mirror of https://gitee.com/openkylin/linux.git
sky2: better power state management
Improve power management and error handling by using pci_set_power_state(), instead of driver doing PCI PM register changes in the driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
parent
1d39ed565c
commit
ae306cca3a
|
@ -192,76 +192,52 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
|
|||
return v;
|
||||
}
|
||||
|
||||
static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
|
||||
|
||||
static void sky2_power_on(struct sky2_hw *hw)
|
||||
{
|
||||
u16 power_control;
|
||||
int vaux;
|
||||
/* switch power to VCC (WA for VAUX problem) */
|
||||
sky2_write8(hw, B0_POWER_CTRL,
|
||||
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
|
||||
|
||||
pr_debug("sky2_set_power_state %d\n", state);
|
||||
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
||||
/* disable Core Clock Division, */
|
||||
sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
|
||||
|
||||
power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
|
||||
vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
|
||||
(power_control & PCI_PM_CAP_PME_D3cold);
|
||||
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
|
||||
/* enable bits are inverted */
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE,
|
||||
Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
|
||||
Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
|
||||
Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
|
||||
else
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
|
||||
|
||||
power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
|
||||
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
|
||||
u32 reg1;
|
||||
|
||||
power_control |= PCI_PM_CTRL_PME_STATUS;
|
||||
power_control &= ~(PCI_PM_CTRL_STATE_MASK);
|
||||
|
||||
switch (state) {
|
||||
case PCI_D0:
|
||||
/* switch power to VCC (WA for VAUX problem) */
|
||||
sky2_write8(hw, B0_POWER_CTRL,
|
||||
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
|
||||
|
||||
/* disable Core Clock Division, */
|
||||
sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
|
||||
|
||||
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
|
||||
/* enable bits are inverted */
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE,
|
||||
Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
|
||||
Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
|
||||
Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
|
||||
else
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
|
||||
|
||||
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
|
||||
u32 reg1;
|
||||
|
||||
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
|
||||
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
|
||||
reg1 &= P_ASPM_CONTROL_MSK;
|
||||
sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
|
||||
sky2_pci_write32(hw, PCI_DEV_REG5, 0);
|
||||
}
|
||||
|
||||
break;
|
||||
|
||||
case PCI_D3hot:
|
||||
case PCI_D3cold:
|
||||
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
|
||||
else
|
||||
/* enable bits are inverted */
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE,
|
||||
Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
|
||||
Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
|
||||
Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
|
||||
|
||||
/* switch power to VAUX */
|
||||
if (vaux && state != PCI_D3cold)
|
||||
sky2_write8(hw, B0_POWER_CTRL,
|
||||
(PC_VAUX_ENA | PC_VCC_ENA |
|
||||
PC_VAUX_ON | PC_VCC_OFF));
|
||||
break;
|
||||
default:
|
||||
printk(KERN_ERR PFX "Unknown power state %d\n", state);
|
||||
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
|
||||
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
|
||||
reg1 &= P_ASPM_CONTROL_MSK;
|
||||
sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
|
||||
sky2_pci_write32(hw, PCI_DEV_REG5, 0);
|
||||
}
|
||||
}
|
||||
|
||||
sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
|
||||
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
||||
static void sky2_power_aux(struct sky2_hw *hw)
|
||||
{
|
||||
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
|
||||
else
|
||||
/* enable bits are inverted */
|
||||
sky2_write8(hw, B2_Y2_CLK_GATE,
|
||||
Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
|
||||
Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
|
||||
Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
|
||||
|
||||
/* switch power to VAUX */
|
||||
if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
|
||||
sky2_write8(hw, B0_POWER_CTRL,
|
||||
(PC_VAUX_ENA | PC_VCC_ENA |
|
||||
PC_VAUX_ON | PC_VCC_OFF));
|
||||
}
|
||||
|
||||
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
|
||||
|
@ -2480,7 +2456,7 @@ static int sky2_reset(struct sky2_hw *hw)
|
|||
++hw->ports;
|
||||
}
|
||||
|
||||
sky2_set_power_state(hw, PCI_D0);
|
||||
sky2_power_on(hw);
|
||||
|
||||
for (i = 0; i < hw->ports; i++) {
|
||||
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
|
||||
|
@ -3376,7 +3352,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
|
|||
{
|
||||
struct net_device *dev, *dev1 = NULL;
|
||||
struct sky2_hw *hw;
|
||||
int err, pm_cap, using_dac = 0;
|
||||
int err, using_dac = 0;
|
||||
|
||||
err = pci_enable_device(pdev);
|
||||
if (err) {
|
||||
|
@ -3394,15 +3370,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
|
|||
|
||||
pci_set_master(pdev);
|
||||
|
||||
/* Find power-management capability. */
|
||||
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
|
||||
if (pm_cap == 0) {
|
||||
printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
|
||||
"aborting.\n");
|
||||
err = -EIO;
|
||||
goto err_out_free_regions;
|
||||
}
|
||||
|
||||
if (sizeof(dma_addr_t) > sizeof(u32) &&
|
||||
!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
|
||||
using_dac = 1;
|
||||
|
@ -3438,7 +3405,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
|
|||
pci_name(pdev));
|
||||
goto err_out_free_hw;
|
||||
}
|
||||
hw->pm_cap = pm_cap;
|
||||
|
||||
#ifdef __BIG_ENDIAN
|
||||
/* The sk98lin vendor driver uses hardware byte swapping but
|
||||
|
@ -3555,7 +3521,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
|
|||
unregister_netdev(dev1);
|
||||
unregister_netdev(dev0);
|
||||
|
||||
sky2_set_power_state(hw, PCI_D3hot);
|
||||
sky2_power_aux(hw);
|
||||
|
||||
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
|
||||
sky2_write8(hw, B0_CTST, CS_RST_SET);
|
||||
sky2_read8(hw, B0_CTST);
|
||||
|
@ -3581,10 +3548,6 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
|
|||
{
|
||||
struct sky2_hw *hw = pci_get_drvdata(pdev);
|
||||
int i;
|
||||
pci_power_t pstate = pci_choose_state(pdev, state);
|
||||
|
||||
if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
|
||||
return -EINVAL;
|
||||
|
||||
del_timer_sync(&hw->idle_timer);
|
||||
netif_poll_disable(hw->dev[0]);
|
||||
|
@ -3599,8 +3562,10 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
|
|||
}
|
||||
|
||||
sky2_write32(hw, B0_IMSK, 0);
|
||||
sky2_power_aux(hw);
|
||||
pci_save_state(pdev);
|
||||
sky2_set_power_state(hw, pstate);
|
||||
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -3609,9 +3574,15 @@ static int sky2_resume(struct pci_dev *pdev)
|
|||
struct sky2_hw *hw = pci_get_drvdata(pdev);
|
||||
int i, err;
|
||||
|
||||
pci_restore_state(pdev);
|
||||
err = pci_set_power_state(pdev, PCI_D0);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
err = pci_restore_state(pdev);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
pci_enable_wake(pdev, PCI_D0, 0);
|
||||
sky2_set_power_state(hw, PCI_D0);
|
||||
|
||||
err = sky2_reset(hw);
|
||||
if (err)
|
||||
|
@ -3636,7 +3607,10 @@ static int sky2_resume(struct pci_dev *pdev)
|
|||
|
||||
netif_poll_enable(hw->dev[0]);
|
||||
sky2_idle_start(hw);
|
||||
return 0;
|
||||
out:
|
||||
printk(KERN_ERR PFX "%s: resume failed (%d)\n", pci_name(pdev), err);
|
||||
pci_disable_device(pdev);
|
||||
return err;
|
||||
}
|
||||
#endif
|
||||
|
|
|
@ -1887,7 +1887,6 @@ struct sky2_hw {
|
|||
struct pci_dev *pdev;
|
||||
struct net_device *dev[2];
|
||||
|
||||
int pm_cap;
|
||||
u8 chip_id;
|
||||
u8 chip_rev;
|
||||
u8 pmd_type;
|
||||
|
|
Loading…
Reference in New Issue