mirror of https://gitee.com/openkylin/linux.git
Revert "powerpc/p3060qds: Add support for P3060QDS board"
This reverts commit 96cc017c5b.
The P3060 was cancelled before it went into production, so there's no point
in supporting it.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Timur Tabi
Kumar Gala
parent
6bd825f029
commit
ab2aba4743
|
|
@ -1,302 +0,0 @@
|
|||
/*
|
||||
* P3060 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <16 2 1 11>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
fsl,srio-rmu-handle = <&rmu>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@44000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu4>;
|
||||
reg = <0x44000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@45000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu5>;
|
||||
reg = <0x45000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@46000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu6>;
|
||||
reg = <0x46000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@47000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu7>;
|
||||
reg = <0x47000 0x1000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p3060-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000
|
||||
0x11000 0x1000>;
|
||||
interrupts = <16 2 1 27
|
||||
16 2 1 26>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x5000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-rmu-0.dtsi"
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p3060-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
usb@210000 {
|
||||
compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
|
||||
};
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
usb@211000 {
|
||||
compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
|
||||
};
|
||||
/include/ "qoriq-sec4.1-0.dtsi"
|
||||
};
|
||||
|
|
@ -1,125 +0,0 @@
|
|||
/*
|
||||
* P3060 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P3060";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e500mc@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e500mc@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu4: PowerPC,e500mc@4 {
|
||||
device_type = "cpu";
|
||||
reg = <4>;
|
||||
next-level-cache = <&L2_4>;
|
||||
L2_4: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu5: PowerPC,e500mc@5 {
|
||||
device_type = "cpu";
|
||||
reg = <5>;
|
||||
next-level-cache = <&L2_5>;
|
||||
L2_5: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu6: PowerPC,e500mc@6 {
|
||||
device_type = "cpu";
|
||||
reg = <6>;
|
||||
next-level-cache = <&L2_6>;
|
||||
L2_6: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu7: PowerPC,e500mc@7 {
|
||||
device_type = "cpu";
|
||||
reg = <7>;
|
||||
next-level-cache = <&L2_7>;
|
||||
L2_7: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,242 +0,0 @@
|
|||
/*
|
||||
* P3060QDS Device Tree Source
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/p3060si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,P3060QDS";
|
||||
compatible = "fsl,P3060QDS";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
dcsr: dcsr@f00000000 {
|
||||
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
|
||||
};
|
||||
|
||||
soc: soc@ffe000000 {
|
||||
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
||||
reg = <0xf 0xfe000000 0 0x00001000>;
|
||||
spi@110000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,s25sl12801";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
partition@u-boot {
|
||||
label = "u-boot";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
read-only;
|
||||
};
|
||||
partition@kernel {
|
||||
label = "kernel";
|
||||
reg = <0x00100000 0x00500000>;
|
||||
read-only;
|
||||
};
|
||||
partition@dtb {
|
||||
label = "dtb";
|
||||
reg = <0x00600000 0x00100000>;
|
||||
read-only;
|
||||
};
|
||||
partition@fs {
|
||||
label = "file system";
|
||||
reg = <0x00700000 0x00900000>;
|
||||
};
|
||||
};
|
||||
flash@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,en25q32b";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
partition@spi1 {
|
||||
label = "spi1";
|
||||
reg = <0x00000000 0x00400000>;
|
||||
};
|
||||
};
|
||||
flash@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "atmel,at45db081d";
|
||||
reg = <2>;
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
partition@spi1 {
|
||||
label = "spi2";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
};
|
||||
};
|
||||
flash@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,sst25wf040";
|
||||
reg = <3>;
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
partition@spi3 {
|
||||
label = "spi3";
|
||||
reg = <0x00000000 0x00080000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c@118000 {
|
||||
eeprom@51 {
|
||||
compatible = "at24,24c256";
|
||||
reg = <0x51>;
|
||||
};
|
||||
eeprom@53 {
|
||||
compatible = "at24,24c256";
|
||||
reg = <0x53>;
|
||||
};
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds3232";
|
||||
reg = <0x68>;
|
||||
interrupts = <0x1 0x1 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0: usb@210000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
usb1: usb@211000 {
|
||||
dr_mode = "host";
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
};
|
||||
|
||||
rio: rapidio@ffe0c0000 {
|
||||
reg = <0xf 0xfe0c0000 0 0x11000>;
|
||||
|
||||
port1 {
|
||||
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
|
||||
};
|
||||
port2 {
|
||||
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
lbc: localbus@ffe124000 {
|
||||
reg = <0xf 0xfe124000 0 0x1000>;
|
||||
ranges = <0 0 0xf 0xe8000000 0x08000000
|
||||
2 0 0xf 0xffa00000 0x00040000
|
||||
3 0 0xf 0xffdf0000 0x00008000>;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0 0x08000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <2>;
|
||||
};
|
||||
|
||||
nand@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x2 0x0 0x40000>;
|
||||
|
||||
partition@0 {
|
||||
label = "NAND U-Boot Image";
|
||||
reg = <0x0 0x02000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2000000 {
|
||||
label = "NAND Root File System";
|
||||
reg = <0x02000000 0x10000000>;
|
||||
};
|
||||
|
||||
partition@12000000 {
|
||||
label = "NAND Compressed RFS Image";
|
||||
reg = <0x12000000 0x08000000>;
|
||||
};
|
||||
|
||||
partition@1a000000 {
|
||||
label = "NAND Linux Kernel Image";
|
||||
reg = <0x1a000000 0x04000000>;
|
||||
};
|
||||
|
||||
partition@1e000000 {
|
||||
label = "NAND DTB Image";
|
||||
reg = <0x1e000000 0x01000000>;
|
||||
};
|
||||
|
||||
partition@1f000000 {
|
||||
label = "NAND Writable User area";
|
||||
reg = <0x1f000000 0x21000000>;
|
||||
};
|
||||
};
|
||||
|
||||
board-control@3,0 {
|
||||
compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
|
||||
reg = <3 0 0x100>;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe200000 {
|
||||
reg = <0xf 0xfe200000 0 0x1000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
|
||||
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe201000 {
|
||||
reg = <0xf 0xfe201000 0 0x1000>;
|
||||
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
|
||||
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p3060si-post.dtsi"
|
||||
|
|
@ -23,7 +23,6 @@ CONFIG_MODVERSIONS=y
|
|||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_P2041_RDB=y
|
||||
CONFIG_P3041_DS=y
|
||||
CONFIG_P3060_QDS=y
|
||||
CONFIG_P4080_DS=y
|
||||
CONFIG_P5020_DS=y
|
||||
CONFIG_HIGHMEM=y
|
||||
|
|
|
|||
|
|
@ -216,18 +216,6 @@ config P3041_DS
|
|||
help
|
||||
This option enables support for the P3041 DS board
|
||||
|
||||
config P3060_QDS
|
||||
bool "Freescale P3060 QDS"
|
||||
select DEFAULT_UIMAGE
|
||||
select PPC_E500MC
|
||||
select PHYS_64BIT
|
||||
select SWIOTLB
|
||||
select GPIO_MPC8XXX
|
||||
select HAS_RAPIDIO
|
||||
select PPC_EPAPR_HV_PIC
|
||||
help
|
||||
This option enables support for the P3060 QDS board
|
||||
|
||||
config P4080_DS
|
||||
bool "Freescale P4080 DS"
|
||||
select DEFAULT_UIMAGE
|
||||
|
|
|
|||
|
|
@ -17,7 +17,6 @@ obj-$(CONFIG_P1022_DS) += p1022_ds.o
|
|||
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
|
||||
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
|
||||
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
|
||||
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
|
|
|
|||
|
|
@ -1,77 +0,0 @@
|
|||
/*
|
||||
* P3060 QDS Setup
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/phy.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include <asm/ehv_pic.h>
|
||||
#include "corenet_ds.h"
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init p3060_qds_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
#ifdef CONFIG_SMP
|
||||
extern struct smp_ops_t smp_85xx_ops;
|
||||
#endif
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
|
||||
return 1;
|
||||
|
||||
/* Check if we're running under the Freescale hypervisor */
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
|
||||
ppc_md.init_IRQ = ehv_pic_init;
|
||||
ppc_md.get_irq = ehv_pic_get_irq;
|
||||
ppc_md.restart = fsl_hv_restart;
|
||||
ppc_md.power_off = fsl_hv_halt;
|
||||
ppc_md.halt = fsl_hv_halt;
|
||||
#ifdef CONFIG_SMP
|
||||
/*
|
||||
* Disable the timebase sync operations because we can't write
|
||||
* to the timebase registers under the hypervisor.
|
||||
*/
|
||||
smp_85xx_ops.give_timebase = NULL;
|
||||
smp_85xx_ops.take_timebase = NULL;
|
||||
#endif
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(p3060_qds) {
|
||||
.name = "P3060 QDS",
|
||||
.probe = p3060_qds_probe,
|
||||
.setup_arch = corenet_ds_setup_arch,
|
||||
.init_IRQ = corenet_ds_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
.get_irq = mpic_get_coreint_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
.power_save = e500_idle,
|
||||
};
|
||||
|
||||
machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
|
||||
#endif
|
||||
Loading…
Reference in New Issue