ixgbe: fix smatch splat due to missing NULL check

ixgbe_ieee_ets and ixgbe_ieee_pfc are intialized at
the same time. Do a check for both before configuring
IEEE802.1Qaz. Also max_frame was causing a sparse
warning resolved here as well.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
John Fastabend 2011-10-15 05:00:10 +00:00 committed by Jeff Kirsher
parent 93d3ce8faf
commit b120818e65
1 changed files with 12 additions and 21 deletions

View File

@ -3345,34 +3345,25 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
#ifdef IXGBE_FCOE
if (adapter->netdev->features & NETIF_F_FCOE_MTU)
max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
#endif
/* reconfigure the hardware */
if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) {
#ifdef IXGBE_FCOE
if (adapter->netdev->features & NETIF_F_FCOE_MTU)
max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
#endif
ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
DCB_TX_CONFIG);
ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
DCB_RX_CONFIG);
ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
} else {
struct net_device *dev = adapter->netdev;
if (adapter->ixgbe_ieee_ets) {
struct ieee_ets *ets = adapter->ixgbe_ieee_ets;
int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame);
}
if (adapter->ixgbe_ieee_pfc) {
struct ieee_pfc *pfc = adapter->ixgbe_ieee_pfc;
u8 *prio_tc = adapter->ixgbe_ieee_ets->prio_tc;
ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en,
prio_tc);
}
} else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) {
ixgbe_dcb_hw_ets(&adapter->hw,
adapter->ixgbe_ieee_ets,
max_frame);
ixgbe_dcb_hw_pfc_config(&adapter->hw,
adapter->ixgbe_ieee_pfc->pfc_en,
adapter->ixgbe_ieee_ets->prio_tc);
}
/* Enable RSS Hash per TC */