openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

iwlwifi: allow different csr flags for different device families 

Different device families may have different flag values
for passing a message to the fw (i.e. SW_RESET).
In order to keep the code readable, and avoid conditioning
upon the family, store a value for each flag, which indicates
the bit that needs to be enabled.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This commit is contained in:
Golan Ben Ami 2017-10-22 15:58:26 +03:00 committed by Luca Coelho
parent 0ddcf3e76a
commit a8cbb46f83
16 changed files with 184 additions and 92 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/net/wireless/intel/iwlwifi/cfg/1000.c
View File

@ -1,6 +1,7 @@
/******************************************************************************
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@ -27,7 +28,6 @@
#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
#include "iwl-csr.h"
#include "iwl-agn-hw.h"
/* Highest firmware API version supported */
@ -91,7 +91,8 @@ static const struct iwl_eeprom_params iwl1000_eeprom_params = {
.base_params = &iwl1000_base_params, \
.eeprom_params = &iwl1000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl1000_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
@ -117,7 +118,8 @@ const struct iwl_cfg iwl1000_bg_cfg = {
.eeprom_params = &iwl1000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl100_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BGN",

13
drivers/net/wireless/intel/iwlwifi/cfg/2000.c
View File

@ -1,6 +1,7 @@
/******************************************************************************
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@ -115,7 +116,8 @@ static const struct iwl_eeprom_params iwl20x0_eeprom_params = {
.base_params = &iwl2000_base_params, \
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl2000_2bgn_cfg = {
@ -142,7 +144,8 @@ const struct iwl_cfg iwl2000_2bgn_d_cfg = {
.base_params = &iwl2030_base_params, \
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl2030_2bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 2230 BGN",
@ -163,7 +166,8 @@ const struct iwl_cfg iwl2030_2bgn_cfg = {
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl105_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 105 BGN",
@ -190,7 +194,8 @@ const struct iwl_cfg iwl105_bgn_d_cfg = {
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl135_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 135 BGN",

7
drivers/net/wireless/intel/iwlwifi/cfg/22000.c
View File

@ -143,6 +143,7 @@ const struct iwl_cfg iwl22000_2ac_cfg_hr = {
.name = "Intel(R) Dual Band Wireless AC 22000",
.fw_name_pre = IWL_22000_HR_FW_PRE,
IWL_DEVICE_22000,
.csr = &iwl_csr_v1,
.ht_params = &iwl_22000_ht_params,
.nvm_ver = IWL_22000_NVM_VERSION,
.nvm_calib_ver = IWL_22000_TX_POWER_VERSION,
@ -153,6 +154,7 @@ const struct iwl_cfg iwl22000_2ac_cfg_hr_cdb = {
.name = "Intel(R) Dual Band Wireless AC 22000",
.fw_name_pre = IWL_22000_HR_CDB_FW_PRE,
IWL_DEVICE_22000,
.csr = &iwl_csr_v1,
.ht_params = &iwl_22000_ht_params,
.nvm_ver = IWL_22000_NVM_VERSION,
.nvm_calib_ver = IWL_22000_TX_POWER_VERSION,
@ -164,6 +166,7 @@ const struct iwl_cfg iwl22000_2ac_cfg_jf = {
.name = "Intel(R) Dual Band Wireless AC 22000",
.fw_name_pre = IWL_22000_JF_FW_PRE,
IWL_DEVICE_22000,
.csr = &iwl_csr_v1,
.ht_params = &iwl_22000_ht_params,
.nvm_ver = IWL_22000_NVM_VERSION,
.nvm_calib_ver = IWL_22000_TX_POWER_VERSION,
@ -174,6 +177,7 @@ const struct iwl_cfg iwl22000_2ax_cfg_hr = {
.name = "Intel(R) Dual Band Wireless AX 22000",
.fw_name_pre = IWL_22000_HR_FW_PRE,
IWL_DEVICE_22000,
.csr = &iwl_csr_v1,
.ht_params = &iwl_22000_ht_params,
.nvm_ver = IWL_22000_NVM_VERSION,
.nvm_calib_ver = IWL_22000_TX_POWER_VERSION,
@ -184,6 +188,7 @@ const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_f0 = {
.name = "Intel(R) Dual Band Wireless AX 22000",
.fw_name_pre = IWL_22000_HR_F0_FW_PRE,
IWL_DEVICE_22000,
.csr = &iwl_csr_v1,
.ht_params = &iwl_22000_ht_params,
.nvm_ver = IWL_22000_NVM_VERSION,
.nvm_calib_ver = IWL_22000_TX_POWER_VERSION,
@ -194,6 +199,7 @@ const struct iwl_cfg iwl22000_2ax_cfg_qnj_jf_b0 = {
.name = "Intel(R) Dual Band Wireless AX 22000",
.fw_name_pre = IWL_22000_JF_B0_FW_PRE,
IWL_DEVICE_22000,
.csr = &iwl_csr_v1,
.ht_params = &iwl_22000_ht_params,
.nvm_ver = IWL_22000_NVM_VERSION,
.nvm_calib_ver = IWL_22000_TX_POWER_VERSION,
@ -204,6 +210,7 @@ const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0 = {
.name = "Intel(R) Dual Band Wireless AX 22000",
.fw_name_pre = IWL_22000_HR_A0_FW_PRE,
IWL_DEVICE_22000,
.csr = &iwl_csr_v1,
.ht_params = &iwl_22000_ht_params,
.nvm_ver = IWL_22000_NVM_VERSION,
.nvm_calib_ver = IWL_22000_TX_POWER_VERSION,

8
drivers/net/wireless/intel/iwlwifi/cfg/5000.c
View File

@ -1,6 +1,7 @@
/******************************************************************************
*
* Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@ -28,7 +29,6 @@
#include <linux/stringify.h>
#include "iwl-config.h"
#include "iwl-agn-hw.h"
#include "iwl-csr.h"
/* Highest firmware API version supported */
#define IWL5000_UCODE_API_MAX 5
@ -89,7 +89,8 @@ static const struct iwl_eeprom_params iwl5000_eeprom_params = {
.base_params = &iwl5000_base_params, \
.eeprom_params = &iwl5000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl5300_agn_cfg = {
.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
@ -153,7 +154,8 @@ const struct iwl_cfg iwl5350_agn_cfg = {
.eeprom_params = &iwl5000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl5150_agn_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",

19
drivers/net/wireless/intel/iwlwifi/cfg/6000.c
View File

@ -1,6 +1,7 @@
/******************************************************************************
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@ -135,7 +136,8 @@ static const struct iwl_eeprom_params iwl6000_eeprom_params = {
.base_params = &iwl6000_g2_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl6005_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
@ -189,7 +191,8 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = {
.base_params = &iwl6000_g2_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl6030_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
@ -225,7 +228,8 @@ const struct iwl_cfg iwl6030_2bg_cfg = {
.base_params = &iwl6000_g2_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl6035_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
@ -280,7 +284,8 @@ const struct iwl_cfg iwl130_bg_cfg = {
.base_params = &iwl6000_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
@ -313,7 +318,8 @@ const struct iwl_cfg iwl6000i_2bg_cfg = {
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
@ -339,7 +345,8 @@ const struct iwl_cfg iwl6050_2abg_cfg = {
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl6150_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",

5
drivers/net/wireless/intel/iwlwifi/cfg/7000.c
View File

@ -8,6 +8,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2015 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -35,6 +36,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2015 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -167,7 +169,8 @@ static const struct iwl_ht_params iwl7000_ht_params = {
.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_7000, \
.non_shared_ant = ANT_A, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \
.dccm_offset = IWL7000_DCCM_OFFSET
.dccm_offset = IWL7000_DCCM_OFFSET, \
.csr = &iwl_csr_v1
#define IWL_DEVICE_7000 \
IWL_DEVICE_7000_COMMON, \

5
drivers/net/wireless/intel/iwlwifi/cfg/8000.c
View File

@ -8,6 +8,7 @@
* Copyright(c) 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -34,6 +35,7 @@
*
* Copyright(c) 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -158,7 +160,8 @@ static const struct iwl_tt_params iwl8000_tt_params = {
.apmg_not_supported = true, \
.nvm_type = IWL_NVM_EXT, \
.dbgc_supported = true, \
.min_umac_error_event_table = 0x800000
.min_umac_error_event_table = 0x800000, \
.csr = &iwl_csr_v1
#define IWL_DEVICE_8000 \
IWL_DEVICE_8000_COMMON, \

3
drivers/net/wireless/intel/iwlwifi/cfg/9000.c
View File

@ -156,7 +156,8 @@ static const struct iwl_tt_params iwl9000_tt_params = {
.rf_id = true, \
.nvm_type = IWL_NVM_EXT, \
.dbgc_supported = true, \
.min_umac_error_event_table = 0x800000
.min_umac_error_event_table = 0x800000, \
.csr = &iwl_csr_v1
const struct iwl_cfg iwl9160_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 9160",

65
drivers/net/wireless/intel/iwlwifi/iwl-config.h
View File

@ -7,6 +7,7 @@
*
* Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
* Copyright (C) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -33,6 +34,7 @@
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright (C) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -69,6 +71,7 @@
#include <linux/netdevice.h>
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include "iwl-csr.h"
enum iwl_device_family {
IWL_DEVICE_FAMILY_UNDEFINED,
@ -284,6 +287,44 @@ struct iwl_pwr_tx_backoff {
u32 backoff;
};
/**
* struct iwl_csr_params
*
* @flag_sw_reset: reset the device
* @flag_mac_clock_ready:
* Indicates MAC (ucode processor, etc.) is powered up and can run.
* Internal resources are accessible.
* NOTE: This does not indicate that the processor is actually running.
* NOTE: This does not indicate that device has completed
* init or post-power-down restore of internal SRAM memory.
* Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
* SRAM is restored and uCode is in normal operation mode.
* This note is relevant only for pre 5xxx devices.
* NOTE: After device reset, this bit remains "0" until host sets
* INIT_DONE
* @flag_init_done: Host sets this to put device into fully operational
* D0 power mode. Host resets this after SW_RESET to put device into
* low power mode.
* @flag_mac_access_req: Host sets this to request and maintain MAC wakeup,
* to allow host access to device-internal resources. Host must wait for
* mac_clock_ready (and !GOING_TO_SLEEP) before accessing non-CSR device
* registers.
* @flag_val_mac_access_en: mac access is enabled
* @flag_master_dis: disable master
* @flag_stop_master: stop master
* @addr_sw_reset: address for resetting the device
*/
struct iwl_csr_params {
u8 flag_sw_reset;
u8 flag_mac_clock_ready;
u8 flag_init_done;
u8 flag_mac_access_req;
u8 flag_val_mac_access_en;
u8 flag_master_dis;
u8 flag_stop_master;
u8 addr_sw_reset;
};
/**
* struct iwl_cfg
* @name: Official name of the device
@ -316,6 +357,7 @@ struct iwl_pwr_tx_backoff {
* @mac_addr_from_csr: read HW address from CSR registers
* @features: hw features, any combination of feature_whitelist
* @pwr_tx_backoffs: translation table between power limits and backoffs
* @csr: csr flags and addresses that are different across devices
* @max_rx_agg_size: max RX aggregation size of the ADDBA request/response
* @max_tx_agg_size: max TX aggregation size of the ADDBA request/response
* @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the
@ -354,6 +396,7 @@ struct iwl_cfg {
const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
const char *default_nvm_file_C_step;
const struct iwl_tt_params *thermal_params;
const struct iwl_csr_params *csr;
enum iwl_device_family device_family;
enum iwl_led_mode led_mode;
enum iwl_nvm_type nvm_type;
@ -400,6 +443,28 @@ struct iwl_cfg {
u32 extra_phy_cfg_flags;
};
static const struct iwl_csr_params iwl_csr_v1 = {
.flag_mac_clock_ready = 0,
.flag_val_mac_access_en = 0,
.flag_init_done = 2,
.flag_mac_access_req = 3,
.flag_sw_reset = 7,
.flag_master_dis = 8,
.flag_stop_master = 9,
.addr_sw_reset = (CSR_BASE + 0x020)
};
static const struct iwl_csr_params iwl_csr_v2 = {
.flag_init_done = 6,
.flag_mac_clock_ready = 20,
.flag_val_mac_access_en = 20,
.flag_mac_access_req = 21,
.flag_master_dis = 28,
.flag_stop_master = 29,
.flag_sw_reset = 31,
.addr_sw_reset = (CSR_BASE + 0x024)
};
/*
* This list declares the config structures for all devices.
*/

28
drivers/net/wireless/intel/iwlwifi/iwl-csr.h
View File

@ -8,6 +8,7 @@
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2016 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -34,6 +35,7 @@
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -257,7 +259,6 @@
/* RESET */
#define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001)
#define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002)
#define CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
#define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
#define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
#define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000)
@ -280,35 +281,10 @@
* 4: GOING_TO_SLEEP
* Indicates MAC is entering a power-saving sleep power-down.
* Not a good time to access device-internal resources.
* 3: MAC_ACCESS_REQ
* Host sets this to request and maintain MAC wakeup, to allow host
* access to device-internal resources. Host must wait for
* MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
* device registers.
* 2: INIT_DONE
* Host sets this to put device into fully operational D0 power mode.
* Host resets this after SW_RESET to put device into low power mode.
* 0: MAC_CLOCK_READY
* Indicates MAC (ucode processor, etc.) is powered up and can run.
* Internal resources are accessible.
* NOTE: This does not indicate that the processor is actually running.
* NOTE: This does not indicate that device has completed
* init or post-power-down restore of internal SRAM memory.
* Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
* SRAM is restored and uCode is in normal operation mode.
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
* do not need to save/restore it.
* NOTE: After device reset, this bit remains "0" until host sets
* INIT_DONE
*/
#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
#define CSR_GP_CNTRL_REG_FLAG_XTAL_ON (0x00000400)
#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000)
#define CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN (0x04000000)
#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000)

8
drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c
View File

@ -6,6 +6,7 @@
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -31,6 +32,7 @@
* BSD LICENSE
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -199,12 +201,12 @@ static int iwl_init_otp_access(struct iwl_trans *trans)
/* Enable 40MHz radio clock */
iwl_write32(trans, CSR_GP_CNTRL,
iwl_read32(trans, CSR_GP_CNTRL) |
CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
BIT(trans->cfg->csr->flag_init_done));
/* wait for clock to be ready */
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
BIT(trans->cfg->csr->flag_mac_clock_ready),
BIT(trans->cfg->csr->flag_mac_clock_ready),
25000);
if (ret < 0) {
IWL_ERR(trans, "Time out access OTP\n");

8
drivers/net/wireless/intel/iwlwifi/mvm/utils.c
View File

@ -8,6 +8,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -35,6 +36,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -520,15 +522,15 @@ static void iwl_mvm_dump_lmac_error_log(struct iwl_mvm *mvm, u32 base)
/* set INIT_DONE flag */
iwl_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
BIT(trans->cfg->csr->flag_init_done));
/* and wait for clock stabilization */
if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
udelay(2);
err = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
BIT(trans->cfg->csr->flag_mac_clock_ready),
BIT(trans->cfg->csr->flag_mac_clock_ready),
25000);
if (err < 0) {
IWL_DEBUG_INFO(trans,

3
drivers/net/wireless/intel/iwlwifi/pcie/rx.c
View File

@ -3,6 +3,7 @@
* Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@ -201,7 +202,7 @@ static void iwl_pcie_rxq_inc_wr_ptr(struct iwl_trans *trans,
IWL_DEBUG_INFO(trans, "Rx queue requesting wakeup, GP1 = 0x%x\n",
reg);
iwl_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
rxq->need_update = true;
return;
}

15
drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
View File

@ -6,6 +6,7 @@
* GPL LICENSE SUMMARY
*
* Copyright(c) 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -19,6 +20,7 @@
* BSD LICENSE
*
* Copyright(c) 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -92,7 +94,8 @@ static int iwl_pcie_gen2_apm_init(struct iwl_trans *trans)
* Set "initialization complete" bit to move adapter from
* D0U* --> D0A* (powered-up active) state.
*/
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
iwl_set_bit(trans, CSR_GP_CNTRL,
BIT(trans->cfg->csr->flag_init_done));
/*
* Wait for clock stabilization; once stabilized, access to
@ -100,8 +103,9 @@ static int iwl_pcie_gen2_apm_init(struct iwl_trans *trans)
* and accesses to uCode SRAM.
*/
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
BIT(trans->cfg->csr->flag_mac_clock_ready),
BIT(trans->cfg->csr->flag_mac_clock_ready),
25000);
if (ret < 0) {
IWL_DEBUG_INFO(trans, "Failed to init the card\n");
return ret;
@ -143,7 +147,8 @@ static void iwl_pcie_gen2_apm_stop(struct iwl_trans *trans, bool op_mode_leave)
* Clear "initialization complete" bit to move adapter from
* D0A* (powered-up Active) --> D0U* (Uninitialized) state.
*/
iwl_clear_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
iwl_clear_bit(trans, CSR_GP_CNTRL,
BIT(trans->cfg->csr->flag_init_done));
}
void _iwl_trans_pcie_gen2_stop_device(struct iwl_trans *trans, bool low_power)
@ -187,7 +192,7 @@ void _iwl_trans_pcie_gen2_stop_device(struct iwl_trans *trans, bool low_power)
/* Make sure (redundant) we've released our request to stay awake */
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
/* Stop the device, and put it in low power state */
iwl_pcie_gen2_apm_stop(trans, false);

65
drivers/net/wireless/intel/iwlwifi/pcie/trans.c
View File

@ -8,6 +8,7 @@
* Copyright(c) 2007 - 2015 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@ -35,6 +36,7 @@
* Copyright(c) 2005 - 2015 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -179,7 +181,8 @@ static void iwl_trans_pcie_dump_regs(struct iwl_trans *trans)
static void iwl_trans_pcie_sw_reset(struct iwl_trans *trans)
{
/* Reset entire device - do controller reset (results in SHRD_HW_RST) */
iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
iwl_set_bit(trans, trans->cfg->csr->addr_sw_reset,
BIT(trans->cfg->csr->flag_sw_reset));
usleep_range(5000, 6000);
}
@ -372,7 +375,8 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans)
* Set "initialization complete" bit to move adapter from
* D0U* --> D0A* (powered-up active) state.
*/
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
iwl_set_bit(trans, CSR_GP_CNTRL,
BIT(trans->cfg->csr->flag_init_done));
/*
* Wait for clock stabilization; once stabilized, access to
@ -380,8 +384,9 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans)
* and accesses to uCode SRAM.
*/
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
BIT(trans->cfg->csr->flag_mac_clock_ready),
BIT(trans->cfg->csr->flag_mac_clock_ready),
25000);
if (ret < 0) {
IWL_ERR(trans, "Failed to init the card\n");
return ret;
@ -459,15 +464,16 @@ static void iwl_pcie_apm_lp_xtal_enable(struct iwl_trans *trans)
* Set "initialization complete" bit to move adapter from
* D0U* --> D0A* (powered-up active) state.
*/
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
iwl_set_bit(trans, CSR_GP_CNTRL,
BIT(trans->cfg->csr->flag_init_done));
/*
* Wait for clock stabilization; once stabilized, access to
* device-internal resources is possible.
*/
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
BIT(trans->cfg->csr->flag_mac_clock_ready),
BIT(trans->cfg->csr->flag_mac_clock_ready),
25000);
if (WARN_ON(ret < 0)) {
IWL_ERR(trans, "Access time out - failed to enable LP XTAL\n");
@ -519,7 +525,7 @@ static void iwl_pcie_apm_lp_xtal_enable(struct iwl_trans *trans)
* D0A* (powered-up Active) --> D0U* (Uninitialized) state.
*/
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
BIT(trans->cfg->csr->flag_init_done));
/* Activates XTAL resources monitor */
__iwl_trans_pcie_set_bit(trans, CSR_MONITOR_CFG_REG,
@ -541,11 +547,12 @@ void iwl_pcie_apm_stop_master(struct iwl_trans *trans)
int ret;
/* stop device's busmaster DMA activity */
iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
iwl_set_bit(trans, trans->cfg->csr->addr_sw_reset,
BIT(trans->cfg->csr->flag_stop_master));
ret = iwl_poll_bit(trans, CSR_RESET,
CSR_RESET_REG_FLAG_MASTER_DISABLED,
CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
ret = iwl_poll_bit(trans, trans->cfg->csr->addr_sw_reset,
BIT(trans->cfg->csr->flag_master_dis),
BIT(trans->cfg->csr->flag_master_dis), 100);
if (ret < 0)
IWL_WARN(trans, "Master Disable Timed Out, 100 usec\n");
@ -594,7 +601,7 @@ static void iwl_pcie_apm_stop(struct iwl_trans *trans, bool op_mode_leave)
* D0A* (powered-up Active) --> D0U* (Uninitialized) state.
*/
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
BIT(trans->cfg->csr->flag_init_done));
}
static int iwl_pcie_nic_init(struct iwl_trans *trans)
@ -1267,7 +1274,7 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
/* Make sure (redundant) we've released our request to stay awake */
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
/* Stop the device, and put it in low power state */
iwl_pcie_apm_stop(trans, false);
@ -1497,9 +1504,9 @@ static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test,
iwl_pcie_synchronize_irqs(trans);
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
BIT(trans->cfg->csr->flag_init_done));
iwl_pcie_enable_rx_wake(trans, false);
@ -1543,15 +1550,17 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
iwl_pcie_reset_ict(trans);
iwl_enable_interrupts(trans);
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
iwl_set_bit(trans, CSR_GP_CNTRL,
BIT(trans->cfg->csr->flag_mac_access_req));
iwl_set_bit(trans, CSR_GP_CNTRL,
BIT(trans->cfg->csr->flag_init_done));
if (trans->cfg->device_family >= IWL_DEVICE_FAMILY_8000)
udelay(2);
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
BIT(trans->cfg->csr->flag_mac_clock_ready),
BIT(trans->cfg->csr->flag_mac_clock_ready),
25000);
if (ret < 0) {
IWL_ERR(trans, "Failed to resume the device (mac ready)\n");
@ -1562,7 +1571,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
if (!reset) {
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
} else {
iwl_trans_pcie_tx_reset(trans);
@ -1939,7 +1948,7 @@ static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans,
/* this bit wakes up the NIC */
__iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
if (trans->cfg->device_family >= IWL_DEVICE_FAMILY_8000)
udelay(2);
@ -1964,8 +1973,8 @@ static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans,
* and do not save/restore SRAM when power cycling.
*/
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN,
(CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY |
BIT(trans->cfg->csr->flag_val_mac_access_en),
(BIT(trans->cfg->csr->flag_mac_clock_ready) |
CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000);
if (unlikely(ret < 0)) {
iwl_trans_pcie_dump_regs(trans);
@ -2003,7 +2012,7 @@ static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans,
goto out;
__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
/*
* Above we read the CSR_GP_CNTRL register, which will flush
* any previous writes, but we need the write that clears the
@ -3232,12 +3241,12 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
* id located at the AUX bus MISC address space.
*/
iwl_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
BIT(trans->cfg->csr->flag_init_done));
udelay(2);
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
BIT(trans->cfg->csr->flag_mac_clock_ready),
BIT(trans->cfg->csr->flag_mac_clock_ready),
25000);
if (ret < 0) {
IWL_DEBUG_INFO(trans, "Failed to wake up the nic\n");

16
drivers/net/wireless/intel/iwlwifi/pcie/tx.c
View File

@ -3,6 +3,7 @@
* Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@ -273,7 +274,7 @@ static void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans,
IWL_DEBUG_INFO(trans, "Tx queue %d requesting wakeup, GP1 = 0x%x\n",
txq_id, reg);
iwl_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
txq->need_update = true;
return;
}
@ -611,7 +612,7 @@ static void iwl_pcie_clear_cmd_in_flight(struct iwl_trans *trans)
trans_pcie->cmd_hold_nic_awake = false;
__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(trans->cfg->csr->flag_mac_access_req));
}
/*
@ -1171,6 +1172,7 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans,
const struct iwl_host_cmd *cmd)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
const struct iwl_cfg *cfg = trans->cfg;
int ret;
lockdep_assert_held(&trans_pcie->reg_lock);
@ -1188,19 +1190,19 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans,
* returned. This needs to be done only on NICs that have
* apmg_wake_up_wa set.
*/
if (trans->cfg->base_params->apmg_wake_up_wa &&
if (cfg->base_params->apmg_wake_up_wa &&
!trans_pcie->cmd_hold_nic_awake) {
__iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(cfg->csr->flag_mac_access_req));
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN,
(CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY |
BIT(cfg->csr->flag_val_mac_access_en),
(BIT(cfg->csr->flag_mac_clock_ready) |
CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP),
15000);
if (ret < 0) {
__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
BIT(cfg->csr->flag_mac_access_req));
IWL_ERR(trans, "Failed to wake NIC for hcmd\n");
return -EIO;
}