mirror of https://gitee.com/openkylin/linux.git
powerpc/85xx: Rework P1022DS device tree
Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Reworked PCIe nodes to allow supportin IRQs for controller (errors) and moved PCI device IRQs down to virtual bridge level * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the 'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum * Updated spi node to new espi binding specification * Renamed SDHC node from 'sdhci' to 'sdhc' * Added usb node for 2nd usb controller * Dropping "fsl,p1022-IP..." from compatibles for standard blocks * Fixed bug in local bus range node for CS2, was maping to 0x0 0x0xffa00000 instead of 0xf 0xffa00000 * Fixed localbus reg property should have been 0xf 0xffe05000 Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Tested-by: Timur Tabi <timur@freescale.com>
This commit is contained in:
Kumar Gala
parent
ffeb33d20c
commit
ab827d97bd
|
|
@ -0,0 +1,235 @@
|
|||
/*
|
||||
* P1022/P1013 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xb000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1022-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1022-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1022-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-1.dtsi"
|
||||
dma@c300 {
|
||||
dma00: dma-channel@0 {
|
||||
compatible = "fsl,ssi-dma-channel";
|
||||
};
|
||||
dma01: dma-channel@80 {
|
||||
compatible = "fsl,ssi-dma-channel";
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
display@10000 {
|
||||
compatible = "fsl,diu", "fsl,p1022-diu";
|
||||
reg = <0x10000 1000>;
|
||||
interrupts = <64 2 0 0>;
|
||||
};
|
||||
|
||||
ssi@15000 {
|
||||
compatible = "fsl,mpc8610-ssi";
|
||||
cell-index = <0>;
|
||||
reg = <0x15000 0x100>;
|
||||
interrupts = <75 2 0 0>;
|
||||
fsl,playback-dma = <&dma00>;
|
||||
fsl,capture-dma = <&dma01>;
|
||||
fsl,fifo-depth = <15>;
|
||||
};
|
||||
|
||||
/include/ "pq3-sata2-0.dtsi"
|
||||
/include/ "pq3-sata2-1.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1022-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-1.dtsi"
|
||||
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
sdhc@2e000 {
|
||||
fsl,sdhci-auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "pq3-sec3.3-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
/include/ "pq3-etsec2-0.dtsi"
|
||||
enet0: enet0_grp2: ethernet@b0000 {
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-1.dtsi"
|
||||
enet1: enet1_grp2: ethernet@b1000 {
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p1022-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
|
||||
power@e0070{
|
||||
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
|
||||
reg = <0xe0070 0x20>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-grp2-0.dtsi"
|
||||
/include/ "pq3-etsec2-grp2-1.dtsi"
|
||||
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* P1022/P1013 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P1022";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1022@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P1022@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -8,55 +8,20 @@
|
|||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "fsl/p1022si-pre.dtsi"
|
||||
/ {
|
||||
model = "fsl,P1022";
|
||||
model = "fsl,P1022DS";
|
||||
compatible = "fsl,P1022DS";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1022@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P1022@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@fffe05000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
interrupts = <19 2 0 0>;
|
||||
|
||||
lbc: localbus@fffe05000 {
|
||||
reg = <0xf 0xffe05000 0 0x1000>;
|
||||
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
|
||||
0x1 0x0 0xf 0xe0000000 0x08000000
|
||||
0x2 0x0 0x0 0xffa00000 0x00040000
|
||||
0x2 0x0 0xf 0xffa00000 0x00040000
|
||||
0x3 0x0 0xf 0xffdf0000 0x00008000>;
|
||||
|
||||
nor@0,0 {
|
||||
|
|
@ -161,51 +126,10 @@ board-control@3,0 {
|
|||
};
|
||||
};
|
||||
|
||||
soc@fffe00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1022-immr", "simple-bus";
|
||||
soc: soc@fffe00000 {
|
||||
ranges = <0x0 0xf 0xffe00000 0x100000>;
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1022-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1022-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
|
||||
wm8776:codec@1a {
|
||||
compatible = "wlf,wm8776";
|
||||
reg = <0x1a>;
|
||||
|
|
@ -216,41 +140,14 @@ wm8776:codec@1a {
|
|||
};
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
cell-index = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,espi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <59 0x2 0 0>;
|
||||
espi,num-ss-bits = <4>;
|
||||
mode = "cpu";
|
||||
|
||||
fsl_m25p80@0 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,espi-flash";
|
||||
compatible = "spansion,s25sl12801";
|
||||
reg = <0>;
|
||||
linux,modalias = "fsl_m25p80";
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot-spi";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
|
|
@ -274,115 +171,20 @@ partition@700000 {
|
|||
};
|
||||
|
||||
ssi@15000 {
|
||||
compatible = "fsl,mpc8610-ssi";
|
||||
cell-index = <0>;
|
||||
reg = <0x15000 0x100>;
|
||||
interrupts = <75 2 0 0>;
|
||||
fsl,mode = "i2s-slave";
|
||||
codec-handle = <&wm8776>;
|
||||
fsl,playback-dma = <&dma00>;
|
||||
fsl,capture-dma = <&dma01>;
|
||||
fsl,fifo-depth = <15>;
|
||||
fsl,ssi-asynchronous;
|
||||
};
|
||||
|
||||
dma@c300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0xc300 0x4>;
|
||||
ranges = <0x0 0xc100 0x200>;
|
||||
cell-index = <1>;
|
||||
dma00: dma-channel@0 {
|
||||
compatible = "fsl,ssi-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <76 2 0 0>;
|
||||
};
|
||||
dma01: dma-channel@80 {
|
||||
compatible = "fsl,ssi-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <77 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <78 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <79 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8572-gpio";
|
||||
reg = <0xf000 0x100>;
|
||||
interrupts = <47 0x2 0 0>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1022-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2, 256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0x21300 0x4>;
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <20 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <21 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <22 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <23 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x22000 0x1000>;
|
||||
interrupts = <28 0x2 0 0>;
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-mdio";
|
||||
reg = <0x24000 0x1000 0xb0030 0x4>;
|
||||
usb@23000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
|
|
@ -393,187 +195,22 @@ phy1: ethernet-phy@1 {
|
|||
};
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-mdio";
|
||||
reg = <0x25000 0x1000 0xb1030 0x4>;
|
||||
};
|
||||
|
||||
enet0: ethernet@B0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
fsl,magic-packet;
|
||||
fsl,wake-on-filer;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
ethernet@b0000 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
queue-group@0{
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xB0000 0x1000>;
|
||||
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
|
||||
};
|
||||
queue-group@1{
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xB4000 0x1000>;
|
||||
interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
enet1: ethernet@B1000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
ethernet@b1000 {
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
queue-group@0{
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xB1000 0x1000>;
|
||||
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
|
||||
};
|
||||
queue-group@1{
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xB5000 0x1000>;
|
||||
interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
compatible = "fsl,p1022-esdhc", "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <72 0x2 0 0>;
|
||||
fsl,sdhci-auto-cmd12;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
|
||||
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
|
||||
"fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 0 0 58 2 0 0>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0x97c>;
|
||||
fsl,descriptor-types-mask = <0x3a30abf>;
|
||||
};
|
||||
|
||||
sata@18000 {
|
||||
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
|
||||
reg = <0x18000 0x1000>;
|
||||
cell-index = <1>;
|
||||
interrupts = <74 0x2 0 0>;
|
||||
};
|
||||
|
||||
sata@19000 {
|
||||
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
|
||||
reg = <0x19000 0x1000>;
|
||||
cell-index = <2>;
|
||||
interrupts = <41 0x2 0 0>;
|
||||
};
|
||||
|
||||
power@e0070{
|
||||
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
|
||||
reg = <0xe0070 0x20>;
|
||||
};
|
||||
|
||||
display@10000 {
|
||||
compatible = "fsl,diu", "fsl,p1022-diu";
|
||||
reg = <0x10000 1000>;
|
||||
interrupts = <64 2 0 0>;
|
||||
};
|
||||
|
||||
timer@41100 {
|
||||
compatible = "fsl,mpic-global-timer";
|
||||
reg = <0x41100 0x100 0x41300 4>;
|
||||
interrupts = <0 0 3 0
|
||||
1 0 3 0
|
||||
2 0 3 0
|
||||
3 0 3 0>;
|
||||
};
|
||||
|
||||
timer@42100 {
|
||||
compatible = "fsl,mpic-global-timer";
|
||||
reg = <0x42100 0x100 0x42300 4>;
|
||||
interrupts = <4 0 3 0
|
||||
5 0 3 0
|
||||
6 0 3 0
|
||||
7 0 3 0>;
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <4>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "fsl,mpic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,p1022-msi", "fsl,mpic-msi";
|
||||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0 0 0
|
||||
0xe1 0 0 0
|
||||
0xe2 0 0 0
|
||||
0xe3 0 0 0
|
||||
0xe4 0 0 0
|
||||
0xe5 0 0 0
|
||||
0xe6 0 0 0
|
||||
0xe7 0 0 0>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
compatible = "fsl,p1022-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@fffe09000 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0xf 0xffe09000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 4 1
|
||||
0000 0 0 2 &mpic 5 1
|
||||
0000 0 0 3 &mpic 6 1
|
||||
0000 0 0 4 &mpic 7 1
|
||||
>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
|
@ -585,30 +222,11 @@ pcie@0 {
|
|||
};
|
||||
|
||||
pci1: pcie@fffe0a000 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0xf 0xffe0a000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 0 1
|
||||
0000 0 0 2 &mpic 1 1
|
||||
0000 0 0 3 &mpic 2 1
|
||||
0000 0 0 4 &mpic 3 1
|
||||
>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
|
@ -619,32 +237,11 @@ pcie@0 {
|
|||
};
|
||||
};
|
||||
|
||||
|
||||
pci2: pcie@fffe0b000 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0xf 0xffe0b000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 8 1
|
||||
0000 0 0 2 &mpic 9 1
|
||||
0000 0 0 3 &mpic 10 1
|
||||
0000 0 0 4 &mpic 11 1
|
||||
>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
|
@ -655,3 +252,5 @@ pcie@0 {
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p1022si-post.dtsi"
|
||||
|
|
|
|||
Loading…
Reference in New Issue