openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

ASoC: Fixes for v4.5 

This is far too big a set of fixes for this late in the release cycle
 but the overwhelming bulk is essentially the same simple fix from
 Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
 interface where drivers were accessing things using the wrong element in
 a union which worked OK on 32 bit platforms as the correct element
 happened to be aligned the same way but with 64 bit platforms ABIs are
 different and the two members of the union are laid out in different
 places.  They aren't all tagged to stable since some of these chips have
 vanishingly little chance of being used in 64 bit systems.
 
 The other changes are:
  - A fix for Qualcomm devices to work on big endian systems.  The
    original change is actually correct but triggered a bug in regmap
    which is too invasive to fix for this cycle and can be worked around
    by just letting regmap pick the default.
  - A fix for the Samsung I2S driver locking which wasn't using IRQ safe
    spinlocks when it needed to.
  - A fix for the new Intel Sky Lake driver forgetting that C pointer
    arithmetic takes the type of the pointer into consideration.
  - A revert of a change to the FSL SSI driver that broke some systems.
  - A fix for the cleanup path of the wm9713 driver.
  - A fix for some incorrect register definitions in the ADAU17x1 driver
    that caused misclocking in some configurations.
  - A fix for the tracepoints for jack detection to avoid using an
    internal field of the core jack structure which is no longer present
    in all configurations.
  - A fix for another of the new Intel drivers which tried to write to a
    string literal.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW3OpsAAoJECTWi3JdVIfQ/lMH/05/atIZLFI3tfxpp9P1zCD2
 6BH6aUtGEz8uh7wpfLlgUKvBhFZxZmr2aYHiuD2c2UQYWJ5L14GavkUvrohQ1oBp
 6LGN2pJ/0uhQ6XnFHcYnJt5C3pdQspNxaNZBCTdLQZDjjki13Q8jXVL2vToFFbpK
 vFEHLqeuwtSLgtgNJMHHLR6o5QpfX7lcMGKwsfNI8k5b+2j5UDh+fwGQcnU9wueU
 FyxIy9FNlHd1nWwQDNyGL06pMKazsPV6KaPDXa/rG6RsOBxpjz+5JgCVKmAh7EUp
 /qUS2Xy0DVTkedtunnA9EIIHyfC1zuFjeH6lU2UyP/A2kcMlzpNyt7uMRK0dolg=
 =+Y7p
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.5

This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places.  They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.

The other changes are:
 - A fix for Qualcomm devices to work on big endian systems.  The
   original change is actually correct but triggered a bug in regmap
   which is too invasive to fix for this cycle and can be worked around
   by just letting regmap pick the default.
 - A fix for the Samsung I2S driver locking which wasn't using IRQ safe
   spinlocks when it needed to.
 - A fix for the new Intel Sky Lake driver forgetting that C pointer
   arithmetic takes the type of the pointer into consideration.
 - A revert of a change to the FSL SSI driver that broke some systems.
 - A fix for the cleanup path of the wm9713 driver.
 - A fix for some incorrect register definitions in the ADAU17x1 driver
   that caused misclocking in some configurations.
 - A fix for the tracepoints for jack detection to avoid using an
   internal field of the core jack structure which is no longer present
   in all configurations.
 - A fix for another of the new Intel drivers which tried to write to a
   string literal.
This commit is contained in:
Takashi Iwai 2016-03-07 11:06:46 +01:00
parent 790b415c98 02db17ff37
commit ad09ef2cce
789 changed files with 9969 additions and 5889 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/cgroup-v2.txt
View File

@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and
conventions of cgroup v2. It describes all userland-visible aspects
of cgroup including core and specific controller behaviors. All
future changes must be reflected in this document. Documentation for
v1 is available under Documentation/cgroup-legacy/.
v1 is available under Documentation/cgroup-v1/.
CONTENTS

2
Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
View File

@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
clock-output-names:
- "xin24m" - crystal input - required,
- "ext_i2s" - external I2S clock - optional,
- "ext_gmac" - external GMAC clock - optional
- "rmii_clkin" - external EMAC clock - optional
Example: Clock controller node:

5
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
View File

@ -24,9 +24,8 @@ Main node required properties:
1 = edge triggered
4 = level triggered
Cells 4 and beyond are reserved for future use. When the 1st cell
has a value of 0 or 1, cells 4 and beyond act as padding, and may be
ignored. It is recommended that padding cells have a value of 0.
Cells 4 and beyond are reserved for future use and must have a value
of 0 if present.
- reg : Specifies base physical address(s) and size of the GIC
registers, in the following order:

4
Documentation/devicetree/bindings/net/renesas,ravb.txt
View File

@ -82,8 +82,8 @@ Example:
"ch16", "ch17", "ch18", "ch19",
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
power-domains = <&cpg_clocks>;
clocks = <&cpg CPG_MOD 812>;
power-domains = <&cpg>;
phy-mode = "rgmii-id";
phy-handle = <&phy0>;

1
Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
View File

@ -8,6 +8,7 @@ OHCI and EHCI controllers.
Required properties:
- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
"renesas,pci-r8a7791" for the R8A7791 SoC;
"renesas,pci-r8a7793" for the R8A7793 SoC;
"renesas,pci-r8a7794" for the R8A7794 SoC;
"renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device

1
Documentation/devicetree/bindings/pci/rcar-pci.txt
View File

@ -4,6 +4,7 @@ Required properties:
compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
"renesas,pcie-r8a7793" for the R8A7793 SoC;
"renesas,pcie-r8a7795" for the R8A7795 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.

10
Documentation/devicetree/bindings/regulator/tps65217.txt
View File

@ -26,11 +26,7 @@ Example:
ti,pmic-shutdown-controller;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: dcdc1 {
reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@ -38,7 +34,6 @@ Example:
};
dcdc2_reg: dcdc2 {
reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -46,7 +41,6 @@ Example:
};
dcdc3_reg: dcc3 {
reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
@ -54,7 +48,6 @@ Example:
};
ldo1_reg: ldo1 {
reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -62,7 +55,6 @@ Example:
};
ldo2_reg: ldo2 {
reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -70,7 +62,6 @@ Example:
};
ldo3_reg: ldo3 {
reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -78,7 +69,6 @@ Example:
};
ldo4_reg: ldo4 {
reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;

6
Documentation/devicetree/bindings/rtc/s3c-rtc.txt
View File

@ -14,6 +14,10 @@ Required properties:
interrupt number is the rtc alarm interrupt and second interrupt number
is the rtc tick interrupt. The number of cells representing a interrupt
depends on the parent interrupt controller.
- clocks: Must contain a list of phandle and clock specifier for the rtc
and source clocks.
- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
same order as the clocks property.
Example:
@ -21,4 +25,6 @@ Example:
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <44 0 45 0>;
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};

2
Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
View File

@ -9,7 +9,7 @@ Optional properties:
- fsl,uart-has-rtscts : Indicate the uart has rts and cts
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
is DCE mode by default.
in DCE mode by default.
Note: Each uart controller should have an alias correctly numbered
in "aliases" node.

37
Documentation/devicetree/bindings/thermal/rcar-thermal.txt
View File

@ -1,8 +1,9 @@
* Renesas R-Car Thermal
Required properties:
- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal"
as fallback.
- compatible : "renesas,thermal-<soctype>",
"renesas,rcar-gen2-thermal" (with thermal-zone) or
"renesas,rcar-thermal" (without thermal-zone) as fallback.
Examples with soctypes are:
- "renesas,thermal-r8a73a4" (R-Mobile APE6)
- "renesas,thermal-r8a7779" (R-Car H1)
@ -36,3 +37,35 @@ thermal@e61f0000 {
0xe61f0300 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
Example (with thermal-zone):
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
};
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7790",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
#thermal-sensor-cells = <0>;
};

7
Documentation/filesystems/efivarfs.txt
View File

@ -14,3 +14,10 @@ filesystem.
efivarfs is typically mounted like this,
mount -t efivarfs none /sys/firmware/efi/efivars
Due to the presence of numerous firmware bugs where removing non-standard
UEFI variables causes the system firmware to fail to POST, efivarfs
files that are not well-known standardized variables are created
as immutable files. This doesn't prevent removal - "chattr -i" will work -
but it does prevent this kind of failure from being accomplished
accidentally.

11
Documentation/kernel-parameters.txt
View File

@ -4235,6 +4235,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
The default value of this parameter is determined by
the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
workqueue.debug_force_rr_cpu
Workqueue used to implicitly guarantee that work
items queued without explicit CPU specified are put
on the local CPU. This guarantee is no longer true
and while local CPU is still preferred work items
may be put on foreign CPUs. This debug option
forces round-robin CPU selection to flush out
usages which depend on the now broken guarantee.
When enabled, memory and cache locality will be
impacted.
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
supporting x2apic.

4
Documentation/timers/hpet.txt
View File

@ -1,9 +1,7 @@
High Precision Event Timer Driver for Linux
The High Precision Event Timer (HPET) hardware follows a specification
by Intel and Microsoft which can be found at
http://www.intel.com/hardwaredesign/hpetspec_1.pdf
by Intel and Microsoft, revision 1.
Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
and up to 32 comparators. Normally three or more comparators are provided,

54
MAINTAINERS
View File

@ -920,17 +920,24 @@ M: Emilio López <emilio@elopez.com.ar>
S: Maintained
F: drivers/clk/sunxi/
ARM/Amlogic MesonX SoC support
ARM/Amlogic Meson SoC support
M: Carlo Caione <carlo@caione.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-meson@googlegroups.com
W: http://linux-meson.com/
S: Maintained
F: drivers/media/rc/meson-ir.c
N: meson[x68]
F: arch/arm/mach-meson/
F: arch/arm/boot/dts/meson*
N: meson
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
S: Maintained
F: arch/arm/mach-alpine/
F: arch/arm/boot/dts/alpine*
F: arch/arm64/boot/dts/al/
F: drivers/*/*alpine*
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
@ -1442,8 +1449,8 @@ S: Maintained
ARM/RENESAS ARM64 ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-sh@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-sh/list/
L: linux-renesas-soc@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm64/boot/dts/renesas/
@ -2362,14 +2369,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
BROADCOM BCM33XX MIPS ARCHITECTURE
M: Kevin Cernekee <cernekee@gmail.com>
L: linux-mips@linux-mips.org
S: Maintained
F: arch/mips/bcm3384/*
F: arch/mips/include/asm/mach-bcm3384/*
F: arch/mips/kernel/*bmips*
BROADCOM BCM47XX MIPS ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
@ -3452,7 +3451,6 @@ F: drivers/usb/dwc2/
DESIGNWARE USB3 DRD IP DRIVER
M: Felipe Balbi <balbi@kernel.org>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/dwc3/
@ -6136,7 +6134,7 @@ F: include/uapi/linux/sunrpc/
KERNEL SELFTEST FRAMEWORK
M: Shuah Khan <shuahkh@osg.samsung.com>
L: linux-api@vger.kernel.org
L: linux-kselftest@vger.kernel.org
T: git git://git.kernel.org/pub/scm/shuah/linux-kselftest
S: Maintained
F: tools/testing/selftests
@ -7362,7 +7360,7 @@ F: drivers/tty/isicom.c
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Felipe Balbi <balbi@kernel.org>
M: Bin Liu <b-liu@ti.com>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
@ -7694,13 +7692,13 @@ S: Maintained
F: arch/nios2/
NOKIA N900 POWER SUPPLY DRIVERS
M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
R: Pali Rohár <pali.rohar@gmail.com>
F: include/linux/power/bq2415x_charger.h
F: include/linux/power/bq27xxx_battery.h
F: include/linux/power/isp1704_charger.h
F: drivers/power/bq2415x_charger.c
F: drivers/power/bq27xxx_battery.c
F: drivers/power/bq27xxx_battery_i2c.c
F: drivers/power/isp1704_charger.c
F: drivers/power/rx51_battery.c
@ -7931,11 +7929,9 @@ F: drivers/media/platform/omap3isp/
F: drivers/staging/media/omap4iss/
OMAP USB SUPPORT
M: Felipe Balbi <balbi@kernel.org>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
S: Orphan
F: drivers/usb/*/*omap*
F: arch/arm/*omap*/usb*
@ -9566,6 +9562,12 @@ M: Andreas Noever <andreas.noever@gmail.com>
S: Maintained
F: drivers/thunderbolt/
TI BQ27XXX POWER SUPPLY DRIVER
R: Andrew F. Davis <afd@ti.com>
F: include/linux/power/bq27xxx_battery.h
F: drivers/power/bq27xxx_battery.c
F: drivers/power/bq27xxx_battery_i2c.c
TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
M: John Stultz <john.stultz@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
@ -9787,10 +9789,11 @@ S: Supported
F: drivers/scsi/be2iscsi/
Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
M: Sathya Perla <sathya.perla@avagotech.com>
M: Ajit Khaparde <ajit.khaparde@avagotech.com>
M: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
M: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
M: Sathya Perla <sathya.perla@broadcom.com>
M: Ajit Khaparde <ajit.khaparde@broadcom.com>
M: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
M: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
M: Somnath Kotur <somnath.kotur@broadcom.com>
L: netdev@vger.kernel.org
W: http://www.emulex.com
S: Supported
@ -12020,7 +12023,6 @@ F: arch/arm64/xen/
F: arch/arm64/include/asm/xen/
XEN NETWORK BACKEND DRIVER
M: Ian Campbell <ian.campbell@citrix.com>
M: Wei Liu <wei.liu2@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: netdev@vger.kernel.org

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 5
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc6
NAME = Blurry Fish Butt
# *DOCUMENTATION*

39
arch/arc/Kconfig
View File

@ -12,8 +12,6 @@ config ARC
select BUILDTIME_EXTABLE_SORT
select COMMON_CLK
select CLONE_BACKWARDS
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
select DEVTMPFS if !INITRAMFS_SOURCE=""
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
@ -275,14 +273,6 @@ config ARC_DCCM_BASE
default "0xA0000000"
depends on ARC_HAS_DCCM
config ARC_HAS_HW_MPY
bool "Use Hardware Multiplier (Normal or Faster XMAC)"
default y
help
Influences how gcc generates code for MPY operations.
If enabled, MPYxx insns are generated, provided by Standard/XMAC
Multipler. Otherwise software multipy lib is used
choice
prompt "MMU Version"
default ARC_MMU_V3 if ARC_CPU_770
@ -338,6 +328,19 @@ config ARC_PAGE_SIZE_4K
endchoice
choice
prompt "MMU Super Page Size"
depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
default ARC_HUGEPAGE_2M
config ARC_HUGEPAGE_2M
bool "2MB"
config ARC_HUGEPAGE_16M
bool "16MB"
endchoice
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
@ -410,7 +413,7 @@ config ARC_HAS_RTC
default n
depends on !SMP
config ARC_HAS_GRTC
config ARC_HAS_GFRC
bool "SMP synchronized 64-bit cycle counter"
default y
depends on SMP
@ -529,14 +532,6 @@ config ARC_DBG_TLB_MISS_COUNT
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
if SMP
config ARC_IPI_DBG
bool "Debug Inter Core interrupts"
default n
endif
endif
config ARC_UBOOT_SUPPORT
@ -566,6 +561,12 @@ endmenu
endmenu # "ARC Architecture Configuration"
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "12" if ARC_HUGEPAGE_16M
default "11"
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"

4
arch/arc/Makefile
View File

@ -74,10 +74,6 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
ldflags-$(upto_gcc44) += -marclinux
ifndef CONFIG_ARC_HAS_HW_MPY
cflags-y += -mno-mpy
endif
LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
# Modules with short calls might break for calls into builtin-kernel

4
arch/arc/configs/axs101_defconfig
View File

@ -39,6 +39,7 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -73,7 +74,6 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
@ -91,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y

10
arch/arc/configs/axs103_defconfig
View File

@ -39,14 +39,10 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
@ -78,14 +74,12 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
@ -97,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y

10
arch/arc/configs/axs103_smp_defconfig
View File

@ -40,14 +40,10 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
@ -79,14 +75,12 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
@ -98,12 +92,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y

5
arch/arc/configs/nsim_700_defconfig
View File

@ -4,6 +4,7 @@ CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@ -26,7 +27,6 @@ CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -34,6 +34,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -51,7 +52,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
@ -63,4 +63,3 @@ CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_XZ_DEC=y

3
arch/arc/configs/nsim_hs_defconfig
View File

@ -35,6 +35,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -49,7 +50,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
@ -61,4 +61,3 @@ CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_XZ_DEC=y

6
arch/arc/configs/nsim_hs_smp_defconfig
View File

@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@ -21,13 +22,11 @@ CONFIG_MODULES=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BOARD_ML509=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -35,6 +34,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -49,7 +49,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
@ -60,4 +59,3 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_XZ_DEC=y

2
arch/arc/configs/nsimosci_defconfig
View File

@ -33,6 +33,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -58,7 +59,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set

3
arch/arc/configs/nsimosci_hs_defconfig
View File

@ -34,12 +34,12 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
CONFIG_NET_OSCI_LAN=y
CONFIG_INPUT_EVDEV=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
@ -58,7 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set

12
arch/arc/configs/nsimosci_hs_smp_defconfig
View File

@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@ -18,15 +19,11 @@ CONFIG_MODULES=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BOARD_ML509=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_HAS_LL64=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
@ -40,6 +37,7 @@ CONFIG_INET=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -56,14 +54,11 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_OSCI_LAN=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
@ -75,9 +70,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_ARCPGU_RGB888=y
CONFIG_ARCPGU_DISPTYPE=0
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set

18
arch/arc/configs/tb10x_defconfig
View File

@ -3,6 +3,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="tb10x"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
@ -26,12 +27,10 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLOCK is not set
CONFIG_ARC_PLAT_TB10X=y
CONFIG_ARC_CACHE_LINE_SHIFT=5
CONFIG_ARC_STACK_NONEXEC=y
CONFIG_HZ=250
CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -44,8 +43,8 @@ CONFIG_IP_MULTICAST=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@ -55,9 +54,6 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
CONFIG_STMMAC_CHAINED=y
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
@ -91,7 +87,6 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
@ -100,17 +95,16 @@ CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

2
arch/arc/configs/vdk_hs38_smp_defconfig
View File

@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
# CONFIG_ARC_HAS_GRTC is not set
# CONFIG_ARC_HAS_GFRC is not set
CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
CONFIG_PREEMPT=y

35
arch/arc/include/asm/arcregs.h
View File

@ -10,7 +10,8 @@
#define _ASM_ARC_ARCREGS_H
/* Build Configuration Registers */
#define ARC_REG_DCCMBASE_BCR 0x61 /* DCCM Base Addr */
#define ARC_REG_AUX_DCCM 0x18 /* DCCM Base Addr ARCv2 */
#define ARC_REG_DCCM_BASE_BUILD 0x61 /* DCCM Base Addr ARCompact */
#define ARC_REG_CRC_BCR 0x62
#define ARC_REG_VECBASE_BCR 0x68
#define ARC_REG_PERIBASE_BCR 0x69
@ -18,10 +19,10 @@
#define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */
#define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */
#define ARC_REG_SLC_BCR 0xce
#define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */
#define ARC_REG_DCCM_BUILD 0x74 /* DCCM size (common) */
#define ARC_REG_TIMERS_BCR 0x75
#define ARC_REG_AP_BCR 0x76
#define ARC_REG_ICCM_BCR 0x78
#define ARC_REG_ICCM_BUILD 0x78 /* ICCM size (common) */
#define ARC_REG_XY_MEM_BCR 0x79
#define ARC_REG_MAC_BCR 0x7a
#define ARC_REG_MUL_BCR 0x7b
@ -36,6 +37,7 @@
#define ARC_REG_IRQ_BCR 0xF3
#define ARC_REG_SMART_BCR 0xFF
#define ARC_REG_CLUSTER_BCR 0xcf
#define ARC_REG_AUX_ICCM 0x208 /* ICCM Base Addr (ARCv2) */
/* status32 Bits Positions */
#define STATUS_AE_BIT 5 /* Exception active */
@ -246,7 +248,7 @@ struct bcr_perip {
#endif
};
struct bcr_iccm {
struct bcr_iccm_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int base:16, pad:5, sz:3, ver:8;
#else
@ -254,17 +256,15 @@ struct bcr_iccm {
#endif
};
/* DCCM Base Address Register: ARC_REG_DCCMBASE_BCR */
struct bcr_dccm_base {
struct bcr_iccm_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int addr:24, ver:8;
unsigned int pad:8, sz11:4, sz01:4, sz10:4, sz00:4, ver:8;
#else
unsigned int ver:8, addr:24;
unsigned int ver:8, sz00:4, sz10:4, sz01:4, sz11:4, pad:8;
#endif
};
/* DCCM RAM Configuration Register: ARC_REG_DCCM_BCR */
struct bcr_dccm {
struct bcr_dccm_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int res:21, sz:3, ver:8;
#else
@ -272,6 +272,14 @@ struct bcr_dccm {
#endif
};
struct bcr_dccm_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad2:12, cyc:3, pad1:1, sz1:4, sz0:4, ver:8;
#else
unsigned int ver:8, sz0:4, sz1:4, pad1:1, cyc:3, pad2:12;
#endif
};
/* ARCompact: Both SP and DP FPU BCRs have same format */
struct bcr_fp_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
@ -315,9 +323,9 @@ struct bcr_bpu_arcv2 {
struct bcr_generic {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:24, ver:8;
unsigned int info:24, ver:8;
#else
unsigned int ver:8, pad:24;
unsigned int ver:8, info:24;
#endif
};
@ -349,14 +357,13 @@ struct cpuinfo_arc {
struct cpuinfo_arc_bpu bpu;
struct bcr_identity core;
struct bcr_isa isa;
struct bcr_timer timers;
unsigned int vec_base;
struct cpuinfo_arc_ccm iccm, dccm;
struct {
unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
fpu_sp:1, fpu_dp:1, pad2:6,
debug:1, ap:1, smart:1, rtt:1, pad3:4,
pad4:8;
timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
} extn;
struct bcr_mpy extn_mpy;
struct bcr_extn_xymem extn_xymem;

2
arch/arc/include/asm/irq.h
View File

@ -16,11 +16,9 @@
#ifdef CONFIG_ISA_ARCOMPACT
#define TIMER0_IRQ 3
#define TIMER1_IRQ 4
#define IPI_IRQ (NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
#else
#define TIMER0_IRQ 16
#define TIMER1_IRQ 17
#define IPI_IRQ 19
#endif
#include <linux/interrupt.h>

18
arch/arc/include/asm/irqflags-arcv2.h
View File

@ -22,6 +22,7 @@
#define AUX_IRQ_CTRL 0x00E
#define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */
#define AUX_IRQ_LVL_PEND 0x200 /* Pending Intr across all levels */
#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
#define AUX_IRQ_PRIORITY 0x206
#define ICAUSE 0x40a
#define AUX_IRQ_SELECT 0x40b
@ -30,8 +31,11 @@
/* Was Intr taken in User Mode */
#define AUX_IRQ_ACT_BIT_U 31
/* 0 is highest level, but taken by FIRQs, if present in design */
#define ARCV2_IRQ_DEF_PRIO 0
/*
* User space should be interruptable even by lowest prio interrupt
* Safe even if actual interrupt priorities is fewer or even one
*/
#define ARCV2_IRQ_DEF_PRIO 15
/* seed value for status register */
#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \
@ -112,6 +116,16 @@ static inline int arch_irqs_disabled(void)
return arch_irqs_disabled_flags(arch_local_save_flags());
}
static inline void arc_softirq_trigger(int irq)
{
write_aux_reg(AUX_IRQ_HINT, irq);
}
static inline void arc_softirq_clear(int irq)
{
write_aux_reg(AUX_IRQ_HINT, 0);
}
#else
.macro IRQ_DISABLE scratch

4
arch/arc/include/asm/mcip.h
View File

@ -39,8 +39,8 @@ struct mcip_cmd {
#define CMD_DEBUG_SET_MASK 0x34
#define CMD_DEBUG_SET_SELECT 0x36
#define CMD_GRTC_READ_LO 0x42
#define CMD_GRTC_READ_HI 0x43
#define CMD_GFRC_READ_LO 0x42
#define CMD_GFRC_READ_HI 0x43
#define CMD_IDU_ENABLE 0x71
#define CMD_IDU_DISABLE 0x72

45
arch/arc/include/asm/pgtable.h
View File

@ -179,37 +179,44 @@
#define __S111 PAGE_U_X_W_R
/****************************************************************
* Page Table Lookup split
* 2 tier (PGD:PTE) software page walker
*
* We implement 2 tier paging and since this is all software, we are free
* to customize the span of a PGD / PTE entry to suit us
*
* 32 bit virtual address
* [31] 32 bit virtual address [0]
* -------------------------------------------------------
* | BITS_FOR_PGD | BITS_FOR_PTE | BITS_IN_PAGE |
* | | <------------ PGDIR_SHIFT ----------> |
* | | |
* | BITS_FOR_PGD | BITS_FOR_PTE | <-- PAGE_SHIFT --> |
* -------------------------------------------------------
* | | |
* | | --> off in page frame
* | |
* | ---> index into Page Table
* |
* ----> index into Page Directory
*
* In a single page size configuration, only PAGE_SHIFT is fixed
* So both PGD and PTE sizing can be tweaked
* e.g. 8K page (PAGE_SHIFT 13) can have
* - PGDIR_SHIFT 21 -> 11:8:13 address split
* - PGDIR_SHIFT 24 -> 8:11:13 address split
*
* If Super Page is configured, PGDIR_SHIFT becomes fixed too,
* so the sizing flexibility is gone.
*/
#define BITS_IN_PAGE PAGE_SHIFT
/* Optimal Sizing of Pg Tbl - based on MMU page size */
#if defined(CONFIG_ARC_PAGE_SIZE_8K)
#define BITS_FOR_PTE 8 /* 11:8:13 */
#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
#define BITS_FOR_PTE 8 /* 10:8:14 */
#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
#define BITS_FOR_PTE 9 /* 11:9:12 */
#if defined(CONFIG_ARC_HUGEPAGE_16M)
#define PGDIR_SHIFT 24
#elif defined(CONFIG_ARC_HUGEPAGE_2M)
#define PGDIR_SHIFT 21
#else
/*
* Only Normal page support so "hackable" (see comment above)
* Default value provides 11:8:13 (8K), 11:9:12 (4K)
*/
#define PGDIR_SHIFT 21
#endif
#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE)
#define BITS_FOR_PTE (PGDIR_SHIFT - PAGE_SHIFT)
#define BITS_FOR_PGD (32 - PGDIR_SHIFT)
#define PGDIR_SHIFT (32 - BITS_FOR_PGD)
#define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */
#define PGDIR_MASK (~(PGDIR_SIZE-1))

30
arch/arc/kernel/entry-arcv2.S
View File

@ -45,11 +45,12 @@ VECTOR reserved ; Reserved slots
VECTOR handle_interrupt ; (16) Timer0
VECTOR handle_interrupt ; unused (Timer1)
VECTOR handle_interrupt ; unused (WDT)
VECTOR handle_interrupt ; (19) ICI (inter core interrupt)
VECTOR handle_interrupt
VECTOR handle_interrupt
VECTOR handle_interrupt
VECTOR handle_interrupt ; (23) End of fixed IRQs
VECTOR handle_interrupt ; (19) Inter core Interrupt (IPI)
VECTOR handle_interrupt ; (20) perf Interrupt
VECTOR handle_interrupt ; (21) Software Triggered Intr (Self IPI)
VECTOR handle_interrupt ; unused
VECTOR handle_interrupt ; (23) unused
# End of fixed IRQs
.rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
VECTOR handle_interrupt
@ -211,7 +212,11 @@ debug_marker_syscall:
; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
; entry was via Exception in DS which got preempted in kernel).
;
; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
;
; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
.Lintr_ret_to_delay_slot:
debug_marker_ds:
@ -222,18 +227,23 @@ debug_marker_ds:
ld r2, [sp, PT_ret]
ld r3, [sp, PT_status32]
; STAT32 for Int return created from scratch
; (No delay dlot, disable Further intr in trampoline)
bic r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
st r0, [sp, PT_status32]
mov r1, .Lintr_ret_to_delay_slot_2
st r1, [sp, PT_ret]
; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
st r2, [sp, 0]
st r3, [sp, 4]
b .Lisr_ret_fast_path
.Lintr_ret_to_delay_slot_2:
; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
sub sp, sp, SZ_PT_REGS
st r9, [sp, -4]
@ -243,11 +253,19 @@ debug_marker_ds:
ld r9, [sp, 4]
sr r9, [erstatus]
; restore AUX_USER_SP if returning to U mode
bbit0 r9, STATUS_U_BIT, 1f
ld r9, [sp, PT_sp]
sr r9, [AUX_USER_SP]
1:
ld r9, [sp, 8]
sr r9, [erbta]
ld r9, [sp, -4]
add sp, sp, SZ_PT_REGS
; return from pure kernel mode to delay slot
rtie
END(ret_from_exception)

41
arch/arc/kernel/intc-arcv2.c
View File

@ -14,6 +14,8 @@
#include <linux/irqchip.h>
#include <asm/irq.h>
static int irq_prio;
/*
* Early Hardware specific Interrupt setup
* -Called very early (start_kernel -> setup_arch -> setup_processor)
@ -24,6 +26,14 @@ void arc_init_IRQ(void)
{
unsigned int tmp;
struct irq_build {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
#else
unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
#endif
} irq_bcr;
struct aux_irq_ctrl {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int res3:18, save_idx_regs:1, res2:1,
@ -46,28 +56,25 @@ void arc_init_IRQ(void)
WRITE_AUX(AUX_IRQ_CTRL, ictrl);
/* setup status32, don't enable intr yet as kernel doesn't want */
tmp = read_aux_reg(0xa);
tmp |= ISA_INIT_STATUS_BITS;
tmp &= ~STATUS_IE_MASK;
asm volatile("flag %0 \n"::"r"(tmp));
/*
* ARCv2 core intc provides multiple interrupt priorities (upto 16).
* Typical builds though have only two levels (0-high, 1-low)
* Linux by default uses lower prio 1 for most irqs, reserving 0 for
* NMI style interrupts in future (say perf)
*
* Read the intc BCR to confirm that Linux default priority is avail
* in h/w
*
* Note:
* IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
* is 0 based.
*/
tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
if (ARCV2_IRQ_DEF_PRIO > tmp)
panic("Linux default irq prio incorrect\n");
READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
irq_prio = irq_bcr.prio; /* Encoded as N-1 for N levels */
pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
irq_prio + 1, irq_prio,
irq_bcr.firq ? " FIRQ (not used)":"");
/* setup status32, don't enable intr yet as kernel doesn't want */
tmp = read_aux_reg(0xa);
tmp |= STATUS_AD_MASK | (irq_prio << 1);
tmp &= ~STATUS_IE_MASK;
asm volatile("flag %0 \n"::"r"(tmp));
}
static void arcv2_irq_mask(struct irq_data *data)
@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data)
{
/* set default priority */
write_aux_reg(AUX_IRQ_SELECT, data->irq);
write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
write_aux_reg(AUX_IRQ_PRIORITY, irq_prio);
/*
* hw auto enables (linux unmask) all by default

3
arch/arc/kernel/intc-compact.c
View File

@ -81,9 +81,6 @@ static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
{
switch (irq) {
case TIMER0_IRQ:
#ifdef CONFIG_SMP
case IPI_IRQ:
#endif
irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
break;
default:

70
arch/arc/kernel/mcip.c
View File

@ -11,9 +11,13 @@
#include <linux/smp.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <asm/irqflags-arcv2.h>
#include <asm/mcip.h>
#include <asm/setup.h>
#define IPI_IRQ 19
#define SOFTIRQ_IRQ 21
static char smp_cpuinfo_buf[128];
static int idu_detected;
@ -22,6 +26,7 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
static void mcip_setup_per_cpu(int cpu)
{
smp_ipi_irq_setup(cpu, IPI_IRQ);
smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
}
static void mcip_ipi_send(int cpu)
@ -29,46 +34,44 @@ static void mcip_ipi_send(int cpu)
unsigned long flags;
int ipi_was_pending;
/* ARConnect can only send IPI to others */
if (unlikely(cpu == raw_smp_processor_id())) {
arc_softirq_trigger(SOFTIRQ_IRQ);
return;
}
raw_spin_lock_irqsave(&mcip_lock, flags);
/*
* NOTE: We must spin here if the other cpu hasn't yet
* serviced a previous message. This can burn lots
* of time, but we MUST follows this protocol or
* ipi messages can be lost!!!
* Also, we must release the lock in this loop because
* the other side may get to this same loop and not
* be able to ack -- thus causing deadlock.
* If receiver already has a pending interrupt, elide sending this one.
* Linux cross core calling works well with concurrent IPIs
* coalesced into one
* see arch/arc/kernel/smp.c: ipi_send_msg_one()
*/
__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
if (!ipi_was_pending)
__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
do {
raw_spin_lock_irqsave(&mcip_lock, flags);
__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
if (ipi_was_pending == 0)
break; /* break out but keep lock */
raw_spin_unlock_irqrestore(&mcip_lock, flags);
} while (1);
__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
raw_spin_unlock_irqrestore(&mcip_lock, flags);
#ifdef CONFIG_ARC_IPI_DBG
if (ipi_was_pending)
pr_info("IPI ACK delayed from cpu %d\n", cpu);
#endif
}
static void mcip_ipi_clear(int irq)
{
unsigned int cpu, c;
unsigned long flags;
unsigned int __maybe_unused copy;
if (unlikely(irq == SOFTIRQ_IRQ)) {
arc_softirq_clear(irq);
return;
}
raw_spin_lock_irqsave(&mcip_lock, flags);
/* Who sent the IPI */
__mcip_cmd(CMD_INTRPT_CHECK_SOURCE, 0);
copy = cpu = read_aux_reg(ARC_REG_MCIP_READBACK); /* 1,2,4,8... */
cpu = read_aux_reg(ARC_REG_MCIP_READBACK); /* 1,2,4,8... */
/*
* In rare case, multiple concurrent IPIs sent to same target can
@ -82,12 +85,6 @@ static void mcip_ipi_clear(int irq)
} while (cpu);
raw_spin_unlock_irqrestore(&mcip_lock, flags);
#ifdef CONFIG_ARC_IPI_DBG
if (c != __ffs(copy))
pr_info("IPIs from %x coalesced to %x\n",
copy, raw_smp_processor_id());
#endif
}
static void mcip_probe_n_setup(void)
@ -96,13 +93,13 @@ static void mcip_probe_n_setup(void)
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad3:8,
idu:1, llm:1, num_cores:6,
iocoh:1, grtc:1, dbg:1, pad2:1,
iocoh:1, gfrc:1, dbg:1, pad2:1,
msg:1, sem:1, ipi:1, pad:1,
ver:8;
#else
unsigned int ver:8,
pad:1, ipi:1, sem:1, msg:1,
pad2:1, dbg:1, grtc:1, iocoh:1,
pad2:1, dbg:1, gfrc:1, iocoh:1,
num_cores:6, llm:1, idu:1,
pad3:8;
#endif
@ -111,12 +108,13 @@ static void mcip_probe_n_setup(void)
READ_BCR(ARC_REG_MCIP_BCR, mp);
sprintf(smp_cpuinfo_buf,
"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
mp.ver, mp.num_cores,
IS_AVAIL1(mp.ipi, "IPI "),
IS_AVAIL1(mp.idu, "IDU "),
IS_AVAIL1(mp.llm, "LLM "),
IS_AVAIL1(mp.dbg, "DEBUG "),
IS_AVAIL1(mp.grtc, "GRTC"));
IS_AVAIL1(mp.gfrc, "GFRC"));
idu_detected = mp.idu;
@ -125,8 +123,8 @@ static void mcip_probe_n_setup(void)
__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
}
if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc)
panic("kernel trying to use non-existent GRTC\n");
if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
panic("kernel trying to use non-existent GFRC\n");
}
struct plat_smp_ops plat_smp_ops = {

100
arch/arc/kernel/setup.c
View File

@ -42,9 +42,57 @@ struct task_struct *_current_task[NR_CPUS]; /* For stack switching */
struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
{
if (is_isa_arcompact()) {
struct bcr_iccm_arcompact iccm;
struct bcr_dccm_arcompact dccm;
READ_BCR(ARC_REG_ICCM_BUILD, iccm);
if (iccm.ver) {
cpu->iccm.sz = 4096 << iccm.sz; /* 8K to 512K */
cpu->iccm.base_addr = iccm.base << 16;
}
READ_BCR(ARC_REG_DCCM_BUILD, dccm);
if (dccm.ver) {
unsigned long base;
cpu->dccm.sz = 2048 << dccm.sz; /* 2K to 256K */
base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
cpu->dccm.base_addr = base & ~0xF;
}
} else {
struct bcr_iccm_arcv2 iccm;
struct bcr_dccm_arcv2 dccm;
unsigned long region;
READ_BCR(ARC_REG_ICCM_BUILD, iccm);
if (iccm.ver) {
cpu->iccm.sz = 256 << iccm.sz00; /* 512B to 16M */
if (iccm.sz00 == 0xF && iccm.sz01 > 0)
cpu->iccm.sz <<= iccm.sz01;
region = read_aux_reg(ARC_REG_AUX_ICCM);
cpu->iccm.base_addr = region & 0xF0000000;
}
READ_BCR(ARC_REG_DCCM_BUILD, dccm);
if (dccm.ver) {
cpu->dccm.sz = 256 << dccm.sz0;
if (dccm.sz0 == 0xF && dccm.sz1 > 0)
cpu->dccm.sz <<= dccm.sz1;
region = read_aux_reg(ARC_REG_AUX_DCCM);
cpu->dccm.base_addr = region & 0xF0000000;
}
}
}
static void read_arc_build_cfg_regs(void)
{
struct bcr_perip uncached_space;
struct bcr_timer timer;
struct bcr_generic bcr;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
unsigned long perip_space;
@ -53,7 +101,11 @@ static void read_arc_build_cfg_regs(void)
READ_BCR(AUX_IDENTITY, cpu->core);
READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers);
READ_BCR(ARC_REG_TIMERS_BCR, timer);
cpu->extn.timer0 = timer.t0;
cpu->extn.timer1 = timer.t1;
cpu->extn.rtc = timer.rtc;
cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
@ -71,36 +123,11 @@ static void read_arc_build_cfg_regs(void)
cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0; /* 1,3 */
cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
/* Note that we read the CCM BCRs independent of kernel config
* This is to catch the cases where user doesn't know that
* CCMs are present in hardware build
*/
{
struct bcr_iccm iccm;
struct bcr_dccm dccm;
struct bcr_dccm_base dccm_base;
unsigned int bcr_32bit_val;
bcr_32bit_val = read_aux_reg(ARC_REG_ICCM_BCR);
if (bcr_32bit_val) {
iccm = *((struct bcr_iccm *)&bcr_32bit_val);
cpu->iccm.base_addr = iccm.base << 16;
cpu->iccm.sz = 0x2000 << (iccm.sz - 1);
}
bcr_32bit_val = read_aux_reg(ARC_REG_DCCM_BCR);
if (bcr_32bit_val) {
dccm = *((struct bcr_dccm *)&bcr_32bit_val);
cpu->dccm.sz = 0x800 << (dccm.sz);
READ_BCR(ARC_REG_DCCMBASE_BCR, dccm_base);
cpu->dccm.base_addr = dccm_base.addr << 8;
}
}
READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
read_decode_ccm_bcr(cpu);
read_decode_mmu_bcr();
read_decode_cache_bcr();
@ -208,9 +235,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
(unsigned int)(arc_get_core_freq() / 10000) % 100);
n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
IS_AVAIL1(cpu->timers.t0, "Timer0 "),
IS_AVAIL1(cpu->timers.t1, "Timer1 "),
IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ",
IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ",
CONFIG_ARC_HAS_RTC));
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
@ -232,8 +259,6 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
}
n += scnprintf(buf + n, len - n, "%s",
IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
}
n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
@ -293,13 +318,13 @@ static void arc_chk_core_config(void)
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
int fpu_enabled;
if (!cpu->timers.t0)
if (!cpu->extn.timer0)
panic("Timer0 is not present!\n");
if (!cpu->timers.t1)
if (!cpu->extn.timer1)
panic("Timer1 is not present!\n");
if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc)
if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
panic("RTC is not present\n");
#ifdef CONFIG_ARC_HAS_DCCM
@ -334,6 +359,7 @@ static void arc_chk_core_config(void)
panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
IS_ENABLED(CONFIG_ARC_HAS_LLSC) &&
!IS_ENABLED(CONFIG_ARC_STAR_9000923308))
panic("llock/scond livelock workaround missing\n");
}

3
arch/arc/kernel/smp.c
View File

@ -336,11 +336,8 @@ irqreturn_t do_IPI(int irq, void *dev_id)
int rc;
rc = __do_IPI(msg);
#ifdef CONFIG_ARC_IPI_DBG
/* IPI received but no valid @msg */
if (rc)
pr_info("IPI with bogus msg %ld in %ld\n", msg, copy);
#endif
pending &= ~(1U << msg);
} while (pending);

8
arch/arc/kernel/time.c
View File

@ -62,7 +62,7 @@
/********** Clock Source Device *********/
#ifdef CONFIG_ARC_HAS_GRTC
#ifdef CONFIG_ARC_HAS_GFRC
static int arc_counter_setup(void)
{
@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs)
local_irq_save(flags);
__mcip_cmd(CMD_GRTC_READ_LO, 0);
__mcip_cmd(CMD_GFRC_READ_LO, 0);
stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
__mcip_cmd(CMD_GRTC_READ_HI, 0);
__mcip_cmd(CMD_GFRC_READ_HI, 0);
stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
local_irq_restore(flags);
@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs)
}
static struct clocksource arc_counter = {
.name = "ARConnect GRTC",
.name = "ARConnect GFRC",
.rating = 400,
.read = arc_counter_read,
.mask = CLOCKSOURCE_MASK(64),

14
arch/arm/boot/dts/am335x-bone-common.dtsi
View File

@ -285,8 +285,10 @@ cape3_data: cape_data@0 {
};
};
/include/ "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
@ -307,17 +309,12 @@ &tps {
ti,pmic-shutdown-controller;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -327,7 +324,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -337,25 +333,21 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};

14
arch/arm/boot/dts/am335x-chilisom.dtsi
View File

@ -128,21 +128,16 @@ tps: tps@24 {
};
/include/ "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -152,7 +147,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -162,28 +156,24 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;

14
arch/arm/boot/dts/am335x-nano.dts
View File

@ -375,15 +375,11 @@ &mmc1 {
wp-gpios = <&gpio3 18 0>;
};
#include "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
@ -392,7 +388,6 @@ dcdc1_reg: regulator@0 {
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
@ -402,7 +397,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
@ -412,7 +406,6 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@ -421,7 +414,6 @@ ldo1_reg: regulator@3 {
};
ldo2_reg: regulator@4 {
reg = <4>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
@ -430,7 +422,6 @@ ldo2_reg: regulator@4 {
};
ldo3_reg: regulator@5 {
reg = <5>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@ -439,7 +430,6 @@ ldo3_reg: regulator@5 {
};
ldo4_reg: regulator@6 {
reg = <6>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;

14
arch/arm/boot/dts/am335x-pepper.dts
View File

@ -420,9 +420,9 @@ &vdd5_reg {
vin-supply = <&vbat>;
};
&tps {
compatible = "ti,tps65217";
/include/ "tps65217.dtsi"
&tps {
backlight {
isel = <1>; /* ISET1 */
fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@ -430,17 +430,12 @@ backlight {
};
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -450,7 +445,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -460,21 +454,18 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
@ -482,7 +473,6 @@ ldo3_reg: regulator@5 {
};
ldo4_reg: regulator@6 {
reg = <6>;
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;

4
arch/arm/boot/dts/am335x-shc.dts
View File

@ -46,7 +46,7 @@ back_button {
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
debounce-interval = <1000>;
gpio-key,wakeup;
wakeup-source;
};
front_button {
@ -54,7 +54,7 @@ front_button {
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
debounce-interval = <1000>;
gpio-key,wakeup;
wakeup-source;
};
};

13
arch/arm/boot/dts/am335x-sl50.dts
View File

@ -375,19 +375,16 @@ &uart4 {
pinctrl-0 = <&uart4_pins>;
};
#include "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NNMI */
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* VDDS_DDR */
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@ -395,7 +392,6 @@ dcdc1_reg: regulator@0 {
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -405,7 +401,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -415,7 +410,6 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
/* VRTC / VIO / VDDS*/
regulator-always-on;
regulator-min-microvolt = <1800000>;
@ -423,7 +417,6 @@ ldo1_reg: regulator@3 {
};
ldo2_reg: regulator@4 {
reg = <4>;
/* VDD_3V3AUX */
regulator-always-on;
regulator-min-microvolt = <3300000>;
@ -431,7 +424,6 @@ ldo2_reg: regulator@4 {
};
ldo3_reg: regulator@5 {
reg = <5>;
/* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -439,7 +431,6 @@ ldo3_reg: regulator@5 {
};
ldo4_reg: regulator@6 {
reg = <6>;
/* VDD_3V3A */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

4
arch/arm/boot/dts/am57xx-beagle-x15.dts
View File

@ -173,6 +173,8 @@ simple-audio-card,cpu {
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3104>;
assigned-clocks = <&clkoutmux2_clk_mux>;
assigned-clock-parents = <&sys_clk2_dclk_div>;
clocks = <&clkout2_clk>;
};
};
@ -796,6 +798,8 @@ &mcasp3 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins_default>;
pinctrl-1 = <&mcasp3_pins_sleep>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&sys_clkin2>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */

2
arch/arm/boot/dts/am57xx-cl-som-am57x.dts
View File

@ -545,7 +545,7 @@ ads7846@0 {
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
linux,wakeup;
wakeup-source;
};
};

1
arch/arm/boot/dts/imx6qdl.dtsi
View File

@ -896,7 +896,6 @@ crypto: caam@2100000 {
#size-cells = <1>;
reg = <0x2100000 0x10000>;
ranges = <0 0x2100000 0x10000>;
interrupt-parent = <&intc>;
clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
<&clks IMX6QDL_CLK_CAAM_ACLK>,
<&clks IMX6QDL_CLK_CAAM_IPG>,

2
arch/arm/boot/dts/kirkwood-ds112.dts
View File

@ -14,7 +14,7 @@
#include "kirkwood-synology.dtsi"
/ {
model = "Synology DS111";
model = "Synology DS112";
compatible = "synology,ds111", "marvell,kirkwood";
memory {

31
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
View File

@ -228,6 +228,37 @@ hdd_power: regulator@2 {
};
};
&devbus_bootcs {
status = "okay";
devbus,keep-config;
flash@0 {
compatible = "jedec-flash";
reg = <0 0x40000>;
bank-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
header@0 {
reg = <0 0x30000>;
read-only;
};
uboot@30000 {
reg = <0x30000 0xF000>;
read-only;
};
uboot_env@3F000 {
reg = <0x3F000 0x1000>;
};
};
};
};
&mdio {
status = "okay";

2
arch/arm/boot/dts/sama5d2-pinfunc.h
View File

@ -90,7 +90,7 @@
#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2)
#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1)
#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2)
#define PIN_PA15 14
#define PIN_PA15 15
#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1)
#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1)

56
arch/arm/boot/dts/tps65217.dtsi Normal file
View File

@ -0,0 +1,56 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Integrated Power Management Chip
* http://www.ti.com/lit/ds/symlink/tps65217.pdf
*/
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-compatible = "dcdc1";
};
dcdc2_reg: regulator@1 {
reg = <1>;
regulator-compatible = "dcdc2";
};
dcdc3_reg: regulator@2 {
reg = <2>;
regulator-compatible = "dcdc3";
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-compatible = "ldo1";
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-compatible = "ldo2";
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-compatible = "ldo3";
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-compatible = "ldo4";
};
};
};

9
arch/arm/common/icst.c
View File

@ -16,7 +16,7 @@
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/div64.h>
#include <asm/hardware/icst.h>
/*
@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
{
return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
u32 divisor = (vco.r + 2) * p->s2div[vco.s];
do_div(dividend, divisor);
return (unsigned long)dividend;
}
EXPORT_SYMBOL(icst_hz);
@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
if (f > p->vco_min && f <= p->vco_max)
break;
i++;
} while (i < 8);
if (i >= 8)

33
arch/arm/configs/omap2plus_defconfig
View File

@ -292,24 +292,23 @@ CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_OMAP2_DSS=m
CONFIG_OMAP5_DSS_HDMI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP5_DSS_HDMI=y
CONFIG_FB_OMAP2_DSS_SDI=y
CONFIG_FB_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2=m
CONFIG_DISPLAY_ENCODER_TFP410=m
CONFIG_DISPLAY_ENCODER_TPD12S015=m
CONFIG_DISPLAY_CONNECTOR_DVI=m
CONFIG_DISPLAY_CONNECTOR_HDMI=m
CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
CONFIG_DISPLAY_PANEL_DPI=m
CONFIG_DISPLAY_PANEL_DSI_CM=m
CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
CONFIG_FB_OMAP2_ENCODER_TFP410=m
CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
CONFIG_FB_OMAP2_CONNECTOR_DVI=m
CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
CONFIG_FB_OMAP2_PANEL_DPI=m
CONFIG_FB_OMAP2_PANEL_DSI_CM=m
CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y

4
arch/arm/crypto/aes-ce-glue.c
View File

@ -364,7 +364,7 @@ static struct crypto_alg aes_algs[] = { {
.cra_blkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.ivsize = 0,
.setkey = ce_aes_setkey,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
@ -441,7 +441,7 @@ static struct crypto_alg aes_algs[] = { {
.cra_ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.ivsize = 0,
.setkey = ablk_set_key,
.encrypt = ablk_encrypt,
.decrypt = ablk_decrypt,

1
arch/arm/include/asm/arch_gicv3.h
View File

@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void)
u32 irqstat;
asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
dsb(sy);
return irqstat;
}

21
arch/arm/include/asm/xen/page-coherent.h
View File

@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
dma_addr_t dev_addr, unsigned long offset, size_t size,
enum dma_data_direction dir, struct dma_attrs *attrs)
{
bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page);
unsigned long page_pfn = page_to_xen_pfn(page);
unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
unsigned long compound_pages =
(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
bool local = (page_pfn <= dev_pfn) &&
(dev_pfn - page_pfn < compound_pages);
/*
* Dom0 is mapped 1:1, while the Linux page can be spanned accross
* multiple Xen page, it's not possible to have a mix of local and
* foreign Xen page. So if the first xen_pfn == mfn the page is local
* otherwise it's a foreign page grant-mapped in dom0. If the page is
* local we can safely call the native dma_ops function, otherwise we
* call the xen specific function.
* Dom0 is mapped 1:1, while the Linux page can span across
* multiple Xen pages, it's not possible for it to contain a
* mix of local and foreign Xen pages. So if the first xen_pfn
* == mfn the page is local otherwise it's a foreign page
* grant-mapped in dom0. If the page is local we can safely
* call the native dma_ops function, otherwise we call the xen
* specific function.
*/
if (local)
__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);

3
arch/arm/kvm/mmio.c
View File

@ -206,7 +206,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
run->mmio.is_write = is_write;
run->mmio.phys_addr = fault_ipa;
run->mmio.len = len;
memcpy(run->mmio.data, data_buf, len);
if (is_write)
memcpy(run->mmio.data, data_buf, len);
if (!ret) {
/* We handled the access successfully in the kernel. */

22
arch/arm/mach-omap2/board-generic.c
View File

@ -18,6 +18,7 @@
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/system_info.h>
#include "common.h"
@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = {
NULL,
};
/* Set system_rev from atags */
static void __init rx51_set_system_rev(const struct tag *tags)
{
const struct tag *tag;
if (tags->hdr.tag != ATAG_CORE)
return;
for_each_tag(tag, tags) {
if (tag->hdr.tag == ATAG_REVISION) {
system_rev = tag->u.revision.rev;
break;
}
}
}
/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
* save them while the data is still not overwritten
*/
static void __init rx51_reserve(void)
{
save_atags((const struct tag *)(PAGE_OFFSET + 0x100));
const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100);
save_atags(tags);
rx51_set_system_rev(tags);
omap_reserve();
}

6
arch/arm/mach-omap2/gpmc-onenand.c
View File

@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
static void set_onenand_cfg(void __iomem *onenand_base)
{
u32 reg;
u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT;
reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
ONENAND_SYS_CFG1_BL_16;
if (onenand_flags & ONENAND_FLAG_SYNCREAD)
@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base)
reg |= ONENAND_SYS_CFG1_VHF;
else
reg &= ~ONENAND_SYS_CFG1_VHF;
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
}
@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
}
}
onenand_async.sync_write = true;
omap2_onenand_calc_async_timings(&t);
ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);

14
arch/arm/mach-omap2/omap_device.c
View File

@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od;
int err;
switch (event) {
case BUS_NOTIFY_DEL_DEVICE:
if (pdev->archdata.od)
omap_device_delete(pdev->archdata.od);
break;
case BUS_NOTIFY_UNBOUND_DRIVER:
od = to_omap_device(pdev);
if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
dev_info(dev, "enabled after unload, idling\n");
err = omap_device_idle(pdev);
if (err)
dev_err(dev, "failed to idle\n");
}
break;
case BUS_NOTIFY_ADD_DEVICE:
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev)
int ret;
ret = omap_device_enable(pdev);
if (ret)
if (ret) {
dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n");
return ret;
}
return pm_generic_runtime_resume(dev);
}

1
arch/arm/mach-shmobile/common.h
View File

@ -4,7 +4,6 @@
extern void shmobile_init_delay(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_arg;
extern unsigned long shmobile_boot_size;
extern void shmobile_smp_boot(void);
extern void shmobile_smp_sleep(void);

6
arch/arm/mach-shmobile/headsmp-scu.S
View File

@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu)
b secondary_startup
ENDPROC(shmobile_boot_scu)
.text
.align 2
.globl shmobile_scu_base
shmobile_scu_base:
.space 4

28
arch/arm/mach-shmobile/headsmp.S
View File

@ -24,7 +24,6 @@
.arm
.align 12
ENTRY(shmobile_boot_vector)
ldr r0, 2f
ldr r1, 1f
bx r1
@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector)
.globl shmobile_boot_fn
shmobile_boot_fn:
1: .space 4
.globl shmobile_boot_arg
shmobile_boot_arg:
2: .space 4
.globl shmobile_boot_size
shmobile_boot_size:
.long . - shmobile_boot_vector
@ -46,13 +42,15 @@ shmobile_boot_size:
*/
ENTRY(shmobile_smp_boot)
@ r0 = MPIDR_HWID_BITMASK
mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR
and r0, r1, r0 @ r0 = cpu_logical_map() value
and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK
@ r0 = cpu_logical_map() value
mov r1, #0 @ r1 = CPU index
adr r5, 1f @ array of per-cpu mpidr values
adr r6, 2f @ array of per-cpu functions
adr r7, 3f @ array of per-cpu arguments
adr r2, 1f
ldmia r2, {r5, r6, r7}
add r5, r5, r2 @ array of per-cpu mpidr values
add r6, r6, r2 @ array of per-cpu functions
add r7, r7, r2 @ array of per-cpu arguments
shmobile_smp_boot_find_mpidr:
ldr r8, [r5, r1, lsl #2]
@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep)
b shmobile_smp_boot
ENDPROC(shmobile_smp_sleep)
.align 2
1: .long shmobile_smp_mpidr - .
.long shmobile_smp_fn - 1b
.long shmobile_smp_arg - 1b
.bss
.globl shmobile_smp_mpidr
shmobile_smp_mpidr:
1: .space NR_CPUS * 4
.space NR_CPUS * 4
.globl shmobile_smp_fn
shmobile_smp_fn:
2: .space NR_CPUS * 4
.space NR_CPUS * 4
.globl shmobile_smp_arg
shmobile_smp_arg:
3: .space NR_CPUS * 4
.space NR_CPUS * 4

1
arch/arm/mach-shmobile/platsmp-apmu.c
View File

@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
shmobile_boot_arg = MPIDR_HWID_BITMASK;
/* perform per-cpu setup */
apmu_parse_cfg(apmu_init_cpu, apmu_config, num);

4
arch/arm/mach-shmobile/platsmp-scu.c
View File

@ -17,6 +17,9 @@
#include <asm/smp_scu.h>
#include "common.h"
void __iomem *shmobile_scu_base;
static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
@ -41,7 +44,6 @@ void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
shmobile_boot_arg = MPIDR_HWID_BITMASK;
/* enable SCU and cache coherency on booting CPU */
scu_enable(shmobile_scu_base);

2
arch/arm/mach-shmobile/smp-r8a7779.c
View File

@ -92,8 +92,6 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
{
/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
__raw_writel(__pa(shmobile_boot_vector), AVECR);
shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
shmobile_boot_arg = (unsigned long)shmobile_scu_base;
/* setup r8a7779 specific SCU bits */
shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);

2
arch/arm/mm/mmap.c
View File

@ -173,7 +173,7 @@ unsigned long arch_mmap_rnd(void)
{
unsigned long rnd;
rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1);
rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
return rnd << PAGE_SHIFT;
}

2
arch/arm64/Makefile
View File

@ -88,7 +88,7 @@ Image: vmlinux
Image.%: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
zinstall install: vmlinux
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
%.dtb: scripts

4
arch/arm64/boot/Makefile
View File

@ -34,10 +34,10 @@ $(obj)/Image.lzma: $(obj)/Image FORCE
$(obj)/Image.lzo: $(obj)/Image FORCE
$(call if_changed,lzo)
install: $(obj)/Image
install:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
zinstall: $(obj)/Image.gz
zinstall:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image.gz System.map "$(INSTALL_PATH)"

14
arch/arm64/boot/install.sh
View File

@ -20,6 +20,20 @@
# $4 - default install path (blank if root directory)
#
verify () {
if [ ! -f "$1" ]; then
echo "" 1>&2
echo " *** Missing file: $1" 1>&2
echo ' *** You need to run "make" before "make install".' 1>&2
echo "" 1>&2
exit 1
fi
}
# Make sure the files actually exist
verify "$2"
verify "$3"
# User may have a custom install script
if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi

4
arch/arm64/crypto/aes-glue.c
View File

@ -294,7 +294,7 @@ static struct crypto_alg aes_algs[] = { {
.cra_blkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.ivsize = 0,
.setkey = aes_setkey,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
@ -371,7 +371,7 @@ static struct crypto_alg aes_algs[] = { {
.cra_ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.ivsize = 0,
.setkey = ablk_set_key,
.encrypt = ablk_encrypt,
.decrypt = ablk_decrypt,

1
arch/arm64/include/asm/arch_gicv3.h
View File

@ -103,6 +103,7 @@ static inline u64 gic_read_iar_common(void)
u64 irqstat;
asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
dsb(sy);
return irqstat;
}

3
arch/arm64/include/asm/kvm_arm.h
View File

@ -107,8 +107,6 @@
#define TCR_EL2_MASK (TCR_EL2_TG0 | TCR_EL2_SH0 | \
TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ)
#define TCR_EL2_FLAGS (TCR_EL2_RES1 | TCR_EL2_PS_40B)
/* VTCR_EL2 Registers bits */
#define VTCR_EL2_RES1 (1 << 31)
#define VTCR_EL2_PS_MASK (7 << 16)
@ -182,6 +180,7 @@
#define CPTR_EL2_TCPAC (1 << 31)
#define CPTR_EL2_TTA (1 << 20)
#define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT)
#define CPTR_EL2_DEFAULT 0x000033ff
/* Hyp Debug Configuration Register bits */
#define MDCR_EL2_TDRA (1 << 11)

8
arch/arm64/include/asm/kvm_emulate.h
View File

@ -127,10 +127,14 @@ static inline unsigned long *vcpu_spsr(const struct kvm_vcpu *vcpu)
static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu)
{
u32 mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
u32 mode;
if (vcpu_mode_is_32bit(vcpu))
if (vcpu_mode_is_32bit(vcpu)) {
mode = *vcpu_cpsr(vcpu) & COMPAT_PSR_MODE_MASK;
return mode > COMPAT_PSR_MODE_USR;
}
mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
return mode != PSR_MODE_EL0t;
}

48
arch/arm64/kernel/debug-monitors.c
View File

@ -226,11 +226,28 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr)
return retval;
}
static void send_user_sigtrap(int si_code)
{
struct pt_regs *regs = current_pt_regs();
siginfo_t info = {
.si_signo = SIGTRAP,
.si_errno = 0,
.si_code = si_code,
.si_addr = (void __user *)instruction_pointer(regs),
};
if (WARN_ON(!user_mode(regs)))
return;
if (interrupts_enabled(regs))
local_irq_enable();
force_sig_info(SIGTRAP, &info, current);
}
static int single_step_handler(unsigned long addr, unsigned int esr,
struct pt_regs *regs)
{
siginfo_t info;
/*
* If we are stepping a pending breakpoint, call the hw_breakpoint
* handler first.
@ -239,11 +256,7 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
return 0;
if (user_mode(regs)) {
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_HWBKPT;
info.si_addr = (void __user *)instruction_pointer(regs);
force_sig_info(SIGTRAP, &info, current);
send_user_sigtrap(TRAP_HWBKPT);
/*
* ptrace will disable single step unless explicitly
@ -307,17 +320,8 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
static int brk_handler(unsigned long addr, unsigned int esr,
struct pt_regs *regs)
{
siginfo_t info;
if (user_mode(regs)) {
info = (siginfo_t) {
.si_signo = SIGTRAP,
.si_errno = 0,
.si_code = TRAP_BRKPT,
.si_addr = (void __user *)instruction_pointer(regs),
};
force_sig_info(SIGTRAP, &info, current);
send_user_sigtrap(TRAP_BRKPT);
} else if (call_break_hook(regs, esr) != DBG_HOOK_HANDLED) {
pr_warning("Unexpected kernel BRK exception at EL1\n");
return -EFAULT;
@ -328,7 +332,6 @@ static int brk_handler(unsigned long addr, unsigned int esr,
int aarch32_break_handler(struct pt_regs *regs)
{
siginfo_t info;
u32 arm_instr;
u16 thumb_instr;
bool bp = false;
@ -359,14 +362,7 @@ int aarch32_break_handler(struct pt_regs *regs)
if (!bp)
return -EFAULT;
info = (siginfo_t) {
.si_signo = SIGTRAP,
.si_errno = 0,
.si_code = TRAP_BRKPT,
.si_addr = pc,
};
force_sig_info(SIGTRAP, &info, current);
send_user_sigtrap(TRAP_BRKPT);
return 0;
}

1
arch/arm64/kernel/image.h
View File

@ -89,6 +89,7 @@ __efistub_memcpy = KALLSYMS_HIDE(__pi_memcpy);
__efistub_memmove = KALLSYMS_HIDE(__pi_memmove);
__efistub_memset = KALLSYMS_HIDE(__pi_memset);
__efistub_strlen = KALLSYMS_HIDE(__pi_strlen);
__efistub_strnlen = KALLSYMS_HIDE(__pi_strnlen);
__efistub_strcmp = KALLSYMS_HIDE(__pi_strcmp);
__efistub_strncmp = KALLSYMS_HIDE(__pi_strncmp);
__efistub___flush_dcache_area = KALLSYMS_HIDE(__pi___flush_dcache_area);

17
arch/arm64/kernel/stacktrace.c
View File

@ -44,14 +44,13 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
unsigned long irq_stack_ptr;
/*
* Use raw_smp_processor_id() to avoid false-positives from
* CONFIG_DEBUG_PREEMPT. get_wchan() calls unwind_frame() on sleeping
* task stacks, we can be pre-empted in this case, so
* {raw_,}smp_processor_id() may give us the wrong value. Sleeping
* tasks can't ever be on an interrupt stack, so regardless of cpu,
* the checks will always fail.
* Switching between stacks is valid when tracing current and in
* non-preemptible context.
*/
irq_stack_ptr = IRQ_STACK_PTR(raw_smp_processor_id());
if (tsk == current && !preemptible())
irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
else
irq_stack_ptr = 0;
low = frame->sp;
/* irq stacks are not THREAD_SIZE aligned */
@ -64,8 +63,8 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
return -EINVAL;
frame->sp = fp + 0x10;
frame->fp = *(unsigned long *)(fp);
frame->pc = *(unsigned long *)(fp + 8);
frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
if (tsk && tsk->ret_stack &&

11
arch/arm64/kernel/traps.c
View File

@ -146,9 +146,18 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
{
struct stackframe frame;
unsigned long irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
unsigned long irq_stack_ptr;
int skip;
/*
* Switching between stacks is valid when tracing current and in
* non-preemptible context.
*/
if (tsk == current && !preemptible())
irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
else
irq_stack_ptr = 0;
pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
if (!tsk)

14
arch/arm64/kvm/hyp-init.S
View File

@ -64,7 +64,7 @@ __do_hyp_init:
mrs x4, tcr_el1
ldr x5, =TCR_EL2_MASK
and x4, x4, x5
ldr x5, =TCR_EL2_FLAGS
mov x5, #TCR_EL2_RES1
orr x4, x4, x5
#ifndef CONFIG_ARM64_VA_BITS_48
@ -85,14 +85,16 @@ __do_hyp_init:
ldr_l x5, idmap_t0sz
bfi x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
#endif
/*
* Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
* TCR_EL2 and VTCR_EL2.
*/
mrs x5, ID_AA64MMFR0_EL1
bfi x4, x5, #16, #3
msr tcr_el2, x4
ldr x4, =VTCR_EL2_FLAGS
/*
* Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
* VTCR_EL2.
*/
mrs x5, ID_AA64MMFR0_EL1
bfi x4, x5, #16, #3
/*
* Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS bit in

8
arch/arm64/kvm/hyp/switch.c
View File

@ -36,7 +36,11 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
write_sysreg(val, hcr_el2);
/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
write_sysreg(1 << 15, hstr_el2);
write_sysreg(CPTR_EL2_TTA | CPTR_EL2_TFP, cptr_el2);
val = CPTR_EL2_DEFAULT;
val |= CPTR_EL2_TTA | CPTR_EL2_TFP;
write_sysreg(val, cptr_el2);
write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
}
@ -45,7 +49,7 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
write_sysreg(HCR_RW, hcr_el2);
write_sysreg(0, hstr_el2);
write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2);
write_sysreg(0, cptr_el2);
write_sysreg(CPTR_EL2_DEFAULT, cptr_el2);
}
static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu)

20
arch/arm64/kvm/hyp/vgic-v3-sr.c
View File

@ -147,16 +147,6 @@ void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
max_lr_idx = vtr_to_max_lr_idx(val);
nr_pri_bits = vtr_to_nr_pri_bits(val);
switch (nr_pri_bits) {
case 7:
write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2);
write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2);
case 6:
write_gicreg(cpu_if->vgic_ap1r[1], ICH_AP1R1_EL2);
default:
write_gicreg(cpu_if->vgic_ap1r[0], ICH_AP1R0_EL2);
}
switch (nr_pri_bits) {
case 7:
write_gicreg(cpu_if->vgic_ap0r[3], ICH_AP0R3_EL2);
@ -167,6 +157,16 @@ void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
write_gicreg(cpu_if->vgic_ap0r[0], ICH_AP0R0_EL2);
}
switch (nr_pri_bits) {
case 7:
write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2);
write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2);
case 6:
write_gicreg(cpu_if->vgic_ap1r[1], ICH_AP1R1_EL2);
default:
write_gicreg(cpu_if->vgic_ap1r[0], ICH_AP1R0_EL2);
}
switch (max_lr_idx) {
case 15:
write_gicreg(cpu_if->vgic_lr[VGIC_V3_LR_INDEX(15)], ICH_LR15_EL2);

38
arch/arm64/kvm/inject_fault.c
View File

@ -27,7 +27,11 @@
#define PSTATE_FAULT_BITS_64 (PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \
PSR_I_BIT | PSR_D_BIT)
#define EL1_EXCEPT_SYNC_OFFSET 0x200
#define CURRENT_EL_SP_EL0_VECTOR 0x0
#define CURRENT_EL_SP_ELx_VECTOR 0x200
#define LOWER_EL_AArch64_VECTOR 0x400
#define LOWER_EL_AArch32_VECTOR 0x600
static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)
{
@ -97,6 +101,34 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt,
*fsr = 0x14;
}
enum exception_type {
except_type_sync = 0,
except_type_irq = 0x80,
except_type_fiq = 0x100,
except_type_serror = 0x180,
};
static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type)
{
u64 exc_offset;
switch (*vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT)) {
case PSR_MODE_EL1t:
exc_offset = CURRENT_EL_SP_EL0_VECTOR;
break;
case PSR_MODE_EL1h:
exc_offset = CURRENT_EL_SP_ELx_VECTOR;
break;
case PSR_MODE_EL0t:
exc_offset = LOWER_EL_AArch64_VECTOR;
break;
default:
exc_offset = LOWER_EL_AArch32_VECTOR;
}
return vcpu_sys_reg(vcpu, VBAR_EL1) + exc_offset + type;
}
static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
{
unsigned long cpsr = *vcpu_cpsr(vcpu);
@ -108,8 +140,8 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
*vcpu_spsr(vcpu) = cpsr;
*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);
*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;
vcpu_sys_reg(vcpu, FAR_EL1) = addr;
@ -143,8 +175,8 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
*vcpu_spsr(vcpu) = cpsr;
*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);
*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;
/*
* Build an unknown exception, depending on the instruction

9
arch/arm64/kvm/sys_regs.c
View File

@ -1007,10 +1007,9 @@ static int emulate_cp(struct kvm_vcpu *vcpu,
if (likely(r->access(vcpu, params, r))) {
/* Skip instruction, since it was emulated */
kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
/* Handled */
return 0;
}
/* Handled */
return 0;
}
/* Not handled */
@ -1043,7 +1042,7 @@ static void unhandled_cp_access(struct kvm_vcpu *vcpu,
}
/**
* kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP15 access
* kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
@ -1095,7 +1094,7 @@ static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
}
/**
* kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
* kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/

2
arch/arm64/lib/strnlen.S
View File

@ -168,4 +168,4 @@ CPU_LE( lsr tmp2, tmp2, tmp4 ) /* Shift (tmp1 & 63). */
.Lhit_limit:
mov len, limit
ret
ENDPROC(strnlen)
ENDPIPROC(strnlen)

4
arch/arm64/mm/dma-mapping.c
View File

@ -933,6 +933,10 @@ static int __init __iommu_dma_init(void)
ret = register_iommu_dma_ops_notifier(&platform_bus_type);
if (!ret)
ret = register_iommu_dma_ops_notifier(&amba_bustype);
/* handle devices queued before this arch_initcall */
if (!ret)
__iommu_attach_notifier(NULL, BUS_NOTIFY_ADD_DEVICE, NULL);
return ret;
}
arch_initcall(__iommu_dma_init);

9
arch/arm64/mm/fault.c
View File

@ -371,6 +371,13 @@ static int __kprobes do_translation_fault(unsigned long addr,
return 0;
}
static int do_alignment_fault(unsigned long addr, unsigned int esr,
struct pt_regs *regs)
{
do_bad_area(addr, esr, regs);
return 0;
}
/*
* This abort handler always returns "fault".
*/
@ -418,7 +425,7 @@ static struct fault_info {
{ do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" },
{ do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" },
{ do_bad, SIGBUS, 0, "unknown 32" },
{ do_bad, SIGBUS, BUS_ADRALN, "alignment fault" },
{ do_alignment_fault, SIGBUS, BUS_ADRALN, "alignment fault" },
{ do_bad, SIGBUS, 0, "unknown 34" },
{ do_bad, SIGBUS, 0, "unknown 35" },
{ do_bad, SIGBUS, 0, "unknown 36" },

4
arch/arm64/mm/mmap.c
View File

@ -53,10 +53,10 @@ unsigned long arch_mmap_rnd(void)
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT))
rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_compat_bits) - 1);
rnd = get_random_long() & ((1UL << mmap_rnd_compat_bits) - 1);
else
#endif
rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1);
rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
return rnd << PAGE_SHIFT;
}

9
arch/m68k/configs/amiga_defconfig
View File

@ -108,6 +108,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -266,6 +268,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -366,6 +374,7 @@ CONFIG_ARIADNE=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_HYDRA=y
CONFIG_APNE=y
CONFIG_ZORRO8390=y

9
arch/m68k/configs/apollo_defconfig
View File

@ -106,6 +106,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -264,6 +266,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -344,6 +352,7 @@ CONFIG_VETH=m
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set

9
arch/m68k/configs/atari_defconfig
View File

@ -106,6 +106,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -264,6 +266,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -353,6 +361,7 @@ CONFIG_ATARILANCE=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NE2000=y
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set

9
arch/m68k/configs/bvme6000_defconfig
View File

@ -104,6 +104,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -262,6 +264,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -343,6 +351,7 @@ CONFIG_BVME6000_NET=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set

9
arch/m68k/configs/hp300_defconfig
View File

@ -106,6 +106,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -264,6 +266,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -345,6 +353,7 @@ CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set

9
arch/m68k/configs/mac_defconfig
View File

@ -105,6 +105,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -266,6 +268,12 @@ CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -362,6 +370,7 @@ CONFIG_MAC89x0=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_MACSONIC=y
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_MAC8390=y
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set

9
arch/m68k/configs/multi_defconfig
View File

@ -115,6 +115,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -276,6 +278,12 @@ CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -404,6 +412,7 @@ CONFIG_MVME16x_NET=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_MACSONIC=y
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_HYDRA=y
CONFIG_MAC8390=y
CONFIG_NE2000=y

9
arch/m68k/configs/mvme147_defconfig
View File

@ -103,6 +103,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -261,6 +263,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -343,6 +351,7 @@ CONFIG_MVME147_NET=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set

9
arch/m68k/configs/mvme16x_defconfig
View File

@ -104,6 +104,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -262,6 +264,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -343,6 +351,7 @@ CONFIG_MVME16x_NET=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set

9
arch/m68k/configs/q40_defconfig
View File

@ -104,6 +104,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -262,6 +264,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -352,6 +360,7 @@ CONFIG_VETH=m
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NE2000=y
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set

9
arch/m68k/configs/sun3_defconfig
View File

@ -101,6 +101,8 @@ CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@ -259,6 +261,12 @@ CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DAT=y
@ -340,6 +348,7 @@ CONFIG_SUN3_82586=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set

Some files were not shown because too many files have changed in this diff Show More