = p_table[PART_DOWN].mem.start + + chunk_num * CHUNK_SIZE; + partition_limit = chunk_num * CHUNK_SIZE + + p_table[PART_DOWN].mem.size; + wl12xx_set_partition(wl, + addr, + p_table[PART_DOWN].mem.size, + p_table[PART_DOWN].reg.start, + p_table[PART_DOWN].reg.size); + } + + /* 10.3 upload the chunk */ + addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; + p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; + wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", + p, addr); + wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE); + + chunk_num++; + } + + /* 10.4 upload the last chunk */ + addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; + p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; + wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%d B) 0x%p to 0x%x", + fw_data_len % CHUNK_SIZE, p, addr); + wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE); + + return 0; +} + +static int wl1251_upload_nvs(struct wl12xx *wl) +{ + size_t nvs_len, nvs_bytes_written, burst_len; + int nvs_start, i; + u32 dest_addr, val; + u8 *nvs_ptr, *nvs; + + nvs = wl->nvs; + if (nvs == NULL) + return -ENODEV; + + nvs_ptr = nvs; + + nvs_len = wl->nvs_len; + nvs_start = wl->fw_len; + + /* + * Layout before the actual NVS tables: + * 1 byte : burst length. + * 2 bytes: destination address. + * n bytes: data to burst copy. + * + * This is ended by a 0 length, then the NVS tables. + */ + + while (nvs_ptr[0]) { + burst_len = nvs_ptr[0]; + dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); + + /* We move our pointer to the data */ + nvs_ptr += 3; + + for (i = 0; i < burst_len; i++) { + val = (nvs_ptr[0] | (nvs_ptr[1] << 8) + | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); + + wl12xx_debug(DEBUG_BOOT, + "nvs burst write 0x%x: 0x%x", + dest_addr, val); + wl12xx_mem_write32(wl, dest_addr, val); + + nvs_ptr += 4; + dest_addr += 4; + } + } + + /* + * We've reached the first zero length, the first NVS table + * is 7 bytes further. + */ + nvs_ptr += 7; + nvs_len -= nvs_ptr - nvs; + nvs_len = ALIGN(nvs_len, 4); + + /* Now we must set the partition correctly */ + wl12xx_set_partition(wl, nvs_start, + wl->chip.p_table[PART_DOWN].mem.size, + wl->chip.p_table[PART_DOWN].reg.start, + wl->chip.p_table[PART_DOWN].reg.size); + + /* And finally we upload the NVS tables */ + nvs_bytes_written = 0; + while (nvs_bytes_written < nvs_len) { + val = (nvs_ptr[0] | (nvs_ptr[1] << 8) + | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); + + val = cpu_to_le32(val); + + wl12xx_debug(DEBUG_BOOT, + "nvs write table 0x%x: 0x%x", + nvs_start, val); + wl12xx_mem_write32(wl, nvs_start, val); + + nvs_ptr += 4; + nvs_bytes_written += 4; + nvs_start += 4; + } + + return 0; +} + +static int wl1251_boot(struct wl12xx *wl) +{ + int ret = 0, minor_minor_e2_ver; + u32 tmp, boot_data; + + ret = wl12xx_boot_soft_reset(wl); + if (ret < 0) + goto out; + + /* 2. start processing NVS file */ + ret = wl->chip.op_upload_nvs(wl); + if (ret < 0) + goto out; + + /* write firmware's last address (ie. it's length) to + * ACX_EEPROMLESS_IND_REG */ + wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len); + + /* 6. read the EEPROM parameters */ + tmp = wl12xx_reg_read32(wl, SCR_PAD2); + + /* 7. read bootdata */ + wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8; + wl->boot_attr.major = (tmp & 0x00FF0000) >> 16; + tmp = wl12xx_reg_read32(wl, SCR_PAD3); + + /* 8. check bootdata and call restart sequence */ + wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16; + minor_minor_e2_ver = (tmp & 0xFF000000) >> 24; + + wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x " + "minorE2Ver 0x%x minor_minor_e2_ver 0x%x", + wl->boot_attr.radio_type, wl->boot_attr.major, + wl->boot_attr.minor, minor_minor_e2_ver); + + ret = wl12xx_boot_init_seq(wl); + if (ret < 0) + goto out; + + /* 9. NVS processing done */ + boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); + + wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data); + + /* 10. check that ECPU_CONTROL_HALT bits are set in + * pWhalBus->uBootData and start uploading firmware + */ + if ((boot_data & ECPU_CONTROL_HALT) == 0) { + wl12xx_error("boot failed, ECPU_CONTROL_HALT not set"); + ret = -EIO; + goto out; + } + + ret = wl->chip.op_upload_fw(wl); + if (ret < 0) + goto out; + + /* 10.5 start firmware */ + ret = wl12xx_boot_run_firmware(wl); + if (ret < 0) + goto out; + + /* Get and save the firmware version */ + wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver)); + +out: + return ret; +} + +static int wl1251_mem_cfg(struct wl12xx *wl) +{ + struct wl1251_acx_config_memory mem_conf; + int ret, i; + + wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg"); + + /* memory config */ + mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS); + mem_conf.mem_config.rx_mem_block_num = 35; + mem_conf.mem_config.tx_min_mem_block_num = 64; + mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES; + mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING; + mem_conf.mem_config.num_ssid_profiles = 1; + mem_conf.mem_config.debug_buffer_size = + cpu_to_le16(TRACE_BUFFER_MAX_SIZE); + + /* RX queue config */ + mem_conf.rx_queue_config.dma_address = 0; + mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF; + mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY; + mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE; + + /* TX queue config */ + for (i = 0; i < MAX_TX_QUEUES; i++) { + mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF; + mem_conf.tx_queue_config[i].attributes = i; + } + + mem_conf.header.id = ACX_MEM_CFG; + mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) - + sizeof(struct acx_header); + mem_conf.header.len -= + (MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) * + sizeof(struct wl1251_acx_tx_queue_config); + + ret = wl12xx_cmd_configure(wl, &mem_conf, + sizeof(struct wl1251_acx_config_memory)); + if (ret < 0) + wl12xx_warning("wl1251 mem config failed: %d", ret); + + return ret; +} + +static int wl1251_hw_init_mem_config(struct wl12xx *wl) +{ + int ret; + + ret = wl1251_mem_cfg(wl); + if (ret < 0) + return ret; + + wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map), + GFP_KERNEL); + if (!wl->target_mem_map) { + wl12xx_error("couldn't allocate target memory map"); + return -ENOMEM; + } + + /* we now ask for the firmware built memory map */ + ret = wl12xx_acx_mem_map(wl, wl->target_mem_map, + sizeof(struct wl1251_acx_mem_map)); + if (ret < 0) { + wl12xx_error("couldn't retrieve firmware memory map"); + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + return ret; + } + + return 0; +} + +static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag) +{ + u32 cpu_ctrl; + + /* 10.5.0 run the firmware (I) */ + cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); + + /* 10.5.1 run the firmware (II) */ + cpu_ctrl &= ~flag; + wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); +} + +static void wl1251_target_enable_interrupts(struct wl12xx *wl) +{ + /* Enable target's interrupts */ + wl->intr_mask = WL1251_ACX_INTR_RX0_DATA | + WL1251_ACX_INTR_RX1_DATA | + WL1251_ACX_INTR_TX_RESULT | + WL1251_ACX_INTR_EVENT_A | + WL1251_ACX_INTR_EVENT_B | + WL1251_ACX_INTR_INIT_COMPLETE; + wl12xx_boot_target_enable_interrupts(wl); +} + +static void wl1251_irq_work(struct work_struct *work) +{ + u32 intr; + struct wl12xx *wl = + container_of(work, struct wl12xx, irq_work); + + mutex_lock(&wl->mutex); + + wl12xx_debug(DEBUG_IRQ, "IRQ work"); + + if (wl->state == WL12XX_STATE_OFF) + goto out; + + wl12xx_ps_elp_wakeup(wl); + + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL); + + intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); + wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr); + + if (wl->data_path) { + wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr, + &wl->rx_counter, sizeof(u32)); + + /* We handle a frmware bug here */ + switch ((wl->rx_counter - wl->rx_handled) & 0xf) { + case 0: + wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync"); + intr &= ~WL1251_ACX_INTR_RX0_DATA; + intr &= ~WL1251_ACX_INTR_RX1_DATA; + break; + case 1: + wl12xx_debug(DEBUG_IRQ, "RX: FW +1"); + intr |= WL1251_ACX_INTR_RX0_DATA; + intr &= ~WL1251_ACX_INTR_RX1_DATA; + break; + case 2: + wl12xx_debug(DEBUG_IRQ, "RX: FW +2"); + intr |= WL1251_ACX_INTR_RX0_DATA; + intr |= WL1251_ACX_INTR_RX1_DATA; + break; + default: + wl12xx_warning("RX: FW and host out of sync: %d", + wl->rx_counter - wl->rx_handled); + break; + } + + wl->rx_handled = wl->rx_counter; + + + wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter); + } + + intr &= wl->intr_mask; + + if (intr == 0) { + wl12xx_debug(DEBUG_IRQ, "INTR is 0"); + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, + ~(wl->intr_mask)); + + goto out_sleep; + } + + if (intr & WL1251_ACX_INTR_RX0_DATA) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA"); + wl12xx_rx(wl); + } + + if (intr & WL1251_ACX_INTR_RX1_DATA) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA"); + wl12xx_rx(wl); + } + + if (intr & WL1251_ACX_INTR_TX_RESULT) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT"); + wl12xx_tx_complete(wl); + } + + if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr); + if (intr & WL1251_ACX_INTR_EVENT_A) + wl12xx_event_handle(wl, 0); + else + wl12xx_event_handle(wl, 1); + } + + if (intr & WL1251_ACX_INTR_INIT_COMPLETE) + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE"); + + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask)); + +out_sleep: + wl12xx_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); +} + +static int wl1251_hw_init_txq_fill(u8 qid, + struct acx_tx_queue_qos_config *config, + u32 num_blocks) +{ + config->qid = qid; + + switch (qid) { + case QOS_AC_BE: + config->high_threshold = + (QOS_TX_HIGH_BE_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_BE_DEF * num_blocks) / 100; + break; + case QOS_AC_BK: + config->high_threshold = + (QOS_TX_HIGH_BK_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_BK_DEF * num_blocks) / 100; + break; + case QOS_AC_VI: + config->high_threshold = + (QOS_TX_HIGH_VI_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_VI_DEF * num_blocks) / 100; + break; + case QOS_AC_VO: + config->high_threshold = + (QOS_TX_HIGH_VO_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_VO_DEF * num_blocks) / 100; + break; + default: + wl12xx_error("Invalid TX queue id: %d", qid); + return -EINVAL; + } + + return 0; +} + +static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl) +{ + struct acx_tx_queue_qos_config config; + struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map; + int ret, i; + + wl12xx_debug(DEBUG_ACX, "acx tx queue config"); + + config.header.id = ACX_TX_QUEUE_CFG; + config.header.len = sizeof(struct acx_tx_queue_qos_config) - + sizeof(struct acx_header); + + for (i = 0; i < MAX_NUM_OF_AC; i++) { + ret = wl1251_hw_init_txq_fill(i, &config, + wl_mem_map->num_tx_mem_blocks); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_configure(wl, &config, sizeof(config)); + if (ret < 0) + return ret; + } + + return 0; +} + +static int wl1251_hw_init_data_path_config(struct wl12xx *wl) +{ + int ret; + + /* asking for the data path parameters */ + wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp), + GFP_KERNEL); + if (!wl->data_path) { + wl12xx_error("Couldnt allocate data path parameters"); + return -ENOMEM; + } + + ret = wl12xx_acx_data_path_params(wl, wl->data_path); + if (ret < 0) { + kfree(wl->data_path); + wl->data_path = NULL; + return ret; + } + + return 0; +} + +static int wl1251_hw_init(struct wl12xx *wl) +{ + struct wl1251_acx_mem_map *wl_mem_map; + int ret; + + ret = wl12xx_hw_init_hwenc_config(wl); + if (ret < 0) + return ret; + + /* Template settings */ + ret = wl12xx_hw_init_templates_config(wl); + if (ret < 0) + return ret; + + /* Default memory configuration */ + ret = wl1251_hw_init_mem_config(wl); + if (ret < 0) + return ret; + + /* Default data path configuration */ + ret = wl1251_hw_init_data_path_config(wl); + if (ret < 0) + goto out_free_memmap; + + /* RX config */ + ret = wl12xx_hw_init_rx_config(wl, + RX_CFG_PROMISCUOUS | RX_CFG_TSF, + RX_FILTER_OPTION_DEF); + /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, + RX_FILTER_OPTION_FILTER_ALL); */ + if (ret < 0) + goto out_free_data_path; + + /* TX queues config */ + ret = wl1251_hw_init_tx_queue_config(wl); + if (ret < 0) + goto out_free_data_path; + + /* PHY layer config */ + ret = wl12xx_hw_init_phy_config(wl); + if (ret < 0) + goto out_free_data_path; + + /* Beacon filtering */ + ret = wl12xx_hw_init_beacon_filter(wl); + if (ret < 0) + goto out_free_data_path; + + /* Bluetooth WLAN coexistence */ + ret = wl12xx_hw_init_pta(wl); + if (ret < 0) + goto out_free_data_path; + + /* Energy detection */ + ret = wl12xx_hw_init_energy_detection(wl); + if (ret < 0) + goto out_free_data_path; + + /* Beacons and boradcast settings */ + ret = wl12xx_hw_init_beacon_broadcast(wl); + if (ret < 0) + goto out_free_data_path; + + /* Enable data path */ + ret = wl12xx_cmd_data_path(wl, wl->channel, 1); + if (ret < 0) + goto out_free_data_path; + + /* Default power state */ + ret = wl12xx_hw_init_power_auth(wl); + if (ret < 0) + goto out_free_data_path; + + wl_mem_map = wl->target_mem_map; + wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x", + wl_mem_map->num_tx_mem_blocks, + wl->data_path->tx_control_addr, + wl_mem_map->num_rx_mem_blocks, + wl->data_path->rx_control_addr); + + return 0; + + out_free_data_path: + kfree(wl->data_path); + + out_free_memmap: + kfree(wl->target_mem_map); + + return ret; +} + +static int wl1251_plt_init(struct wl12xx *wl) +{ + int ret; + + ret = wl1251_hw_init_mem_config(wl); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_data_path(wl, wl->channel, 1); + if (ret < 0) + return ret; + + return 0; +} + +void wl1251_setup(struct wl12xx *wl) +{ + /* FIXME: Is it better to use strncpy here or is this ok? */ + wl->chip.fw_filename = WL1251_FW_NAME; + wl->chip.nvs_filename = WL1251_NVS_NAME; + + /* Now we know what chip we're using, so adjust the power on sleep + * time accordingly */ + wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP; + + wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE; + wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE; + + wl->chip.op_upload_nvs = wl1251_upload_nvs; + wl->chip.op_upload_fw = wl1251_upload_firmware; + wl->chip.op_boot = wl1251_boot; + wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl; + wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts; + wl->chip.op_hw_init = wl1251_hw_init; + wl->chip.op_plt_init = wl1251_plt_init; + + wl->chip.p_table = wl1251_part_table; + wl->chip.acx_reg_table = wl1251_acx_reg_table; + + INIT_WORK(&wl->irq_work, wl1251_irq_work); +} diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h new file mode 100644 index 000000000000..1f4a44330394 --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1251.h @@ -0,0 +1,165 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL1251_H__ +#define __WL1251_H__ + +#include + +#include "wl12xx.h" +#include "acx.h" + +#define WL1251_FW_NAME "wl1251-fw.bin" +#define WL1251_NVS_NAME "wl1251-nvs.bin" + +#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */ + +void wl1251_setup(struct wl12xx *wl); + + +struct wl1251_acx_memory { + __le16 num_stations; /* number of STAs to be supported. */ + u16 reserved_1; + + /* + * Nmber of memory buffers for the RX mem pool. + * The actual number may be less if there are + * not enough blocks left for the minimum num + * of TX ones. + */ + u8 rx_mem_block_num; + u8 reserved_2; + u8 num_tx_queues; /* From 1 to 16 */ + u8 host_if_options; /* HOST_IF* */ + u8 tx_min_mem_block_num; + u8 num_ssid_profiles; + __le16 debug_buffer_size; +} __attribute__ ((packed)); + + +#define ACX_RX_DESC_MIN 1 +#define ACX_RX_DESC_MAX 127 +#define ACX_RX_DESC_DEF 32 +struct wl1251_acx_rx_queue_config { + u8 num_descs; + u8 pad; + u8 type; + u8 priority; + __le32 dma_address; +} __attribute__ ((packed)); + +#define ACX_TX_DESC_MIN 1 +#define ACX_TX_DESC_MAX 127 +#define ACX_TX_DESC_DEF 16 +struct wl1251_acx_tx_queue_config { + u8 num_descs; + u8 pad[2]; + u8 attributes; +} __attribute__ ((packed)); + +#define MAX_TX_QUEUE_CONFIGS 5 +#define MAX_TX_QUEUES 4 +struct wl1251_acx_config_memory { + struct acx_header header; + + struct wl1251_acx_memory mem_config; + struct wl1251_acx_rx_queue_config rx_queue_config; + struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS]; +} __attribute__ ((packed)); + +struct wl1251_acx_mem_map { + struct acx_header header; + + void *code_start; + void *code_end; + + void *wep_defkey_start; + void *wep_defkey_end; + + void *sta_table_start; + void *sta_table_end; + + void *packet_template_start; + void *packet_template_end; + + void *queue_memory_start; + void *queue_memory_end; + + void *packet_memory_pool_start; + void *packet_memory_pool_end; + + void *debug_buffer1_start; + void *debug_buffer1_end; + + void *debug_buffer2_start; + void *debug_buffer2_end; + + /* Number of blocks FW allocated for TX packets */ + u32 num_tx_mem_blocks; + + /* Number of blocks FW allocated for RX packets */ + u32 num_rx_mem_blocks; +} __attribute__ ((packed)); + +/************************************************************************* + + Host Interrupt Register (WiLink -> Host) + +**************************************************************************/ + +/* RX packet is ready in Xfer buffer #0 */ +#define WL1251_ACX_INTR_RX0_DATA BIT(0) + +/* TX result(s) are in the TX complete buffer */ +#define WL1251_ACX_INTR_TX_RESULT BIT(1) + +/* OBSOLETE */ +#define WL1251_ACX_INTR_TX_XFR BIT(2) + +/* RX packet is ready in Xfer buffer #1 */ +#define WL1251_ACX_INTR_RX1_DATA BIT(3) + +/* Event was entered to Event MBOX #A */ +#define WL1251_ACX_INTR_EVENT_A BIT(4) + +/* Event was entered to Event MBOX #B */ +#define WL1251_ACX_INTR_EVENT_B BIT(5) + +/* OBSOLETE */ +#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6) + +/* Trace meassge on MBOX #A */ +#define WL1251_ACX_INTR_TRACE_A BIT(7) + +/* Trace meassge on MBOX #B */ +#define WL1251_ACX_INTR_TRACE_B BIT(8) + +/* Command processing completion */ +#define WL1251_ACX_INTR_CMD_COMPLETE BIT(9) + +/* Init sequence is done */ +#define WL1251_ACX_INTR_INIT_COMPLETE BIT(14) + +#define WL1251_ACX_INTR_ALL 0xFFFFFFFF + +#endif diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h new file mode 100644 index 000000000000..48641437414b --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl12xx.h @@ -0,0 +1,409 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_H__ +#define __WL12XX_H__ + +#include +#include +#include +#include + +#define DRIVER_NAME "wl12xx" +#define DRIVER_PREFIX DRIVER_NAME ": " + +enum { + DEBUG_NONE = 0, + DEBUG_IRQ = BIT(0), + DEBUG_SPI = BIT(1), + DEBUG_BOOT = BIT(2), + DEBUG_MAILBOX = BIT(3), + DEBUG_NETLINK = BIT(4), + DEBUG_EVENT = BIT(5), + DEBUG_TX = BIT(6), + DEBUG_RX = BIT(7), + DEBUG_SCAN = BIT(8), + DEBUG_CRYPT = BIT(9), + DEBUG_PSM = BIT(10), + DEBUG_MAC80211 = BIT(11), + DEBUG_CMD = BIT(12), + DEBUG_ACX = BIT(13), + DEBUG_ALL = ~0, +}; + +#define DEBUG_LEVEL (DEBUG_NONE) + +#define DEBUG_DUMP_LIMIT 1024 + +#define wl12xx_error(fmt, arg...) \ + printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg) + +#define wl12xx_warning(fmt, arg...) \ + printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg) + +#define wl12xx_notice(fmt, arg...) \ + printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg) + +#define wl12xx_info(fmt, arg...) \ + printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg) + +#define wl12xx_debug(level, fmt, arg...) \ + do { \ + if (level & DEBUG_LEVEL) \ + printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \ + } while (0) + +#define wl12xx_dump(level, prefix, buf, len) \ + do { \ + if (level & DEBUG_LEVEL) \ + print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \ + DUMP_PREFIX_OFFSET, 16, 1, \ + buf, \ + min_t(size_t, len, DEBUG_DUMP_LIMIT), \ + 0); \ + } while (0) + +#define wl12xx_dump_ascii(level, prefix, buf, len) \ + do { \ + if (level & DEBUG_LEVEL) \ + print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \ + DUMP_PREFIX_OFFSET, 16, 1, \ + buf, \ + min_t(size_t, len, DEBUG_DUMP_LIMIT), \ + true); \ + } while (0) + +#define WL12XX_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \ + CFG_BSSID_FILTER_EN) + +#define WL12XX_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN | \ + CFG_RX_MGMT_EN | \ + CFG_RX_DATA_EN | \ + CFG_RX_CTL_EN | \ + CFG_RX_BCN_EN | \ + CFG_RX_AUTH_EN | \ + CFG_RX_ASSOC_EN) + + +struct boot_attr { + u32 radio_type; + u8 mac_clock; + u8 arm_clock; + int firmware_debug; + u32 minor; + u32 major; + u32 bugfix; +}; + +enum wl12xx_state { + WL12XX_STATE_OFF, + WL12XX_STATE_ON, + WL12XX_STATE_PLT, +}; + +enum wl12xx_partition_type { + PART_DOWN, + PART_WORK, + PART_DRPW, + + PART_TABLE_LEN +}; + +struct wl12xx_partition { + u32 size; + u32 start; +}; + +struct wl12xx_partition_set { + struct wl12xx_partition mem; + struct wl12xx_partition reg; +}; + +struct wl12xx; + +/* FIXME: I'm not sure about this structure name */ +struct wl12xx_chip { + u32 id; + + const char *fw_filename; + const char *nvs_filename; + + char fw_ver[21]; + + unsigned int power_on_sleep; + int intr_cmd_complete; + int intr_init_complete; + + int (*op_upload_fw)(struct wl12xx *wl); + int (*op_upload_nvs)(struct wl12xx *wl); + int (*op_boot)(struct wl12xx *wl); + void (*op_set_ecpu_ctrl)(struct wl12xx *wl, u32 flag); + void (*op_target_enable_interrupts)(struct wl12xx *wl); + int (*op_hw_init)(struct wl12xx *wl); + int (*op_plt_init)(struct wl12xx *wl); + + struct wl12xx_partition_set *p_table; + enum wl12xx_acx_int_reg *acx_reg_table; +}; + +struct wl12xx_stats { + struct acx_statistics *fw_stats; + unsigned long fw_stats_update; + + unsigned int retry_count; + unsigned int excessive_retries; +}; + +struct wl12xx_debugfs { + struct dentry *rootdir; + struct dentry *fw_statistics; + + struct dentry *tx_internal_desc_overflow; + + struct dentry *rx_out_of_mem; + struct dentry *rx_hdr_overflow; + struct dentry *rx_hw_stuck; + struct dentry *rx_dropped; + struct dentry *rx_fcs_err; + struct dentry *rx_xfr_hint_trig; + struct dentry *rx_path_reset; + struct dentry *rx_reset_counter; + + struct dentry *dma_rx_requested; + struct dentry *dma_rx_errors; + struct dentry *dma_tx_requested; + struct dentry *dma_tx_errors; + + struct dentry *isr_cmd_cmplt; + struct dentry *isr_fiqs; + struct dentry *isr_rx_headers; + struct dentry *isr_rx_mem_overflow; + struct dentry *isr_rx_rdys; + struct dentry *isr_irqs; + struct dentry *isr_tx_procs; + struct dentry *isr_decrypt_done; + struct dentry *isr_dma0_done; + struct dentry *isr_dma1_done; + struct dentry *isr_tx_exch_complete; + struct dentry *isr_commands; + struct dentry *isr_rx_procs; + struct dentry *isr_hw_pm_mode_changes; + struct dentry *isr_host_acknowledges; + struct dentry *isr_pci_pm; + struct dentry *isr_wakeups; + struct dentry *isr_low_rssi; + + struct dentry *wep_addr_key_count; + struct dentry *wep_default_key_count; + /* skipping wep.reserved */ + struct dentry *wep_key_not_found; + struct dentry *wep_decrypt_fail; + struct dentry *wep_packets; + struct dentry *wep_interrupt; + + struct dentry *pwr_ps_enter; + struct dentry *pwr_elp_enter; + struct dentry *pwr_missing_bcns; + struct dentry *pwr_wake_on_host; + struct dentry *pwr_wake_on_timer_exp; + struct dentry *pwr_tx_with_ps; + struct dentry *pwr_tx_without_ps; + struct dentry *pwr_rcvd_beacons; + struct dentry *pwr_power_save_off; + struct dentry *pwr_enable_ps; + struct dentry *pwr_disable_ps; + struct dentry *pwr_fix_tsf_ps; + /* skipping cont_miss_bcns_spread for now */ + struct dentry *pwr_rcvd_awake_beacons; + + struct dentry *mic_rx_pkts; + struct dentry *mic_calc_failure; + + struct dentry *aes_encrypt_fail; + struct dentry *aes_decrypt_fail; + struct dentry *aes_encrypt_packets; + struct dentry *aes_decrypt_packets; + struct dentry *aes_encrypt_interrupt; + struct dentry *aes_decrypt_interrupt; + + struct dentry *event_heart_beat; + struct dentry *event_calibration; + struct dentry *event_rx_mismatch; + struct dentry *event_rx_mem_empty; + struct dentry *event_rx_pool; + struct dentry *event_oom_late; + struct dentry *event_phy_transmit_error; + struct dentry *event_tx_stuck; + + struct dentry *ps_pspoll_timeouts; + struct dentry *ps_upsd_timeouts; + struct dentry *ps_upsd_max_sptime; + struct dentry *ps_upsd_max_apturn; + struct dentry *ps_pspoll_max_apturn; + struct dentry *ps_pspoll_utilization; + struct dentry *ps_upsd_utilization; + + struct dentry *rxpipe_rx_prep_beacon_drop; + struct dentry *rxpipe_descr_host_int_trig_rx_data; + struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data; + struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data; + struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data; + + struct dentry *tx_queue_len; + + struct dentry *retry_count; + struct dentry *excessive_retries; +}; + +struct wl12xx { + struct ieee80211_hw *hw; + bool mac80211_registered; + + struct spi_device *spi; + + void (*set_power)(bool enable); + int irq; + + enum wl12xx_state state; + struct mutex mutex; + + int physical_mem_addr; + int physical_reg_addr; + int virtual_mem_addr; + int virtual_reg_addr; + + struct wl12xx_chip chip; + + int cmd_box_addr; + int event_box_addr; + struct boot_attr boot_attr; + + u8 *fw; + size_t fw_len; + u8 *nvs; + size_t nvs_len; + + u8 bssid[ETH_ALEN]; + u8 mac_addr[ETH_ALEN]; + u8 bss_type; + u8 listen_int; + int channel; + + void *target_mem_map; + struct acx_data_path_params_resp *data_path; + + /* Number of TX packets transferred to the FW, modulo 16 */ + u32 data_in_count; + + /* Frames scheduled for transmission, not handled yet */ + struct sk_buff_head tx_queue; + bool tx_queue_stopped; + + struct work_struct tx_work; + struct work_struct filter_work; + + /* Pending TX frames */ + struct sk_buff *tx_frames[16]; + + /* + * Index pointing to the next TX complete entry + * in the cyclic XT complete array we get from + * the FW. + */ + u32 next_tx_complete; + + /* FW Rx counter */ + u32 rx_counter; + + /* Rx frames handled */ + u32 rx_handled; + + /* Current double buffer */ + u32 rx_current_buffer; + u32 rx_last_id; + + /* The target interrupt mask */ + u32 intr_mask; + struct work_struct irq_work; + + /* The mbox event mask */ + u32 event_mask; + + /* Mailbox pointers */ + u32 mbox_ptr[2]; + + /* Are we currently scanning */ + bool scanning; + + /* Our association ID */ + u16 aid; + + /* Default key (for WEP) */ + u32 default_key; + + unsigned int tx_mgmt_frm_rate; + unsigned int tx_mgmt_frm_mod; + + unsigned int rx_config; + unsigned int rx_filter; + + /* is firmware in elp mode */ + bool elp; + + /* we can be in psm, but not in elp, we have to differentiate */ + bool psm; + + /* PSM mode requested */ + bool psm_requested; + + /* in dBm */ + int power_level; + + struct wl12xx_stats stats; + struct wl12xx_debugfs debugfs; +}; + +int wl12xx_plt_start(struct wl12xx *wl); +int wl12xx_plt_stop(struct wl12xx *wl); + +#define DEFAULT_HW_GEN_MODULATION_TYPE CCK_LONG /* Long Preamble */ +#define DEFAULT_HW_GEN_TX_RATE RATE_2MBPS +#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */ + +#define WL12XX_DEFAULT_POWER_LEVEL 20 + +#define WL12XX_TX_QUEUE_MAX_LENGTH 20 + +/* Different chips need different sleep times after power on. WL1271 needs + * 200ms, WL1251 needs only 10ms. By default we use 200ms, but as soon as we + * know the chip ID, we change the sleep value in the wl12xx chip structure, + * so in subsequent power ons, we don't waste more time then needed. */ +#define WL12XX_DEFAULT_POWER_ON_SLEEP 200 + +#define CHIP_ID_1251_PG10 (0x7010101) +#define CHIP_ID_1251_PG11 (0x7020101) +#define CHIP_ID_1251_PG12 (0x7030101) +#define CHIP_ID_1271_PG10 (0x4030101) + +#endif diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h new file mode 100644 index 000000000000..657c2dbcb7d3 --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h @@ -0,0 +1,156 @@ +#ifndef __WL12XX_80211_H__ +#define __WL12XX_80211_H__ + +#include /* ETH_ALEN */ + +/* RATES */ +#define IEEE80211_CCK_RATE_1MB 0x02 +#define IEEE80211_CCK_RATE_2MB 0x04 +#define IEEE80211_CCK_RATE_5MB 0x0B +#define IEEE80211_CCK_RATE_11MB 0x16 +#define IEEE80211_OFDM_RATE_6MB 0x0C +#define IEEE80211_OFDM_RATE_9MB 0x12 +#define IEEE80211_OFDM_RATE_12MB 0x18 +#define IEEE80211_OFDM_RATE_18MB 0x24 +#define IEEE80211_OFDM_RATE_24MB 0x30 +#define IEEE80211_OFDM_RATE_36MB 0x48 +#define IEEE80211_OFDM_RATE_48MB 0x60 +#define IEEE80211_OFDM_RATE_54MB 0x6C +#define IEEE80211_BASIC_RATE_MASK 0x80 + +#define IEEE80211_CCK_RATE_1MB_MASK (1<<0) +#define IEEE80211_CCK_RATE_2MB_MASK (1<<1) +#define IEEE80211_CCK_RATE_5MB_MASK (1<<2) +#define IEEE80211_CCK_RATE_11MB_MASK (1<<3) +#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) +#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) +#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) +#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) +#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) +#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) +#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) +#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) + +#define IEEE80211_CCK_RATES_MASK 0x0000000F +#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ + IEEE80211_CCK_RATE_2MB_MASK) +#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \ + IEEE80211_CCK_RATE_5MB_MASK | \ + IEEE80211_CCK_RATE_11MB_MASK) + +#define IEEE80211_OFDM_RATES_MASK 0x00000FF0 +#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ + IEEE80211_OFDM_RATE_12MB_MASK | \ + IEEE80211_OFDM_RATE_24MB_MASK) +#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \ + IEEE80211_OFDM_RATE_9MB_MASK | \ + IEEE80211_OFDM_RATE_18MB_MASK | \ + IEEE80211_OFDM_RATE_36MB_MASK | \ + IEEE80211_OFDM_RATE_48MB_MASK | \ + IEEE80211_OFDM_RATE_54MB_MASK) +#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \ + IEEE80211_CCK_DEFAULT_RATES_MASK) + + +/* This really should be 8, but not for our firmware */ +#define MAX_SUPPORTED_RATES 32 +#define COUNTRY_STRING_LEN 3 +#define MAX_COUNTRY_TRIPLETS 32 + +/* Headers */ +struct ieee80211_header { + __le16 frame_ctl; + __le16 duration_id; + u8 da[ETH_ALEN]; + u8 sa[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + __le16 seq_ctl; + u8 payload[0]; +} __attribute__ ((packed)); + +struct wl12xx_ie_header { + u8 id; + u8 len; +} __attribute__ ((packed)); + +/* IEs */ + +struct wl12xx_ie_ssid { + struct wl12xx_ie_header header; + char ssid[IW_ESSID_MAX_SIZE]; +} __attribute__ ((packed)); + +struct wl12xx_ie_rates { + struct wl12xx_ie_header header; + u8 rates[MAX_SUPPORTED_RATES]; +} __attribute__ ((packed)); + +struct wl12xx_ie_ds_params { + struct wl12xx_ie_header header; + u8 channel; +} __attribute__ ((packed)); + +struct country_triplet { + u8 channel; + u8 num_channels; + u8 max_tx_power; +} __attribute__ ((packed)); + +struct wl12xx_ie_country { + struct wl12xx_ie_header header; + u8 country_string[COUNTRY_STRING_LEN]; + struct country_triplet triplets[MAX_COUNTRY_TRIPLETS]; +} __attribute__ ((packed)); + + +/* Templates */ + +struct wl12xx_beacon_template { + struct ieee80211_header header; + __le32 time_stamp[2]; + __le16 beacon_interval; + __le16 capability; + struct wl12xx_ie_ssid ssid; + struct wl12xx_ie_rates rates; + struct wl12xx_ie_rates ext_rates; + struct wl12xx_ie_ds_params ds_params; + struct wl12xx_ie_country country; +} __attribute__ ((packed)); + +struct wl12xx_null_data_template { + struct ieee80211_header header; +} __attribute__ ((packed)); + +struct wl12xx_ps_poll_template { + u16 fc; + u16 aid; + u8 bssid[ETH_ALEN]; + u8 ta[ETH_ALEN]; +} __attribute__ ((packed)); + +struct wl12xx_qos_null_data_template { + struct ieee80211_header header; + __le16 qos_ctl; +} __attribute__ ((packed)); + +struct wl12xx_probe_req_template { + struct ieee80211_header header; + struct wl12xx_ie_ssid ssid; + struct wl12xx_ie_rates rates; + struct wl12xx_ie_rates ext_rates; +} __attribute__ ((packed)); + + +struct wl12xx_probe_resp_template { + struct ieee80211_header header; + __le32 time_stamp[2]; + __le16 beacon_interval; + __le16 capability; + struct wl12xx_ie_ssid ssid; + struct wl12xx_ie_rates rates; + struct wl12xx_ie_rates ext_rates; + struct wl12xx_ie_ds_params ds_params; + struct wl12xx_ie_country country; +} __attribute__ ((packed)); + +#endif diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h new file mode 100644 index 000000000000..11430cab2aad --- /dev/null +++ b/include/linux/spi/wl12xx.h @@ -0,0 +1,31 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef _LINUX_SPI_WL12XX_H +#define _LINUX_SPI_WL12XX_H + +struct wl12xx_platform_data { + void (*set_power)(bool enable); +}; + +#endif From e430d6074dede3b4d7d87e30296fe3894cb4709c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 27 Apr 2009 23:58:31 +0200 Subject: [PATCH 38/68] rt2x00: Add new USB ID for rt2800usb Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 812912e508cd..93ebf2458762 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -2942,6 +2942,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Linksys */ { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Logitec */ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, From 15e469284d5e89c9113379b68566b0e059a97704 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 28 Apr 2009 20:14:58 +0200 Subject: [PATCH 39/68] rt2x00: Synchronize initialization with rt2870 driver Ralink released a new rt2870 driver, these are the obvious differences I could find. It doesn't same to make my device work better, but neither does it seem to regress... Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 47 ++++++++++++++++++------- drivers/net/wireless/rt2x00/rt2800usb.h | 11 ++++++ 2 files changed, 46 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 93ebf2458762..cf4a97f32ab3 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -984,9 +984,9 @@ static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); } else { - rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); @@ -1171,7 +1171,9 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Check which section of the firmware we need. */ - if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) { + if ((chipset == 0x2860) || + (chipset == 0x2872) || + (chipset == 0x3070)) { offset = 0; length = 4096; } else { @@ -1218,6 +1220,22 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, return status; } + msleep(10); + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + + /* + * Send signal to firmware during boot time. + */ + rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + + if ((chipset == 0x3070) || + (chipset == 0x3071) || + (chipset == 0x3572)) { + udelay(200); + rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); + udelay(10); + } + /* * Wait for device to stabilize. */ @@ -1566,6 +1584,14 @@ static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) unsigned int i; u8 value; + /* + * BBP was enabled after firmware was loaded, + * but we need to reactivate it now. + */ + rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + msleep(1); + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2800usb_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) @@ -1823,8 +1849,12 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, (rt2x00dev->rx->usb_maxpacket == 512)); rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128); - /* FIXME: Calculate this value based on Aggregation defines */ - rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT, 21); + /* + * Total room for RX frames in kilobytes, PBF might still exceed + * this limit so reduce the number to prevent errors. + */ + rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT, + ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3); rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); @@ -1834,11 +1864,6 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - /* - * Send signal to firmware during boot time. - */ - rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); - /* * Initialize LED control */ @@ -1879,8 +1904,6 @@ static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - if (state == STATE_AWAKE) rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); else diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h index 8e4291d280b3..61a8be61d3f5 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.h +++ b/drivers/net/wireless/rt2x00/rt2800usb.h @@ -1375,6 +1375,10 @@ struct mac_iveiv_entry { * H2M_MAILBOX_CID: */ #define H2M_MAILBOX_CID 0x7014 +#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) +#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) +#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) +#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) /* * H2M_MAILBOX_STATUS: @@ -1715,6 +1719,7 @@ struct mac_iveiv_entry { #define MCU_SLEEP 0x30 #define MCU_WAKEUP 0x31 #define MCU_RADIO_OFF 0x35 +#define MCU_CURRENT 0x36 #define MCU_LED 0x50 #define MCU_LED_STRENGTH 0x51 #define MCU_LED_1 0x52 @@ -1723,6 +1728,12 @@ struct mac_iveiv_entry { #define MCU_RADAR 0x60 #define MCU_BOOT_SIGNAL 0x72 #define MCU_BBP_SIGNAL 0x80 +#define MCU_POWER_SAVE 0x83 + +/* + * MCU mailbox tokens + */ +#define TOKEN_WAKUP 3 /* * DMA descriptor defines. From a082381044ce026e83dbd17f8837722b028fc07d Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 30 Apr 2009 15:55:44 -0400 Subject: [PATCH 40/68] ath5k: Allow user/driver to set txpower * Now that we have regulatory control enable the driver to set txpower on hw * Also use txpower table offset so that we can match power range set by user/driver with indices on power table. Tested 2 different cards (a CM9 and an RF5112-based ubnt) and got the same output using a remote machine to measure per-packet rssi (conected the cards using attenuators). I also switched between various tx power levels and i saw an equal power change on the remote machine (so txpower changes as expected) and verified that we have the same output on each rate. Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ath5k.h | 7 ++-- drivers/net/wireless/ath/ath5k/base.c | 11 ++++++- drivers/net/wireless/ath/ath5k/phy.c | 45 +++++++++++++++++++++----- drivers/net/wireless/ath/ath5k/reset.c | 2 +- 4 files changed, 52 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 60c6d2edc4b9..04b73453f6a5 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1100,11 +1100,12 @@ struct ath5k_hw { /* Values in 0.25dB units */ s16 txp_min_pwr; s16 txp_max_pwr; + /* Values in 0.5dB units */ s16 txp_offset; s16 txp_ofdm; - /* Values in dB units */ - s16 txp_cck_ofdm_pwr_delta; s16 txp_cck_ofdm_gainf_delta; + /* Value in dB units */ + s16 txp_cck_ofdm_pwr_delta; } ah_txpower; struct { @@ -1271,7 +1272,7 @@ extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* TX power setup */ extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower); -extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower); +extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); /* * Functions used internaly diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 7b80cebffd41..d70856a9520e 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2747,12 +2747,21 @@ static int ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; struct ieee80211_conf *conf = &hw->conf; int ret; mutex_lock(&sc->lock); - sc->power_level = conf->power_level; + sc->bintval = conf->beacon_int; + + if ((changed & IEEE80211_CONF_CHANGE_POWER) && + (sc->power_level != conf->power_level)) { + sc->power_level = conf->power_level; + + /* Half dB steps */ + ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); + } ret = ath5k_chan_set(sc, conf->channel); diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index b48b29dca3d2..bb61b8e2dce9 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -168,9 +168,6 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) * tx power and a Peak to Average Power Detector (PAPD) will try * to measure the gain. * - * TODO: Use propper tx power setting for the probe packet so - * that we don't observe a serious power drop on the receiver - * * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc) * just after we enable the probe so that we don't mess with * standard traffic ? Maybe it's time to use sw interrupts and @@ -186,7 +183,7 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) /* Send the packet with 2dB below max power as * patent doc suggest */ - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4, + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4, AR5K_PHY_PAPD_PROBE_TXPOWER) | AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); @@ -2482,8 +2479,19 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, for (i = 8; i <= 15; i++) rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; - ah->ah_txpower.txp_min_pwr = rates[7]; - ah->ah_txpower.txp_max_pwr = rates[0]; + /* Now that we have all rates setup use table offset to + * match the power range set by user with the power indices + * on PCDAC/PDADC table */ + for (i = 0; i < 16; i++) { + rates[i] += ah->ah_txpower.txp_offset; + /* Don't get out of bounds */ + if (rates[i] > 63) + rates[i] = 63; + } + + /* Min/max in 0.25dB units */ + ah->ah_txpower.txp_min_pwr = 2 * rates[7]; + ah->ah_txpower.txp_max_pwr = 2 * rates[0]; ah->ah_txpower.txp_ofdm = rates[7]; } @@ -2591,16 +2599,37 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, return 0; } -int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower) +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) { /*Just a try M.F.*/ struct ieee80211_channel *channel = &ah->ah_current_channel; + u8 ee_mode; ATH5K_TRACE(ah->ah_sc); + + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + case CHANNEL_T: + case CHANNEL_XR: + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_G: + case CHANNEL_TG: + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_B: + ee_mode = AR5K_EEPROM_MODE_11B; + break; + default: + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, "changing txpower to %d\n", txpower); - return ath5k_hw_txpower(ah, channel, mode, txpower); + return ath5k_hw_txpower(ah, channel, ee_mode, txpower); } #undef _ATH5K_PHY diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 775fdf78554b..cb8a9a1398c9 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -1000,7 +1000,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, * Set TX power (FIXME) */ ret = ath5k_hw_txpower(ah, channel, ee_mode, - AR5K_TUNE_DEFAULT_TXPOWER); + ah->ah_txpower.txp_max_pwr / 2); if (ret) return ret; From cd417519086b223562b50c364d7beab12ef4c62c Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 30 Apr 2009 15:55:45 -0400 Subject: [PATCH 41/68] ath5k: Read Spur channels from EEPROM * Read Spur channel information from EEPROM and use default channels for RF5413 compatible chips that don't have this info on EEPROM. Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 37 ++++++++++++++++++++++++- drivers/net/wireless/ath/ath5k/eeprom.h | 20 +++++++++++++ 2 files changed, 56 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index c85429d2de3f..587c5b8ddc2c 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1694,9 +1694,40 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) return 0; } +static int +ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 offset; + u16 val; + int ret = 0, i; + + offset = AR5K_EEPROM_CTL(ee->ee_version) + + AR5K_EEPROM_N_CTLS(ee->ee_version); + + if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) { + /* No spur info for 5GHz */ + ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR; + /* 2 channels for 2GHz (2464/2420) */ + ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1; + ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2; + ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR; + } else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) { + for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) { + AR5K_EEPROM_READ(offset, val); + ee->ee_spur_chans[i][0] = val; + AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS, + val); + ee->ee_spur_chans[i][1] = val; + offset++; + } + } + + return ret; +} /* - * Initialize eeprom power tables + * Initialize eeprom data structure */ int ath5k_eeprom_init(struct ath5k_hw *ah) @@ -1719,6 +1750,10 @@ ath5k_eeprom_init(struct ath5k_hw *ah) if (err < 0) return err; + err = ath5k_eeprom_read_spur_chans(ah); + if (err < 0) + return err; + return 0; } diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index b0c0606dea0b..df9ffa044ea6 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -211,6 +211,23 @@ #define AR5K_EEPROM_I_GAIN 10 #define AR5K_EEPROM_CCK_OFDM_DELTA 15 #define AR5K_EEPROM_N_IQ_CAL 2 +/* 5GHz/2GHz */ +enum ath5k_eeprom_freq_bands{ + AR5K_EEPROM_BAND_5GHZ = 0, + AR5K_EEPROM_BAND_2GHZ = 1, + AR5K_EEPROM_N_FREQ_BANDS, +}; +/* Spur chans per freq band */ +#define AR5K_EEPROM_N_SPUR_CHANS 5 +/* fbin value for chan 2464 x2 */ +#define AR5K_EEPROM_5413_SPUR_CHAN_1 1640 +/* fbin value for chan 2420 x2 */ +#define AR5K_EEPROM_5413_SPUR_CHAN_2 1200 +#define AR5K_EEPROM_SPUR_CHAN_MASK 0x3FFF +#define AR5K_EEPROM_NO_SPUR 0x8000 +#define AR5K_SPUR_CHAN_WIDTH 87 +#define AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz 3125 +#define AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz 6250 #define AR5K_EEPROM_READ(_o, _v) do { \ ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ @@ -436,6 +453,9 @@ struct ath5k_eeprom_info { s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES]; s8 ee_pd_gain_overlap; + /* Spur mitigation data (fbin values for spur channels) */ + u16 ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS]; + u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; }; From 1889ba0a48688b639c2b2e9e1b0fd8f84e2c37d1 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 30 Apr 2009 15:55:46 -0400 Subject: [PATCH 42/68] ath5k: Put remaining EEPROM data on ee struct * Put remaining EEPROM information on ee struct and remove is_hb63 function. Now we also have rfkill stuff available. Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 24 +++++++++++------------- drivers/net/wireless/ath/ath5k/eeprom.h | 15 ++++++++++----- drivers/net/wireless/ath/ath5k/reset.c | 5 +++-- 3 files changed, 24 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 587c5b8ddc2c..8c9dd019d761 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -156,6 +156,17 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; } + AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val); + + if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val) + ee->ee_is_hb63 = true; + else + ee->ee_is_hb63 = false; + + AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val); + ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL); + ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false; + return 0; } @@ -1789,16 +1800,3 @@ int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) return 0; } - -bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah) -{ - u16 data; - - ath5k_hw_eeprom_read(ah, AR5K_EEPROM_IS_HB63, &data); - - if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && data) - return true; - else - return false; -} - diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index df9ffa044ea6..46e4d22591f6 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -26,6 +26,13 @@ #define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ #define AR5K_EEPROM_IS_HB63 0x000b /* Talon detect */ + +#define AR5K_EEPROM_RFKILL 0x0f +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + #define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ #define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ #define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ @@ -66,11 +73,6 @@ #define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ #define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ -#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c -#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 -#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 -#define AR5K_EEPROM_RFKILL_POLARITY_S 1 - /* Newer EEPROMs are using a different offset */ #define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) @@ -386,6 +388,9 @@ struct ath5k_eeprom_info { u16 ee_version; u16 ee_header; u16 ee_ant_gain; + u8 ee_rfkill_pin; + bool ee_rfkill_pol; + bool ee_is_hb63; u16 ee_misc0; u16 ee_misc1; u16 ee_misc2; diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index cb8a9a1398c9..d419c6a3ded7 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -507,7 +507,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) scal = AR5K_PHY_SCAL_32MHZ_2417; - else if (ath5k_eeprom_is_hb63(ah)) + else if (ee->ee_is_hb63) scal = AR5K_PHY_SCAL_32MHZ_HB63; else scal = AR5K_PHY_SCAL_32MHZ; @@ -598,9 +598,10 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, /* Set DAC/ADC delays */ if (ah->ah_version == AR5K_AR5212) { u32 scal; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) scal = AR5K_PHY_SCAL_32MHZ_2417; - else if (ath5k_eeprom_is_hb63(ah)) + else if (ee->ee_is_hb63) scal = AR5K_PHY_SCAL_32MHZ_HB63; else scal = AR5K_PHY_SCAL_32MHZ; From 428cbd4ff4d0f2423f49e499f499f04a636cb152 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 30 Apr 2009 15:55:47 -0400 Subject: [PATCH 43/68] ath5k: Beaconing fixes * Write next beacon timer even on AP mode since without this we get no beacons + ath9k does it too. Docs say that we must write 0 on this register on AP mode to start TSF increment, we do both to be on the safe side. * Fix num_tx_pending function, we never read the register :P that's why we got all those "beacon queue 7 didn't stop messages". * Put full prioriy on beacon queue, lock all queues with lower priority using the arblock and also bypass any arblock by seting the arblock ignore flag. * For the CAB queue (do we need this thing ?, it seems crap) since it's supposed to fire up after each beacon (we don't use it on driver part, ath9k/MadWiFi does), don't make it DBA gated but instead make it fire after each beacon by using the beacon sent gated flag. * Increase bmiss threshold to 10, that's what we used on MadWiFi for a long time. Also when we have pending frames on the beacon queue (we got a beacon that didn't make it on the air) it's more likely that the beacon queue never started, probably due to faulty DBA setting, so change that "beacon queue didn't stop" message. Tested this with AP mode and IBSS mode and seems to work fine ;-) Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 64 ++++++++++++++------------- drivers/net/wireless/ath/ath5k/pcu.c | 4 +- drivers/net/wireless/ath/ath5k/qcu.c | 7 ++- 3 files changed, 40 insertions(+), 35 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index d70856a9520e..b48ff7ded325 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1738,35 +1738,6 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, } } -static void ath5k_tasklet_beacon(unsigned long data) -{ - struct ath5k_softc *sc = (struct ath5k_softc *) data; - - /* - * Software beacon alert--time to send a beacon. - * - * In IBSS mode we use this interrupt just to - * keep track of the next TBTT (target beacon - * transmission time) in order to detect wether - * automatic TSF updates happened. - */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) { - /* XXX: only if VEOL suppported */ - u64 tsf = ath5k_hw_get_tsf64(sc->ah); - sc->nexttbtt += sc->bintval; - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, - "SWBA nexttbtt: %x hw_tu: %x " - "TSF: %llx\n", - sc->nexttbtt, - TSF_TO_TU(tsf), - (unsigned long long) tsf); - } else { - spin_lock(&sc->block); - ath5k_beacon_send(sc); - spin_unlock(&sc->block); - } -} - static void ath5k_tasklet_rx(unsigned long data) { @@ -2120,7 +2091,7 @@ ath5k_beacon_send(struct ath5k_softc *sc) sc->bmisscount++; ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "missed %u consecutive beacons\n", sc->bmisscount); - if (sc->bmisscount > 3) { /* NB: 3 is a guess */ + if (sc->bmisscount > 10) { /* NB: 10 is a guess */ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "stuck beacon time (%u missed)\n", sc->bmisscount); @@ -2141,10 +2112,12 @@ ath5k_beacon_send(struct ath5k_softc *sc) * are still pending on the queue. */ if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) { - ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq); + ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq); /* NB: hw still stops DMA, so proceed */ } + /* Note: Beacon buffer is updated on beacon_update when mac80211 + * calls config_interface */ ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); ath5k_hw_start_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", @@ -2301,6 +2274,35 @@ ath5k_beacon_config(struct ath5k_softc *sc) ath5k_hw_set_imr(ah, sc->imask); } +static void ath5k_tasklet_beacon(unsigned long data) +{ + struct ath5k_softc *sc = (struct ath5k_softc *) data; + + /* + * Software beacon alert--time to send a beacon. + * + * In IBSS mode we use this interrupt just to + * keep track of the next TBTT (target beacon + * transmission time) in order to detect wether + * automatic TSF updates happened. + */ + if (sc->opmode == NL80211_IFTYPE_ADHOC) { + /* XXX: only if VEOL suppported */ + u64 tsf = ath5k_hw_get_tsf64(sc->ah); + sc->nexttbtt += sc->bintval; + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + "SWBA nexttbtt: %x hw_tu: %x " + "TSF: %llx\n", + sc->nexttbtt, + TSF_TO_TU(tsf), + (unsigned long long) tsf); + } else { + spin_lock(&sc->block); + ath5k_beacon_send(sc); + spin_unlock(&sc->block); + } +} + /********************\ * Interrupt handling * diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 5f07e876d4bd..579aa0a96ab8 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -736,8 +736,8 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* When in AP mode zero timer0 to start TSF */ if (ah->ah_op_mode == NL80211_IFTYPE_AP) ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); - else - ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); + + ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c index 5094c394a4b2..73407b3f53ef 100644 --- a/drivers/net/wireless/ath/ath5k/qcu.c +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -160,7 +160,8 @@ u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) if (ah->ah_version == AR5K_AR5210) return false; - pending = (AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT); + pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)); + pending &= AR5K_QCU_STS_FRMPENDCNT; /* It's possible to have no frames pending even if TXE * is set. To indicate that q has not stopped return @@ -401,14 +402,16 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << AR5K_DCU_MISC_ARBLOCK_CTL_S) | + AR5K_DCU_MISC_ARBLOCK_IGNORE | AR5K_DCU_MISC_POST_FR_BKOFF_DIS | AR5K_DCU_MISC_BCN_ENABLE); break; case AR5K_TX_QUEUE_CAB: AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_FRSHED_BCN_SENT_GT | AR5K_QCU_MISC_CBREXP_DIS | + AR5K_QCU_MISC_RDY_VEOL_POLICY | AR5K_QCU_MISC_CBREXP_BCN_DIS); ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - From 6f5f39c95af519c24c0187950147eb79d07d1940 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 30 Apr 2009 15:55:48 -0400 Subject: [PATCH 44/68] ath5k: Enable AP mode After some debuging we were hitting the following bugs so far... * Due to huge channel list hostapd couldn't get infos from the driver and couldn't set the channel. If we manualy set the channel after hostapd starts (by setting channel to 0 -auto), beacons are sent but they wont show up on scan because they are malformed (they have channel = 0 because hostapd doesn't update the channel info -this is probably a hostapd bug so i'm CCing Jouni) and they get dropped. Bob fixed this by only allowing standard channels to be registered so now hostapd works as expected. * Docs (and HAL source) say that we must write 0 on timer0 when operating on AP mode to start TSF increment but this seems to mess with DBA in many cases and beacon queue never gets started. We fixed that on the previous patch. We have some more things to deal with... * For some reason (hw bug or something else) after restarting hostapd a few times, beacon inteval seems to change from 100ms to a sec (we get one beacon per sec). * We need to set sleep timers on STA mode and enable power saving + support PCF. ...but i think it's time we enable AP support "officialy" so that we can get more feedback from users. I ran ath5k with the mentioned patches + hostapd 0.6.8 and AP mode worked fine (it had some less throughput on my tests than IBSS but it worked). Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index b48ff7ded325..912ffc5c0203 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -516,6 +516,7 @@ ath5k_pci_probe(struct pci_dev *pdev, IEEE80211_HW_NOISE_DBM; hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MESH_POINT); From 2bed03ebf62f9d013a455209bf30d7e086120443 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 30 Apr 2009 15:55:49 -0400 Subject: [PATCH 45/68] ath5k: Implement antenna control * Add code to support the various antenna scenarios supported by hw * For now hardcode the default scenario (single or dual omnis with tx/rx diversity working and tx antenna handled by session -hw keeps track on which antenna it got ack from each ap/station and maps each ap/station to one of the antennas-). Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ath5k.h | 25 +++- drivers/net/wireless/ath/ath5k/attach.c | 1 - drivers/net/wireless/ath/ath5k/base.c | 66 ++++++--- drivers/net/wireless/ath/ath5k/eeprom.c | 8 +- drivers/net/wireless/ath/ath5k/eeprom.h | 11 +- drivers/net/wireless/ath/ath5k/phy.c | 174 +++++++++++++++++++++++- drivers/net/wireless/ath/ath5k/reg.h | 9 +- drivers/net/wireless/ath/ath5k/reset.c | 28 ++-- 8 files changed, 271 insertions(+), 51 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 04b73453f6a5..33da290e4bb5 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -209,7 +209,6 @@ #define AR5K_TUNE_MAX_TXPOWER 63 #define AR5K_TUNE_DEFAULT_TXPOWER 25 #define AR5K_TUNE_TPC_TXPOWER false -#define AR5K_TUNE_ANT_DIVERSITY true #define AR5K_TUNE_HWTXTRIES 4 #define AR5K_INIT_CARR_SENSE_EN 1 @@ -420,6 +419,17 @@ enum ath5k_driver_mode { AR5K_MODE_MAX = 5 }; +enum ath5k_ant_mode { + AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */ + AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */ + AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */ + AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */ + AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */ + AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */ + AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */ + AR5K_ANTMODE_MAX, +}; + /****************\ TX DEFINITIONS @@ -1051,8 +1061,11 @@ struct ath5k_hw { bool ah_software_retry; u32 ah_limit_tx_retries; - u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; - bool ah_ant_diversity; + /* Antenna Control */ + u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; + u8 ah_ant_mode; + u8 ah_tx_ant; + u8 ah_def_ant; u8 ah_sta_id[ETH_ALEN]; @@ -1267,9 +1280,11 @@ extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); /* Misc PHY functions */ extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); -extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); -extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* Antenna control */ +extern void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); +extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant); +extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); /* TX power setup */ extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower); extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index 70d376c63aac..c41ef58393e7 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -133,7 +133,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) ah->ah_cw_min = AR5K_TUNE_CWMIN; ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; ah->ah_software_retry = false; - ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; /* * Set the mac version based on the pci id diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 912ffc5c0203..6789c5dfcc76 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1279,7 +1279,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, (sc->power_level * 2), hw_rate, - info->control.rates[0].count, keyidx, 0, flags, + info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags, cts_rate, duration); if (ret) goto err_unmap; @@ -2009,7 +2009,8 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ath5k_hw *ah = sc->ah; struct ath5k_desc *ds; - int ret, antenna = 0; + int ret = 0; + u8 antenna; u32 flags; bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, @@ -2023,23 +2024,35 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) } ds = bf->desc; + antenna = ah->ah_tx_ant; flags = AR5K_TXDESC_NOACK; if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) { ds->ds_link = bf->daddr; /* self-linked */ flags |= AR5K_TXDESC_VEOL; - /* - * Let hardware handle antenna switching if txantenna is not set - */ - } else { + } else ds->ds_link = 0; - /* - * Switch antenna every 4 beacons if txantenna is not set - * XXX assumes two antennas - */ - if (antenna == 0) - antenna = sc->bsent & 4 ? 2 : 1; - } + + /* + * If we use multiple antennas on AP and use + * the Sectored AP scenario, switch antenna every + * 4 beacons to make sure everybody hears our AP. + * When a client tries to associate, hw will keep + * track of the tx antenna to be used for this client + * automaticaly, based on ACKed packets. + * + * Note: AP still listens and transmits RTS on the + * default antenna which is supposed to be an omni. + * + * Note2: On sectored scenarios it's possible to have + * multiple antennas (1omni -the default- and 14 sectors) + * so if we choose to actually support this mode we need + * to allow user to set how many antennas we have and tweak + * the code below to send beacons on all of them. + */ + if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP) + antenna = sc->bsent & 4 ? 2 : 1; + /* FIXME: If we are in g mode and rate is a CCK rate * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta @@ -2752,12 +2765,16 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; struct ieee80211_conf *conf = &hw->conf; - int ret; + int ret = 0; mutex_lock(&sc->lock); sc->bintval = conf->beacon_int; + ret = ath5k_chan_set(sc, conf->channel); + if (ret < 0) + return ret; + if ((changed & IEEE80211_CONF_CHANGE_POWER) && (sc->power_level != conf->power_level)) { sc->power_level = conf->power_level; @@ -2766,10 +2783,27 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); } - ret = ath5k_chan_set(sc, conf->channel); + /* TODO: + * 1) Move this on config_interface and handle each case + * separately eg. when we have only one STA vif, use + * AR5K_ANTMODE_SINGLE_AP + * + * 2) Allow the user to change antenna mode eg. when only + * one antenna is present + * + * 3) Allow the user to set default/tx antenna when possible + * + * 4) Default mode should handle 90% of the cases, together + * with fixed a/b and single AP modes we should be able to + * handle 99%. Sectored modes are extreme cases and i still + * haven't found a usage for them. If we decide to support them, + * then we must allow the user to set how many tx antennas we + * have available + */ + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); mutex_unlock(&sc->lock); - return ret; + return 0; } #define SUPPORTED_FIF_FLAGS \ diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 8c9dd019d761..c56b494d417a 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -208,16 +208,16 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; ee->ee_ant_control[mode][i++] = val & 0x3f; - /* Get antenna modes */ - ah->ah_antenna[mode][0] = + /* Get antenna switch tables */ + ah->ah_ant_ctl[mode][AR5K_ANT_CTL] = (ee->ee_ant_control[mode][0] << 4); - ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = + ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] = ee->ee_ant_control[mode][1] | (ee->ee_ant_control[mode][2] << 6) | (ee->ee_ant_control[mode][3] << 12) | (ee->ee_ant_control[mode][4] << 18) | (ee->ee_ant_control[mode][5] << 24); - ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = + ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] = ee->ee_ant_control[mode][6] | (ee->ee_ant_control[mode][7] << 6) | (ee->ee_ant_control[mode][8] << 12) | diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index 46e4d22591f6..64be73a5edae 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -240,11 +240,11 @@ enum ath5k_eeprom_freq_bands{ #define AR5K_EEPROM_READ_HDR(_o, _v) \ AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ -enum ath5k_ant_setting { - AR5K_ANT_VARIABLE = 0, /* variable by programming */ - AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ - AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ - AR5K_ANT_MAX = 3, +enum ath5k_ant_table { + AR5K_ANT_CTL = 0, /* Idle switch table settings */ + AR5K_ANT_SWTABLE_A = 1, /* Switch table for antenna A */ + AR5K_ANT_SWTABLE_B = 2, /* Switch table for antenna B */ + AR5K_ANT_MAX, }; enum ath5k_ctl_mode { @@ -461,6 +461,7 @@ struct ath5k_eeprom_info { /* Spur mitigation data (fbin values for spur channels) */ u16 ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS]; + /* Antenna raw switch tables */ u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; }; diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index bb61b8e2dce9..fd93c4e20214 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1414,25 +1414,189 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan) return ret; } +/*****************\ +* Antenna control * +\*****************/ + void /*TODO:Boundary check*/ -ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant) +ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant) { ATH5K_TRACE(ah->ah_sc); - /*Just a try M.F.*/ + if (ah->ah_version != AR5K_AR5210) - ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA); + ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA); } unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah) { ATH5K_TRACE(ah->ah_sc); - /*Just a try M.F.*/ + if (ah->ah_version != AR5K_AR5210) - return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA) & 0x7; return false; /*XXX: What do we return for 5210 ?*/ } +/* + * Enable/disable fast rx antenna diversity + */ +static void +ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable) +{ + switch (ee_mode) { + case AR5K_EEPROM_MODE_11G: + /* XXX: This is set to + * disabled on initvals !!! */ + case AR5K_EEPROM_MODE_11A: + if (enable) + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_OFDM_DIV_DIS); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_OFDM_DIV_DIS); + break; + case AR5K_EEPROM_MODE_11B: + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_OFDM_DIV_DIS); + break; + default: + return; + } + + if (enable) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART, + AR5K_PHY_RESTART_DIV_GC, 0xc); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV, + AR5K_PHY_FAST_ANT_DIV_EN); + } else { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART, + AR5K_PHY_RESTART_DIV_GC, 0x8); + + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV, + AR5K_PHY_FAST_ANT_DIV_EN); + } +} + +/* + * Set antenna operating mode + */ +void +ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) +{ + struct ieee80211_channel *channel = &ah->ah_current_channel; + bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div; + bool use_def_for_sg; + u8 def_ant, tx_ant, ee_mode; + u32 sta_id1 = 0; + + def_ant = ah->ah_def_ant; + + ATH5K_TRACE(ah->ah_sc); + + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + case CHANNEL_T: + case CHANNEL_XR: + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_G: + case CHANNEL_TG: + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_B: + ee_mode = AR5K_EEPROM_MODE_11B; + break; + default: + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return; + } + + switch (ant_mode) { + case AR5K_ANTMODE_DEFAULT: + tx_ant = 0; + use_def_for_tx = false; + update_def_on_tx = false; + use_def_for_rts = false; + use_def_for_sg = false; + fast_div = true; + break; + case AR5K_ANTMODE_FIXED_A: + def_ant = 1; + tx_ant = 0; + use_def_for_tx = true; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = true; + fast_div = false; + break; + case AR5K_ANTMODE_FIXED_B: + def_ant = 2; + tx_ant = 0; + use_def_for_tx = true; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = true; + fast_div = false; + break; + case AR5K_ANTMODE_SINGLE_AP: + def_ant = 1; /* updated on tx */ + tx_ant = 0; + use_def_for_tx = true; + update_def_on_tx = true; + use_def_for_rts = true; + use_def_for_sg = true; + fast_div = true; + break; + case AR5K_ANTMODE_SECTOR_AP: + tx_ant = 1; /* variable */ + use_def_for_tx = false; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = false; + fast_div = false; + break; + case AR5K_ANTMODE_SECTOR_STA: + tx_ant = 1; /* variable */ + use_def_for_tx = true; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = false; + fast_div = true; + break; + case AR5K_ANTMODE_DEBUG: + def_ant = 1; + tx_ant = 2; + use_def_for_tx = false; + update_def_on_tx = false; + use_def_for_rts = false; + use_def_for_sg = false; + fast_div = false; + break; + default: + return; + } + + ah->ah_tx_ant = tx_ant; + ah->ah_ant_mode = ant_mode; + + sta_id1 |= use_def_for_tx ? AR5K_STA_ID1_DEFAULT_ANTENNA : 0; + sta_id1 |= update_def_on_tx ? AR5K_STA_ID1_DESC_ANTENNA : 0; + sta_id1 |= use_def_for_rts ? AR5K_STA_ID1_RTS_DEF_ANTENNA : 0; + sta_id1 |= use_def_for_sg ? AR5K_STA_ID1_SELFGEN_DEF_ANT : 0; + + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_ANTENNA_SETTINGS); + + if (sta_id1) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, sta_id1); + + /* Note: set diversity before default antenna + * because it won't work correctly */ + ath5k_hw_set_fast_div(ah, ee_mode, fast_div); + ath5k_hw_set_def_antenna(ah, def_ant); +} + /****************\ * TX power setup * diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index 7070d1543cdc..6809b54a2ad7 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -1148,6 +1148,11 @@ #define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ #define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ +#define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \ + AR5K_STA_ID1_DESC_ANTENNA | \ + AR5K_STA_ID1_RTS_DEF_ANTENNA | \ + AR5K_STA_ID1_SELFGEN_DEF_ANT) + /* * First BSSID register (MAC address, lower 32bits) */ @@ -2028,7 +2033,9 @@ #define AR5K_PHY_AGCCTL 0x9860 /* Register address */ #define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ #define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ +#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ #define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ +#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ #define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ /* @@ -2528,7 +2535,7 @@ * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] */ #define AR5K_PHY_CCK_CROSSCORR 0xa208 -#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 /* Same address is used for antenna diversity activation */ diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index d419c6a3ded7..0e075bca384f 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -698,13 +698,13 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, /* Set antenna idle switch table */ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL, AR5K_PHY_ANT_CTL_SWTABLE_IDLE, - (ah->ah_antenna[ee_mode][0] | + (ah->ah_ant_ctl[ee_mode][0] | AR5K_PHY_ANT_CTL_TXRX_EN)); - /* Set antenna switch table */ - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], + /* Set antenna switch tables */ + ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[0]], AR5K_PHY_ANT_SWITCH_TABLE_0); - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], + ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[1]], AR5K_PHY_ANT_SWITCH_TABLE_1); /* Noise floor threshold */ @@ -1042,17 +1042,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* * In case a fixed antenna was set as default - * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE - * registers. + * use the same switch table twice. */ - if (s_ant != 0) { - if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ - ant[0] = ant[1] = AR5K_ANT_FIXED_A; - else /* 2 - Aux */ - ant[0] = ant[1] = AR5K_ANT_FIXED_B; - } else { - ant[0] = AR5K_ANT_FIXED_A; - ant[1] = AR5K_ANT_FIXED_B; + if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A) + ant[0] = ant[1] = AR5K_ANT_SWTABLE_A; + else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B) + ant[0] = ant[1] = AR5K_ANT_SWTABLE_B; + else { + ant[0] = AR5K_ANT_SWTABLE_A; + ant[1] = AR5K_ANT_SWTABLE_B; } /* Commit values from EEPROM */ @@ -1260,6 +1258,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, */ ath5k_hw_noise_floor_calibration(ah, channel->center_freq); + /* Restore antenna mode */ + ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); /* * Configure QCUs/DCUs From 57e6c56dbb52d680f61dd629759fe2974840ed93 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 30 Apr 2009 15:55:50 -0400 Subject: [PATCH 46/68] ath5k: Add Spur filter support on newer chips * Add spur filter support for RF5413 and later chips Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ath5k.h | 5 + drivers/net/wireless/ath/ath5k/phy.c | 255 ++++++++++++++++++++++++- drivers/net/wireless/ath/ath5k/reset.c | 35 ++-- 3 files changed, 270 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 33da290e4bb5..813718210338 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1278,6 +1278,11 @@ extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *chann /* PHY calibration */ extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); +/* Spur mitigation */ +bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct ieee80211_channel *channel); +void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, + struct ieee80211_channel *channel); /* Misc PHY functions */ extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index fd93c4e20214..6737ba0a4de3 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1353,6 +1353,257 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, return ret; } +/***************************\ +* Spur mitigation functions * +\***************************/ + +bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u8 refclk_freq; + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + refclk_freq = 40; + else + refclk_freq = 32; + + if ((channel->center_freq % refclk_freq != 0) && + ((channel->center_freq % refclk_freq < 10) || + (channel->center_freq % refclk_freq > 22))) + return true; + else + return false; +} + +void +ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 mag_mask[4] = {0, 0, 0, 0}; + u32 pilot_mask[2] = {0, 0}; + /* Note: fbin values are scaled up by 2 */ + u16 spur_chan_fbin, chan_fbin, symbol_width, spur_detection_window; + s32 spur_delta_phase, spur_freq_sigma_delta; + s32 spur_offset, num_symbols_x16; + u8 num_symbol_offsets, i, freq_band; + + /* Convert current frequency to fbin value (the same way channels + * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale + * up by 2 so we can compare it later */ + if (channel->hw_value & CHANNEL_2GHZ) { + chan_fbin = (channel->center_freq - 2300) * 10; + freq_band = AR5K_EEPROM_BAND_2GHZ; + } else { + chan_fbin = (channel->center_freq - 4900) * 10; + freq_band = AR5K_EEPROM_BAND_5GHZ; + } + + /* Check if any spur_chan_fbin from EEPROM is + * within our current channel's spur detection range */ + spur_chan_fbin = AR5K_EEPROM_NO_SPUR; + spur_detection_window = AR5K_SPUR_CHAN_WIDTH; + /* XXX: Half/Quarter channels ?*/ + if (channel->hw_value & CHANNEL_TURBO) + spur_detection_window *= 2; + + for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) { + spur_chan_fbin = ee->ee_spur_chans[i][freq_band]; + + /* Note: mask cleans AR5K_EEPROM_NO_SPUR flag + * so it's zero if we got nothing from EEPROM */ + if (spur_chan_fbin == AR5K_EEPROM_NO_SPUR) { + spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK; + break; + } + + if ((chan_fbin - spur_detection_window <= + (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK)) && + (chan_fbin + spur_detection_window >= + (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK))) { + spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK; + break; + } + } + + /* We need to enable spur filter for this channel */ + if (spur_chan_fbin) { + spur_offset = spur_chan_fbin - chan_fbin; + /* + * Calculate deltas: + * spur_freq_sigma_delta -> spur_offset / sample_freq << 21 + * spur_delta_phase -> spur_offset / chip_freq << 11 + * Note: Both values have 100KHz resolution + */ + /* XXX: Half/Quarter rate channels ? */ + switch (channel->hw_value) { + case CHANNEL_A: + /* Both sample_freq and chip_freq are 40MHz */ + spur_delta_phase = (spur_offset << 17) / 25; + spur_freq_sigma_delta = (spur_delta_phase >> 10); + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + break; + case CHANNEL_G: + /* sample_freq -> 40MHz chip_freq -> 44MHz + * (for b compatibility) */ + spur_freq_sigma_delta = (spur_offset << 8) / 55; + spur_delta_phase = (spur_offset << 17) / 25; + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + break; + case CHANNEL_T: + case CHANNEL_TG: + /* Both sample_freq and chip_freq are 80MHz */ + spur_delta_phase = (spur_offset << 16) / 25; + spur_freq_sigma_delta = (spur_delta_phase >> 10); + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz; + break; + default: + return; + } + + /* Calculate pilot and magnitude masks */ + + /* Scale up spur_offset by 1000 to switch to 100HZ resolution + * and divide by symbol_width to find how many symbols we have + * Note: number of symbols is scaled up by 16 */ + num_symbols_x16 = ((spur_offset * 1000) << 4) / symbol_width; + + /* Spur is on a symbol if num_symbols_x16 % 16 is zero */ + if (!(num_symbols_x16 & 0xF)) + /* _X_ */ + num_symbol_offsets = 3; + else + /* _xx_ */ + num_symbol_offsets = 4; + + for (i = 0; i < num_symbol_offsets; i++) { + + /* Calculate pilot mask */ + s32 curr_sym_off = + (num_symbols_x16 / 16) + i + 25; + + /* Pilot magnitude mask seems to be a way to + * declare the boundaries for our detection + * window or something, it's 2 for the middle + * value(s) where the symbol is expected to be + * and 1 on the boundary values */ + u8 plt_mag_map = + (i == 0 || i == (num_symbol_offsets - 1)) + ? 1 : 2; + + if (curr_sym_off >= 0 && curr_sym_off <= 32) { + if (curr_sym_off <= 25) + pilot_mask[0] |= 1 << curr_sym_off; + else if (curr_sym_off >= 27) + pilot_mask[0] |= 1 << (curr_sym_off - 1); + } else if (curr_sym_off >= 33 && curr_sym_off <= 52) + pilot_mask[1] |= 1 << (curr_sym_off - 33); + + /* Calculate magnitude mask (for viterbi decoder) */ + if (curr_sym_off >= -1 && curr_sym_off <= 14) + mag_mask[0] |= + plt_mag_map << (curr_sym_off + 1) * 2; + else if (curr_sym_off >= 15 && curr_sym_off <= 30) + mag_mask[1] |= + plt_mag_map << (curr_sym_off - 15) * 2; + else if (curr_sym_off >= 31 && curr_sym_off <= 46) + mag_mask[2] |= + plt_mag_map << (curr_sym_off - 31) * 2; + else if (curr_sym_off >= 46 && curr_sym_off <= 53) + mag_mask[3] |= + plt_mag_map << (curr_sym_off - 47) * 2; + + } + + /* Write settings on hw to enable spur filter */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_RATE, 0xff); + /* XXX: Self correlator also ? */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_PILOT_MASK_EN | + AR5K_PHY_IQ_CHAN_MASK_EN | + AR5K_PHY_IQ_SPUR_FILT_EN); + + /* Set delta phase and freq sigma delta */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(spur_delta_phase, + AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE) | + AR5K_REG_SM(spur_freq_sigma_delta, + AR5K_PHY_TIMING_11_SPUR_FREQ_SD) | + AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC, + AR5K_PHY_TIMING_11); + + /* Write pilot masks */ + ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_7); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8, + AR5K_PHY_TIMING_8_PILOT_MASK_2, + pilot_mask[1]); + + ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_9); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10, + AR5K_PHY_TIMING_10_PILOT_MASK_2, + pilot_mask[1]); + + /* Write magnitude masks */ + ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK_1); + ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK_2); + ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_MASK_4, + mag_mask[3]); + + ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK2_1); + ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK2_2); + ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK2_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4, + AR5K_PHY_BIN_MASK2_4_MASK_4, + mag_mask[3]); + + } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & + AR5K_PHY_IQ_SPUR_FILT_EN) { + /* Clean up spur mitigation settings and disable fliter */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_RATE, 0); + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_PILOT_MASK_EN | + AR5K_PHY_IQ_CHAN_MASK_EN | + AR5K_PHY_IQ_SPUR_FILT_EN); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_11); + + /* Clear pilot masks */ + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_7); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8, + AR5K_PHY_TIMING_8_PILOT_MASK_2, + 0); + + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_9); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10, + AR5K_PHY_TIMING_10_PILOT_MASK_2, + 0); + + /* Clear magnitude masks */ + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_1); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_2); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_MASK_4, + 0); + + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_1); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_2); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4, + AR5K_PHY_BIN_MASK2_4_MASK_4, + 0); + } +} + +/********************\ + Misc PHY functions +\********************/ + int ath5k_hw_phy_disable(struct ath5k_hw *ah) { ATH5K_TRACE(ah->ah_sc); @@ -1362,10 +1613,6 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah) return 0; } -/********************\ - Misc PHY functions -\********************/ - /* * Get the PHY Chip revision */ diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 0e075bca384f..c1862f8a2e7b 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -536,26 +536,6 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) return; } -static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u8 refclk_freq; - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) - refclk_freq = 40; - else - refclk_freq = 32; - - if ((channel->center_freq % refclk_freq != 0) && - ((channel->center_freq % refclk_freq < 10) || - (channel->center_freq % refclk_freq > 22))) - return true; - else - return false; -} - /* TODO: Half/Quarter rate */ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, struct ieee80211_channel *channel) @@ -998,7 +978,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, ath5k_hw_tweak_initval_settings(ah, channel); /* - * Set TX power (FIXME) + * Set TX power */ ret = ath5k_hw_txpower(ah, channel, ee_mode, ah->ah_txpower.txp_max_pwr / 2); @@ -1024,9 +1004,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Write OFDM timings on 5212*/ if (ah->ah_version == AR5K_AR5212 && channel->hw_value & CHANNEL_OFDM) { + struct ath5k_eeprom_info *ee = + &ah->ah_capabilities.cap_eeprom; + ret = ath5k_hw_write_ofdm_timings(ah, channel); if (ret) return ret; + + /* Note: According to docs we can have a newer + * EEPROM on old hardware, so we need to verify + * that our hardware is new enough to have spur + * mitigation registers (delta phase etc) */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424 || + (ah->ah_mac_srev >= AR5K_SREV_AR5424 && + ee->ee_version >= AR5K_EEPROM_VERSION_5_3)) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); } /*Enable/disable 802.11b mode on 5111 From 6752ee90aa7c933294a10dbd9ea51f12dece7eb1 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 30 Apr 2009 15:55:51 -0400 Subject: [PATCH 47/68] ath5k: use ctl settings based on current regdomain Update ath5k to use the ctl settings for tx power based on current regulatory domain. Signed-off-by: Bob Copeland Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 6737ba0a4de3..d0d1c350025a 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -2158,8 +2158,6 @@ ath5k_get_rate_pcal_data(struct ath5k_hw *ah, * Get the max edge power for this channel if * we have such data from EEPROM's Conformance Test * Limits (CTL), and limit max power if needed. - * - * FIXME: Only works for world regulatory domains */ static void ath5k_get_max_ctl_power(struct ath5k_hw *ah, @@ -2175,26 +2173,23 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah, u8 ctl_idx = 0xFF; u32 target = channel->center_freq; - /* Find out a CTL for our mode that's not mapped - * on a specific reg domain. - * - * TODO: Map our current reg domain to one of the 3 available - * reg domain ids so that we can support more CTLs. */ + ctl_mode = ath_regd_get_band_ctl(&ah->ah_regulatory, channel->band); + switch (channel->hw_value & CHANNEL_MODES) { case CHANNEL_A: - ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN; + ctl_mode |= AR5K_CTL_11A; break; case CHANNEL_G: - ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN; + ctl_mode |= AR5K_CTL_11G; break; case CHANNEL_B: - ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN; + ctl_mode |= AR5K_CTL_11B; break; case CHANNEL_T: - ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN; + ctl_mode |= AR5K_CTL_TURBO; break; case CHANNEL_TG: - ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN; + ctl_mode |= AR5K_CTL_TURBOG; break; case CHANNEL_XR: /* Fall through */ From 84379cba44042a4caf793f821be8bd1a9b8235c2 Mon Sep 17 00:00:00 2001 From: Paride Legovini Date: Thu, 30 Apr 2009 15:55:52 -0400 Subject: [PATCH 48/68] Add LED support for AR5BXB6 IBM Thinkpad PCIe adapters Add LED support on the IBM ThinkPad 11a/b/g Wireless LAN Mini Express Adapter (AR5BXB6), found on the IBM/Lenovo Thinkpad X60/T60/Z60 series. Signed-off-by: Paride Legovini Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/led.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index cbdc0b308429..876725f08b6c 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -53,8 +53,6 @@ /* Devices we match on for LED config info (typically laptops) */ static const struct pci_device_id ath5k_led_devices[] = { - /* IBM-specific AR5212 */ - { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) }, /* AR5211 */ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) }, /* HP Compaq nc6xx, nc4000, nx6000 */ @@ -69,6 +67,10 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) }, /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */ { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) }, + /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */ + { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) }, + /* IBM-specific AR5212 (all others) */ + { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) }, { } }; From 722404983b9deb21e4f786224201ca2ab27a1c48 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Thu, 30 Apr 2009 13:56:26 -0700 Subject: [PATCH 49/68] iwl3945: fix lock dependency Patch seperates rx_used and rx_free into two different atomic contexts. We can now avoid using GFP_ATOMIC for skb allocation and use GFP_KERNEL. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 37 ++++++++++----------- 1 file changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 5cd4321d7cf5..dc0359ce1ec0 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1344,15 +1344,24 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv) struct list_head *element; struct iwl_rx_mem_buffer *rxb; unsigned long flags; - spin_lock_irqsave(&rxq->lock, flags); - while (!list_empty(&rxq->rx_used)) { + + while (1) { + spin_lock_irqsave(&rxq->lock, flags); + + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + return; + } + element = rxq->rx_used.next; rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + spin_unlock_irqrestore(&rxq->lock, flags); /* Alloc a new receive buffer */ rxb->skb = alloc_skb(priv->hw_params.rx_buf_size, - __GFP_NOWARN | GFP_ATOMIC); + GFP_KERNEL); if (!rxb->skb) { if (net_ratelimit()) IWL_CRIT(priv, ": Can not allocate SKB buffers\n"); @@ -1370,18 +1379,18 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv) */ skb_reserve(rxb->skb, 4); - priv->alloc_rxb_skb++; - list_del(element); - /* Get physical address of RB/SKB */ rxb->real_dma_addr = pci_map_single(priv->pci_dev, rxb->skb->data, priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); + + spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &rxq->rx_free); + priv->alloc_rxb_skb++; rxq->free_count++; + spin_unlock_irqrestore(&rxq->lock, flags); } - spin_unlock_irqrestore(&rxq->lock, flags); } void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) @@ -1414,18 +1423,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) spin_unlock_irqrestore(&rxq->lock, flags); } -/* - * this should be called while priv->lock is locked - */ -static void __iwl3945_rx_replenish(void *data) -{ - struct iwl_priv *priv = data; - - iwl3945_rx_allocate(priv); - iwl3945_rx_queue_restock(priv); -} - - void iwl3945_rx_replenish(void *data) { struct iwl_priv *priv = data; @@ -1644,7 +1641,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) count++; if (count >= 8) { priv->rxq.read = i; - __iwl3945_rx_replenish(priv); + iwl3945_rx_queue_restock(priv); count = 0; } } From 286d94906587901851906a5e2ddc09bc1a7ba1d9 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 30 Apr 2009 13:56:27 -0700 Subject: [PATCH 50/68] iwlagn: disable PS support for iwlagn Some issues in PS prevent us from supporting it reliably. When 4965 goes to sleep it stores some data in host DRAM, reads it back when device wakes up. In 4965 there is a problem that the data is not correct when ucode starts using it upon wakeup. For all iwlagn devices there is a problem where command is sent when PS is enabled. At the moment there is a locking problem with priv->lock not being held and thus not requesting nic access correctly. We disable PS until these issues have been resolved. Signed-off-by: Reinette Chatre Signed-off-by: Mohamed Abbas Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 0f21fc136ca7..1366222bb50a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1298,8 +1298,7 @@ int iwl_setup_mac(struct iwl_priv *priv) hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_SUPPORTS_PS; + IEEE80211_HW_SPECTRUM_MGMT; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); From a30199f129e17998f802d3307907560431e78493 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Thu, 30 Apr 2009 13:56:28 -0700 Subject: [PATCH 51/68] iwlwifi: "is_fat" bit in rate scale match RXON flag This patch change the "is_fat" checking in rate scale to use iwl_is_fat_tx_allowed() to match the sta and RX_ON command setting. Signed-off-by: Wey-Yi Guy Tested-by: Conrad Kostecki Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 29d38b938f38..0a71bb55d0ee 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -1207,8 +1207,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, tbl->action = 0; rate_mask = lq_sta->active_mimo2_rate; - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) + if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap)) tbl->is_fat = 1; else tbl->is_fat = 0; @@ -1273,8 +1272,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, tbl->action = 0; rate_mask = lq_sta->active_mimo3_rate; - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) + if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap)) tbl->is_fat = 1; else tbl->is_fat = 0; @@ -1332,8 +1330,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, tbl->action = 0; rate_mask = lq_sta->active_siso_rate; - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) + if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap)) tbl->is_fat = 1; else tbl->is_fat = 0; From 4e8e2c824027ed433be3c599294bf093a120ad9d Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 30 Apr 2009 13:56:29 -0700 Subject: [PATCH 52/68] iwlwifi: replace test_and_set_bit by set_bit in clear stations function This patch replaces test_and_set_bit by set_bit since the bit is not tested anyway Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 17a4dd2be1f2..28dd225269ad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -490,7 +490,7 @@ void iwl_clear_stations_table(struct iwl_priv *priv) /* keep track of static keys */ for (i = 0; i < WEP_KEYS_MAX ; i++) { if (priv->wep_keys[i].key_size) - test_and_set_bit(i, &priv->ucode_key_table); + set_bit(i, &priv->ucode_key_table); } spin_unlock_irqrestore(&priv->sta_lock, flags); From 8bce6121706dd82c266c3f527e592abfb3e164d1 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 1 May 2009 08:20:07 -0400 Subject: [PATCH 53/68] wl12xx: correct printk format warnings Fixes warnings: drivers/net/wireless/wl12xx/main.c:87: warning: int format, different type arg (arg 2) drivers/net/wireless/wl12xx/main.c: In function `wl12xx_fetch_nvs': drivers/net/wireless/wl12xx/main.c:125: warning: int format, different type arg (arg 2) drivers/net/wireless/wl12xx/wl1251.c: In function 'wl1251_upload_firmware': drivers/net/wireless/wl12xx/wl1251.c:94: warning: int format, different type arg (arg 2) drivers/net/wireless/wl12xx/wl1251.c:141: warning: int format, different type arg (arg 2) Signed-off-by: Bob Copeland Acked-by: Kalle Valo Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/main.c | 4 ++-- drivers/net/wireless/wl12xx/wl1251.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index 744f4ce5993b..603d6114882e 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -84,7 +84,7 @@ static int wl12xx_fetch_firmware(struct wl12xx *wl) } if (fw->size % 4) { - wl12xx_error("firmware size is not multiple of 32 bits: %d", + wl12xx_error("firmware size is not multiple of 32 bits: %zu", fw->size); ret = -EILSEQ; goto out; @@ -122,7 +122,7 @@ static int wl12xx_fetch_nvs(struct wl12xx *wl) } if (fw->size % 4) { - wl12xx_error("nvs size is not multiple of 32 bits: %d", + wl12xx_error("nvs size is not multiple of 32 bits: %zu", fw->size); ret = -EILSEQ; goto out; diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c index bd0decdcad23..ce1561a41fa4 100644 --- a/drivers/net/wireless/wl12xx/wl1251.c +++ b/drivers/net/wireless/wl12xx/wl1251.c @@ -91,7 +91,7 @@ static int wl1251_upload_firmware(struct wl12xx *wl) fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) | (wl->fw[6] << 8) | (wl->fw[7]); - wl12xx_debug(DEBUG_BOOT, "fw_data_len %d chunk_size %d", fw_data_len, + wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len, CHUNK_SIZE); if ((fw_data_len % 4) != 0) { @@ -138,7 +138,7 @@ static int wl1251_upload_firmware(struct wl12xx *wl) /* 10.4 upload the last chunk */ addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; - wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%d B) 0x%p to 0x%x", + wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x", fw_data_len % CHUNK_SIZE, p, addr); wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE); From 928841b1538df117658ec5977bcf336c27f7747b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 30 Apr 2009 23:02:47 -0700 Subject: [PATCH 54/68] Wireless: remove driver_data direct access of struct device In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: John W. Linville Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: John W. Linville --- drivers/net/wireless/atmel_cs.c | 2 +- drivers/net/wireless/ipw2x00/ipw2100.c | 8 ++-- drivers/net/wireless/ipw2x00/ipw2200.c | 47 +++++++++++---------- drivers/net/wireless/iwlwifi/iwl-agn.c | 20 ++++----- drivers/net/wireless/iwlwifi/iwl3945-base.c | 26 ++++++------ 5 files changed, 53 insertions(+), 50 deletions(-) diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 77406245dc7b..ddaa859c3491 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -279,7 +279,7 @@ static int atmel_config(struct pcmcia_device *link) struct pcmcia_device_id *did; dev = link->priv; - did = handle_to_dev(link).driver_data; + did = dev_get_drvdata(&handle_to_dev(link)); DEBUG(0, "atmel_config(0x%p)\n", link); diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 97e5647ff050..742432388ca3 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -3488,7 +3488,7 @@ static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL); static ssize_t show_cfg(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw2100_priv *p = d->driver_data; + struct ipw2100_priv *p = dev_get_drvdata(d); return sprintf(buf, "0x%08x\n", (int)p->config); } @@ -3497,7 +3497,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL); static ssize_t show_status(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw2100_priv *p = d->driver_data; + struct ipw2100_priv *p = dev_get_drvdata(d); return sprintf(buf, "0x%08x\n", (int)p->status); } @@ -3506,7 +3506,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); static ssize_t show_capability(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw2100_priv *p = d->driver_data; + struct ipw2100_priv *p = dev_get_drvdata(d); return sprintf(buf, "0x%08x\n", (int)p->capability); } @@ -4224,7 +4224,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr, 1 - SW based RF kill active (sysfs) 2 - HW based RF kill active 3 - Both HW and SW baed RF kill active */ - struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data; + struct ipw2100_priv *priv = dev_get_drvdata(d); int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | (rf_kill_active(priv) ? 0x2 : 0x0); return sprintf(buf, "%i\n", val); diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 9a123fbcc359..c3b3dfe43d1a 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -1527,7 +1527,7 @@ static DEVICE_ATTR(led, S_IWUSR | S_IRUGO, show_led, store_led); static ssize_t show_status(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); return sprintf(buf, "0x%08x\n", (int)p->status); } @@ -1536,7 +1536,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); static ssize_t show_cfg(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); return sprintf(buf, "0x%08x\n", (int)p->config); } @@ -1545,7 +1545,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL); static ssize_t show_nic_type(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); return sprintf(buf, "TYPE: %d\n", priv->nic_type); } @@ -1555,7 +1555,7 @@ static ssize_t show_ucode_version(struct device *d, struct device_attribute *attr, char *buf) { u32 len = sizeof(u32), tmp = 0; - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); if (ipw_get_ordinal(p, IPW_ORD_STAT_UCODE_VERSION, &tmp, &len)) return 0; @@ -1569,7 +1569,7 @@ static ssize_t show_rtc(struct device *d, struct device_attribute *attr, char *buf) { u32 len = sizeof(u32), tmp = 0; - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); if (ipw_get_ordinal(p, IPW_ORD_STAT_RTC, &tmp, &len)) return 0; @@ -1586,14 +1586,15 @@ static DEVICE_ATTR(rtc, S_IWUSR | S_IRUGO, show_rtc, NULL); static ssize_t show_eeprom_delay(struct device *d, struct device_attribute *attr, char *buf) { - int n = ((struct ipw_priv *)d->driver_data)->eeprom_delay; + struct ipw_priv *p = dev_get_drvdata(d); + int n = p->eeprom_delay; return sprintf(buf, "%i\n", n); } static ssize_t store_eeprom_delay(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); sscanf(buf, "%i", &p->eeprom_delay); return strnlen(buf, count); } @@ -1605,7 +1606,7 @@ static ssize_t show_command_event_reg(struct device *d, struct device_attribute *attr, char *buf) { u32 reg = 0; - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); reg = ipw_read_reg32(p, IPW_INTERNAL_CMD_EVENT); return sprintf(buf, "0x%08x\n", reg); @@ -1615,7 +1616,7 @@ static ssize_t store_command_event_reg(struct device *d, const char *buf, size_t count) { u32 reg; - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); sscanf(buf, "%x", ®); ipw_write_reg32(p, IPW_INTERNAL_CMD_EVENT, reg); @@ -1629,7 +1630,7 @@ static ssize_t show_mem_gpio_reg(struct device *d, struct device_attribute *attr, char *buf) { u32 reg = 0; - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); reg = ipw_read_reg32(p, 0x301100); return sprintf(buf, "0x%08x\n", reg); @@ -1639,7 +1640,7 @@ static ssize_t store_mem_gpio_reg(struct device *d, const char *buf, size_t count) { u32 reg; - struct ipw_priv *p = d->driver_data; + struct ipw_priv *p = dev_get_drvdata(d); sscanf(buf, "%x", ®); ipw_write_reg32(p, 0x301100, reg); @@ -1653,7 +1654,7 @@ static ssize_t show_indirect_dword(struct device *d, struct device_attribute *attr, char *buf) { u32 reg = 0; - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); if (priv->status & STATUS_INDIRECT_DWORD) reg = ipw_read_reg32(priv, priv->indirect_dword); @@ -1666,7 +1667,7 @@ static ssize_t store_indirect_dword(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); sscanf(buf, "%x", &priv->indirect_dword); priv->status |= STATUS_INDIRECT_DWORD; @@ -1680,7 +1681,7 @@ static ssize_t show_indirect_byte(struct device *d, struct device_attribute *attr, char *buf) { u8 reg = 0; - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); if (priv->status & STATUS_INDIRECT_BYTE) reg = ipw_read_reg8(priv, priv->indirect_byte); @@ -1693,7 +1694,7 @@ static ssize_t store_indirect_byte(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); sscanf(buf, "%x", &priv->indirect_byte); priv->status |= STATUS_INDIRECT_BYTE; @@ -1707,7 +1708,7 @@ static ssize_t show_direct_dword(struct device *d, struct device_attribute *attr, char *buf) { u32 reg = 0; - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); if (priv->status & STATUS_DIRECT_DWORD) reg = ipw_read32(priv, priv->direct_dword); @@ -1720,7 +1721,7 @@ static ssize_t store_direct_dword(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); sscanf(buf, "%x", &priv->direct_dword); priv->status |= STATUS_DIRECT_DWORD; @@ -1747,7 +1748,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr, 1 - SW based RF kill active (sysfs) 2 - HW based RF kill active 3 - Both HW and SW baed RF kill active */ - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | (rf_kill_active(priv) ? 0x2 : 0x0); return sprintf(buf, "%i\n", val); @@ -1791,7 +1792,7 @@ static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio) static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct ipw_priv *priv = d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); ipw_radio_kill_sw(priv, buf[0] == '1'); @@ -1803,7 +1804,7 @@ static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill); static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw_priv *priv = (struct ipw_priv *)d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); int pos = 0, len = 0; if (priv->config & CFG_SPEED_SCAN) { while (priv->speed_scan[pos] != 0) @@ -1818,7 +1819,7 @@ static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr, static ssize_t store_speed_scan(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct ipw_priv *priv = (struct ipw_priv *)d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); int channel, pos = 0; const char *p = buf; @@ -1857,14 +1858,14 @@ static DEVICE_ATTR(speed_scan, S_IWUSR | S_IRUGO, show_speed_scan, static ssize_t show_net_stats(struct device *d, struct device_attribute *attr, char *buf) { - struct ipw_priv *priv = (struct ipw_priv *)d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); return sprintf(buf, "%c\n", (priv->config & CFG_NET_STATS) ? '1' : '0'); } static ssize_t store_net_stats(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct ipw_priv *priv = (struct ipw_priv *)d->driver_data; + struct ipw_priv *priv = dev_get_drvdata(d); if (buf[0] == '1') priv->config |= CFG_NET_STATS; else diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index dd8b15ed8296..6cdee0b4b486 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2268,7 +2268,7 @@ static int iwl_mac_get_stats(struct ieee80211_hw *hw, static ssize_t show_debug_level(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); return sprintf(buf, "0x%08X\n", priv->debug_level); } @@ -2276,7 +2276,7 @@ static ssize_t store_debug_level(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); unsigned long val; int ret; @@ -2299,7 +2299,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, static ssize_t show_version(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); struct iwl_alive_resp *palive = &priv->card_alive; ssize_t pos = 0; u16 eeprom_ver; @@ -2330,7 +2330,7 @@ static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL); static ssize_t show_temperature(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); if (!iwl_is_alive(priv)) return -EAGAIN; @@ -2343,7 +2343,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); static ssize_t show_tx_power(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); if (!iwl_is_ready_rf(priv)) return sprintf(buf, "off\n"); @@ -2355,7 +2355,7 @@ static ssize_t store_tx_power(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); unsigned long val; int ret; @@ -2373,7 +2373,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); static ssize_t show_flags(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); return sprintf(buf, "0x%04X\n", priv->active_rxon.flags); } @@ -2382,7 +2382,7 @@ static ssize_t store_flags(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); unsigned long val; u32 flags; int ret = strict_strtoul(buf, 0, &val); @@ -2411,7 +2411,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); static ssize_t show_filter_flags(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); return sprintf(buf, "0x%04X\n", le32_to_cpu(priv->active_rxon.filter_flags)); @@ -2421,7 +2421,7 @@ static ssize_t store_filter_flags(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); unsigned long val; u32 filter_flags; int ret = strict_strtoul(buf, 0, &val); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index dc0359ce1ec0..9f5191a84a13 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3595,7 +3595,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, static ssize_t show_debug_level(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); return sprintf(buf, "0x%08X\n", priv->debug_level); } @@ -3603,7 +3603,7 @@ static ssize_t store_debug_level(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); unsigned long val; int ret; @@ -3624,7 +3624,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, static ssize_t show_temperature(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); if (!iwl_is_alive(priv)) return -EAGAIN; @@ -3637,7 +3637,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); static ssize_t show_tx_power(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); return sprintf(buf, "%d\n", priv->tx_power_user_lmt); } @@ -3645,7 +3645,7 @@ static ssize_t store_tx_power(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); char *p = (char *)buf; u32 val; @@ -3663,7 +3663,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); static ssize_t show_flags(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); return sprintf(buf, "0x%04X\n", priv->active_rxon.flags); } @@ -3672,7 +3672,7 @@ static ssize_t store_flags(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); u32 flags = simple_strtoul(buf, NULL, 0); mutex_lock(&priv->mutex); @@ -3697,7 +3697,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); static ssize_t show_filter_flags(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); return sprintf(buf, "0x%04X\n", le32_to_cpu(priv->active_rxon.filter_flags)); @@ -3707,7 +3707,7 @@ static ssize_t store_filter_flags(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); u32 filter_flags = simple_strtoul(buf, NULL, 0); mutex_lock(&priv->mutex); @@ -3992,7 +3992,7 @@ static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna); static ssize_t show_status(struct device *d, struct device_attribute *attr, char *buf) { - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + struct iwl_priv *priv = dev_get_drvdata(d); if (!iwl_is_alive(priv)) return -EAGAIN; return sprintf(buf, "0x%08x\n", (int)priv->status); @@ -4004,10 +4004,11 @@ static ssize_t dump_error_log(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { + struct iwl_priv *priv = dev_get_drvdata(d); char *p = (char *)buf; if (p[0] == '1') - iwl3945_dump_nic_error_log((struct iwl_priv *)d->driver_data); + iwl3945_dump_nic_error_log(priv); return strnlen(buf, count); } @@ -4018,10 +4019,11 @@ static ssize_t dump_event_log(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { + struct iwl_priv *priv = dev_get_drvdata(d); char *p = (char *)buf; if (p[0] == '1') - iwl3945_dump_nic_event_log((struct iwl_priv *)d->driver_data); + iwl3945_dump_nic_event_log(priv); return strnlen(buf, count); } From 13792578c88961256dd30e3a5d3fa1ac1ec9a7e0 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 1 May 2009 13:12:36 +0200 Subject: [PATCH 55/68] p54usb: Fixes compile error with CONFIG_PM=n /drivers/net/wireless/p54/p54usb.c: In function 'p54u_probe': /drivers/net/wireless/p54/p54usb.c:923: error: 'struct usb_device' has no member named 'reset_resume' In the struct usb_device the reset_resume attribute is only available when CONFIG_PM is defined. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index ec6c95474f1a..f40c0f468b27 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -919,9 +919,11 @@ static int __devinit p54u_probe(struct usb_interface *intf, priv->common.open = p54u_open; priv->common.stop = p54u_stop; if (recognized_pipes < P54U_PIPE_NUMBER) { +#ifdef CONFIG_PM /* ISL3887 needs a full reset on resume */ udev->reset_resume = 1; err = p54u_device_reset(dev); +#endif priv->hw_type = P54U_3887; dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); From 1b06bb4087d195d8289919df2f4d95ec3b89769e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Sat, 2 May 2009 00:34:48 -0400 Subject: [PATCH 56/68] cfg80211: make nl80211_send_mlme_timeout() static Fixes sparse complaint: CHECK net/wireless/nl80211.c net/wireless/nl80211.c:3694:6: warning: symbol 'nl80211_send_mlme_timeout' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b1fc98225fd1..3c53c5cbc3a9 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3696,9 +3696,9 @@ void nl80211_send_disassoc(struct cfg80211_registered_device *rdev, NL80211_CMD_DISASSOCIATE); } -void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev, - struct net_device *netdev, int cmd, - const u8 *addr) +static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev, + struct net_device *netdev, int cmd, + const u8 *addr) { struct sk_buff *msg; void *hdr; From 7738231f98578c8cd5b367441b4aa79ce864856f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 4 May 2009 17:52:10 +0200 Subject: [PATCH 57/68] mac80211: report operating frequency rather than current It's not very helpful to see, in iwconfig, the current frequency the card is tuned to if that frequency is currently somewhere across the board because we're scanning. Since we keep track of the frequency the user wants, display that instead. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/wext.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 1a649da42c41..6b4eb8d43a4e 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -185,7 +185,7 @@ static int ieee80211_ioctl_giwfreq(struct net_device *dev, if (sdata->vif.type == NL80211_IFTYPE_ADHOC) return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra); - freq->m = local->hw.conf.channel->center_freq; + freq->m = local->oper_channel->center_freq; freq->e = 6; return 0; From 8a7130404948b966e98b1285e777972b4b3f2fa2 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 4 May 2009 20:46:25 +0400 Subject: [PATCH 58/68] ar9170: fix build when !CONFIG_PM Fix this build error when CONFIG_PM is not set: drivers/net/wireless/ath/ar9170/usb.c: In function 'ar9170_usb_probe': drivers/net/wireless/ath/ar9170/usb.c:692: error: 'struct usb_device' has no member named 'reset_resume' Signed-off-by: Alexander Beregalov Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index d7b562dcebd2..d7c13c0177ca 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -689,7 +689,9 @@ static int ar9170_usb_probe(struct usb_interface *intf, aru->common.exec_cmd = ar9170_usb_exec_cmd; aru->common.callback_cmd = ar9170_usb_callback_cmd; +#ifdef CONFIG_PM udev->reset_resume = 1; +#endif err = ar9170_usb_reset(aru); if (err) goto err_freehw; From 83f8b478ff5ed7d7df0bf91336bbede7b4714771 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 6 May 2009 14:16:15 -0400 Subject: [PATCH 59/68] p54: correct merge damage from "p54: more SoftLED updates" Ooops... Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index 7fda1a9e263b..db3df947d8ed 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -189,10 +189,10 @@ struct p54_common { unsigned long *used_rxkeys; /* LED management */ -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS struct p54_led_dev leds[4]; struct delayed_work led_work; -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ u16 softled_state; /* bit field of glowing LEDs */ /* statistics */ From 6cfe62cd58da862db04d4eb61f218f65b0cedbb3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 5 May 2009 15:48:39 -0400 Subject: [PATCH 60/68] mac80211: Fix sparse warning for ssid_len on ieee80211_sta_config_auth() net/mac80211/mlme.c:2079:28: warning: symbol 'ssid_len' shadows an earlier one net/mac80211/mlme.c:2022:12: originally declared here ssid_len is already being declared and checked above so there is no need for it again. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5509c5aa6beb..75c487229f2e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2076,10 +2076,6 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata) return 0; } else { if (ifmgd->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) { - u8 ssid_len = 0; - - if (!(ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL)) - ssid_len = ifmgd->ssid_len; ifmgd->assoc_scan_tries++; From 358623c22c9fd837b3b1b444377037f72553dc9f Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 5 May 2009 19:46:08 +0200 Subject: [PATCH 61/68] rt2x00: Simplify rt2x00_check_rev rt2x00_check_rev() was too specific for rt2500usb and rt73usb, by adding the mask argument (instead of hardcoding it into the function itself) we can use the function in rt2800usb as well. v2: Fix revision mask for rt2800usb Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 2 +- drivers/net/wireless/rt2x00/rt2800usb.c | 7 ++++--- drivers/net/wireless/rt2x00/rt2x00.h | 7 +++---- drivers/net/wireless/rt2x00/rt73usb.c | 3 ++- 4 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 08e88333b0ff..1debb88bc60e 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1559,7 +1559,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2570, value, reg); - if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) { + if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) { ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); return -ENODEV; } diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index cf4a97f32ab3..257bfb5483c9 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -2348,9 +2348,10 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * The check for rt2860 is not a typo, some rt2870 hardware * identifies itself as rt2860 in the CSR register. */ - if ((rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x2860) && - (rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x2870) && - (rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x3070)) { + if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) && + !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) && + !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) && + !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) { ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); return -ENODEV; } diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 8d933ee30583..419b1b9f998e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -915,11 +915,10 @@ static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset) return chipset->rev; } -static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset, - const u32 rev) +static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset, + const u32 mask, const u32 rev) { - return (((chipset->rev & 0xffff0) == rev) && - !!(chipset->rev & 0x0000f)); + return ((chipset->rev & mask) == rev); } /** diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 6bd28a6bcef2..d10af3687a8e 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1846,7 +1846,8 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2571, value, reg); - if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) { + if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) || + !rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); return -ENODEV; } From 2d3babd11f91501f49c6af212e6795bd8954f4d4 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 5 May 2009 20:35:13 +0300 Subject: [PATCH 62/68] mac80211: Use a shared function to release frames from RX reorder buf No need to duplicate the same code in two places (and that would be three after the followup patch). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/rx.c | 70 +++++++++++++++++++++-------------------------- 1 file changed, 31 insertions(+), 39 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 6a9d89b392e3..9f2a29d1890b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2284,6 +2284,34 @@ static inline u16 seq_sub(u16 sq1, u16 sq2) } +static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw, + struct tid_ampdu_rx *tid_agg_rx, + int index) +{ + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + struct ieee80211_rx_status status; + + if (!tid_agg_rx->reorder_buf[index]) + goto no_frame; + + /* release the reordered frames to stack */ + memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, sizeof(status)); + sband = hw->wiphy->bands[status.band]; + if (status.flag & RX_FLAG_HT) + rate = sband->bitrates; /* TODO: HT rates */ + else + rate = &sband->bitrates[status.rate_idx]; + __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index], + &status, rate); + tid_agg_rx->stored_mpdu_num--; + tid_agg_rx->reorder_buf[index] = NULL; + +no_frame: + tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); +} + + /* * As it function blongs to Rx path it must be called with * the proper rcu_read_lock protection for its flow. @@ -2295,12 +2323,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, u16 mpdu_seq_num, int bar_req) { - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_rx_status status; u16 head_seq_num, buf_size; int index; - struct ieee80211_supported_band *sband; - struct ieee80211_rate *rate; buf_size = tid_agg_rx->buf_size; head_seq_num = tid_agg_rx->head_seq_num; @@ -2325,28 +2349,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; - - if (tid_agg_rx->reorder_buf[index]) { - /* release the reordered frames to stack */ - memcpy(&status, - tid_agg_rx->reorder_buf[index]->cb, - sizeof(status)); - sband = local->hw.wiphy->bands[status.band]; - if (status.flag & RX_FLAG_HT) { - /* TODO: HT rates */ - rate = sband->bitrates; - } else { - rate = &sband->bitrates - [status.rate_idx]; - } - __ieee80211_rx_handle_packet(hw, - tid_agg_rx->reorder_buf[index], - &status, rate); - tid_agg_rx->stored_mpdu_num--; - tid_agg_rx->reorder_buf[index] = NULL; - } - tid_agg_rx->head_seq_num = - seq_inc(tid_agg_rx->head_seq_num); + ieee80211_release_reorder_frame(hw, tid_agg_rx, + index); } if (bar_req) return 1; @@ -2380,19 +2384,7 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; while (tid_agg_rx->reorder_buf[index]) { - /* release the reordered frame back to stack */ - memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, - sizeof(status)); - sband = local->hw.wiphy->bands[status.band]; - if (status.flag & RX_FLAG_HT) - rate = sband->bitrates; /* TODO: HT rates */ - else - rate = &sband->bitrates[status.rate_idx]; - __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index], - &status, rate); - tid_agg_rx->stored_mpdu_num--; - tid_agg_rx->reorder_buf[index] = NULL; - tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); + ieee80211_release_reorder_frame(hw, tid_agg_rx, index); index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; } From 4d050f1daed3babf6fcc337f862a245d31af4452 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 5 May 2009 20:35:14 +0300 Subject: [PATCH 63/68] mac80211: Add a timeout for frames in the RX reorder buffer This patch allows skbs to be released from the RX reorder buffer in case they have been there for an unexpectedly long time without us having received the missing frames before them. Previously, these frames were only released when the reorder window moved and that could take very long time unless new frames were received constantly (e.g., TCP connections could be killed more or less indefinitely). This situation should not happen very frequently, but it looks like there are some scenarious that trigger it for some reason. As such, this should be considered mostly a workaround to speed up recovery from unexpected siutation that could result in connections hanging for long periods of time. The changes here will only check for timeout situation when adding new RX frames to the reorder buffer. It does not handle all possible cases, but seems to help for most cases that could result from common network usage (e.g., TCP retrying at least couple of times). For more completely coverage, a timer could be used to periodically check whether there are any frames remaining in the reorder buffer if no new frames are received. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/agg-rx.c | 8 ++++++- net/mac80211/rx.c | 47 ++++++++++++++++++++++++++++++++++++++++- net/mac80211/sta_info.h | 2 ++ 3 files changed, 55 insertions(+), 2 deletions(-) diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index fff24c3d6460..bc064d7933ff 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -68,6 +68,7 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, spin_lock_bh(&sta->lock); /* free resources */ kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_buf); + kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_time); if (!sta->ampdu_mlme.tid_rx[tid]->shutdown) { kfree(sta->ampdu_mlme.tid_rx[tid]); @@ -268,13 +269,18 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, /* prepare reordering buffer */ tid_agg_rx->reorder_buf = kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC); - if (!tid_agg_rx->reorder_buf) { + tid_agg_rx->reorder_time = + kcalloc(buf_size, sizeof(unsigned long), GFP_ATOMIC); + if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) { #ifdef CONFIG_MAC80211_HT_DEBUG if (net_ratelimit()) printk(KERN_ERR "can not allocate reordering buffer " "to tid %d\n", tid); #endif + kfree(tid_agg_rx->reorder_buf); + kfree(tid_agg_rx->reorder_time); kfree(sta->ampdu_mlme.tid_rx[tid]); + sta->ampdu_mlme.tid_rx[tid] = NULL; goto end; } diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 9f2a29d1890b..24d41705ac0b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2312,6 +2312,15 @@ static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw, } +/* + * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If + * the skb was added to the buffer longer than this time ago, the earlier + * frames that have not yet been received are assumed to be lost and the skb + * can be released for processing. This may also release other skb's from the + * reorder buffer if there are no additional gaps between the frames. + */ +#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10) + /* * As it function blongs to Rx path it must be called with * the proper rcu_read_lock protection for its flow. @@ -2377,13 +2386,49 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, /* put the frame in the reordering buffer */ tid_agg_rx->reorder_buf[index] = skb; + tid_agg_rx->reorder_time[index] = jiffies; memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus, sizeof(*rxstatus)); tid_agg_rx->stored_mpdu_num++; /* release the buffer until next missing frame */ index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; - while (tid_agg_rx->reorder_buf[index]) { + if (!tid_agg_rx->reorder_buf[index] && + tid_agg_rx->stored_mpdu_num > 1) { + /* + * No buffers ready to be released, but check whether any + * frames in the reorder buffer have timed out. + */ + int j; + int skipped = 1; + for (j = (index + 1) % tid_agg_rx->buf_size; j != index; + j = (j + 1) % tid_agg_rx->buf_size) { + if (tid_agg_rx->reorder_buf[j] == NULL) { + skipped++; + continue; + } + if (!time_after(jiffies, tid_agg_rx->reorder_time[j] + + HZ / 10)) + break; + +#ifdef CONFIG_MAC80211_HT_DEBUG + if (net_ratelimit()) + printk(KERN_DEBUG "%s: release an RX reorder " + "frame due to timeout on earlier " + "frames\n", + wiphy_name(hw->wiphy)); +#endif + ieee80211_release_reorder_frame(hw, tid_agg_rx, j); + + /* + * Increment the head seq# also for the skipped slots. + */ + tid_agg_rx->head_seq_num = + (tid_agg_rx->head_seq_num + skipped) & + SEQ_MASK; + skipped = 0; + } + } else while (tid_agg_rx->reorder_buf[index]) { ieee80211_release_reorder_frame(hw, tid_agg_rx, index); index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 31a8990ce401..164b16cbe0a5 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -88,6 +88,7 @@ struct tid_ampdu_tx { * struct tid_ampdu_rx - TID aggregation information (Rx). * * @reorder_buf: buffer to reorder incoming aggregated MPDUs + * @reorder_time: jiffies when skb was added * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value) * @head_seq_num: head sequence number in reordering buffer. * @stored_mpdu_num: number of MPDUs in reordering buffer @@ -99,6 +100,7 @@ struct tid_ampdu_tx { */ struct tid_ampdu_rx { struct sk_buff **reorder_buf; + unsigned long *reorder_time; struct timer_list session_timer; u16 head_seq_num; u16 stored_mpdu_num; From aec6795210db6ba3f4592056d41ac5b1ab41e980 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 5 May 2009 20:35:15 +0300 Subject: [PATCH 64/68] mac80211: Comment the order of HT RX reorder handler vs. RX handlers We are currently processing block ack reordering as a separate task before all other RX handlers. In theory, this is wrong since this step should be done only after duplicate removal (see Figure 6-1 in IEEE 802.11n). However, moving this needs some work and the current situation is not too bad. Add a comment here so that this small detail does not get forgotten and who knows, maybe someone has some extra time to take a look at cleaning this up. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/rx.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 24d41705ac0b..d052f4004829 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2551,6 +2551,18 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, return; } + /* + * In theory, the block ack reordering should happen after duplicate + * removal (ieee80211_rx_h_check(), which is an RX handler). As such, + * the call to ieee80211_rx_reorder_ampdu() should really be moved to + * happen as a new RX handler between ieee80211_rx_h_check and + * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for + * the time being, the call can be here since RX reorder buf processing + * will implicitly skip duplicates. We could, in theory at least, + * process frames that ieee80211_rx_h_passive_scan would drop (e.g., + * frames from other than operational channel), but that should not + * happen in normal networks. + */ if (!ieee80211_rx_reorder_ampdu(local, skb, status)) __ieee80211_rx_handle_packet(hw, skb, status, rate); From 7c5a189dc6a43def594fedc7cd8f6886596b65de Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Wed, 6 May 2009 01:47:02 +0400 Subject: [PATCH 65/68] p54: call p54_wake_free_queues on every p54_free_skb and p54_rx_frame_sent Currently queues are stopped when their length reaches their length limit, but are restarted only when the size of freed range of packet buffer is not less than the size of the largest possible packet. This causes permanent queue stop on radio visibility loss in the middle of ping series: there is plenty of room in the packet buffer, but it is never freed more than 3 (size of 'best effort' queue) * 288 (ping packet plus headers) bytes at once. Signed-off-by: Max Filippov Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index b85785291803..48d81d98e12d 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -822,7 +822,6 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_tx_info *info; struct p54_tx_info *range; unsigned long flags; - u32 freed = 0, last_addr = priv->rx_start; if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue))) return; @@ -842,7 +841,6 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) ni = IEEE80211_SKB_CB(skb->prev); mr = (struct p54_tx_info *)ni->rate_driver_data; - last_addr = mr->end_addr; } if (skb->next != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *ni; @@ -850,16 +848,11 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) ni = IEEE80211_SKB_CB(skb->next); mr = (struct p54_tx_info *)ni->rate_driver_data; - freed = mr->start_addr - last_addr; - } else - freed = priv->rx_end - last_addr; + } __skb_unlink(skb, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); dev_kfree_skb_any(skb); - - if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 + - IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom) - p54_wake_free_queues(dev); + p54_wake_free_queues(dev); } EXPORT_SYMBOL_GPL(p54_free_skb); @@ -893,8 +886,6 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct sk_buff *entry; u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom; struct p54_tx_info *range = NULL; - u32 freed = 0; - u32 last_addr = priv->rx_start; unsigned long flags; int count, idx; @@ -908,7 +899,6 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) range = (void *)info->rate_driver_data; if (range->start_addr != addr) { - last_addr = range->end_addr; entry = entry->next; continue; } @@ -919,11 +909,8 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) ni = IEEE80211_SKB_CB(entry->next); mr = (struct p54_tx_info *)ni->rate_driver_data; - freed = mr->start_addr - last_addr; - } else - freed = priv->rx_end - last_addr; + } - last_addr = range->end_addr; __skb_unlink(entry, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); @@ -1010,9 +997,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) spin_unlock_irqrestore(&priv->tx_queue.lock, flags); out: - if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 + - IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom) - p54_wake_free_queues(dev); + p54_wake_free_queues(dev); } static void p54_rx_eeprom_readback(struct ieee80211_hw *dev, From 4f0fc7c39f2a224b939f22d4dca552b266319525 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 6 May 2009 02:20:00 -0400 Subject: [PATCH 66/68] ath9k: make private driver rate tables const On x86 this allows us to do the following small savings: shave off 23 % off of the module's data, and shave off 6 % off of the module's text. We save 456 bytes, for those counting. $ size ath9k.ko text data bss dec hex filename 250794 3628 1600 256022 3e816 ath9k.ko $ size ath9k-old.ko text data bss dec hex filename 239114 15308 1600 256022 3e816 ath9k-old.ko $ du -b ath9k.ko 4034244 ath9k.ko $ du -b ath9k-old.ko 4033788 ath9k-old.ko Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 4 +- drivers/net/wireless/ath/ath9k/beacon.c | 2 +- drivers/net/wireless/ath/ath9k/hw.c | 2 +- drivers/net/wireless/ath/ath9k/hw.h | 3 +- drivers/net/wireless/ath/ath9k/main.c | 2 +- drivers/net/wireless/ath/ath9k/rc.c | 61 +++++++++++++------------ drivers/net/wireless/ath/ath9k/xmit.c | 8 ++-- 7 files changed, 43 insertions(+), 39 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 90b6314a8169..10ffc9442859 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -576,8 +576,8 @@ struct ath_softc { struct ath_tx tx; struct ath_beacon beacon; struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX]; - struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX]; - struct ath_rate_table *cur_rate_table; + const struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX]; + const struct ath_rate_table *cur_rate_table; struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; struct ath_led radio_led; diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index c17b8382e328..3a7154beeae1 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -63,7 +63,7 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp, struct ath_hw *ah = sc->sc_ah; struct ath_desc *ds; struct ath9k_11n_rate_series series[4]; - struct ath_rate_table *rt; + const struct ath_rate_table *rt; int flags, antenna, ctsrate = 0, ctsduration = 0; u8 rate; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 02f40154e831..041c0f518ac7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -168,7 +168,7 @@ bool ath9k_get_channel_edges(struct ath_hw *ah, } u16 ath9k_hw_computetxtime(struct ath_hw *ah, - struct ath_rate_table *rates, + const struct ath_rate_table *rates, u32 frameLen, u16 rateix, bool shortPreamble) { diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index ab3412672e36..ddb24c47ebcf 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -580,7 +580,8 @@ bool ath9k_hw_setantennaswitch(struct ath_hw *ah, bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout); u32 ath9k_hw_reverse_bits(u32 val, u32 n); bool ath9k_get_channel_edges(struct ath_hw *ah, u16 flags, u16 *low, u16 *high); -u16 ath9k_hw_computetxtime(struct ath_hw *ah, struct ath_rate_table *rates, +u16 ath9k_hw_computetxtime(struct ath_hw *ah, + const struct ath_rate_table *rates, u32 frameLen, u16 rateix, bool shortPreamble); void ath9k_hw_get_channel_centers(struct ath_hw *ah, struct ath9k_channel *chan, diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index d3dc8e2c77b2..bbbfdcde2727 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -189,7 +189,7 @@ static u8 parse_mpdudensity(u8 mpdudensity) static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) { - struct ath_rate_table *rate_table = NULL; + const struct ath_rate_table *rate_table = NULL; struct ieee80211_supported_band *sband; struct ieee80211_rate *rate; int i, maxrates; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index e526dbce57d1..ba06e78b2f50 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -17,7 +17,7 @@ #include "ath9k.h" -static struct ath_rate_table ar5416_11na_ratetable = { +static const struct ath_rate_table ar5416_11na_ratetable = { 42, { { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ @@ -155,7 +155,7 @@ static struct ath_rate_table ar5416_11na_ratetable = { /* 4ms frame limit not used for NG mode. The values filled * for HT are the 64K max aggregate limit */ -static struct ath_rate_table ar5416_11ng_ratetable = { +static const struct ath_rate_table ar5416_11ng_ratetable = { 46, { { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ @@ -302,7 +302,7 @@ static struct ath_rate_table ar5416_11ng_ratetable = { WLAN_RC_HT_FLAG, /* Phy rates allowed initially */ }; -static struct ath_rate_table ar5416_11a_ratetable = { +static const struct ath_rate_table ar5416_11a_ratetable = { 8, { { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ @@ -335,7 +335,7 @@ static struct ath_rate_table ar5416_11a_ratetable = { 0, /* Phy rates allowed initially */ }; -static struct ath_rate_table ar5416_11g_ratetable = { +static const struct ath_rate_table ar5416_11g_ratetable = { 12, { { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ @@ -380,7 +380,7 @@ static struct ath_rate_table ar5416_11g_ratetable = { 0, /* Phy rates allowed initially */ }; -static struct ath_rate_table ar5416_11b_ratetable = { +static const struct ath_rate_table ar5416_11b_ratetable = { 4, { { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ @@ -420,7 +420,7 @@ static inline int8_t median(int8_t a, int8_t b, int8_t c) } } -static void ath_rc_sort_validrates(struct ath_rate_table *rate_table, +static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table, struct ath_rate_priv *ath_rc_priv) { u8 i, j, idx, idx_next; @@ -461,10 +461,11 @@ static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv, return ath_rc_priv->valid_rate_index[index]; } -static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, - struct ath_rate_priv *ath_rc_priv, - u8 cur_valid_txrate, - u8 *next_idx) +static inline +int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table, + struct ath_rate_priv *ath_rc_priv, + u8 cur_valid_txrate, + u8 *next_idx) { u8 i; @@ -500,7 +501,7 @@ static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) } static inline int -ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table, +ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table, struct ath_rate_priv *ath_rc_priv, u8 cur_valid_txrate, u8 *next_idx) { @@ -517,7 +518,7 @@ ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table, } static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, + const struct ath_rate_table *rate_table, u32 capflag) { u8 i, hi = 0; @@ -547,7 +548,7 @@ static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv, } static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, + const struct ath_rate_table *rate_table, struct ath_rateset *rateset, u32 capflag) { @@ -592,7 +593,7 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv, } static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, + const struct ath_rate_table *rate_table, u8 *mcs_set, u32 capflag) { struct ath_rateset *rateset = (struct ath_rateset *)mcs_set; @@ -630,7 +631,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv, static u8 ath_rc_ratefind_ht(struct ath_softc *sc, struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, + const struct ath_rate_table *rate_table, int *is_probing) { u32 dt, best_thruput, this_thruput, now_msec; @@ -748,7 +749,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, return rate; } -static void ath_rc_rate_set_series(struct ath_rate_table *rate_table, +static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table, struct ieee80211_tx_rate *rate, struct ieee80211_tx_rate_control *txrc, u8 tries, u8 rix, int rtsctsenable) @@ -769,7 +770,7 @@ static void ath_rc_rate_set_series(struct ath_rate_table *rate_table, } static void ath_rc_rate_set_rtscts(struct ath_softc *sc, - struct ath_rate_table *rate_table, + const struct ath_rate_table *rate_table, struct ieee80211_tx_info *tx_info) { struct ieee80211_tx_rate *rates = tx_info->control.rates; @@ -807,7 +808,7 @@ static void ath_rc_rate_set_rtscts(struct ath_softc *sc, static u8 ath_rc_rate_getidx(struct ath_softc *sc, struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, + const struct ath_rate_table *rate_table, u8 rix, u16 stepdown, u16 min_rate) { @@ -838,7 +839,7 @@ static void ath_rc_ratefind(struct ath_softc *sc, struct ath_rate_priv *ath_rc_priv, struct ieee80211_tx_rate_control *txrc) { - struct ath_rate_table *rate_table; + const struct ath_rate_table *rate_table; struct sk_buff *skb = txrc->skb; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_tx_rate *rates = tx_info->control.rates; @@ -937,7 +938,7 @@ static void ath_rc_ratefind(struct ath_softc *sc, } static bool ath_rc_update_per(struct ath_softc *sc, - struct ath_rate_table *rate_table, + const struct ath_rate_table *rate_table, struct ath_rate_priv *ath_rc_priv, struct ath_tx_info_priv *tx_info_priv, int tx_rate, int xretries, int retries, @@ -1142,7 +1143,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, int rate; u8 last_per; bool state_change = false; - struct ath_rate_table *rate_table = sc->cur_rate_table; + const struct ath_rate_table *rate_table = sc->cur_rate_table; int size = ath_rc_priv->rate_table_size; if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt)) @@ -1276,7 +1277,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, #undef CHK_RSSI } -static int ath_rc_get_rateindex(struct ath_rate_table *rate_table, +static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table, struct ieee80211_tx_rate *rate) { int rix; @@ -1300,7 +1301,7 @@ static void ath_rc_tx_status(struct ath_softc *sc, int final_ts_idx, int xretries, int long_retry) { struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); - struct ath_rate_table *rate_table; + const struct ath_rate_table *rate_table; struct ieee80211_tx_rate *rates = tx_info->status.rates; u8 flags; u32 i = 0, rix; @@ -1354,9 +1355,11 @@ static void ath_rc_tx_status(struct ath_softc *sc, xretries, long_retry); } -static struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc, - enum ieee80211_band band, - bool is_ht, bool is_cw_40) +static const +struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc, + enum ieee80211_band band, + bool is_ht, + bool is_cw_40) { int mode = 0; @@ -1390,7 +1393,7 @@ static void ath_rc_init(struct ath_softc *sc, struct ath_rate_priv *ath_rc_priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, - struct ath_rate_table *rate_table) + const struct ath_rate_table *rate_table) { struct ath_rateset *rateset = &ath_rc_priv->neg_rates; u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates; @@ -1587,7 +1590,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, { struct ath_softc *sc = priv; struct ath_rate_priv *ath_rc_priv = priv_sta; - struct ath_rate_table *rate_table = NULL; + const struct ath_rate_table *rate_table = NULL; bool is_cw40, is_sgi40; int i, j = 0; @@ -1636,7 +1639,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband, { struct ath_softc *sc = priv; struct ath_rate_priv *ath_rc_priv = priv_sta; - struct ath_rate_table *rate_table = NULL; + const struct ath_rate_table *rate_table = NULL; bool oper_cw40 = false, oper_sgi40; bool local_cw40 = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG) ? true : false; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 501493ffc3a7..41c42824a5ca 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -434,7 +434,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf, struct ath_atx_tid *tid) { - struct ath_rate_table *rate_table = sc->cur_rate_table; + const struct ath_rate_table *rate_table = sc->cur_rate_table; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; struct ieee80211_tx_rate *rates; @@ -497,7 +497,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf, static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid, struct ath_buf *bf, u16 frmlen) { - struct ath_rate_table *rt = sc->cur_rate_table; + const struct ath_rate_table *rt = sc->cur_rate_table; struct sk_buff *skb = bf->bf_mpdu; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); u32 nsymbits, nsymbols, mpdudensity; @@ -1407,7 +1407,7 @@ static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb, static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf, int width, int half_gi, bool shortPreamble) { - struct ath_rate_table *rate_table = sc->cur_rate_table; + const struct ath_rate_table *rate_table = sc->cur_rate_table; u32 nbits, nsymbits, duration, nsymbols; u8 rc; int streams, pktlen; @@ -1439,7 +1439,7 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf, static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) { - struct ath_rate_table *rt = sc->cur_rate_table; + const struct ath_rate_table *rt = sc->cur_rate_table; struct ath9k_11n_rate_series series[4]; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; From f9dd6b52873ad9fda51a3881c80c96d06ee6a57d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 6 May 2009 09:47:30 +0200 Subject: [PATCH 67/68] ath9k: remove redundant AR9285 checks The AR_SREV_9285_1[12]_OR_LATER macros already contains the AR_SREV_9285 check. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/calib.c | 6 +++--- drivers/net/wireless/ath/ath9k/hw.c | 3 +-- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index a197041d76b5..a32d7e7fecbe 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -863,7 +863,7 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan, } if (longcal) { - if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah)) + if (AR_SREV_9285_11_OR_LATER(ah)) ath9k_hw_9285_pa_cal(ah); if (OLC_FOR_AR9280_20_LATER) @@ -917,7 +917,7 @@ static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan) bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) { - if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) { + if (AR_SREV_9285_12_OR_LATER(ah)) { if (!ar9285_clc(ah, chan)) return false; } else { @@ -947,7 +947,7 @@ bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) } /* Do PA Calibration */ - if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah)) + if (AR_SREV_9285_11_OR_LATER(ah)) ath9k_hw_9285_pa_cal(ah); /* Do NF Calibration after DC offset and other calibrations */ diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 041c0f518ac7..5879c731e9e7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1345,8 +1345,7 @@ static int ath9k_hw_process_ini(struct ath_hw *ah, if (AR_SREV_9280(ah)) REG_WRITE_ARRAY(&ah->iniModesRxGain, modesIndex, regWrites); - if (AR_SREV_9280(ah) || (AR_SREV_9285(ah) && - AR_SREV_9285_12_OR_LATER(ah))) + if (AR_SREV_9280(ah) || AR_SREV_9285_12_OR_LATER(ah)) REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites); for (i = 0; i < ah->iniCommon.ia_rows; i++) { From 9dfd6ba353b993d648dcda72480c7ce92cd27c7e Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 6 May 2009 20:34:10 +0300 Subject: [PATCH 68/68] mac80211: Update SA Query transaction id length IEEE 802.11w/D8.0 changed the length of the SA Query transaction identifier from 16 to 2 octets. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index c52e7fba4e40..dc92359f37e6 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -543,7 +543,7 @@ struct ieee80211_tim_ie { u8 virtual_map[1]; } __attribute__ ((packed)); -#define WLAN_SA_QUERY_TR_ID_LEN 16 +#define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { __le16 frame_control;