openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

[PATCH] sky2: remove pci-express hacks 

Eliminate special case tuning for PCI-Express. This code
causes receive hangs and doesn't help performance much anyway.

Signed-off-by: Stephen Hemminger <shemmnger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
shemminger@osdl.org 2005-11-30 11:45:21 -08:00 committed by Jeff Garzik
parent 65497dacd8
commit af4ed7e6ba
2 changed files with 6 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/net/sky2.c
View File

@ -651,12 +651,12 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len)
}
/* Setup Bus Memory Interface */
static void sky2_qset(struct sky2_hw *hw, u16 q, u32 wm)
static void sky2_qset(struct sky2_hw *hw, u16 q)
{
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
sky2_write32(hw, Q_ADDR(q, Q_WM), wm);
sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
}
/* Setup prefetch unit registers. This is the interface between
@ -921,7 +921,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
int i;
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq, is_pciex(hw) ? 0x80 : 0x600);
sky2_qset(hw, rxq);
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
rx_set_checksum(sky2);
@ -1004,7 +1004,7 @@ static int sky2_up(struct net_device *dev)
sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
RB_RST_SET);
sky2_qset(hw, txqaddr[port], 0x600);
sky2_qset(hw, txqaddr[port]);
if (hw->chip_id == CHIP_ID_YUKON_EC_U)
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
@ -2148,20 +2148,6 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
}
if (is_pciex(hw)) {
u16 pctrl;
/* change Max. Read Request Size to 2048 bytes */
pci_read_config_word(hw->pdev, PEX_DEV_CTRL, &pctrl);
pctrl &= ~PEX_DC_MAX_RRS_MSK;
pctrl |= PEX_DC_MAX_RD_RQ_SIZE(4);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_write_config_word(hw->pdev, PEX_DEV_CTRL, pctrl);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
spin_lock_bh(&hw->phy_lock);

2
drivers/net/sky2.h
View File

@ -631,6 +631,8 @@ enum {
BMU_CLR_RESET = BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR,
BMU_OPER_INIT = BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START |
BMU_FIFO_ENA | BMU_OP_ON,
BMU_WM_DEFAULT = 0x600,
};
/* Tx BMU Control / Status Registers (Yukon-2) */