From ac06fba1de8fb2685bf6e185ce211def3bf6d16e Mon Sep 17 00:00:00 2001 From: Vijay Viswanath Date: Fri, 20 Apr 2018 17:45:28 +0530 Subject: [PATCH] mmc: sdhci-msm: Add support to store supported vdd-io voltages During probe check whether the vdd-io regulator of sdhc platform device can support 1.8V and 3V and store this information as a capability of platform device. Signed-off-by: Vijay Viswanath Reviewed-by: Douglas Anderson Acked-by: Bjorn Andersson Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-msm.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index c283291db705..edd30a23d36b 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "sdhci-pltfm.h" @@ -81,6 +82,9 @@ #define CORE_HC_SELECT_IN_HS400 (6 << 19) #define CORE_HC_SELECT_IN_MASK (7 << 19) +#define CORE_3_0V_SUPPORT (1 << 25) +#define CORE_1_8V_SUPPORT (1 << 26) + #define CORE_CSR_CDC_CTLR_CFG0 0x130 #define CORE_SW_TRIG_FULL_CALIB BIT(16) #define CORE_HW_AUTOCAL_ENA BIT(17) @@ -148,6 +152,7 @@ struct sdhci_msm_host { u32 curr_io_level; wait_queue_head_t pwr_irq_wait; bool pwr_irq_flag; + u32 caps_0; }; static unsigned int msm_get_clock_rate_for_bus_mode(struct sdhci_host *host, @@ -1103,7 +1108,7 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); u32 irq_status, irq_ack = 0; int retry = 10; - int pwr_state = 0, io_level = 0; + u32 pwr_state = 0, io_level = 0; irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS); @@ -1313,6 +1318,27 @@ static void sdhci_msm_writeb(struct sdhci_host *host, u8 val, int reg) sdhci_msm_check_power_status(host, req_type); } +static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host) +{ + struct mmc_host *mmc = msm_host->mmc; + struct regulator *supply = mmc->supply.vqmmc; + u32 caps = 0; + + if (!IS_ERR(mmc->supply.vqmmc)) { + if (regulator_is_supported_voltage(supply, 1700000, 1950000)) + caps |= CORE_1_8V_SUPPORT; + if (regulator_is_supported_voltage(supply, 2700000, 3600000)) + caps |= CORE_3_0V_SUPPORT; + + if (!caps) + pr_warn("%s: 1.8/3V not supported for vqmmc\n", + mmc_hostname(mmc)); + } + + msm_host->caps_0 |= caps; + pr_debug("%s: supported caps: 0x%08x\n", mmc_hostname(mmc), caps); +} + static const struct of_device_id sdhci_msm_dt_match[] = { { .compatible = "qcom,sdhci-msm-v4" }, {}, @@ -1530,6 +1556,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) ret = sdhci_add_host(host); if (ret) goto pm_runtime_disable; + sdhci_msm_set_regulator_caps(msm_host); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev);